MN10300: Move DMA engine control reg defs to MN103E010 processor directory

Move the DMA engine control register definitions to the MN103E010 processor
directory so that the MN2WS0050 processor can have its own.

Signed-off-by: Akira Takeuchi <takeuchi.akr@jp.panasonic.com>
Signed-off-by: Kiyoshi Owada <owada.kiyoshi@jp.panasonic.com>
Signed-off-by: David Howells <dhowells@redhat.com>

1 files changed, 102 insertions, 0 deletions

diff --git a/arch/mn10300/proc-mn103e010/include/proc/dmactl-regs.h b/arch/mn10300/proc-mn103e010/include/proc/dmactl-regs.h
new file mode 100644
index 00000000000..d72d328d1f9
--- /dev/null
+++ b/arch/mn10300/proc-mn103e010/include/proc/dmactl-regs.h
@@ -0,0 +1,102 @@
+/* MN103E010 on-board DMA controller registers
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_PROC_DMACTL_REGS_H
+#define _ASM_PROC_DMACTL_REGS_H
+
+#include <asm/cpu-regs.h>
+
+#ifdef __KERNEL__
+
+/* DMA registers */
+#define	DMxCTR(N)		__SYSREG(0xd2000000 + ((N) * 0x100), u32)	/* control reg */
+#define	DMxCTR_BG		0x0000001f	/* transfer request source */
+#define	DMxCTR_BG_SOFT		0x00000000	/* - software source */
+#define	DMxCTR_BG_SC0TX		0x00000002	/* - serial port 0 transmission */
+#define	DMxCTR_BG_SC0RX		0x00000003	/* - serial port 0 reception */
+#define	DMxCTR_BG_SC1TX		0x00000004	/* - serial port 1 transmission */
+#define	DMxCTR_BG_SC1RX		0x00000005	/* - serial port 1 reception */
+#define	DMxCTR_BG_SC2TX		0x00000006	/* - serial port 2 transmission */
+#define	DMxCTR_BG_SC2RX		0x00000007	/* - serial port 2 reception */
+#define	DMxCTR_BG_TM0UFLOW	0x00000008	/* - timer 0 underflow */
+#define	DMxCTR_BG_TM1UFLOW	0x00000009	/* - timer 1 underflow */
+#define	DMxCTR_BG_TM2UFLOW	0x0000000a	/* - timer 2 underflow */
+#define	DMxCTR_BG_TM3UFLOW	0x0000000b	/* - timer 3 underflow */
+#define	DMxCTR_BG_TM6ACMPCAP	0x0000000c	/* - timer 6A compare/capture */
+#define	DMxCTR_BG_AFE		0x0000000d	/* - analogue front-end interrupt source */
+#define	DMxCTR_BG_ADC		0x0000000e	/* - A/D conversion end interrupt source */
+#define	DMxCTR_BG_IRDA		0x0000000f	/* - IrDA interrupt source */
+#define	DMxCTR_BG_RTC		0x00000010	/* - RTC interrupt source */
+#define	DMxCTR_BG_XIRQ0		0x00000011	/* - XIRQ0 pin interrupt source */
+#define	DMxCTR_BG_XIRQ1		0x00000012	/* - XIRQ1 pin interrupt source */
+#define	DMxCTR_BG_XDMR0		0x00000013	/* - external request 0 source (XDMR0 pin) */
+#define	DMxCTR_BG_XDMR1		0x00000014	/* - external request 1 source (XDMR1 pin) */
+#define	DMxCTR_SAM		0x000000e0	/* DMA transfer src addr mode */
+#define	DMxCTR_SAM_INCR		0x00000000	/* - increment */
+#define	DMxCTR_SAM_DECR		0x00000020	/* - decrement */
+#define	DMxCTR_SAM_FIXED	0x00000040	/* - fixed */
+#define	DMxCTR_DAM		0x00000000	/* DMA transfer dest addr mode */
+#define	DMxCTR_DAM_INCR		0x00000000	/* - increment */
+#define	DMxCTR_DAM_DECR		0x00000100	/* - decrement */
+#define	DMxCTR_DAM_FIXED	0x00000200	/* - fixed */
+#define	DMxCTR_TM		0x00001800	/* DMA transfer mode */
+#define	DMxCTR_TM_BATCH		0x00000000	/* - batch transfer */
+#define	DMxCTR_TM_INTERM	0x00001000	/* - intermittent transfer */
+#define	DMxCTR_UT		0x00006000	/* DMA transfer unit */
+#define	DMxCTR_UT_1		0x00000000	/* - 1 byte */
+#define	DMxCTR_UT_2		0x00002000	/* - 2 byte */
+#define	DMxCTR_UT_4		0x00004000	/* - 4 byte */
+#define	DMxCTR_UT_16		0x00006000	/* - 16 byte */
+#define	DMxCTR_TEN		0x00010000	/* DMA channel transfer enable */
+#define	DMxCTR_RQM		0x00060000	/* external request input source mode */
+#define	DMxCTR_RQM_FALLEDGE	0x00000000	/* - falling edge */
+#define	DMxCTR_RQM_RISEEDGE	0x00020000	/* - rising edge */
+#define	DMxCTR_RQM_LOLEVEL	0x00040000	/* - low level */
+#define	DMxCTR_RQM_HILEVEL	0x00060000	/* - high level */
+#define	DMxCTR_RQF		0x01000000	/* DMA transfer request flag */
+#define	DMxCTR_XEND		0x80000000	/* DMA transfer end flag */
+
+#define	DMxSRC(N)		__SYSREG(0xd2000004 + ((N) * 0x100), u32)	/* control reg */
+
+#define	DMxDST(N)		__SYSREG(0xd2000008 + ((N) * 0x100), u32)	/* src addr reg */
+
+#define	DMxSIZ(N)		__SYSREG(0xd200000c + ((N) * 0x100), u32)	/* dest addr reg */
+#define DMxSIZ_CT		0x000fffff	/* number of bytes to transfer */
+
+#define	DMxCYC(N)		__SYSREG(0xd2000010 + ((N) * 0x100), u32)	/* intermittent
+										 * size reg */
+#define DMxCYC_CYC		0x000000ff	/* number of interrmittent transfers -1 */
+
+#define DM0IRQ			16		/* DMA channel 0 complete IRQ */
+#define DM1IRQ			17		/* DMA channel 1 complete IRQ */
+#define DM2IRQ			18		/* DMA channel 2 complete IRQ */
+#define DM3IRQ			19		/* DMA channel 3 complete IRQ */
+
+#define	DM0ICR			GxICR(DM0IRQ)	/* DMA channel 0 complete intr ctrl reg */
+#define	DM1ICR			GxICR(DM0IR1)	/* DMA channel 1 complete intr ctrl reg */
+#define	DM2ICR			GxICR(DM0IR2)	/* DMA channel 2 complete intr ctrl reg */
+#define	DM3ICR			GxICR(DM0IR3)	/* DMA channel 3 complete intr ctrl reg */
+
+#ifndef __ASSEMBLY__
+
+struct mn10300_dmactl_regs {
+	u32		ctr;
+	const void	*src;
+	void		*dst;
+	u32		siz;
+	u32		cyc;
+} __attribute__((aligned(0x100)));
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_PROC_DMACTL_REGS_H */