summaryrefslogtreecommitdiffstats
path: root/arch/mn10300/kernel
diff options
context:
space:
mode:
authorMark Salter <msalter@redhat.com>2012-12-12 15:36:38 +0000
committerDavid Howells <dhowells@redhat.com>2012-12-12 15:46:14 +0000
commit8f0bcbcab016324c2a3ba4cc715e8e523c29a578 (patch)
tree8833a5b7f169942e41ba907c54ba817b64be4ba2 /arch/mn10300/kernel
parent8d160027ff234bddea627ba54c2b85efa1884867 (diff)
MN10300: fix SMP synchronization between txdma and serial driver
The SoC serial port driver uses a high priority interrupt to handle tx of characters in the tx ring buffer. The driver needs to disable/enable this IRQ from outside of irq context. The original code to do this is not foolproof on SMP machines because the IRQ running on one core could still access the serial port for a short time after the driver running on another core disables the interrupt. This patch adds a flag to tell the IRQ handler that the driver wants to disable the interrupt. After seeing the flag, the IRQ handler will immediately disable the interrupt and exit. After setting the flag, the driver will wait for interrupt to be disabled by the IRQ handler. Signed-off-by: Mark Salter <msalter@redhat.com> Signed-off-by: David Howells <dhowells@redhat.com>
Diffstat (limited to 'arch/mn10300/kernel')
-rw-r--r--arch/mn10300/kernel/asm-offsets.c2
-rw-r--r--arch/mn10300/kernel/mn10300-serial-low.S9
-rw-r--r--arch/mn10300/kernel/mn10300-serial.c121
-rw-r--r--arch/mn10300/kernel/mn10300-serial.h6
4 files changed, 90 insertions, 48 deletions
diff --git a/arch/mn10300/kernel/asm-offsets.c b/arch/mn10300/kernel/asm-offsets.c
index 96f24fab7de..47b3bb0c04f 100644
--- a/arch/mn10300/kernel/asm-offsets.c
+++ b/arch/mn10300/kernel/asm-offsets.c
@@ -96,7 +96,7 @@ void foo(void)
OFFSET(__rx_outp, mn10300_serial_port, rx_outp);
OFFSET(__uart_state, mn10300_serial_port, uart.state);
OFFSET(__tx_xchar, mn10300_serial_port, tx_xchar);
- OFFSET(__tx_break, mn10300_serial_port, tx_break);
+ OFFSET(__tx_flags, mn10300_serial_port, tx_flags);
OFFSET(__intr_flags, mn10300_serial_port, intr_flags);
OFFSET(__rx_icr, mn10300_serial_port, rx_icr);
OFFSET(__tx_icr, mn10300_serial_port, tx_icr);
diff --git a/arch/mn10300/kernel/mn10300-serial-low.S b/arch/mn10300/kernel/mn10300-serial-low.S
index dfc1b6f2fa9..b95e76caf4f 100644
--- a/arch/mn10300/kernel/mn10300-serial-low.S
+++ b/arch/mn10300/kernel/mn10300-serial-low.S
@@ -118,8 +118,8 @@ ENTRY(mn10300_serial_vdma_tx_handler)
movbu d2,(e3) # ACK the interrupt
movhu (e3),d2 # flush
- btst 0x01,(__tx_break,a3) # handle transmit break request
- bne mnsc_vdma_tx_break
+ btst 0xFF,(__tx_flags,a3) # handle transmit flags
+ bne mnsc_vdma_tx_flags
movbu (SCxSTR,e2),d2 # don't try and transmit a char if the
# buffer is not empty
@@ -171,10 +171,13 @@ mnsc_vdma_tx_empty:
bset MNSCx_TX_EMPTY,(__intr_flags,a3)
bra mnsc_vdma_tx_done
-mnsc_vdma_tx_break:
+mnsc_vdma_tx_flags:
+ btst MNSCx_TX_STOP,(__tx_flags,a3)
+ bne mnsc_vdma_tx_stop
movhu (SCxCTR,e2),d2 # turn on break mode
or SC01CTR_BKE,d2
movhu d2,(SCxCTR,e2)
+mnsc_vdma_tx_stop:
mov +(NUM2GxICR_LEVEL(CONFIG_MN10300_SERIAL_IRQ_LEVEL)|GxICR_DETECT),d2
movhu d2,(e3) # disable transmit interrupts on this
# channel
diff --git a/arch/mn10300/kernel/mn10300-serial.c b/arch/mn10300/kernel/mn10300-serial.c
index cac0f0da920..587545cb7e4 100644
--- a/arch/mn10300/kernel/mn10300-serial.c
+++ b/arch/mn10300/kernel/mn10300-serial.c
@@ -444,25 +444,53 @@ struct mn10300_serial_int mn10300_serial_int_tbl[NR_IRQS];
static void mn10300_serial_dis_tx_intr(struct mn10300_serial_port *port)
{
- unsigned long flags;
+ int retries = 100;
u16 x;
- flags = arch_local_cli_save();
- *port->tx_icr = NUM2GxICR_LEVEL(CONFIG_MN10300_SERIAL_IRQ_LEVEL);
- x = *port->tx_icr;
- arch_local_irq_restore(flags);
+ /* nothing to do if irq isn't set up */
+ if (!mn10300_serial_int_tbl[port->tx_irq].port)
+ return;
+
+ port->tx_flags |= MNSCx_TX_STOP;
+ mb();
+
+ /*
+ * Here we wait for the irq to be disabled. Either it already is
+ * disabled or we wait some number of retries for the VDMA handler
+ * to disable it. The retries give the VDMA handler enough time to
+ * run to completion if it was already in progress. If the VDMA IRQ
+ * is enabled but the handler is not yet running when arrive here,
+ * the STOP flag will prevent the handler from conflicting with the
+ * driver code following this loop.
+ */
+ while ((*port->tx_icr & GxICR_ENABLE) && retries-- > 0)
+ ;
+ if (retries <= 0) {
+ *port->tx_icr =
+ NUM2GxICR_LEVEL(CONFIG_MN10300_SERIAL_IRQ_LEVEL);
+ x = *port->tx_icr;
+ }
}
static void mn10300_serial_en_tx_intr(struct mn10300_serial_port *port)
{
- unsigned long flags;
u16 x;
- flags = arch_local_cli_save();
+ /* nothing to do if irq isn't set up */
+ if (!mn10300_serial_int_tbl[port->tx_irq].port)
+ return;
+
+ /* stop vdma irq if not already stopped */
+ if (!(port->tx_flags & MNSCx_TX_STOP))
+ mn10300_serial_dis_tx_intr(port);
+
+ port->tx_flags &= ~MNSCx_TX_STOP;
+ mb();
+
*port->tx_icr =
- NUM2GxICR_LEVEL(CONFIG_MN10300_SERIAL_IRQ_LEVEL) | GxICR_ENABLE;
+ NUM2GxICR_LEVEL(CONFIG_MN10300_SERIAL_IRQ_LEVEL) |
+ GxICR_ENABLE | GxICR_REQUEST | GxICR_DETECT;
x = *port->tx_icr;
- arch_local_irq_restore(flags);
}
static void mn10300_serial_dis_rx_intr(struct mn10300_serial_port *port)
@@ -807,8 +835,6 @@ static void mn10300_serial_start_tx(struct uart_port *_port)
struct mn10300_serial_port *port =
container_of(_port, struct mn10300_serial_port, uart);
- u16 x;
-
_enter("%s{%lu}",
port->name,
CIRC_CNT(&port->uart.state->xmit.head,
@@ -816,14 +842,7 @@ static void mn10300_serial_start_tx(struct uart_port *_port)
UART_XMIT_SIZE));
/* kick the virtual DMA controller */
- arch_local_cli();
- x = *port->tx_icr;
- x |= GxICR_ENABLE;
-
- if (*port->_status & SC01STR_TBF)
- x &= ~(GxICR_REQUEST | GxICR_DETECT);
- else
- x |= GxICR_REQUEST | GxICR_DETECT;
+ mn10300_serial_en_tx_intr(port);
_debug("CTR=%04hx ICR=%02hx STR=%04x TMD=%02hx TBR=%04hx ICR=%04hx",
*port->_control, *port->_intr, *port->_status,
@@ -831,10 +850,6 @@ static void mn10300_serial_start_tx(struct uart_port *_port)
(port->div_timer == MNSCx_DIV_TIMER_8BIT) ?
*(volatile u8 *)port->_tmxbr : *port->_tmxbr,
*port->tx_icr);
-
- *port->tx_icr = x;
- x = *port->tx_icr;
- arch_local_sti();
}
/*
@@ -844,13 +859,17 @@ static void mn10300_serial_send_xchar(struct uart_port *_port, char ch)
{
struct mn10300_serial_port *port =
container_of(_port, struct mn10300_serial_port, uart);
+ unsigned long flags;
_enter("%s,%02x", port->name, ch);
if (likely(port->gdbstub)) {
port->tx_xchar = ch;
- if (ch)
+ if (ch) {
+ spin_lock_irqsave(&port->uart.lock, flags);
mn10300_serial_en_tx_intr(port);
+ spin_unlock_irqrestore(&port->uart.lock, flags);
+ }
}
}
@@ -911,18 +930,21 @@ static void mn10300_serial_break_ctl(struct uart_port *_port, int ctl)
{
struct mn10300_serial_port *port =
container_of(_port, struct mn10300_serial_port, uart);
+ unsigned long flags;
_enter("%s,%d", port->name, ctl);
+ spin_lock_irqsave(&port->uart.lock, flags);
if (ctl) {
/* tell the virtual DMA handler to assert BREAK */
- port->tx_break = 1;
+ port->tx_flags |= MNSCx_TX_BREAK;
mn10300_serial_en_tx_intr(port);
} else {
- port->tx_break = 0;
+ port->tx_flags &= ~MNSCx_TX_BREAK;
*port->_control &= ~SC01CTR_BKE;
mn10300_serial_en_tx_intr(port);
}
+ spin_unlock_irqrestore(&port->uart.lock, flags);
}
/*
@@ -945,6 +967,7 @@ static int mn10300_serial_startup(struct uart_port *_port)
return -ENOMEM;
port->rx_inp = port->rx_outp = 0;
+ port->tx_flags = 0;
/* finally, enable the device */
*port->_intr = SC01ICR_TI;
@@ -994,14 +1017,22 @@ error:
*/
static void mn10300_serial_shutdown(struct uart_port *_port)
{
+ unsigned long flags;
u16 x;
struct mn10300_serial_port *port =
container_of(_port, struct mn10300_serial_port, uart);
_enter("%s", port->name);
+ spin_lock_irqsave(&_port->lock, flags);
+ mn10300_serial_dis_tx_intr(port);
+
+ *port->rx_icr = NUM2GxICR_LEVEL(CONFIG_MN10300_SERIAL_IRQ_LEVEL);
+ x = *port->rx_icr;
+ port->tx_flags = 0;
+ spin_unlock_irqrestore(&_port->lock, flags);
+
/* disable the serial port and its baud rate timer */
- port->tx_break = 0;
*port->_control &= ~(SC01CTR_TXE | SC01CTR_RXE | SC01CTR_BKE);
*port->_tmxmd = 0;
@@ -1016,12 +1047,8 @@ static void mn10300_serial_shutdown(struct uart_port *_port)
free_irq(port->rx_irq, port);
free_irq(port->tx_irq, port);
- arch_local_cli();
- *port->rx_icr = NUM2GxICR_LEVEL(CONFIG_MN10300_SERIAL_IRQ_LEVEL);
- x = *port->rx_icr;
- *port->tx_icr = NUM2GxICR_LEVEL(CONFIG_MN10300_SERIAL_IRQ_LEVEL);
- x = *port->tx_icr;
- arch_local_sti();
+ mn10300_serial_int_tbl[port->tx_irq].port = NULL;
+ mn10300_serial_int_tbl[port->rx_irq].port = NULL;
}
/*
@@ -1549,17 +1576,24 @@ static void mn10300_serial_console_write(struct console *co,
{
struct mn10300_serial_port *port;
unsigned i;
- u16 scxctr, txicr, tmp;
+ u16 scxctr;
u8 tmxmd;
+ unsigned long flags;
+ int locked = 1;
port = mn10300_serial_ports[co->index];
+ local_irq_save(flags);
+ if (port->uart.sysrq) {
+ /* mn10300_serial_interrupt() already took the lock */
+ locked = 0;
+ } else if (oops_in_progress) {
+ locked = spin_trylock(&port->uart.lock);
+ } else
+ spin_lock(&port->uart.lock);
+
/* firstly hijack the serial port from the "virtual DMA" controller */
- arch_local_cli();
- txicr = *port->tx_icr;
- *port->tx_icr = NUM2GxICR_LEVEL(CONFIG_MN10300_SERIAL_IRQ_LEVEL);
- tmp = *port->tx_icr;
- arch_local_sti();
+ mn10300_serial_dis_tx_intr(port);
/* the transmitter may be disabled */
scxctr = *port->_control;
@@ -1613,10 +1647,11 @@ static void mn10300_serial_console_write(struct console *co,
if (!(scxctr & SC01CTR_TXE))
*port->_control = scxctr;
- arch_local_cli();
- *port->tx_icr = txicr;
- tmp = *port->tx_icr;
- arch_local_sti();
+ mn10300_serial_en_tx_intr(port);
+
+ if (locked)
+ spin_unlock(&port->uart.lock);
+ local_irq_restore(flags);
}
/*
diff --git a/arch/mn10300/kernel/mn10300-serial.h b/arch/mn10300/kernel/mn10300-serial.h
index 6796499bf78..0004e61619a 100644
--- a/arch/mn10300/kernel/mn10300-serial.h
+++ b/arch/mn10300/kernel/mn10300-serial.h
@@ -29,6 +29,10 @@
#define MNSCx_TX_SPACE 0x04
#define MNSCx_TX_EMPTY 0x08
+/* tx_flags bits */
+#define MNSCx_TX_BREAK 0x01
+#define MNSCx_TX_STOP 0x02
+
#ifndef __ASSEMBLY__
struct mn10300_serial_port {
@@ -36,7 +40,7 @@ struct mn10300_serial_port {
unsigned rx_inp; /* pointer to rx input offset */
unsigned rx_outp; /* pointer to rx output offset */
u8 tx_xchar; /* high-priority XON/XOFF buffer */
- u8 tx_break; /* transmit break request */
+ u8 tx_flags; /* transmit break/stop request */
u8 intr_flags; /* interrupt flags */
volatile u16 *rx_icr; /* Rx interrupt control register */
volatile u16 *tx_icr; /* Tx interrupt control register */