MN10300: And Panasonic AM34 subarch and implement SMP

Implement the Panasonic MN10300 AM34 CPU subarch and implement SMP support for
MN10300.  Also implement support for the MN2WS0060 processor and the ASB2364
evaluation board which are AM34 based.

Signed-off-by: Akira Takeuchi <takeuchi.akr@jp.panasonic.com>
Signed-off-by: Kiyoshi Owada <owada.kiyoshi@jp.panasonic.com>
Signed-off-by: David Howells <dhowells@redhat.com>

10 files changed, 577 insertions, 0 deletions

diff --git a/arch/mn10300/proc-mn2ws0050/Makefile b/arch/mn10300/proc-mn2ws0050/Makefile
new file mode 100644
index 00000000000..d4ca13309a8
--- /dev/null
+++ b/arch/mn10300/proc-mn2ws0050/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the linux kernel.
+#
+
+obj-y   := proc-init.o
diff --git a/arch/mn10300/proc-mn2ws0050/include/proc/cache.h b/arch/mn10300/proc-mn2ws0050/include/proc/cache.h
new file mode 100644
index 00000000000..cafd7b5b55b
--- /dev/null
+++ b/arch/mn10300/proc-mn2ws0050/include/proc/cache.h
@@ -0,0 +1,48 @@
+/* Cache specification
+ *
+ * Copyright (C) 2005 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * Modified by Matsushita Electric Industrial Co., Ltd.
+ * Modifications:
+ *  13-Nov-2006 MEI Add L1_CACHE_SHIFT_MAX definition.
+ *  29-Jul-2008 MEI Add define for MN10300_HAS_AREAPURGE_REG.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef _ASM_PROC_CACHE_H
+#define _ASM_PROC_CACHE_H
+
+/*
+ * L1 cache
+ */
+#define L1_CACHE_NWAYS		4		/* number of ways in caches */
+#define L1_CACHE_NENTRIES	128		/* number of entries in each way */
+#define L1_CACHE_BYTES		32		/* bytes per entry */
+#define L1_CACHE_SHIFT		5		/* shift for bytes per entry */
+#define L1_CACHE_WAYDISP	0x1000		/* distance from one way to the next */
+
+#define L1_CACHE_TAG_VALID	0x00000001	/* cache tag valid bit */
+#define L1_CACHE_TAG_DIRTY	0x00000008	/* data cache tag dirty bit */
+#define L1_CACHE_TAG_ENTRY	0x00000fe0	/* cache tag entry address mask */
+#define L1_CACHE_TAG_ADDRESS	0xfffff000	/* cache tag line address mask */
+
+/*
+ * specification of the interval between interrupt checking intervals whilst
+ * managing the cache with the interrupts disabled
+ */
+#define MN10300_DCACHE_INV_RANGE_INTR_LOG2_INTERVAL	4
+
+/*
+ * The size of range at which it becomes more economical to just flush the
+ * whole cache rather than trying to flush the specified range.
+ */
+#define MN10300_DCACHE_FLUSH_BORDER \
+	+(L1_CACHE_NWAYS * L1_CACHE_NENTRIES * L1_CACHE_BYTES)
+#define MN10300_DCACHE_FLUSH_INV_BORDER	\
+	+(L1_CACHE_NWAYS * L1_CACHE_NENTRIES * L1_CACHE_BYTES)
+
+#endif /* _ASM_PROC_CACHE_H */
diff --git a/arch/mn10300/proc-mn2ws0050/include/proc/clock.h b/arch/mn10300/proc-mn2ws0050/include/proc/clock.h
new file mode 100644
index 00000000000..fe4c0a4a53a
--- /dev/null
+++ b/arch/mn10300/proc-mn2ws0050/include/proc/clock.h
@@ -0,0 +1,20 @@
+/* clock.h: proc-specific clocks
+ *
+ * Copyright (C) 2002 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * Modified by Matsushita Electric Industrial Co., Ltd.
+ * Modifications:
+ *  23-Feb-2007 MEI Delete define for watchdog timer.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef _ASM_PROC_CLOCK_H
+#define _ASM_PROC_CLOCK_H
+
+#include <unit/clock.h>
+
+#endif /* _ASM_PROC_CLOCK_H */
diff --git a/arch/mn10300/proc-mn2ws0050/include/proc/dmactl-regs.h b/arch/mn10300/proc-mn2ws0050/include/proc/dmactl-regs.h
new file mode 100644
index 00000000000..4c4319e241d
--- /dev/null
+++ b/arch/mn10300/proc-mn2ws0050/include/proc/dmactl-regs.h
@@ -0,0 +1,103 @@
+/* MN2WS0050 on-board DMA controller registers
+ *
+ * Copyright (C) 2002 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ */
+
+#ifndef _ASM_PROC_DMACTL_REGS_H
+#define _ASM_PROC_DMACTL_REGS_H
+
+#include <asm/cpu-regs.h>
+
+#ifdef __KERNEL__
+
+/* DMA registers */
+#define	DMxCTR(N)		__SYSREG(0xd4005000+(N*0x100), u32)	/* control reg */
+#define	DMxCTR_BG		0x0000001f	/* transfer request source */
+#define	DMxCTR_BG_SOFT		0x00000000	/* - software source */
+#define	DMxCTR_BG_SC0TX		0x00000002	/* - serial port 0 transmission */
+#define	DMxCTR_BG_SC0RX		0x00000003	/* - serial port 0 reception */
+#define	DMxCTR_BG_SC1TX		0x00000004	/* - serial port 1 transmission */
+#define	DMxCTR_BG_SC1RX		0x00000005	/* - serial port 1 reception */
+#define	DMxCTR_BG_SC2TX		0x00000006	/* - serial port 2 transmission */
+#define	DMxCTR_BG_SC2RX		0x00000007	/* - serial port 2 reception */
+#define	DMxCTR_BG_TM0UFLOW	0x00000008	/* - timer 0 underflow */
+#define	DMxCTR_BG_TM1UFLOW	0x00000009	/* - timer 1 underflow */
+#define	DMxCTR_BG_TM2UFLOW	0x0000000a	/* - timer 2 underflow */
+#define	DMxCTR_BG_TM3UFLOW	0x0000000b	/* - timer 3 underflow */
+#define	DMxCTR_BG_TM6ACMPCAP	0x0000000c	/* - timer 6A compare/capture */
+#define	DMxCTR_BG_RYBY		0x0000000d	/* - NAND Flash RY/BY request source */
+#define	DMxCTR_BG_RMC		0x0000000e	/* - remote controller output */
+#define	DMxCTR_BG_XIRQ12	0x00000011	/* - XIRQ12 pin interrupt source */
+#define	DMxCTR_BG_XIRQ13	0x00000012	/* - XIRQ13 pin interrupt source */
+#define	DMxCTR_BG_TCK		0x00000014	/* - tick timer underflow */
+#define	DMxCTR_BG_SC4TX		0x00000019	/* - serial port4 transmission */
+#define	DMxCTR_BG_SC4RX		0x0000001a	/* - serial port4 reception */
+#define	DMxCTR_BG_SC5TX		0x0000001b	/* - serial port5 transmission */
+#define	DMxCTR_BG_SC5RX		0x0000001c	/* - serial port5 reception */
+#define	DMxCTR_BG_SC6TX		0x0000001d	/* - serial port6 transmission */
+#define	DMxCTR_BG_SC6RX		0x0000001e	/* - serial port6 reception */
+#define	DMxCTR_BG_TMSUFLOW	0x0000001f	/* - timestamp timer underflow */
+#define	DMxCTR_SAM		0x00000060	/* DMA transfer src addr mode */
+#define	DMxCTR_SAM_INCR		0x00000000	/* - increment */
+#define	DMxCTR_SAM_DECR		0x00000020	/* - decrement */
+#define	DMxCTR_SAM_FIXED	0x00000040	/* - fixed */
+#define	DMxCTR_DAM		0x00000300	/* DMA transfer dest addr mode */
+#define	DMxCTR_DAM_INCR		0x00000000	/* - increment */
+#define	DMxCTR_DAM_DECR		0x00000100	/* - decrement */
+#define	DMxCTR_DAM_FIXED	0x00000200	/* - fixed */
+#define	DMxCTR_UT		0x00006000	/* DMA transfer unit */
+#define	DMxCTR_UT_1		0x00000000	/* - 1 byte */
+#define	DMxCTR_UT_2		0x00002000	/* - 2 byte */
+#define	DMxCTR_UT_4		0x00004000	/* - 4 byte */
+#define	DMxCTR_UT_16		0x00006000	/* - 16 byte */
+#define DMxCTR_RRE		0x00008000	/* DMA round robin enable */
+#define	DMxCTR_TEN		0x00010000	/* DMA channel transfer enable */
+#define	DMxCTR_RQM		0x00060000	/* external request input source mode */
+#define	DMxCTR_RQM_FALLEDGE	0x00000000	/* - falling edge */
+#define	DMxCTR_RQM_RISEEDGE	0x00020000	/* - rising edge */
+#define	DMxCTR_RQM_LOLEVEL	0x00040000	/* - low level */
+#define	DMxCTR_RQM_HILEVEL	0x00060000	/* - high level */
+#define	DMxCTR_RQF		0x01000000	/* DMA transfer request flag */
+#define	DMxCTR_PERR		0x40000000	/* DMA transfer parameter error flag */
+#define	DMxCTR_XEND		0x80000000	/* DMA transfer end flag */
+
+#define	DMxSRC(N)		__SYSREG(0xd4005004+(N*0x100), u32)	/* control reg */
+
+#define	DMxDST(N)		__SYSREG(0xd4005008+(N*0x100), u32)	/* source addr reg */
+
+#define	DMxSIZ(N)		__SYSREG(0xd400500c+(N*0x100), u32)	/* dest addr reg */
+#define DMxSIZ_CT		0x000fffff	/* number of bytes to transfer */
+
+#define	DMxCYC(N)		__SYSREG(0xd4005010+(N*0x100), u32)	/* intermittent size reg */
+#define DMxCYC_CYC		0x000000ff	/* number of interrmittent transfers -1 */
+
+#define DM0IRQ			16		/* DMA channel 0 complete IRQ */
+#define DM1IRQ			17		/* DMA channel 1 complete IRQ */
+#define DM2IRQ			18		/* DMA channel 2 complete IRQ */
+#define DM3IRQ			19		/* DMA channel 3 complete IRQ */
+
+#define	DM0ICR			GxICR(DM0IRQ)	/* DMA channel 0 complete intr ctrl reg */
+#define	DM1ICR			GxICR(DM0IR1)	/* DMA channel 1 complete intr ctrl reg */
+#define	DM2ICR			GxICR(DM0IR2)	/* DMA channel 2 complete intr ctrl reg */
+#define	DM3ICR			GxICR(DM0IR3)	/* DMA channel 3 complete intr ctrl reg */
+
+#ifndef __ASSEMBLY__
+
+struct mn10300_dmactl_regs {
+	u32		ctr;
+	const void	*src;
+	void		*dst;
+	u32		siz;
+	u32		cyc;
+} __attribute__((aligned(0x100)));
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_PROC_DMACTL_REGS_H */
diff --git a/arch/mn10300/proc-mn2ws0050/include/proc/intctl-regs.h b/arch/mn10300/proc-mn2ws0050/include/proc/intctl-regs.h
new file mode 100644
index 00000000000..a1e977273d1
--- /dev/null
+++ b/arch/mn10300/proc-mn2ws0050/include/proc/intctl-regs.h
@@ -0,0 +1,29 @@
+#ifndef _ASM_PROC_INTCTL_REGS_H
+#define _ASM_PROC_INTCTL_REGS_H
+
+#ifndef _ASM_INTCTL_REGS_H
+# error "please don't include this file directly"
+#endif
+
+/* intr acceptance group reg */
+#define IAGR			__SYSREG(0xd4000100, u16)
+
+/* group number register */
+#define IAGR_GN			0x003fc
+
+#define __GET_XIRQ_TRIGGER(X, Z) (((Z) >> ((X) * 2)) & 3)
+
+#define __SET_XIRQ_TRIGGER(X, Y, Z)		\
+({						\
+	typeof(Z) x = (Z);			\
+	x &= ~(3 << ((X) * 2));			\
+	x |= ((Y) & 3) << ((X) * 2);		\
+	(Z) = x;				\
+})
+
+/* external pin intr spec reg */
+#define EXTMD0			__SYSREG(0xd4000200, u32)
+#define GET_XIRQ_TRIGGER(X)	__GET_XIRQ_TRIGGER(X, EXTMD0)
+#define SET_XIRQ_TRIGGER(X, Y)	__SET_XIRQ_TRIGGER(X, Y, EXTMD0)
+
+#endif /* _ASM_PROC_INTCTL_REGS_H */
diff --git a/arch/mn10300/proc-mn2ws0050/include/proc/irq.h b/arch/mn10300/proc-mn2ws0050/include/proc/irq.h
new file mode 100644
index 00000000000..37777a85ab6
--- /dev/null
+++ b/arch/mn10300/proc-mn2ws0050/include/proc/irq.h
@@ -0,0 +1,49 @@
+/* MN2WS0050 on-board interrupt controller registers
+ *
+ * Copyright (C) 2002 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * Modified by Matsushita Electric Industrial Co., Ltd.
+ * Modifications:
+ *  13-Nov-2006 MEI Define extended IRQ number for SMP support.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _PROC_IRQ_H
+#define _PROC_IRQ_H
+
+#ifdef __KERNEL__
+
+#define GxICR_NUM_IRQS		163
+#ifdef CONFIG_SMP
+#define GxICR_NUM_EXT_IRQS	197
+#endif  /* CONFIG_SMP */
+
+#define GxICR_NUM_XIRQS		16
+
+#define XIRQ0		34
+#define XIRQ1		35
+#define XIRQ2		36
+#define XIRQ3		37
+#define XIRQ4		38
+#define XIRQ5		39
+#define XIRQ6		40
+#define XIRQ7		41
+#define XIRQ8		42
+#define XIRQ9		43
+#define XIRQ10		44
+#define XIRQ11		45
+#define XIRQ12		46
+#define XIRQ13		47
+#define XIRQ14		48
+#define XIRQ15		49
+
+#define XIRQ2IRQ(num)	(XIRQ0 + num)
+
+#endif /* __KERNEL__ */
+
+#endif /* _PROC_IRQ_H */
diff --git a/arch/mn10300/proc-mn2ws0050/include/proc/nand-regs.h b/arch/mn10300/proc-mn2ws0050/include/proc/nand-regs.h
new file mode 100644
index 00000000000..84448f3828b
--- /dev/null
+++ b/arch/mn10300/proc-mn2ws0050/include/proc/nand-regs.h
@@ -0,0 +1,120 @@
+/* NAND flash interface register definitions
+ *
+ * Copyright (C) 2008-2009 Panasonic Corporation
+ * All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef	_PROC_NAND_REGS_H_
+#define	_PROC_NAND_REGS_H_
+
+/* command register */
+#define FCOMMAND_0		__SYSREG(0xd8f00000, u8) /* fcommand[24:31] */
+#define FCOMMAND_1		__SYSREG(0xd8f00001, u8) /* fcommand[16:23] */
+#define FCOMMAND_2		__SYSREG(0xd8f00002, u8) /* fcommand[8:15] */
+#define FCOMMAND_3		__SYSREG(0xd8f00003, u8) /* fcommand[0:7] */
+
+/* for dma 16 byte trans, use FCOMMAND2 register */
+#define FCOMMAND2_0		__SYSREG(0xd8f00110, u8) /* fcommand2[24:31] */
+#define FCOMMAND2_1		__SYSREG(0xd8f00111, u8) /* fcommand2[16:23] */
+#define FCOMMAND2_2		__SYSREG(0xd8f00112, u8) /* fcommand2[8:15] */
+#define FCOMMAND2_3		__SYSREG(0xd8f00113, u8) /* fcommand2[0:7] */
+
+#define FCOMMAND_FIEN		0x80		/* nand flash I/F enable */
+#define FCOMMAND_BW_8BIT	0x00		/* 8bit bus width */
+#define FCOMMAND_BW_16BIT	0x40		/* 16bit bus width */
+#define FCOMMAND_BLOCKSZ_SMALL	0x00		/* small block */
+#define FCOMMAND_BLOCKSZ_LARGE	0x20		/* large block */
+#define FCOMMAND_DMASTART	0x10		/* dma start */
+#define FCOMMAND_RYBY		0x08		/* ready/busy flag */
+#define FCOMMAND_RYBYINTMSK	0x04		/* mask ready/busy interrupt */
+#define FCOMMAND_XFWP		0x02		/* write protect enable */
+#define FCOMMAND_XFCE		0x01		/* flash device disable */
+#define FCOMMAND_SEQKILL	0x10		/* stop seq-read */
+#define FCOMMAND_ANUM		0x07		/* address cycle */
+#define FCOMMAND_ANUM_NONE	0x00		/* address cycle none */
+#define FCOMMAND_ANUM_1CYC	0x01		/* address cycle 1cycle */
+#define FCOMMAND_ANUM_2CYC	0x02		/* address cycle 2cycle */
+#define FCOMMAND_ANUM_3CYC	0x03		/* address cycle 3cycle */
+#define FCOMMAND_ANUM_4CYC	0x04		/* address cycle 4cycle */
+#define FCOMMAND_ANUM_5CYC	0x05		/* address cycle 5cycle */
+#define FCOMMAND_FCMD_READ0	0x00		/* read1 command */
+#define FCOMMAND_FCMD_SEQIN	0x80		/* page program 1st command */
+#define FCOMMAND_FCMD_PAGEPROG	0x10		/* page program 2nd command */
+#define FCOMMAND_FCMD_RESET	0xff		/* reset command */
+#define FCOMMAND_FCMD_ERASE1	0x60		/* erase 1st command */
+#define FCOMMAND_FCMD_ERASE2	0xd0		/* erase 2nd command */
+#define FCOMMAND_FCMD_STATUS	0x70		/* read status command */
+#define FCOMMAND_FCMD_READID	0x90		/* read id command */
+#define FCOMMAND_FCMD_READOOB	0x50		/* read3 command */
+/* address register */
+#define FADD			__SYSREG(0xd8f00004, u32)
+/* address register 2 */
+#define FADD2			__SYSREG(0xd8f00008, u32)
+/* error judgement register */
+#define FJUDGE			__SYSREG(0xd8f0000c, u32)
+#define FJUDGE_NOERR		0x0		/* no error */
+#define FJUDGE_1BITERR		0x1		/* 1bit error in data area */
+#define FJUDGE_PARITYERR	0x2		/* parity error */
+#define FJUDGE_UNCORRECTABLE	0x3		/* uncorrectable error */
+#define FJUDGE_ERRJDG_MSK	0x3		/* mask of judgement result */
+/* 1st ECC store register */
+#define FECC11			__SYSREG(0xd8f00010, u32)
+/* 2nd ECC store register */
+#define FECC12			__SYSREG(0xd8f00014, u32)
+/* 3rd ECC store register */
+#define FECC21			__SYSREG(0xd8f00018, u32)
+/* 4th ECC store register */
+#define FECC22			__SYSREG(0xd8f0001c, u32)
+/* 5th ECC store register */
+#define FECC31			__SYSREG(0xd8f00020, u32)
+/* 6th ECC store register */
+#define FECC32			__SYSREG(0xd8f00024, u32)
+/* 7th ECC store register */
+#define FECC41			__SYSREG(0xd8f00028, u32)
+/* 8th ECC store register */
+#define FECC42			__SYSREG(0xd8f0002c, u32)
+/* data register */
+#define FDATA			__SYSREG(0xd8f00030, u32)
+/* access pulse register */
+#define FPWS			__SYSREG(0xd8f00100, u32)
+#define FPWS_PWS1W_2CLK		0x00000000 /* write pulse width 1clock */
+#define FPWS_PWS1W_3CLK		0x01000000 /* write pulse width 2clock */
+#define FPWS_PWS1W_4CLK		0x02000000 /* write pulse width 4clock */
+#define FPWS_PWS1W_5CLK		0x03000000 /* write pulse width 5clock */
+#define FPWS_PWS1W_6CLK		0x04000000 /* write pulse width 6clock */
+#define FPWS_PWS1W_7CLK		0x05000000 /* write pulse width 7clock */
+#define FPWS_PWS1W_8CLK		0x06000000 /* write pulse width 8clock */
+#define FPWS_PWS1R_3CLK		0x00010000 /* read pulse width 3clock */
+#define FPWS_PWS1R_4CLK		0x00020000 /* read pulse width 4clock */
+#define FPWS_PWS1R_5CLK		0x00030000 /* read pulse width 5clock */
+#define FPWS_PWS1R_6CLK		0x00040000 /* read pulse width 6clock */
+#define FPWS_PWS1R_7CLK		0x00050000 /* read pulse width 7clock */
+#define FPWS_PWS1R_8CLK		0x00060000 /* read pulse width 8clock */
+#define FPWS_PWS2W_2CLK		0x00000100 /* write pulse interval 2clock */
+#define FPWS_PWS2W_3CLK		0x00000200 /* write pulse interval 3clock */
+#define FPWS_PWS2W_4CLK		0x00000300 /* write pulse interval 4clock */
+#define FPWS_PWS2W_5CLK		0x00000400 /* write pulse interval 5clock */
+#define FPWS_PWS2W_6CLK		0x00000500 /* write pulse interval 6clock */
+#define FPWS_PWS2R_2CLK		0x00000001 /* read pulse interval 2clock */
+#define FPWS_PWS2R_3CLK		0x00000002 /* read pulse interval 3clock */
+#define FPWS_PWS2R_4CLK		0x00000003 /* read pulse interval 4clock */
+#define FPWS_PWS2R_5CLK		0x00000004 /* read pulse interval 5clock */
+#define FPWS_PWS2R_6CLK		0x00000005 /* read pulse interval 6clock */
+/* command register 2 */
+#define FCOMMAND2		__SYSREG(0xd8f00110, u32)
+/* transfer frequency register */
+#define FNUM			__SYSREG(0xd8f00114, u32)
+#define FSDATA_ADDR		0xd8f00400
+/* active data register */
+#define FSDATA			__SYSREG(FSDATA_ADDR, u32)
+
+#endif /* _PROC_NAND_REGS_H_ */
diff --git a/arch/mn10300/proc-mn2ws0050/include/proc/proc.h b/arch/mn10300/proc-mn2ws0050/include/proc/proc.h
new file mode 100644
index 00000000000..90d5cadd05b
--- /dev/null
+++ b/arch/mn10300/proc-mn2ws0050/include/proc/proc.h
@@ -0,0 +1,18 @@
+/* proc.h: MN2WS0050 processor description
+ *
+ * Copyright (C) 2002 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_PROC_PROC_H
+#define _ASM_PROC_PROC_H
+
+#define PROCESSOR_VENDOR_NAME	"Panasonic"
+#define PROCESSOR_MODEL_NAME	"mn2ws0050"
+
+#endif /* _ASM_PROC_PROC_H */
diff --git a/arch/mn10300/proc-mn2ws0050/include/proc/smp-regs.h b/arch/mn10300/proc-mn2ws0050/include/proc/smp-regs.h
new file mode 100644
index 00000000000..22f277fbb4d
--- /dev/null
+++ b/arch/mn10300/proc-mn2ws0050/include/proc/smp-regs.h
@@ -0,0 +1,51 @@
+/* MN10300/AM33v2 Microcontroller SMP registers
+ *
+ * Copyright (C) 2006 Matsushita Electric Industrial Co., Ltd.
+ * All Rights Reserved.
+ * Created:
+ *  13-Nov-2006 MEI Add extended cache and atomic operation register
+ *                  for SMP support.
+ *  23-Feb-2007 MEI Add define for gdbstub SMP.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_PROC_SMP_REGS_H
+#define _ASM_PROC_SMP_REGS_H
+
+#ifdef __KERNEL__
+
+#ifndef __ASSEMBLY__
+#include <linux/types.h>
+#endif
+#include <asm/cpu-regs.h>
+
+/*
+ * Reference to the interrupt controllers of other CPUs
+ */
+#define CROSS_ICR_CPU_SHIFT	16
+
+#define CROSS_GxICR(X, CPU)	__SYSREG(0xc4000000 + (X) * 4 + \
+	((X) >= 64 && (X) < 192) * 0xf00 + ((CPU) << CROSS_ICR_CPU_SHIFT), u16)
+#define CROSS_GxICR_u8(X, CPU)	__SYSREG(0xc4000000 + (X) * 4 +		\
+	(((X) >= 64) && ((X) < 192)) * 0xf00 + ((CPU) << CROSS_ICR_CPU_SHIFT), u8)
+
+/* CPU ID register */
+#define CPUID		__SYSREGC(0xc0000054, u32)
+#define CPUID_MASK	0x00000007	/* CPU ID mask */
+
+/* extended cache control register */
+#define ECHCTR		__SYSREG(0xc0000c20, u32)
+#define ECHCTR_IBCM	0x00000001	/* instruction cache broad cast mask */
+#define ECHCTR_DBCM	0x00000002	/* data cache broad cast mask */
+#define ECHCTR_ISPM	0x00000004	/* instruction cache snoop mask */
+#define ECHCTR_DSPM	0x00000008	/* data cache snoop mask */
+
+#define NMIAGR		__SYSREG(0xd400013c, u16)
+#define NMIAGR_GN	0x03fc
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_PROC_SMP_REGS_H */
diff --git a/arch/mn10300/proc-mn2ws0050/proc-init.c b/arch/mn10300/proc-mn2ws0050/proc-init.c
new file mode 100644
index 00000000000..c58249b9525
--- /dev/null
+++ b/arch/mn10300/proc-mn2ws0050/proc-init.c
@@ -0,0 +1,134 @@
+/* MN2WS0050 processor initialisation
+ *
+ * Copyright (C) 2005 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+
+#include <asm/processor.h>
+#include <asm/system.h>
+#include <asm/uaccess.h>
+#include <asm/io.h>
+#include <asm/atomic.h>
+#include <asm/smp.h>
+#include <asm/pgalloc.h>
+#include <asm/busctl-regs.h>
+#include <unit/timex.h>
+#include <asm/fpu.h>
+#include <asm/rtc.h>
+
+#define MEMCONF __SYSREGC(0xdf800400, u32)
+
+/*
+ * initialise the on-silicon processor peripherals
+ */
+asmlinkage void __init processor_init(void)
+{
+	int loop;
+
+	/* set up the exception table first */
+	for (loop = 0x000; loop < 0x400; loop += 8)
+		__set_intr_stub(loop, __common_exception);
+
+	__set_intr_stub(EXCEP_ITLBMISS,		itlb_miss);
+	__set_intr_stub(EXCEP_DTLBMISS,		dtlb_miss);
+	__set_intr_stub(EXCEP_IAERROR,		itlb_aerror);
+	__set_intr_stub(EXCEP_DAERROR,		dtlb_aerror);
+	__set_intr_stub(EXCEP_BUSERROR,		raw_bus_error);
+	__set_intr_stub(EXCEP_DOUBLE_FAULT,	double_fault);
+	__set_intr_stub(EXCEP_FPU_DISABLED,	fpu_disabled);
+	__set_intr_stub(EXCEP_SYSCALL0,		system_call);
+
+	__set_intr_stub(EXCEP_NMI,		nmi_handler);
+	__set_intr_stub(EXCEP_WDT,		nmi_handler);
+	__set_intr_stub(EXCEP_IRQ_LEVEL0,	irq_handler);
+	__set_intr_stub(EXCEP_IRQ_LEVEL1,	irq_handler);
+	__set_intr_stub(EXCEP_IRQ_LEVEL2,	irq_handler);
+	__set_intr_stub(EXCEP_IRQ_LEVEL3,	irq_handler);
+	__set_intr_stub(EXCEP_IRQ_LEVEL4,	irq_handler);
+	__set_intr_stub(EXCEP_IRQ_LEVEL5,	irq_handler);
+	__set_intr_stub(EXCEP_IRQ_LEVEL6,	irq_handler);
+
+	IVAR0 = EXCEP_IRQ_LEVEL0;
+	IVAR1 = EXCEP_IRQ_LEVEL1;
+	IVAR2 = EXCEP_IRQ_LEVEL2;
+	IVAR3 = EXCEP_IRQ_LEVEL3;
+	IVAR4 = EXCEP_IRQ_LEVEL4;
+	IVAR5 = EXCEP_IRQ_LEVEL5;
+	IVAR6 = EXCEP_IRQ_LEVEL6;
+
+#ifndef CONFIG_MN10300_HAS_CACHE_SNOOP
+	mn10300_dcache_flush_inv();
+	mn10300_icache_inv();
+#endif
+
+	/* disable all interrupts and set to priority 6 (lowest) */
+#ifdef	CONFIG_SMP
+	for (loop = 0; loop < GxICR_NUM_IRQS; loop++)
+		GxICR(loop) = GxICR_LEVEL_6 | GxICR_DETECT;
+#else	/* !CONFIG_SMP */
+	for (loop = 0; loop < NR_IRQS; loop++)
+		GxICR(loop) = GxICR_LEVEL_6 | GxICR_DETECT;
+#endif	/* !CONFIG_SMP */
+
+	/* clear the timers */
+	TM0MD	= 0;
+	TM1MD	= 0;
+	TM2MD	= 0;
+	TM3MD	= 0;
+	TM4MD	= 0;
+	TM5MD	= 0;
+	TM6MD	= 0;
+	TM6MDA	= 0;
+	TM6MDB	= 0;
+	TM7MD	= 0;
+	TM8MD	= 0;
+	TM9MD	= 0;
+	TM10MD	= 0;
+	TM11MD	= 0;
+	TM12MD	= 0;
+	TM13MD	= 0;
+	TM14MD	= 0;
+	TM15MD	= 0;
+
+	calibrate_clock();
+}
+
+/*
+ * determine the memory size and base from the memory controller regs
+ */
+void __init get_mem_info(unsigned long *mem_base, unsigned long *mem_size)
+{
+	unsigned long memconf = MEMCONF;
+	unsigned long size = 0; /* order: MByte */
+
+	*mem_base = 0x90000000; /* fixed address */
+
+	switch (memconf & 0x00000003) {
+	case 0x01:
+		size = 256 / 8;		/* 256 Mbit per chip */
+		break;
+	case 0x02:
+		size = 512 / 8;		/* 512 Mbit per chip */
+		break;
+	case 0x03:
+		size = 1024 / 8;	/*   1 Gbit per chip */
+		break;
+	default:
+		panic("Invalid SDRAM size");
+		break;
+	}
+
+	printk(KERN_INFO "DDR2-SDRAM: %luMB x 2 @%08lx\n", size, *mem_base);
+
+	*mem_size = (size * 2) << 20;
+}