Merge git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-2.6-mn10300

* git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-2.6-mn10300: (44 commits)
  MN10300: Save frame pointer in thread_info struct rather than global var
  MN10300: Change "Matsushita" to "Panasonic".
  MN10300: Create a defconfig for the ASB2364 board
  MN10300: Update the ASB2303 defconfig
  MN10300: ASB2364: Add support for SMSC911X and SMC911X
  MN10300: ASB2364: Handle the IRQ multiplexer in the FPGA
  MN10300: Generic time support
  MN10300: Specify an ELF HWCAP flag for MN10300 Atomic Operations Unit support
  MN10300: Map userspace atomic op regs as a vmalloc page
  MN10300: And Panasonic AM34 subarch and implement SMP
  MN10300: Delete idle_timestamp from irq_cpustat_t
  MN10300: Make various interrupt priority settings configurable
  MN10300: Optimise do_csum()
  MN10300: Implement atomic ops using atomic ops unit
  MN10300: Make the FPU operate in non-lazy mode under SMP
  MN10300: SMP TLB flushing
  MN10300: Use the [ID]PTEL2 registers rather than [ID]PTEL for TLB control
  MN10300: Make the use of PIDR to mark TLB entries controllable
  MN10300: Rename __flush_tlb*() to local_flush_tlb*()
  MN10300: AM34 erratum requires MMUCTR read and write on exception entry
  ...

1 files changed, 0 insertions, 289 deletions

diff --git a/arch/mn10300/mm/cache-mn10300.S b/arch/mn10300/mm/cache-mn10300.S
deleted file mode 100644
index e839d0aedd6..00000000000
--- a/arch/mn10300/mm/cache-mn10300.S
+++ /dev/null
@@ -1,289 +0,0 @@
-/* MN10300 CPU core caching routines
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-#include <linux/sys.h>
-#include <linux/linkage.h>
-#include <asm/smp.h>
-#include <asm/page.h>
-#include <asm/cache.h>
-
-#define mn10300_dcache_inv_range_intr_interval \
-	+((1 << MN10300_DCACHE_INV_RANGE_INTR_LOG2_INTERVAL) - 1)
-
-#if mn10300_dcache_inv_range_intr_interval > 0xff
-#error MN10300_DCACHE_INV_RANGE_INTR_LOG2_INTERVAL must be 8 or less
-#endif
-
-	.am33_2
-
-	.globl mn10300_icache_inv
-	.globl mn10300_dcache_inv
-	.globl mn10300_dcache_inv_range
-	.globl mn10300_dcache_inv_range2
-	.globl mn10300_dcache_inv_page
-
-###############################################################################
-#
-# void mn10300_icache_inv(void)
-# Invalidate the entire icache
-#
-###############################################################################
-	ALIGN
-mn10300_icache_inv:
-	mov	CHCTR,a0
-
-	movhu	(a0),d0
-	btst	CHCTR_ICEN,d0
-	beq	mn10300_icache_inv_end
-
-	mov	epsw,d1
-	and	~EPSW_IE,epsw
-	nop
-	nop
-
-	# disable the icache
-	and	~CHCTR_ICEN,d0
-	movhu	d0,(a0)
-
-	# and wait for it to calm down
-	setlb
-	movhu	(a0),d0
-	btst	CHCTR_ICBUSY,d0
-	lne
-
-	# invalidate
-	or	CHCTR_ICINV,d0
-	movhu	d0,(a0)
-
-	# wait for the cache to finish
-	mov	CHCTR,a0
-	setlb
-	movhu	(a0),d0
-	btst	CHCTR_ICBUSY,d0
-	lne
-
-	# and reenable it
-	and	~CHCTR_ICINV,d0
-	or	CHCTR_ICEN,d0
-	movhu	d0,(a0)
-	movhu	(a0),d0
-
-	mov	d1,epsw
-
-mn10300_icache_inv_end:
-	ret	[],0
-
-###############################################################################
-#
-# void mn10300_dcache_inv(void)
-# Invalidate the entire dcache
-#
-###############################################################################
-	ALIGN
-mn10300_dcache_inv:
-	mov	CHCTR,a0
-
-	movhu	(a0),d0
-	btst	CHCTR_DCEN,d0
-	beq	mn10300_dcache_inv_end
-
-	mov	epsw,d1
-	and	~EPSW_IE,epsw
-	nop
-	nop
-
-	# disable the dcache
-	and	~CHCTR_DCEN,d0
-	movhu	d0,(a0)
-
-	# and wait for it to calm down
-	setlb
-	movhu	(a0),d0
-	btst	CHCTR_DCBUSY,d0
-	lne
-
-	# invalidate
-	or	CHCTR_DCINV,d0
-	movhu	d0,(a0)
-
-	# wait for the cache to finish
-	mov	CHCTR,a0
-	setlb
-	movhu	(a0),d0
-	btst	CHCTR_DCBUSY,d0
-	lne
-
-	# and reenable it
-	and	~CHCTR_DCINV,d0
-	or	CHCTR_DCEN,d0
-	movhu	d0,(a0)
-	movhu	(a0),d0
-
-	mov	d1,epsw
-
-mn10300_dcache_inv_end:
-	ret	[],0
-
-###############################################################################
-#
-# void mn10300_dcache_inv_range(unsigned start, unsigned end)
-# void mn10300_dcache_inv_range2(unsigned start, unsigned size)
-# void mn10300_dcache_inv_page(unsigned start)
-# Invalidate a range of addresses on a page in the dcache
-#
-###############################################################################
-	ALIGN
-mn10300_dcache_inv_page:
-	mov	PAGE_SIZE,d1
-mn10300_dcache_inv_range2:
-	add	d0,d1
-mn10300_dcache_inv_range:
-	movm	[d2,d3,a2],(sp)
-	mov	CHCTR,a2
-
-	movhu	(a2),d2
-	btst	CHCTR_DCEN,d2
-	beq	mn10300_dcache_inv_range_end
-
-	and	L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d0	# round start
-								# addr down
-	mov	d0,a1
-
-	add	L1_CACHE_BYTES,d1			# round end addr up
-	and	L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d1
-
-	clr	d2				# we're going to clear tag ram
-						# entries
-
-	# read the tags from the tag RAM, and if they indicate a valid dirty
-	# cache line then invalidate that line
-	mov	DCACHE_TAG(0,0),a0
-	mov	a1,d0
-	and	L1_CACHE_TAG_ENTRY,d0
-	add	d0,a0				# starting dcache tag RAM
-						# access address
-
-	sub	a1,d1
-	lsr	L1_CACHE_SHIFT,d1		# total number of entries to
-						# examine
-
-	and	~(L1_CACHE_DISPARITY-1),a1	# determine comparator base
-
-mn10300_dcache_inv_range_outer_loop:
-	# disable interrupts
-	mov	epsw,d3
-	and	~EPSW_IE,epsw
-	nop					# note that reading CHCTR and
-						# AND'ing D0 occupy two delay
-						# slots after disabling
-						# interrupts
-
-	# disable the dcache
-	movhu	(a2),d0
-	and	~CHCTR_DCEN,d0
-	movhu	d0,(a2)
-
-	# and wait for it to calm down
-	setlb
-	movhu	(a2),d0
-	btst	CHCTR_DCBUSY,d0
-	lne
-
-mn10300_dcache_inv_range_loop:
-
-	# process the way 0 slot
-	mov	(L1_CACHE_WAYDISP*0,a0),d0	# read the tag in the way 0 slot
-	btst	L1_CACHE_TAG_VALID,d0
-	beq	mn10300_dcache_inv_range_skip_0	# jump if this cacheline is not
-						# valid
-
-	xor	a1,d0
-	lsr	12,d0
-	bne	mn10300_dcache_inv_range_skip_0	# jump if not this cacheline
-
-	mov	d2,(a0)				# kill the tag
-
-mn10300_dcache_inv_range_skip_0:
-
-	# process the way 1 slot
-	mov	(L1_CACHE_WAYDISP*1,a0),d0	# read the tag in the way 1 slot
-	btst	L1_CACHE_TAG_VALID,d0
-	beq	mn10300_dcache_inv_range_skip_1	# jump if this cacheline is not
-						# valid
-
-	xor	a1,d0
-	lsr	12,d0
-	bne	mn10300_dcache_inv_range_skip_1	# jump if not this cacheline
-
-	mov	d2,(a0)				# kill the tag
-
-mn10300_dcache_inv_range_skip_1:
-
-	# process the way 2 slot
-	mov	(L1_CACHE_WAYDISP*2,a0),d0	# read the tag in the way 2 slot
-	btst	L1_CACHE_TAG_VALID,d0
-	beq	mn10300_dcache_inv_range_skip_2	# jump if this cacheline is not
-						# valid
-
-	xor	a1,d0
-	lsr	12,d0
-	bne	mn10300_dcache_inv_range_skip_2	# jump if not this cacheline
-
-	mov	d2,(a0)				# kill the tag
-
-mn10300_dcache_inv_range_skip_2:
-
-	# process the way 3 slot
-	mov	(L1_CACHE_WAYDISP*3,a0),d0	# read the tag in the way 3 slot
-	btst	L1_CACHE_TAG_VALID,d0
-	beq	mn10300_dcache_inv_range_skip_3	# jump if this cacheline is not
-						# valid
-
-	xor	a1,d0
-	lsr	12,d0
-	bne	mn10300_dcache_inv_range_skip_3	# jump if not this cacheline
-
-	mov	d2,(a0)				# kill the tag
-
-mn10300_dcache_inv_range_skip_3:
-
-	# approx every N steps we re-enable the cache and see if there are any
-	# interrupts to be processed
-	# we also break out if we've reached the end of the loop
-	# (the bottom nibble of the count is zero in both cases)
-	add	L1_CACHE_BYTES,a0
-	add	L1_CACHE_BYTES,a1
-	add	-1,d1
-	btst	mn10300_dcache_inv_range_intr_interval,d1
-	bne	mn10300_dcache_inv_range_loop
-
-	# wait for the cache to finish what it's doing
-	setlb
-	movhu	(a2),d0
-	btst	CHCTR_DCBUSY,d0
-	lne
-
-	# and reenable it
-	or	CHCTR_DCEN,d0
-	movhu	d0,(a2)
-	movhu	(a2),d0
-
-	# re-enable interrupts
-	# - we don't bother with delay NOPs as we'll have enough instructions
-	#   before we disable interrupts again to give the interrupts a chance
-	#   to happen
-	mov	d3,epsw
-
-	# go around again if the counter hasn't yet reached zero
-	add	0,d1
-	bne	mn10300_dcache_inv_range_outer_loop
-
-mn10300_dcache_inv_range_end:
-	ret	[d2,d3,a2],12