mn10300: add the MN10300/AM33 architecture to the kernel

Add architecture support for the MN10300/AM33 CPUs produced by MEI to the
kernel.

This patch also adds board support for the ASB2303 with the ASB2308 daughter
board, and the ASB2305.  The only processor supported is the MN103E010, which
is an AM33v2 core plus on-chip devices.

[akpm@linux-foundation.org: nuke cvs control strings]
Signed-off-by: Masakazu Urade <urade.masakazu@jp.panasonic.com>
Signed-off-by: Koichi Yasutake <yasutake.koichi@jp.panasonic.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

1 files changed, 379 insertions, 0 deletions

diff --git a/arch/mn10300/kernel/ptrace.c b/arch/mn10300/kernel/ptrace.c
new file mode 100644
index 00000000000..d6d6cdc75c5
--- /dev/null
+++ b/arch/mn10300/kernel/ptrace.c
@@ -0,0 +1,379 @@
+/* MN10300 Process tracing
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Modified by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/errno.h>
+#include <linux/ptrace.h>
+#include <linux/user.h>
+#include <asm/uaccess.h>
+#include <asm/pgtable.h>
+#include <asm/system.h>
+#include <asm/processor.h>
+#include <asm/cacheflush.h>
+#include <asm/fpu.h>
+#include <asm/asm-offsets.h>
+
+/*
+ * translate ptrace register IDs into struct pt_regs offsets
+ */
+static const u8 ptrace_regid_to_frame[] = {
+	[PT_A3 << 2]		= REG_A3,
+	[PT_A2 << 2]		= REG_A2,
+	[PT_D3 << 2]		= REG_D3,
+	[PT_D2 << 2]		= REG_D2,
+	[PT_MCVF << 2]		= REG_MCVF,
+	[PT_MCRL << 2]		= REG_MCRL,
+	[PT_MCRH << 2]		= REG_MCRH,
+	[PT_MDRQ << 2]		= REG_MDRQ,
+	[PT_E1 << 2]		= REG_E1,
+	[PT_E0 << 2]		= REG_E0,
+	[PT_E7 << 2]		= REG_E7,
+	[PT_E6 << 2]		= REG_E6,
+	[PT_E5 << 2]		= REG_E5,
+	[PT_E4 << 2]		= REG_E4,
+	[PT_E3 << 2]		= REG_E3,
+	[PT_E2 << 2]		= REG_E2,
+	[PT_SP << 2]		= REG_SP,
+	[PT_LAR << 2]		= REG_LAR,
+	[PT_LIR << 2]		= REG_LIR,
+	[PT_MDR << 2]		= REG_MDR,
+	[PT_A1 << 2]		= REG_A1,
+	[PT_A0 << 2]		= REG_A0,
+	[PT_D1 << 2]		= REG_D1,
+	[PT_D0 << 2]		= REG_D0,
+	[PT_ORIG_D0 << 2]	= REG_ORIG_D0,
+	[PT_EPSW << 2]		= REG_EPSW,
+	[PT_PC << 2]		= REG_PC,
+};
+
+static inline int get_stack_long(struct task_struct *task, int offset)
+{
+	return *(unsigned long *)
+		((unsigned long) task->thread.uregs + offset);
+}
+
+/*
+ * this routine will put a word on the processes privileged stack.
+ * the offset is how far from the base addr as stored in the TSS.
+ * this routine assumes that all the privileged stacks are in our
+ * data space.
+ */
+static inline
+int put_stack_long(struct task_struct *task, int offset, unsigned long data)
+{
+	unsigned long stack;
+
+	stack = (unsigned long) task->thread.uregs + offset;
+	*(unsigned long *) stack = data;
+	return 0;
+}
+
+static inline unsigned long get_fpregs(struct fpu_state_struct *buf,
+				       struct task_struct *tsk)
+{
+	return __copy_to_user(buf, &tsk->thread.fpu_state,
+			      sizeof(struct fpu_state_struct));
+}
+
+static inline unsigned long set_fpregs(struct task_struct *tsk,
+				       struct fpu_state_struct *buf)
+{
+	return __copy_from_user(&tsk->thread.fpu_state, buf,
+				sizeof(struct fpu_state_struct));
+}
+
+static inline void fpsave_init(struct task_struct *task)
+{
+	memset(&task->thread.fpu_state, 0, sizeof(struct fpu_state_struct));
+}
+
+/*
+ * make sure the single step bit is not set
+ */
+void ptrace_disable(struct task_struct *child)
+{
+#ifndef CONFIG_MN10300_USING_JTAG
+	struct user *dummy = NULL;
+	long tmp;
+
+	tmp = get_stack_long(child, (unsigned long) &dummy->regs.epsw);
+	tmp &= ~EPSW_T;
+	put_stack_long(child, (unsigned long) &dummy->regs.epsw, tmp);
+#endif
+}
+
+/*
+ * set the single step bit
+ */
+void ptrace_enable(struct task_struct *child)
+{
+#ifndef CONFIG_MN10300_USING_JTAG
+	struct user *dummy = NULL;
+	long tmp;
+
+	tmp = get_stack_long(child, (unsigned long) &dummy->regs.epsw);
+	tmp |= EPSW_T;
+	put_stack_long(child, (unsigned long) &dummy->regs.epsw, tmp);
+#endif
+}
+
+/*
+ * handle the arch-specific side of process tracing
+ */
+long arch_ptrace(struct task_struct *child, long request, long addr, long data)
+{
+	struct fpu_state_struct fpu_state;
+	int i, ret;
+
+	switch (request) {
+	/* read the word at location addr. */
+	case PTRACE_PEEKTEXT: {
+		unsigned long tmp;
+		int copied;
+
+		copied = access_process_vm(child, addr, &tmp, sizeof(tmp), 0);
+		ret = -EIO;
+		if (copied != sizeof(tmp))
+			break;
+		ret = put_user(tmp, (unsigned long *) data);
+		break;
+	}
+
+	/* read the word at location addr. */
+	case PTRACE_PEEKDATA: {
+		unsigned long tmp;
+		int copied;
+
+		copied = access_process_vm(child, addr, &tmp, sizeof(tmp), 0);
+		ret = -EIO;
+		if (copied != sizeof(tmp))
+			break;
+		ret = put_user(tmp, (unsigned long *) data);
+		break;
+	}
+
+	/* read the word at location addr in the USER area. */
+	case PTRACE_PEEKUSR: {
+		unsigned long tmp;
+
+		ret = -EIO;
+		if ((addr & 3) || addr < 0 ||
+		    addr > sizeof(struct user) - 3)
+			break;
+
+		tmp = 0;  /* Default return condition */
+		if (addr < NR_PTREGS << 2)
+			tmp = get_stack_long(child,
+					     ptrace_regid_to_frame[addr]);
+		ret = put_user(tmp, (unsigned long *) data);
+		break;
+	}
+
+	/* write the word at location addr. */
+	case PTRACE_POKETEXT:
+	case PTRACE_POKEDATA:
+		if (access_process_vm(child, addr, &data, sizeof(data), 1) ==
+		    sizeof(data))
+			ret = 0;
+		else
+			ret = -EIO;
+		break;
+
+		/* write the word at location addr in the USER area */
+	case PTRACE_POKEUSR:
+		ret = -EIO;
+		if ((addr & 3) || addr < 0 ||
+		    addr > sizeof(struct user) - 3)
+			break;
+
+		ret = 0;
+		if (addr < NR_PTREGS << 2)
+			ret = put_stack_long(child, ptrace_regid_to_frame[addr],
+					     data);
+		break;
+
+		/* continue and stop at next (return from) syscall */
+	case PTRACE_SYSCALL:
+		/* restart after signal. */
+	case PTRACE_CONT:
+		ret = -EIO;
+		if ((unsigned long) data > _NSIG)
+			break;
+		if (request == PTRACE_SYSCALL)
+			set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
+		else
+			clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
+		child->exit_code = data;
+		ptrace_disable(child);
+		wake_up_process(child);
+		ret = 0;
+		break;
+
+		/*
+		 * make the child exit
+		 * - the best I can do is send it a sigkill
+		 * - perhaps it should be put in the status that it wants to
+		 *   exit
+		 */
+	case PTRACE_KILL:
+		ret = 0;
+		if (child->exit_state == EXIT_ZOMBIE)	/* already dead */
+			break;
+		child->exit_code = SIGKILL;
+		clear_tsk_thread_flag(child, TIF_SINGLESTEP);
+		ptrace_disable(child);
+		wake_up_process(child);
+		break;
+
+	case PTRACE_SINGLESTEP: /* set the trap flag. */
+#ifndef CONFIG_MN10300_USING_JTAG
+		ret = -EIO;
+		if ((unsigned long) data > _NSIG)
+			break;
+		clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
+		ptrace_enable(child);
+		child->exit_code = data;
+		wake_up_process(child);
+		ret = 0;
+#else
+		ret = -EINVAL;
+#endif
+		break;
+
+	case PTRACE_DETACH:	/* detach a process that was attached. */
+		ret = ptrace_detach(child, data);
+		break;
+
+		/* Get all gp regs from the child. */
+	case PTRACE_GETREGS: {
+		unsigned long tmp;
+
+		if (!access_ok(VERIFY_WRITE, (unsigned *) data, NR_PTREGS << 2)) {
+			ret = -EIO;
+			break;
+		}
+
+		for (i = 0; i < NR_PTREGS << 2; i += 4) {
+			tmp = get_stack_long(child, ptrace_regid_to_frame[i]);
+			__put_user(tmp, (unsigned long *) data);
+			data += sizeof(tmp);
+		}
+		ret = 0;
+		break;
+	}
+
+	case PTRACE_SETREGS: { /* Set all gp regs in the child. */
+		unsigned long tmp;
+
+		if (!access_ok(VERIFY_READ, (unsigned long *)data,
+			       sizeof(struct pt_regs))) {
+			ret = -EIO;
+			break;
+		}
+
+		for (i = 0; i < NR_PTREGS << 2; i += 4) {
+			__get_user(tmp, (unsigned long *) data);
+			put_stack_long(child, ptrace_regid_to_frame[i], tmp);
+			data += sizeof(tmp);
+		}
+		ret = 0;
+		break;
+	}
+
+	case PTRACE_GETFPREGS: { /* Get the child FPU state. */
+		if (is_using_fpu(child)) {
+			unlazy_fpu(child);
+			fpu_state = child->thread.fpu_state;
+		} else {
+			memset(&fpu_state, 0, sizeof(fpu_state));
+		}
+
+		ret = -EIO;
+		if (copy_to_user((void *) data, &fpu_state,
+				 sizeof(fpu_state)) == 0)
+			ret = 0;
+		break;
+	}
+
+	case PTRACE_SETFPREGS: { /* Set the child FPU state. */
+		ret = -EFAULT;
+		if (copy_from_user(&fpu_state, (const void *) data,
+				   sizeof(fpu_state)) == 0) {
+			fpu_kill_state(child);
+			child->thread.fpu_state = fpu_state;
+			set_using_fpu(child);
+			ret = 0;
+		}
+		break;
+	}
+
+	case PTRACE_SETOPTIONS: {
+		if (data & PTRACE_O_TRACESYSGOOD)
+			child->ptrace |= PT_TRACESYSGOOD;
+		else
+			child->ptrace &= ~PT_TRACESYSGOOD;
+		ret = 0;
+		break;
+	}
+
+	default:
+		ret = -EIO;
+		break;
+	}
+
+	return ret;
+}
+
+/*
+ * notification of system call entry/exit
+ * - triggered by current->work.syscall_trace
+ */
+asmlinkage void do_syscall_trace(struct pt_regs *regs, int entryexit)
+{
+#if 0
+	/* just in case... */
+	printk(KERN_DEBUG "[%d] syscall_%lu(%lx,%lx,%lx,%lx) = %lx\n",
+	       current->pid,
+	       regs->orig_d0,
+	       regs->a0,
+	       regs->d1,
+	       regs->a3,
+	       regs->a2,
+	       regs->d0);
+	return;
+#endif
+
+	if (!test_thread_flag(TIF_SYSCALL_TRACE) &&
+	    !test_thread_flag(TIF_SINGLESTEP))
+		return;
+	if (!(current->ptrace & PT_PTRACED))
+		return;
+
+	/* the 0x80 provides a way for the tracing parent to distinguish
+	   between a syscall stop and SIGTRAP delivery */
+	ptrace_notify(SIGTRAP |
+		      ((current->ptrace & PT_TRACESYSGOOD) &&
+		       !test_thread_flag(TIF_SINGLESTEP) ? 0x80 : 0));
+
+	/*
+	 * this isn't the same as continuing with a signal, but it will do
+	 * for normal use.  strace only continues with a signal if the
+	 * stopping signal is not SIGTRAP.  -brl
+	 */
+	if (current->exit_code) {
+		send_sig(current->exit_code, current, 1);
+		current->exit_code = 0;
+	}
+}