Merge git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-2.6-mn10300

* git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-2.6-mn10300: (44 commits)
  MN10300: Save frame pointer in thread_info struct rather than global var
  MN10300: Change "Matsushita" to "Panasonic".
  MN10300: Create a defconfig for the ASB2364 board
  MN10300: Update the ASB2303 defconfig
  MN10300: ASB2364: Add support for SMSC911X and SMC911X
  MN10300: ASB2364: Handle the IRQ multiplexer in the FPGA
  MN10300: Generic time support
  MN10300: Specify an ELF HWCAP flag for MN10300 Atomic Operations Unit support
  MN10300: Map userspace atomic op regs as a vmalloc page
  MN10300: And Panasonic AM34 subarch and implement SMP
  MN10300: Delete idle_timestamp from irq_cpustat_t
  MN10300: Make various interrupt priority settings configurable
  MN10300: Optimise do_csum()
  MN10300: Implement atomic ops using atomic ops unit
  MN10300: Make the FPU operate in non-lazy mode under SMP
  MN10300: SMP TLB flushing
  MN10300: Use the [ID]PTEL2 registers rather than [ID]PTEL for TLB control
  MN10300: Make the use of PIDR to mark TLB entries controllable
  MN10300: Rename __flush_tlb*() to local_flush_tlb*()
  MN10300: AM34 erratum requires MMUCTR read and write on exception entry
  ...

1 files changed, 98 insertions, 48 deletions

diff --git a/arch/mn10300/kernel/entry.S b/arch/mn10300/kernel/entry.S
index 3d394b4eefb..f00b9bafcd3 100644
--- a/arch/mn10300/kernel/entry.S
+++ b/arch/mn10300/kernel/entry.S
@@ -28,25 +28,17 @@
 #include <asm/asm-offsets.h>
 #include <asm/frame.inc>
 
+#if defined(CONFIG_SMP) && defined(CONFIG_GDBSTUB)
+#include <asm/gdb-stub.h>
+#endif /* CONFIG_SMP && CONFIG_GDBSTUB */
+
 #ifdef CONFIG_PREEMPT
-#define preempt_stop		__cli
+#define preempt_stop		LOCAL_IRQ_DISABLE
 #else
 #define preempt_stop
 #define resume_kernel		restore_all
 #endif
 
-	.macro __cli
-	and	~EPSW_IM,epsw
-	or	EPSW_IE|MN10300_CLI_LEVEL,epsw
-	nop
-	nop
-	nop
-	.endm
-	.macro __sti
-	or	EPSW_IE|EPSW_IM_7,epsw
-	.endm
-
-
 	.am33_2
 
 ###############################################################################
@@ -88,7 +80,7 @@ syscall_call:
 syscall_exit:
 	# make sure we don't miss an interrupt setting need_resched or
 	# sigpending between sampling and the rti
-	__cli
+	LOCAL_IRQ_DISABLE
 	mov	(TI_flags,a2),d2
 	btst	_TIF_ALLWORK_MASK,d2
 	bne	syscall_exit_work
@@ -105,7 +97,7 @@ restore_all:
 syscall_exit_work:
 	btst	_TIF_SYSCALL_TRACE,d2
 	beq	work_pending
-	__sti				# could let syscall_trace_exit() call
+	LOCAL_IRQ_ENABLE		# could let syscall_trace_exit() call
 					# schedule() instead
 	mov	fp,d0
 	call	syscall_trace_exit[],0	# do_syscall_trace(regs)
@@ -121,7 +113,7 @@ work_resched:
 
 	# make sure we don't miss an interrupt setting need_resched or
 	# sigpending between sampling and the rti
-	__cli
+	LOCAL_IRQ_DISABLE
 
 	# is there any work to be done other than syscall tracing?
 	mov	(TI_flags,a2),d2
@@ -168,7 +160,7 @@ ret_from_intr:
 ENTRY(resume_userspace)
 	# make sure we don't miss an interrupt setting need_resched or
 	# sigpending between sampling and the rti
-	__cli
+	LOCAL_IRQ_DISABLE
 
 	# is there any work to be done on int/exception return?
 	mov	(TI_flags,a2),d2
@@ -178,7 +170,7 @@ ENTRY(resume_userspace)
 
 #ifdef CONFIG_PREEMPT
 ENTRY(resume_kernel)
-	__cli
+	LOCAL_IRQ_DISABLE
 	mov	(TI_preempt_count,a2),d0	# non-zero preempt_count ?
 	cmp	0,d0
 	bne	restore_all
@@ -216,31 +208,6 @@ ENTRY(irq_handler)
 
 ###############################################################################
 #
-# Monitor Signal handler entry point
-#
-###############################################################################
-ENTRY(monitor_signal)
-	movbu	(0xae000001),d1
-	cmp	1,d1
-	beq	monsignal
-	ret	[],0
-
-monsignal:
-	or	EPSW_NMID,epsw
-	mov	d0,a0
-	mov	a0,sp
-	mov	(REG_EPSW,fp),d1
-	and	~EPSW_nSL,d1
-	mov	d1,(REG_EPSW,fp)
-	movm	(sp),[d2,d3,a2,a3,exreg0,exreg1,exother]
-	mov	(sp),a1
-	mov	a1,usp
-	movm	(sp),[other]
-	add	4,sp
-here:	jmp	0x8e000008-here+0x8e000008
-
-###############################################################################
-#
 # Double Fault handler entry point
 # - note that there will not be a stack, D0/A0 will hold EPSW/PC as were
 #
@@ -276,6 +243,10 @@ double_fault_loop:
 ENTRY(raw_bus_error)
 	add	-4,sp
 	mov	d0,(sp)
+#if defined(CONFIG_ERRATUM_NEED_TO_RELOAD_MMUCTR)
+	mov	(MMUCTR),d0
+	mov	d0,(MMUCTR)
+#endif
 	mov	(BCBERR),d0		# what
 	btst	BCBERR_BEMR_DMA,d0	# see if it was an external bus error
 	beq	__common_exception_aux	# it wasn't
@@ -302,11 +273,88 @@ ENTRY(nmi_handler)
 	add	-4,sp
 	mov	d0,(sp)
 	mov	(TBR),d0
+
+#ifdef CONFIG_SMP
+	add	-4,sp
+	mov	d0,(sp)			# save d0(TBR)
+	movhu	(NMIAGR),d0
+	and	NMIAGR_GN,d0
+	lsr	0x2,d0
+	cmp	CALL_FUNCTION_NMI_IPI,d0
+	bne	5f			# if not call function, jump
+
+	# function call nmi ipi
+	add	4,sp			# no need to store TBR
+	mov	GxICR_DETECT,d0		# clear NMI request
+	movbu	d0,(GxICR(CALL_FUNCTION_NMI_IPI))
+	movhu	(GxICR(CALL_FUNCTION_NMI_IPI)),d0
+	and	~EPSW_NMID,epsw		# enable NMI
+
+	mov	(sp),d0			# restore d0
+	SAVE_ALL
+	call	smp_nmi_call_function_interrupt[],0
+	RESTORE_ALL
+
+5:
+#ifdef CONFIG_GDBSTUB
+	cmp	GDB_NMI_IPI,d0
+	bne	3f			# if not gdb nmi ipi, jump
+
+	# gdb nmi ipi
+	add	4,sp			# no need to store TBR
+	mov	GxICR_DETECT,d0		# clear NMI
+	movbu	d0,(GxICR(GDB_NMI_IPI))
+	movhu	(GxICR(GDB_NMI_IPI)),d0
+	and	~EPSW_NMID,epsw		# enable NMI
+#ifdef CONFIG_MN10300_CACHE_ENABLED
+	mov	(gdbstub_nmi_opr_type),d0
+	cmp	GDBSTUB_NMI_CACHE_PURGE,d0
+	bne	4f			# if not gdb cache purge, jump
+
+	# gdb cache purge nmi ipi
+	add	-20,sp
+	mov	d1,(4,sp)
+	mov	a0,(8,sp)
+	mov	a1,(12,sp)
+	mov	mdr,d0
+	mov	d0,(16,sp)
+	call	gdbstub_local_purge_cache[],0
+	mov	0x1,d0
+	mov	(CPUID),d1
+	asl	d1,d0
+	mov	gdbstub_nmi_cpumask,a0
+	bclr	d0,(a0)
+	mov	(4,sp),d1
+	mov	(8,sp),a0
+	mov	(12,sp),a1
+	mov	(16,sp),d0
+	mov	d0,mdr
+	add	20,sp
+	mov	(sp),d0
+	add	4,sp
+	rti
+4:
+#endif /* CONFIG_MN10300_CACHE_ENABLED */
+	# gdb wait nmi ipi
+	mov     (sp),d0
+	SAVE_ALL
+	call    gdbstub_nmi_wait[],0
+	RESTORE_ALL
+3:
+#endif /* CONFIG_GDBSTUB */
+	mov     (sp),d0                 # restore TBR to d0
+	add     4,sp
+#endif /* CONFIG_SMP */
+
 	bra	__common_exception_nonmi
 
 ENTRY(__common_exception)
 	add	-4,sp
 	mov	d0,(sp)
+#if defined(CONFIG_ERRATUM_NEED_TO_RELOAD_MMUCTR)
+	mov	(MMUCTR),d0
+	mov	d0,(MMUCTR)
+#endif
 
 __common_exception_aux:
 	mov	(TBR),d0
@@ -331,15 +379,21 @@ __common_exception_nonmi:
 	mov	d0,(REG_ORIG_D0,fp)
 
 #ifdef CONFIG_GDBSTUB
+#ifdef CONFIG_SMP
+	call	gdbstub_busy_check[],0
+	and	d0,d0			# check return value
+	beq	2f
+#else  /* CONFIG_SMP */
 	btst	0x01,(gdbstub_busy)
 	beq	2f
+#endif /* CONFIG_SMP */
 	and	~EPSW_IE,epsw
 	mov	fp,d0
 	mov	a2,d1
 	call	gdbstub_exception[],0	# gdbstub itself caused an exception
 	bra	restore_all
 2:
-#endif
+#endif /* CONFIG_GDBSTUB */
 
 	mov	fp,d0			# arg 0: stacked register file
 	mov	a2,d1			# arg 1: exception number
@@ -374,11 +428,7 @@ ENTRY(set_excp_vector)
 	add	exception_table,d0
 	mov	d1,(d0)
 	mov	4,d1
-#if defined(CONFIG_MN10300_CACHE_WBACK)
-	jmp	mn10300_dcache_flush_inv_range2
-#else
 	ret	[],0
-#endif
 
 ###############################################################################
 #