MN10300: And Panasonic AM34 subarch and implement SMP

Implement the Panasonic MN10300 AM34 CPU subarch and implement SMP support for
MN10300.  Also implement support for the MN2WS0060 processor and the ASB2364
evaluation board which are AM34 based.

Signed-off-by: Akira Takeuchi <takeuchi.akr@jp.panasonic.com>
Signed-off-by: Kiyoshi Owada <owada.kiyoshi@jp.panasonic.com>
Signed-off-by: David Howells <dhowells@redhat.com>

21 files changed, 793 insertions, 100 deletions

diff --git a/arch/mn10300/include/asm/exceptions.h b/arch/mn10300/include/asm/exceptions.h
index 7d8080bc659..ca3e20508c7 100644
--- a/arch/mn10300/include/asm/exceptions.h
+++ b/arch/mn10300/include/asm/exceptions.h
@@ -114,6 +114,8 @@ extern void die(const char *, struct pt_regs *, enum exception_code)
 
 extern int die_if_no_fixup(const char *, struct pt_regs *, enum exception_code);
 
+#define NUM2EXCEP_IRQ_LEVEL(num)	(EXCEP_IRQ_LEVEL0 + (num) * 8)
+
 #endif /* __ASSEMBLY__ */
 
 #endif /* _ASM_EXCEPTIONS_H */
diff --git a/arch/mn10300/include/asm/frame.inc b/arch/mn10300/include/asm/frame.inc
index 5b1949bdf03..406060e5e1c 100644
--- a/arch/mn10300/include/asm/frame.inc
+++ b/arch/mn10300/include/asm/frame.inc
@@ -18,6 +18,9 @@
 #ifndef __ASM_OFFSETS_H__
 #include <asm/asm-offsets.h>
 #endif
+#ifdef CONFIG_SMP
+#include <proc/smp-regs.h>
+#endif
 
 #define pi break
 
@@ -37,9 +40,25 @@
 	movm	[d2,d3,a2,a3,exreg0,exreg1,exother],(sp)
 	mov	sp,fp				# FRAME pointer in A3
 	add	-12,sp				# allow for calls to be made
+#ifdef CONFIG_SMP
+#ifdef CONFIG_PREEMPT /* FIXME */
+	mov	epsw,d2
+	and	~EPSW_IE,epsw
+#endif
+	mov	(CPUID),a0
+	add	a0,a0
+	add	a0,a0
+	mov	(___frame,a0),a1
+	mov	a1,(REG_NEXT,fp)
+	mov	fp,(___frame,a0)
+#ifdef CONFIG_PREEMPT /* FIXME */
+	mov	d2,epsw
+#endif
+#else  /* CONFIG_SMP */
 	mov	(__frame),a1
 	mov	a1,(REG_NEXT,fp)
 	mov	fp,(__frame)
+#endif /* CONFIG_SMP */
 
 	and	~EPSW_FE,epsw			# disable the FPU inside the kernel
 
@@ -57,10 +76,27 @@
 .macro RESTORE_ALL
 	# peel back the stack to the calling frame
 	# - this permits execve() to discard extra frames due to kernel syscalls
+#ifdef  CONFIG_SMP
+#ifdef CONFIG_PREEMPT /* FIXME */
+	mov	epsw,d2
+	and	~EPSW_IE,epsw
+#endif
+	mov	(CPUID),a0
+	add	a0,a0
+	add	a0,a0
+	mov	(___frame,a0),fp
+	mov	fp,sp
+	mov	(REG_NEXT,fp),d0                # userspace has regs->next == 0
+	mov	d0,(___frame,a0)
+#ifdef CONFIG_PREEMPT /* FIXME */
+	mov	d2,epsw
+#endif
+#else   /* CONFIG_SMP */
 	mov	(__frame),fp
 	mov	fp,sp
 	mov	(REG_NEXT,fp),d0                # userspace has regs->next == 0
 	mov	d0,(__frame)
+#endif  /* CONFIG_SMP */
 
 #ifndef CONFIG_MN10300_USING_JTAG
 	mov	(REG_EPSW,fp),d0
diff --git a/arch/mn10300/include/asm/hardirq.h b/arch/mn10300/include/asm/hardirq.h
index 7bd9b7cc245..0000d650b55 100644
--- a/arch/mn10300/include/asm/hardirq.h
+++ b/arch/mn10300/include/asm/hardirq.h
@@ -19,8 +19,10 @@
 /* assembly code in softirq.h is sensitive to the offsets of these fields */
 typedef struct {
 	unsigned int	__softirq_pending;
+#ifdef CONFIG_MN10300_WD_TIMER
 	unsigned int	__nmi_count;	/* arch dependent */
 	unsigned int	__irq_count;	/* arch dependent */
+#endif
 } ____cacheline_aligned irq_cpustat_t;
 
 #include <linux/irq_cpustat.h>	/* Standard mappings for irq_cpustat_t above */
diff --git a/arch/mn10300/include/asm/intctl-regs.h b/arch/mn10300/include/asm/intctl-regs.h
index ba544c796c5..585b708c2bc 100644
--- a/arch/mn10300/include/asm/intctl-regs.h
+++ b/arch/mn10300/include/asm/intctl-regs.h
@@ -15,24 +15,19 @@
 
 #ifdef __KERNEL__
 
-/* interrupt controller registers */
-#define GxICR(X)		__SYSREG(0xd4000000 + (X) * 4, u16)	/* group irq ctrl regs */
-
-#define IAGR			__SYSREG(0xd4000100, u16)	/* intr acceptance group reg */
-#define IAGR_GN			0x00fc		/* group number register
-						 * (documentation _has_ to be wrong)
-						 */
+/*
+ * Interrupt controller registers
+ * - Registers 64-191 are at addresses offset from the main array
+ */
+#define GxICR(X)						\
+	__SYSREG(0xd4000000 + (X) * 4 +				\
+		 (((X) >= 64) && ((X) < 192)) * 0xf00, u16)
 
-#define EXTMD			__SYSREG(0xd4000200, u16)	/* external pin intr spec reg */
-#define GET_XIRQ_TRIGGER(X) ((EXTMD >> ((X) * 2)) & 3)
+#define GxICR_u8(X)							\
+	__SYSREG(0xd4000000 + (X) * 4 +					\
+		 (((X) >= 64) && ((X) < 192)) * 0xf00, u8)
 
-#define SET_XIRQ_TRIGGER(X,Y)			\
-do {						\
-	u16 x = EXTMD;				\
-	x &= ~(3 << ((X) * 2));			\
-	x |= ((Y) & 3) << ((X) * 2);		\
-	EXTMD = x;				\
-} while (0)
+#include <proc/intctl-regs.h>
 
 #define XIRQ_TRIGGER_LOWLEVEL	0
 #define XIRQ_TRIGGER_HILEVEL	1
@@ -59,10 +54,18 @@ do {						\
 #define GxICR_LEVEL_5		0x5000		/* - level 5 */
 #define GxICR_LEVEL_6		0x6000		/* - level 6 */
 #define GxICR_LEVEL_SHIFT	12
+#define GxICR_NMI		0x8000		/* nmi request flag */
+
+#define NUM2GxICR_LEVEL(num)	((num) << GxICR_LEVEL_SHIFT)
 
 #ifndef __ASSEMBLY__
 extern void set_intr_level(int irq, u16 level);
-extern void set_intr_postackable(int irq);
+extern void mn10300_intc_set_level(unsigned int irq, unsigned int level);
+extern void mn10300_intc_clear(unsigned int irq);
+extern void mn10300_intc_set(unsigned int irq);
+extern void mn10300_intc_enable(unsigned int irq);
+extern void mn10300_intc_disable(unsigned int irq);
+extern void mn10300_set_lateack_irq_type(int irq);
 #endif
 
 /* external interrupts */
diff --git a/arch/mn10300/include/asm/irq.h b/arch/mn10300/include/asm/irq.h
index 25c045d16d1..b7b8e175b16 100644
--- a/arch/mn10300/include/asm/irq.h
+++ b/arch/mn10300/include/asm/irq.h
@@ -22,7 +22,11 @@
 #define NO_IRQ		INT_MAX
 
 /* hardware irq numbers */
+#ifdef CONFIG_SMP
+#define NR_IRQS		GxICR_NUM_EXT_IRQS
+#else
 #define NR_IRQS		GxICR_NUM_IRQS
+#endif
 
 /* external hardware irq numbers */
 #define NR_XIRQS	GxICR_NUM_XIRQS
diff --git a/arch/mn10300/include/asm/irqflags.h b/arch/mn10300/include/asm/irqflags.h
index b3ab2071354..7a7ae12c711 100644
--- a/arch/mn10300/include/asm/irqflags.h
+++ b/arch/mn10300/include/asm/irqflags.h
@@ -13,6 +13,9 @@
 #define _ASM_IRQFLAGS_H
 
 #include <asm/cpu-regs.h>
+#ifndef __ASSEMBLY__
+#include <linux/smp.h>
+#endif
 
 /*
  * interrupt control
@@ -60,11 +63,12 @@ static inline unsigned long arch_local_irq_save(void)
 /*
  * we make sure arch_irq_enable() doesn't cause priority inversion
  */
-extern unsigned long __mn10300_irq_enabled_epsw;
+extern unsigned long __mn10300_irq_enabled_epsw[];
 
 static inline void arch_local_irq_enable(void)
 {
 	unsigned long tmp;
+	int cpu = raw_smp_processor_id();
 
 	asm volatile(
 		"	mov	epsw,%0		\n"
@@ -72,8 +76,8 @@ static inline void arch_local_irq_enable(void)
 		"	or	%2,%0		\n"
 		"	mov	%0,epsw		\n"
 		: "=&d"(tmp)
-		: "i"(~EPSW_IM), "r"(__mn10300_irq_enabled_epsw)
-		: "memory");
+		: "i"(~EPSW_IM), "r"(__mn10300_irq_enabled_epsw[cpu])
+		: "memory", "cc");
 }
 
 static inline void arch_local_irq_restore(unsigned long flags)
@@ -105,6 +109,9 @@ static inline bool arch_irqs_disabled(void)
  */
 static inline void arch_safe_halt(void)
 {
+#ifdef CONFIG_SMP
+	arch_local_irq_enable();
+#else
 	asm volatile(
 		"	or	%0,epsw	\n"
 		"	nop		\n"
@@ -113,8 +120,21 @@ static inline void arch_safe_halt(void)
 		:
 		: "i"(EPSW_IE|EPSW_IM), "n"(&CPUM), "i"(CPUM_SLEEP)
 		: "cc");
+#endif
 }
 
+#define __sleep_cpu()				\
+do {						\
+	asm volatile(				\
+		"	bset	%1,(%0)\n"	\
+		"1:	btst	%1,(%0)\n"	\
+		"	bne	1b\n"		\
+		:				\
+		: "i"(&CPUM), "i"(CPUM_SLEEP)	\
+		: "cc"				\
+		);				\
+} while (0)
+
 static inline void arch_local_cli(void)
 {
 	asm volatile(
diff --git a/arch/mn10300/include/asm/pgtable.h b/arch/mn10300/include/asm/pgtable.h
index 05dda641af8..cd568bf5407 100644
--- a/arch/mn10300/include/asm/pgtable.h
+++ b/arch/mn10300/include/asm/pgtable.h
@@ -90,9 +90,15 @@ extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
  * The vmalloc() routines also leaves a hole of 4kB between each vmalloced
  * area to catch addressing errors.
  */
+#ifndef __ASSEMBLY__
+#define VMALLOC_OFFSET	(8UL * 1024 * 1024)
+#define VMALLOC_START	(0x70000000UL)
+#define VMALLOC_END	(0x7C000000UL)
+#else
 #define VMALLOC_OFFSET	(8 * 1024 * 1024)
 #define VMALLOC_START	(0x70000000)
 #define VMALLOC_END	(0x7C000000)
+#endif
 
 #ifndef __ASSEMBLY__
 extern pte_t kernel_vmalloc_ptes[(VMALLOC_END - VMALLOC_START) / PAGE_SIZE];
@@ -329,11 +335,7 @@ static inline int pte_exec_kernel(pte_t pte)
 	return 1;
 }
 
-/*
- * Bits 0 and 1 are taken, split up the 29 bits of offset
- * into this range:
- */
-#define PTE_FILE_MAX_BITS	29
+#define PTE_FILE_MAX_BITS	30
 
 #define pte_to_pgoff(pte)	(pte_val(pte) >> 2)
 #define pgoff_to_pte(off)	__pte((off) << 2 | _PAGE_FILE)
@@ -379,8 +381,13 @@ static inline void ptep_mkdirty(pte_t *ptep)
  * Macro to mark a page protection value as "uncacheable".  On processors which
  * do not support it, this is a no-op.
  */
-#define pgprot_noncached(prot)	__pgprot(pgprot_val(prot) | _PAGE_CACHE)
+#define pgprot_noncached(prot)	__pgprot(pgprot_val(prot) & ~_PAGE_CACHE)
 
+/*
+ * Macro to mark a page protection value as "Write-Through".
+ * On processors which do not support it, this is a no-op.
+ */
+#define pgprot_through(prot)	__pgprot(pgprot_val(prot) | _PAGE_CACHE_WT)
 
 /*
  * Conversion functions: convert a page and protection to a page entry,
diff --git a/arch/mn10300/include/asm/processor.h b/arch/mn10300/include/asm/processor.h
index 0032fc76c8b..75c422abcd6 100644
--- a/arch/mn10300/include/asm/processor.h
+++ b/arch/mn10300/include/asm/processor.h
@@ -33,6 +33,8 @@ struct mm_struct;
 	__pc;					\
 })
 
+extern void get_mem_info(unsigned long *mem_base, unsigned long *mem_size);
+
 extern void show_registers(struct pt_regs *regs);
 
 /*
@@ -43,17 +45,22 @@ extern void show_registers(struct pt_regs *regs);
 
 struct mn10300_cpuinfo {
 	int		type;
-	unsigned long	loops_per_sec;
+	unsigned long	loops_per_jiffy;
 	char		hard_math;
-	unsigned long	*pgd_quick;
-	unsigned long	*pte_quick;
-	unsigned long	pgtable_cache_sz;
 };
 
 extern struct mn10300_cpuinfo boot_cpu_data;
 
+#ifdef CONFIG_SMP
+#if CONFIG_NR_CPUS < 2 || CONFIG_NR_CPUS > 8
+# error Sorry, NR_CPUS should be 2 to 8
+#endif
+extern struct mn10300_cpuinfo cpu_data[];
+#define current_cpu_data cpu_data[smp_processor_id()]
+#else  /* CONFIG_SMP */
 #define cpu_data &boot_cpu_data
 #define current_cpu_data boot_cpu_data
+#endif /* CONFIG_SMP */
 
 extern void identify_cpu(struct mn10300_cpuinfo *);
 extern void print_cpu_info(struct mn10300_cpuinfo *);
@@ -92,21 +99,21 @@ struct thread_struct {
 	unsigned long		a3;		/* kernel FP */
 	unsigned long		wchan;
 	unsigned long		usp;
-	struct pt_regs		*__frame;
+	struct pt_regs		*frame;
 	unsigned long		fpu_flags;
 #define THREAD_USING_FPU	0x00000001	/* T if this task is using the FPU */
 #define THREAD_HAS_FPU		0x00000002	/* T if this task owns the FPU right now */
 	struct fpu_state_struct	fpu_state;
 };
 
-#define INIT_THREAD				\
-{						\
-	.uregs		= init_uregs,		\
-	.pc		= 0,			\
-	.sp		= 0,			\
-	.a3		= 0,			\
-	.wchan		= 0,			\
-	.__frame	= NULL,			\
+#define INIT_THREAD		\
+{				\
+	.uregs	= init_uregs,	\
+	.pc	= 0,		\
+	.sp	= 0,		\
+	.a3	= 0,		\
+	.wchan	= 0,		\
+	.frame	= NULL,		\
 }
 
 #define INIT_MMAP \
@@ -118,6 +125,19 @@ struct thread_struct {
  * - need to discard the frame stacked by the kernel thread invoking the execve
  *   syscall (see RESTORE_ALL macro)
  */
+#if defined(CONFIG_SMP) && defined(CONFIG_PREEMPT) /* FIXME */
+#define start_thread(regs, new_pc, new_sp) do {		\
+	int cpu;					\
+	preempt_disable();				\
+	cpu = CPUID;					\
+	set_fs(USER_DS);				\
+	___frame[cpu] = current->thread.uregs;		\
+	___frame[cpu]->epsw = EPSW_nSL | EPSW_IE | EPSW_IM;\
+	___frame[cpu]->pc = new_pc;			\
+	___frame[cpu]->sp = new_sp;			\
+	preempt_enable();				\
+} while (0)
+#else  /* CONFIG_SMP && CONFIG_PREEMPT */
 #define start_thread(regs, new_pc, new_sp) do {		\
 	set_fs(USER_DS);				\
 	__frame = current->thread.uregs;		\
@@ -125,6 +145,7 @@ struct thread_struct {
 	__frame->pc = new_pc;				\
 	__frame->sp = new_sp;				\
 } while (0)
+#endif /* CONFIG_SMP && CONFIG_PREEMPT */
 
 /* Free all resources held by a thread. */
 extern void release_thread(struct task_struct *);
diff --git a/arch/mn10300/include/asm/ptrace.h b/arch/mn10300/include/asm/ptrace.h
index 7c2e911052b..c2b77bd3064 100644
--- a/arch/mn10300/include/asm/ptrace.h
+++ b/arch/mn10300/include/asm/ptrace.h
@@ -40,7 +40,6 @@
 #define	PT_PC		26
 #define NR_PTREGS	27
 
-#ifndef __ASSEMBLY__
 /*
  * This defines the way registers are stored in the event of an exception
  * - the strange order is due to the MOVM instruction
@@ -75,7 +74,6 @@ struct pt_regs {
 	unsigned long		epsw;
 	unsigned long		pc;
 };
-#endif
 
 /* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */
 #define PTRACE_GETREGS            12
@@ -86,12 +84,13 @@ struct pt_regs {
 /* options set using PTRACE_SETOPTIONS */
 #define PTRACE_O_TRACESYSGOOD     0x00000001
 
-#if defined(__KERNEL__)
+#ifdef __KERNEL__
 
+#ifdef CONFIG_SMP
+extern struct pt_regs *___frame[];	/* current frame pointer */
+#else
 extern struct pt_regs *__frame;		/* current frame pointer */
-
-#if !defined(__ASSEMBLY__)
-struct task_struct;
+#endif
 
 #define user_mode(regs)			(((regs)->epsw & EPSW_nSL) == EPSW_nSL)
 #define instruction_pointer(regs)	((regs)->pc)
@@ -100,9 +99,7 @@ extern void show_regs(struct pt_regs *);
 
 #define arch_has_single_step()	(1)
 
-#endif  /*  !__ASSEMBLY  */
-
 #define profile_pc(regs) ((regs)->pc)
 
-#endif  /*  __KERNEL__  */
+#endif /* __KERNEL__  */
 #endif /* _ASM_PTRACE_H */
diff --git a/arch/mn10300/include/asm/reset-regs.h b/arch/mn10300/include/asm/reset-regs.h
index 174523d5013..10c7502a113 100644
--- a/arch/mn10300/include/asm/reset-regs.h
+++ b/arch/mn10300/include/asm/reset-regs.h
@@ -50,7 +50,7 @@ static inline void mn10300_proc_hard_reset(void)
 	RSTCTR |= RSTCTR_CHIPRST;
 }
 
-extern unsigned int watchdog_alert_counter;
+extern unsigned int watchdog_alert_counter[];
 
 extern void watchdog_go(void);
 extern asmlinkage void watchdog_handler(void);
diff --git a/arch/mn10300/include/asm/rtc.h b/arch/mn10300/include/asm/rtc.h
index c295194cc70..6c14bb1d0d9 100644
--- a/arch/mn10300/include/asm/rtc.h
+++ b/arch/mn10300/include/asm/rtc.h
@@ -15,25 +15,14 @@
 
 #include <linux/init.h>
 
-extern void check_rtc_time(void);
 extern void __init calibrate_clock(void);
-extern unsigned long __init get_initial_rtc_time(void);
 
 #else /* !CONFIG_MN10300_RTC */
 
-static inline void check_rtc_time(void)
-{
-}
-
 static inline void calibrate_clock(void)
 {
 }
 
-static inline unsigned long get_initial_rtc_time(void)
-{
-	return 0;
-}
-
 #endif /* !CONFIG_MN10300_RTC */
 
 #include <asm-generic/rtc.h>
diff --git a/arch/mn10300/include/asm/rwlock.h b/arch/mn10300/include/asm/rwlock.h
new file mode 100644
index 00000000000..6d594d4a0e1
--- /dev/null
+++ b/arch/mn10300/include/asm/rwlock.h
@@ -0,0 +1,125 @@
+/*
+ * Helpers used by both rw spinlocks and rw semaphores.
+ *
+ * Based in part on code from semaphore.h and
+ * spinlock.h Copyright 1996 Linus Torvalds.
+ *
+ * Copyright 1999 Red Hat, Inc.
+ *
+ * Written by Benjamin LaHaise.
+ *
+ * Modified by Matsushita Electric Industrial Co., Ltd.
+ * Modifications:
+ * 13-Nov-2006 MEI Temporarily delete lock functions for SMP support.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+#ifndef _ASM_RWLOCK_H
+#define _ASM_RWLOCK_H
+
+#define RW_LOCK_BIAS		 0x01000000
+
+#ifndef CONFIG_SMP
+
+typedef struct { unsigned long a[100]; } __dummy_lock_t;
+#define __dummy_lock(lock) (*(__dummy_lock_t *)(lock))
+
+#define RW_LOCK_BIAS_STR	"0x01000000"
+
+#define __build_read_lock_ptr(rw, helper)				\
+	do {								\
+		asm volatile(						\
+			"	mov	(%0),d3			\n"	\
+			"	sub	1,d3			\n"	\
+			"	mov	d3,(%0)			\n"	\
+			"	blt	1f			\n"	\
+			"	bra	2f			\n"	\
+			"1:	jmp	3f			\n"	\
+			"2:					\n"	\
+			"	.section .text.lock,\"ax\"	\n"	\
+			"3:	call	"helper"[],0		\n"	\
+			"	jmp	2b			\n"	\
+			"	.previous"				\
+			:						\
+			: "d" (rw)					\
+			: "memory", "d3", "cc");			\
+	} while (0)
+
+#define __build_read_lock_const(rw, helper)				\
+	do {								\
+		asm volatile(						\
+			"	mov	(%0),d3			\n"	\
+			"	sub	1,d3			\n"	\
+			"	mov	d3,(%0)			\n"	\
+			"	blt	1f			\n"	\
+			"	bra	2f			\n"	\
+			"1:	jmp	3f			\n"	\
+			"2:					\n"	\
+			"	.section .text.lock,\"ax\"	\n"	\
+			"3:	call	"helper"[],0		\n"	\
+			"	jmp	2b			\n"	\
+			"	.previous"				\
+			:						\
+			: "d" (rw)					\
+			: "memory", "d3", "cc");			\
+	} while (0)
+
+#define __build_read_lock(rw, helper) \
+	do {								\
+		if (__builtin_constant_p(rw))				\
+			__build_read_lock_const(rw, helper);		\
+		else							\
+			__build_read_lock_ptr(rw, helper);		\
+	} while (0)
+
+#define __build_write_lock_ptr(rw, helper)				\
+	do {								\
+		asm volatile(						\
+			"	mov	(%0),d3			\n"	\
+			"	sub	1,d3			\n"	\
+			"	mov	d3,(%0)			\n"	\
+			"	blt	1f			\n"	\
+			"	bra	2f			\n"	\
+			"1:	jmp	3f			\n"	\
+			"2:					\n"	\
+			"	.section .text.lock,\"ax\"	\n"	\
+			"3:	call	"helper"[],0		\n"	\
+			"	jmp	2b			\n"	\
+			"	.previous"				\
+			:						\
+			: "d" (rw)					\
+			: "memory", "d3", "cc");			\
+	} while (0)
+
+#define __build_write_lock_const(rw, helper)				\
+	do {								\
+		asm volatile(						\
+			"	mov	(%0),d3			\n"	\
+			"	sub	1,d3			\n"	\
+			"	mov	d3,(%0)			\n"	\
+			"	blt	1f			\n"	\
+			"	bra	2f			\n"	\
+			"1:	jmp	3f			\n"	\
+			"2:					\n"	\
+			"	.section .text.lock,\"ax\"	\n"	\
+			"3:	call	"helper"[],0		\n"	\
+			"	jmp	2b			\n"	\
+			"	.previous"				\
+			:						\
+			: "d" (rw)					\
+			: "memory", "d3", "cc");			\
+	} while (0)
+
+#define __build_write_lock(rw, helper)					\
+	do {								\
+		if (__builtin_constant_p(rw))				\
+			__build_write_lock_const(rw, helper);		\
+		else							\
+			__build_write_lock_ptr(rw, helper);		\
+	} while (0)
+
+#endif /* CONFIG_SMP */
+#endif /* _ASM_RWLOCK_H */
diff --git a/arch/mn10300/include/asm/serial-regs.h b/arch/mn10300/include/asm/serial-regs.h
index 6498469e93a..8320cda32f5 100644
--- a/arch/mn10300/include/asm/serial-regs.h
+++ b/arch/mn10300/include/asm/serial-regs.h
@@ -20,18 +20,25 @@
 /* serial port 0 */
 #define	SC0CTR			__SYSREG(0xd4002000, u16)	/* control reg */
 #define	SC01CTR_CK		0x0007	/* clock source select */
-#define	SC0CTR_CK_TM8UFLOW_8	0x0000	/* - 1/8 timer 8 underflow (serial port 0 only) */
-#define	SC1CTR_CK_TM9UFLOW_8	0x0000	/* - 1/8 timer 9 underflow (serial port 1 only) */
 #define	SC01CTR_CK_IOCLK_8	0x0001	/* - 1/8 IOCLK */
 #define	SC01CTR_CK_IOCLK_32	0x0002	/* - 1/32 IOCLK */
+#define	SC01CTR_CK_EXTERN_8	0x0006	/* - 1/8 external closk */
+#define	SC01CTR_CK_EXTERN	0x0007	/* - external closk */
+#if defined(CONFIG_AM33_2) || defined(CONFIG_AM33_3)
+#define	SC0CTR_CK_TM8UFLOW_8	0x0000	/* - 1/8 timer 8 underflow (serial port 0 only) */
 #define	SC0CTR_CK_TM2UFLOW_2	0x0003	/* - 1/2 timer 2 underflow (serial port 0 only) */
-#define	SC1CTR_CK_TM3UFLOW_2	0x0003	/* - 1/2 timer 3 underflow (serial port 1 only) */
-#define	SC0CTR_CK_TM0UFLOW_8	0x0004	/* - 1/8 timer 1 underflow (serial port 0 only) */
-#define	SC1CTR_CK_TM1UFLOW_8	0x0004	/* - 1/8 timer 2 underflow (serial port 1 only) */
+#define	SC0CTR_CK_TM0UFLOW_8	0x0004	/* - 1/8 timer 0 underflow (serial port 0 only) */
 #define	SC0CTR_CK_TM2UFLOW_8	0x0005	/* - 1/8 timer 2 underflow (serial port 0 only) */
+#define	SC1CTR_CK_TM9UFLOW_8	0x0000	/* - 1/8 timer 9 underflow (serial port 1 only) */
+#define	SC1CTR_CK_TM3UFLOW_2	0x0003	/* - 1/2 timer 3 underflow (serial port 1 only) */
+#define	SC1CTR_CK_TM1UFLOW_8	0x0004	/* - 1/8 timer 1 underflow (serial port 1 only) */
 #define	SC1CTR_CK_TM3UFLOW_8	0x0005	/* - 1/8 timer 3 underflow (serial port 1 only) */
-#define	SC01CTR_CK_EXTERN_8	0x0006	/* - 1/8 external closk */
-#define	SC01CTR_CK_EXTERN	0x0007	/* - external closk */
+#else  /* CONFIG_AM33_2 || CONFIG_AM33_3 */
+#define	SC0CTR_CK_TM8UFLOW_8	0x0000	/* - 1/8 timer 8 underflow (serial port 0 only) */
+#define	SC0CTR_CK_TM0UFLOW_8	0x0004	/* - 1/8 timer 0 underflow (serial port 0 only) */
+#define	SC0CTR_CK_TM2UFLOW_8	0x0005	/* - 1/8 timer 2 underflow (serial port 0 only) */
+#define	SC1CTR_CK_TM12UFLOW_8	0x0000	/* - 1/8 timer 12 underflow (serial port 1 only) */
+#endif /* CONFIG_AM33_2 || CONFIG_AM33_3 */
 #define	SC01CTR_STB		0x0008	/* stop bit select */
 #define	SC01CTR_STB_1BIT	0x0000	/* - 1 stop bit */
 #define	SC01CTR_STB_2BIT	0x0008	/* - 2 stop bits */
@@ -100,11 +107,23 @@
 
 /* serial port 2 */
 #define	SC2CTR			__SYSREG(0xd4002020, u16)	/* control reg */
+#ifdef CONFIG_AM33_2
 #define	SC2CTR_CK		0x0003	/* clock source select */
 #define	SC2CTR_CK_TM10UFLOW	0x0000	/* - timer 10 underflow */
 #define	SC2CTR_CK_TM2UFLOW	0x0001	/* - timer 2 underflow */
 #define	SC2CTR_CK_EXTERN	0x0002	/* - external closk */
 #define	SC2CTR_CK_TM3UFLOW	0x0003	/* - timer 3 underflow */
+#else  /* CONFIG_AM33_2 */
+#define	SC2CTR_CK		0x0007	/* clock source select */
+#define	SC2CTR_CK_TM9UFLOW_8	0x0000	/* - 1/8 timer 9 underflow */
+#define	SC2CTR_CK_IOCLK_8	0x0001	/* - 1/8 IOCLK */
+#define	SC2CTR_CK_IOCLK_32	0x0002	/* - 1/32 IOCLK */
+#define	SC2CTR_CK_TM3UFLOW_2	0x0003	/* - 1/2 timer 3 underflow */
+#define	SC2CTR_CK_TM1UFLOW_8	0x0004	/* - 1/8 timer 1 underflow */
+#define	SC2CTR_CK_TM3UFLOW_8	0x0005	/* - 1/8 timer 3 underflow */
+#define	SC2CTR_CK_EXTERN_8	0x0006	/* - 1/8 external closk */
+#define	SC2CTR_CK_EXTERN	0x0007	/* - external closk */
+#endif /* CONFIG_AM33_2 */
 #define	SC2CTR_STB		0x0008	/* stop bit select */
 #define	SC2CTR_STB_1BIT		0x0000	/* - 1 stop bit */
 #define	SC2CTR_STB_2BIT		0x0008	/* - 2 stop bits */
@@ -134,9 +153,14 @@
 #define SC2ICR_RES		0x04	/* receive error select */
 #define SC2ICR_RI		0x01	/* receive interrupt cause */
 
-#define	SC2TXB			__SYSREG(0xd4002018, u8)	/* transmit buffer reg */
-#define	SC2RXB			__SYSREG(0xd4002019, u8)	/* receive buffer reg */
-#define	SC2STR			__SYSREG(0xd400201c, u8)	/* status reg */
+#define	SC2TXB			__SYSREG(0xd4002028, u8)	/* transmit buffer reg */
+#define	SC2RXB			__SYSREG(0xd4002029, u8)	/* receive buffer reg */
+
+#ifdef CONFIG_AM33_2
+#define	SC2STR			__SYSREG(0xd400202c, u8)	/* status reg */
+#else  /* CONFIG_AM33_2 */
+#define	SC2STR			__SYSREG(0xd400202c, u16)	/* status reg */
+#endif /* CONFIG_AM33_2 */
 #define SC2STR_OEF		0x0001	/* overrun error found */
 #define SC2STR_PEF		0x0002	/* parity error found */
 #define SC2STR_FEF		0x0004	/* framing error found */
@@ -146,10 +170,17 @@
 #define SC2STR_RXF		0x0040	/* receive status */
 #define SC2STR_TXF		0x0080	/* transmit status */
 
+#ifdef CONFIG_AM33_2
 #define	SC2TIM			__SYSREG(0xd400202d, u8)	/* status reg */
+#endif
 
+#ifdef CONFIG_AM33_2
 #define SC2RXIRQ		24	/* serial 2 Receive IRQ */
 #define SC2TXIRQ		25	/* serial 2 Transmit IRQ */
+#else  /* CONFIG_AM33_2 */
+#define SC2RXIRQ		68	/* serial 2 Receive IRQ */
+#define SC2TXIRQ		69	/* serial 2 Transmit IRQ */
+#endif /* CONFIG_AM33_2 */
 
 #define	SC2RXICR		GxICR(SC2RXIRQ)	/* serial 2 receive intr ctrl reg */
 #define	SC2TXICR		GxICR(SC2TXIRQ)	/* serial 2 transmit intr ctrl reg */
diff --git a/arch/mn10300/include/asm/serial.h b/arch/mn10300/include/asm/serial.h
index a29445cddd6..23a79929359 100644
--- a/arch/mn10300/include/asm/serial.h
+++ b/arch/mn10300/include/asm/serial.h
@@ -9,10 +9,8 @@
  * 2 of the Licence, or (at your option) any later version.
  */
 
-/*
- * The ASB2305 has an 18.432 MHz clock the UART
- */
-#define BASE_BAUD	(18432000 / 16)
+#ifndef _ASM_SERIAL_H
+#define _ASM_SERIAL_H
 
 /* Standard COM flags (except for COM4, because of the 8514 problem) */
 #ifdef CONFIG_SERIAL_DETECT_IRQ
@@ -34,3 +32,5 @@
 #endif
 
 #include <unit/serial.h>
+
+#endif /* _ASM_SERIAL_H */
diff --git a/arch/mn10300/include/asm/smp.h b/arch/mn10300/include/asm/smp.h
index 4eb8c61b7da..b8585b4e8cd 100644
--- a/arch/mn10300/include/asm/smp.h
+++ b/arch/mn10300/include/asm/smp.h
@@ -3,6 +3,16 @@
  * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
  * Written by David Howells (dhowells@redhat.com)
  *
+ * Modified by Matsushita Electric Industrial Co., Ltd.
+ * Modifications:
+ *  13-Nov-2006 MEI Define IPI-IRQ number and add inline/macro function
+ *                  for SMP support.
+ *  22-Jan-2007 MEI Add the define related to SMP_BOOT_IRQ.
+ *  23-Feb-2007 MEI Add the define related to SMP icahce invalidate.
+ *  23-Jun-2008 MEI Delete INTC_IPI.
+ *  22-Jul-2008 MEI Add smp_nmi_call_function and related defines.
+ *  04-Aug-2008 MEI Delete USE_DOIRQ_CACHE_IPI.
+ *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public Licence
  * as published by the Free Software Foundation; either version
@@ -11,8 +21,98 @@
 #ifndef _ASM_SMP_H
 #define _ASM_SMP_H
 
+#ifndef __ASSEMBLY__
+#include <linux/threads.h>
+#include <linux/cpumask.h>
+#endif
+
 #ifdef CONFIG_SMP
-#error SMP not yet supported for MN10300
+#include <proc/smp-regs.h>
+
+#define RESCHEDULE_IPI		63
+#define CALL_FUNC_SINGLE_IPI	192
+#define LOCAL_TIMER_IPI		193
+#define FLUSH_CACHE_IPI		194
+#define CALL_FUNCTION_NMI_IPI	195
+#define GDB_NMI_IPI		196
+
+#define SMP_BOOT_IRQ		195
+
+#define RESCHEDULE_GxICR_LV	GxICR_LEVEL_6
+#define CALL_FUNCTION_GxICR_LV	GxICR_LEVEL_4
+#define LOCAL_TIMER_GxICR_LV	GxICR_LEVEL_4
+#define FLUSH_CACHE_GxICR_LV	GxICR_LEVEL_0
+#define SMP_BOOT_GxICR_LV	GxICR_LEVEL_0
+
+#define TIME_OUT_COUNT_BOOT_IPI	100
+#define DELAY_TIME_BOOT_IPI	75000
+
+
+#ifndef __ASSEMBLY__
+
+/**
+ * raw_smp_processor_id - Determine the raw CPU ID of the CPU running it
+ *
+ * What we really want to do is to use the CPUID hardware CPU register to get
+ * this information, but accesses to that aren't cached, and run at system bus
+ * speed, not CPU speed.  A copy of this value is, however, stored in the
+ * thread_info struct, and that can be cached.
+ *
+ * An alternate way of dealing with this could be to use the EPSW.S bits to
+ * cache this information for systems with up to four CPUs.
+ */
+#if 0
+#define raw_smp_processor_id()	(CPUID)
+#else
+#define raw_smp_processor_id()	(current_thread_info()->cpu)
 #endif
 
+static inline int cpu_logical_map(int cpu)
+{
+	return cpu;
+}
+
+static inline int cpu_number_map(int cpu)
+{
+	return cpu;
+}
+
+
+extern cpumask_t cpu_boot_map;
+
+extern void smp_init_cpus(void);
+extern void smp_cache_interrupt(void);
+extern void send_IPI_allbutself(int irq);
+extern int smp_nmi_call_function(smp_call_func_t func, void *info, int wait);
+
+extern void arch_send_call_function_single_ipi(int cpu);
+extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
+
+#ifdef CONFIG_HOTPLUG_CPU
+extern int __cpu_disable(void);
+extern void __cpu_die(unsigned int cpu);
+#endif /* CONFIG_HOTPLUG_CPU */
+
+#ifdef CONFIG_PREEMPT /* FIXME */
+#define __frame					\
+	({					\
+		struct pt_regs *f;		\
+		preempt_disable();		\
+		f = ___frame[CPUID];		\
+		preempt_enable();		\
+		f;				\
+	})
+#else
+#define __frame ___frame[CPUID]
 #endif
+
+#endif /* __ASSEMBLY__ */
+#else /* CONFIG_SMP */
+#ifndef __ASSEMBLY__
+
+static inline void smp_init_cpus(void) {}
+
+#endif /* __ASSEMBLY__ */
+#endif /* CONFIG_SMP */
+
+#endif /* _ASM_SMP_H */
diff --git a/arch/mn10300/include/asm/spinlock.h b/arch/mn10300/include/asm/spinlock.h
index 4bf9c8b169e..93429154e89 100644
--- a/arch/mn10300/include/asm/spinlock.h
+++ b/arch/mn10300/include/asm/spinlock.h
@@ -11,6 +11,183 @@
 #ifndef _ASM_SPINLOCK_H
 #define _ASM_SPINLOCK_H
 
-#error SMP spinlocks not implemented for MN10300
+#include <asm/atomic.h>
+#include <asm/rwlock.h>
+#include <asm/page.h>
 
+/*
+ * Simple spin lock operations.  There are two variants, one clears IRQ's
+ * on the local processor, one does not.
+ *
+ * We make no fairness assumptions. They have a cost.
+ */
+
+#define arch_spin_is_locked(x)	(*(volatile signed char *)(&(x)->slock) != 0)
+#define arch_spin_unlock_wait(x) do { barrier(); } while (arch_spin_is_locked(x))
+
+static inline void arch_spin_unlock(arch_spinlock_t *lock)
+{
+	asm volatile(
+		"	bclr	1,(0,%0)	\n"
+		:
+		: "a"(&lock->slock)
+		: "memory", "cc");
+}
+
+static inline int arch_spin_trylock(arch_spinlock_t *lock)
+{
+	int ret;
+
+	asm volatile(
+		"	mov	1,%0		\n"
+		"	bset	%0,(%1)		\n"
+		"	bne	1f		\n"
+		"	clr	%0		\n"
+		"1:	xor	1,%0		\n"
+		: "=d"(ret)
+		: "a"(&lock->slock)
+		: "memory", "cc");
+
+	return ret;
+}
+
+static inline void arch_spin_lock(arch_spinlock_t *lock)
+{
+	asm volatile(
+		"1:	bset	1,(0,%0)	\n"
+		"	bne	1b		\n"
+		:
+		: "a"(&lock->slock)
+		: "memory", "cc");
+}
+
+static inline void arch_spin_lock_flags(arch_spinlock_t *lock,
+					 unsigned long flags)
+{
+	int temp;
+
+	asm volatile(
+		"1:	bset	1,(0,%2)	\n"
+		"	beq	3f		\n"
+		"	mov	%1,epsw		\n"
+		"2:	mov	(0,%2),%0	\n"
+		"	or	%0,%0		\n"
+		"	bne	2b		\n"
+		"	mov	%3,%0		\n"
+		"	mov	%0,epsw		\n"
+		"	nop			\n"
+		"	nop			\n"
+		"	bra	1b\n"
+		"3:				\n"
+		: "=&d" (temp)
+		: "d" (flags), "a"(&lock->slock), "i"(EPSW_IE | MN10300_CLI_LEVEL)
+		: "memory", "cc");
+}
+
+#ifdef __KERNEL__
+
+/*
+ * Read-write spinlocks, allowing multiple readers
+ * but only one writer.
+ *
+ * NOTE! it is quite common to have readers in interrupts
+ * but no interrupt writers. For those circumstances we
+ * can "mix" irq-safe locks - any writer needs to get a
+ * irq-safe write-lock, but readers can get non-irqsafe
+ * read-locks.
+ */
+
+/**
+ * read_can_lock - would read_trylock() succeed?
+ * @lock: the rwlock in question.
+ */
+#define arch_read_can_lock(x) ((int)(x)->lock > 0)
+
+/**
+ * write_can_lock - would write_trylock() succeed?
+ * @lock: the rwlock in question.
+ */
+#define arch_write_can_lock(x) ((x)->lock == RW_LOCK_BIAS)
+
+/*
+ * On mn10300, we implement read-write locks as a 32-bit counter
+ * with the high bit (sign) being the "contended" bit.
+ */
+static inline void arch_read_lock(arch_rwlock_t *rw)
+{
+#if 0 //def CONFIG_MN10300_HAS_ATOMIC_OPS_UNIT
+	__build_read_lock(rw, "__read_lock_failed");
+#else
+	{
+		atomic_t *count = (atomic_t *)rw;
+		while (atomic_dec_return(count) < 0)
+			atomic_inc(count);
+	}
+#endif
+}
+
+static inline void arch_write_lock(arch_rwlock_t *rw)
+{
+#if 0 //def CONFIG_MN10300_HAS_ATOMIC_OPS_UNIT
+	__build_write_lock(rw, "__write_lock_failed");
+#else
+	{
+		atomic_t *count = (atomic_t *)rw;
+		while (!atomic_sub_and_test(RW_LOCK_BIAS, count))
+			atomic_add(RW_LOCK_BIAS, count);
+	}
+#endif
+}
+
+static inline void arch_read_unlock(arch_rwlock_t *rw)
+{
+#if 0 //def CONFIG_MN10300_HAS_ATOMIC_OPS_UNIT
+	__build_read_unlock(rw);
+#else
+	{
+		atomic_t *count = (atomic_t *)rw;
+		atomic_inc(count);
+	}
+#endif
+}
+
+static inline void arch_write_unlock(arch_rwlock_t *rw)
+{
+#if 0 //def CONFIG_MN10300_HAS_ATOMIC_OPS_UNIT
+	__build_write_unlock(rw);
+#else
+	{
+		atomic_t *count = (atomic_t *)rw;
+		atomic_add(RW_LOCK_BIAS, count);
+	}
+#endif
+}
+
+static inline int arch_read_trylock(arch_rwlock_t *lock)
+{
+	atomic_t *count = (atomic_t *)lock;
+	atomic_dec(count);
+	if (atomic_read(count) >= 0)
+		return 1;
+	atomic_inc(count);
+	return 0;
+}
+
+static inline int arch_write_trylock(arch_rwlock_t *lock)
+{
+	atomic_t *count = (atomic_t *)lock;
+	if (atomic_sub_and_test(RW_LOCK_BIAS, count))
+		return 1;
+	atomic_add(RW_LOCK_BIAS, count);
+	return 0;
+}
+
+#define arch_read_lock_flags(lock, flags)  arch_read_lock(lock)
+#define arch_write_lock_flags(lock, flags) arch_write_lock(lock)
+
+#define _raw_spin_relax(lock)	cpu_relax()
+#define _raw_read_relax(lock)	cpu_relax()
+#define _raw_write_relax(lock)	cpu_relax()
+
+#endif /* __KERNEL__ */
 #endif /* _ASM_SPINLOCK_H */
diff --git a/arch/mn10300/include/asm/spinlock_types.h b/arch/mn10300/include/asm/spinlock_types.h
new file mode 100644
index 00000000000..653dc519b40
--- /dev/null
+++ b/arch/mn10300/include/asm/spinlock_types.h
@@ -0,0 +1,20 @@
+#ifndef _ASM_SPINLOCK_TYPES_H
+#define _ASM_SPINLOCK_TYPES_H
+
+#ifndef __LINUX_SPINLOCK_TYPES_H
+# error "please don't include this file directly"
+#endif
+
+typedef struct arch_spinlock {
+	unsigned int slock;
+} arch_spinlock_t;
+
+#define __ARCH_SPIN_LOCK_UNLOCKED	{ 0 }
+
+typedef struct {
+	unsigned int lock;
+} arch_rwlock_t;
+
+#define __ARCH_RW_LOCK_UNLOCKED		{ RW_LOCK_BIAS }
+
+#endif /* _ASM_SPINLOCK_TYPES_H */
diff --git a/arch/mn10300/include/asm/system.h b/arch/mn10300/include/asm/system.h
index 7de90bc4cf8..8ff3e5aaca4 100644
--- a/arch/mn10300/include/asm/system.h
+++ b/arch/mn10300/include/asm/system.h
@@ -12,6 +12,7 @@
 #define _ASM_SYSTEM_H
 
 #include <asm/cpu-regs.h>
+#include <asm/intctl-regs.h>
 
 #ifdef __KERNEL__
 #ifndef __ASSEMBLY__
@@ -57,8 +58,6 @@ do {									\
 
 #define nop() asm volatile ("nop")
 
-#endif /* !__ASSEMBLY__ */
-
 /*
  * Force strict CPU ordering.
  * And yes, this is required on UP too when we're talking
@@ -85,17 +84,19 @@ do {									\
 #define smp_mb()	mb()
 #define smp_rmb()	rmb()
 #define smp_wmb()	wmb()
-#else
+#define set_mb(var, value)  do { xchg(&var, value); } while (0)
+#else  /* CONFIG_SMP */
 #define smp_mb()	barrier()
 #define smp_rmb()	barrier()
 #define smp_wmb()	barrier()
-#endif
-
 #define set_mb(var, value)  do { var = value;  mb(); } while (0)
+#endif /* CONFIG_SMP */
+
 #define set_wmb(var, value) do { var = value; wmb(); } while (0)
 
 #define read_barrier_depends()		do {} while (0)
 #define smp_read_barrier_depends()	do {} while (0)
 
+#endif /* !__ASSEMBLY__ */
 #endif /* __KERNEL__ */
 #endif /* _ASM_SYSTEM_H */
diff --git a/arch/mn10300/include/asm/timer-regs.h b/arch/mn10300/include/asm/timer-regs.h
index 1d883b7f94a..c634977caf6 100644
--- a/arch/mn10300/include/asm/timer-regs.h
+++ b/arch/mn10300/include/asm/timer-regs.h
@@ -17,21 +17,27 @@
 
 #ifdef __KERNEL__
 
-/* timer prescalar control */
+/*
+ * Timer prescalar control
+ */
 #define	TMPSCNT			__SYSREG(0xd4003071, u8) /* timer prescaler control */
 #define	TMPSCNT_ENABLE		0x80	/* timer prescaler enable */
 #define	TMPSCNT_DISABLE		0x00	/* timer prescaler disable */
 
-/* 8 bit timers */
+/*
+ * 8-bit timers
+ */
 #define	TM0MD			__SYSREG(0xd4003000, u8) /* timer 0 mode register */
 #define	TM0MD_SRC		0x07	/* timer source */
 #define	TM0MD_SRC_IOCLK		0x00	/* - IOCLK */
 #define	TM0MD_SRC_IOCLK_8	0x01	/* - 1/8 IOCLK */
 #define	TM0MD_SRC_IOCLK_32	0x02	/* - 1/32 IOCLK */
-#define	TM0MD_SRC_TM2IO		0x03	/* - TM2IO pin input */
 #define	TM0MD_SRC_TM1UFLOW	0x05	/* - timer 1 underflow */
 #define	TM0MD_SRC_TM2UFLOW	0x06	/* - timer 2 underflow */
+#if	defined(CONFIG_AM33_2)
+#define	TM0MD_SRC_TM2IO		0x03	/* - TM2IO pin input */
 #define	TM0MD_SRC_TM0IO		0x07	/* - TM0IO pin input */
+#endif /* CONFIG_AM33_2 */
 #define	TM0MD_INIT_COUNTER	0x40	/* initialize TMnBC = TMnBR */
 #define	TM0MD_COUNT_ENABLE	0x80	/* timer count enable */
 
@@ -43,7 +49,9 @@
 #define	TM1MD_SRC_TM0CASCADE	0x03	/* - cascade with timer 0 */
 #define	TM1MD_SRC_TM0UFLOW	0x04	/* - timer 0 underflow */
 #define	TM1MD_SRC_TM2UFLOW	0x06	/* - timer 2 underflow */
+#if defined(CONFIG_AM33_2)
 #define	TM1MD_SRC_TM1IO		0x07	/* - TM1IO pin input */
+#endif	/* CONFIG_AM33_2 */
 #define	TM1MD_INIT_COUNTER	0x40	/* initialize TMnBC = TMnBR */
 #define	TM1MD_COUNT_ENABLE	0x80	/* timer count enable */
 
@@ -55,7 +63,9 @@
 #define	TM2MD_SRC_TM1CASCADE	0x03	/* - cascade with timer 1 */
 #define	TM2MD_SRC_TM0UFLOW	0x04	/* - timer 0 underflow */
 #define	TM2MD_SRC_TM1UFLOW	0x05	/* - timer 1 underflow */
+#if defined(CONFIG_AM33_2)
 #define	TM2MD_SRC_TM2IO		0x07	/* - TM2IO pin input */
+#endif	/* CONFIG_AM33_2 */
 #define	TM2MD_INIT_COUNTER	0x40	/* initialize TMnBC = TMnBR */
 #define	TM2MD_COUNT_ENABLE	0x80	/* timer count enable */
 
@@ -64,11 +74,13 @@
 #define	TM3MD_SRC_IOCLK		0x00	/* - IOCLK */
 #define	TM3MD_SRC_IOCLK_8	0x01	/* - 1/8 IOCLK */
 #define	TM3MD_SRC_IOCLK_32	0x02	/* - 1/32 IOCLK */
-#define	TM3MD_SRC_TM1CASCADE	0x03	/* - cascade with timer 2 */
+#define	TM3MD_SRC_TM2CASCADE	0x03	/* - cascade with timer 2 */
 #define	TM3MD_SRC_TM0UFLOW	0x04	/* - timer 0 underflow */
 #define	TM3MD_SRC_TM1UFLOW	0x05	/* - timer 1 underflow */
 #define	TM3MD_SRC_TM2UFLOW	0x06	/* - timer 2 underflow */
+#if defined(CONFIG_AM33_2)
 #define	TM3MD_SRC_TM3IO		0x07	/* - TM3IO pin input */
+#endif	/* CONFIG_AM33_2 */
 #define	TM3MD_INIT_COUNTER	0x40	/* initialize TMnBC = TMnBR */
 #define	TM3MD_COUNT_ENABLE	0x80	/* timer count enable */
 
@@ -96,7 +108,9 @@
 #define	TM2ICR			GxICR(TM2IRQ)	/* timer 2 uflow intr ctrl reg */
 #define	TM3ICR			GxICR(TM3IRQ)	/* timer 3 uflow intr ctrl reg */
 
-/* 16-bit timers 4,5 & 7-11 */
+/*
+ * 16-bit timers 4,5 & 7-15
+ */
 #define	TM4MD			__SYSREG(0xd4003080, u8)   /* timer 4 mode register */
 #define	TM4MD_SRC		0x07	/* timer source */
 #define	TM4MD_SRC_IOCLK		0x00	/* - IOCLK */
@@ -105,7 +119,9 @@
 #define	TM4MD_SRC_TM0UFLOW	0x04	/* - timer 0 underflow */
 #define	TM4MD_SRC_TM1UFLOW	0x05	/* - timer 1 underflow */
 #define	TM4MD_SRC_TM2UFLOW	0x06	/* - timer 2 underflow */
+#if defined(CONFIG_AM33_2)
 #define	TM4MD_SRC_TM4IO		0x07	/* - TM4IO pin input */
+#endif	/* CONFIG_AM33_2 */
 #define	TM4MD_INIT_COUNTER	0x40	/* initialize TMnBC = TMnBR */
 #define	TM4MD_COUNT_ENABLE	0x80	/* timer count enable */
 
@@ -118,7 +134,11 @@
 #define	TM5MD_SRC_TM0UFLOW	0x04	/* - timer 0 underflow */
 #define	TM5MD_SRC_TM1UFLOW	0x05	/* - timer 1 underflow */
 #define	TM5MD_SRC_TM2UFLOW	0x06	/* - timer 2 underflow */
+#if defined(CONFIG_AM33_2)
 #define	TM5MD_SRC_TM5IO		0x07	/* - TM5IO pin input */
+#else	/* !CONFIG_AM33_2 */
+#define	TM5MD_SRC_TM7UFLOW	0x07	/* - timer 7 underflow */
+#endif	/* CONFIG_AM33_2 */
 #define	TM5MD_INIT_COUNTER	0x40	/* initialize TMnBC = TMnBR */
 #define	TM5MD_COUNT_ENABLE	0x80	/* timer count enable */
 
@@ -130,7 +150,9 @@
 #define	TM7MD_SRC_TM0UFLOW	0x04	/* - timer 0 underflow */
 #define	TM7MD_SRC_TM1UFLOW	0x05	/* - timer 1 underflow */
 #define	TM7MD_SRC_TM2UFLOW	0x06	/* - timer 2 underflow */
+#if defined(CONFIG_AM33_2)
 #define	TM7MD_SRC_TM7IO		0x07	/* - TM7IO pin input */
+#endif	/* CONFIG_AM33_2 */
 #define	TM7MD_INIT_COUNTER	0x40	/* initialize TMnBC = TMnBR */
 #define	TM7MD_COUNT_ENABLE	0x80	/* timer count enable */
 
@@ -143,7 +165,11 @@
 #define	TM8MD_SRC_TM0UFLOW	0x04	/* - timer 0 underflow */
 #define	TM8MD_SRC_TM1UFLOW	0x05	/* - timer 1 underflow */
 #define	TM8MD_SRC_TM2UFLOW	0x06	/* - timer 2 underflow */
+#if defined(CONFIG_AM33_2)
 #define	TM8MD_SRC_TM8IO		0x07	/* - TM8IO pin input */
+#else	/* !CONFIG_AM33_2 */
+#define	TM8MD_SRC_TM7UFLOW	0x07	/* - timer 7 underflow */
+#endif	/* CONFIG_AM33_2 */
 #define	TM8MD_INIT_COUNTER	0x40	/* initialize TMnBC = TMnBR */
 #define	TM8MD_COUNT_ENABLE	0x80	/* timer count enable */
 
@@ -156,7 +182,11 @@
 #define	TM9MD_SRC_TM0UFLOW	0x04	/* - timer 0 underflow */
 #define	TM9MD_SRC_TM1UFLOW	0x05	/* - timer 1 underflow */
 #define	TM9MD_SRC_TM2UFLOW	0x06	/* - timer 2 underflow */
+#if defined(CONFIG_AM33_2)
 #define	TM9MD_SRC_TM9IO		0x07	/* - TM9IO pin input */
+#else	/* !CONFIG_AM33_2 */
+#define	TM9MD_SRC_TM7UFLOW	0x07	/* - timer 7 underflow */
+#endif	/* CONFIG_AM33_2 */
 #define	TM9MD_INIT_COUNTER	0x40	/* initialize TMnBC = TMnBR */
 #define	TM9MD_COUNT_ENABLE	0x80	/* timer count enable */
 
@@ -169,7 +199,11 @@
 #define	TM10MD_SRC_TM0UFLOW	0x04	/* - timer 0 underflow */
 #define	TM10MD_SRC_TM1UFLOW	0x05	/* - timer 1 underflow */
 #define	TM10MD_SRC_TM2UFLOW	0x06	/* - timer 2 underflow */
+#if defined(CONFIG_AM33_2)
 #define	TM10MD_SRC_TM10IO	0x07	/* - TM10IO pin input */
+#else	/* !CONFIG_AM33_2 */
+#define	TM10MD_SRC_TM7UFLOW	0x07	/* - timer 7 underflow */
+#endif	/* CONFIG_AM33_2 */
 #define	TM10MD_INIT_COUNTER	0x40	/* initialize TMnBC = TMnBR */
 #define	TM10MD_COUNT_ENABLE	0x80	/* timer count enable */
 
@@ -178,32 +212,101 @@
 #define	TM11MD_SRC_IOCLK	0x00	/* - IOCLK */
 #define	TM11MD_SRC_IOCLK_8	0x01	/* - 1/8 IOCLK */
 #define	TM11MD_SRC_IOCLK_32	0x02	/* - 1/32 IOCLK */
-#define	TM11MD_SRC_TM7CASCADE	0x03	/* - cascade with timer 7 */
 #define	TM11MD_SRC_TM0UFLOW	0x04	/* - timer 0 underflow */
 #define	TM11MD_SRC_TM1UFLOW	0x05	/* - timer 1 underflow */
 #define	TM11MD_SRC_TM2UFLOW	0x06	/* - timer 2 underflow */
+#if defined(CONFIG_AM33_2)
 #define	TM11MD_SRC_TM11IO	0x07	/* - TM11IO pin input */
+#else	/* !CONFIG_AM33_2 */
+#define	TM11MD_SRC_TM7UFLOW	0x07	/* - timer 7 underflow */
+#endif	/* CONFIG_AM33_2 */
 #define	TM11MD_INIT_COUNTER	0x40	/* initialize TMnBC = TMnBR */
 #define	TM11MD_COUNT_ENABLE	0x80	/* timer count enable */
 
+#if defined(CONFIG_AM34_2)
+#define	TM12MD			__SYSREG(0xd4003180, u8)   /* timer 11 mode register */
+#define	TM12MD_SRC		0x07	/* timer source */
+#define	TM12MD_SRC_IOCLK	0x00	/* - IOCLK */
+#define	TM12MD_SRC_IOCLK_8	0x01	/* - 1/8 IOCLK */
+#define	TM12MD_SRC_IOCLK_32	0x02	/* - 1/32 IOCLK */
+#define	TM12MD_SRC_TM0UFLOW	0x04	/* - timer 0 underflow */
+#define	TM12MD_SRC_TM1UFLOW	0x05	/* - timer 1 underflow */
+#define	TM12MD_SRC_TM2UFLOW	0x06	/* - timer 2 underflow */
+#define	TM12MD_SRC_TM7UFLOW	0x07	/* - timer 7 underflow */
+#define	TM12MD_INIT_COUNTER	0x40	/* initialize TMnBC = TMnBR */
+#define	TM12MD_COUNT_ENABLE	0x80	/* timer count enable */
+
+#define	TM13MD			__SYSREG(0xd4003182, u8)   /* timer 11 mode register */
+#define	TM13MD_SRC		0x07	/* timer source */
+#define	TM13MD_SRC_IOCLK	0x00	/* - IOCLK */
+#define	TM13MD_SRC_IOCLK_8	0x01	/* - 1/8 IOCLK */
+#define	TM13MD_SRC_IOCLK_32	0x02	/* - 1/32 IOCLK */
+#define	TM13MD_SRC_TM12CASCADE	0x03	/* - cascade with timer 12 */
+#define	TM13MD_SRC_TM0UFLOW	0x04	/* - timer 0 underflow */
+#define	TM13MD_SRC_TM1UFLOW	0x05	/* - timer 1 underflow */
+#define	TM13MD_SRC_TM2UFLOW	0x06	/* - timer 2 underflow */
+#define	TM13MD_SRC_TM7UFLOW	0x07	/* - timer 7 underflow */
+#define	TM13MD_INIT_COUNTER	0x40	/* initialize TMnBC = TMnBR */
+#define	TM13MD_COUNT_ENABLE	0x80	/* timer count enable */
+
+#define	TM14MD			__SYSREG(0xd4003184, u8)   /* timer 11 mode register */
+#define	TM14MD_SRC		0x07	/* timer source */
+#define	TM14MD_SRC_IOCLK	0x00	/* - IOCLK */
+#define	TM14MD_SRC_IOCLK_8	0x01	/* - 1/8 IOCLK */
+#define	TM14MD_SRC_IOCLK_32	0x02	/* - 1/32 IOCLK */
+#define	TM14MD_SRC_TM13CASCADE	0x03	/* - cascade with timer 13 */
+#define	TM14MD_SRC_TM0UFLOW	0x04	/* - timer 0 underflow */
+#define	TM14MD_SRC_TM1UFLOW	0x05	/* - timer 1 underflow */
+#define	TM14MD_SRC_TM2UFLOW	0x06	/* - timer 2 underflow */
+#define	TM14MD_SRC_TM7UFLOW	0x07	/* - timer 7 underflow */
+#define	TM14MD_INIT_COUNTER	0x40	/* initialize TMnBC = TMnBR */
+#define	TM14MD_COUNT_ENABLE	0x80	/* timer count enable */
+
+#define	TM15MD			__SYSREG(0xd4003186, u8)   /* timer 11 mode register */
+#define	TM15MD_SRC		0x07	/* timer source */
+#define	TM15MD_SRC_IOCLK	0x00	/* - IOCLK */
+#define	TM15MD_SRC_IOCLK_8	0x01	/* - 1/8 IOCLK */
+#define	TM15MD_SRC_IOCLK_32	0x02	/* - 1/32 IOCLK */
+#define	TM15MD_SRC_TM0UFLOW	0x04	/* - timer 0 underflow */
+#define	TM15MD_SRC_TM1UFLOW	0x05	/* - timer 1 underflow */
+#define	TM15MD_SRC_TM2UFLOW	0x06	/* - timer 2 underflow */
+#define	TM15MD_SRC_TM7UFLOW	0x07	/* - timer 7 underflow */
+#define	TM15MD_INIT_COUNTER	0x40	/* initialize TMnBC = TMnBR */
+#define	TM15MD_COUNT_ENABLE	0x80	/* timer count enable */
+#endif	/* CONFIG_AM34_2 */
+
+
 #define	TM4BR			__SYSREG(0xd4003090, u16)  /* timer 4 base register */
 #define	TM5BR			__SYSREG(0xd4003092, u16)  /* timer 5 base register */
+#define	TM45BR			__SYSREG(0xd4003090, u32)  /* timer 4:5 base register */
 #define	TM7BR			__SYSREG(0xd4003096, u16)  /* timer 7 base register */
 #define	TM8BR			__SYSREG(0xd4003098, u16)  /* timer 8 base register */
 #define	TM9BR			__SYSREG(0xd400309a, u16)  /* timer 9 base register */
+#define	TM89BR			__SYSREG(0xd4003098, u32)  /* timer 8:9 base register */
 #define	TM10BR			__SYSREG(0xd400309c, u16)  /* timer 10 base register */
 #define	TM11BR			__SYSREG(0xd400309e, u16)  /* timer 11 base register */
-#define	TM45BR			__SYSREG(0xd4003090, u32)  /* timer 4:5 base register */
+#if defined(CONFIG_AM34_2)
+#define	TM12BR			__SYSREG(0xd4003190, u16)  /* timer 12 base register */
+#define	TM13BR			__SYSREG(0xd4003192, u16)  /* timer 13 base register */
+#define	TM14BR			__SYSREG(0xd4003194, u16)  /* timer 14 base register */
+#define	TM15BR			__SYSREG(0xd4003196, u16)  /* timer 15 base register */
+#endif	/* CONFIG_AM34_2 */
 
 #define	TM4BC			__SYSREG(0xd40030a0, u16)  /* timer 4 binary counter */
 #define	TM5BC			__SYSREG(0xd40030a2, u16)  /* timer 5 binary counter */
 #define	TM45BC			__SYSREG(0xd40030a0, u32)  /* timer 4:5 binary counter */
-
 #define	TM7BC			__SYSREG(0xd40030a6, u16)  /* timer 7 binary counter */
 #define	TM8BC			__SYSREG(0xd40030a8, u16)  /* timer 8 binary counter */
 #define	TM9BC			__SYSREG(0xd40030aa, u16)  /* timer 9 binary counter */
+#define	TM89BC			__SYSREG(0xd40030a8, u32)  /* timer 8:9 binary counter */
 #define	TM10BC			__SYSREG(0xd40030ac, u16)  /* timer 10 binary counter */
 #define	TM11BC			__SYSREG(0xd40030ae, u16)  /* timer 11 binary counter */
+#if defined(CONFIG_AM34_2)
+#define	TM12BC			__SYSREG(0xd40031a0, u16)  /* timer 12 binary counter */
+#define	TM13BC			__SYSREG(0xd40031a2, u16)  /* timer 13 binary counter */
+#define	TM14BC			__SYSREG(0xd40031a4, u16)  /* timer 14 binary counter */
+#define	TM15BC			__SYSREG(0xd40031a6, u16)  /* timer 15 binary counter */
+#endif	/* CONFIG_AM34_2 */
 
 #define TM4IRQ			6	/* timer 4 IRQ */
 #define TM5IRQ			7	/* timer 5 IRQ */
@@ -212,6 +315,12 @@
 #define TM9IRQ			13	/* timer 9 IRQ */
 #define TM10IRQ			14	/* timer 10 IRQ */
 #define TM11IRQ			15	/* timer 11 IRQ */
+#if defined(CONFIG_AM34_2)
+#define TM12IRQ			64	/* timer 12 IRQ */
+#define TM13IRQ			65	/* timer 13 IRQ */
+#define TM14IRQ			66	/* timer 14 IRQ */
+#define TM15IRQ			67	/* timer 15 IRQ */
+#endif	/* CONFIG_AM34_2 */
 
 #define	TM4ICR			GxICR(TM4IRQ)	/* timer 4 uflow intr ctrl reg */
 #define	TM5ICR			GxICR(TM5IRQ)	/* timer 5 uflow intr ctrl reg */
@@ -220,8 +329,16 @@
 #define	TM9ICR			GxICR(TM9IRQ)	/* timer 9 uflow intr ctrl reg */
 #define	TM10ICR			GxICR(TM10IRQ)	/* timer 10 uflow intr ctrl reg */
 #define	TM11ICR			GxICR(TM11IRQ)	/* timer 11 uflow intr ctrl reg */
-
-/* 16-bit timer 6 */
+#if defined(CONFIG_AM34_2)
+#define	TM12ICR			GxICR(TM12IRQ)	/* timer 12 uflow intr ctrl reg */
+#define	TM13ICR			GxICR(TM13IRQ)	/* timer 13 uflow intr ctrl reg */
+#define	TM14ICR			GxICR(TM14IRQ)	/* timer 14 uflow intr ctrl reg */
+#define	TM15ICR			GxICR(TM15IRQ)	/* timer 15 uflow intr ctrl reg */
+#endif	/* CONFIG_AM34_2 */
+
+/*
+ * 16-bit timer 6
+ */
 #define	TM6MD			__SYSREG(0xd4003084, u16)  /* timer6 mode register */
 #define	TM6MD_SRC		0x0007	/* timer source */
 #define	TM6MD_SRC_IOCLK		0x0000	/* - IOCLK */
@@ -229,10 +346,14 @@
 #define	TM6MD_SRC_IOCLK_32	0x0002	/* - 1/32 IOCLK */
 #define	TM6MD_SRC_TM0UFLOW	0x0004	/* - timer 0 underflow */
 #define	TM6MD_SRC_TM1UFLOW	0x0005	/* - timer 1 underflow */
-#define	TM6MD_SRC_TM6IOB_BOTH	0x0006	/* - TM6IOB pin input (both edges) */
+#define	TM6MD_SRC_TM2UFLOW	0x0006	/* - timer 2 underflow */
+#if defined(CONFIG_AM33_2)
+/* #define	TM6MD_SRC_TM6IOB_BOTH	0x0006 */	/* - TM6IOB pin input (both edges) */
 #define	TM6MD_SRC_TM6IOB_SINGLE	0x0007	/* - TM6IOB pin input (single edge) */
-#define	TM6MD_CLR_ENABLE	0x0010	/* clear count enable */
+#endif	/* CONFIG_AM33_2 */
 #define	TM6MD_ONESHOT_ENABLE	0x0040	/* oneshot count */
+#define	TM6MD_CLR_ENABLE	0x0010	/* clear count enable */
+#if	defined(CONFIG_AM33_2)
 #define	TM6MD_TRIG_ENABLE	0x0080	/* TM6IOB pin trigger enable */
 #define TM6MD_PWM		0x3800	/* PWM output mode */
 #define TM6MD_PWM_DIS		0x0000	/* - disabled */
@@ -240,10 +361,15 @@
 #define	TM6MD_PWM_11BIT		0x1800	/* - 11 bits mode */
 #define	TM6MD_PWM_12BIT		0x3000	/* - 12 bits mode */
 #define	TM6MD_PWM_14BIT		0x3800	/* - 14 bits mode */
+#endif	/* CONFIG_AM33_2 */
+
 #define	TM6MD_INIT_COUNTER	0x4000	/* initialize TMnBC to zero */
 #define	TM6MD_COUNT_ENABLE	0x8000	/* timer count enable */
 
 #define	TM6MDA			__SYSREG(0xd40030b4, u8)   /* timer6 cmp/cap A mode reg */
+#define	TM6MDA_MODE_CMP_SINGLE	0x00	/* - compare, single buffer mode */
+#define	TM6MDA_MODE_CMP_DOUBLE	0x40	/* - compare, double buffer mode */
+#if	defined(CONFIG_AM33_2)
 #define TM6MDA_OUT		0x07	/* output select */
 #define	TM6MDA_OUT_SETA_RESETB	0x00	/* - set at match A, reset at match B */
 #define	TM6MDA_OUT_SETA_RESETOV	0x01	/* - set at match A, reset at overflow */
@@ -251,30 +377,35 @@
 #define	TM6MDA_OUT_RESETA	0x03	/* - reset at match A */
 #define	TM6MDA_OUT_TOGGLE	0x04	/* - toggle on match A */
 #define TM6MDA_MODE		0xc0	/* compare A register mode */
-#define	TM6MDA_MODE_CMP_SINGLE	0x00	/* - compare, single buffer mode */
-#define	TM6MDA_MODE_CMP_DOUBLE	0x40	/* - compare, double buffer mode */
 #define	TM6MDA_MODE_CAP_S_EDGE	0x80	/* - capture, single edge mode */
 #define	TM6MDA_MODE_CAP_D_EDGE	0xc0	/* - capture, double edge mode */
 #define TM6MDA_EDGE		0x20	/* compare A edge select */
 #define	TM6MDA_EDGE_FALLING	0x00	/* capture on falling edge */
 #define	TM6MDA_EDGE_RISING	0x20	/* capture on rising edge */
 #define	TM6MDA_CAPTURE_ENABLE	0x10	/* capture enable */
+#else	/* !CONFIG_AM33_2 */
+#define	TM6MDA_MODE		0x40	/* compare A register mode */
+#endif	/* CONFIG_AM33_2 */
 
 #define	TM6MDB			__SYSREG(0xd40030b5, u8)   /* timer6 cmp/cap B mode reg */
+#define	TM6MDB_MODE_CMP_SINGLE	0x00	/* - compare, single buffer mode */
+#define	TM6MDB_MODE_CMP_DOUBLE	0x40	/* - compare, double buffer mode */
+#if defined(CONFIG_AM33_2)
 #define TM6MDB_OUT		0x07	/* output select */
 #define	TM6MDB_OUT_SETB_RESETA	0x00	/* - set at match B, reset at match A */
 #define	TM6MDB_OUT_SETB_RESETOV	0x01	/* - set at match B */
 #define	TM6MDB_OUT_RESETB	0x03	/* - reset at match B */
 #define	TM6MDB_OUT_TOGGLE	0x04	/* - toggle on match B */
 #define TM6MDB_MODE		0xc0	/* compare B register mode */
-#define	TM6MDB_MODE_CMP_SINGLE	0x00	/* - compare, single buffer mode */
-#define	TM6MDB_MODE_CMP_DOUBLE	0x40	/* - compare, double buffer mode */
 #define	TM6MDB_MODE_CAP_S_EDGE	0x80	/* - capture, single edge mode */
 #define	TM6MDB_MODE_CAP_D_EDGE	0xc0	/* - capture, double edge mode */
 #define TM6MDB_EDGE		0x20	/* compare B edge select */
 #define	TM6MDB_EDGE_FALLING	0x00	/* capture on falling edge */
 #define	TM6MDB_EDGE_RISING	0x20	/* capture on rising edge */
 #define	TM6MDB_CAPTURE_ENABLE	0x10	/* capture enable */
+#else	/* !CONFIG_AM33_2 */
+#define	TM6MDB_MODE		0x40	/* compare B register mode */
+#endif	/* CONFIG_AM33_2 */
 
 #define	TM6CA			__SYSREG(0xd40030c4, u16)   /* timer6 cmp/capture reg A */
 #define	TM6CB			__SYSREG(0xd40030d4, u16)   /* timer6 cmp/capture reg B */
@@ -288,6 +419,34 @@
 #define	TM6AICR			GxICR(TM6AIRQ)	/* timer 6A intr control reg */
 #define	TM6BICR			GxICR(TM6BIRQ)	/* timer 6B intr control reg */
 
+#if defined(CONFIG_AM34_2)
+/*
+ * MTM: OS Tick-Timer
+ */
+#define	TMTMD			__SYSREG(0xd4004100, u8)	/* Tick Timer mode register */
+#define	TMTMD_TMTLDE		0x40	/* initialize TMTBC = TMTBR */
+#define	TMTMD_TMTCNE		0x80	/* timer count enable       */
+
+#define	TMTBR			__SYSREG(0xd4004110, u32)	/* Tick Timer mode reg */
+#define	TMTBC			__SYSREG(0xd4004120, u32)	/* Tick Timer mode reg */
+
+/*
+ * MTM: OS Timestamp-Timer
+ */
+#define	TMSMD			__SYSREG(0xd4004140, u8)	/* Tick Timer mode register */
+#define	TMSMD_TMSLDE		0x40		/* initialize TMSBC = TMSBR */
+#define	TMSMD_TMSCNE		0x80		/* timer count enable       */
+
+#define	TMSBR			__SYSREG(0xd4004150, u32)	/* Tick Timer mode register */
+#define	TMSBC			__SYSREG(0xd4004160, u32)	/* Tick Timer mode register */
+
+#define TMTIRQ			119		/* OS Tick timer   IRQ */
+#define TMSIRQ			120		/* Timestamp timer IRQ */
+
+#define	TMTICR			GxICR(TMTIRQ)	/* OS Tick timer   uflow intr ctrl reg */
+#define	TMSICR			GxICR(TMSIRQ)	/* Timestamp timer uflow intr ctrl reg */
+#endif	/* CONFIG_AM34_2 */
+
 #endif /* __KERNEL__ */
 
 #endif /* _ASM_TIMER_REGS_H */
diff --git a/arch/mn10300/include/asm/timex.h b/arch/mn10300/include/asm/timex.h
index 8d031f9e117..ce5719a2ce7 100644
--- a/arch/mn10300/include/asm/timex.h
+++ b/arch/mn10300/include/asm/timex.h
@@ -16,8 +16,7 @@
 
 #define TICK_SIZE (tick_nsec / 1000)
 
-#define CLOCK_TICK_RATE 1193180 /* Underlying HZ - this should probably be set
-				 * to something appropriate, but what? */
+#define CLOCK_TICK_RATE MN10300_JCCLK /* Underlying HZ */
 
 extern cycles_t cacheflush_time;
 
diff --git a/arch/mn10300/include/asm/uaccess.h b/arch/mn10300/include/asm/uaccess.h
index 197a7af3dd8..47e7951e689 100644
--- a/arch/mn10300/include/asm/uaccess.h
+++ b/arch/mn10300/include/asm/uaccess.h
@@ -377,7 +377,7 @@ unsigned long __generic_copy_to_user_nocheck(void *to, const void *from,
 
 
 #if 0
-#error don't use - these macros don't increment to & from pointers
+#error "don't use - these macros don't increment to & from pointers"
 /* Optimize just a little bit when we know the size of the move. */
 #define __constant_copy_user(to, from, size)	\
 do {						\