clocksource: pass clocksource to read() callback

Pass clocksource pointer to the read() callback for clocksources.  This
allows us to share the callback between multiple instances.

[hugh@veritas.com: fix powerpc build of clocksource pass clocksource mods]
[akpm@linux-foundation.org: cleanup]
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Acked-by: John Stultz <johnstul@us.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 files changed, 10 insertions, 10 deletions

diff --git a/arch/mips/kernel/cevt-txx9.c b/arch/mips/kernel/cevt-txx9.c
index eccf7d6096b..2e911e3da8d 100644
--- a/arch/mips/kernel/cevt-txx9.c
+++ b/arch/mips/kernel/cevt-txx9.c
@@ -22,7 +22,7 @@
 
 static struct txx9_tmr_reg __iomem *txx9_cs_tmrptr;
 
-static cycle_t txx9_cs_read(void)
+static cycle_t txx9_cs_read(struct clocksource *cs)
 {
 	return __raw_readl(&txx9_cs_tmrptr->trr);
 }
diff --git a/arch/mips/kernel/csrc-bcm1480.c b/arch/mips/kernel/csrc-bcm1480.c
index 868745e7184..51489f8a825 100644
--- a/arch/mips/kernel/csrc-bcm1480.c
+++ b/arch/mips/kernel/csrc-bcm1480.c
@@ -28,7 +28,7 @@
 
 #include <asm/sibyte/sb1250.h>
 
-static cycle_t bcm1480_hpt_read(void)
+static cycle_t bcm1480_hpt_read(struct clocksource *cs)
 {
 	return (cycle_t) __raw_readq(IOADDR(A_SCD_ZBBUS_CYCLE_COUNT));
 }
diff --git a/arch/mips/kernel/csrc-ioasic.c b/arch/mips/kernel/csrc-ioasic.c
index 1d5f63cf899..b551f48d3a0 100644
--- a/arch/mips/kernel/csrc-ioasic.c
+++ b/arch/mips/kernel/csrc-ioasic.c
@@ -25,7 +25,7 @@
 #include <asm/dec/ioasic.h>
 #include <asm/dec/ioasic_addrs.h>
 
-static cycle_t dec_ioasic_hpt_read(void)
+static cycle_t dec_ioasic_hpt_read(struct clocksource *cs)
 {
 	return ioasic_read(IO_REG_FCTR);
 }
@@ -47,13 +47,13 @@ void __init dec_ioasic_clocksource_init(void)
 	while (!ds1287_timer_state())
 		;
 
-	start = dec_ioasic_hpt_read();
+	start = dec_ioasic_hpt_read(&clocksource_dec);
 
 	while (i--)
 		while (!ds1287_timer_state())
 			;
 
-	end = dec_ioasic_hpt_read();
+	end = dec_ioasic_hpt_read(&clocksource_dec);
 
 	freq = (end - start) * 10;
 	printk(KERN_INFO "I/O ASIC clock frequency %dHz\n", freq);
diff --git a/arch/mips/kernel/csrc-r4k.c b/arch/mips/kernel/csrc-r4k.c
index f1a2893931e..e95a3cd48ee 100644
--- a/arch/mips/kernel/csrc-r4k.c
+++ b/arch/mips/kernel/csrc-r4k.c
@@ -10,7 +10,7 @@
 
 #include <asm/time.h>
 
-static cycle_t c0_hpt_read(void)
+static cycle_t c0_hpt_read(struct clocksource *cs)
 {
 	return read_c0_count();
 }
diff --git a/arch/mips/kernel/csrc-sb1250.c b/arch/mips/kernel/csrc-sb1250.c
index 92212bbb8e4..d14d3d1907f 100644
--- a/arch/mips/kernel/csrc-sb1250.c
+++ b/arch/mips/kernel/csrc-sb1250.c
@@ -33,7 +33,7 @@
  * The HPT is free running from SB1250_HPT_VALUE down to 0 then starts over
  * again.
  */
-static cycle_t sb1250_hpt_read(void)
+static cycle_t sb1250_hpt_read(struct clocksource *cs)
 {
 	unsigned int count;
 
diff --git a/arch/mips/kernel/i8253.c b/arch/mips/kernel/i8253.c
index 689719e34f0..ed20e7fe65e 100644
--- a/arch/mips/kernel/i8253.c
+++ b/arch/mips/kernel/i8253.c
@@ -128,7 +128,7 @@ void __init setup_pit_timer(void)
  * to just read by itself. So use jiffies to emulate a free
  * running counter:
  */
-static cycle_t pit_read(void)
+static cycle_t pit_read(struct clocksource *cs)
 {
 	unsigned long flags;
 	int count;
diff --git a/arch/mips/nxp/pnx8550/common/time.c b/arch/mips/nxp/pnx8550/common/time.c
index cf293b27909..8df43e9e4d9 100644
--- a/arch/mips/nxp/pnx8550/common/time.c
+++ b/arch/mips/nxp/pnx8550/common/time.c
@@ -35,7 +35,7 @@
 
 static unsigned long cpj;
 
-static cycle_t hpt_read(void)
+static cycle_t hpt_read(struct clocksource *cs)
 {
 	return read_c0_count2();
 }
diff --git a/arch/mips/sgi-ip27/ip27-timer.c b/arch/mips/sgi-ip27/ip27-timer.c
index f024057a35f..f10a7cd64f7 100644
--- a/arch/mips/sgi-ip27/ip27-timer.c
+++ b/arch/mips/sgi-ip27/ip27-timer.c
@@ -159,7 +159,7 @@ static void __init hub_rt_clock_event_global_init(void)
 	setup_irq(irq, &hub_rt_irqaction);
 }
 
-static cycle_t hub_rt_read(void)
+static cycle_t hub_rt_read(struct clocksource *cs)
 {
 	return REMOTE_HUB_L(cputonasid(0), PI_RT_COUNT);
 }