MN10300: And Panasonic AM34 subarch and implement SMP

Implement the Panasonic MN10300 AM34 CPU subarch and implement SMP support for
MN10300.  Also implement support for the MN2WS0060 processor and the ASB2364
evaluation board which are AM34 based.

Signed-off-by: Akira Takeuchi <takeuchi.akr@jp.panasonic.com>
Signed-off-by: Kiyoshi Owada <owada.kiyoshi@jp.panasonic.com>
Signed-off-by: David Howells <dhowells@redhat.com>

1 files changed, 134 insertions, 0 deletions

diff --git a/arch/mn10300/proc-mn2ws0050/proc-init.c b/arch/mn10300/proc-mn2ws0050/proc-init.c
new file mode 100644
index 00000000000..c58249b9525
--- /dev/null
+++ b/arch/mn10300/proc-mn2ws0050/proc-init.c
@@ -0,0 +1,134 @@
+/* MN2WS0050 processor initialisation
+ *
+ * Copyright (C) 2005 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+
+#include <asm/processor.h>
+#include <asm/system.h>
+#include <asm/uaccess.h>
+#include <asm/io.h>
+#include <asm/atomic.h>
+#include <asm/smp.h>
+#include <asm/pgalloc.h>
+#include <asm/busctl-regs.h>
+#include <unit/timex.h>
+#include <asm/fpu.h>
+#include <asm/rtc.h>
+
+#define MEMCONF __SYSREGC(0xdf800400, u32)
+
+/*
+ * initialise the on-silicon processor peripherals
+ */
+asmlinkage void __init processor_init(void)
+{
+	int loop;
+
+	/* set up the exception table first */
+	for (loop = 0x000; loop < 0x400; loop += 8)
+		__set_intr_stub(loop, __common_exception);
+
+	__set_intr_stub(EXCEP_ITLBMISS,		itlb_miss);
+	__set_intr_stub(EXCEP_DTLBMISS,		dtlb_miss);
+	__set_intr_stub(EXCEP_IAERROR,		itlb_aerror);
+	__set_intr_stub(EXCEP_DAERROR,		dtlb_aerror);
+	__set_intr_stub(EXCEP_BUSERROR,		raw_bus_error);
+	__set_intr_stub(EXCEP_DOUBLE_FAULT,	double_fault);
+	__set_intr_stub(EXCEP_FPU_DISABLED,	fpu_disabled);
+	__set_intr_stub(EXCEP_SYSCALL0,		system_call);
+
+	__set_intr_stub(EXCEP_NMI,		nmi_handler);
+	__set_intr_stub(EXCEP_WDT,		nmi_handler);
+	__set_intr_stub(EXCEP_IRQ_LEVEL0,	irq_handler);
+	__set_intr_stub(EXCEP_IRQ_LEVEL1,	irq_handler);
+	__set_intr_stub(EXCEP_IRQ_LEVEL2,	irq_handler);
+	__set_intr_stub(EXCEP_IRQ_LEVEL3,	irq_handler);
+	__set_intr_stub(EXCEP_IRQ_LEVEL4,	irq_handler);
+	__set_intr_stub(EXCEP_IRQ_LEVEL5,	irq_handler);
+	__set_intr_stub(EXCEP_IRQ_LEVEL6,	irq_handler);
+
+	IVAR0 = EXCEP_IRQ_LEVEL0;
+	IVAR1 = EXCEP_IRQ_LEVEL1;
+	IVAR2 = EXCEP_IRQ_LEVEL2;
+	IVAR3 = EXCEP_IRQ_LEVEL3;
+	IVAR4 = EXCEP_IRQ_LEVEL4;
+	IVAR5 = EXCEP_IRQ_LEVEL5;
+	IVAR6 = EXCEP_IRQ_LEVEL6;
+
+#ifndef CONFIG_MN10300_HAS_CACHE_SNOOP
+	mn10300_dcache_flush_inv();
+	mn10300_icache_inv();
+#endif
+
+	/* disable all interrupts and set to priority 6 (lowest) */
+#ifdef	CONFIG_SMP
+	for (loop = 0; loop < GxICR_NUM_IRQS; loop++)
+		GxICR(loop) = GxICR_LEVEL_6 | GxICR_DETECT;
+#else	/* !CONFIG_SMP */
+	for (loop = 0; loop < NR_IRQS; loop++)
+		GxICR(loop) = GxICR_LEVEL_6 | GxICR_DETECT;
+#endif	/* !CONFIG_SMP */
+
+	/* clear the timers */
+	TM0MD	= 0;
+	TM1MD	= 0;
+	TM2MD	= 0;
+	TM3MD	= 0;
+	TM4MD	= 0;
+	TM5MD	= 0;
+	TM6MD	= 0;
+	TM6MDA	= 0;
+	TM6MDB	= 0;
+	TM7MD	= 0;
+	TM8MD	= 0;
+	TM9MD	= 0;
+	TM10MD	= 0;
+	TM11MD	= 0;
+	TM12MD	= 0;
+	TM13MD	= 0;
+	TM14MD	= 0;
+	TM15MD	= 0;
+
+	calibrate_clock();
+}
+
+/*
+ * determine the memory size and base from the memory controller regs
+ */
+void __init get_mem_info(unsigned long *mem_base, unsigned long *mem_size)
+{
+	unsigned long memconf = MEMCONF;
+	unsigned long size = 0; /* order: MByte */
+
+	*mem_base = 0x90000000; /* fixed address */
+
+	switch (memconf & 0x00000003) {
+	case 0x01:
+		size = 256 / 8;		/* 256 Mbit per chip */
+		break;
+	case 0x02:
+		size = 512 / 8;		/* 512 Mbit per chip */
+		break;
+	case 0x03:
+		size = 1024 / 8;	/*   1 Gbit per chip */
+		break;
+	default:
+		panic("Invalid SDRAM size");
+		break;
+	}
+
+	printk(KERN_INFO "DDR2-SDRAM: %luMB x 2 @%08lx\n", size, *mem_base);
+
+	*mem_size = (size * 2) << 20;
+}