mn10300: add the MN10300/AM33 architecture to the kernel

Add architecture support for the MN10300/AM33 CPUs produced by MEI to the
kernel.

This patch also adds board support for the ASB2303 with the ASB2308 daughter
board, and the ASB2305.  The only processor supported is the MN103E010, which
is an AM33v2 core plus on-chip devices.

[akpm@linux-foundation.org: nuke cvs control strings]
Signed-off-by: Masakazu Urade <urade.masakazu@jp.panasonic.com>
Signed-off-by: Koichi Yasutake <yasutake.koichi@jp.panasonic.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

1 files changed, 197 insertions, 0 deletions

diff --git a/arch/mn10300/kernel/fpu-low.S b/arch/mn10300/kernel/fpu-low.S
new file mode 100644
index 00000000000..96cfd47e68d
--- /dev/null
+++ b/arch/mn10300/kernel/fpu-low.S
@@ -0,0 +1,197 @@
+/* MN10300 Low level FPU management operations
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <asm/cpu-regs.h>
+
+###############################################################################
+#
+# void fpu_init_state(void)
+# - initialise the FPU
+#
+###############################################################################
+	.globl	fpu_init_state
+	.type	fpu_init_state,@function
+fpu_init_state:
+	mov	epsw,d0
+	or	EPSW_FE,epsw
+
+#ifdef CONFIG_MN10300_PROC_MN103E010
+	nop
+	nop
+	nop
+#endif
+	fmov	0,fs0
+	fmov	fs0,fs1
+	fmov	fs0,fs2
+	fmov	fs0,fs3
+	fmov	fs0,fs4
+	fmov	fs0,fs5
+	fmov	fs0,fs6
+	fmov	fs0,fs7
+	fmov	fs0,fs8
+	fmov	fs0,fs9
+	fmov	fs0,fs10
+	fmov	fs0,fs11
+	fmov	fs0,fs12
+	fmov	fs0,fs13
+	fmov	fs0,fs14
+	fmov	fs0,fs15
+	fmov	fs0,fs16
+	fmov	fs0,fs17
+	fmov	fs0,fs18
+	fmov	fs0,fs19
+	fmov	fs0,fs20
+	fmov	fs0,fs21
+	fmov	fs0,fs22
+	fmov	fs0,fs23
+	fmov	fs0,fs24
+	fmov	fs0,fs25
+	fmov	fs0,fs26
+	fmov	fs0,fs27
+	fmov	fs0,fs28
+	fmov	fs0,fs29
+	fmov	fs0,fs30
+	fmov	fs0,fs31
+	fmov	FPCR_INIT,fpcr
+
+#ifdef CONFIG_MN10300_PROC_MN103E010
+	nop
+	nop
+	nop
+#endif
+	mov	d0,epsw
+	ret	[],0
+
+	.size	fpu_init_state,.-fpu_init_state
+
+###############################################################################
+#
+# void fpu_save(struct fpu_state_struct *)
+# - save the fpu state
+# - note that an FPU Operational exception might occur during this process
+#
+###############################################################################
+	.globl	fpu_save
+	.type	fpu_save,@function
+fpu_save:
+	mov	epsw,d1
+	or	EPSW_FE,epsw		/* enable the FPU so we can access it */
+
+#ifdef CONFIG_MN10300_PROC_MN103E010
+	nop
+	nop
+#endif
+	mov	d0,a0
+	fmov	fs0,(a0+)
+	fmov	fs1,(a0+)
+	fmov	fs2,(a0+)
+	fmov	fs3,(a0+)
+	fmov	fs4,(a0+)
+	fmov	fs5,(a0+)
+	fmov	fs6,(a0+)
+	fmov	fs7,(a0+)
+	fmov	fs8,(a0+)
+	fmov	fs9,(a0+)
+	fmov	fs10,(a0+)
+	fmov	fs11,(a0+)
+	fmov	fs12,(a0+)
+	fmov	fs13,(a0+)
+	fmov	fs14,(a0+)
+	fmov	fs15,(a0+)
+	fmov	fs16,(a0+)
+	fmov	fs17,(a0+)
+	fmov	fs18,(a0+)
+	fmov	fs19,(a0+)
+	fmov	fs20,(a0+)
+	fmov	fs21,(a0+)
+	fmov	fs22,(a0+)
+	fmov	fs23,(a0+)
+	fmov	fs24,(a0+)
+	fmov	fs25,(a0+)
+	fmov	fs26,(a0+)
+	fmov	fs27,(a0+)
+	fmov	fs28,(a0+)
+	fmov	fs29,(a0+)
+	fmov	fs30,(a0+)
+	fmov	fs31,(a0+)
+	fmov	fpcr,d0
+	mov	d0,(a0)
+#ifdef CONFIG_MN10300_PROC_MN103E010
+	nop
+	nop
+#endif
+
+	mov	d1,epsw
+	ret	[],0
+
+	.size	fpu_save,.-fpu_save
+
+###############################################################################
+#
+# void fpu_restore(struct fpu_state_struct *)
+# - restore the fpu state
+# - note that an FPU Operational exception might occur during this process
+#
+###############################################################################
+	.globl	fpu_restore
+	.type	fpu_restore,@function
+fpu_restore:
+	mov	epsw,d1
+	or	EPSW_FE,epsw		/* enable the FPU so we can access it */
+
+#ifdef CONFIG_MN10300_PROC_MN103E010
+	nop
+	nop
+#endif
+	mov	d0,a0
+	fmov	(a0+),fs0
+	fmov	(a0+),fs1
+	fmov	(a0+),fs2
+	fmov	(a0+),fs3
+	fmov	(a0+),fs4
+	fmov	(a0+),fs5
+	fmov	(a0+),fs6
+	fmov	(a0+),fs7
+	fmov	(a0+),fs8
+	fmov	(a0+),fs9
+	fmov	(a0+),fs10
+	fmov	(a0+),fs11
+	fmov	(a0+),fs12
+	fmov	(a0+),fs13
+	fmov	(a0+),fs14
+	fmov	(a0+),fs15
+	fmov	(a0+),fs16
+	fmov	(a0+),fs17
+	fmov	(a0+),fs18
+	fmov	(a0+),fs19
+	fmov	(a0+),fs20
+	fmov	(a0+),fs21
+	fmov	(a0+),fs22
+	fmov	(a0+),fs23
+	fmov	(a0+),fs24
+	fmov	(a0+),fs25
+	fmov	(a0+),fs26
+	fmov	(a0+),fs27
+	fmov	(a0+),fs28
+	fmov	(a0+),fs29
+	fmov	(a0+),fs30
+	fmov	(a0+),fs31
+	mov	(a0),d0
+	fmov	d0,fpcr
+#ifdef CONFIG_MN10300_PROC_MN103E010
+	nop
+	nop
+	nop
+#endif
+
+	mov	d1,epsw
+	ret	[],0
+
+	.size	fpu_restore,.-fpu_restore