diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2010-10-27 18:53:26 -0700 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2010-10-27 18:53:26 -0700 |
| commit | bdab225015fbbb45ccd8913f5d7c01b2bf67d8b2 (patch) | |
| tree | 5ef62301face958977a084bf2b6c5300296a25f2 /arch/mn10300/include/asm | |
| parent | 7c5814c7199851c5fe9395d08fc1ab3c8c1531ea (diff) | |
| parent | 7c7fcf762e405eb040ee10d22d656a791f616122 (diff) | |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-2.6-mn10300
* git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-2.6-mn10300: (44 commits)
MN10300: Save frame pointer in thread_info struct rather than global var
MN10300: Change "Matsushita" to "Panasonic".
MN10300: Create a defconfig for the ASB2364 board
MN10300: Update the ASB2303 defconfig
MN10300: ASB2364: Add support for SMSC911X and SMC911X
MN10300: ASB2364: Handle the IRQ multiplexer in the FPGA
MN10300: Generic time support
MN10300: Specify an ELF HWCAP flag for MN10300 Atomic Operations Unit support
MN10300: Map userspace atomic op regs as a vmalloc page
MN10300: And Panasonic AM34 subarch and implement SMP
MN10300: Delete idle_timestamp from irq_cpustat_t
MN10300: Make various interrupt priority settings configurable
MN10300: Optimise do_csum()
MN10300: Implement atomic ops using atomic ops unit
MN10300: Make the FPU operate in non-lazy mode under SMP
MN10300: SMP TLB flushing
MN10300: Use the [ID]PTEL2 registers rather than [ID]PTEL for TLB control
MN10300: Make the use of PIDR to mark TLB entries controllable
MN10300: Rename __flush_tlb*() to local_flush_tlb*()
MN10300: AM34 erratum requires MMUCTR read and write on exception entry
...
Diffstat (limited to 'arch/mn10300/include/asm')
38 files changed, 1792 insertions, 524 deletions
diff --git a/arch/mn10300/include/asm/atomic.h b/arch/mn10300/include/asm/atomic.h index f0cc1f84a72..92d2f9298e3 100644 --- a/arch/mn10300/include/asm/atomic.h +++ b/arch/mn10300/include/asm/atomic.h @@ -1 +1,351 @@ +/* MN10300 Atomic counter operations + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_ATOMIC_H +#define _ASM_ATOMIC_H + +#include <asm/irqflags.h> + +#ifndef __ASSEMBLY__ + +#ifdef CONFIG_SMP +#ifdef CONFIG_MN10300_HAS_ATOMIC_OPS_UNIT +static inline +unsigned long __xchg(volatile unsigned long *m, unsigned long val) +{ + unsigned long status; + unsigned long oldval; + + asm volatile( + "1: mov %4,(_AAR,%3) \n" + " mov (_ADR,%3),%1 \n" + " mov %5,(_ADR,%3) \n" + " mov (_ADR,%3),%0 \n" /* flush */ + " mov (_ASR,%3),%0 \n" + " or %0,%0 \n" + " bne 1b \n" + : "=&r"(status), "=&r"(oldval), "=m"(*m) + : "a"(ATOMIC_OPS_BASE_ADDR), "r"(m), "r"(val) + : "memory", "cc"); + + return oldval; +} + +static inline unsigned long __cmpxchg(volatile unsigned long *m, + unsigned long old, unsigned long new) +{ + unsigned long status; + unsigned long oldval; + + asm volatile( + "1: mov %4,(_AAR,%3) \n" + " mov (_ADR,%3),%1 \n" + " cmp %5,%1 \n" + " bne 2f \n" + " mov %6,(_ADR,%3) \n" + "2: mov (_ADR,%3),%0 \n" /* flush */ + " mov (_ASR,%3),%0 \n" + " or %0,%0 \n" + " bne 1b \n" + : "=&r"(status), "=&r"(oldval), "=m"(*m) + : "a"(ATOMIC_OPS_BASE_ADDR), "r"(m), + "r"(old), "r"(new) + : "memory", "cc"); + + return oldval; +} +#else /* CONFIG_MN10300_HAS_ATOMIC_OPS_UNIT */ +#error "No SMP atomic operation support!" +#endif /* CONFIG_MN10300_HAS_ATOMIC_OPS_UNIT */ + +#else /* CONFIG_SMP */ + +/* + * Emulate xchg for non-SMP MN10300 + */ +struct __xchg_dummy { unsigned long a[100]; }; +#define __xg(x) ((struct __xchg_dummy *)(x)) + +static inline +unsigned long __xchg(volatile unsigned long *m, unsigned long val) +{ + unsigned long oldval; + unsigned long flags; + + flags = arch_local_cli_save(); + oldval = *m; + *m = val; + arch_local_irq_restore(flags); + return oldval; +} + +/* + * Emulate cmpxchg for non-SMP MN10300 + */ +static inline unsigned long __cmpxchg(volatile unsigned long *m, + unsigned long old, unsigned long new) +{ + unsigned long oldval; + unsigned long flags; + + flags = arch_local_cli_save(); + oldval = *m; + if (oldval == old) + *m = new; + arch_local_irq_restore(flags); + return oldval; +} + +#endif /* CONFIG_SMP */ + +#define xchg(ptr, v) \ + ((__typeof__(*(ptr))) __xchg((unsigned long *)(ptr), \ + (unsigned long)(v))) + +#define cmpxchg(ptr, o, n) \ + ((__typeof__(*(ptr))) __cmpxchg((unsigned long *)(ptr), \ + (unsigned long)(o), \ + (unsigned long)(n))) + +#define atomic_xchg(ptr, v) (xchg(&(ptr)->counter, (v))) +#define atomic_cmpxchg(v, old, new) (cmpxchg(&((v)->counter), (old), (new))) + +#endif /* !__ASSEMBLY__ */ + +#ifndef CONFIG_SMP #include <asm-generic/atomic.h> +#else + +/* + * Atomic operations that C can't guarantee us. Useful for + * resource counting etc.. + */ + +#define ATOMIC_INIT(i) { (i) } + +#ifdef __KERNEL__ + +/** + * atomic_read - read atomic variable + * @v: pointer of type atomic_t + * + * Atomically reads the value of @v. Note that the guaranteed + * useful range of an atomic_t is only 24 bits. + */ +#define atomic_read(v) ((v)->counter) + +/** + * atomic_set - set atomic variable + * @v: pointer of type atomic_t + * @i: required value + * + * Atomically sets the value of @v to @i. Note that the guaranteed + * useful range of an atomic_t is only 24 bits. + */ +#define atomic_set(v, i) (((v)->counter) = (i)) + +/** + * atomic_add_return - add integer to atomic variable + * @i: integer value to add + * @v: pointer of type atomic_t + * + * Atomically adds @i to @v and returns the result + * Note that the guaranteed useful range of an atomic_t is only 24 bits. + */ +static inline int atomic_add_return(int i, atomic_t *v) +{ + int retval; +#ifdef CONFIG_SMP + int status; + + asm volatile( + "1: mov %4,(_AAR,%3) \n" + " mov (_ADR,%3),%1 \n" + " add %5,%1 \n" + " mov %1,(_ADR,%3) \n" + " mov (_ADR,%3),%0 \n" /* flush */ + " mov (_ASR,%3),%0 \n" + " or %0,%0 \n" + " bne 1b \n" + : "=&r"(status), "=&r"(retval), "=m"(v->counter) + : "a"(ATOMIC_OPS_BASE_ADDR), "r"(&v->counter), "r"(i) + : "memory", "cc"); + +#else + unsigned long flags; + + flags = arch_local_cli_save(); + retval = v->counter; + retval += i; + v->counter = retval; + arch_local_irq_restore(flags); +#endif + return retval; +} + +/** + * atomic_sub_return - subtract integer from atomic variable + * @i: integer value to subtract + * @v: pointer of type atomic_t + * + * Atomically subtracts @i from @v and returns the result + * Note that the guaranteed useful range of an atomic_t is only 24 bits. + */ +static inline int atomic_sub_return(int i, atomic_t *v) +{ + int retval; +#ifdef CONFIG_SMP + int status; + + asm volatile( + "1: mov %4,(_AAR,%3) \n" + " mov (_ADR,%3),%1 \n" + " sub %5,%1 \n" + " mov %1,(_ADR,%3) \n" + " mov (_ADR,%3),%0 \n" /* flush */ + " mov (_ASR,%3),%0 \n" + " or %0,%0 \n" + " bne 1b \n" + : "=&r"(status), "=&r"(retval), "=m"(v->counter) + : "a"(ATOMIC_OPS_BASE_ADDR), "r"(&v->counter), "r"(i) + : "memory", "cc"); + +#else + unsigned long flags; + flags = arch_local_cli_save(); + retval = v->counter; + retval -= i; + v->counter = retval; + arch_local_irq_restore(flags); +#endif + return retval; +} + +static inline int atomic_add_negative(int i, atomic_t *v) +{ + return atomic_add_return(i, v) < 0; +} + +static inline void atomic_add(int i, atomic_t *v) +{ + atomic_add_return(i, v); +} + +static inline void atomic_sub(int i, atomic_t *v) +{ + atomic_sub_return(i, v); +} + +static inline void atomic_inc(atomic_t *v) +{ + atomic_add_return(1, v); +} + +static inline void atomic_dec(atomic_t *v) +{ + atomic_sub_return(1, v); +} + +#define atomic_dec_return(v) atomic_sub_return(1, (v)) +#define atomic_inc_return(v) atomic_add_return(1, (v)) + +#define atomic_sub_and_test(i, v) (atomic_sub_return((i), (v)) == 0) +#define atomic_dec_and_test(v) (atomic_sub_return(1, (v)) == 0) +#define atomic_inc_and_test(v) (atomic_add_return(1, (v)) == 0) + +#define atomic_add_unless(v, a, u) \ +({ \ + int c, old; \ + c = atomic_read(v); \ + while (c != (u) && (old = atomic_cmpxchg((v), c, c + (a))) != c) \ + c = old; \ + c != (u); \ +}) + +#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0) + +/** + * atomic_clear_mask - Atomically clear bits in memory + * @mask: Mask of the bits to be cleared + * @v: pointer to word in memory + * + * Atomically clears the bits set in mask from the memory word specified. + */ +static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr) +{ +#ifdef CONFIG_SMP + int status; + + asm volatile( + "1: mov %3,(_AAR,%2) \n" + " mov (_ADR,%2),%0 \n" + " and %4,%0 \n" + " mov %0,(_ADR,%2) \n" + " mov (_ADR,%2),%0 \n" /* flush */ + " mov (_ASR,%2),%0 \n" + " or %0,%0 \n" + " bne 1b \n" + : "=&r"(status), "=m"(*addr) + : "a"(ATOMIC_OPS_BASE_ADDR), "r"(addr), "r"(~mask) + : "memory", "cc"); +#else + unsigned long flags; + + mask = ~mask; + flags = arch_local_cli_save(); + *addr &= mask; + arch_local_irq_restore(flags); +#endif +} + +/** + * atomic_set_mask - Atomically set bits in memory + * @mask: Mask of the bits to be set + * @v: pointer to word in memory + * + * Atomically sets the bits set in mask from the memory word specified. + */ +static inline void atomic_set_mask(unsigned long mask, unsigned long *addr) +{ +#ifdef CONFIG_SMP + int status; + + asm volatile( + "1: mov %3,(_AAR,%2) \n" + " mov (_ADR,%2),%0 \n" + " or %4,%0 \n" + " mov %0,(_ADR,%2) \n" + " mov (_ADR,%2),%0 \n" /* flush */ + " mov (_ASR,%2),%0 \n" + " or %0,%0 \n" + " bne 1b \n" + : "=&r"(status), "=m"(*addr) + : "a"(ATOMIC_OPS_BASE_ADDR), "r"(addr), "r"(mask) + : "memory", "cc"); +#else + unsigned long flags; + + flags = arch_local_cli_save(); + *addr |= mask; + arch_local_irq_restore(flags); +#endif +} + +/* Atomic operations are already serializing on MN10300??? */ +#define smp_mb__before_atomic_dec() barrier() +#define smp_mb__after_atomic_dec() barrier() +#define smp_mb__before_atomic_inc() barrier() +#define smp_mb__after_atomic_inc() barrier() + +#include <asm-generic/atomic-long.h> + +#endif /* __KERNEL__ */ +#endif /* CONFIG_SMP */ +#endif /* _ASM_ATOMIC_H */ diff --git a/arch/mn10300/include/asm/bitops.h b/arch/mn10300/include/asm/bitops.h index 3f50e966107..3b8a868188f 100644 --- a/arch/mn10300/include/asm/bitops.h +++ b/arch/mn10300/include/asm/bitops.h @@ -57,7 +57,7 @@ #define clear_bit(nr, addr) ___clear_bit((nr), (addr)) -static inline void __clear_bit(int nr, volatile void *addr) +static inline void __clear_bit(unsigned long nr, volatile void *addr) { unsigned int *a = (unsigned int *) addr; int mask; @@ -70,15 +70,15 @@ static inline void __clear_bit(int nr, volatile void *addr) /* * test bit */ -static inline int test_bit(int nr, const volatile void *addr) +static inline int test_bit(unsigned long nr, const volatile void *addr) { - return 1UL & (((const unsigned int *) addr)[nr >> 5] >> (nr & 31)); + return 1UL & (((const volatile unsigned int *) addr)[nr >> 5] >> (nr & 31)); } /* * change bit */ -static inline void __change_bit(int nr, volatile void *addr) +static inline void __change_bit(unsigned long nr, volatile void *addr) { int mask; unsigned int *a = (unsigned int *) addr; @@ -88,7 +88,7 @@ static inline void __change_bit(int nr, volatile void *addr) *a ^= mask; } -extern void change_bit(int nr, volatile void *addr); +extern void change_bit(unsigned long nr, volatile void *addr); /* * test and set bit @@ -135,7 +135,7 @@ extern void change_bit(int nr, volatile void *addr); /* * test and change bit */ -static inline int __test_and_change_bit(int nr, volatile void *addr) +static inline int __test_and_change_bit(unsigned long nr, volatile void *addr) { int mask, retval; unsigned int *a = (unsigned int *)addr; @@ -148,7 +148,7 @@ static inline int __test_and_change_bit(int nr, volatile void *addr) return retval; } -extern int test_and_change_bit(int nr, volatile void *addr); +extern int test_and_change_bit(unsigned long nr, volatile void *addr); #include <asm-generic/bitops/lock.h> diff --git a/arch/mn10300/include/asm/cache.h b/arch/mn10300/include/asm/cache.h index 781bf613366..f29cde2cfc9 100644 --- a/arch/mn10300/include/asm/cache.h +++ b/arch/mn10300/include/asm/cache.h @@ -43,14 +43,18 @@ /* instruction cache access registers */ #define ICACHE_DATA(WAY, ENTRY, OFF) \ - __SYSREG(0xc8000000 + (WAY) * L1_CACHE_WAYDISP + (ENTRY) * 0x10 + (OFF) * 4, u32) + __SYSREG(0xc8000000 + (WAY) * L1_CACHE_WAYDISP + \ + (ENTRY) * L1_CACHE_BYTES + (OFF) * 4, u32) #define ICACHE_TAG(WAY, ENTRY) \ - __SYSREG(0xc8100000 + (WAY) * L1_CACHE_WAYDISP + (ENTRY) * 0x10, u32) + __SYSREG(0xc8100000 + (WAY) * L1_CACHE_WAYDISP + \ + (ENTRY) * L1_CACHE_BYTES, u32) -/* instruction cache access registers */ +/* data cache access registers */ #define DCACHE_DATA(WAY, ENTRY, OFF) \ - __SYSREG(0xc8200000 + (WAY) * L1_CACHE_WAYDISP + (ENTRY) * 0x10 + (OFF) * 4, u32) + __SYSREG(0xc8200000 + (WAY) * L1_CACHE_WAYDISP + \ + (ENTRY) * L1_CACHE_BYTES + (OFF) * 4, u32) #define DCACHE_TAG(WAY, ENTRY) \ - __SYSREG(0xc8300000 + (WAY) * L1_CACHE_WAYDISP + (ENTRY) * 0x10, u32) + __SYSREG(0xc8300000 + (WAY) * L1_CACHE_WAYDISP + \ + (ENTRY) * L1_CACHE_BYTES, u32) #endif /* _ASM_CACHE_H */ diff --git a/arch/mn10300/include/asm/cacheflush.h b/arch/mn10300/include/asm/cacheflush.h index 29e692f7f03..faed90240de 100644 --- a/arch/mn10300/include/asm/cacheflush.h +++ b/arch/mn10300/include/asm/cacheflush.h @@ -17,66 +17,55 @@ #include <linux/mm.h> /* - * virtually-indexed cache management (our cache is physically indexed) + * Primitive routines */ -#define flush_cache_all() do {} while (0) -#define flush_cache_mm(mm) do {} while (0) -#define flush_cache_dup_mm(mm) do {} while (0) -#define flush_cache_range(mm, start, end) do {} while (0) -#define flush_cache_page(vma, vmaddr, pfn) do {} while (0) -#define flush_cache_vmap(start, end) do {} while (0) -#define flush_cache_vunmap(start, end) do {} while (0) -#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 0 -#define flush_dcache_page(page) do {} while (0) -#define flush_dcache_mmap_lock(mapping) do {} while (0) -#define flush_dcache_mmap_unlock(mapping) do {} while (0) - -/* - * physically-indexed cache management - */ -#ifndef CONFIG_MN10300_CACHE_DISABLED - -extern void flush_icache_range(unsigned long start, unsigned long end); -extern void flush_icache_page(struct vm_area_struct *vma, struct page *pg); - -#else - -#define flush_icache_range(start, end) do {} while (0) -#define flush_icache_page(vma, pg) do {} while (0) - -#endif - -#define flush_icache_user_range(vma, pg, adr, len) \ - flush_icache_range(adr, adr + len) - -#define copy_to_user_page(vma, page, vaddr, dst, src, len) \ - do { \ - memcpy(dst, src, len); \ - flush_icache_page(vma, page); \ - } while (0) - -#define copy_from_user_page(vma, page, vaddr, dst, src, len) \ - memcpy(dst, src, len) - -/* - * primitive routines - */ -#ifndef CONFIG_MN10300_CACHE_DISABLED +#ifdef CONFIG_MN10300_CACHE_ENABLED +extern void mn10300_local_icache_inv(void); +extern void mn10300_local_icache_inv_page(unsigned long start); +extern void mn10300_local_icache_inv_range(unsigned long start, unsigned long end); +extern void mn10300_local_icache_inv_range2(unsigned long start, unsigned long size); +extern void mn10300_local_dcache_inv(void); +extern void mn10300_local_dcache_inv_page(unsigned long start); +extern void mn10300_local_dcache_inv_range(unsigned long start, unsigned long end); +extern void mn10300_local_dcache_inv_range2(unsigned long start, unsigned long size); extern void mn10300_icache_inv(void); +extern void mn10300_icache_inv_page(unsigned long start); +extern void mn10300_icache_inv_range(unsigned long start, unsigned long end); +extern void mn10300_icache_inv_range2(unsigned long start, unsigned long size); extern void mn10300_dcache_inv(void); -extern void mn10300_dcache_inv_page(unsigned start); -extern void mn10300_dcache_inv_range(unsigned start, unsigned end); -extern void mn10300_dcache_inv_range2(unsigned start, unsigned size); +extern void mn10300_dcache_inv_page(unsigned long start); +extern void mn10300_dcache_inv_range(unsigned long start, unsigned long end); +extern void mn10300_dcache_inv_range2(unsigned long start, unsigned long size); #ifdef CONFIG_MN10300_CACHE_WBACK +extern void mn10300_local_dcache_flush(void); +extern void mn10300_local_dcache_flush_page(unsigned long start); +extern void mn10300_local_dcache_flush_range(unsigned long start, unsigned long end); +extern void mn10300_local_dcache_flush_range2(unsigned long start, unsigned long size); +extern void mn10300_local_dcache_flush_inv(void); +extern void mn10300_local_dcache_flush_inv_page(unsigned long start); +extern void mn10300_local_dcache_flush_inv_range(unsigned long start, unsigned long end); +extern void mn10300_local_dcache_flush_inv_range2(unsigned long start, unsigned long size); extern void mn10300_dcache_flush(void); -extern void mn10300_dcache_flush_page(unsigned start); -extern void mn10300_dcache_flush_range(unsigned start, unsigned end); -extern void mn10300_dcache_flush_range2(unsigned start, unsigned size); +extern void mn10300_dcache_flush_page(unsigned long start); +extern void mn10300_dcache_flush_range(unsigned long start, unsigned long end); +extern void mn10300_dcache_flush_range2(unsigned long start, unsigned long size); extern void mn10300_dcache_flush_inv(void); -extern void mn10300_dcache_flush_inv_page(unsigned start); -extern void mn10300_dcache_flush_inv_range(unsigned start, unsigned end); -extern void mn10300_dcache_flush_inv_range2(unsigned start, unsigned size); +extern void mn10300_dcache_flush_inv_page(unsigned long start); +extern void mn10300_dcache_flush_inv_range(unsigned long start, unsigned long end); +extern void mn10300_dcache_flush_inv_range2(unsigned long start, unsigned long size); #else +#define mn10300_local_dcache_flush() do {} while (0) +#define mn10300_local_dcache_flush_page(start) do {} while (0) +#define mn10300_local_dcache_flush_range(start, end) do {} while (0) +#define mn10300_local_dcache_flush_range2(start, size) do {} while (0) +#define mn10300_local_dcache_flush_inv() \ + mn10300_local_dcache_inv() +#define mn10300_local_dcache_flush_inv_page(start) \ + mn10300_local_dcache_inv_page(start) +#define mn10300_local_dcache_flush_inv_range(start, end) \ + mn10300_local_dcache_inv_range(start, end) +#define mn10300_local_dcache_flush_inv_range2(start, size) \ + mn10300_local_dcache_inv_range2(start, size) #define mn10300_dcache_flush() do {} while (0) #define mn10300_dcache_flush_page(start) do {} while (0) #define mn10300_dcache_flush_range(start, end) do {} while (0) @@ -90,7 +79,26 @@ extern void mn10300_dcache_flush_inv_range2(unsigned start, unsigned size); mn10300_dcache_inv_range2((start), (size)) #endif /* CONFIG_MN10300_CACHE_WBACK */ #else +#define mn10300_local_icache_inv() do {} while (0) +#define mn10300_local_icache_inv_page(start) do {} while (0) +#define mn10300_local_icache_inv_range(start, end) do {} while (0) +#define mn10300_local_icache_inv_range2(start, size) do {} while (0) +#define mn10300_local_dcache_inv() do {} while (0) +#define mn10300_local_dcache_inv_page(start) do {} while (0) +#define mn10300_local_dcache_inv_range(start, end) do {} while (0) +#define mn10300_local_dcache_inv_range2(start, size) do {} while (0) +#define mn10300_local_dcache_flush() do {} while (0) +#define mn10300_local_dcache_flush_inv_page(start) do {} while (0) +#define mn10300_local_dcache_flush_inv() do {} while (0) +#define mn10300_local_dcache_flush_inv_range(start, end)do {} while (0) +#define mn10300_local_dcache_flush_inv_range2(start, size) do {} while (0) +#define mn10300_local_dcache_flush_page(start) do {} while (0) +#define mn10300_local_dcache_flush_range(start, end) do {} while (0) +#define mn10300_local_dcache_flush_range2(start, size) do {} while (0) #define mn10300_icache_inv() do {} while (0) +#define mn10300_icache_inv_page(start) do {} while (0) +#define mn10300_icache_inv_range(start, end) do {} while (0) +#define mn10300_icache_inv_range2(start, size) do {} while (0) #define mn10300_dcache_inv() do {} while (0) #define mn10300_dcache_inv_page(start) do {} while (0) #define mn10300_dcache_inv_range(start, end) do {} while (0) @@ -103,10 +111,56 @@ extern void mn10300_dcache_flush_inv_range2(unsigned start, unsigned size); #define mn10300_dcache_flush_page(start) do {} while (0) #define mn10300_dcache_flush_range(start, end) do {} while (0) #define mn10300_dcache_flush_range2(start, size) do {} while (0) -#endif /* CONFIG_MN10300_CACHE_DISABLED */ +#endif /* CONFIG_MN10300_CACHE_ENABLED */ + +/* + * Virtually-indexed cache management (our cache is physically indexed) + */ +#define flush_cache_all() do {} while (0) +#define flush_cache_mm(mm) do {} while (0) +#define flush_cache_dup_mm(mm) do {} while (0) +#define flush_cache_range(mm, start, end) do {} while (0) +#define flush_cache_page(vma, vmaddr, pfn) do {} while (0) +#define flush_cache_vmap(start, end) do {} while (0) +#define flush_cache_vunmap(start, end) do {} while (0) +#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 0 +#define flush_dcache_page(page) do {} while (0) +#define flush_dcache_mmap_lock(mapping) do {} while (0) +#define flush_dcache_mmap_unlock(mapping) do {} while (0) + +/* + * Physically-indexed cache management + */ +#if defined(CONFIG_MN10300_CACHE_FLUSH_ICACHE) +extern void flush_icache_page(struct vm_area_struct *vma, struct page *page); +extern void flush_icache_range(unsigned long start, unsigned long end); +#elif defined(CONFIG_MN10300_CACHE_INV_ICACHE) +static inline void flush_icache_page(struct vm_area_struct *vma, + struct page *page) +{ + mn10300_icache_inv_page(page_to_phys(page)); +} +extern void flush_icache_range(unsigned long start, unsigned long end); +#else +#define flush_icache_range(start, end) do {} while (0) +#define flush_icache_page(vma, pg) do {} while (0) +#endif + + +#define flush_icache_user_range(vma, pg, adr, len) \ + flush_icache_range(adr, adr + len) + +#define copy_to_user_page(vma, page, vaddr, dst, src, len) \ + do { \ + memcpy(dst, src, len); \ + flush_icache_page(vma, page); \ + } while (0) + +#define copy_from_user_page(vma, page, vaddr, dst, src, len) \ + memcpy(dst, src, len) /* - * internal debugging function + * Internal debugging function */ #ifdef CONFIG_DEBUG_PAGEALLOC extern void kernel_map_pages(struct page *page, int numpages, int enable); diff --git a/arch/mn10300/include/asm/cpu-regs.h b/arch/mn10300/include/asm/cpu-regs.h index 757e9b5388e..90ed4a365c9 100644 --- a/arch/mn10300/include/asm/cpu-regs.h +++ b/arch/mn10300/include/asm/cpu-regs.h @@ -15,7 +15,6 @@ #include <linux/types.h> #endif -#ifdef CONFIG_MN10300_CPU_AM33V2 /* we tell the compiler to pretend to be AM33 so that it doesn't try and use * the FP regs, but tell the assembler that we're actually allowed AM33v2 * instructions */ @@ -24,7 +23,6 @@ asm(" .am33_2\n"); #else .am33_2 #endif -#endif #ifdef __KERNEL__ @@ -58,6 +56,9 @@ asm(" .am33_2\n"); #define EPSW_nAR 0x00040000 /* register bank control */ #define EPSW_ML 0x00080000 /* monitor level */ #define EPSW_FE 0x00100000 /* FPU enable */ +#define EPSW_IM_SHIFT 8 /* EPSW_IM_SHIFT determines the interrupt mode */ + +#define NUM2EPSW_IM(num) ((num) << EPSW_IM_SHIFT) /* FPU registers */ #define FPCR_EF_I 0x00000001 /* inexact result FPU exception flag */ @@ -99,9 +100,11 @@ asm(" .am33_2\n"); #define CPUREV __SYSREGC(0xc0000050, u32) /* CPU revision register */ #define CPUREV_TYPE 0x0000000f /* CPU type */ #define CPUREV_TYPE_S 0 -#define CPUREV_TYPE_AM33V1 0x00000000 /* - AM33 V1 core, AM33/1.00 arch */ -#define CPUREV_TYPE_AM33V2 0x00000001 /* - AM33 V2 core, AM33/2.00 arch */ -#define CPUREV_TYPE_AM34V1 0x00000002 /* - AM34 V1 core, AM33/2.00 arch */ +#define CPUREV_TYPE_AM33_1 0x00000000 /* - AM33-1 core, AM33/1.00 arch */ +#define CPUREV_TYPE_AM33_2 0x00000001 /* - AM33-2 core, AM33/2.00 arch */ +#define CPUREV_TYPE_AM34_1 0x00000002 /* - AM34-1 core, AM33/2.00 arch */ +#define CPUREV_TYPE_AM33_3 0x00000003 /* - AM33-3 core, AM33/2.00 arch */ +#define CPUREV_TYPE_AM34_2 0x00000004 /* - AM34-2 core, AM33/3.00 arch */ #define CPUREV_REVISION 0x000000f0 /* CPU revision */ #define CPUREV_REVISION_S 4 #define CPUREV_ICWAY 0x00000f00 /* number of instruction cache ways */ @@ -180,6 +183,21 @@ asm(" .am33_2\n"); #define CHCTR_ICWMD 0x0f00 /* instruction cache way mode */ #define CHCTR_DCWMD 0xf000 /* data cache way mode */ +#ifdef CONFIG_AM34_2 +#define ICIVCR __SYSREG(0xc0000c00, u32) /* icache area invalidate control */ +#define ICIVCR_ICIVBSY 0x00000008 /* icache area invalidate busy */ +#define ICIVCR_ICI 0x00000001 /* icache area invalidate */ + +#define ICIVMR __SYSREG(0xc0000c04, u32) /* icache area invalidate mask */ + +#define DCPGCR __SYSREG(0xc0000c10, u32) /* data cache area purge control */ +#define DCPGCR_DCPGBSY 0x00000008 /* data cache area purge busy */ +#define DCPGCR_DCP 0x00000002 /* data cache area purge */ +#define DCPGCR_DCI 0x00000001 /* data cache area invalidate */ + +#define DCPGMR __SYSREG(0xc0000c14, u32) /* data cache area purge mask */ +#endif /* CONFIG_AM34_2 */ + /* MMU control registers */ #define MMUCTR __SYSREG(0xc0000090, u32) /* MMU control register */ #define MMUCTR_IRP 0x0000003f /* instruction TLB replace pointer */ @@ -203,6 +221,9 @@ asm(" .am33_2\n"); #define MMUCTR_DTL_LOCK0_3 0x03000000 /* - entry 0-3 locked */ #define MMUCTR_DTL_LOCK0_7 0x04000000 /* - entry 0-7 locked */ #define MMUCTR_DTL_LOCK0_15 0x05000000 /* - entry 0-15 locked */ +#ifdef CONFIG_AM34_2 +#define MMUCTR_WTE 0x80000000 /* write-through cache TLB entry bit enable */ +#endif #define PIDR __SYSREG(0xc0000094, u16) /* PID register */ #define PIDR_PID 0x00ff /* process identifier */ @@ -231,14 +252,6 @@ asm(" .am33_2\n"); #define xPTEL_PS_4Mb 0x00000c00 /* - 4Mb page */ #define xPTEL_PPN 0xfffff006 /* physical page number */ -#define xPTEL_V_BIT 0 /* bit numbers corresponding to above masks */ -#define xPTEL_UNUSED1_BIT 1 -#define xPTEL_UNUSED2_BIT 2 -#define xPTEL_C_BIT 3 -#define xPTEL_PV_BIT 4 -#define xPTEL_D_BIT 5 -#define xPTEL_G_BIT 9 - #define IPTEU __SYSREG(0xc00000a4, u32) /* instruction TLB virtual addr */ #define DPTEU __SYSREG(0xc00000b4, u32) /* data TLB virtual addr */ #define xPTEU_VPN 0xfffffc00 /* virtual page number */ @@ -262,7 +275,16 @@ asm(" .am33_2\n"); #define xPTEL2_PS_128Kb 0x00000100 /* - 128Kb page */ #define xPTEL2_PS_1Kb 0x00000200 /* - 1Kb page */ #define xPTEL2_PS_4Mb 0x00000300 /* - 4Mb page */ -#define xPTEL2_PPN 0xfffffc00 /* physical page number */ +#define xPTEL2_CWT 0x00000400 /* cacheable write-through */ +#define xPTEL2_UNUSED1 0x00000800 /* unused bit (broadcast mask) */ +#define xPTEL2_PPN 0xfffff000 /* physical page number */ + +#define xPTEL2_V_BIT 0 /* bit numbers corresponding to above masks */ +#define xPTEL2_C_BIT 1 +#define xPTEL2_PV_BIT 2 +#define xPTEL2_D_BIT 3 +#define xPTEL2_G_BIT 7 +#define xPTEL2_UNUSED1_BIT 11 #define MMUFCR __SYSREGC(0xc000009c, u32) /* MMU exception cause */ #define MMUFCR_IFC __SYSREGC(0xc000009c, u16) /* MMU instruction excep cause */ @@ -285,6 +307,47 @@ asm(" .am33_2\n"); #define MMUFCR_xFC_PR_RWK_RWU 0x01c0 /* - R/W kernel and R/W user */ #define MMUFCR_xFC_ILLADDR 0x0200 /* illegal address excep flag */ +#ifdef CONFIG_MN10300_HAS_ATOMIC_OPS_UNIT +/* atomic operation registers */ +#define AAR __SYSREG(0xc0000a00, u32) /* cacheable address */ +#define AAR2 __SYSREG(0xc0000a04, u32) /* uncacheable address */ +#define ADR __SYSREG(0xc0000a08, u32) /* data */ +#define ASR __SYSREG(0xc0000a0c, u32) /* status */ +#define AARU __SYSREG(0xd400aa00, u32) /* user address */ +#define ADRU __SYSREG(0xd400aa08, u32) /* user data */ +#define ASRU __SYSREG(0xd400aa0c, u32) /* user status */ + +#define ASR_RW 0x00000008 /* read */ +#define ASR_BW 0x00000004 /* bus error */ +#define ASR_IW 0x00000002 /* interrupt */ +#define ASR_LW 0x00000001 /* bus lock */ + +#define ASRU_RW ASR_RW /* read */ +#define ASRU_BW ASR_BW /* bus error */ +#define ASRU_IW ASR_IW /* interrupt */ +#define ASRU_LW ASR_LW /* bus lock */ + +/* in inline ASM, we stick the base pointer in to a reg and use offsets from + * it */ +#define ATOMIC_OPS_BASE_ADDR 0xc0000a00 +#ifndef __ASSEMBLY__ +asm( + "_AAR = 0\n" + "_AAR2 = 4\n" + "_ADR = 8\n" + "_ASR = 12\n"); +#else +#define _AAR 0 +#define _AAR2 4 +#define _ADR 8 +#define _ASR 12 +#endif + +/* physical page address for userspace atomic operations registers */ +#define USER_ATOMIC_OPS_PAGE_ADDR 0xd400a000 + +#endif /* CONFIG_MN10300_HAS_ATOMIC_OPS_UNIT */ + #endif /* __KERNEL__ */ #endif /* _ASM_CPU_REGS_H */ diff --git a/arch/mn10300/include/asm/dmactl-regs.h b/arch/mn10300/include/asm/dmactl-regs.h index 58a199da0f4..80337b339c9 100644 --- a/arch/mn10300/include/asm/dmactl-regs.h +++ b/arch/mn10300/include/asm/dmactl-regs.h @@ -11,91 +11,6 @@ #ifndef _ASM_DMACTL_REGS_H #define _ASM_DMACTL_REGS_H -#include <asm/cpu-regs.h> - -#ifdef __KERNEL__ - -/* DMA registers */ -#define DMxCTR(N) __SYSREG(0xd2000000 + ((N) * 0x100), u32) /* control reg */ -#define DMxCTR_BG 0x0000001f /* transfer request source */ -#define DMxCTR_BG_SOFT 0x00000000 /* - software source */ -#define DMxCTR_BG_SC0TX 0x00000002 /* - serial port 0 transmission */ -#define DMxCTR_BG_SC0RX 0x00000003 /* - serial port 0 reception */ -#define DMxCTR_BG_SC1TX 0x00000004 /* - serial port 1 transmission */ -#define DMxCTR_BG_SC1RX 0x00000005 /* - serial port 1 reception */ -#define DMxCTR_BG_SC2TX 0x00000006 /* - serial port 2 transmission */ -#define DMxCTR_BG_SC2RX 0x00000007 /* - serial port 2 reception */ -#define DMxCTR_BG_TM0UFLOW 0x00000008 /* - timer 0 underflow */ -#define DMxCTR_BG_TM1UFLOW 0x00000009 /* - timer 1 underflow */ -#define DMxCTR_BG_TM2UFLOW 0x0000000a /* - timer 2 underflow */ -#define DMxCTR_BG_TM3UFLOW 0x0000000b /* - timer 3 underflow */ -#define DMxCTR_BG_TM6ACMPCAP 0x0000000c /* - timer 6A compare/capture */ -#define DMxCTR_BG_AFE 0x0000000d /* - analogue front-end interrupt source */ -#define DMxCTR_BG_ADC 0x0000000e /* - A/D conversion end interrupt source */ -#define DMxCTR_BG_IRDA 0x0000000f /* - IrDA interrupt source */ -#define DMxCTR_BG_RTC 0x00000010 /* - RTC interrupt source */ -#define DMxCTR_BG_XIRQ0 0x00000011 /* - XIRQ0 pin interrupt source */ -#define DMxCTR_BG_XIRQ1 0x00000012 /* - XIRQ1 pin interrupt source */ -#define DMxCTR_BG_XDMR0 0x00000013 /* - external request 0 source (XDMR0 pin) */ -#define DMxCTR_BG_XDMR1 0x00000014 /* - external request 1 source (XDMR1 pin) */ -#define DMxCTR_SAM 0x000000e0 /* DMA transfer src addr mode */ -#define DMxCTR_SAM_INCR 0x00000000 /* - increment */ -#define DMxCTR_SAM_DECR 0x00000020 /* - decrement */ -#define DMxCTR_SAM_FIXED 0x00000040 /* - fixed */ -#define DMxCTR_DAM 0x00000000 /* DMA transfer dest addr mode */ -#define DMxCTR_DAM_INCR 0x00000000 /* - increment */ -#define DMxCTR_DAM_DECR 0x00000100 /* - decrement */ -#define DMxCTR_DAM_FIXED 0x00000200 /* - fixed */ -#define DMxCTR_TM 0x00001800 /* DMA transfer mode */ -#define DMxCTR_TM_BATCH 0x00000000 /* - batch transfer */ -#define DMxCTR_TM_INTERM 0x00001000 /* - intermittent transfer */ -#define DMxCTR_UT 0x00006000 /* DMA transfer unit */ -#define DMxCTR_UT_1 0x00000000 /* - 1 byte */ -#define DMxCTR_UT_2 0x00002000 /* - 2 byte */ -#define DMxCTR_UT_4 0x00004000 /* - 4 byte */ -#define DMxCTR_UT_16 0x00006000 /* - 16 byte */ -#define DMxCTR_TEN 0x00010000 /* DMA channel transfer enable */ -#define DMxCTR_RQM 0x00060000 /* external request input source mode */ -#define DMxCTR_RQM_FALLEDGE 0x00000000 /* - falling edge */ -#define DMxCTR_RQM_RISEEDGE 0x00020000 /* - rising edge */ -#define DMxCTR_RQM_LOLEVEL 0x00040000 /* - low level */ -#define DMxCTR_RQM_HILEVEL 0x00060000 /* - high level */ -#define DMxCTR_RQF 0x01000000 /* DMA transfer request flag */ -#define DMxCTR_XEND 0x80000000 /* DMA transfer end flag */ - -#define DMxSRC(N) __SYSREG(0xd2000004 + ((N) * 0x100), u32) /* control reg */ - -#define DMxDST(N) __SYSREG(0xd2000008 + ((N) * 0x100), u32) /* src addr reg */ - -#define DMxSIZ(N) __SYSREG(0xd200000c + ((N) * 0x100), u32) /* dest addr reg */ -#define DMxSIZ_CT 0x000fffff /* number of bytes to transfer */ - -#define DMxCYC(N) __SYSREG(0xd2000010 + ((N) * 0x100), u32) /* intermittent - * size reg */ -#define DMxCYC_CYC 0x000000ff /* number of interrmittent transfers -1 */ - -#define DM0IRQ 16 /* DMA channel 0 complete IRQ */ -#define DM1IRQ 17 /* DMA channel 1 complete IRQ */ -#define DM2IRQ 18 /* DMA channel 2 complete IRQ */ -#define DM3IRQ 19 /* DMA channel 3 complete IRQ */ - -#define DM0ICR GxICR(DM0IRQ) /* DMA channel 0 complete intr ctrl reg */ -#define DM1ICR GxICR(DM0IR1) /* DMA channel 1 complete intr ctrl reg */ -#define DM2ICR GxICR(DM0IR2) /* DMA channel 2 complete intr ctrl reg */ -#define DM3ICR GxICR(DM0IR3) /* DMA channel 3 complete intr ctrl reg */ - -#ifndef __ASSEMBLY__ - -struct mn10300_dmactl_regs { - u32 ctr; - const void *src; - void *dst; - u32 siz; - u32 cyc; -} __attribute__((aligned(0x100))); - -#endif /* __ASSEMBLY__ */ - -#endif /* __KERNEL__ */ +#include <proc/dmactl-regs.h> #endif /* _ASM_DMACTL_REGS_H */ diff --git a/arch/mn10300/include/asm/elf.h b/arch/mn10300/include/asm/elf.h index e5fa97cd9a1..8157c9267f4 100644 --- a/arch/mn10300/include/asm/elf.h +++ b/arch/mn10300/include/asm/elf.h @@ -32,6 +32,12 @@ #define R_MN10300_ALIGN 34 /* Alignment requirement. */ /* + * AM33/AM34 HW Capabilities + */ +#define HWCAP_MN10300_ATOMIC_OP_UNIT 1 /* Has AM34 Atomic Operations */ + + +/* * ELF register definitions.. */ typedef unsigned long elf_greg_t; @@ -47,8 +53,6 @@ typedef struct { u_int32_t fpcr; } elf_fpregset_t; -extern int dump_fpu(struct pt_regs *, elf_fpregset_t *); - /* * This is used to ensure we don't load something for the wrong architecture */ @@ -130,7 +134,11 @@ do { \ * instruction set this CPU supports. This could be done in user space, * but it's not easy, and we've already done it here. */ +#ifdef CONFIG_MN10300_HAS_ATOMIC_OPS_UNIT +#define ELF_HWCAP (HWCAP_MN10300_ATOMIC_OP_UNIT) +#else #define ELF_HWCAP (0) +#endif /* * This yields a string that ld.so will use to load implementation diff --git a/arch/mn10300/include/asm/exceptions.h b/arch/mn10300/include/asm/exceptions.h index fa16466ef3f..ca3e20508c7 100644 --- a/arch/mn10300/include/asm/exceptions.h +++ b/arch/mn10300/include/asm/exceptions.h @@ -15,8 +15,8 @@ /* * define the breakpoint instruction opcode to use - * - note that the JTAG unit steals 0xFF, so we want to avoid that if we can - * (can use 0xF7) + * - note that the JTAG unit steals 0xFF, so you can't use JTAG and GDBSTUB at + * the same time. */ #define GDBSTUB_BKPT 0xFF @@ -90,7 +90,6 @@ enum exception_code { extern void __set_intr_stub(enum exception_code code, void *handler); extern void set_intr_stub(enum exception_code code, void *handler); -extern void set_jtag_stub(enum exception_code code, void *handler); struct pt_regs; @@ -102,7 +101,6 @@ extern asmlinkage void dtlb_aerror(void); extern asmlinkage void raw_bus_error(void); extern asmlinkage void double_fault(void); extern asmlinkage int system_call(struct pt_regs *); -extern asmlinkage void fpu_exception(struct pt_regs *, enum exception_code); extern asmlinkage void nmi(struct pt_regs *, enum exception_code); extern asmlinkage void uninitialised_exception(struct pt_regs *, enum exception_code); @@ -116,6 +114,8 @@ extern void die(const char *, struct pt_regs *, enum exception_code) extern int die_if_no_fixup(const char *, struct pt_regs *, enum exception_code); +#define NUM2EXCEP_IRQ_LEVEL(num) (EXCEP_IRQ_LEVEL0 + (num) * 8) + #endif /* __ASSEMBLY__ */ #endif /* _ASM_EXCEPTIONS_H */ diff --git a/arch/mn10300/include/asm/fpu.h b/arch/mn10300/include/asm/fpu.h index 64a2b83a7a6..b7625de8ead 100644 --- a/arch/mn10300/include/asm/fpu.h +++ b/arch/mn10300/include/asm/fpu.h @@ -12,74 +12,125 @@ #ifndef _ASM_FPU_H #define _ASM_FPU_H -#include <asm/processor.h> +#ifndef __ASSEMBLY__ + +#include <linux/sched.h> +#include <asm/exceptions.h> #include <asm/sigcontext.h> -#include <asm/user.h> #ifdef __KERNEL__ -/* the task that owns the FPU state */ +extern asmlinkage void fpu_disabled(void); + +#ifdef CONFIG_FPU + +#ifdef CONFIG_LAZY_SAVE_FPU +/* the task that currently owns the FPU state */ extern struct task_struct *fpu_state_owner; +#endif -#define set_using_fpu(tsk) \ -do { \ - (tsk)->thread.fpu_flags |= THREAD_USING_FPU; \ -} while (0) +#if (THREAD_USING_FPU & ~0xff) +#error THREAD_USING_FPU must be smaller than 0x100. +#endif -#define clear_using_fpu(tsk) \ -do { \ - (tsk)->thread.fpu_flags &= ~THREAD_USING_FPU; \ -} while (0) +static inline void set_using_fpu(struct task_struct *tsk) +{ + asm volatile( + "bset %0,(0,%1)" + : + : "i"(THREAD_USING_FPU), "a"(&tsk->thread.fpu_flags) + : "memory", "cc"); +} -#define is_using_fpu(tsk) ((tsk)->thread.fpu_flags & THREAD_USING_FPU) +static inline void clear_using_fpu(struct task_struct *tsk) +{ + asm volatile( + "bclr %0,(0,%1)" + : + : "i"(THREAD_USING_FPU), "a"(&tsk->thread.fpu_flags) + : "memory", "cc"); +} -#define unlazy_fpu(tsk) \ -do { \ - preempt_disable(); \ - if (fpu_state_owner == (tsk)) \ - fpu_save(&tsk->thread.fpu_state); \ - preempt_enable(); \ -} while (0) - -#define exit_fpu() \ -do { \ - struct task_struct *__tsk = current; \ - preempt_disable(); \ - if (fpu_state_owner == __tsk) \ - fpu_state_owner = NULL; \ - preempt_enable(); \ -} while (0) - -#define flush_fpu() \ -do { \ - struct task_struct *__tsk = current; \ - preempt_disable(); \ - if (fpu_state_owner == __tsk) { \ - fpu_state_owner = NULL; \ - __tsk->thread.uregs->epsw &= ~EPSW_FE; \ - } \ - preempt_enable(); \ - clear_using_fpu(__tsk); \ -} while (0) +#define is_using_fpu(tsk) ((tsk)->thread.fpu_flags & THREAD_USING_FPU) -extern asmlinkage void fpu_init_state(void); extern asmlinkage void fpu_kill_state(struct task_struct *); -extern asmlinkage void fpu_disabled(struct pt_regs *, enum exception_code); extern asmlinkage void fpu_exception(struct pt_regs *, enum exception_code); - -#ifdef CONFIG_FPU +extern asmlinkage void fpu_invalid_op(struct pt_regs *, enum exception_code); +extern asmlinkage void fpu_init_state(void); extern asmlinkage void fpu_save(struct fpu_state_struct *); -extern asmlinkage void fpu_restore(struct fpu_state_struct *); -#else -#define fpu_save(a) -#define fpu_restore(a) -#endif /* CONFIG_FPU */ - -/* - * signal frame handlers - */ extern int fpu_setup_sigcontext(struct fpucontext *buf); extern int fpu_restore_sigcontext(struct fpucontext *buf); +static inline void unlazy_fpu(struct task_struct *tsk) +{ + preempt_disable(); +#ifndef CONFIG_LAZY_SAVE_FPU + if (tsk->thread.fpu_flags & THREAD_HAS_FPU) { + fpu_save(&tsk->thread.fpu_state); + tsk->thread.fpu_flags &= ~THREAD_HAS_FPU; + tsk->thread.uregs->epsw &= ~EPSW_FE; + } +#else + if (fpu_state_owner == tsk) + fpu_save(&tsk->thread.fpu_state); +#endif + preempt_enable(); +} + +static inline void exit_fpu(void) +{ +#ifdef CONFIG_LAZY_SAVE_FPU + struct task_struct *tsk = current; + + preempt_disable(); + if (fpu_state_owner == tsk) + fpu_state_owner = NULL; + preempt_enable(); +#endif +} + +static inline void flush_fpu(void) +{ + struct task_struct *tsk = current; + + preempt_disable(); +#ifndef CONFIG_LAZY_SAVE_FPU + if (tsk->thread.fpu_flags & THREAD_HAS_FPU) { + tsk->thread.fpu_flags &= ~THREAD_HAS_FPU; + tsk->thread.uregs->epsw &= ~EPSW_FE; + } +#else + if (fpu_state_owner == tsk) { + fpu_state_owner = NULL; + tsk->thread.uregs->epsw &= ~EPSW_FE; + } +#endif + preempt_enable(); + clear_using_fpu(tsk); +} + +#else /* CONFIG_FPU */ + +extern asmlinkage +void unexpected_fpu_exception(struct pt_regs *, enum exception_code); +#define fpu_invalid_op unexpected_fpu_exception +#define fpu_exception unexpected_fpu_exception + +struct task_struct; +struct fpu_state_struct; +static inline bool is_using_fpu(struct task_struct *tsk) { return false; } +static inline void set_using_fpu(struct task_struct *tsk) {} +static inline void clear_using_fpu(struct task_struct *tsk) {} +static inline void fpu_init_state(void) {} +static inline void fpu_save(struct fpu_state_struct *s) {} +static inline void fpu_kill_state(struct task_struct *tsk) {} +static inline void unlazy_fpu(struct task_struct *tsk) {} +static inline void exit_fpu(void) {} +static inline void flush_fpu(void) {} +static inline int fpu_setup_sigcontext(struct fpucontext *buf) { return 0; } +static inline int fpu_restore_sigcontext(struct fpucontext *buf) { return 0; } +#endif /* CONFIG_FPU */ + #endif /* __KERNEL__ */ +#endif /* !__ASSEMBLY__ */ #endif /* _ASM_FPU_H */ diff --git a/arch/mn10300/include/asm/frame.inc b/arch/mn10300/include/asm/frame.inc index 5b1949bdf03..2ee58e3eb6b 100644 --- a/arch/mn10300/include/asm/frame.inc +++ b/arch/mn10300/include/asm/frame.inc @@ -18,6 +18,7 @@ #ifndef __ASM_OFFSETS_H__ #include <asm/asm-offsets.h> #endif +#include <asm/thread_info.h> #define pi break @@ -37,11 +38,15 @@ movm [d2,d3,a2,a3,exreg0,exreg1,exother],(sp) mov sp,fp # FRAME pointer in A3 add -12,sp # allow for calls to be made - mov (__frame),a1 - mov a1,(REG_NEXT,fp) - mov fp,(__frame) - and ~EPSW_FE,epsw # disable the FPU inside the kernel + # push the exception frame onto the front of the list + GET_THREAD_INFO a1 + mov (TI_frame,a1),a0 + mov a0,(REG_NEXT,fp) + mov fp,(TI_frame,a1) + + # disable the FPU inside the kernel + and ~EPSW_FE,epsw # we may be holding current in E2 #ifdef CONFIG_MN10300_CURRENT_IN_E2 @@ -57,10 +62,11 @@ .macro RESTORE_ALL # peel back the stack to the calling frame # - this permits execve() to discard extra frames due to kernel syscalls - mov (__frame),fp + GET_THREAD_INFO a0 + mov (TI_frame,a0),fp mov fp,sp - mov (REG_NEXT,fp),d0 # userspace has regs->next == 0 - mov d0,(__frame) + mov (REG_NEXT,fp),d0 + mov d0,(TI_frame,a0) # userspace has regs->next == 0 #ifndef CONFIG_MN10300_USING_JTAG mov (REG_EPSW,fp),d0 diff --git a/arch/mn10300/include/asm/gdb-stub.h b/arch/mn10300/include/asm/gdb-stub.h index 41ed2676396..f5495ad82b7 100644 --- a/arch/mn10300/include/asm/gdb-stub.h +++ b/arch/mn10300/include/asm/gdb-stub.h @@ -110,7 +110,7 @@ extern asmlinkage void gdbstub_exception(struct pt_regs *, enum exception_code); extern asmlinkage void __gdbstub_bug_trap(void); extern asmlinkage void __gdbstub_pause(void); -#ifndef CONFIG_MN10300_CACHE_DISABLED +#ifdef CONFIG_MN10300_CACHE_ENABLED extern asmlinkage void gdbstub_purge_cache(void); #else #define gdbstub_purge_cache() do {} while (0) diff --git a/arch/mn10300/include/asm/hardirq.h b/arch/mn10300/include/asm/hardirq.h index 54d95011767..0000d650b55 100644 --- a/arch/mn10300/include/asm/hardirq.h +++ b/arch/mn10300/include/asm/hardirq.h @@ -19,9 +19,10 @@ /* assembly code in softirq.h is sensitive to the offsets of these fields */ typedef struct { unsigned int __softirq_pending; - unsigned long idle_timestamp; +#ifdef CONFIG_MN10300_WD_TIMER unsigned int __nmi_count; /* arch dependent */ unsigned int __irq_count; /* arch dependent */ +#endif } ____cacheline_aligned irq_cpustat_t; #include <linux/irq_cpustat.h> /* Standard mappings for irq_cpustat_t above */ diff --git a/arch/mn10300/include/asm/highmem.h b/arch/mn10300/include/asm/highmem.h index e2155e68645..bfe2d88604d 100644 --- a/arch/mn10300/include/asm/highmem.h +++ b/arch/mn10300/include/asm/highmem.h @@ -87,7 +87,7 @@ static inline unsigned long __kmap_atomic(struct page *page) BUG(); #endif set_pte(kmap_pte - idx, mk_pte(page, kmap_prot)); - __flush_tlb_one(vaddr); + local_flush_tlb_one(vaddr); return vaddr; } @@ -116,7 +116,7 @@ static inline void __kunmap_atomic(unsigned long vaddr) * this pte without first remap it */ pte_clear(kmap_pte - idx); - __flush_tlb_one(vaddr); + local_flush_tlb_one(vaddr); } #endif diff --git a/arch/mn10300/include/asm/intctl-regs.h b/arch/mn10300/include/asm/intctl-regs.h index ba544c796c5..585b708c2bc 100644 --- a/arch/mn10300/include/asm/intctl-regs.h +++ b/arch/mn10300/include/asm/intctl-regs.h @@ -15,24 +15,19 @@ #ifdef __KERNEL__ -/* interrupt controller registers */ -#define GxICR(X) __SYSREG(0xd4000000 + (X) * 4, u16) /* group irq ctrl regs */ - -#define IAGR __SYSREG(0xd4000100, u16) /* intr acceptance group reg */ -#define IAGR_GN 0x00fc /* group number register - * (documentation _has_ to be wrong) - */ +/* + * Interrupt controller registers + * - Registers 64-191 are at addresses offset from the main array + */ +#define GxICR(X) \ + __SYSREG(0xd4000000 + (X) * 4 + \ + (((X) >= 64) && ((X) < 192)) * 0xf00, u16) -#define EXTMD __SYSREG(0xd4000200, u16) /* external pin intr spec reg */ -#define GET_XIRQ_TRIGGER(X) ((EXTMD >> ((X) * 2)) & 3) +#define GxICR_u8(X) \ + __SYSREG(0xd4000000 + (X) * 4 + \ + (((X) >= 64) && ((X) < 192)) * 0xf00, u8) -#define SET_XIRQ_TRIGGER(X,Y) \ -do { \ - u16 x = EXTMD; \ - x &= ~(3 << ((X) * 2)); \ - x |= ((Y) & 3) << ((X) * 2); \ - EXTMD = x; \ -} while (0) +#include <proc/intctl-regs.h> #define XIRQ_TRIGGER_LOWLEVEL 0 #define XIRQ_TRIGGER_HILEVEL 1 @@ -59,10 +54,18 @@ do { \ #define GxICR_LEVEL_5 0x5000 /* - level 5 */ #define GxICR_LEVEL_6 0x6000 /* - level 6 */ #define GxICR_LEVEL_SHIFT 12 +#define GxICR_NMI 0x8000 /* nmi request flag */ + +#define NUM2GxICR_LEVEL(num) ((num) << GxICR_LEVEL_SHIFT) #ifndef __ASSEMBLY__ extern void set_intr_level(int irq, u16 level); -extern void set_intr_postackable(int irq); +extern void mn10300_intc_set_level(unsigned int irq, unsigned int level); +extern void mn10300_intc_clear(unsigned int irq); +extern void mn10300_intc_set(unsigned int irq); +extern void mn10300_intc_enable(unsigned int irq); +extern void mn10300_intc_disable(unsigned int irq); +extern void mn10300_set_lateack_irq_type(int irq); #endif /* external interrupts */ diff --git a/arch/mn10300/include/asm/io.h b/arch/mn10300/include/asm/io.h index c1a4119e649..787255da744 100644 --- a/arch/mn10300/include/asm/io.h +++ b/arch/mn10300/include/asm/io.h @@ -206,6 +206,19 @@ static inline void outsl(unsigned long addr, const void *buffer, int count) #define iowrite32_rep(p, src, count) \ outsl((unsigned long) (p), (src), (count)) +#define readsb(p, dst, count) \ + insb((unsigned long) (p), (dst), (count)) +#define readsw(p, dst, count) \ + insw((unsigned long) (p), (dst), (count)) +#define readsl(p, dst, count) \ + insl((unsigned long) (p), (dst), (count)) + +#define writesb(p, src, count) \ + outsb((unsigned long) (p), (src), (count)) +#define writesw(p, src, count) \ + outsw((unsigned long) (p), (src), (count)) +#define writesl(p, src, count) \ + outsl((unsigned long) (p), (src), (count)) #define IO_SPACE_LIMIT 0xffffffff diff --git a/arch/mn10300/include/asm/irq.h b/arch/mn10300/include/asm/irq.h index 25c045d16d1..1a73fb3f60c 100644 --- a/arch/mn10300/include/asm/irq.h +++ b/arch/mn10300/include/asm/irq.h @@ -21,8 +21,16 @@ /* this number is used when no interrupt has been assigned */ #define NO_IRQ INT_MAX -/* hardware irq numbers */ -#define NR_IRQS GxICR_NUM_IRQS +/* + * hardware irq numbers + * - the ASB2364 has an FPGA with an IRQ multiplexer on it + */ +#ifdef CONFIG_MN10300_UNIT_ASB2364 +#include <unit/irq.h> +#else +#define NR_CPU_IRQS GxICR_NUM_IRQS +#define NR_IRQS NR_CPU_IRQS +#endif /* external hardware irq numbers */ #define NR_XIRQS GxICR_NUM_XIRQS diff --git a/arch/mn10300/include/asm/irq_regs.h b/arch/mn10300/include/asm/irq_regs.h index a848cd232eb..97d0cb5af80 100644 --- a/arch/mn10300/include/asm/irq_regs.h +++ b/arch/mn10300/include/asm/irq_regs.h @@ -18,7 +18,11 @@ #define ARCH_HAS_OWN_IRQ_REGS #ifndef __ASSEMBLY__ -#define get_irq_regs() (__frame) +static inline __attribute__((const)) +struct pt_regs *get_irq_regs(void) +{ + return current_frame(); +} #endif #endif /* _ASM_IRQ_REGS_H */ diff --git a/arch/mn10300/include/asm/irqflags.h b/arch/mn10300/include/asm/irqflags.h index 5e529a117cb..7a7ae12c711 100644 --- a/arch/mn10300/include/asm/irqflags.h +++ b/arch/mn10300/include/asm/irqflags.h @@ -13,6 +13,9 @@ #define _ASM_IRQFLAGS_H #include <asm/cpu-regs.h> +#ifndef __ASSEMBLY__ +#include <linux/smp.h> +#endif /* * interrupt control @@ -23,11 +26,7 @@ * - level 6 - timer interrupt * - "enabled": run in IM7 */ -#ifdef CONFIG_MN10300_TTYSM -#define MN10300_CLI_LEVEL EPSW_IM_2 -#else -#define MN10300_CLI_LEVEL EPSW_IM_1 -#endif +#define MN10300_CLI_LEVEL (CONFIG_LINUX_CLI_LEVEL << EPSW_IM_SHIFT) #ifndef __ASSEMBLY__ @@ -64,11 +63,12 @@ static inline unsigned long arch_local_irq_save(void) /* * we make sure arch_irq_enable() doesn't cause priority inversion */ -extern unsigned long __mn10300_irq_enabled_epsw; +extern unsigned long __mn10300_irq_enabled_epsw[]; static inline void arch_local_irq_enable(void) { unsigned long tmp; + int cpu = raw_smp_processor_id(); asm volatile( " mov epsw,%0 \n" @@ -76,8 +76,8 @@ static inline void arch_local_irq_enable(void) " or %2,%0 \n" " mov %0,epsw \n" : "=&d"(tmp) - : "i"(~EPSW_IM), "r"(__mn10300_irq_enabled_epsw) - : "memory"); + : "i"(~EPSW_IM), "r"(__mn10300_irq_enabled_epsw[cpu]) + : "memory", "cc"); } static inline void arch_local_irq_restore(unsigned long flags) @@ -94,7 +94,7 @@ static inline void arch_local_irq_restore(unsigned long flags) static inline bool arch_irqs_disabled_flags(unsigned long flags) { - return (flags & EPSW_IM) <= MN10300_CLI_LEVEL; + return (flags & (EPSW_IE | EPSW_IM)) != (EPSW_IE | EPSW_IM_7); } static inline bool arch_irqs_disabled(void) @@ -109,6 +109,9 @@ static inline bool arch_irqs_disabled(void) */ static inline void arch_safe_halt(void) { +#ifdef CONFIG_SMP + arch_local_irq_enable(); +#else asm volatile( " or %0,epsw \n" " nop \n" @@ -117,7 +120,97 @@ static inline void arch_safe_halt(void) : : "i"(EPSW_IE|EPSW_IM), "n"(&CPUM), "i"(CPUM_SLEEP) : "cc"); +#endif } +#define __sleep_cpu() \ +do { \ + asm volatile( \ + " bset %1,(%0)\n" \ + "1: btst %1,(%0)\n" \ + " bne 1b\n" \ + : \ + : "i"(&CPUM), "i"(CPUM_SLEEP) \ + : "cc" \ + ); \ +} while (0) + +static inline void arch_local_cli(void) +{ + asm volatile( + " and %0,epsw \n" + " nop \n" + " nop \n" + " nop \n" + : + : "i"(~EPSW_IE) + : "memory" + ); +} + +static inline unsigned long arch_local_cli_save(void) +{ + unsigned long flags = arch_local_save_flags(); + arch_local_cli(); + return flags; +} + +static inline void arch_local_sti(void) +{ + asm volatile( + " or %0,epsw \n" + : + : "i"(EPSW_IE) + : "memory"); +} + +static inline void arch_local_change_intr_mask_level(unsigned long level) +{ + asm volatile( + " and %0,epsw \n" + " or %1,epsw \n" + : + : "i"(~EPSW_IM), "i"(EPSW_IE | level) + : "cc", "memory"); +} + +#else /* !__ASSEMBLY__ */ + +#define LOCAL_SAVE_FLAGS(reg) \ + mov epsw,reg + +#define LOCAL_IRQ_DISABLE \ + and ~EPSW_IM,epsw; \ + or EPSW_IE|MN10300_CLI_LEVEL,epsw; \ + nop; \ + nop; \ + nop + +#define LOCAL_IRQ_ENABLE \ + or EPSW_IE|EPSW_IM_7,epsw + +#define LOCAL_IRQ_RESTORE(reg) \ + mov reg,epsw + +#define LOCAL_CLI_SAVE(reg) \ + mov epsw,reg; \ + and ~EPSW_IE,epsw; \ + nop; \ + nop; \ + nop + +#define LOCAL_CLI \ + and ~EPSW_IE,epsw; \ + nop; \ + nop; \ + nop + +#define LOCAL_STI \ + or EPSW_IE,epsw + +#define LOCAL_CHANGE_INTR_MASK_LEVEL(level) \ + and ~EPSW_IM,epsw; \ + or EPSW_IE|(level),epsw + #endif /* __ASSEMBLY__ */ #endif /* _ASM_IRQFLAGS_H */ diff --git a/arch/mn10300/include/asm/mmu_context.h b/arch/mn10300/include/asm/mmu_context.h index cb294c244de..c8f6c82672a 100644 --- a/arch/mn10300/include/asm/mmu_context.h +++ b/arch/mn10300/include/asm/mmu_context.h @@ -27,28 +27,38 @@ #include <asm/tlbflush.h> #include <asm-generic/mm_hooks.h> +#define MMU_CONTEXT_TLBPID_NR 256 #define MMU_CONTEXT_TLBPID_MASK 0x000000ffUL #define MMU_CONTEXT_VERSION_MASK 0xffffff00UL #define MMU_CONTEXT_FIRST_VERSION 0x00000100UL #define MMU_NO_CONTEXT 0x00000000UL - -extern unsigned long mmu_context_cache[NR_CPUS]; -#define mm_context(mm) (mm->context.tlbpid[smp_processor_id()]) +#define MMU_CONTEXT_TLBPID_LOCK_NR 0 #define enter_lazy_tlb(mm, tsk) do {} while (0) +static inline void cpu_ran_vm(int cpu, struct mm_struct *mm) +{ #ifdef CONFIG_SMP -#define cpu_ran_vm(cpu, mm) \ - cpumask_set_cpu((cpu), mm_cpumask(mm)) -#define cpu_maybe_ran_vm(cpu, mm) \ - cpumask_test_and_set_cpu((cpu), mm_cpumask(mm)) + cpumask_set_cpu(cpu, mm_cpumask(mm)); +#endif +} + +static inline bool cpu_maybe_ran_vm(int cpu, struct mm_struct *mm) +{ +#ifdef CONFIG_SMP + return cpumask_test_and_set_cpu(cpu, mm_cpumask(mm)); #else -#define cpu_ran_vm(cpu, mm) do {} while (0) -#define cpu_maybe_ran_vm(cpu, mm) true -#endif /* CONFIG_SMP */ + return true; +#endif +} -/* - * allocate an MMU context +#ifdef CONFIG_MN10300_TLB_USE_PIDR +extern unsigned long mmu_context_cache[NR_CPUS]; +#define mm_context(mm) (mm->context.tlbpid[smp_processor_id()]) + +/** + * allocate_mmu_context - Allocate storage for the arch-specific MMU data + * @mm: The userspace VM context being set up */ static inline unsigned long allocate_mmu_context(struct mm_struct *mm) { @@ -58,7 +68,7 @@ static inline unsigned long allocate_mmu_context(struct mm_struct *mm) if (!(mc & MMU_CONTEXT_TLBPID_MASK)) { /* we exhausted the TLB PIDs of this version on this CPU, so we * flush this CPU's TLB in its entirety and start new cycle */ - flush_tlb_all(); + local_flush_tlb_all(); /* fix the TLB version if needed (we avoid version #0 so as to * distingush MMU_NO_CONTEXT) */ @@ -101,22 +111,34 @@ static inline int init_new_context(struct task_struct *tsk, } /* - * destroy context related info for an mm_struct that is about to be put to - * rest - */ -#define destroy_context(mm) do { } while (0) - -/* * after we have set current->mm to a new value, this activates the context for * the new mm so we see the new mappings. */ -static inline void activate_context(struct mm_struct *mm, int cpu) +static inline void activate_context(struct mm_struct *mm) { PIDR = get_mmu_context(mm) & MMU_CONTEXT_TLBPID_MASK; } +#else /* CONFIG_MN10300_TLB_USE_PIDR */ -/* - * change between virtual memory sets +#define init_new_context(tsk, mm) (0) +#define activate_context(mm) local_flush_tlb() + +#endif /* CONFIG_MN10300_TLB_USE_PIDR */ + +/** + * destroy_context - Destroy mm context information + * @mm: The MM being destroyed. + * + * Destroy context related info for an mm_struct that is about to be put to + * rest + */ +#define destroy_context(mm) do {} while (0) + +/** + * switch_mm - Change between userspace virtual memory contexts + * @prev: The outgoing MM context. + * @next: The incoming MM context. + * @tsk: The incoming task. */ static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, struct task_struct *tsk) @@ -124,11 +146,12 @@ static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, int cpu = smp_processor_id(); if (prev != next) { +#ifdef CONFIG_SMP + per_cpu(cpu_tlbstate, cpu).active_mm = next; +#endif cpu_ran_vm(cpu, next); - activate_context(next, cpu); PTBR = (unsigned long) next->pgd; - } else if (!cpu_maybe_ran_vm(cpu, next)) { - activate_context(next, cpu); + activate_context(next); } } diff --git a/arch/mn10300/include/asm/pgalloc.h b/arch/mn10300/include/asm/pgalloc.h index a19f11327cd..146bacf193e 100644 --- a/arch/mn10300/include/asm/pgalloc.h +++ b/arch/mn10300/include/asm/pgalloc.h @@ -11,7 +11,6 @@ #ifndef _ASM_PGALLOC_H #define _ASM_PGALLOC_H -#include <asm/processor.h> #include <asm/page.h> #include <linux/threads.h> #include <linux/mm.h> /* for struct page */ diff --git a/arch/mn10300/include/asm/pgtable.h b/arch/mn10300/include/asm/pgtable.h index b049a8bd157..a1e894b5f65 100644 --- a/arch/mn10300/include/asm/pgtable.h +++ b/arch/mn10300/include/asm/pgtable.h @@ -90,46 +90,58 @@ extern pgd_t swapper_pg_dir[PTRS_PER_PGD]; * The vmalloc() routines also leaves a hole of 4kB between each vmalloced * area to catch addressing errors. */ +#ifndef __ASSEMBLY__ +#define VMALLOC_OFFSET (8UL * 1024 * 1024) +#define VMALLOC_START (0x70000000UL) +#define VMALLOC_END (0x7C000000UL) +#else #define VMALLOC_OFFSET (8 * 1024 * 1024) #define VMALLOC_START (0x70000000) #define VMALLOC_END (0x7C000000) +#endif #ifndef __ASSEMBLY__ extern pte_t kernel_vmalloc_ptes[(VMALLOC_END - VMALLOC_START) / PAGE_SIZE]; #endif -/* IPTEL/DPTEL bit assignments */ -#define _PAGE_BIT_VALID xPTEL_V_BIT -#define _PAGE_BIT_ACCESSED xPTEL_UNUSED1_BIT /* mustn't be loaded into IPTEL/DPTEL */ -#define _PAGE_BIT_NX xPTEL_UNUSED2_BIT /* mustn't be loaded into IPTEL/DPTEL */ -#define _PAGE_BIT_CACHE xPTEL_C_BIT -#define _PAGE_BIT_PRESENT xPTEL_PV_BIT -#define _PAGE_BIT_DIRTY xPTEL_D_BIT -#define _PAGE_BIT_GLOBAL xPTEL_G_BIT - -#define _PAGE_VALID xPTEL_V -#define _PAGE_ACCESSED xPTEL_UNUSED1 -#define _PAGE_NX xPTEL_UNUSED2 /* no-execute bit */ -#define _PAGE_CACHE xPTEL_C -#define _PAGE_PRESENT xPTEL_PV -#define _PAGE_DIRTY xPTEL_D -#define _PAGE_PROT xPTEL_PR -#define _PAGE_PROT_RKNU xPTEL_PR_ROK -#define _PAGE_PROT_WKNU xPTEL_PR_RWK -#define _PAGE_PROT_RKRU xPTEL_PR_ROK_ROU -#define _PAGE_PROT_WKRU xPTEL_PR_RWK_ROU -#define _PAGE_PROT_WKWU xPTEL_PR_RWK_RWU -#define _PAGE_GLOBAL xPTEL_G -#define _PAGE_PSE xPTEL_PS_4Mb /* 4MB page */ - -#define _PAGE_FILE xPTEL_UNUSED1_BIT /* set:pagecache unset:swap */ - -#define __PAGE_PROT_UWAUX 0x040 -#define __PAGE_PROT_USER 0x080 -#define __PAGE_PROT_WRITE 0x100 +/* IPTEL2/DPTEL2 bit assignments */ +#define _PAGE_BIT_VALID xPTEL2_V_BIT +#define _PAGE_BIT_CACHE xPTEL2_C_BIT +#define _PAGE_BIT_PRESENT xPTEL2_PV_BIT +#define _PAGE_BIT_DIRTY xPTEL2_D_BIT +#define _PAGE_BIT_GLOBAL xPTEL2_G_BIT +#define _PAGE_BIT_ACCESSED xPTEL2_UNUSED1_BIT /* mustn't be loaded into IPTEL2/DPTEL2 */ + +#define _PAGE_VALID xPTEL2_V +#define _PAGE_CACHE xPTEL2_C +#define _PAGE_PRESENT xPTEL2_PV +#define _PAGE_DIRTY xPTEL2_D +#define _PAGE_PROT xPTEL2_PR +#define _PAGE_PROT_RKNU xPTEL2_PR_ROK +#define _PAGE_PROT_WKNU xPTEL2_PR_RWK +#define _PAGE_PROT_RKRU xPTEL2_PR_ROK_ROU +#define _PAGE_PROT_WKRU xPTEL2_PR_RWK_ROU +#define _PAGE_PROT_WKWU xPTEL2_PR_RWK_RWU +#define _PAGE_GLOBAL xPTEL2_G +#define _PAGE_PS_MASK xPTEL2_PS +#define _PAGE_PS_4Kb xPTEL2_PS_4Kb +#define _PAGE_PS_128Kb xPTEL2_PS_128Kb +#define _PAGE_PS_1Kb xPTEL2_PS_1Kb +#define _PAGE_PS_4Mb xPTEL2_PS_4Mb +#define _PAGE_PSE xPTEL2_PS_4Mb /* 4MB page */ +#define _PAGE_CACHE_WT xPTEL2_CWT +#define _PAGE_ACCESSED xPTEL2_UNUSED1 +#define _PAGE_NX 0 /* no-execute bit */ + +/* If _PAGE_VALID is clear, we use these: */ +#define _PAGE_FILE xPTEL2_C /* set:pagecache unset:swap */ +#define _PAGE_PROTNONE 0x000 /* If not present */ + +#define __PAGE_PROT_UWAUX 0x010 +#define __PAGE_PROT_USER 0x020 +#define __PAGE_PROT_WRITE 0x040 #define _PAGE_PRESENTV (_PAGE_PRESENT|_PAGE_VALID) -#define _PAGE_PROTNONE 0x000 /* If not present */ #ifndef __ASSEMBLY__ @@ -170,6 +182,9 @@ extern pte_t kernel_vmalloc_ptes[(VMALLOC_END - VMALLOC_START) / PAGE_SIZE]; #define PAGE_KERNEL_LARGE __pgprot(__PAGE_KERNEL_LARGE) #define PAGE_KERNEL_LARGE_EXEC __pgprot(__PAGE_KERNEL_LARGE_EXEC) +#define __PAGE_USERIO (__PAGE_KERNEL_BASE | _PAGE_PROT_WKWU | _PAGE_NX) +#define PAGE_USERIO __pgprot(__PAGE_USERIO) + /* * Whilst the MN10300 can do page protection for execute (given separate data * and insn TLBs), we are not supporting it at the moment. Write permission, @@ -323,11 +338,7 @@ static inline int pte_exec_kernel(pte_t pte) return 1; } -/* - * Bits 0 and 1 are taken, split up the 29 bits of offset - * into this range: - */ -#define PTE_FILE_MAX_BITS 29 +#define PTE_FILE_MAX_BITS 30 #define pte_to_pgoff(pte) (pte_val(pte) >> 2) #define pgoff_to_pte(off) __pte((off) << 2 | _PAGE_FILE) @@ -373,8 +384,13 @@ static inline void ptep_mkdirty(pte_t *ptep) * Macro to mark a page protection value as "uncacheable". On processors which * do not support it, this is a no-op. */ -#define pgprot_noncached(prot) __pgprot(pgprot_val(prot) | _PAGE_CACHE) +#define pgprot_noncached(prot) __pgprot(pgprot_val(prot) & ~_PAGE_CACHE) +/* + * Macro to mark a page protection value as "Write-Through". + * On processors which do not support it, this is a no-op. + */ +#define pgprot_through(prot) __pgprot(pgprot_val(prot) | _PAGE_CACHE_WT) /* * Conversion functions: convert a page and protection to a page entry, diff --git a/arch/mn10300/include/asm/processor.h b/arch/mn10300/include/asm/processor.h index f7d4b0d285e..4c1b5cc14c1 100644 --- a/arch/mn10300/include/asm/processor.h +++ b/arch/mn10300/include/asm/processor.h @@ -13,10 +13,13 @@ #ifndef _ASM_PROCESSOR_H #define _ASM_PROCESSOR_H +#include <linux/threads.h> +#include <linux/thread_info.h> #include <asm/page.h> #include <asm/ptrace.h> #include <asm/cpu-regs.h> -#include <linux/threads.h> +#include <asm/uaccess.h> +#include <asm/current.h> /* Forward declaration, a strange C thing */ struct task_struct; @@ -33,6 +36,8 @@ struct mm_struct; __pc; \ }) +extern void get_mem_info(unsigned long *mem_base, unsigned long *mem_size); + extern void show_registers(struct pt_regs *regs); /* @@ -43,17 +48,22 @@ extern void show_registers(struct pt_regs *regs); struct mn10300_cpuinfo { int type; - unsigned long loops_per_sec; + unsigned long loops_per_jiffy; char hard_math; - unsigned long *pgd_quick; - unsigned long *pte_quick; - unsigned long pgtable_cache_sz; }; extern struct mn10300_cpuinfo boot_cpu_data; +#ifdef CONFIG_SMP +#if CONFIG_NR_CPUS < 2 || CONFIG_NR_CPUS > 8 +# error Sorry, NR_CPUS should be 2 to 8 +#endif +extern struct mn10300_cpuinfo cpu_data[]; +#define current_cpu_data cpu_data[smp_processor_id()] +#else /* CONFIG_SMP */ #define cpu_data &boot_cpu_data #define current_cpu_data boot_cpu_data +#endif /* CONFIG_SMP */ extern void identify_cpu(struct mn10300_cpuinfo *); extern void print_cpu_info(struct mn10300_cpuinfo *); @@ -76,10 +86,6 @@ extern void dodgy_tsc(void); */ #define TASK_UNMAPPED_BASE 0x30000000 -typedef struct { - unsigned long seg; -} mm_segment_t; - struct fpu_state_struct { unsigned long fs[32]; /* fpu registers */ unsigned long fpcr; /* fpu control register */ @@ -92,20 +98,19 @@ struct thread_struct { unsigned long a3; /* kernel FP */ unsigned long wchan; unsigned long usp; - struct pt_regs *__frame; unsigned long fpu_flags; #define THREAD_USING_FPU 0x00000001 /* T if this task is using the FPU */ +#define THREAD_HAS_FPU 0x00000002 /* T if this task owns the FPU right now */ struct fpu_state_struct fpu_state; }; -#define INIT_THREAD \ -{ \ - .uregs = init_uregs, \ - .pc = 0, \ - .sp = 0, \ - .a3 = 0, \ - .wchan = 0, \ - .__frame = NULL, \ +#define INIT_THREAD \ +{ \ + .uregs = init_uregs, \ + .pc = 0, \ + .sp = 0, \ + .a3 = 0, \ + .wchan = 0, \ } #define INIT_MMAP \ @@ -117,13 +122,20 @@ struct thread_struct { * - need to discard the frame stacked by the kernel thread invoking the execve * syscall (see RESTORE_ALL macro) */ -#define start_thread(regs, new_pc, new_sp) do { \ - set_fs(USER_DS); \ - __frame = current->thread.uregs; \ - __frame->epsw = EPSW_nSL | EPSW_IE | EPSW_IM; \ - __frame->pc = new_pc; \ - __frame->sp = new_sp; \ -} while (0) +static inline void start_thread(struct pt_regs *regs, + unsigned long new_pc, unsigned long new_sp) +{ + struct thread_info *ti = current_thread_info(); + struct pt_regs *frame0; + set_fs(USER_DS); + + frame0 = thread_info_to_uregs(ti); + frame0->epsw = EPSW_nSL | EPSW_IE | EPSW_IM; + frame0->pc = new_pc; + frame0->sp = new_sp; + ti->frame = frame0; +} + /* Free all resources held by a thread. */ extern void release_thread(struct task_struct *); @@ -157,7 +169,7 @@ unsigned long get_wchan(struct task_struct *p); static inline void prefetch(const void *x) { -#ifndef CONFIG_MN10300_CACHE_DISABLED +#ifdef CONFIG_MN10300_CACHE_ENABLED #ifdef CONFIG_MN10300_PROC_MN103E010 asm volatile ("nop; nop; dcpf (%0)" : : "r"(x)); #else @@ -168,7 +180,7 @@ static inline void prefetch(const void *x) static inline void prefetchw(const void *x) { -#ifndef CONFIG_MN10300_CACHE_DISABLED +#ifdef CONFIG_MN10300_CACHE_ENABLED #ifdef CONFIG_MN10300_PROC_MN103E010 asm volatile ("nop; nop; dcpf (%0)" : : "r"(x)); #else diff --git a/arch/mn10300/include/asm/ptrace.h b/arch/mn10300/include/asm/ptrace.h index 7c2e911052b..b6961811d44 100644 --- a/arch/mn10300/include/asm/ptrace.h +++ b/arch/mn10300/include/asm/ptrace.h @@ -40,7 +40,6 @@ #define PT_PC 26 #define NR_PTREGS 27 -#ifndef __ASSEMBLY__ /* * This defines the way registers are stored in the event of an exception * - the strange order is due to the MOVM instruction @@ -75,7 +74,6 @@ struct pt_regs { unsigned long epsw; unsigned long pc; }; -#endif /* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */ #define PTRACE_GETREGS 12 @@ -86,12 +84,7 @@ struct pt_regs { /* options set using PTRACE_SETOPTIONS */ #define PTRACE_O_TRACESYSGOOD 0x00000001 -#if defined(__KERNEL__) - -extern struct pt_regs *__frame; /* current frame pointer */ - -#if !defined(__ASSEMBLY__) -struct task_struct; +#ifdef __KERNEL__ #define user_mode(regs) (((regs)->epsw & EPSW_nSL) == EPSW_nSL) #define instruction_pointer(regs) ((regs)->pc) @@ -100,9 +93,7 @@ extern void show_regs(struct pt_regs *); #define arch_has_single_step() (1) -#endif /* !__ASSEMBLY */ - #define profile_pc(regs) ((regs)->pc) -#endif /* __KERNEL__ */ +#endif /* __KERNEL__ */ #endif /* _ASM_PTRACE_H */ diff --git a/arch/mn10300/include/asm/reset-regs.h b/arch/mn10300/include/asm/reset-regs.h index 174523d5013..10c7502a113 100644 --- a/arch/mn10300/include/asm/reset-regs.h +++ b/arch/mn10300/include/asm/reset-regs.h @@ -50,7 +50,7 @@ static inline void mn10300_proc_hard_reset(void) RSTCTR |= RSTCTR_CHIPRST; } -extern unsigned int watchdog_alert_counter; +extern unsigned int watchdog_alert_counter[]; extern void watchdog_go(void); extern asmlinkage void watchdog_handler(void); diff --git a/arch/mn10300/include/asm/rtc.h b/arch/mn10300/include/asm/rtc.h index c295194cc70..6c14bb1d0d9 100644 --- a/arch/mn10300/include/asm/rtc.h +++ b/arch/mn10300/include/asm/rtc.h @@ -15,25 +15,14 @@ #include <linux/init.h> -extern void check_rtc_time(void); extern void __init calibrate_clock(void); -extern unsigned long __init get_initial_rtc_time(void); #else /* !CONFIG_MN10300_RTC */ -static inline void check_rtc_time(void) -{ -} - static inline void calibrate_clock(void) { } -static inline unsigned long get_initial_rtc_time(void) -{ - return 0; -} - #endif /* !CONFIG_MN10300_RTC */ #include <asm-generic/rtc.h> diff --git a/arch/mn10300/include/asm/rwlock.h b/arch/mn10300/include/asm/rwlock.h new file mode 100644 index 00000000000..6d594d4a0e1 --- /dev/null +++ b/arch/mn10300/include/asm/rwlock.h @@ -0,0 +1,125 @@ +/* + * Helpers used by both rw spinlocks and rw semaphores. + * + * Based in part on code from semaphore.h and + * spinlock.h Copyright 1996 Linus Torvalds. + * + * Copyright 1999 Red Hat, Inc. + * + * Written by Benjamin LaHaise. + * + * Modified by Matsushita Electric Industrial Co., Ltd. + * Modifications: + * 13-Nov-2006 MEI Temporarily delete lock functions for SMP support. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + */ +#ifndef _ASM_RWLOCK_H +#define _ASM_RWLOCK_H + +#define RW_LOCK_BIAS 0x01000000 + +#ifndef CONFIG_SMP + +typedef struct { unsigned long a[100]; } __dummy_lock_t; +#define __dummy_lock(lock) (*(__dummy_lock_t *)(lock)) + +#define RW_LOCK_BIAS_STR "0x01000000" + +#define __build_read_lock_ptr(rw, helper) \ + do { \ + asm volatile( \ + " mov (%0),d3 \n" \ + " sub 1,d3 \n" \ + " mov d3,(%0) \n" \ + " blt 1f \n" \ + " bra 2f \n" \ + "1: jmp 3f \n" \ + "2: \n" \ + " .section .text.lock,\"ax\" \n" \ + "3: call "helper"[],0 \n" \ + " jmp 2b \n" \ + " .previous" \ + : \ + : "d" (rw) \ + : "memory", "d3", "cc"); \ + } while (0) + +#define __build_read_lock_const(rw, helper) \ + do { \ + asm volatile( \ + " mov (%0),d3 \n" \ + " sub 1,d3 \n" \ + " mov d3,(%0) \n" \ + " blt 1f \n" \ + " bra 2f \n" \ + "1: jmp 3f \n" \ + "2: \n" \ + " .section .text.lock,\"ax\" \n" \ + "3: call "helper"[],0 \n" \ + " jmp 2b \n" \ + " .previous" \ + : \ + : "d" (rw) \ + : "memory", "d3", "cc"); \ + } while (0) + +#define __build_read_lock(rw, helper) \ + do { \ + if (__builtin_constant_p(rw)) \ + __build_read_lock_const(rw, helper); \ + else \ + __build_read_lock_ptr(rw, helper); \ + } while (0) + +#define __build_write_lock_ptr(rw, helper) \ + do { \ + asm volatile( \ + " mov (%0),d3 \n" \ + " sub 1,d3 \n" \ + " mov d3,(%0) \n" \ + " blt 1f \n" \ + " bra 2f \n" \ + "1: jmp 3f \n" \ + "2: \n" \ + " .section .text.lock,\"ax\" \n" \ + "3: call "helper"[],0 \n" \ + " jmp 2b \n" \ + " .previous" \ + : \ + : "d" (rw) \ + : "memory", "d3", "cc"); \ + } while (0) + +#define __build_write_lock_const(rw, helper) \ + do { \ + asm volatile( \ + " mov (%0),d3 \n" \ + " sub 1,d3 \n" \ + " mov d3,(%0) \n" \ + " blt 1f \n" \ + " bra 2f \n" \ + "1: jmp 3f \n" \ + "2: \n" \ + " .section .text.lock,\"ax\" \n" \ + "3: call "helper"[],0 \n" \ + " jmp 2b \n" \ + " .previous" \ + : \ + : "d" (rw) \ + : "memory", "d3", "cc"); \ + } while (0) + +#define __build_write_lock(rw, helper) \ + do { \ + if (__builtin_constant_p(rw)) \ + __build_write_lock_const(rw, helper); \ + else \ + __build_write_lock_ptr(rw, helper); \ + } while (0) + +#endif /* CONFIG_SMP */ +#endif /* _ASM_RWLOCK_H */ diff --git a/arch/mn10300/include/asm/serial-regs.h b/arch/mn10300/include/asm/serial-regs.h index 6498469e93a..8320cda32f5 100644 --- a/arch/mn10300/include/asm/serial-regs.h +++ b/arch/mn10300/include/asm/serial-regs.h @@ -20,18 +20,25 @@ /* serial port 0 */ #define SC0CTR __SYSREG(0xd4002000, u16) /* control reg */ #define SC01CTR_CK 0x0007 /* clock source select */ -#define SC0CTR_CK_TM8UFLOW_8 0x0000 /* - 1/8 timer 8 underflow (serial port 0 only) */ -#define SC1CTR_CK_TM9UFLOW_8 0x0000 /* - 1/8 timer 9 underflow (serial port 1 only) */ #define SC01CTR_CK_IOCLK_8 0x0001 /* - 1/8 IOCLK */ #define SC01CTR_CK_IOCLK_32 0x0002 /* - 1/32 IOCLK */ +#define SC01CTR_CK_EXTERN_8 0x0006 /* - 1/8 external closk */ +#define SC01CTR_CK_EXTERN 0x0007 /* - external closk */ +#if defined(CONFIG_AM33_2) || defined(CONFIG_AM33_3) +#define SC0CTR_CK_TM8UFLOW_8 0x0000 /* - 1/8 timer 8 underflow (serial port 0 only) */ #define SC0CTR_CK_TM2UFLOW_2 0x0003 /* - 1/2 timer 2 underflow (serial port 0 only) */ -#define SC1CTR_CK_TM3UFLOW_2 0x0003 /* - 1/2 timer 3 underflow (serial port 1 only) */ -#define SC0CTR_CK_TM0UFLOW_8 0x0004 /* - 1/8 timer 1 underflow (serial port 0 only) */ -#define SC1CTR_CK_TM1UFLOW_8 0x0004 /* - 1/8 timer 2 underflow (serial port 1 only) */ +#define SC0CTR_CK_TM0UFLOW_8 0x0004 /* - 1/8 timer 0 underflow (serial port 0 only) */ #define SC0CTR_CK_TM2UFLOW_8 0x0005 /* - 1/8 timer 2 underflow (serial port 0 only) */ +#define SC1CTR_CK_TM9UFLOW_8 0x0000 /* - 1/8 timer 9 underflow (serial port 1 only) */ +#define SC1CTR_CK_TM3UFLOW_2 0x0003 /* - 1/2 timer 3 underflow (serial port 1 only) */ +#define SC1CTR_CK_TM1UFLOW_8 0x0004 /* - 1/8 timer 1 underflow (serial port 1 only) */ #define SC1CTR_CK_TM3UFLOW_8 0x0005 /* - 1/8 timer 3 underflow (serial port 1 only) */ -#define SC01CTR_CK_EXTERN_8 0x0006 /* - 1/8 external closk */ -#define SC01CTR_CK_EXTERN 0x0007 /* - external closk */ +#else /* CONFIG_AM33_2 || CONFIG_AM33_3 */ +#define SC0CTR_CK_TM8UFLOW_8 0x0000 /* - 1/8 timer 8 underflow (serial port 0 only) */ +#define SC0CTR_CK_TM0UFLOW_8 0x0004 /* - 1/8 timer 0 underflow (serial port 0 only) */ +#define SC0CTR_CK_TM2UFLOW_8 0x0005 /* - 1/8 timer 2 underflow (serial port 0 only) */ +#define SC1CTR_CK_TM12UFLOW_8 0x0000 /* - 1/8 timer 12 underflow (serial port 1 only) */ +#endif /* CONFIG_AM33_2 || CONFIG_AM33_3 */ #define SC01CTR_STB 0x0008 /* stop bit select */ #define SC01CTR_STB_1BIT 0x0000 /* - 1 stop bit */ #define SC01CTR_STB_2BIT 0x0008 /* - 2 stop bits */ @@ -100,11 +107,23 @@ /* serial port 2 */ #define SC2CTR __SYSREG(0xd4002020, u16) /* control reg */ +#ifdef CONFIG_AM33_2 #define SC2CTR_CK 0x0003 /* clock source select */ #define SC2CTR_CK_TM10UFLOW 0x0000 /* - timer 10 underflow */ #define SC2CTR_CK_TM2UFLOW 0x0001 /* - timer 2 underflow */ #define SC2CTR_CK_EXTERN 0x0002 /* - external closk */ #define SC2CTR_CK_TM3UFLOW 0x0003 /* - timer 3 underflow */ +#else /* CONFIG_AM33_2 */ +#define SC2CTR_CK 0x0007 /* clock source select */ +#define SC2CTR_CK_TM9UFLOW_8 0x0000 /* - 1/8 timer 9 underflow */ +#define SC2CTR_CK_IOCLK_8 0x0001 /* - 1/8 IOCLK */ +#define SC2CTR_CK_IOCLK_32 0x0002 /* - 1/32 IOCLK */ +#define SC2CTR_CK_TM3UFLOW_2 0x0003 /* - 1/2 timer 3 underflow */ +#define SC2CTR_CK_TM1UFLOW_8 0x0004 /* - 1/8 timer 1 underflow */ +#define SC2CTR_CK_TM3UFLOW_8 0x0005 /* - 1/8 timer 3 underflow */ +#define SC2CTR_CK_EXTERN_8 0x0006 /* - 1/8 external closk */ +#define SC2CTR_CK_EXTERN 0x0007 /* - external closk */ +#endif /* CONFIG_AM33_2 */ #define SC2CTR_STB 0x0008 /* stop bit select */ #define SC2CTR_STB_1BIT 0x0000 /* - 1 stop bit */ #define SC2CTR_STB_2BIT 0x0008 /* - 2 stop bits */ @@ -134,9 +153,14 @@ #define SC2ICR_RES 0x04 /* receive error select */ #define SC2ICR_RI 0x01 /* receive interrupt cause */ -#define SC2TXB __SYSREG(0xd4002018, u8) /* transmit buffer reg */ -#define SC2RXB __SYSREG(0xd4002019, u8) /* receive buffer reg */ -#define SC2STR __SYSREG(0xd400201c, u8) /* status reg */ +#define SC2TXB __SYSREG(0xd4002028, u8) /* transmit buffer reg */ +#define SC2RXB __SYSREG(0xd4002029, u8) /* receive buffer reg */ + +#ifdef CONFIG_AM33_2 +#define SC2STR __SYSREG(0xd400202c, u8) /* status reg */ +#else /* CONFIG_AM33_2 */ +#define SC2STR __SYSREG(0xd400202c, u16) /* status reg */ +#endif /* CONFIG_AM33_2 */ #define SC2STR_OEF 0x0001 /* overrun error found */ #define SC2STR_PEF 0x0002 /* parity error found */ #define SC2STR_FEF 0x0004 /* framing error found */ @@ -146,10 +170,17 @@ #define SC2STR_RXF 0x0040 /* receive status */ #define SC2STR_TXF 0x0080 /* transmit status */ +#ifdef CONFIG_AM33_2 #define SC2TIM __SYSREG(0xd400202d, u8) /* status reg */ +#endif +#ifdef CONFIG_AM33_2 #define SC2RXIRQ 24 /* serial 2 Receive IRQ */ #define SC2TXIRQ 25 /* serial 2 Transmit IRQ */ +#else /* CONFIG_AM33_2 */ +#define SC2RXIRQ 68 /* serial 2 Receive IRQ */ +#define SC2TXIRQ 69 /* serial 2 Transmit IRQ */ +#endif /* CONFIG_AM33_2 */ #define SC2RXICR GxICR(SC2RXIRQ) /* serial 2 receive intr ctrl reg */ #define SC2TXICR GxICR(SC2TXIRQ) /* serial 2 transmit intr ctrl reg */ diff --git a/arch/mn10300/include/asm/serial.h b/arch/mn10300/include/asm/serial.h index a29445cddd6..23a79929359 100644 --- a/arch/mn10300/include/asm/serial.h +++ b/arch/mn10300/include/asm/serial.h @@ -9,10 +9,8 @@ * 2 of the Licence, or (at your option) any later version. */ -/* - * The ASB2305 has an 18.432 MHz clock the UART - */ -#define BASE_BAUD (18432000 / 16) +#ifndef _ASM_SERIAL_H +#define _ASM_SERIAL_H /* Standard COM flags (except for COM4, because of the 8514 problem) */ #ifdef CONFIG_SERIAL_DETECT_IRQ @@ -34,3 +32,5 @@ #endif #include <unit/serial.h> + +#endif /* _ASM_SERIAL_H */ diff --git a/arch/mn10300/include/asm/smp.h b/arch/mn10300/include/asm/smp.h index 4eb8c61b7da..a3930e43a95 100644 --- a/arch/mn10300/include/asm/smp.h +++ b/arch/mn10300/include/asm/smp.h @@ -3,6 +3,16 @@ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. * Written by David Howells (dhowells@redhat.com) * + * Modified by Matsushita Electric Industrial Co., Ltd. + * Modifications: + * 13-Nov-2006 MEI Define IPI-IRQ number and add inline/macro function + * for SMP support. + * 22-Jan-2007 MEI Add the define related to SMP_BOOT_IRQ. + * 23-Feb-2007 MEI Add the define related to SMP icahce invalidate. + * 23-Jun-2008 MEI Delete INTC_IPI. + * 22-Jul-2008 MEI Add smp_nmi_call_function and related defines. + * 04-Aug-2008 MEI Delete USE_DOIRQ_CACHE_IPI. + * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public Licence * as published by the Free Software Foundation; either version @@ -11,8 +21,85 @@ #ifndef _ASM_SMP_H #define _ASM_SMP_H -#ifdef CONFIG_SMP -#error SMP not yet supported for MN10300 +#ifndef __ASSEMBLY__ +#include <linux/threads.h> +#include <linux/cpumask.h> #endif +#ifdef CONFIG_SMP +#include <proc/smp-regs.h> + +#define RESCHEDULE_IPI 63 +#define CALL_FUNC_SINGLE_IPI 192 +#define LOCAL_TIMER_IPI 193 +#define FLUSH_CACHE_IPI 194 +#define CALL_FUNCTION_NMI_IPI 195 +#define GDB_NMI_IPI 196 + +#define SMP_BOOT_IRQ 195 + +#define RESCHEDULE_GxICR_LV GxICR_LEVEL_6 +#define CALL_FUNCTION_GxICR_LV GxICR_LEVEL_4 +#define LOCAL_TIMER_GxICR_LV GxICR_LEVEL_4 +#define FLUSH_CACHE_GxICR_LV GxICR_LEVEL_0 +#define SMP_BOOT_GxICR_LV GxICR_LEVEL_0 + +#define TIME_OUT_COUNT_BOOT_IPI 100 +#define DELAY_TIME_BOOT_IPI 75000 + + +#ifndef __ASSEMBLY__ + +/** + * raw_smp_processor_id - Determine the raw CPU ID of the CPU running it + * + * What we really want to do is to use the CPUID hardware CPU register to get + * this information, but accesses to that aren't cached, and run at system bus + * speed, not CPU speed. A copy of this value is, however, stored in the + * thread_info struct, and that can be cached. + * + * An alternate way of dealing with this could be to use the EPSW.S bits to + * cache this information for systems with up to four CPUs. + */ +#if 0 +#define raw_smp_processor_id() (CPUID) +#else +#define raw_smp_processor_id() (current_thread_info()->cpu) #endif + +static inline int cpu_logical_map(int cpu) +{ + return cpu; +} + +static inline int cpu_number_map(int cpu) +{ + return cpu; +} + + +extern cpumask_t cpu_boot_map; + +extern void smp_init_cpus(void); +extern void smp_cache_interrupt(void); +extern void send_IPI_allbutself(int irq); +extern int smp_nmi_call_function(smp_call_func_t func, void *info, int wait); + +extern void arch_send_call_function_single_ipi(int cpu); +extern void arch_send_call_function_ipi_mask(const struct cpumask *mask); + +#ifdef CONFIG_HOTPLUG_CPU +extern int __cpu_disable(void); +extern void __cpu_die(unsigned int cpu); +#endif /* CONFIG_HOTPLUG_CPU */ + +#endif /* __ASSEMBLY__ */ +#else /* CONFIG_SMP */ +#ifndef __ASSEMBLY__ + +static inline void smp_init_cpus(void) {} + +#endif /* __ASSEMBLY__ */ +#endif /* CONFIG_SMP */ + +#endif /* _ASM_SMP_H */ diff --git a/arch/mn10300/include/asm/smsc911x.h b/arch/mn10300/include/asm/smsc911x.h new file mode 100644 index 00000000000..2fcd1080322 --- /dev/null +++ b/arch/mn10300/include/asm/smsc911x.h @@ -0,0 +1 @@ +#include <unit/smsc911x.h> diff --git a/arch/mn10300/include/asm/spinlock.h b/arch/mn10300/include/asm/spinlock.h index 4bf9c8b169e..93429154e89 100644 --- a/arch/mn10300/include/asm/spinlock.h +++ b/arch/mn10300/include/asm/spinlock.h @@ -11,6 +11,183 @@ #ifndef _ASM_SPINLOCK_H #define _ASM_SPINLOCK_H -#error SMP spinlocks not implemented for MN10300 +#include <asm/atomic.h> +#include <asm/rwlock.h> +#include <asm/page.h> +/* + * Simple spin lock operations. There are two variants, one clears IRQ's + * on the local processor, one does not. + * + * We make no fairness assumptions. They have a cost. + */ + +#define arch_spin_is_locked(x) (*(volatile signed char *)(&(x)->slock) != 0) +#define arch_spin_unlock_wait(x) do { barrier(); } while (arch_spin_is_locked(x)) + +static inline void arch_spin_unlock(arch_spinlock_t *lock) +{ + asm volatile( + " bclr 1,(0,%0) \n" + : + : "a"(&lock->slock) + : "memory", "cc"); +} + +static inline int arch_spin_trylock(arch_spinlock_t *lock) +{ + int ret; + + asm volatile( + " mov 1,%0 \n" + " bset %0,(%1) \n" + " bne 1f \n" + " clr %0 \n" + "1: xor 1,%0 \n" + : "=d"(ret) + : "a"(&lock->slock) + : "memory", "cc"); + + return ret; +} + +static inline void arch_spin_lock(arch_spinlock_t *lock) +{ + asm volatile( + "1: bset 1,(0,%0) \n" + " bne 1b \n" + : + : "a"(&lock->slock) + : "memory", "cc"); +} + +static inline void arch_spin_lock_flags(arch_spinlock_t *lock, + unsigned long flags) +{ + int temp; + + asm volatile( + "1: bset 1,(0,%2) \n" + " beq 3f \n" + " mov %1,epsw \n" + "2: mov (0,%2),%0 \n" + " or %0,%0 \n" + " bne 2b \n" + " mov %3,%0 \n" + " mov %0,epsw \n" + " nop \n" + " nop \n" + " bra 1b\n" + "3: \n" + : "=&d" (temp) + : "d" (flags), "a"(&lock->slock), "i"(EPSW_IE | MN10300_CLI_LEVEL) + : "memory", "cc"); +} + +#ifdef __KERNEL__ + +/* + * Read-write spinlocks, allowing multiple readers + * but only one writer. + * + * NOTE! it is quite common to have readers in interrupts + * but no interrupt writers. For those circumstances we + * can "mix" irq-safe locks - any writer needs to get a + * irq-safe write-lock, but readers can get non-irqsafe + * read-locks. + */ + +/** + * read_can_lock - would read_trylock() succeed? + * @lock: the rwlock in question. + */ +#define arch_read_can_lock(x) ((int)(x)->lock > 0) + +/** + * write_can_lock - would write_trylock() succeed? + * @lock: the rwlock in question. + */ +#define arch_write_can_lock(x) ((x)->lock == RW_LOCK_BIAS) + +/* + * On mn10300, we implement read-write locks as a 32-bit counter + * with the high bit (sign) being the "contended" bit. + */ +static inline void arch_read_lock(arch_rwlock_t *rw) +{ +#if 0 //def CONFIG_MN10300_HAS_ATOMIC_OPS_UNIT + __build_read_lock(rw, "__read_lock_failed"); +#else + { + atomic_t *count = (atomic_t *)rw; + while (atomic_dec_return(count) < 0) + atomic_inc(count); + } +#endif +} + +static inline void arch_write_lock(arch_rwlock_t *rw) +{ +#if 0 //def CONFIG_MN10300_HAS_ATOMIC_OPS_UNIT + __build_write_lock(rw, "__write_lock_failed"); +#else + { + atomic_t *count = (atomic_t *)rw; + while (!atomic_sub_and_test(RW_LOCK_BIAS, count)) + atomic_add(RW_LOCK_BIAS, count); + } +#endif +} + +static inline void arch_read_unlock(arch_rwlock_t *rw) +{ +#if 0 //def CONFIG_MN10300_HAS_ATOMIC_OPS_UNIT + __build_read_unlock(rw); +#else + { + atomic_t *count = (atomic_t *)rw; + atomic_inc(count); + } +#endif +} + +static inline void arch_write_unlock(arch_rwlock_t *rw) +{ +#if 0 //def CONFIG_MN10300_HAS_ATOMIC_OPS_UNIT + __build_write_unlock(rw); +#else + { + atomic_t *count = (atomic_t *)rw; + atomic_add(RW_LOCK_BIAS, count); + } +#endif +} + +static inline int arch_read_trylock(arch_rwlock_t *lock) +{ + atomic_t *count = (atomic_t *)lock; + atomic_dec(count); + if (atomic_read(count) >= 0) + return 1; + atomic_inc(count); + return 0; +} + +static inline int arch_write_trylock(arch_rwlock_t *lock) +{ + atomic_t *count = (atomic_t *)lock; + if (atomic_sub_and_test(RW_LOCK_BIAS, count)) + return 1; + atomic_add(RW_LOCK_BIAS, count); + return 0; +} + +#define arch_read_lock_flags(lock, flags) arch_read_lock(lock) +#define arch_write_lock_flags(lock, flags) arch_write_lock(lock) + +#define _raw_spin_relax(lock) cpu_relax() +#define _raw_read_relax(lock) cpu_relax() +#define _raw_write_relax(lock) cpu_relax() + +#endif /* __KERNEL__ */ #endif /* _ASM_SPINLOCK_H */ diff --git a/arch/mn10300/include/asm/spinlock_types.h b/arch/mn10300/include/asm/spinlock_types.h new file mode 100644 index 00000000000..653dc519b40 --- /dev/null +++ b/arch/mn10300/include/asm/spinlock_types.h @@ -0,0 +1,20 @@ +#ifndef _ASM_SPINLOCK_TYPES_H +#define _ASM_SPINLOCK_TYPES_H + +#ifndef __LINUX_SPINLOCK_TYPES_H +# error "please don't include this file directly" +#endif + +typedef struct arch_spinlock { + unsigned int slock; +} arch_spinlock_t; + +#define __ARCH_SPIN_LOCK_UNLOCKED { 0 } + +typedef struct { + unsigned int lock; +} arch_rwlock_t; + +#define __ARCH_RW_LOCK_UNLOCKED { RW_LOCK_BIAS } + +#endif /* _ASM_SPINLOCK_TYPES_H */ diff --git a/arch/mn10300/include/asm/system.h b/arch/mn10300/include/asm/system.h index 9f7c7e17c01..8ff3e5aaca4 100644 --- a/arch/mn10300/include/asm/system.h +++ b/arch/mn10300/include/asm/system.h @@ -12,12 +12,29 @@ #define _ASM_SYSTEM_H #include <asm/cpu-regs.h> +#include <asm/intctl-regs.h> #ifdef __KERNEL__ #ifndef __ASSEMBLY__ #include <linux/kernel.h> #include <linux/irqflags.h> +#include <asm/atomic.h> + +#if !defined(CONFIG_LAZY_SAVE_FPU) +struct fpu_state_struct; +extern asmlinkage void fpu_save(struct fpu_state_struct *); +#define switch_fpu(prev, next) \ + do { \ + if ((prev)->thread.fpu_flags & THREAD_HAS_FPU) { \ + (prev)->thread.fpu_flags &= ~THREAD_HAS_FPU; \ + (prev)->thread.uregs->epsw &= ~EPSW_FE; \ + fpu_save(&(prev)->thread.fpu_state); \ + } \ + } while (0) +#else +#define switch_fpu(prev, next) do {} while (0) +#endif struct task_struct; struct thread_struct; @@ -30,6 +47,7 @@ struct task_struct *__switch_to(struct thread_struct *prev, /* context switching is now performed out-of-line in switch_to.S */ #define switch_to(prev, next, last) \ do { \ + switch_fpu(prev, next); \ current->thread.wchan = (u_long) __builtin_return_address(0); \ (last) = __switch_to(&(prev)->thread, &(next)->thread, (prev)); \ mb(); \ @@ -40,8 +58,6 @@ do { \ #define nop() asm volatile ("nop") -#endif /* !__ASSEMBLY__ */ - /* * Force strict CPU ordering. * And yes, this is required on UP too when we're talking @@ -68,64 +84,19 @@ do { \ #define smp_mb() mb() #define smp_rmb() rmb() #define smp_wmb() wmb() -#else +#define set_mb(var, value) do { xchg(&var, value); } while (0) +#else /* CONFIG_SMP */ #define smp_mb() barrier() #define smp_rmb() barrier() #define smp_wmb() barrier() -#endif - #define set_mb(var, value) do { var = value; mb(); } while (0) +#endif /* CONFIG_SMP */ + #define set_wmb(var, value) do { var = value; wmb(); } while (0) #define read_barrier_depends() do {} while (0) #define smp_read_barrier_depends() do {} while (0) -/*****************************************************************************/ -/* - * MN10300 doesn't actually have an exchange instruction - */ -#ifndef __ASSEMBLY__ - -struct __xchg_dummy { unsigned long a[100]; }; -#define __xg(x) ((struct __xchg_dummy *)(x)) - -static inline -unsigned long __xchg(volatile unsigned long *m, unsigned long val) -{ - unsigned long retval; - unsigned long flags; - - local_irq_save(flags); - retval = *m; - *m = val; - local_irq_restore(flags); - return retval; -} - -#define xchg(ptr, v) \ - ((__typeof__(*(ptr))) __xchg((unsigned long *)(ptr), \ - (unsigned long)(v))) - -static inline unsigned long __cmpxchg(volatile unsigned long *m, - unsigned long old, unsigned long new) -{ - unsigned long retval; - unsigned long flags; - - local_irq_save(flags); - retval = *m; - if (retval == old) - *m = new; - local_irq_restore(flags); - return retval; -} - -#define cmpxchg(ptr, o, n) \ - ((__typeof__(*(ptr))) __cmpxchg((unsigned long *)(ptr), \ - (unsigned long)(o), \ - (unsigned long)(n))) - #endif /* !__ASSEMBLY__ */ - #endif /* __KERNEL__ */ #endif /* _ASM_SYSTEM_H */ diff --git a/arch/mn10300/include/asm/thread_info.h b/arch/mn10300/include/asm/thread_info.h index 2001cb657a9..aa07a4a5d79 100644 --- a/arch/mn10300/include/asm/thread_info.h +++ b/arch/mn10300/include/asm/thread_info.h @@ -16,10 +16,6 @@ #include <asm/page.h> -#ifndef __ASSEMBLY__ -#include <asm/processor.h> -#endif - #define PREEMPT_ACTIVE 0x10000000 #ifdef CONFIG_4KSTACKS @@ -38,10 +34,14 @@ * must also be changed */ #ifndef __ASSEMBLY__ +typedef struct { + unsigned long seg; +} mm_segment_t; struct thread_info { struct task_struct *task; /* main task structure */ struct exec_domain *exec_domain; /* execution domain */ + struct pt_regs *frame; /* current exception frame */ unsigned long flags; /* low level flags */ __u32 cpu; /* current CPU */ __s32 preempt_count; /* 0 => preemptable, <0 => BUG */ @@ -55,6 +55,10 @@ struct thread_info { __u8 supervisor_stack[0]; }; +#define thread_info_to_uregs(ti) \ + ((struct pt_regs *) \ + ((unsigned long)ti + THREAD_SIZE - sizeof(struct pt_regs))) + #else /* !__ASSEMBLY__ */ #ifndef __ASM_OFFSETS_H__ @@ -102,6 +106,12 @@ struct thread_info *current_thread_info(void) return ti; } +static inline __attribute__((const)) +struct pt_regs *current_frame(void) +{ + return current_thread_info()->frame; +} + /* how to get the current stack pointer from C */ static inline unsigned long current_stack_pointer(void) { diff --git a/arch/mn10300/include/asm/timer-regs.h b/arch/mn10300/include/asm/timer-regs.h index 1d883b7f94a..c634977caf6 100644 --- a/arch/mn10300/include/asm/timer-regs.h +++ b/arch/mn10300/include/asm/timer-regs.h @@ -17,21 +17,27 @@ #ifdef __KERNEL__ -/* timer prescalar control */ +/* + * Timer prescalar control + */ #define TMPSCNT __SYSREG(0xd4003071, u8) /* timer prescaler control */ #define TMPSCNT_ENABLE 0x80 /* timer prescaler enable */ #define TMPSCNT_DISABLE 0x00 /* timer prescaler disable */ -/* 8 bit timers */ +/* + * 8-bit timers + */ #define TM0MD __SYSREG(0xd4003000, u8) /* timer 0 mode register */ #define TM0MD_SRC 0x07 /* timer source */ #define TM0MD_SRC_IOCLK 0x00 /* - IOCLK */ #define TM0MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */ #define TM0MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */ -#define TM0MD_SRC_TM2IO 0x03 /* - TM2IO pin input */ #define TM0MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */ #define TM0MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */ +#if defined(CONFIG_AM33_2) +#define TM0MD_SRC_TM2IO 0x03 /* - TM2IO pin input */ #define TM0MD_SRC_TM0IO 0x07 /* - TM0IO pin input */ +#endif /* CONFIG_AM33_2 */ #define TM0MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ #define TM0MD_COUNT_ENABLE 0x80 /* timer count enable */ @@ -43,7 +49,9 @@ #define TM1MD_SRC_TM0CASCADE 0x03 /* - cascade with timer 0 */ #define TM1MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */ #define TM1MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */ +#if defined(CONFIG_AM33_2) #define TM1MD_SRC_TM1IO 0x07 /* - TM1IO pin input */ +#endif /* CONFIG_AM33_2 */ #define TM1MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ #define TM1MD_COUNT_ENABLE 0x80 /* timer count enable */ @@ -55,7 +63,9 @@ #define TM2MD_SRC_TM1CASCADE 0x03 /* - cascade with timer 1 */ #define TM2MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */ #define TM2MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */ +#if defined(CONFIG_AM33_2) #define TM2MD_SRC_TM2IO 0x07 /* - TM2IO pin input */ +#endif /* CONFIG_AM33_2 */ #define TM2MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ #define TM2MD_COUNT_ENABLE 0x80 /* timer count enable */ @@ -64,11 +74,13 @@ #define TM3MD_SRC_IOCLK 0x00 /* - IOCLK */ #define TM3MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */ #define TM3MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */ -#define TM3MD_SRC_TM1CASCADE 0x03 /* - cascade with timer 2 */ +#define TM3MD_SRC_TM2CASCADE 0x03 /* - cascade with timer 2 */ #define TM3MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */ #define TM3MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */ #define TM3MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */ +#if defined(CONFIG_AM33_2) #define TM3MD_SRC_TM3IO 0x07 /* - TM3IO pin input */ +#endif /* CONFIG_AM33_2 */ #define TM3MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ #define TM3MD_COUNT_ENABLE 0x80 /* timer count enable */ @@ -96,7 +108,9 @@ #define TM2ICR GxICR(TM2IRQ) /* timer 2 uflow intr ctrl reg */ #define TM3ICR GxICR(TM3IRQ) /* timer 3 uflow intr ctrl reg */ -/* 16-bit timers 4,5 & 7-11 */ +/* + * 16-bit timers 4,5 & 7-15 + */ #define TM4MD __SYSREG(0xd4003080, u8) /* timer 4 mode register */ #define TM4MD_SRC 0x07 /* timer source */ #define TM4MD_SRC_IOCLK 0x00 /* - IOCLK */ @@ -105,7 +119,9 @@ #define TM4MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */ #define TM4MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */ #define TM4MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */ +#if defined(CONFIG_AM33_2) #define TM4MD_SRC_TM4IO 0x07 /* - TM4IO pin input */ +#endif /* CONFIG_AM33_2 */ #define TM4MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ #define TM4MD_COUNT_ENABLE 0x80 /* timer count enable */ @@ -118,7 +134,11 @@ #define TM5MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */ #define TM5MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */ #define TM5MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */ +#if defined(CONFIG_AM33_2) #define TM5MD_SRC_TM5IO 0x07 /* - TM5IO pin input */ +#else /* !CONFIG_AM33_2 */ +#define TM5MD_SRC_TM7UFLOW 0x07 /* - timer 7 underflow */ +#endif /* CONFIG_AM33_2 */ #define TM5MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ #define TM5MD_COUNT_ENABLE 0x80 /* timer count enable */ @@ -130,7 +150,9 @@ #define TM7MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */ #define TM7MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */ #define TM7MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */ +#if defined(CONFIG_AM33_2) #define TM7MD_SRC_TM7IO 0x07 /* - TM7IO pin input */ +#endif /* CONFIG_AM33_2 */ #define TM7MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ #define TM7MD_COUNT_ENABLE 0x80 /* timer count enable */ @@ -143,7 +165,11 @@ #define TM8MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */ #define TM8MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */ #define TM8MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */ +#if defined(CONFIG_AM33_2) #define TM8MD_SRC_TM8IO 0x07 /* - TM8IO pin input */ +#else /* !CONFIG_AM33_2 */ +#define TM8MD_SRC_TM7UFLOW 0x07 /* - timer 7 underflow */ +#endif /* CONFIG_AM33_2 */ #define TM8MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ #define TM8MD_COUNT_ENABLE 0x80 /* timer count enable */ @@ -156,7 +182,11 @@ #define TM9MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */ #define TM9MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */ #define TM9MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */ +#if defined(CONFIG_AM33_2) #define TM9MD_SRC_TM9IO 0x07 /* - TM9IO pin input */ +#else /* !CONFIG_AM33_2 */ +#define TM9MD_SRC_TM7UFLOW 0x07 /* - timer 7 underflow */ +#endif /* CONFIG_AM33_2 */ #define TM9MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ #define TM9MD_COUNT_ENABLE 0x80 /* timer count enable */ @@ -169,7 +199,11 @@ #define TM10MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */ #define TM10MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */ #define TM10MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */ +#if defined(CONFIG_AM33_2) #define TM10MD_SRC_TM10IO 0x07 /* - TM10IO pin input */ +#else /* !CONFIG_AM33_2 */ +#define TM10MD_SRC_TM7UFLOW 0x07 /* - timer 7 underflow */ +#endif /* CONFIG_AM33_2 */ #define TM10MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ #define TM10MD_COUNT_ENABLE 0x80 /* timer count enable */ @@ -178,32 +212,101 @@ #define TM11MD_SRC_IOCLK 0x00 /* - IOCLK */ #define TM11MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */ #define TM11MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */ -#define TM11MD_SRC_TM7CASCADE 0x03 /* - cascade with timer 7 */ #define TM11MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */ #define TM11MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */ #define TM11MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */ +#if defined(CONFIG_AM33_2) #define TM11MD_SRC_TM11IO 0x07 /* - TM11IO pin input */ +#else /* !CONFIG_AM33_2 */ +#define TM11MD_SRC_TM7UFLOW 0x07 /* - timer 7 underflow */ +#endif /* CONFIG_AM33_2 */ #define TM11MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ #define TM11MD_COUNT_ENABLE 0x80 /* timer count enable */ +#if defined(CONFIG_AM34_2) +#define TM12MD __SYSREG(0xd4003180, u8) /* timer 11 mode register */ +#define TM12MD_SRC 0x07 /* timer source */ +#define TM12MD_SRC_IOCLK 0x00 /* - IOCLK */ +#define TM12MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */ +#define TM12MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */ +#define TM12MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */ +#define TM12MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */ +#define TM12MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */ +#define TM12MD_SRC_TM7UFLOW 0x07 /* - timer 7 underflow */ +#define TM12MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ +#define TM12MD_COUNT_ENABLE 0x80 /* timer count enable */ + +#define TM13MD __SYSREG(0xd4003182, u8) /* timer 11 mode register */ +#define TM13MD_SRC 0x07 /* timer source */ +#define TM13MD_SRC_IOCLK 0x00 /* - IOCLK */ +#define TM13MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */ +#define TM13MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */ +#define TM13MD_SRC_TM12CASCADE 0x03 /* - cascade with timer 12 */ +#define TM13MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */ +#define TM13MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */ +#define TM13MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */ +#define TM13MD_SRC_TM7UFLOW 0x07 /* - timer 7 underflow */ +#define TM13MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ +#define TM13MD_COUNT_ENABLE 0x80 /* timer count enable */ + +#define TM14MD __SYSREG(0xd4003184, u8) /* timer 11 mode register */ +#define TM14MD_SRC 0x07 /* timer source */ +#define TM14MD_SRC_IOCLK 0x00 /* - IOCLK */ +#define TM14MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */ +#define TM14MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */ +#define TM14MD_SRC_TM13CASCADE 0x03 /* - cascade with timer 13 */ +#define TM14MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */ +#define TM14MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */ +#define TM14MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */ +#define TM14MD_SRC_TM7UFLOW 0x07 /* - timer 7 underflow */ +#define TM14MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ +#define TM14MD_COUNT_ENABLE 0x80 /* timer count enable */ + +#define TM15MD __SYSREG(0xd4003186, u8) /* timer 11 mode register */ +#define TM15MD_SRC 0x07 /* timer source */ +#define TM15MD_SRC_IOCLK 0x00 /* - IOCLK */ +#define TM15MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */ +#define TM15MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */ +#define TM15MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */ +#define TM15MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */ +#define TM15MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */ +#define TM15MD_SRC_TM7UFLOW 0x07 /* - timer 7 underflow */ +#define TM15MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */ +#define TM15MD_COUNT_ENABLE 0x80 /* timer count enable */ +#endif /* CONFIG_AM34_2 */ + + #define TM4BR __SYSREG(0xd4003090, u16) /* timer 4 base register */ #define TM5BR __SYSREG(0xd4003092, u16) /* timer 5 base register */ +#define TM45BR __SYSREG(0xd4003090, u32) /* timer 4:5 base register */ #define TM7BR __SYSREG(0xd4003096, u16) /* timer 7 base register */ #define TM8BR __SYSREG(0xd4003098, u16) /* timer 8 base register */ #define TM9BR __SYSREG(0xd400309a, u16) /* timer 9 base register */ +#define TM89BR __SYSREG(0xd4003098, u32) /* timer 8:9 base register */ #define TM10BR __SYSREG(0xd400309c, u16) /* timer 10 base register */ #define TM11BR __SYSREG(0xd400309e, u16) /* timer 11 base register */ -#define TM45BR __SYSREG(0xd4003090, u32) /* timer 4:5 base register */ +#if defined(CONFIG_AM34_2) +#define TM12BR __SYSREG(0xd4003190, u16) /* timer 12 base register */ +#define TM13BR __SYSREG(0xd4003192, u16) /* timer 13 base register */ +#define TM14BR __SYSREG(0xd4003194, u16) /* timer 14 base register */ +#define TM15BR __SYSREG(0xd4003196, u16) /* timer 15 base register */ +#endif /* CONFIG_AM34_2 */ #define TM4BC __SYSREG(0xd40030a0, u16) /* timer 4 binary counter */ #define TM5BC __SYSREG(0xd40030a2, u16) /* timer 5 binary counter */ #define TM45BC __SYSREG(0xd40030a0, u32) /* timer 4:5 binary counter */ - #define TM7BC __SYSREG(0xd40030a6, u16) /* timer 7 binary counter */ #define TM8BC __SYSREG(0xd40030a8, u16) /* timer 8 binary counter */ #define TM9BC __SYSREG(0xd40030aa, u16) /* timer 9 binary counter */ +#define TM89BC __SYSREG(0xd40030a8, u32) /* timer 8:9 binary counter */ #define TM10BC __SYSREG(0xd40030ac, u16) /* timer 10 binary counter */ #define TM11BC __SYSREG(0xd40030ae, u16) /* timer 11 binary counter */ +#if defined(CONFIG_AM34_2) +#define TM12BC __SYSREG(0xd40031a0, u16) /* timer 12 binary counter */ +#define TM13BC __SYSREG(0xd40031a2, u16) /* timer 13 binary counter */ +#define TM14BC __SYSREG(0xd40031a4, u16) /* timer 14 binary counter */ +#define TM15BC __SYSREG(0xd40031a6, u16) /* timer 15 binary counter */ +#endif /* CONFIG_AM34_2 */ #define TM4IRQ 6 /* timer 4 IRQ */ #define TM5IRQ 7 /* timer 5 IRQ */ @@ -212,6 +315,12 @@ #define TM9IRQ 13 /* timer 9 IRQ */ #define TM10IRQ 14 /* timer 10 IRQ */ #define TM11IRQ 15 /* timer 11 IRQ */ +#if defined(CONFIG_AM34_2) +#define TM12IRQ 64 /* timer 12 IRQ */ +#define TM13IRQ 65 /* timer 13 IRQ */ +#define TM14IRQ 66 /* timer 14 IRQ */ +#define TM15IRQ 67 /* timer 15 IRQ */ +#endif /* CONFIG_AM34_2 */ #define TM4ICR GxICR(TM4IRQ) /* timer 4 uflow intr ctrl reg */ #define TM5ICR GxICR(TM5IRQ) /* timer 5 uflow intr ctrl reg */ @@ -220,8 +329,16 @@ #define TM9ICR GxICR(TM9IRQ) /* timer 9 uflow intr ctrl reg */ #define TM10ICR GxICR(TM10IRQ) /* timer 10 uflow intr ctrl reg */ #define TM11ICR GxICR(TM11IRQ) /* timer 11 uflow intr ctrl reg */ - -/* 16-bit timer 6 */ +#if defined(CONFIG_AM34_2) +#define TM12ICR GxICR(TM12IRQ) /* timer 12 uflow intr ctrl reg */ +#define TM13ICR GxICR(TM13IRQ) /* timer 13 uflow intr ctrl reg */ +#define TM14ICR GxICR(TM14IRQ) /* timer 14 uflow intr ctrl reg */ +#define TM15ICR GxICR(TM15IRQ) /* timer 15 uflow intr ctrl reg */ +#endif /* CONFIG_AM34_2 */ + +/* + * 16-bit timer 6 + */ #define TM6MD __SYSREG(0xd4003084, u16) /* timer6 mode register */ #define TM6MD_SRC 0x0007 /* timer source */ #define TM6MD_SRC_IOCLK 0x0000 /* - IOCLK */ @@ -229,10 +346,14 @@ #define TM6MD_SRC_IOCLK_32 0x0002 /* - 1/32 IOCLK */ #define TM6MD_SRC_TM0UFLOW 0x0004 /* - timer 0 underflow */ #define TM6MD_SRC_TM1UFLOW 0x0005 /* - timer 1 underflow */ -#define TM6MD_SRC_TM6IOB_BOTH 0x0006 /* - TM6IOB pin input (both edges) */ +#define TM6MD_SRC_TM2UFLOW 0x0006 /* - timer 2 underflow */ +#if defined(CONFIG_AM33_2) +/* #define TM6MD_SRC_TM6IOB_BOTH 0x0006 */ /* - TM6IOB pin input (both edges) */ #define TM6MD_SRC_TM6IOB_SINGLE 0x0007 /* - TM6IOB pin input (single edge) */ -#define TM6MD_CLR_ENABLE 0x0010 /* clear count enable */ +#endif /* CONFIG_AM33_2 */ #define TM6MD_ONESHOT_ENABLE 0x0040 /* oneshot count */ +#define TM6MD_CLR_ENABLE 0x0010 /* clear count enable */ +#if defined(CONFIG_AM33_2) #define TM6MD_TRIG_ENABLE 0x0080 /* TM6IOB pin trigger enable */ #define TM6MD_PWM 0x3800 /* PWM output mode */ #define TM6MD_PWM_DIS 0x0000 /* - disabled */ @@ -240,10 +361,15 @@ #define TM6MD_PWM_11BIT 0x1800 /* - 11 bits mode */ #define TM6MD_PWM_12BIT 0x3000 /* - 12 bits mode */ #define TM6MD_PWM_14BIT 0x3800 /* - 14 bits mode */ +#endif /* CONFIG_AM33_2 */ + #define TM6MD_INIT_COUNTER 0x4000 /* initialize TMnBC to zero */ #define TM6MD_COUNT_ENABLE 0x8000 /* timer count enable */ #define TM6MDA __SYSREG(0xd40030b4, u8) /* timer6 cmp/cap A mode reg */ +#define TM6MDA_MODE_CMP_SINGLE 0x00 /* - compare, single buffer mode */ +#define TM6MDA_MODE_CMP_DOUBLE 0x40 /* - compare, double buffer mode */ +#if defined(CONFIG_AM33_2) #define TM6MDA_OUT 0x07 /* output select */ #define TM6MDA_OUT_SETA_RESETB 0x00 /* - set at match A, reset at match B */ #define TM6MDA_OUT_SETA_RESETOV 0x01 /* - set at match A, reset at overflow */ @@ -251,30 +377,35 @@ #define TM6MDA_OUT_RESETA 0x03 /* - reset at match A */ #define TM6MDA_OUT_TOGGLE 0x04 /* - toggle on match A */ #define TM6MDA_MODE 0xc0 /* compare A register mode */ -#define TM6MDA_MODE_CMP_SINGLE 0x00 /* - compare, single buffer mode */ -#define TM6MDA_MODE_CMP_DOUBLE 0x40 /* - compare, double buffer mode */ #define TM6MDA_MODE_CAP_S_EDGE 0x80 /* - capture, single edge mode */ #define TM6MDA_MODE_CAP_D_EDGE 0xc0 /* - capture, double edge mode */ #define TM6MDA_EDGE 0x20 /* compare A edge select */ #define TM6MDA_EDGE_FALLING 0x00 /* capture on falling edge */ #define TM6MDA_EDGE_RISING 0x20 /* capture on rising edge */ #define TM6MDA_CAPTURE_ENABLE 0x10 /* capture enable */ +#else /* !CONFIG_AM33_2 */ +#define TM6MDA_MODE 0x40 /* compare A register mode */ +#endif /* CONFIG_AM33_2 */ #define TM6MDB __SYSREG(0xd40030b5, u8) /* timer6 cmp/cap B mode reg */ +#define TM6MDB_MODE_CMP_SINGLE 0x00 /* - compare, single buffer mode */ +#define TM6MDB_MODE_CMP_DOUBLE 0x40 /* - compare, double buffer mode */ +#if defined(CONFIG_AM33_2) #define TM6MDB_OUT 0x07 /* output select */ #define TM6MDB_OUT_SETB_RESETA 0x00 /* - set at match B, reset at match A */ #define TM6MDB_OUT_SETB_RESETOV 0x01 /* - set at match B */ #define TM6MDB_OUT_RESETB 0x03 /* - reset at match B */ #define TM6MDB_OUT_TOGGLE 0x04 /* - toggle on match B */ #define TM6MDB_MODE 0xc0 /* compare B register mode */ -#define TM6MDB_MODE_CMP_SINGLE 0x00 /* - compare, single buffer mode */ -#define TM6MDB_MODE_CMP_DOUBLE 0x40 /* - compare, double buffer mode */ #define TM6MDB_MODE_CAP_S_EDGE 0x80 /* - capture, single edge mode */ #define TM6MDB_MODE_CAP_D_EDGE 0xc0 /* - capture, double edge mode */ #define TM6MDB_EDGE 0x20 /* compare B edge select */ #define TM6MDB_EDGE_FALLING 0x00 /* capture on falling edge */ #define TM6MDB_EDGE_RISING 0x20 /* capture on rising edge */ #define TM6MDB_CAPTURE_ENABLE 0x10 /* capture enable */ +#else /* !CONFIG_AM33_2 */ +#define TM6MDB_MODE 0x40 /* compare B register mode */ +#endif /* CONFIG_AM33_2 */ #define TM6CA __SYSREG(0xd40030c4, u16) /* timer6 cmp/capture reg A */ #define TM6CB __SYSREG(0xd40030d4, u16) /* timer6 cmp/capture reg B */ @@ -288,6 +419,34 @@ #define TM6AICR GxICR(TM6AIRQ) /* timer 6A intr control reg */ #define TM6BICR GxICR(TM6BIRQ) /* timer 6B intr control reg */ +#if defined(CONFIG_AM34_2) +/* + * MTM: OS Tick-Timer + */ +#define TMTMD __SYSREG(0xd4004100, u8) /* Tick Timer mode register */ +#define TMTMD_TMTLDE 0x40 /* initialize TMTBC = TMTBR */ +#define TMTMD_TMTCNE 0x80 /* timer count enable */ + +#define TMTBR __SYSREG(0xd4004110, u32) /* Tick Timer mode reg */ +#define TMTBC __SYSREG(0xd4004120, u32) /* Tick Timer mode reg */ + +/* + * MTM: OS Timestamp-Timer + */ +#define TMSMD __SYSREG(0xd4004140, u8) /* Tick Timer mode register */ +#define TMSMD_TMSLDE 0x40 /* initialize TMSBC = TMSBR */ +#define TMSMD_TMSCNE 0x80 /* timer count enable */ + +#define TMSBR __SYSREG(0xd4004150, u32) /* Tick Timer mode register */ +#define TMSBC __SYSREG(0xd4004160, u32) /* Tick Timer mode register */ + +#define TMTIRQ 119 /* OS Tick timer IRQ */ +#define TMSIRQ 120 /* Timestamp timer IRQ */ + +#define TMTICR GxICR(TMTIRQ) /* OS Tick timer uflow intr ctrl reg */ +#define TMSICR GxICR(TMSIRQ) /* Timestamp timer uflow intr ctrl reg */ +#endif /* CONFIG_AM34_2 */ + #endif /* __KERNEL__ */ #endif /* _ASM_TIMER_REGS_H */ diff --git a/arch/mn10300/include/asm/timex.h b/arch/mn10300/include/asm/timex.h index 8d031f9e117..bd4e90dfe6c 100644 --- a/arch/mn10300/include/asm/timex.h +++ b/arch/mn10300/include/asm/timex.h @@ -16,18 +16,30 @@ #define TICK_SIZE (tick_nsec / 1000) -#define CLOCK_TICK_RATE 1193180 /* Underlying HZ - this should probably be set - * to something appropriate, but what? */ - -extern cycles_t cacheflush_time; +#define CLOCK_TICK_RATE MN10300_JCCLK /* Underlying HZ */ #ifdef __KERNEL__ +extern cycles_t cacheflush_time; + static inline cycles_t get_cycles(void) { return read_timestamp_counter(); } +extern int init_clockevents(void); +extern int init_clocksource(void); + +static inline void setup_jiffies_interrupt(int irq, + struct irqaction *action) +{ + u16 tmp; + setup_irq(irq, action); + set_intr_level(irq, NUM2GxICR_LEVEL(CONFIG_TIMER_IRQ_LEVEL)); + GxICR(irq) |= GxICR_ENABLE | GxICR_DETECT | GxICR_REQUEST; + tmp = GxICR(irq); +} + #endif /* __KERNEL__ */ #endif /* _ASM_TIMEX_H */ diff --git a/arch/mn10300/include/asm/tlbflush.h b/arch/mn10300/include/asm/tlbflush.h index 1a7e29281c5..efddd6e1ade 100644 --- a/arch/mn10300/include/asm/tlbflush.h +++ b/arch/mn10300/include/asm/tlbflush.h @@ -11,24 +11,78 @@ #ifndef _ASM_TLBFLUSH_H #define _ASM_TLBFLUSH_H +#include <linux/mm.h> #include <asm/processor.h> -#define __flush_tlb() \ -do { \ - int w; \ - __asm__ __volatile__ \ - (" mov %1,%0 \n" \ - " or %2,%0 \n" \ - " mov %0,%1 \n" \ - : "=d"(w) \ - : "m"(MMUCTR), "i"(MMUCTR_IIV|MMUCTR_DIV) \ - : "cc", "memory" \ - ); \ -} while (0) +struct tlb_state { + struct mm_struct *active_mm; + int state; +}; +DECLARE_PER_CPU_SHARED_ALIGNED(struct tlb_state, cpu_tlbstate); -#define __flush_tlb_all() __flush_tlb() -#define __flush_tlb_one(addr) __flush_tlb() +/** + * local_flush_tlb - Flush the current MM's entries from the local CPU's TLBs + */ +static inline void local_flush_tlb(void) +{ + int w; + asm volatile( + " mov %1,%0 \n" + " or %2,%0 \n" + " mov %0,%1 \n" + : "=d"(w) + : "m"(MMUCTR), "i"(MMUCTR_IIV|MMUCTR_DIV) + : "cc", "memory"); +} + +/** + * local_flush_tlb_all - Flush all entries from the local CPU's TLBs + */ +static inline void local_flush_tlb_all(void) +{ + local_flush_tlb(); +} +/** + * local_flush_tlb_one - Flush one entry from the local CPU's TLBs + */ +static inline void local_flush_tlb_one(unsigned long addr) +{ + local_flush_tlb(); +} + +/** + * local_flush_tlb_page - Flush a page's entry from the local CPU's TLBs + * @mm: The MM to flush for + * @addr: The address of the target page in RAM (not its page struct) + */ +static inline +void local_flush_tlb_page(struct mm_struct *mm, unsigned long addr) +{ + unsigned long pteu, flags, cnx; + + addr &= PAGE_MASK; + + local_irq_save(flags); + + cnx = 1; +#ifdef CONFIG_MN10300_TLB_USE_PIDR + cnx = mm->context.tlbpid[smp_processor_id()]; +#endif + if (cnx) { + pteu = addr; +#ifdef CONFIG_MN10300_TLB_USE_PIDR + pteu |= cnx & xPTEU_PID; +#endif + IPTEU = pteu; + DPTEU = pteu; + if (IPTEL & xPTEL_V) + IPTEL = 0; + if (DPTEL & xPTEL_V) + DPTEL = 0; + } + local_irq_restore(flags); +} /* * TLB flushing: @@ -40,41 +94,61 @@ do { \ * - flush_tlb_range(mm, start, end) flushes a range of pages * - flush_tlb_pgtables(mm, start, end) flushes a range of page tables */ -#define flush_tlb_all() \ -do { \ - preempt_disable(); \ - __flush_tlb_all(); \ - preempt_enable(); \ -} while (0) - -#define flush_tlb_mm(mm) \ -do { \ - preempt_disable(); \ - __flush_tlb_all(); \ - preempt_enable(); \ -} while (0) - -#define flush_tlb_range(vma, start, end) \ -do { \ - unsigned long __s __attribute__((unused)) = (start); \ - unsigned long __e __attribute__((unused)) = (end); \ - preempt_disable(); \ - __flush_tlb_all(); \ - preempt_enable(); \ -} while (0) - - -#define __flush_tlb_global() flush_tlb_all() -#define flush_tlb() flush_tlb_all() -#define flush_tlb_kernel_range(start, end) \ -do { \ - unsigned long __s __attribute__((unused)) = (start); \ - unsigned long __e __attribute__((unused)) = (end); \ - flush_tlb_all(); \ -} while (0) - -extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long addr); - -#define flush_tlb_pgtables(mm, start, end) do {} while (0) +#ifdef CONFIG_SMP + +#include <asm/smp.h> + +extern void flush_tlb_all(void); +extern void flush_tlb_current_task(void); +extern void flush_tlb_mm(struct mm_struct *); +extern void flush_tlb_page(struct vm_area_struct *, unsigned long); + +#define flush_tlb() flush_tlb_current_task() + +static inline void flush_tlb_range(struct vm_area_struct *vma, + unsigned long start, unsigned long end) +{ + flush_tlb_mm(vma->vm_mm); +} + +#else /* CONFIG_SMP */ + +static inline void flush_tlb_all(void) +{ + preempt_disable(); + local_flush_tlb_all(); + preempt_enable(); +} + +static inline void flush_tlb_mm(struct mm_struct *mm) +{ + preempt_disable(); + local_flush_tlb_all(); + preempt_enable(); +} + +static inline void flush_tlb_range(struct vm_area_struct *vma, + unsigned long start, unsigned long end) +{ + preempt_disable(); + local_flush_tlb_all(); + preempt_enable(); +} + +#define flush_tlb_page(vma, addr) local_flush_tlb_page((vma)->vm_mm, addr) +#define flush_tlb() flush_tlb_all() + +#endif /* CONFIG_SMP */ + +static inline void flush_tlb_kernel_range(unsigned long start, + unsigned long end) +{ + flush_tlb_all(); +} + +static inline void flush_tlb_pgtables(struct mm_struct *mm, + unsigned long start, unsigned long end) +{ +} #endif /* _ASM_TLBFLUSH_H */ diff --git a/arch/mn10300/include/asm/uaccess.h b/arch/mn10300/include/asm/uaccess.h index 197a7af3dd8..679dee0bbd0 100644 --- a/arch/mn10300/include/asm/uaccess.h +++ b/arch/mn10300/include/asm/uaccess.h @@ -14,9 +14,8 @@ /* * User space memory access functions */ -#include <linux/sched.h> +#include <linux/thread_info.h> #include <asm/page.h> -#include <asm/pgtable.h> #include <asm/errno.h> #define VERIFY_READ 0 @@ -29,7 +28,6 @@ * * For historical reasons, these macros are grossly misnamed. */ - #define MAKE_MM_SEG(s) ((mm_segment_t) { (s) }) #define KERNEL_XDS MAKE_MM_SEG(0xBFFFFFFF) @@ -377,7 +375,7 @@ unsigned long __generic_copy_to_user_nocheck(void *to, const void *from, #if 0 -#error don't use - these macros don't increment to & from pointers +#error "don't use - these macros don't increment to & from pointers" /* Optimize just a little bit when we know the size of the move. */ #define __constant_copy_user(to, from, size) \ do { \ |