Merge branch 'master' into for-next

Fast-forwarded to current state of Linus' tree as there are patches to be
applied for files that didn't exist on the old branch.

48 files changed, 2080 insertions, 803 deletions

diff --git a/arch/mn10300/Kconfig b/arch/mn10300/Kconfig
index 243bfa23fd5..feaf09cc863 100644
--- a/arch/mn10300/Kconfig
+++ b/arch/mn10300/Kconfig
@@ -1,7 +1,10 @@
 config MN10300
 	def_bool y
 	select HAVE_OPROFILE
-	select GENERIC_HARDIRQS
+	select HAVE_GENERIC_HARDIRQS
+	select GENERIC_IRQ_SHOW
+	select HAVE_ARCH_TRACEHOOK
+	select HAVE_ARCH_KGDB
 
 config AM33_2
 	def_bool n
@@ -53,21 +56,6 @@ config GENERIC_TIME
 config GENERIC_CLOCKEVENTS
 	def_bool y
 
-config GENERIC_CLOCKEVENTS_BUILD
-	def_bool y
-	depends on GENERIC_CLOCKEVENTS
-
-config GENERIC_CLOCKEVENTS_BROADCAST
-	bool
-
-config CEVT_MN10300
-       def_bool y
-       depends on GENERIC_CLOCKEVENTS
-
-config CSRC_MN10300
-       def_bool y
-       depends on GENERIC_TIME
-
 config GENERIC_BUG
 	def_bool y
 
@@ -415,9 +403,9 @@ comment "[!] NOTE: A lower number/level indicates a higher priority (0 is highes
 comment "____Non-maskable interrupt levels____"
 comment "The following must be set to a higher priority than local_irq_disable() and on-chip serial"
 
-config GDBSTUB_IRQ_LEVEL
-	int "GDBSTUB interrupt priority"
-	depends on GDBSTUB
+config DEBUGGER_IRQ_LEVEL
+	int "DEBUGGER interrupt priority"
+	depends on KERNEL_DEBUGGER
 	range 0 1 if LINUX_CLI_LEVEL = 2
 	range 0 2 if LINUX_CLI_LEVEL = 3
 	range 0 3 if LINUX_CLI_LEVEL = 4
@@ -451,7 +439,7 @@ config LINUX_CLI_LEVEL
 	  EPSW.IM from 7.  Any interrupt is permitted for which the level is
 	  lower than EPSW.IM.
 
-	  Certain interrupts, such as GDBSTUB and virtual MN10300 on-chip
+	  Certain interrupts, such as DEBUGGER and virtual MN10300 on-chip
 	  serial DMA interrupts are allowed to interrupt normal disabled
 	  sections.
 
diff --git a/arch/mn10300/Kconfig.debug b/arch/mn10300/Kconfig.debug
index ce83c74b3fd..bdbfd444a9f 100644
--- a/arch/mn10300/Kconfig.debug
+++ b/arch/mn10300/Kconfig.debug
@@ -36,7 +36,7 @@ config KPROBES
 
 config GDBSTUB
 	bool "Remote GDB kernel debugging"
-	depends on DEBUG_KERNEL
+	depends on DEBUG_KERNEL && DEPRECATED
 	select DEBUG_INFO
 	select FRAME_POINTER
 	help
@@ -46,6 +46,9 @@ config GDBSTUB
 	  RAM to avoid excessive linking time. This is only useful for kernel
 	  hackers. If unsure, say N.
 
+	  This is deprecated in favour of KGDB and will be removed in a later
+	  version.
+
 config GDBSTUB_IMMEDIATE
 	bool "Break into GDB stub immediately"
 	depends on GDBSTUB
@@ -54,6 +57,14 @@ config GDBSTUB_IMMEDIATE
 	  possible, leaving the program counter at the beginning of
 	  start_kernel() in init/main.c.
 
+config GDBSTUB_ALLOW_SINGLE_STEP
+	bool "Allow software single-stepping in GDB stub"
+	depends on GDBSTUB && !SMP && !PREEMPT
+	help
+	  Allow GDB stub to perform software single-stepping through the
+	  kernel.  This doesn't work very well on SMP or preemptible kernels as
+	  it uses temporary breakpoints to emulate single-stepping.
+
 config GDB_CONSOLE
 	bool "Console output to GDB"
 	depends on GDBSTUB
@@ -142,3 +153,7 @@ config GDBSTUB_ON_TTYSx
 	default y
 
 endmenu
+
+config KERNEL_DEBUGGER
+	def_bool y
+	depends on GDBSTUB || KGDB
diff --git a/arch/mn10300/include/asm/bitops.h b/arch/mn10300/include/asm/bitops.h
index 3b8a868188f..0939462967e 100644
--- a/arch/mn10300/include/asm/bitops.h
+++ b/arch/mn10300/include/asm/bitops.h
@@ -233,8 +233,7 @@ int ffs(int x)
 #define ext2_clear_bit_atomic(lock, nr, addr) \
 	test_and_clear_bit((nr), (addr))
 
-#include <asm-generic/bitops/ext2-non-atomic.h>
-#include <asm-generic/bitops/minix-le.h>
+#include <asm-generic/bitops/le.h>
 
 #endif /* __KERNEL__ */
 #endif /* __ASM_BITOPS_H */
diff --git a/arch/mn10300/include/asm/cpu-regs.h b/arch/mn10300/include/asm/cpu-regs.h
index 90ed4a365c9..c54effae220 100644
--- a/arch/mn10300/include/asm/cpu-regs.h
+++ b/arch/mn10300/include/asm/cpu-regs.h
@@ -49,7 +49,7 @@ asm(" .am33_2\n");
 #define EPSW_IM_6		0x00000600	/* interrupt mode 6 */
 #define EPSW_IM_7		0x00000700	/* interrupt mode 7 */
 #define EPSW_IE			0x00000800	/* interrupt enable */
-#define EPSW_S			0x00003000	/* software auxilliary bits */
+#define EPSW_S			0x00003000	/* software auxiliary bits */
 #define EPSW_T			0x00008000	/* trace enable */
 #define EPSW_nSL		0x00010000	/* not supervisor level */
 #define EPSW_NMID		0x00020000	/* nonmaskable interrupt disable */
diff --git a/arch/mn10300/include/asm/debugger.h b/arch/mn10300/include/asm/debugger.h
new file mode 100644
index 00000000000..e1d3b083696
--- /dev/null
+++ b/arch/mn10300/include/asm/debugger.h
@@ -0,0 +1,43 @@
+/* Kernel debugger for MN10300
+ *
+ * Copyright (C) 2011 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_DEBUGGER_H
+#define _ASM_DEBUGGER_H
+
+#if defined(CONFIG_KERNEL_DEBUGGER)
+
+extern int debugger_intercept(enum exception_code, int, int, struct pt_regs *);
+extern int at_debugger_breakpoint(struct pt_regs *);
+
+#ifndef CONFIG_MN10300_DEBUGGER_CACHE_NO_FLUSH
+extern void debugger_local_cache_flushinv(void);
+extern void debugger_local_cache_flushinv_one(u8 *);
+#else
+static inline void debugger_local_cache_flushinv(void) {}
+static inline void debugger_local_cache_flushinv_one(u8 *addr) {}
+#endif
+
+#else /* CONFIG_KERNEL_DEBUGGER */
+
+static inline int debugger_intercept(enum exception_code excep,
+				     int signo, int si_code,
+				     struct pt_regs *regs)
+{
+	return 0;
+}
+
+static inline int at_debugger_breakpoint(struct pt_regs *regs)
+{
+	return 0;
+}
+
+#endif /* CONFIG_KERNEL_DEBUGGER */
+#endif /* _ASM_DEBUGGER_H */
diff --git a/arch/mn10300/include/asm/div64.h b/arch/mn10300/include/asm/div64.h
index 34dcb8e6830..503efab2a51 100644
--- a/arch/mn10300/include/asm/div64.h
+++ b/arch/mn10300/include/asm/div64.h
@@ -16,6 +16,19 @@
 extern void ____unhandled_size_in_do_div___(void);
 
 /*
+ * Beginning with gcc 4.6, the MDR register is represented explicitly.  We
+ * must, therefore, at least explicitly clobber the register when we make
+ * changes to it.  The following assembly fragments *could* be rearranged in
+ * order to leave the moves to/from the MDR register to the compiler, but the
+ * gains would be minimal at best.
+ */
+#if __GNUC__ > 4 || (__GNUC__ == 4 && __GNUC_MINOR__ >= 6)
+# define CLOBBER_MDR_CC		"mdr", "cc"
+#else
+# define CLOBBER_MDR_CC		"cc"
+#endif
+
+/*
  * divide n by base, leaving the result in n and returning the remainder
  * - we can do this quite efficiently on the MN10300 by cascading the divides
  *   through the MDR register
@@ -29,7 +42,7 @@ extern void ____unhandled_size_in_do_div___(void);
 		    "mov	mdr,%1	\n"				\
 		    : "+r"(n), "=d"(__rem)				\
 		    : "r"(base), "1"(__rem)				\
-		    : "cc"						\
+		    : CLOBBER_MDR_CC					\
 		    );							\
 	} else if (sizeof(n) <= 8) {					\
 		union {							\
@@ -48,7 +61,7 @@ extern void ____unhandled_size_in_do_div___(void);
 		    : "=d"(__rem), "=r"(__quot.w[1]), "=r"(__quot.w[0])	\
 		    : "r"(base), "0"(__rem), "1"(__quot.w[1]),		\
 		      "2"(__quot.w[0])					\
-		    : "cc"						\
+		    : CLOBBER_MDR_CC					\
 		    );							\
 		n = __quot.l;						\
 	} else {							\
@@ -72,7 +85,7 @@ unsigned __muldiv64u(unsigned val, unsigned mult, unsigned div)
 					 * MDR = MDR:val%div */
 	    : "=r"(result)
 	    : "0"(val), "ir"(mult), "r"(div)
-	    : "cc"
+	    : CLOBBER_MDR_CC
 	    );
 
 	return result;
@@ -93,7 +106,7 @@ signed __muldiv64s(signed val, signed mult, signed div)
 					 * MDR = MDR:val%div */
 	    : "=r"(result)
 	    : "0"(val), "ir"(mult), "r"(div)
-	    : "cc"
+	    : CLOBBER_MDR_CC
 	    );
 
 	return result;
diff --git a/arch/mn10300/include/asm/fpu.h b/arch/mn10300/include/asm/fpu.h
index b7625de8ead..738ff72659d 100644
--- a/arch/mn10300/include/asm/fpu.h
+++ b/arch/mn10300/include/asm/fpu.h
@@ -55,7 +55,6 @@ static inline void clear_using_fpu(struct task_struct *tsk)
 
 extern asmlinkage void fpu_kill_state(struct task_struct *);
 extern asmlinkage void fpu_exception(struct pt_regs *, enum exception_code);
-extern asmlinkage void fpu_invalid_op(struct pt_regs *, enum exception_code);
 extern asmlinkage void fpu_init_state(void);
 extern asmlinkage void fpu_save(struct fpu_state_struct *);
 extern int fpu_setup_sigcontext(struct fpucontext *buf);
@@ -113,7 +112,6 @@ static inline void flush_fpu(void)
 
 extern asmlinkage
 void unexpected_fpu_exception(struct pt_regs *, enum exception_code);
-#define fpu_invalid_op unexpected_fpu_exception
 #define fpu_exception unexpected_fpu_exception
 
 struct task_struct;
diff --git a/arch/mn10300/include/asm/intctl-regs.h b/arch/mn10300/include/asm/intctl-regs.h
index 585b708c2bc..d65bbeebe50 100644
--- a/arch/mn10300/include/asm/intctl-regs.h
+++ b/arch/mn10300/include/asm/intctl-regs.h
@@ -60,11 +60,6 @@
 
 #ifndef __ASSEMBLY__
 extern void set_intr_level(int irq, u16 level);
-extern void mn10300_intc_set_level(unsigned int irq, unsigned int level);
-extern void mn10300_intc_clear(unsigned int irq);
-extern void mn10300_intc_set(unsigned int irq);
-extern void mn10300_intc_enable(unsigned int irq);
-extern void mn10300_intc_disable(unsigned int irq);
 extern void mn10300_set_lateack_irq_type(int irq);
 #endif
 
diff --git a/arch/mn10300/include/asm/irqflags.h b/arch/mn10300/include/asm/irqflags.h
index 7a7ae12c711..678f68d5f37 100644
--- a/arch/mn10300/include/asm/irqflags.h
+++ b/arch/mn10300/include/asm/irqflags.h
@@ -20,7 +20,7 @@
 /*
  * interrupt control
  * - "disabled": run in IM1/2
- *   - level 0 - GDB stub
+ *   - level 0 - kernel debugger
  *   - level 1 - virtual serial DMA (if present)
  *   - level 5 - normal interrupt priority
  *   - level 6 - timer interrupt
diff --git a/arch/mn10300/include/asm/kgdb.h b/arch/mn10300/include/asm/kgdb.h
new file mode 100644
index 00000000000..eb245f18a70
--- /dev/null
+++ b/arch/mn10300/include/asm/kgdb.h
@@ -0,0 +1,81 @@
+/* Kernel debugger for MN10300
+ *
+ * Copyright (C) 2010 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_KGDB_H
+#define _ASM_KGDB_H
+
+/*
+ * BUFMAX defines the maximum number of characters in inbound/outbound
+ * buffers at least NUMREGBYTES*2 are needed for register packets
+ * Longer buffer is needed to list all threads
+ */
+#define BUFMAX			1024
+
+/*
+ * Note that this register image is in a different order than the register
+ * image that Linux produces at interrupt time.
+ */
+enum regnames {
+	GDB_FR_D0		= 0,
+	GDB_FR_D1		= 1,
+	GDB_FR_D2		= 2,
+	GDB_FR_D3		= 3,
+	GDB_FR_A0		= 4,
+	GDB_FR_A1		= 5,
+	GDB_FR_A2		= 6,
+	GDB_FR_A3		= 7,
+
+	GDB_FR_SP		= 8,
+	GDB_FR_PC		= 9,
+	GDB_FR_MDR		= 10,
+	GDB_FR_EPSW		= 11,
+	GDB_FR_LIR		= 12,
+	GDB_FR_LAR		= 13,
+	GDB_FR_MDRQ		= 14,
+
+	GDB_FR_E0		= 15,
+	GDB_FR_E1		= 16,
+	GDB_FR_E2		= 17,
+	GDB_FR_E3		= 18,
+	GDB_FR_E4		= 19,
+	GDB_FR_E5		= 20,
+	GDB_FR_E6		= 21,
+	GDB_FR_E7		= 22,
+
+	GDB_FR_SSP		= 23,
+	GDB_FR_MSP		= 24,
+	GDB_FR_USP		= 25,
+	GDB_FR_MCRH		= 26,
+	GDB_FR_MCRL		= 27,
+	GDB_FR_MCVF		= 28,
+
+	GDB_FR_FPCR		= 29,
+	GDB_FR_DUMMY0		= 30,
+	GDB_FR_DUMMY1		= 31,
+
+	GDB_FR_FS0		= 32,
+
+	GDB_FR_SIZE		= 64,
+};
+
+#define GDB_ORIG_D0		41
+#define NUMREGBYTES		(GDB_FR_SIZE*4)
+
+static inline void arch_kgdb_breakpoint(void)
+{
+	asm(".globl __arch_kgdb_breakpoint; __arch_kgdb_breakpoint: break");
+}
+extern u8 __arch_kgdb_breakpoint;
+
+#define BREAK_INSTR_SIZE	1
+#define CACHE_FLUSH_IS_SAFE	1
+
+#endif /* _ASM_KGDB_H */
diff --git a/arch/mn10300/include/asm/smp.h b/arch/mn10300/include/asm/smp.h
index a3930e43a95..6745dbe6494 100644
--- a/arch/mn10300/include/asm/smp.h
+++ b/arch/mn10300/include/asm/smp.h
@@ -34,7 +34,7 @@
 #define LOCAL_TIMER_IPI		193
 #define FLUSH_CACHE_IPI		194
 #define CALL_FUNCTION_NMI_IPI	195
-#define GDB_NMI_IPI		196
+#define DEBUGGER_NMI_IPI	196
 
 #define SMP_BOOT_IRQ		195
 
@@ -43,6 +43,7 @@
 #define LOCAL_TIMER_GxICR_LV	GxICR_LEVEL_4
 #define FLUSH_CACHE_GxICR_LV	GxICR_LEVEL_0
 #define SMP_BOOT_GxICR_LV	GxICR_LEVEL_0
+#define DEBUGGER_GxICR_LV	CONFIG_DEBUGGER_IRQ_LEVEL
 
 #define TIME_OUT_COUNT_BOOT_IPI	100
 #define DELAY_TIME_BOOT_IPI	75000
@@ -61,8 +62,9 @@
  * An alternate way of dealing with this could be to use the EPSW.S bits to
  * cache this information for systems with up to four CPUs.
  */
+#define arch_smp_processor_id()	(CPUID)
 #if 0
-#define raw_smp_processor_id()	(CPUID)
+#define raw_smp_processor_id()	(arch_smp_processor_id())
 #else
 #define raw_smp_processor_id()	(current_thread_info()->cpu)
 #endif
diff --git a/arch/mn10300/include/asm/thread_info.h b/arch/mn10300/include/asm/thread_info.h
index aa07a4a5d79..87c213002d4 100644
--- a/arch/mn10300/include/asm/thread_info.h
+++ b/arch/mn10300/include/asm/thread_info.h
@@ -124,12 +124,18 @@ static inline unsigned long current_stack_pointer(void)
 
 /* thread information allocation */
 #ifdef CONFIG_DEBUG_STACK_USAGE
-#define alloc_thread_info(tsk) kzalloc(THREAD_SIZE, GFP_KERNEL)
+#define alloc_thread_info_node(tsk, node)			\
+		kzalloc_node(THREAD_SIZE, GFP_KERNEL, node)
 #else
-#define alloc_thread_info(tsk) kmalloc(THREAD_SIZE, GFP_KERNEL)
+#define alloc_thread_info_node(tsk, node)			\
+		kmalloc_node(THREAD_SIZE, GFP_KERNEL, node)
 #endif
 
+#ifndef CONFIG_KGDB
 #define free_thread_info(ti)	kfree((ti))
+#else
+extern void free_thread_info(struct thread_info *);
+#endif
 #define get_thread_info(ti)	get_task_struct((ti)->task)
 #define put_thread_info(ti)	put_task_struct((ti)->task)
 
diff --git a/arch/mn10300/include/asm/types.h b/arch/mn10300/include/asm/types.h
index 7b9f01042fd..c1833eb192e 100644
--- a/arch/mn10300/include/asm/types.h
+++ b/arch/mn10300/include/asm/types.h
@@ -26,13 +26,6 @@ typedef unsigned short umode_t;
 
 #define BITS_PER_LONG 32
 
-#ifndef __ASSEMBLY__
-
-/* Dma addresses are 32-bits wide.  */
-typedef u32 dma_addr_t;
-
-#endif /* __ASSEMBLY__ */
-
 #endif /* __KERNEL__ */
 
 #endif /* _ASM_TYPES_H */
diff --git a/arch/mn10300/kernel/Makefile b/arch/mn10300/kernel/Makefile
index 8f5f1e81baf..47ed30fe817 100644
--- a/arch/mn10300/kernel/Makefile
+++ b/arch/mn10300/kernel/Makefile
@@ -8,7 +8,8 @@ fpu-obj-$(CONFIG_FPU) := fpu.o fpu-low.o
 
 obj-y   := process.o signal.o entry.o traps.o irq.o \
 	   ptrace.o setup.o time.o sys_mn10300.o io.o kthread.o \
-	   switch_to.o mn10300_ksyms.o kernel_execve.o $(fpu-obj-y)
+	   switch_to.o mn10300_ksyms.o kernel_execve.o $(fpu-obj-y) \
+	   csrc-mn10300.o cevt-mn10300.o
 
 obj-$(CONFIG_SMP) += smp.o smp-low.o
 
@@ -20,13 +21,8 @@ obj-$(CONFIG_GDBSTUB) += gdb-stub.o gdb-low.o
 obj-$(CONFIG_GDBSTUB_ON_TTYSx) += gdb-io-serial.o gdb-io-serial-low.o
 obj-$(CONFIG_GDBSTUB_ON_TTYSMx) += gdb-io-ttysm.o gdb-io-ttysm-low.o
 
-ifeq ($(CONFIG_MN10300_CACHE_ENABLED),y)
-obj-$(CONFIG_GDBSTUB) += gdb-cache.o
-endif
-
 obj-$(CONFIG_MN10300_RTC) += rtc.o
 obj-$(CONFIG_PROFILE) += profile.o profile-low.o
 obj-$(CONFIG_MODULES) += module.o
 obj-$(CONFIG_KPROBES) += kprobes.o
-obj-$(CONFIG_CSRC_MN10300) += csrc-mn10300.o
-obj-$(CONFIG_CEVT_MN10300) += cevt-mn10300.o
+obj-$(CONFIG_KGDB) += kgdb.o
diff --git a/arch/mn10300/kernel/cevt-mn10300.c b/arch/mn10300/kernel/cevt-mn10300.c
index d4cb535bf78..69cae026078 100644
--- a/arch/mn10300/kernel/cevt-mn10300.c
+++ b/arch/mn10300/kernel/cevt-mn10300.c
@@ -89,9 +89,10 @@ int __init init_clockevents(void)
 	cd->name		= "Timestamp";
 	cd->features		= CLOCK_EVT_FEAT_ONESHOT;
 
-	/* Calculate the min / max delta */
-	clockevent_set_clock(cd, MN10300_JCCLK);
+	/* Calculate shift/mult. We want to spawn at least 1 second */
+	clockevents_calc_mult_shift(cd, MN10300_JCCLK, 1);
 
+	/* Calculate the min / max delta */
 	cd->max_delta_ns	= clockevent_delta2ns(TMJCBR_MAX, cd);
 	cd->min_delta_ns	= clockevent_delta2ns(100, cd);
 
@@ -110,9 +111,9 @@ int __init init_clockevents(void)
 #if defined(CONFIG_SMP) && !defined(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST)
 	/* setup timer irq affinity so it only runs on this cpu */
 	{
-		struct irq_desc *desc;
-		desc = irq_to_desc(cd->irq);
-		cpumask_copy(desc->affinity, cpumask_of(cpu));
+		struct irq_data *data;
+		data = irq_get_irq_data(cd->irq);
+		cpumask_copy(data->affinity, cpumask_of(cpu));
 		iact->flags |= IRQF_NOBALANCING;
 	}
 #endif
diff --git a/arch/mn10300/kernel/csrc-mn10300.c b/arch/mn10300/kernel/csrc-mn10300.c
index ba2f0c4d6e0..45644cf18c4 100644
--- a/arch/mn10300/kernel/csrc-mn10300.c
+++ b/arch/mn10300/kernel/csrc-mn10300.c
@@ -29,7 +29,6 @@ static struct clocksource clocksource_mn10300 = {
 int __init init_clocksource(void)
 {
 	startup_timestamp_counter();
-	clocksource_set_clock(&clocksource_mn10300, MN10300_TSCCLK);
-	clocksource_register(&clocksource_mn10300);
+	clocksource_register_hz(&clocksource_mn10300, MN10300_TSCCLK);
 	return 0;
 }
diff --git a/arch/mn10300/kernel/entry.S b/arch/mn10300/kernel/entry.S
index f00b9bafcd3..fb93ad720b8 100644
--- a/arch/mn10300/kernel/entry.S
+++ b/arch/mn10300/kernel/entry.S
@@ -266,7 +266,11 @@ ENTRY(raw_bus_error)
 
 ###############################################################################
 #
-# Miscellaneous exception entry points
+# NMI exception entry points
+#
+# This is used by ordinary interrupt channels that have the GxICR_NMI bit set
+# in addition to the main NMI and Watchdog channels.  SMP NMI IPIs use this
+# facility.
 #
 ###############################################################################
 ENTRY(nmi_handler)
@@ -281,7 +285,7 @@ ENTRY(nmi_handler)
 	and	NMIAGR_GN,d0
 	lsr	0x2,d0
 	cmp	CALL_FUNCTION_NMI_IPI,d0
-	bne	5f			# if not call function, jump
+	bne	nmi_not_smp_callfunc	# if not call function, jump
 
 	# function call nmi ipi
 	add	4,sp			# no need to store TBR
@@ -295,59 +299,38 @@ ENTRY(nmi_handler)
 	call	smp_nmi_call_function_interrupt[],0
 	RESTORE_ALL
 
-5:
-#ifdef CONFIG_GDBSTUB
-	cmp	GDB_NMI_IPI,d0
-	bne	3f			# if not gdb nmi ipi, jump
+nmi_not_smp_callfunc:
+#ifdef CONFIG_KERNEL_DEBUGGER
+	cmp	DEBUGGER_NMI_IPI,d0
+	bne	nmi_not_debugger	# if not kernel debugger NMI IPI, jump
 
-	# gdb nmi ipi
+	# kernel debugger NMI IPI
 	add	4,sp			# no need to store TBR
 	mov	GxICR_DETECT,d0		# clear NMI
-	movbu	d0,(GxICR(GDB_NMI_IPI))
-	movhu	(GxICR(GDB_NMI_IPI)),d0
+	movbu	d0,(GxICR(DEBUGGER_NMI_IPI))
+	movhu	(GxICR(DEBUGGER_NMI_IPI)),d0
 	and	~EPSW_NMID,epsw		# enable NMI
-#ifdef CONFIG_MN10300_CACHE_ENABLED
-	mov	(gdbstub_nmi_opr_type),d0
-	cmp	GDBSTUB_NMI_CACHE_PURGE,d0
-	bne	4f			# if not gdb cache purge, jump
-
-	# gdb cache purge nmi ipi
-	add	-20,sp
-	mov	d1,(4,sp)
-	mov	a0,(8,sp)
-	mov	a1,(12,sp)
-	mov	mdr,d0
-	mov	d0,(16,sp)
-	call	gdbstub_local_purge_cache[],0
-	mov	0x1,d0
-	mov	(CPUID),d1
-	asl	d1,d0
-	mov	gdbstub_nmi_cpumask,a0
-	bclr	d0,(a0)
-	mov	(4,sp),d1
-	mov	(8,sp),a0
-	mov	(12,sp),a1
-	mov	(16,sp),d0
-	mov	d0,mdr
-	add	20,sp
-	mov	(sp),d0
-	add	4,sp
-	rti
-4:
-#endif /* CONFIG_MN10300_CACHE_ENABLED */
-	# gdb wait nmi ipi
+
 	mov     (sp),d0
 	SAVE_ALL
-	call    gdbstub_nmi_wait[],0
+	mov	fp,d0			# arg 0: stacked register file
+	mov	a2,d1			# arg 1: exception number
+	call    debugger_nmi_interrupt[],0
 	RESTORE_ALL
-3:
-#endif /* CONFIG_GDBSTUB */
+
+nmi_not_debugger:
+#endif /* CONFIG_KERNEL_DEBUGGER */
 	mov     (sp),d0                 # restore TBR to d0
 	add     4,sp
 #endif /* CONFIG_SMP */
 
 	bra	__common_exception_nonmi
 
+###############################################################################
+#
+# General exception entry point
+#
+###############################################################################
 ENTRY(__common_exception)
 	add	-4,sp
 	mov	d0,(sp)
diff --git a/arch/mn10300/kernel/fpu.c b/arch/mn10300/kernel/fpu.c
index 5f9c3fa19a8..bb5fa7df6c4 100644
--- a/arch/mn10300/kernel/fpu.c
+++ b/arch/mn10300/kernel/fpu.c
@@ -70,24 +70,6 @@ asmlinkage void fpu_exception(struct pt_regs *regs, enum exception_code code)
 }
 
 /*
- * handle an FPU invalid_op exception
- * - Derived from DO_EINFO() macro in arch/mn10300/kernel/traps.c
- */
-asmlinkage void fpu_invalid_op(struct pt_regs *regs, enum exception_code code)
-{
-	siginfo_t info;
-
-	if (!user_mode(regs))
-		die_if_no_fixup("FPU invalid opcode", regs, code);
-
-	info.si_signo = SIGILL;
-	info.si_errno = 0;
-	info.si_code = ILL_COPROC;
-	info.si_addr = (void *) regs->pc;
-	force_sig_info(info.si_signo, &info, current);
-}
-
-/*
  * save the FPU state to a signal context
  */
 int fpu_setup_sigcontext(struct fpucontext *fpucontext)
diff --git a/arch/mn10300/kernel/gdb-cache.S b/arch/mn10300/kernel/gdb-cache.S
deleted file mode 100644
index 1108badc3d3..00000000000
--- a/arch/mn10300/kernel/gdb-cache.S
+++ /dev/null
@@ -1,105 +0,0 @@
-###############################################################################
-#
-# MN10300 Low-level cache purging routines for gdbstub
-#
-# Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
-# Written by David Howells (dhowells@redhat.com)
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public Licence
-# as published by the Free Software Foundation; either version
-# 2 of the Licence, or (at your option) any later version.
-#
-###############################################################################
-#include <linux/sys.h>
-#include <linux/linkage.h>
-#include <asm/smp.h>
-#include <asm/cache.h>
-#include <asm/cpu-regs.h>
-#include <asm/exceptions.h>
-#include <asm/frame.inc>
-#include <asm/serial-regs.h>
-
-	.text
-
-###############################################################################
-#
-# GDB stub cache purge
-#
-###############################################################################
-	.type	gdbstub_purge_cache,@function
-ENTRY(gdbstub_purge_cache)
-	#######################################################################
-	# read the addresses tagged in the cache's tag RAM and attempt to flush
-	# those addresses specifically
-	# - we rely on the hardware to filter out invalid tag entry addresses
-	mov	DCACHE_TAG(0,0),a0		# dcache tag RAM access address
-	mov	DCACHE_PURGE(0,0),a1		# dcache purge request address
-	mov	L1_CACHE_NWAYS*L1_CACHE_NENTRIES,d1  # total number of entries
-
-mn10300_dcache_flush_loop:
-	mov	(a0),d0
-	and	L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d0
-	or	L1_CACHE_TAG_VALID,d0		# retain valid entries in the
-						# cache
-	mov	d0,(a1)				# conditional purge
-
-mn10300_dcache_flush_skip:
-	add	L1_CACHE_BYTES,a0
-	add	L1_CACHE_BYTES,a1
-	add	-1,d1
-	bne	mn10300_dcache_flush_loop
-
-;; 	# unconditionally flush and invalidate the dcache
-;; 	mov	DCACHE_PURGE(0,0),a1		# dcache purge request address
-;; 	mov	L1_CACHE_NWAYS*L1_CACHE_NENTRIES,d1	# total number of
-;;							# entries
-;;
-;; gdbstub_purge_cache__dcache_loop:
-;; 	mov	(a1),d0				# unconditional purge
-;;
-;; 	add	L1_CACHE_BYTES,a1
-;; 	add	-1,d1
-;; 	bne	gdbstub_purge_cache__dcache_loop
-
-	#######################################################################
-	# now invalidate the icache
-	mov	CHCTR,a0
-	movhu	(a0),a1
-
-	mov	epsw,d1
-	and	~EPSW_IE,epsw
-	nop
-	nop
-
-	# disable the icache
-	and	~CHCTR_ICEN,d0
-	movhu	d0,(a0)
-
-	# and wait for it to calm down
-	setlb
-	movhu	(a0),d0
-	btst	CHCTR_ICBUSY,d0
-	lne
-
-	# invalidate
-	or	CHCTR_ICINV,d0
-	movhu	d0,(a0)
-
-	# wait for the cache to finish
-	mov	CHCTR,a0
-	setlb
-	movhu	(a0),d0
-	btst	CHCTR_ICBUSY,d0
-	lne
-
-	# and reenable it
-	movhu	a1,(a0)
-	movhu	(a0),d0			# read back to flush
-					# (SIGILLs all over without this)
-
-	mov	d1,epsw
-
-	ret	[],0
-
-	.size	gdbstub_purge_cache,.-gdbstub_purge_cache
diff --git a/arch/mn10300/kernel/gdb-io-ttysm.c b/arch/mn10300/kernel/gdb-io-ttysm.c
index abdeea153c8..c859cacbb9c 100644
--- a/arch/mn10300/kernel/gdb-io-ttysm.c
+++ b/arch/mn10300/kernel/gdb-io-ttysm.c
@@ -59,10 +59,10 @@ void __init gdbstub_io_init(void)
 
 	/* we want to get serial receive interrupts */
 	set_intr_level(gdbstub_port->rx_irq,
-		NUM2GxICR_LEVEL(CONFIG_GDBSTUB_IRQ_LEVEL));
+		NUM2GxICR_LEVEL(CONFIG_DEBUGGER_IRQ_LEVEL));
 	set_intr_level(gdbstub_port->tx_irq,
-		NUM2GxICR_LEVEL(CONFIG_GDBSTUB_IRQ_LEVEL));
-	set_intr_stub(NUM2EXCEP_IRQ_LEVEL(CONFIG_GDBSTUB_IRQ_LEVEL),
+		NUM2GxICR_LEVEL(CONFIG_DEBUGGER_IRQ_LEVEL));
+	set_intr_stub(NUM2EXCEP_IRQ_LEVEL(CONFIG_DEBUGGER_IRQ_LEVEL),
 		gdbstub_io_rx_handler);
 
 	*gdbstub_port->rx_icr |= GxICR_ENABLE;
@@ -88,7 +88,7 @@ void __init gdbstub_io_init(void)
 
 	/* permit level 0 IRQs only */
 	arch_local_change_intr_mask_level(
-		NUM2EPSW_IM(CONFIG_GDBSTUB_IRQ_LEVEL + 1));
+		NUM2EPSW_IM(CONFIG_DEBUGGER_IRQ_LEVEL + 1));
 }
 
 /*
diff --git a/arch/mn10300/kernel/gdb-stub.c b/arch/mn10300/kernel/gdb-stub.c
index b169d99d9f2..538266b2c9b 100644
--- a/arch/mn10300/kernel/gdb-stub.c
+++ b/arch/mn10300/kernel/gdb-stub.c
@@ -133,7 +133,7 @@
 #include <asm/system.h>
 #include <asm/gdb-stub.h>
 #include <asm/exceptions.h>
-#include <asm/cacheflush.h>
+#include <asm/debugger.h>
 #include <asm/serial-regs.h>
 #include <asm/busctl-regs.h>
 #include <unit/leds.h>
@@ -405,6 +405,7 @@ static int hexToInt(char **ptr, int *intValue)
 	return (numChars);
 }
 
+#ifdef CONFIG_GDBSTUB_ALLOW_SINGLE_STEP
 /*
  * We single-step by setting breakpoints. When an exception
  * is handled, we need to restore the instructions hoisted
@@ -729,6 +730,7 @@ static int gdbstub_single_step(struct pt_regs *regs)
 	__gdbstub_restore_bp();
 	return -EFAULT;
 }
+#endif /* CONFIG_GDBSTUB_ALLOW_SINGLE_STEP */
 
 #ifdef CONFIG_GDBSTUB_CONSOLE
 
@@ -1171,7 +1173,7 @@ int gdbstub_clear_breakpoint(u8 *addr, int len)
 
 /*
  * This function does all command processing for interfacing to gdb
- * - returns 1 if the exception should be skipped, 0 otherwise.
+ * - returns 0 if the exception should be skipped, -ERROR otherwise.
  */
 static int gdbstub(struct pt_regs *regs, enum exception_code excep)
 {
@@ -1186,7 +1188,7 @@ static int gdbstub(struct pt_regs *regs, enum exception_code excep)
 	int loop;
 
 	if (excep == EXCEP_FPU_DISABLED)
-		return 0;
+		return -ENOTSUPP;
 
 	gdbstub_flush_caches = 0;
 
@@ -1195,7 +1197,7 @@ static int gdbstub(struct pt_regs *regs, enum exception_code excep)
 	asm volatile("mov mdr,%0" : "=d"(mdr));
 	local_save_flags(epsw);
 	arch_local_change_intr_mask_level(
-		NUM2EPSW_IM(CONFIG_GDBSTUB_IRQ_LEVEL + 1));
+		NUM2EPSW_IM(CONFIG_DEBUGGER_IRQ_LEVEL + 1));
 
 	gdbstub_store_fpu();
 
@@ -1208,11 +1210,13 @@ static int gdbstub(struct pt_regs *regs, enum exception_code excep)
 	/* if we were single stepping, restore the opcodes hoisted for the
 	 * breakpoint[s] */
 	broke = 0;
+#ifdef CONFIG_GDBSTUB_ALLOW_SINGLE_STEP
 	if ((step_bp[0].addr && step_bp[0].addr == (u8 *) regs->pc) ||
 	    (step_bp[1].addr && step_bp[1].addr == (u8 *) regs->pc))
 		broke = 1;
 
 	__gdbstub_restore_bp();
+#endif
 
 	if (gdbstub_rx_unget) {
 		sigval = SIGINT;
@@ -1548,17 +1552,21 @@ packet_waiting:
 			 * Step to next instruction
 			 */
 		case 's':
-			/*
-			 * using the T flag doesn't seem to perform single
+			/* Using the T flag doesn't seem to perform single
 			 * stepping (it seems to wind up being caught by the
 			 * JTAG unit), so we have to use breakpoints and
 			 * continue instead.
 			 */
+#ifdef CONFIG_GDBSTUB_ALLOW_SINGLE_STEP
 			if (gdbstub_single_step(regs) < 0)
 				/* ignore any fault error for now */
 				gdbstub_printk("unable to set single-step"
 					       " bp\n");
 			goto done;
+#else
+			gdbstub_strcpy(output_buffer, "E01");
+			break;
+#endif
 
 			/*
 			 * Set baud rate (bBB)
@@ -1657,7 +1665,7 @@ done:
 	 * NB: We flush both caches, just to be sure...
 	 */
 	if (gdbstub_flush_caches)
-		gdbstub_purge_cache();
+		debugger_local_cache_flushinv();
 
 	gdbstub_load_fpu();
 	mn10300_set_gdbleds(0);
@@ -1667,14 +1675,23 @@ done:
 	touch_softlockup_watchdog();
 
 	local_irq_restore(epsw);
-	return 1;
+	return 0;
+}
+
+/*
+ * Determine if we hit a debugger special breakpoint that needs skipping over
+ * automatically.
+ */
+int at_debugger_breakpoint(struct pt_regs *regs)
+{
+	return 0;
 }
 
 /*
  * handle event interception
  */
-asmlinkage int gdbstub_intercept(struct pt_regs *regs,
-				 enum exception_code excep)
+asmlinkage int debugger_intercept(enum exception_code excep,
+				  int signo, int si_code, struct pt_regs *regs)
 {
 	static u8 notfirst = 1;
 	int ret;
@@ -1688,7 +1705,7 @@ asmlinkage int gdbstub_intercept(struct pt_regs *regs,
 		asm("mov mdr,%0" : "=d"(mdr));
 
 		gdbstub_entry(
-			"--> gdbstub_intercept(%p,%04x) [MDR=%lx PC=%lx]\n",
+			"--> debugger_intercept(%p,%04x) [MDR=%lx PC=%lx]\n",
 			regs, excep, mdr, regs->pc);
 
 		gdbstub_entry(
@@ -1722,7 +1739,7 @@ asmlinkage int gdbstub_intercept(struct pt_regs *regs,
 
 	ret = gdbstub(regs, excep);
 
-	gdbstub_entry("<-- gdbstub_intercept()\n");
+	gdbstub_entry("<-- debugger_intercept()\n");
 	gdbstub_busy = 0;
 	return ret;
 }
diff --git a/arch/mn10300/kernel/internal.h b/arch/mn10300/kernel/internal.h
index 6a064ab5af0..a5ac755dd69 100644
--- a/arch/mn10300/kernel/internal.h
+++ b/arch/mn10300/kernel/internal.h
@@ -30,16 +30,13 @@ extern void mn10300_low_ipi_handler(void);
 #endif
 
 /*
- * time.c
+ * smp.c
  */
-extern irqreturn_t local_timer_interrupt(void);
+#ifdef CONFIG_SMP
+extern void smp_jump_to_debugger(void);
+#endif
 
 /*
  * time.c
  */
-#ifdef CONFIG_CEVT_MN10300
-extern void clockevent_set_clock(struct clock_event_device *, unsigned int);
-#endif
-#ifdef CONFIG_CSRC_MN10300
-extern void clocksource_set_clock(struct clocksource *, unsigned int);
-#endif
+extern irqreturn_t local_timer_interrupt(void);
diff --git a/arch/mn10300/kernel/irq.c b/arch/mn10300/kernel/irq.c
index ac11754ecec..86af0d7d077 100644
--- a/arch/mn10300/kernel/irq.c
+++ b/arch/mn10300/kernel/irq.c
@@ -37,8 +37,9 @@ atomic_t irq_err_count;
 /*
  * MN10300 interrupt controller operations
  */
-static void mn10300_cpupic_ack(unsigned int irq)
+static void mn10300_cpupic_ack(struct irq_data *d)
 {
+	unsigned int irq = d->irq;
 	unsigned long flags;
 	u16 tmp;
 
@@ -61,13 +62,14 @@ static void __mask_and_set_icr(unsigned int irq,
 	arch_local_irq_restore(flags);
 }
 
-static void mn10300_cpupic_mask(unsigned int irq)
+static void mn10300_cpupic_mask(struct irq_data *d)
 {
-	__mask_and_set_icr(irq, GxICR_LEVEL, 0);
+	__mask_and_set_icr(d->irq, GxICR_LEVEL, 0);
 }
 
-static void mn10300_cpupic_mask_ack(unsigned int irq)
+static void mn10300_cpupic_mask_ack(struct irq_data *d)
 {
+	unsigned int irq = d->irq;
 #ifdef CONFIG_SMP
 	unsigned long flags;
 	u16 tmp;
@@ -85,7 +87,7 @@ static void mn10300_cpupic_mask_ack(unsigned int irq)
 		tmp2 = GxICR(irq);
 
 		irq_affinity_online[irq] =
-			any_online_cpu(*irq_desc[irq].affinity);
+			any_online_cpu(*d->affinity);
 		CROSS_GxICR(irq, irq_affinity_online[irq]) =
 			(tmp & (GxICR_LEVEL | GxICR_ENABLE)) | GxICR_DETECT;
 		tmp = CROSS_GxICR(irq, irq_affinity_online[irq]);
@@ -97,13 +99,14 @@ static void mn10300_cpupic_mask_ack(unsigned int irq)
 #endif /* CONFIG_SMP */
 }
 
-static void mn10300_cpupic_unmask(unsigned int irq)
+static void mn10300_cpupic_unmask(struct irq_data *d)
 {
-	__mask_and_set_icr(irq, GxICR_LEVEL, GxICR_ENABLE);
+	__mask_and_set_icr(d->irq, GxICR_LEVEL, GxICR_ENABLE);
 }
 
-static void mn10300_cpupic_unmask_clear(unsigned int irq)
+static void mn10300_cpupic_unmask_clear(struct irq_data *d)
 {
+	unsigned int irq = d->irq;
 	/* the MN10300 PIC latches its interrupt request bit, even after the
 	 * device has ceased to assert its interrupt line and the interrupt
 	 * channel has been disabled in the PIC, so for level-triggered
@@ -121,7 +124,7 @@ static void mn10300_cpupic_unmask_clear(unsigned int irq)
 	} else {
 		tmp = GxICR(irq);
 
-		irq_affinity_online[irq] = any_online_cpu(*irq_desc[irq].affinity);
+		irq_affinity_online[irq] = any_online_cpu(*d->affinity);
 		CROSS_GxICR(irq, irq_affinity_online[irq]) = (tmp & GxICR_LEVEL) | GxICR_ENABLE | GxICR_DETECT;
 		tmp = CROSS_GxICR(irq, irq_affinity_online[irq]);
 	}
@@ -134,7 +137,8 @@ static void mn10300_cpupic_unmask_clear(unsigned int irq)
 
 #ifdef CONFIG_SMP
 static int
-mn10300_cpupic_setaffinity(unsigned int irq, const struct cpumask *mask)
+mn10300_cpupic_setaffinity(struct irq_data *d, const struct cpumask *mask,
+			   bool force)
 {
 	unsigned long flags;
 	int err;
@@ -142,14 +146,14 @@ mn10300_cpupic_setaffinity(unsigned int irq, const struct cpumask *mask)
 	flags = arch_local_cli_save();
 
 	/* check irq no */
-	switch (irq) {
+	switch (d->irq) {
 	case TMJCIRQ:
 	case RESCHEDULE_IPI:
 	case CALL_FUNC_SINGLE_IPI:
 	case LOCAL_TIMER_IPI:
 	case FLUSH_CACHE_IPI:
 	case CALL_FUNCTION_NMI_IPI:
-	case GDB_NMI_IPI:
+	case DEBUGGER_NMI_IPI:
 #ifdef CONFIG_MN10300_TTYSM0
 	case SC0RXIRQ:
 	case SC0TXIRQ:
@@ -181,7 +185,7 @@ mn10300_cpupic_setaffinity(unsigned int irq, const struct cpumask *mask)
 		break;
 
 	default:
-		set_bit(irq, irq_affinity_request);
+		set_bit(d->irq, irq_affinity_request);
 		err = 0;
 		break;
 	}
@@ -202,15 +206,15 @@ mn10300_cpupic_setaffinity(unsigned int irq, const struct cpumask *mask)
  * mask_ack() is provided), and mask_ack() just masks.
  */
 static struct irq_chip mn10300_cpu_pic_level = {
-	.name		= "cpu_l",
-	.disable	= mn10300_cpupic_mask,
-	.enable		= mn10300_cpupic_unmask_clear,
-	.ack		= NULL,
-	.mask		= mn10300_cpupic_mask,
-	.mask_ack	= mn10300_cpupic_mask,
-	.unmask		= mn10300_cpupic_unmask_clear,
+	.name			= "cpu_l",
+	.irq_disable		= mn10300_cpupic_mask,
+	.irq_enable		= mn10300_cpupic_unmask_clear,
+	.irq_ack		= NULL,
+	.irq_mask		= mn10300_cpupic_mask,
+	.irq_mask_ack		= mn10300_cpupic_mask,
+	.irq_unmask		= mn10300_cpupic_unmask_clear,
 #ifdef CONFIG_SMP
-	.set_affinity	= mn10300_cpupic_setaffinity,
+	.irq_set_affinity	= mn10300_cpupic_setaffinity,
 #endif
 };
 
@@ -220,15 +224,15 @@ static struct irq_chip mn10300_cpu_pic_level = {
  * We use the latch clearing function of the PIC as the 'ACK' function.
  */
 static struct irq_chip mn10300_cpu_pic_edge = {
-	.name		= "cpu_e",
-	.disable	= mn10300_cpupic_mask,
-	.enable		= mn10300_cpupic_unmask,
-	.ack		= mn10300_cpupic_ack,
-	.mask		= mn10300_cpupic_mask,
-	.mask_ack	= mn10300_cpupic_mask_ack,
-	.unmask		= mn10300_cpupic_unmask,
+	.name			= "cpu_e",
+	.irq_disable		= mn10300_cpupic_mask,
+	.irq_enable		= mn10300_cpupic_unmask,
+	.irq_ack		= mn10300_cpupic_ack,
+	.irq_mask		= mn10300_cpupic_mask,
+	.irq_mask_ack		= mn10300_cpupic_mask_ack,
+	.irq_unmask		= mn10300_cpupic_unmask,
 #ifdef CONFIG_SMP
-	.set_affinity	= mn10300_cpupic_setaffinity,
+	.irq_set_affinity	= mn10300_cpupic_setaffinity,
 #endif
 };
 
@@ -252,31 +256,6 @@ void set_intr_level(int irq, u16 level)
 	__mask_and_set_icr(irq, GxICR_ENABLE, level);
 }
 
-void mn10300_intc_set_level(unsigned int irq, unsigned int level)
-{
-	set_intr_level(irq, NUM2GxICR_LEVEL(level) & GxICR_LEVEL);
-}
-
-void mn10300_intc_clear(unsigned int irq)
-{
-	__mask_and_set_icr(irq, GxICR_LEVEL | GxICR_ENABLE, GxICR_DETECT);
-}
-
-void mn10300_intc_set(unsigned int irq)
-{
-	__mask_and_set_icr(irq, 0, GxICR_REQUEST | GxICR_DETECT);
-}
-
-void mn10300_intc_enable(unsigned int irq)
-{
-	mn10300_cpupic_unmask(irq);
-}
-
-void mn10300_intc_disable(unsigned int irq)
-{
-	mn10300_cpupic_mask(irq);
-}
-
 /*
  * mark an interrupt to be ACK'd after interrupt handlers have been run rather
  * than before
@@ -284,7 +263,7 @@ void mn10300_intc_disable(unsigned int irq)
  */
 void mn10300_set_lateack_irq_type(int irq)
 {
-	set_irq_chip_and_handler(irq, &mn10300_cpu_pic_level,
+	irq_set_chip_and_handler(irq, &mn10300_cpu_pic_level,
 				 handle_level_irq);
 }
 
@@ -296,12 +275,12 @@ void __init init_IRQ(void)
 	int irq;
 
 	for (irq = 0; irq < NR_IRQS; irq++)
-		if (irq_desc[irq].chip == &no_irq_chip)
+		if (irq_get_chip(irq) == &no_irq_chip)
 			/* due to the PIC latching interrupt requests, even
 			 * when the IRQ is disabled, IRQ_PENDING is superfluous
 			 * and we can use handle_level_irq() for edge-triggered
 			 * interrupts */
-			set_irq_chip_and_handler(irq, &mn10300_cpu_pic_edge,
+			irq_set_chip_and_handler(irq, &mn10300_cpu_pic_edge,
 						 handle_level_irq);
 
 	unit_init_IRQ();
@@ -356,91 +335,42 @@ asmlinkage void do_IRQ(void)
 /*
  * Display interrupt management information through /proc/interrupts
  */
-int show_interrupts(struct seq_file *p, void *v)
+int arch_show_interrupts(struct seq_file *p, int prec)
 {
-	int i = *(loff_t *) v, j, cpu;
-	struct irqaction *action;
-	unsigned long flags;
-
-	switch (i) {
-		/* display column title bar naming CPUs */
-	case 0:
-		seq_printf(p, "           ");
-		for (j = 0; j < NR_CPUS; j++)
-			if (cpu_online(j))
-				seq_printf(p, "CPU%d       ", j);
-		seq_putc(p, '\n');
-		break;
-
-		/* display information rows, one per active CPU */
-	case 1 ... NR_IRQS - 1:
-		raw_spin_lock_irqsave(&irq_desc[i].lock, flags);
-
-		action = irq_desc[i].action;
-		if (action) {
-			seq_printf(p, "%3d: ", i);
-			for_each_present_cpu(cpu)
-				seq_printf(p, "%10u ", kstat_irqs_cpu(i, cpu));
-
-			if (i < NR_CPU_IRQS)
-				seq_printf(p, " %14s.%u",
-					   irq_desc[i].chip->name,
-					   (GxICR(i) & GxICR_LEVEL) >>
-					   GxICR_LEVEL_SHIFT);
-			else
-				seq_printf(p, " %14s",
-					   irq_desc[i].chip->name);
-
-			seq_printf(p, "  %s", action->name);
-
-			for (action = action->next;
-			     action;
-			     action = action->next)
-				seq_printf(p, ", %s", action->name);
-
-			seq_putc(p, '\n');
-		}
-
-		raw_spin_unlock_irqrestore(&irq_desc[i].lock, flags);
-		break;
-
-		/* polish off with NMI and error counters */
-	case NR_IRQS:
 #ifdef CONFIG_MN10300_WD_TIMER
-		seq_printf(p, "NMI: ");
-		for (j = 0; j < NR_CPUS; j++)
-			if (cpu_online(j))
-				seq_printf(p, "%10u ", nmi_count(j));
-		seq_putc(p, '\n');
-#endif
+	int j;
 
-		seq_printf(p, "ERR: %10u\n", atomic_read(&irq_err_count));
-		break;
-	}
+	seq_printf(p, "%*s: ", prec, "NMI");
+	for (j = 0; j < NR_CPUS; j++)
+		if (cpu_online(j))
+			seq_printf(p, "%10u ", nmi_count(j));
+	seq_putc(p, '\n');
+#endif
 
+	seq_printf(p, "%*s: ", prec, "ERR");
+	seq_printf(p, "%10u\n", atomic_read(&irq_err_count));
 	return 0;
 }
 
 #ifdef CONFIG_HOTPLUG_CPU
 void migrate_irqs(void)
 {
-	irq_desc_t *desc;
 	int irq;
 	unsigned int self, new;
 	unsigned long flags;
 
 	self = smp_processor_id();
 	for (irq = 0; irq < NR_IRQS; irq++) {
-		desc = irq_desc + irq;
+		struct irq_data *data = irq_get_irq_data(irq);
 
-		if (desc->status == IRQ_PER_CPU)
+		if (irqd_is_per_cpu(data))
 			continue;
 
-		if (cpu_isset(self, irq_desc[irq].affinity) &&
+		if (cpu_isset(self, data->affinity) &&
 		    !cpus_intersects(irq_affinity[irq], cpu_online_map)) {
 			int cpu_id;
 			cpu_id = first_cpu(cpu_online_map);
-			cpu_set(cpu_id, irq_desc[irq].affinity);
+			cpu_set(cpu_id, data->affinity);
 		}
 		/* We need to operate irq_affinity_online atomically. */
 		arch_local_cli_save(flags);
@@ -451,7 +381,7 @@ void migrate_irqs(void)
 			GxICR(irq) = x & GxICR_LEVEL;
 			tmp = GxICR(irq);
 
-			new = any_online_cpu(irq_desc[irq].affinity);
+			new = any_online_cpu(data->affinity);
 			irq_affinity_online[irq] = new;
 
 			CROSS_GxICR(irq, new) =
diff --git a/arch/mn10300/kernel/kgdb.c b/arch/mn10300/kernel/kgdb.c
new file mode 100644
index 00000000000..f6c981db2a3
--- /dev/null
+++ b/arch/mn10300/kernel/kgdb.c
@@ -0,0 +1,502 @@
+/* kgdb support for MN10300
+ *
+ * Copyright (C) 2010 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#include <linux/slab.h>
+#include <linux/ptrace.h>
+#include <linux/kgdb.h>
+#include <linux/uaccess.h>
+#include <unit/leds.h>
+#include <unit/serial.h>
+#include <asm/debugger.h>
+#include <asm/serial-regs.h>
+#include "internal.h"
+
+/*
+ * Software single-stepping breakpoint save (used by __switch_to())
+ */
+static struct thread_info *kgdb_sstep_thread;
+u8 *kgdb_sstep_bp_addr[2];
+u8 kgdb_sstep_bp[2];
+
+/*
+ * Copy kernel exception frame registers to the GDB register file
+ */
+void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs)
+{
+	unsigned long ssp = (unsigned long) (regs + 1);
+
+	gdb_regs[GDB_FR_D0]	= regs->d0;
+	gdb_regs[GDB_FR_D1]	= regs->d1;
+	gdb_regs[GDB_FR_D2]	= regs->d2;
+	gdb_regs[GDB_FR_D3]	= regs->d3;
+	gdb_regs[GDB_FR_A0]	= regs->a0;
+	gdb_regs[GDB_FR_A1]	= regs->a1;
+	gdb_regs[GDB_FR_A2]	= regs->a2;
+	gdb_regs[GDB_FR_A3]	= regs->a3;
+	gdb_regs[GDB_FR_SP]	= (regs->epsw & EPSW_nSL) ? regs->sp : ssp;
+	gdb_regs[GDB_FR_PC]	= regs->pc;
+	gdb_regs[GDB_FR_MDR]	= regs->mdr;
+	gdb_regs[GDB_FR_EPSW]	= regs->epsw;
+	gdb_regs[GDB_FR_LIR]	= regs->lir;
+	gdb_regs[GDB_FR_LAR]	= regs->lar;
+	gdb_regs[GDB_FR_MDRQ]	= regs->mdrq;
+	gdb_regs[GDB_FR_E0]	= regs->e0;
+	gdb_regs[GDB_FR_E1]	= regs->e1;
+	gdb_regs[GDB_FR_E2]	= regs->e2;
+	gdb_regs[GDB_FR_E3]	= regs->e3;
+	gdb_regs[GDB_FR_E4]	= regs->e4;
+	gdb_regs[GDB_FR_E5]	= regs->e5;
+	gdb_regs[GDB_FR_E6]	= regs->e6;
+	gdb_regs[GDB_FR_E7]	= regs->e7;
+	gdb_regs[GDB_FR_SSP]	= ssp;
+	gdb_regs[GDB_FR_MSP]	= 0;
+	gdb_regs[GDB_FR_USP]	= regs->sp;
+	gdb_regs[GDB_FR_MCRH]	= regs->mcrh;
+	gdb_regs[GDB_FR_MCRL]	= regs->mcrl;
+	gdb_regs[GDB_FR_MCVF]	= regs->mcvf;
+	gdb_regs[GDB_FR_DUMMY0]	= 0;
+	gdb_regs[GDB_FR_DUMMY1]	= 0;
+	gdb_regs[GDB_FR_FS0]	= 0;
+}
+
+/*
+ * Extracts kernel SP/PC values understandable by gdb from the values
+ * saved by switch_to().
+ */
+void sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *p)
+{
+	gdb_regs[GDB_FR_SSP]	= p->thread.sp;
+	gdb_regs[GDB_FR_PC]	= p->thread.pc;
+	gdb_regs[GDB_FR_A3]	= p->thread.a3;
+	gdb_regs[GDB_FR_USP]	= p->thread.usp;
+	gdb_regs[GDB_FR_FPCR]	= p->thread.fpu_state.fpcr;
+}
+
+/*
+ * Fill kernel exception frame registers from the GDB register file
+ */
+void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *regs)
+{
+	regs->d0	= gdb_regs[GDB_FR_D0];
+	regs->d1	= gdb_regs[GDB_FR_D1];
+	regs->d2	= gdb_regs[GDB_FR_D2];
+	regs->d3	= gdb_regs[GDB_FR_D3];
+	regs->a0	= gdb_regs[GDB_FR_A0];
+	regs->a1	= gdb_regs[GDB_FR_A1];
+	regs->a2	= gdb_regs[GDB_FR_A2];
+	regs->a3	= gdb_regs[GDB_FR_A3];
+	regs->sp	= gdb_regs[GDB_FR_SP];
+	regs->pc	= gdb_regs[GDB_FR_PC];
+	regs->mdr	= gdb_regs[GDB_FR_MDR];
+	regs->epsw	= gdb_regs[GDB_FR_EPSW];
+	regs->lir	= gdb_regs[GDB_FR_LIR];
+	regs->lar	= gdb_regs[GDB_FR_LAR];
+	regs->mdrq	= gdb_regs[GDB_FR_MDRQ];
+	regs->e0	= gdb_regs[GDB_FR_E0];
+	regs->e1	= gdb_regs[GDB_FR_E1];
+	regs->e2	= gdb_regs[GDB_FR_E2];
+	regs->e3	= gdb_regs[GDB_FR_E3];
+	regs->e4	= gdb_regs[GDB_FR_E4];
+	regs->e5	= gdb_regs[GDB_FR_E5];
+	regs->e6	= gdb_regs[GDB_FR_E6];
+	regs->e7	= gdb_regs[GDB_FR_E7];
+	regs->sp	= gdb_regs[GDB_FR_SSP];
+	/* gdb_regs[GDB_FR_MSP]; */
+	// regs->usp	= gdb_regs[GDB_FR_USP];
+	regs->mcrh	= gdb_regs[GDB_FR_MCRH];
+	regs->mcrl	= gdb_regs[GDB_FR_MCRL];
+	regs->mcvf	= gdb_regs[GDB_FR_MCVF];
+	/* gdb_regs[GDB_FR_DUMMY0]; */
+	/* gdb_regs[GDB_FR_DUMMY1]; */
+
+	// regs->fpcr	= gdb_regs[GDB_FR_FPCR];
+	// regs->fs0	= gdb_regs[GDB_FR_FS0];
+}
+
+struct kgdb_arch arch_kgdb_ops = {
+	.gdb_bpt_instr	= { 0xff },
+	.flags		= KGDB_HW_BREAKPOINT,
+};
+
+static const unsigned char mn10300_kgdb_insn_sizes[256] =
+{
+	/* 1  2  3  4  5  6  7  8  9  a  b  c  d  e  f */
+	1, 3, 3, 3, 1, 3, 3, 3, 1, 3, 3, 3, 1, 3, 3, 3,	/* 0 */
+	1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, /* 1 */
+	2, 2, 2, 2, 3, 3, 3, 3, 2, 2, 2, 2, 3, 3, 3, 3, /* 2 */
+	3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 1, 1, 1, 1, /* 3 */
+	1, 1, 2, 2, 1, 1, 2, 2, 1, 1, 2, 2, 1, 1, 2, 2, /* 4 */
+	1, 1, 1, 1, 1, 1, 1, 1, 2, 2, 2, 2, 2, 2, 2, 2, /* 5 */
+	1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, /* 6 */
+	1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, /* 7 */
+	2, 1, 1, 1, 1, 2, 1, 1, 1, 1, 2, 1, 1, 1, 1, 2, /* 8 */
+	2, 1, 1, 1, 1, 2, 1, 1, 1, 1, 2, 1, 1, 1, 1, 2, /* 9 */
+	2, 1, 1, 1, 1, 2, 1, 1, 1, 1, 2, 1, 1, 1, 1, 2, /* a */
+	2, 1, 1, 1, 1, 2, 1, 1, 1, 1, 2, 1, 1, 1, 1, 2, /* b */
+	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 2, 2, /* c */
+	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* d */
+	1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, /* e */
+	0, 2, 2, 2, 2, 2, 2, 4, 0, 3, 0, 4, 0, 6, 7, 1  /* f */
+};
+
+/*
+ * Attempt to emulate single stepping by means of breakpoint instructions.
+ * Although there is a single-step trace flag in EPSW, its use is not
+ * sufficiently documented and is only intended for use with the JTAG debugger.
+ */
+static int kgdb_arch_do_singlestep(struct pt_regs *regs)
+{
+	unsigned long arg;
+	unsigned size;
+	u8 *pc = (u8 *)regs->pc, *sp = (u8 *)(regs + 1), cur;
+	u8 *x = NULL, *y = NULL;
+	int ret;
+
+	ret = probe_kernel_read(&cur, pc, 1);
+	if (ret < 0)
+		return ret;
+
+	size = mn10300_kgdb_insn_sizes[cur];
+	if (size > 0) {
+		x = pc + size;
+		goto set_x;
+	}
+
+	switch (cur) {
+		/* Bxx (d8,PC) */
+	case 0xc0 ... 0xca:
+		ret = probe_kernel_read(&arg, pc + 1, 1);
+		if (ret < 0)
+			return ret;
+		x = pc + 2;
+		if (arg >= 0 && arg <= 2)
+			goto set_x;
+		y = pc + (s8)arg;
+		goto set_x_and_y;
+
+		/* LXX (d8,PC) */
+	case 0xd0 ... 0xda:
+		x = pc + 1;
+		if (regs->pc == regs->lar)
+			goto set_x;
+		y = (u8 *)regs->lar;
+		goto set_x_and_y;
+
+		/* SETLB - loads the next four bytes into the LIR register
+		 * (which mustn't include a breakpoint instruction) */
+	case 0xdb:
+		x = pc + 5;
+		goto set_x;
+
+		/* JMP (d16,PC) or CALL (d16,PC) */
+	case 0xcc:
+	case 0xcd:
+		ret = probe_kernel_read(&arg, pc + 1, 2);
+		if (ret < 0)
+			return ret;
+		x = pc + (s16)arg;
+		goto set_x;
+
+		/* JMP (d32,PC) or CALL (d32,PC) */
+	case 0xdc:
+	case 0xdd:
+		ret = probe_kernel_read(&arg, pc + 1, 4);
+		if (ret < 0)
+			return ret;
+		x = pc + (s32)arg;
+		goto set_x;
+
+		/* RETF */
+	case 0xde:
+		x = (u8 *)regs->mdr;
+		goto set_x;
+
+		/* RET */
+	case 0xdf:
+		ret = probe_kernel_read(&arg, pc + 2, 1);
+		if (ret < 0)
+			return ret;
+		ret = probe_kernel_read(&x, sp + (s8)arg, 4);
+		if (ret < 0)
+			return ret;
+		goto set_x;
+
+	case 0xf0:
+		ret = probe_kernel_read(&cur, pc + 1, 1);
+		if (ret < 0)
+			return ret;
+
+		if (cur >= 0xf0 && cur <= 0xf7) {
+			/* JMP (An) / CALLS (An) */
+			switch (cur & 3) {
+			case 0: x = (u8 *)regs->a0; break;
+			case 1: x = (u8 *)regs->a1; break;
+			case 2: x = (u8 *)regs->a2; break;
+			case 3: x = (u8 *)regs->a3; break;
+			}
+			goto set_x;
+		} else if (cur == 0xfc) {
+			/* RETS */
+			ret = probe_kernel_read(&x, sp, 4);
+			if (ret < 0)
+				return ret;
+			goto set_x;
+		} else if (cur == 0xfd) {
+			/* RTI */
+			ret = probe_kernel_read(&x, sp + 4, 4);
+			if (ret < 0)
+				return ret;
+			goto set_x;
+		} else {
+			x = pc + 2;
+			goto set_x;
+		}
+		break;
+
+		/* potential 3-byte conditional branches */
+	case 0xf8:
+		ret = probe_kernel_read(&cur, pc + 1, 1);
+		if (ret < 0)
+			return ret;
+		x = pc + 3;
+
+		if (cur >= 0xe8 && cur <= 0xeb) {
+			ret = probe_kernel_read(&arg, pc + 2, 1);
+			if (ret < 0)
+				return ret;
+			if (arg >= 0 && arg <= 3)
+				goto set_x;
+			y = pc + (s8)arg;
+			goto set_x_and_y;
+		}
+		goto set_x;
+
+	case 0xfa:
+		ret = probe_kernel_read(&cur, pc + 1, 1);
+		if (ret < 0)
+			return ret;
+
+		if (cur == 0xff) {
+			/* CALLS (d16,PC) */
+			ret = probe_kernel_read(&arg, pc + 2, 2);
+			if (ret < 0)
+				return ret;
+			x = pc + (s16)arg;
+			goto set_x;
+		}
+
+		x = pc + 4;
+		goto set_x;
+
+	case 0xfc:
+		ret = probe_kernel_read(&cur, pc + 1, 1);
+		if (ret < 0)
+			return ret;
+
+		if (cur == 0xff) {
+			/* CALLS (d32,PC) */
+			ret = probe_kernel_read(&arg, pc + 2, 4);
+			if (ret < 0)
+				return ret;
+			x = pc + (s32)arg;
+			goto set_x;
+		}
+
+		x = pc + 6;
+		goto set_x;
+	}
+
+	return 0;
+
+set_x:
+	kgdb_sstep_bp_addr[0] = x;
+	kgdb_sstep_bp_addr[1] = NULL;
+	ret = probe_kernel_read(&kgdb_sstep_bp[0], x, 1);
+	if (ret < 0)
+		return ret;
+	ret = probe_kernel_write(x, &arch_kgdb_ops.gdb_bpt_instr, 1);
+	if (ret < 0)
+		return ret;
+	kgdb_sstep_thread = current_thread_info();
+	debugger_local_cache_flushinv_one(x);
+	return ret;
+
+set_x_and_y:
+	kgdb_sstep_bp_addr[0] = x;
+	kgdb_sstep_bp_addr[1] = y;
+	ret = probe_kernel_read(&kgdb_sstep_bp[0], x, 1);
+	if (ret < 0)
+		return ret;
+	ret = probe_kernel_read(&kgdb_sstep_bp[1], y, 1);
+	if (ret < 0)
+		return ret;
+	ret = probe_kernel_write(x, &arch_kgdb_ops.gdb_bpt_instr, 1);
+	if (ret < 0)
+		return ret;
+	ret = probe_kernel_write(y, &arch_kgdb_ops.gdb_bpt_instr, 1);
+	if (ret < 0) {
+		probe_kernel_write(kgdb_sstep_bp_addr[0],
+				   &kgdb_sstep_bp[0], 1);
+	} else {
+		kgdb_sstep_thread = current_thread_info();
+	}
+	debugger_local_cache_flushinv_one(x);
+	debugger_local_cache_flushinv_one(y);
+	return ret;
+}
+
+/*
+ * Remove emplaced single-step breakpoints, returning true if we hit one of
+ * them.
+ */
+static bool kgdb_arch_undo_singlestep(struct pt_regs *regs)
+{
+	bool hit = false;
+	u8 *x = kgdb_sstep_bp_addr[0], *y = kgdb_sstep_bp_addr[1];
+	u8 opcode;
+
+	if (kgdb_sstep_thread == current_thread_info()) {
+		if (x) {
+			if (x == (u8 *)regs->pc)
+				hit = true;
+			if (probe_kernel_read(&opcode, x,
+					      1) < 0 ||
+			    opcode != 0xff)
+				BUG();
+			probe_kernel_write(x, &kgdb_sstep_bp[0], 1);
+			debugger_local_cache_flushinv_one(x);
+		}
+		if (y) {
+			if (y == (u8 *)regs->pc)
+				hit = true;
+			if (probe_kernel_read(&opcode, y,
+					      1) < 0 ||
+			    opcode != 0xff)
+				BUG();
+			probe_kernel_write(y, &kgdb_sstep_bp[1], 1);
+			debugger_local_cache_flushinv_one(y);
+		}
+	}
+
+	kgdb_sstep_bp_addr[0] = NULL;
+	kgdb_sstep_bp_addr[1] = NULL;
+	kgdb_sstep_thread = NULL;
+	return hit;
+}
+
+/*
+ * Catch a single-step-pending thread being deleted and make sure the global
+ * single-step state is cleared.  At this point the breakpoints should have
+ * been removed by __switch_to().
+ */
+void free_thread_info(struct thread_info *ti)
+{
+	if (kgdb_sstep_thread == ti) {
+		kgdb_sstep_thread = NULL;
+
+		/* However, we may now be running in degraded mode, with most
+		 * of the CPUs disabled until such a time as KGDB is reentered,
+		 * so force immediate reentry */
+		kgdb_breakpoint();
+	}
+	kfree(ti);
+}
+
+/*
+ * Handle unknown packets and [CcsDk] packets
+ * - at this point breakpoints have been installed
+ */
+int kgdb_arch_handle_exception(int vector, int signo, int err_code,
+			       char *remcom_in_buffer, char *remcom_out_buffer,
+			       struct pt_regs *regs)
+{
+	long addr;
+	char *ptr;
+
+	switch (remcom_in_buffer[0]) {
+	case 'c':
+	case 's':
+		/* try to read optional parameter, pc unchanged if no parm */
+		ptr = &remcom_in_buffer[1];
+		if (kgdb_hex2long(&ptr, &addr))
+			regs->pc = addr;
+	case 'D':
+	case 'k':
+		atomic_set(&kgdb_cpu_doing_single_step, -1);
+
+		if (remcom_in_buffer[0] == 's') {
+			kgdb_arch_do_singlestep(regs);
+			kgdb_single_step = 1;
+			atomic_set(&kgdb_cpu_doing_single_step,
+				   raw_smp_processor_id());
+		}
+		return 0;
+	}
+	return -1; /* this means that we do not want to exit from the handler */
+}
+
+/*
+ * Handle event interception
+ * - returns 0 if the exception should be skipped, -ERROR otherwise.
+ */
+int debugger_intercept(enum exception_code excep, int signo, int si_code,
+		       struct pt_regs *regs)
+{
+	int ret;
+
+	if (kgdb_arch_undo_singlestep(regs)) {
+		excep = EXCEP_TRAP;
+		signo = SIGTRAP;
+		si_code = TRAP_TRACE;
+	}
+
+	ret = kgdb_handle_exception(excep, signo, si_code, regs);
+
+	debugger_local_cache_flushinv();
+
+	return ret;
+}
+
+/*
+ * Determine if we've hit a debugger special breakpoint
+ */
+int at_debugger_breakpoint(struct pt_regs *regs)
+{
+	return regs->pc == (unsigned long)&__arch_kgdb_breakpoint;
+}
+
+/*
+ * Initialise kgdb
+ */
+int kgdb_arch_init(void)
+{
+	return 0;
+}
+
+/*
+ * Do something, perhaps, but don't know what.
+ */
+void kgdb_arch_exit(void)
+{
+}
+
+#ifdef CONFIG_SMP
+void debugger_nmi_interrupt(struct pt_regs *regs, enum exception_code code)
+{
+	kgdb_nmicallback(arch_smp_processor_id(), regs);
+	debugger_local_cache_flushinv();
+}
+
+void kgdb_roundup_cpus(unsigned long flags)
+{
+	smp_jump_to_debugger();
+}
+#endif
diff --git a/arch/mn10300/kernel/mn10300-serial.c b/arch/mn10300/kernel/mn10300-serial.c
index 996384dba45..94901c56baf 100644
--- a/arch/mn10300/kernel/mn10300-serial.c
+++ b/arch/mn10300/kernel/mn10300-serial.c
@@ -119,6 +119,10 @@ static int mn10300_serial_request_port(struct uart_port *);
 static void mn10300_serial_config_port(struct uart_port *, int);
 static int mn10300_serial_verify_port(struct uart_port *,
 					struct serial_struct *);
+#ifdef CONFIG_CONSOLE_POLL
+static void mn10300_serial_poll_put_char(struct uart_port *, unsigned char);
+static int mn10300_serial_poll_get_char(struct uart_port *);
+#endif
 
 static const struct uart_ops mn10300_serial_ops = {
 	.tx_empty	= mn10300_serial_tx_empty,
@@ -138,6 +142,10 @@ static const struct uart_ops mn10300_serial_ops = {
 	.request_port	= mn10300_serial_request_port,
 	.config_port	= mn10300_serial_config_port,
 	.verify_port	= mn10300_serial_verify_port,
+#ifdef CONFIG_CONSOLE_POLL
+	.poll_put_char	= mn10300_serial_poll_put_char,
+	.poll_get_char	= mn10300_serial_poll_get_char,
+#endif
 };
 
 static irqreturn_t mn10300_serial_interrupt(int irq, void *dev_id);
@@ -384,17 +392,21 @@ static void mn10300_serial_mask_ack(unsigned int irq)
 	arch_local_irq_restore(flags);
 }
 
-static void mn10300_serial_nop(unsigned int irq)
+static void mn10300_serial_chip_mask_ack(struct irq_data *d)
+{
+	mn10300_serial_mask_ack(d->irq);
+}
+
+static void mn10300_serial_nop(struct irq_data *d)
 {
 }
 
 static struct irq_chip mn10300_serial_pic = {
 	.name		= "mnserial",
-	.ack		= mn10300_serial_mask_ack,
-	.mask		= mn10300_serial_mask_ack,
-	.mask_ack	= mn10300_serial_mask_ack,
-	.unmask		= mn10300_serial_nop,
-	.end		= mn10300_serial_nop,
+	.irq_ack	= mn10300_serial_chip_mask_ack,
+	.irq_mask	= mn10300_serial_chip_mask_ack,
+	.irq_mask_ack	= mn10300_serial_chip_mask_ack,
+	.irq_unmask	= mn10300_serial_nop,
 };
 
 
@@ -921,7 +933,7 @@ static int mn10300_serial_startup(struct uart_port *_port)
 		NUM2GxICR_LEVEL(CONFIG_MN10300_SERIAL_IRQ_LEVEL));
 	set_intr_level(port->tx_irq,
 		NUM2GxICR_LEVEL(CONFIG_MN10300_SERIAL_IRQ_LEVEL));
-	set_irq_chip(port->tm_irq, &mn10300_serial_pic);
+	irq_set_chip(port->tm_irq, &mn10300_serial_pic);
 
 	if (request_irq(port->rx_irq, mn10300_serial_interrupt,
 			IRQF_DISABLED, port->rx_name, port) < 0)
@@ -1630,3 +1642,70 @@ static int __init mn10300_serial_console_init(void)
 
 console_initcall(mn10300_serial_console_init);
 #endif
+
+#ifdef CONFIG_CONSOLE_POLL
+/*
+ * Polled character reception for the kernel debugger
+ */
+static int mn10300_serial_poll_get_char(struct uart_port *_port)
+{
+	struct mn10300_serial_port *port =
+		container_of(_port, struct mn10300_serial_port, uart);
+	unsigned ix;
+	u8 st, ch;
+
+	_enter("%s", port->name);
+
+	do {
+		/* pull chars out of the hat */
+		ix = port->rx_outp;
+		if (ix == port->rx_inp)
+			return NO_POLL_CHAR;
+
+		ch = port->rx_buffer[ix++];
+		st = port->rx_buffer[ix++];
+		smp_rmb();
+		port->rx_outp = ix & (MNSC_BUFFER_SIZE - 1);
+
+	} while (st & (SC01STR_FEF | SC01STR_PEF | SC01STR_OEF));
+
+	return ch;
+}
+
+
+/*
+ * Polled character transmission for the kernel debugger
+ */
+static void mn10300_serial_poll_put_char(struct uart_port *_port,
+					 unsigned char ch)
+{
+	struct mn10300_serial_port *port =
+		container_of(_port, struct mn10300_serial_port, uart);
+	u8 intr, tmp;
+
+	/* wait for the transmitter to finish anything it might be doing (and
+	 * this includes the virtual DMA handler, so it might take a while) */
+	while (*port->_status & (SC01STR_TBF | SC01STR_TXF))
+		continue;
+
+	/* disable the Tx ready interrupt */
+	intr = *port->_intr;
+	*port->_intr = intr & ~SC01ICR_TI;
+	tmp = *port->_intr;
+
+	if (ch == 0x0a) {
+		*(u8 *) port->_txb = 0x0d;
+		while (*port->_status & SC01STR_TBF)
+			continue;
+	}
+
+	*(u8 *) port->_txb = ch;
+	while (*port->_status & SC01STR_TBF)
+		continue;
+
+	/* restore the Tx interrupt flag */
+	*port->_intr = intr;
+	tmp = *port->_intr;
+}
+
+#endif /* CONFIG_CONSOLE_POLL */
diff --git a/arch/mn10300/kernel/process.c b/arch/mn10300/kernel/process.c
index e1b14a6ed54..28eec310253 100644
--- a/arch/mn10300/kernel/process.c
+++ b/arch/mn10300/kernel/process.c
@@ -135,7 +135,7 @@ void release_segments(struct mm_struct *mm)
 
 void machine_restart(char *cmd)
 {
-#ifdef CONFIG_GDBSTUB
+#ifdef CONFIG_KERNEL_DEBUGGER
 	gdbstub_exit(0);
 #endif
 
@@ -148,14 +148,14 @@ void machine_restart(char *cmd)
 
 void machine_halt(void)
 {
-#ifdef CONFIG_GDBSTUB
+#ifdef CONFIG_KERNEL_DEBUGGER
 	gdbstub_exit(0);
 #endif
 }
 
 void machine_power_off(void)
 {
-#ifdef CONFIG_GDBSTUB
+#ifdef CONFIG_KERNEL_DEBUGGER
 	gdbstub_exit(0);
 #endif
 }
diff --git a/arch/mn10300/kernel/smp.c b/arch/mn10300/kernel/smp.c
index 0dcd1c686ba..226c826a219 100644
--- a/arch/mn10300/kernel/smp.c
+++ b/arch/mn10300/kernel/smp.c
@@ -113,15 +113,17 @@ static void init_ipi(void);
  */
 static void mn10300_ipi_disable(unsigned int irq);
 static void mn10300_ipi_enable(unsigned int irq);
-static void mn10300_ipi_ack(unsigned int irq);
-static void mn10300_ipi_nop(unsigned int irq);
+static void mn10300_ipi_chip_disable(struct irq_data *d);
+static void mn10300_ipi_chip_enable(struct irq_data *d);
+static void mn10300_ipi_ack(struct irq_data *d);
+static void mn10300_ipi_nop(struct irq_data *d);
 
 static struct irq_chip mn10300_ipi_type = {
 	.name		= "cpu_ipi",
-	.disable	= mn10300_ipi_disable,
-	.enable		= mn10300_ipi_enable,
-	.ack		= mn10300_ipi_ack,
-	.eoi		= mn10300_ipi_nop
+	.irq_disable	= mn10300_ipi_chip_disable,
+	.irq_enable	= mn10300_ipi_chip_enable,
+	.irq_ack	= mn10300_ipi_ack,
+	.irq_eoi	= mn10300_ipi_nop
 };
 
 static irqreturn_t smp_reschedule_interrupt(int irq, void *dev_id);
@@ -154,15 +156,15 @@ static void init_ipi(void)
 	u16 tmp16;
 
 	/* set up the reschedule IPI */
-	set_irq_chip_and_handler(RESCHEDULE_IPI,
-				 &mn10300_ipi_type, handle_percpu_irq);
+	irq_set_chip_and_handler(RESCHEDULE_IPI, &mn10300_ipi_type,
+				 handle_percpu_irq);
 	setup_irq(RESCHEDULE_IPI, &reschedule_ipi);
 	set_intr_level(RESCHEDULE_IPI, RESCHEDULE_GxICR_LV);
 	mn10300_ipi_enable(RESCHEDULE_IPI);
 
 	/* set up the call function IPI */
-	set_irq_chip_and_handler(CALL_FUNC_SINGLE_IPI,
-				 &mn10300_ipi_type, handle_percpu_irq);
+	irq_set_chip_and_handler(CALL_FUNC_SINGLE_IPI, &mn10300_ipi_type,
+				 handle_percpu_irq);
 	setup_irq(CALL_FUNC_SINGLE_IPI, &call_function_ipi);
 	set_intr_level(CALL_FUNC_SINGLE_IPI, CALL_FUNCTION_GxICR_LV);
 	mn10300_ipi_enable(CALL_FUNC_SINGLE_IPI);
@@ -170,8 +172,8 @@ static void init_ipi(void)
 	/* set up the local timer IPI */
 #if !defined(CONFIG_GENERIC_CLOCKEVENTS) || \
     defined(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST)
-	set_irq_chip_and_handler(LOCAL_TIMER_IPI,
-				 &mn10300_ipi_type, handle_percpu_irq);
+	irq_set_chip_and_handler(LOCAL_TIMER_IPI, &mn10300_ipi_type,
+				 handle_percpu_irq);
 	setup_irq(LOCAL_TIMER_IPI, &local_timer_ipi);
 	set_intr_level(LOCAL_TIMER_IPI, LOCAL_TIMER_GxICR_LV);
 	mn10300_ipi_enable(LOCAL_TIMER_IPI);
@@ -236,6 +238,11 @@ static void mn10300_ipi_enable(unsigned int irq)
 	arch_local_irq_restore(flags);
 }
 
+static void mn10300_ipi_chip_enable(struct irq_data *d)
+{
+	mn10300_ipi_enable(d->irq);
+}
+
 /**
  * mn10300_ipi_disable - Disable an IPI
  * @irq: The IPI to be disabled.
@@ -254,6 +261,12 @@ static void mn10300_ipi_disable(unsigned int irq)
 	arch_local_irq_restore(flags);
 }
 
+static void mn10300_ipi_chip_disable(struct irq_data *d)
+{
+	mn10300_ipi_disable(d->irq);
+}
+
+
 /**
  * mn10300_ipi_ack - Acknowledge an IPI interrupt in the PIC
  * @irq: The IPI to be acknowledged.
@@ -261,8 +274,9 @@ static void mn10300_ipi_disable(unsigned int irq)
  * Clear the interrupt detection flag for the IPI on the appropriate interrupt
  * channel in the PIC.
  */
-static void mn10300_ipi_ack(unsigned int irq)
+static void mn10300_ipi_ack(struct irq_data *d)
 {
+	unsigned int irq = d->irq;
 	unsigned long flags;
 	u16 tmp;
 
@@ -276,7 +290,7 @@ static void mn10300_ipi_ack(unsigned int irq)
  * mn10300_ipi_nop - Dummy IPI action
  * @irq: The IPI to be acted upon.
  */
-static void mn10300_ipi_nop(unsigned int irq)
+static void mn10300_ipi_nop(struct irq_data *d)
 {
 }
 
@@ -426,6 +440,22 @@ int smp_nmi_call_function(smp_call_func_t func, void *info, int wait)
 }
 
 /**
+ * smp_jump_to_debugger - Make other CPUs enter the debugger by sending an IPI
+ *
+ * Send a non-maskable request to all other CPUs in the system, instructing
+ * them to jump into the debugger.  The caller is responsible for checking that
+ * the other CPUs responded to the instruction.
+ *
+ * The caller should make sure that this CPU's debugger IPI is disabled.
+ */
+void smp_jump_to_debugger(void)
+{
+	if (num_online_cpus() > 1)
+		/* Send a message to all other CPUs */
+		send_IPI_allbutself(DEBUGGER_NMI_IPI);
+}
+
+/**
  * stop_this_cpu - Callback to stop a CPU.
  * @unused: Callback context (ignored).
  */
@@ -589,7 +619,7 @@ static void __init smp_cpu_init(void)
 /**
  * smp_prepare_cpu_init - Initialise CPU in startup_secondary
  *
- * Set interrupt level 0-6 setting and init ICR of gdbstub.
+ * Set interrupt level 0-6 setting and init ICR of the kernel debugger.
  */
 void smp_prepare_cpu_init(void)
 {
@@ -608,15 +638,15 @@ void smp_prepare_cpu_init(void)
 	for (loop = 0; loop < GxICR_NUM_IRQS; loop++)
 		GxICR(loop) = GxICR_LEVEL_6 | GxICR_DETECT;
 
-#ifdef CONFIG_GDBSTUB
-	/* initialise GDB-stub */
+#ifdef CONFIG_KERNEL_DEBUGGER
+	/* initialise the kernel debugger interrupt */
 	do {
 		unsigned long flags;
 		u16 tmp16;
 
 		flags = arch_local_cli_save();
-		GxICR(GDB_NMI_IPI) = GxICR_NMI | GxICR_ENABLE | GxICR_DETECT;
-		tmp16 = GxICR(GDB_NMI_IPI);
+		GxICR(DEBUGGER_NMI_IPI) = GxICR_NMI | GxICR_ENABLE | GxICR_DETECT;
+		tmp16 = GxICR(DEBUGGER_NMI_IPI);
 		arch_local_irq_restore(flags);
 	} while (0);
 #endif
diff --git a/arch/mn10300/kernel/switch_to.S b/arch/mn10300/kernel/switch_to.S
index 9074d0fb878..de3e74fc9ea 100644
--- a/arch/mn10300/kernel/switch_to.S
+++ b/arch/mn10300/kernel/switch_to.S
@@ -39,11 +39,17 @@ ENTRY(__switch_to)
 
 	# save prev context
 	mov	__switch_back,d0
-	mov	d0,(THREAD_PC,a0)
 	mov	sp,a2
 	mov	a2,(THREAD_SP,a0)
 	mov	a3,(THREAD_A3,a0)
 
+#ifdef CONFIG_KGDB
+	btst	0xff,(kgdb_single_step)
+	bne	__switch_to__lift_sstep_bp
+__switch_to__continue:
+#endif
+	mov	d0,(THREAD_PC,a0)
+
 	mov	(THREAD_A3,a1),a3
 	mov	(THREAD_SP,a1),a2
 
@@ -68,3 +74,106 @@ ENTRY(__switch_to)
 __switch_back:
 	and	~EPSW_NMID,epsw
 	ret	[d2,d3,a2,a3,exreg1],32
+
+#ifdef CONFIG_KGDB
+###############################################################################
+#
+# Lift the single-step breakpoints when the task being traced is switched out
+# A0 = prev
+# A1 = next
+#
+###############################################################################
+__switch_to__lift_sstep_bp:
+	add	-12,sp
+	mov	a0,e4
+	mov	a1,e5
+
+	# Clear the single-step flag to prevent us coming this way until we get
+	# switched back in
+	bclr	0xff,(kgdb_single_step)
+
+	# Remove first breakpoint
+	mov	(kgdb_sstep_bp_addr),a2
+	cmp	0,a2
+	beq	1f
+	movbu	(kgdb_sstep_bp),d0
+	movbu	d0,(a2)
+#if defined(CONFIG_MN10300_CACHE_FLUSH_ICACHE) || defined(CONFIG_MN10300_CACHE_INV_ICACHE)
+	mov	a2,d0
+	mov	a2,d1
+	add	1,d1
+	calls	flush_icache_range
+#endif
+1:
+
+	# Remove second breakpoint
+	mov	(kgdb_sstep_bp_addr+4),a2
+	cmp	0,a2
+	beq	2f
+	movbu	(kgdb_sstep_bp+1),d0
+	movbu	d0,(a2)
+#if defined(CONFIG_MN10300_CACHE_FLUSH_ICACHE) || defined(CONFIG_MN10300_CACHE_INV_ICACHE)
+	mov	a2,d0
+	mov	a2,d1
+	add	1,d1
+	calls	flush_icache_range
+#endif
+2:
+
+	# Change the resumption address and return
+	mov	__switch_back__reinstall_sstep_bp,d0
+	mov	e4,a0
+	mov	e5,a1
+	add	12,sp
+	bra	__switch_to__continue
+
+###############################################################################
+#
+# Reinstall the single-step breakpoints when the task being traced is switched
+# back in (A1 points to the new thread_struct).
+#
+###############################################################################
+__switch_back__reinstall_sstep_bp:
+	add	-12,sp
+	mov	a0,e4			# save the return value
+	mov	0xff,d3
+
+	# Reinstall first breakpoint
+	mov	(kgdb_sstep_bp_addr),a2
+	cmp	0,a2
+	beq	1f
+	movbu	(a2),d0
+	movbu	d0,(kgdb_sstep_bp)
+	movbu	d3,(a2)
+#if defined(CONFIG_MN10300_CACHE_FLUSH_ICACHE) || defined(CONFIG_MN10300_CACHE_INV_ICACHE)
+	mov	a2,d0
+	mov	a2,d1
+	add	1,d1
+	calls	flush_icache_range
+#endif
+1:
+
+	# Reinstall second breakpoint
+	mov	(kgdb_sstep_bp_addr+4),a2
+	cmp	0,a2
+	beq	2f
+	movbu	(a2),d0
+	movbu	d0,(kgdb_sstep_bp+1)
+	movbu	d3,(a2)
+#if defined(CONFIG_MN10300_CACHE_FLUSH_ICACHE) || defined(CONFIG_MN10300_CACHE_INV_ICACHE)
+	mov	a2,d0
+	mov	a2,d1
+	add	1,d1
+	calls	flush_icache_range
+#endif
+2:
+
+	mov	d3,(kgdb_single_step)
+
+	# Restore the return value (the previous thread_struct pointer)
+	mov	e4,a0
+	mov	a0,d0
+	add	12,sp
+	bra	__switch_back
+
+#endif /* CONFIG_KGDB */
diff --git a/arch/mn10300/kernel/time.c b/arch/mn10300/kernel/time.c
index 5b955000626..67c6416a58f 100644
--- a/arch/mn10300/kernel/time.c
+++ b/arch/mn10300/kernel/time.c
@@ -93,79 +93,6 @@ irqreturn_t local_timer_interrupt(void)
 	return IRQ_HANDLED;
 }
 
-#ifndef CONFIG_GENERIC_TIME
-/*
- * advance the kernel's time keeping clocks (xtime and jiffies)
- * - we use Timer 0 & 1 cascaded as a clock to nudge us the next time
- *   there's a need to update
- */
-static irqreturn_t timer_interrupt(int irq, void *dev_id)
-{
-	unsigned tsc, elapse;
-	irqreturn_t ret;
-
-	while (tsc = get_cycles(),
-	       elapse = tsc - mn10300_last_tsc, /* time elapsed since last
-						 * tick */
-	       elapse > MN10300_TSC_PER_HZ
-	       ) {
-		mn10300_last_tsc += MN10300_TSC_PER_HZ;
-
-		/* advance the kernel's time tracking system */
-		xtime_update(1);
-	}
-
-	ret = local_timer_interrupt();
-#ifdef CONFIG_SMP
-	send_IPI_allbutself(LOCAL_TIMER_IPI);
-#endif
-	return ret;
-}
-
-static struct irqaction timer_irq = {
-	.handler	= timer_interrupt,
-	.flags		= IRQF_DISABLED | IRQF_SHARED | IRQF_TIMER,
-	.name		= "timer",
-};
-#endif /* CONFIG_GENERIC_TIME */
-
-#ifdef CONFIG_CSRC_MN10300
-void __init clocksource_set_clock(struct clocksource *cs, unsigned int clock)
-{
-	u64 temp;
-	u32 shift;
-
-	/* Find a shift value */
-	for (shift = 32; shift > 0; shift--) {
-		temp = (u64) NSEC_PER_SEC << shift;
-		do_div(temp, clock);
-		if ((temp >> 32) == 0)
-			break;
-	}
-	cs->shift = shift;
-	cs->mult = (u32) temp;
-}
-#endif
-
-#if CONFIG_CEVT_MN10300
-void __cpuinit clockevent_set_clock(struct clock_event_device *cd,
-				    unsigned int clock)
-{
-	u64 temp;
-	u32 shift;
-
-	/* Find a shift value */
-	for (shift = 32; shift > 0; shift--) {
-		temp = (u64) clock << shift;
-		do_div(temp, NSEC_PER_SEC);
-		if ((temp >> 32) == 0)
-			break;
-	}
-	cd->shift = shift;
-	cd->mult = (u32) temp;
-}
-#endif
-
 /*
  * initialise the various timers used by the main part of the kernel
  */
@@ -177,11 +104,7 @@ void __init time_init(void)
 	 */
 	TMPSCNT |= TMPSCNT_ENABLE;
 
-#ifdef CONFIG_GENERIC_TIME
 	init_clocksource();
-#else
-	startup_timestamp_counter();
-#endif
 
 	printk(KERN_INFO
 	       "timestamp counter I/O clock running at %lu.%02lu"
@@ -190,12 +113,7 @@ void __init time_init(void)
 
 	mn10300_last_tsc = read_timestamp_counter();
 
-#ifdef CONFIG_GENERIC_CLOCKEVENTS
 	init_clockevents();
-#else
-	reload_jiffies_counter(MN10300_JC_PER_HZ - 1);
-	setup_jiffies_interrupt(TMJCIRQ, &timer_irq, CONFIG_TIMER_IRQ_LEVEL);
-#endif
 
 #ifdef CONFIG_MN10300_WD_TIMER
 	/* start the watchdog timer */
diff --git a/arch/mn10300/kernel/traps.c b/arch/mn10300/kernel/traps.c
index b90c3f160c7..f03cb278828 100644
--- a/arch/mn10300/kernel/traps.c
+++ b/arch/mn10300/kernel/traps.c
@@ -38,8 +38,9 @@
 #include <asm/busctl-regs.h>
 #include <unit/leds.h>
 #include <asm/fpu.h>
-#include <asm/gdb-stub.h>
 #include <asm/sections.h>
+#include <asm/debugger.h>
+#include "internal.h"
 
 #if (CONFIG_INTERRUPT_VECTOR_BASE & 0xffffff)
 #error "INTERRUPT_VECTOR_BASE not aligned to 16MiB boundary!"
@@ -49,63 +50,169 @@ int kstack_depth_to_print = 24;
 
 spinlock_t die_lock = __SPIN_LOCK_UNLOCKED(die_lock);
 
-ATOMIC_NOTIFIER_HEAD(mn10300_die_chain);
+struct exception_to_signal_map {
+	u8	signo;
+	u32	si_code;
+};
+
+static const struct exception_to_signal_map exception_to_signal_map[256] = {
+	/* MMU exceptions */
+	[EXCEP_ITLBMISS >> 3]	= { 0, 0 },
+	[EXCEP_DTLBMISS >> 3]	= { 0, 0 },
+	[EXCEP_IAERROR >> 3]	= { 0, 0 },
+	[EXCEP_DAERROR >> 3]	= { 0, 0 },
+
+	/* system exceptions */
+	[EXCEP_TRAP >> 3]	= { SIGTRAP,	TRAP_BRKPT },
+	[EXCEP_ISTEP >> 3]	= { SIGTRAP,	TRAP_TRACE },	/* Monitor */
+	[EXCEP_IBREAK >> 3]	= { SIGTRAP,	TRAP_HWBKPT },	/* Monitor */
+	[EXCEP_OBREAK >> 3]	= { SIGTRAP,	TRAP_HWBKPT },	/* Monitor */
+	[EXCEP_PRIVINS >> 3]	= { SIGILL,	ILL_PRVOPC },
+	[EXCEP_UNIMPINS >> 3]	= { SIGILL,	ILL_ILLOPC },
+	[EXCEP_UNIMPEXINS >> 3]	= { SIGILL,	ILL_ILLOPC },
+	[EXCEP_MEMERR >> 3]	= { SIGSEGV,	SEGV_ACCERR },
+	[EXCEP_MISALIGN >> 3]	= { SIGBUS,	BUS_ADRALN },
+	[EXCEP_BUSERROR >> 3]	= { SIGBUS,	BUS_ADRERR },
+	[EXCEP_ILLINSACC >> 3]	= { SIGSEGV,	SEGV_ACCERR },
+	[EXCEP_ILLDATACC >> 3]	= { SIGSEGV,	SEGV_ACCERR },
+	[EXCEP_IOINSACC >> 3]	= { SIGSEGV,	SEGV_ACCERR },
+	[EXCEP_PRIVINSACC >> 3]	= { SIGSEGV,	SEGV_ACCERR }, /* userspace */
+	[EXCEP_PRIVDATACC >> 3]	= { SIGSEGV,	SEGV_ACCERR }, /* userspace */
+	[EXCEP_DATINSACC >> 3]	= { SIGSEGV,	SEGV_ACCERR },
+	[EXCEP_DOUBLE_FAULT >> 3] = { SIGILL,	ILL_BADSTK },
+
+	/* FPU exceptions */
+	[EXCEP_FPU_DISABLED >> 3] = { SIGILL,	ILL_COPROC },
+	[EXCEP_FPU_UNIMPINS >> 3] = { SIGILL,	ILL_COPROC },
+	[EXCEP_FPU_OPERATION >> 3] = { SIGFPE,	FPE_INTDIV },
+
+	/* interrupts */
+	[EXCEP_WDT >> 3]	= { SIGALRM,	0 },
+	[EXCEP_NMI >> 3]	= { SIGQUIT,	0 },
+	[EXCEP_IRQ_LEVEL0 >> 3]	= { SIGINT,	0 },
+	[EXCEP_IRQ_LEVEL1 >> 3]	= { 0, 0 },
+	[EXCEP_IRQ_LEVEL2 >> 3]	= { 0, 0 },
+	[EXCEP_IRQ_LEVEL3 >> 3]	= { 0, 0 },
+	[EXCEP_IRQ_LEVEL4 >> 3]	= { 0, 0 },
+	[EXCEP_IRQ_LEVEL5 >> 3]	= { 0, 0 },
+	[EXCEP_IRQ_LEVEL6 >> 3]	= { 0, 0 },
+
+	/* system calls */
+	[EXCEP_SYSCALL0 >> 3]	= { 0, 0 },
+	[EXCEP_SYSCALL1 >> 3]	= { SIGILL,	ILL_ILLTRP },
+	[EXCEP_SYSCALL2 >> 3]	= { SIGILL,	ILL_ILLTRP },
+	[EXCEP_SYSCALL3 >> 3]	= { SIGILL,	ILL_ILLTRP },
+	[EXCEP_SYSCALL4 >> 3]	= { SIGILL,	ILL_ILLTRP },
+	[EXCEP_SYSCALL5 >> 3]	= { SIGILL,	ILL_ILLTRP },
+	[EXCEP_SYSCALL6 >> 3]	= { SIGILL,	ILL_ILLTRP },
+	[EXCEP_SYSCALL7 >> 3]	= { SIGILL,	ILL_ILLTRP },
+	[EXCEP_SYSCALL8 >> 3]	= { SIGILL,	ILL_ILLTRP },
+	[EXCEP_SYSCALL9 >> 3]	= { SIGILL,	ILL_ILLTRP },
+	[EXCEP_SYSCALL10 >> 3]	= { SIGILL,	ILL_ILLTRP },
+	[EXCEP_SYSCALL11 >> 3]	= { SIGILL,	ILL_ILLTRP },
+	[EXCEP_SYSCALL12 >> 3]	= { SIGILL,	ILL_ILLTRP },
+	[EXCEP_SYSCALL13 >> 3]	= { SIGILL,	ILL_ILLTRP },
+	[EXCEP_SYSCALL14 >> 3]	= { SIGILL,	ILL_ILLTRP },
+	[EXCEP_SYSCALL15 >> 3]	= { SIGABRT,	0 },
+};
 
 /*
- * These constants are for searching for possible module text
- * segments. MODULE_RANGE is a guess of how much space is likely
- * to be vmalloced.
+ * Handle kernel exceptions.
+ *
+ * See if there's a fixup handler we can force a jump to when an exception
+ * happens due to something kernel code did
  */
-#define MODULE_RANGE (8 * 1024 * 1024)
-
-#define DO_ERROR(signr, prologue, str, name)			\
-asmlinkage void name(struct pt_regs *regs, u32 intcode)		\
-{								\
-	prologue;						\
-	if (die_if_no_fixup(str, regs, intcode))		\
-		return;						\
-	force_sig(signr, current);				\
-}
+int die_if_no_fixup(const char *str, struct pt_regs *regs,
+		    enum exception_code code)
+{
+	u8 opcode;
+	int signo, si_code;
+
+	if (user_mode(regs))
+		return 0;
+
+	peripheral_leds_display_exception(code);
+
+	signo = exception_to_signal_map[code >> 3].signo;
+	si_code = exception_to_signal_map[code >> 3].si_code;
+
+	switch (code) {
+		/* see if we can fixup the kernel accessing memory */
+	case EXCEP_ITLBMISS:
+	case EXCEP_DTLBMISS:
+	case EXCEP_IAERROR:
+	case EXCEP_DAERROR:
+	case EXCEP_MEMERR:
+	case EXCEP_MISALIGN:
+	case EXCEP_BUSERROR:
+	case EXCEP_ILLDATACC:
+	case EXCEP_IOINSACC:
+	case EXCEP_PRIVINSACC:
+	case EXCEP_PRIVDATACC:
+	case EXCEP_DATINSACC:
+		if (fixup_exception(regs))
+			return 1;
+		break;
 
-#define DO_EINFO(signr, prologue, str, name, sicode)			\
-asmlinkage void name(struct pt_regs *regs, u32 intcode)			\
-{									\
-	siginfo_t info;							\
-	prologue;							\
-	if (die_if_no_fixup(str, regs, intcode))			\
-		return;							\
-	info.si_signo = signr;						\
-	if (signr == SIGILL && sicode == ILL_ILLOPC) {			\
-		uint8_t opcode;						\
-		if (get_user(opcode, (uint8_t __user *)regs->pc) == 0)	\
-			if (opcode == 0xff)				\
-				info.si_signo = SIGTRAP;		\
-	}								\
-	info.si_errno = 0;						\
-	info.si_code = sicode;						\
-	info.si_addr = (void *) regs->pc;				\
-	force_sig_info(info.si_signo, &info, current);			\
+	case EXCEP_TRAP:
+	case EXCEP_UNIMPINS:
+		if (get_user(opcode, (uint8_t __user *)regs->pc) != 0)
+			break;
+		if (opcode == 0xff) {
+			if (notify_die(DIE_BREAKPOINT, str, regs, code, 0, 0))
+				return 1;
+			if (at_debugger_breakpoint(regs))
+				regs->pc++;
+			signo = SIGTRAP;
+			si_code = TRAP_BRKPT;
+		}
+		break;
+
+	case EXCEP_SYSCALL1 ... EXCEP_SYSCALL14:
+		/* syscall return addr is _after_ the instruction */
+		regs->pc -= 2;
+		break;
+
+	case EXCEP_SYSCALL15:
+		if (report_bug(regs->pc, regs) == BUG_TRAP_TYPE_WARN)
+			return 1;
+
+		/* syscall return addr is _after_ the instruction */
+		regs->pc -= 2;
+		break;
+
+	default:
+		break;
+	}
+
+	if (debugger_intercept(code, signo, si_code, regs) == 0)
+		return 1;
+
+	if (notify_die(DIE_GPF, str, regs, code, 0, 0))
+		return 1;
+
+	/* make the process die as the last resort */
+	die(str, regs, code);
 }
 
-DO_ERROR(SIGTRAP, {}, "trap",			trap);
-DO_ERROR(SIGSEGV, {}, "ibreak",			ibreak);
-DO_ERROR(SIGSEGV, {}, "obreak",			obreak);
-DO_EINFO(SIGSEGV, {}, "access error",		access_error,	SEGV_ACCERR);
-DO_EINFO(SIGSEGV, {}, "insn access error",	insn_acc_error,	SEGV_ACCERR);
-DO_EINFO(SIGSEGV, {}, "data access error",	data_acc_error,	SEGV_ACCERR);
-DO_EINFO(SIGILL,  {}, "privileged opcode",	priv_op,	ILL_PRVOPC);
-DO_EINFO(SIGILL,  {}, "invalid opcode",		invalid_op,	ILL_ILLOPC);
-DO_EINFO(SIGILL,  {}, "invalid ex opcode",	invalid_exop,	ILL_ILLOPC);
-DO_EINFO(SIGBUS,  {}, "invalid address",	mem_error,	BUS_ADRERR);
-DO_EINFO(SIGBUS,  {}, "bus error",		bus_error,	BUS_ADRERR);
-
-DO_ERROR(SIGTRAP,
-#ifndef CONFIG_MN10300_USING_JTAG
-	 DCR &= ~0x0001,
-#else
-	 {},
-#endif
-	 "single step", istep);
+/*
+ * General exception handler
+ */
+asmlinkage void handle_exception(struct pt_regs *regs, u32 intcode)
+{
+	siginfo_t info;
+
+	/* deal with kernel exceptions here */
+	if (die_if_no_fixup(NULL, regs, intcode))
+		return;
+
+	/* otherwise it's a userspace exception */
+	info.si_signo = exception_to_signal_map[intcode >> 3].signo;
+	info.si_code = exception_to_signal_map[intcode >> 3].si_code;
+	info.si_errno = 0;
+	info.si_addr = (void *) regs->pc;
+	force_sig_info(info.si_signo, &info, current);
+}
 
 /*
  * handle NMI
@@ -113,10 +220,8 @@ DO_ERROR(SIGTRAP,
 asmlinkage void nmi(struct pt_regs *regs, enum exception_code code)
 {
 	/* see if gdbstub wants to deal with it */
-#ifdef CONFIG_GDBSTUB
-	if (gdbstub_intercept(regs, code))
+	if (debugger_intercept(code, SIGQUIT, 0, regs))
 		return;
-#endif
 
 	printk(KERN_WARNING "--- Register Dump ---\n");
 	show_registers(regs);
@@ -128,29 +233,36 @@ asmlinkage void nmi(struct pt_regs *regs, enum exception_code code)
  */
 void show_trace(unsigned long *sp)
 {
-	unsigned long *stack, addr, module_start, module_end;
-	int i;
-
-	printk(KERN_EMERG "\nCall Trace:");
-
-	stack = sp;
-	i = 0;
-	module_start = VMALLOC_START;
-	module_end = VMALLOC_END;
+	unsigned long bottom, stack, addr, fp, raslot;
+
+	printk(KERN_EMERG "\nCall Trace:\n");
+
+	//stack = (unsigned long)sp;
+	asm("mov sp,%0" : "=a"(stack));
+	asm("mov a3,%0" : "=r"(fp));
+
+	raslot = ULONG_MAX;
+	bottom = (stack + THREAD_SIZE) & ~(THREAD_SIZE - 1);
+	for (; stack < bottom; stack += sizeof(addr)) {
+		addr = *(unsigned long *)stack;
+		if (stack == fp) {
+			if (addr > stack && addr < bottom) {
+				fp = addr;
+				raslot = stack + sizeof(addr);
+				continue;
+			}
+			fp = 0;
+			raslot = ULONG_MAX;
+		}
 
-	while (((long) stack & (THREAD_SIZE - 1)) != 0) {
-		addr = *stack++;
 		if (__kernel_text_address(addr)) {
-#if 1
 			printk(" [<%08lx>]", addr);
+			if (stack >= raslot)
+				raslot = ULONG_MAX;
+			else
+				printk(" ?");
 			print_symbol(" %s", addr);
 			printk("\n");
-#else
-			if ((i % 6) == 0)
-				printk(KERN_EMERG "  ");
-			printk("[<%08lx>] ", addr);
-			i++;
-#endif
 		}
 	}
 
@@ -323,86 +435,6 @@ void die(const char *str, struct pt_regs *regs, enum exception_code code)
 }
 
 /*
- * see if there's a fixup handler we can force a jump to when an exception
- * happens due to something kernel code did
- */
-int die_if_no_fixup(const char *str, struct pt_regs *regs,
-		    enum exception_code code)
-{
-	if (user_mode(regs))
-		return 0;
-
-	peripheral_leds_display_exception(code);
-
-	switch (code) {
-		/* see if we can fixup the kernel accessing memory */
-	case EXCEP_ITLBMISS:
-	case EXCEP_DTLBMISS:
-	case EXCEP_IAERROR:
-	case EXCEP_DAERROR:
-	case EXCEP_MEMERR:
-	case EXCEP_MISALIGN:
-	case EXCEP_BUSERROR:
-	case EXCEP_ILLDATACC:
-	case EXCEP_IOINSACC:
-	case EXCEP_PRIVINSACC:
-	case EXCEP_PRIVDATACC:
-	case EXCEP_DATINSACC:
-		if (fixup_exception(regs))
-			return 1;
-	case EXCEP_UNIMPINS:
-		if (regs->pc && *(uint8_t *)regs->pc == 0xff)
-			if (notify_die(DIE_BREAKPOINT, str, regs, code, 0, 0))
-				return 1;
-		break;
-	default:
-		break;
-	}
-
-	/* see if gdbstub wants to deal with it */
-#ifdef CONFIG_GDBSTUB
-	if (gdbstub_intercept(regs, code))
-		return 1;
-#endif
-
-	if (notify_die(DIE_GPF, str, regs, code, 0, 0))
-		return 1;
-
-	/* make the process die as the last resort */
-	die(str, regs, code);
-}
-
-/*
- * handle unsupported syscall instructions (syscall 1-15)
- */
-static asmlinkage void unsupported_syscall(struct pt_regs *regs,
-					   enum exception_code code)
-{
-	struct task_struct *tsk = current;
-	siginfo_t info;
-
-	/* catch a kernel BUG() */
-	if (code == EXCEP_SYSCALL15 && !user_mode(regs)) {
-		if (report_bug(regs->pc, regs) == BUG_TRAP_TYPE_BUG) {
-#ifdef CONFIG_GDBSTUB
-			gdbstub_intercept(regs, code);
-#endif
-		}
-	}
-
-	regs->pc -= 2; /* syscall return addr is _after_ the instruction */
-
-	die_if_no_fixup("An unsupported syscall insn was used by the kernel\n",
-			regs, code);
-
-	info.si_signo	= SIGILL;
-	info.si_errno	= ENOSYS;
-	info.si_code	= ILL_ILLTRP;
-	info.si_addr	= (void *) regs->pc;
-	force_sig_info(SIGILL, &info, tsk);
-}
-
-/*
  * display the register file when the stack pointer gets clobbered
  */
 asmlinkage void do_double_fault(struct pt_regs *regs)
@@ -481,10 +513,8 @@ asmlinkage void uninitialised_exception(struct pt_regs *regs,
 {
 
 	/* see if gdbstub wants to deal with it */
-#ifdef CONFIG_GDBSTUB
-	if (gdbstub_intercept(regs, code))
+	if (debugger_intercept(code, SIGSYS, 0, regs) == 0)
 		return;
-#endif
 
 	peripheral_leds_display_exception(code);
 	printk(KERN_EMERG "Uninitialised Exception 0x%04x\n", code & 0xFFFF);
@@ -549,43 +579,43 @@ void __init set_intr_stub(enum exception_code code, void *handler)
  */
 void __init trap_init(void)
 {
-	set_excp_vector(EXCEP_TRAP,		trap);
-	set_excp_vector(EXCEP_ISTEP,		istep);
-	set_excp_vector(EXCEP_IBREAK,		ibreak);
-	set_excp_vector(EXCEP_OBREAK,		obreak);
-
-	set_excp_vector(EXCEP_PRIVINS,		priv_op);
-	set_excp_vector(EXCEP_UNIMPINS,		invalid_op);
-	set_excp_vector(EXCEP_UNIMPEXINS,	invalid_exop);
-	set_excp_vector(EXCEP_MEMERR,		mem_error);
+	set_excp_vector(EXCEP_TRAP,		handle_exception);
+	set_excp_vector(EXCEP_ISTEP,		handle_exception);
+	set_excp_vector(EXCEP_IBREAK,		handle_exception);
+	set_excp_vector(EXCEP_OBREAK,		handle_exception);
+
+	set_excp_vector(EXCEP_PRIVINS,		handle_exception);
+	set_excp_vector(EXCEP_UNIMPINS,		handle_exception);
+	set_excp_vector(EXCEP_UNIMPEXINS,	handle_exception);
+	set_excp_vector(EXCEP_MEMERR,		handle_exception);
 	set_excp_vector(EXCEP_MISALIGN,		misalignment);
-	set_excp_vector(EXCEP_BUSERROR,		bus_error);
-	set_excp_vector(EXCEP_ILLINSACC,	insn_acc_error);
-	set_excp_vector(EXCEP_ILLDATACC,	data_acc_error);
-	set_excp_vector(EXCEP_IOINSACC,		insn_acc_error);
-	set_excp_vector(EXCEP_PRIVINSACC,	insn_acc_error);
-	set_excp_vector(EXCEP_PRIVDATACC,	data_acc_error);
-	set_excp_vector(EXCEP_DATINSACC,	insn_acc_error);
-	set_excp_vector(EXCEP_FPU_UNIMPINS,	fpu_invalid_op);
+	set_excp_vector(EXCEP_BUSERROR,		handle_exception);
+	set_excp_vector(EXCEP_ILLINSACC,	handle_exception);
+	set_excp_vector(EXCEP_ILLDATACC,	handle_exception);
+	set_excp_vector(EXCEP_IOINSACC,		handle_exception);
+	set_excp_vector(EXCEP_PRIVINSACC,	handle_exception);
+	set_excp_vector(EXCEP_PRIVDATACC,	handle_exception);
+	set_excp_vector(EXCEP_DATINSACC,	handle_exception);
+	set_excp_vector(EXCEP_FPU_UNIMPINS,	handle_exception);
 	set_excp_vector(EXCEP_FPU_OPERATION,	fpu_exception);
 
 	set_excp_vector(EXCEP_NMI,		nmi);
 
-	set_excp_vector(EXCEP_SYSCALL1,		unsupported_syscall);
-	set_excp_vector(EXCEP_SYSCALL2,		unsupported_syscall);
-	set_excp_vector(EXCEP_SYSCALL3,		unsupported_syscall);
-	set_excp_vector(EXCEP_SYSCALL4,		unsupported_syscall);
-	set_excp_vector(EXCEP_SYSCALL5,		unsupported_syscall);
-	set_excp_vector(EXCEP_SYSCALL6,		unsupported_syscall);
-	set_excp_vector(EXCEP_SYSCALL7,		unsupported_syscall);
-	set_excp_vector(EXCEP_SYSCALL8,		unsupported_syscall);
-	set_excp_vector(EXCEP_SYSCALL9,		unsupported_syscall);
-	set_excp_vector(EXCEP_SYSCALL10,	unsupported_syscall);
-	set_excp_vector(EXCEP_SYSCALL11,	unsupported_syscall);
-	set_excp_vector(EXCEP_SYSCALL12,	unsupported_syscall);
-	set_excp_vector(EXCEP_SYSCALL13,	unsupported_syscall);
-	set_excp_vector(EXCEP_SYSCALL14,	unsupported_syscall);
-	set_excp_vector(EXCEP_SYSCALL15,	unsupported_syscall);
+	set_excp_vector(EXCEP_SYSCALL1,		handle_exception);
+	set_excp_vector(EXCEP_SYSCALL2,		handle_exception);
+	set_excp_vector(EXCEP_SYSCALL3,		handle_exception);
+	set_excp_vector(EXCEP_SYSCALL4,		handle_exception);
+	set_excp_vector(EXCEP_SYSCALL5,		handle_exception);
+	set_excp_vector(EXCEP_SYSCALL6,		handle_exception);
+	set_excp_vector(EXCEP_SYSCALL7,		handle_exception);
+	set_excp_vector(EXCEP_SYSCALL8,		handle_exception);
+	set_excp_vector(EXCEP_SYSCALL9,		handle_exception);
+	set_excp_vector(EXCEP_SYSCALL10,	handle_exception);
+	set_excp_vector(EXCEP_SYSCALL11,	handle_exception);
+	set_excp_vector(EXCEP_SYSCALL12,	handle_exception);
+	set_excp_vector(EXCEP_SYSCALL13,	handle_exception);
+	set_excp_vector(EXCEP_SYSCALL14,	handle_exception);
+	set_excp_vector(EXCEP_SYSCALL15,	handle_exception);
 }
 
 /*
diff --git a/arch/mn10300/mm/Kconfig.cache b/arch/mn10300/mm/Kconfig.cache
index c4fd923a55a..bfbe52691f2 100644
--- a/arch/mn10300/mm/Kconfig.cache
+++ b/arch/mn10300/mm/Kconfig.cache
@@ -99,3 +99,49 @@ config MN10300_CACHE_INV_ICACHE
 	help
 	  Set if we need the icache to be invalidated, even if the dcache is in
 	  write-through mode and doesn't need flushing.
+
+#
+# The kernel debugger gets its own separate cache flushing functions
+#
+config MN10300_DEBUGGER_CACHE_FLUSH_BY_TAG
+	def_bool y if KERNEL_DEBUGGER && \
+			MN10300_CACHE_WBACK && \
+			!MN10300_CACHE_SNOOP && \
+			MN10300_CACHE_MANAGE_BY_TAG
+	help
+	  Set if the debugger needs to flush the dcache and invalidate the
+	  icache using the cache tag registers to make breakpoints work.
+
+config MN10300_DEBUGGER_CACHE_FLUSH_BY_REG
+	def_bool y if KERNEL_DEBUGGER && \
+			MN10300_CACHE_WBACK && \
+			!MN10300_CACHE_SNOOP && \
+			MN10300_CACHE_MANAGE_BY_REG
+	help
+	  Set if the debugger needs to flush the dcache and invalidate the
+	  icache using automatic purge registers to make breakpoints work.
+
+config MN10300_DEBUGGER_CACHE_INV_BY_TAG
+	def_bool y if KERNEL_DEBUGGER && \
+			MN10300_CACHE_WTHRU && \
+			!MN10300_CACHE_SNOOP && \
+			MN10300_CACHE_MANAGE_BY_TAG
+	help
+	  Set if the debugger needs to invalidate the icache using the cache
+	  tag registers to make breakpoints work.
+
+config MN10300_DEBUGGER_CACHE_INV_BY_REG
+	def_bool y if KERNEL_DEBUGGER && \
+			MN10300_CACHE_WTHRU && \
+			!MN10300_CACHE_SNOOP && \
+			MN10300_CACHE_MANAGE_BY_REG
+	help
+	  Set if the debugger needs to invalidate the icache using automatic
+	  purge registers to make breakpoints work.
+
+config MN10300_DEBUGGER_CACHE_NO_FLUSH
+	def_bool y if KERNEL_DEBUGGER && \
+			(MN10300_CACHE_DISABLED || MN10300_CACHE_SNOOP)
+	help
+	  Set if the debugger does not need to flush the dcache and/or
+	  invalidate the icache to make breakpoints work.
diff --git a/arch/mn10300/mm/Makefile b/arch/mn10300/mm/Makefile
index 203fee23f7d..11f38466ac2 100644
--- a/arch/mn10300/mm/Makefile
+++ b/arch/mn10300/mm/Makefile
@@ -13,6 +13,15 @@ cacheflush-$(CONFIG_MN10300_CACHE_INV_BY_REG) += cache-inv-by-reg.o
 cacheflush-$(CONFIG_MN10300_CACHE_FLUSH_BY_TAG) += cache-flush-by-tag.o
 cacheflush-$(CONFIG_MN10300_CACHE_FLUSH_BY_REG) += cache-flush-by-reg.o
 
+cacheflush-$(CONFIG_MN10300_DEBUGGER_CACHE_FLUSH_BY_TAG) += \
+	cache-dbg-flush-by-tag.o cache-dbg-inv-by-tag.o
+cacheflush-$(CONFIG_MN10300_DEBUGGER_CACHE_FLUSH_BY_REG) += \
+	cache-dbg-flush-by-reg.o
+cacheflush-$(CONFIG_MN10300_DEBUGGER_CACHE_INV_BY_TAG) += \
+	cache-dbg-inv-by-tag.o cache-dbg-inv.o
+cacheflush-$(CONFIG_MN10300_DEBUGGER_CACHE_INV_BY_REG) += \
+	cache-dbg-inv-by-reg.o cache-dbg-inv.o
+
 cacheflush-$(CONFIG_MN10300_CACHE_DISABLED) := cache-disabled.o
 
 obj-y := \
diff --git a/arch/mn10300/mm/cache-dbg-flush-by-reg.S b/arch/mn10300/mm/cache-dbg-flush-by-reg.S
new file mode 100644
index 00000000000..665919f2ab6
--- /dev/null
+++ b/arch/mn10300/mm/cache-dbg-flush-by-reg.S
@@ -0,0 +1,160 @@
+/* MN10300 CPU cache invalidation routines, using automatic purge registers
+ *
+ * Copyright (C) 2011 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/sys.h>
+#include <linux/linkage.h>
+#include <asm/smp.h>
+#include <asm/page.h>
+#include <asm/cache.h>
+#include <asm/irqflags.h>
+#include <asm/cacheflush.h>
+#include "cache.inc"
+
+	.am33_2
+
+###############################################################################
+#
+# void debugger_local_cache_flushinv(void)
+# Flush the entire data cache back to RAM and invalidate the icache
+#
+###############################################################################
+	ALIGN
+	.globl	debugger_local_cache_flushinv
+        .type	debugger_local_cache_flushinv,@function
+debugger_local_cache_flushinv:
+	#
+	# firstly flush the dcache
+	#
+	movhu	(CHCTR),d0
+	btst	CHCTR_DCEN|CHCTR_ICEN,d0
+	beq	debugger_local_cache_flushinv_end
+
+	mov	DCPGCR,a0
+
+	mov	epsw,d1
+	and	~EPSW_IE,epsw
+	or	EPSW_NMID,epsw
+	nop
+
+	btst	CHCTR_DCEN,d0
+	beq	debugger_local_cache_flushinv_no_dcache
+
+	# wait for busy bit of area purge
+	setlb
+	mov	(a0),d0
+	btst	DCPGCR_DCPGBSY,d0
+	lne
+
+	# set mask
+	clr	d0
+	mov	d0,(DCPGMR)
+
+	# area purge
+	#
+	# DCPGCR = DCPGCR_DCP
+	#
+	mov	DCPGCR_DCP,d0
+	mov	d0,(a0)
+
+	# wait for busy bit of area purge
+	setlb
+	mov	(a0),d0
+	btst	DCPGCR_DCPGBSY,d0
+	lne
+
+debugger_local_cache_flushinv_no_dcache:
+	#
+	# secondly, invalidate the icache if it is enabled
+	#
+	mov	CHCTR,a0
+	movhu	(a0),d0
+	btst	CHCTR_ICEN,d0
+	beq	debugger_local_cache_flushinv_done
+
+	invalidate_icache 0
+
+debugger_local_cache_flushinv_done:
+	mov	d1,epsw
+
+debugger_local_cache_flushinv_end:
+	ret	[],0
+	.size	debugger_local_cache_flushinv,.-debugger_local_cache_flushinv
+
+###############################################################################
+#
+# void debugger_local_cache_flushinv_one(u8 *addr)
+#
+# Invalidate one particular cacheline if it's in the icache
+#
+###############################################################################
+	ALIGN
+	.globl	debugger_local_cache_flushinv_one
+	.type	debugger_local_cache_flushinv_one,@function
+debugger_local_cache_flushinv_one:
+	movhu	(CHCTR),d1
+	btst	CHCTR_DCEN|CHCTR_ICEN,d1
+	beq	debugger_local_cache_flushinv_one_end
+	btst	CHCTR_DCEN,d1
+	beq	debugger_local_cache_flushinv_one_no_dcache
+
+	# round cacheline addr down
+	and	L1_CACHE_TAG_MASK,d0
+	mov	d0,a1
+	mov	d0,d1
+
+	# determine the dcache purge control reg address
+	mov	DCACHE_PURGE(0,0),a0
+	and	L1_CACHE_TAG_ENTRY,d0
+	add	d0,a0
+
+	# retain valid entries in the cache
+	or	L1_CACHE_TAG_VALID,d1
+
+	# conditionally purge this line in all ways
+	mov	d1,(L1_CACHE_WAYDISP*0,a0)
+
+debugger_local_cache_flushinv_no_dcache:
+	#
+	# now try to flush the icache
+	#
+	mov	CHCTR,a0
+	movhu	(a0),d0
+	btst	CHCTR_ICEN,d0
+	beq	mn10300_local_icache_inv_range_reg_end
+
+	LOCAL_CLI_SAVE(d1)
+
+	mov	ICIVCR,a0
+
+	# wait for the invalidator to quiesce
+	setlb
+	mov	(a0),d0
+	btst	ICIVCR_ICIVBSY,d0
+	lne
+
+	# set the mask
+	mov	L1_CACHE_TAG_MASK,d0
+	mov	d0,(ICIVMR)
+
+	# invalidate the cache line at the given address
+	or	ICIVCR_ICI,a1
+	mov	a1,(a0)
+
+	# wait for the invalidator to quiesce again
+	setlb
+	mov	(a0),d0
+	btst	ICIVCR_ICIVBSY,d0
+	lne
+
+	LOCAL_IRQ_RESTORE(d1)
+
+debugger_local_cache_flushinv_one_end:
+	ret	[],0
+	.size	debugger_local_cache_flushinv_one,.-debugger_local_cache_flushinv_one
diff --git a/arch/mn10300/mm/cache-dbg-flush-by-tag.S b/arch/mn10300/mm/cache-dbg-flush-by-tag.S
new file mode 100644
index 00000000000..bf56930e6e7
--- /dev/null
+++ b/arch/mn10300/mm/cache-dbg-flush-by-tag.S
@@ -0,0 +1,114 @@
+/* MN10300 CPU cache invalidation routines, using direct tag flushing
+ *
+ * Copyright (C) 2011 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/sys.h>
+#include <linux/linkage.h>
+#include <asm/smp.h>
+#include <asm/page.h>
+#include <asm/cache.h>
+#include <asm/irqflags.h>
+#include <asm/cacheflush.h>
+#include "cache.inc"
+
+	.am33_2
+
+###############################################################################
+#
+# void debugger_local_cache_flushinv(void)
+#
+# Flush the entire data cache back to RAM and invalidate the icache
+#
+###############################################################################
+	ALIGN
+	.globl	debugger_local_cache_flushinv
+        .type	debugger_local_cache_flushinv,@function
+debugger_local_cache_flushinv:
+	#
+	# firstly flush the dcache
+	#
+	movhu	(CHCTR),d0
+	btst	CHCTR_DCEN|CHCTR_ICEN,d0
+	beq	debugger_local_cache_flushinv_end
+
+	btst	CHCTR_DCEN,d0
+	beq	debugger_local_cache_flushinv_no_dcache
+
+	# read the addresses tagged in the cache's tag RAM and attempt to flush
+	# those addresses specifically
+	# - we rely on the hardware to filter out invalid tag entry addresses
+	mov	DCACHE_TAG(0,0),a0		# dcache tag RAM access address
+	mov	DCACHE_PURGE(0,0),a1		# dcache purge request address
+	mov	L1_CACHE_NWAYS*L1_CACHE_NENTRIES,e0  # total number of entries
+
+mn10300_local_dcache_flush_loop:
+	mov	(a0),d0
+	and	L1_CACHE_TAG_MASK,d0
+	or	L1_CACHE_TAG_VALID,d0		# retain valid entries in the
+						# cache
+	mov	d0,(a1)				# conditional purge
+
+	add	L1_CACHE_BYTES,a0
+	add	L1_CACHE_BYTES,a1
+	add	-1,e0
+	bne	mn10300_local_dcache_flush_loop
+
+debugger_local_cache_flushinv_no_dcache:
+	#
+	# secondly, invalidate the icache if it is enabled
+	#
+	mov	CHCTR,a0
+	movhu	(a0),d0
+	btst	CHCTR_ICEN,d0
+	beq	debugger_local_cache_flushinv_end
+
+	invalidate_icache 1
+
+debugger_local_cache_flushinv_end:
+	ret	[],0
+	.size	debugger_local_cache_flushinv,.-debugger_local_cache_flushinv
+
+###############################################################################
+#
+# void debugger_local_cache_flushinv_one(u8 *addr)
+#
+# Invalidate one particular cacheline if it's in the icache
+#
+###############################################################################
+	ALIGN
+	.globl	debugger_local_cache_flushinv_one
+	.type	debugger_local_cache_flushinv_one,@function
+debugger_local_cache_flushinv_one:
+	movhu	(CHCTR),d1
+	btst	CHCTR_DCEN|CHCTR_ICEN,d1
+	beq	debugger_local_cache_flushinv_one_end
+	btst	CHCTR_DCEN,d1
+	beq	debugger_local_cache_flushinv_one_icache
+
+	# round cacheline addr down
+	and	L1_CACHE_TAG_MASK,d0
+	mov	d0,a1
+
+	# determine the dcache purge control reg address
+	mov	DCACHE_PURGE(0,0),a0
+	and	L1_CACHE_TAG_ENTRY,d0
+	add	d0,a0
+
+	# retain valid entries in the cache
+	or	L1_CACHE_TAG_VALID,a1
+
+	# conditionally purge this line in all ways
+	mov	a1,(L1_CACHE_WAYDISP*0,a0)
+
+	# now go and do the icache
+	bra	debugger_local_cache_flushinv_one_icache
+
+debugger_local_cache_flushinv_one_end:
+	ret	[],0
+	.size	debugger_local_cache_flushinv_one,.-debugger_local_cache_flushinv_one
diff --git a/arch/mn10300/mm/cache-dbg-inv-by-reg.S b/arch/mn10300/mm/cache-dbg-inv-by-reg.S
new file mode 100644
index 00000000000..c4e6252941b
--- /dev/null
+++ b/arch/mn10300/mm/cache-dbg-inv-by-reg.S
@@ -0,0 +1,69 @@
+/* MN10300 CPU cache invalidation routines, using automatic purge registers
+ *
+ * Copyright (C) 2011 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/sys.h>
+#include <linux/linkage.h>
+#include <asm/cache.h>
+#include <asm/irqflags.h>
+#include <asm/cacheflush.h>
+#include "cache.inc"
+
+	.am33_2
+
+	.globl	debugger_local_cache_flushinv_one
+
+###############################################################################
+#
+# void debugger_local_cache_flushinv_one(u8 *addr)
+#
+# Invalidate one particular cacheline if it's in the icache
+#
+###############################################################################
+	ALIGN
+	.globl	debugger_local_cache_flushinv_one
+	.type	debugger_local_cache_flushinv_one,@function
+debugger_local_cache_flushinv_one:
+	mov	d0,a1
+
+	mov	CHCTR,a0
+	movhu	(a0),d0
+	btst	CHCTR_ICEN,d0
+	beq	mn10300_local_icache_inv_range_reg_end
+
+	LOCAL_CLI_SAVE(d1)
+
+	mov	ICIVCR,a0
+
+	# wait for the invalidator to quiesce
+	setlb
+	mov	(a0),d0
+	btst	ICIVCR_ICIVBSY,d0
+	lne
+
+	# set the mask
+	mov	~L1_CACHE_TAG_MASK,d0
+	mov	d0,(ICIVMR)
+
+	# invalidate the cache line at the given address
+	and	~L1_CACHE_TAG_MASK,a1
+	or	ICIVCR_ICI,a1
+	mov	a1,(a0)
+
+	# wait for the invalidator to quiesce again
+	setlb
+	mov	(a0),d0
+	btst	ICIVCR_ICIVBSY,d0
+	lne
+
+	LOCAL_IRQ_RESTORE(d1)
+
+mn10300_local_icache_inv_range_reg_end:
+	ret	[],0
+	.size	debugger_local_cache_flushinv_one,.-debugger_local_cache_flushinv_one
diff --git a/arch/mn10300/mm/cache-dbg-inv-by-tag.S b/arch/mn10300/mm/cache-dbg-inv-by-tag.S
new file mode 100644
index 00000000000..d8ec821e5f8
--- /dev/null
+++ b/arch/mn10300/mm/cache-dbg-inv-by-tag.S
@@ -0,0 +1,120 @@
+/* MN10300 CPU cache invalidation routines, using direct tag flushing
+ *
+ * Copyright (C) 2011 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/sys.h>
+#include <linux/linkage.h>
+#include <asm/smp.h>
+#include <asm/page.h>
+#include <asm/cache.h>
+#include <asm/irqflags.h>
+#include <asm/cacheflush.h>
+#include "cache.inc"
+
+	.am33_2
+
+	.globl	debugger_local_cache_flushinv_one_icache
+
+###############################################################################
+#
+# void debugger_local_cache_flushinv_one(u8 *addr)
+#
+# Invalidate one particular cacheline if it's in the icache
+#
+###############################################################################
+	ALIGN
+	.globl	debugger_local_cache_flushinv_one_icache
+	.type	debugger_local_cache_flushinv_one_icache,@function
+debugger_local_cache_flushinv_one_icache:
+	movm	[d3,a2],(sp)
+
+	mov	CHCTR,a2
+	movhu	(a2),d0
+	btst	CHCTR_ICEN,d0
+	beq	debugger_local_cache_flushinv_one_icache_end
+
+	mov	d0,a1
+	and	L1_CACHE_TAG_MASK,a1
+
+	# read the tags from the tag RAM, and if they indicate a matching valid
+	# cache line then we invalidate that line
+	mov	ICACHE_TAG(0,0),a0
+	mov	a1,d0
+	and	L1_CACHE_TAG_ENTRY,d0
+	add	d0,a0				# starting icache tag RAM
+						# access address
+
+	and	~(L1_CACHE_DISPARITY-1),a1	# determine comparator base
+	or	L1_CACHE_TAG_VALID,a1
+	mov	L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_VALID,d1
+
+	LOCAL_CLI_SAVE(d3)
+
+	# disable the icache
+	movhu	(a2),d0
+	and	~CHCTR_ICEN,d0
+	movhu	d0,(a2)
+
+	# and wait for it to calm down
+	setlb
+	movhu	(a2),d0
+	btst	CHCTR_ICBUSY,d0
+	lne
+
+	# check all the way tags for this cache entry
+	mov	(a0),d0				# read the tag in the way 0 slot
+	xor	a1,d0
+	and	d1,d0
+	beq	debugger_local_icache_kill	# jump if matched
+
+	add	L1_CACHE_WAYDISP,a0
+	mov	(a0),d0				# read the tag in the way 1 slot
+	xor	a1,d0
+	and	d1,d0
+	beq	debugger_local_icache_kill	# jump if matched
+
+	add	L1_CACHE_WAYDISP,a0
+	mov	(a0),d0				# read the tag in the way 2 slot
+	xor	a1,d0
+	and	d1,d0
+	beq	debugger_local_icache_kill	# jump if matched
+
+	add	L1_CACHE_WAYDISP,a0
+	mov	(a0),d0				# read the tag in the way 3 slot
+	xor	a1,d0
+	and	d1,d0
+	bne	debugger_local_icache_finish	# jump if not matched
+
+debugger_local_icache_kill:
+	mov	d0,(a0)				# kill the tag (D0 is 0 at this point)
+
+debugger_local_icache_finish:
+	# wait for the cache to finish what it's doing
+	setlb
+	movhu	(a2),d0
+	btst	CHCTR_ICBUSY,d0
+	lne
+
+	# and reenable it
+	or	CHCTR_ICEN,d0
+	movhu	d0,(a2)
+	movhu	(a2),d0
+
+	# re-enable interrupts
+	LOCAL_IRQ_RESTORE(d3)
+
+debugger_local_cache_flushinv_one_icache_end:
+	ret	[d3,a2],8
+	.size	debugger_local_cache_flushinv_one_icache,.-debugger_local_cache_flushinv_one_icache
+
+#ifdef CONFIG_MN10300_DEBUGGER_CACHE_INV_BY_TAG
+	.globl	debugger_local_cache_flushinv_one
+	.type	debugger_local_cache_flushinv_one,@function
+debugger_local_cache_flushinv_one = debugger_local_cache_flushinv_one_icache
+#endif
diff --git a/arch/mn10300/mm/cache-dbg-inv.S b/arch/mn10300/mm/cache-dbg-inv.S
new file mode 100644
index 00000000000..eba2d6dca06
--- /dev/null
+++ b/arch/mn10300/mm/cache-dbg-inv.S
@@ -0,0 +1,47 @@
+/* MN10300 CPU cache invalidation routines
+ *
+ * Copyright (C) 2011 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/sys.h>
+#include <linux/linkage.h>
+#include <asm/smp.h>
+#include <asm/page.h>
+#include <asm/cache.h>
+#include <asm/irqflags.h>
+#include <asm/cacheflush.h>
+#include "cache.inc"
+
+	.am33_2
+
+	.globl	debugger_local_cache_flushinv
+
+###############################################################################
+#
+# void debugger_local_cache_flushinv(void)
+#
+# Invalidate the entire icache
+#
+###############################################################################
+	ALIGN
+	.globl	debugger_local_cache_flushinv
+        .type	debugger_local_cache_flushinv,@function
+debugger_local_cache_flushinv:
+	#
+	# we only need to invalidate the icache in this cache mode
+	#
+	mov	CHCTR,a0
+	movhu	(a0),d0
+	btst	CHCTR_ICEN,d0
+	beq	debugger_local_cache_flushinv_end
+
+	invalidate_icache 1
+
+debugger_local_cache_flushinv_end:
+	ret	[],0
+	.size	debugger_local_cache_flushinv,.-debugger_local_cache_flushinv
diff --git a/arch/mn10300/mm/cache-flush-by-tag.S b/arch/mn10300/mm/cache-flush-by-tag.S
index 5cd6a27dd63..1ddc0684924 100644
--- a/arch/mn10300/mm/cache-flush-by-tag.S
+++ b/arch/mn10300/mm/cache-flush-by-tag.S
@@ -62,7 +62,7 @@ mn10300_local_dcache_flush:
 
 mn10300_local_dcache_flush_loop:
 	mov	(a0),d0
-	and	L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d0
+	and	L1_CACHE_TAG_MASK,d0
 	or	L1_CACHE_TAG_VALID,d0		# retain valid entries in the
 						# cache
 	mov	d0,(a1)				# conditional purge
@@ -112,11 +112,11 @@ mn10300_local_dcache_flush_range:
 1:
 
 	# round start addr down
-	and	L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d0
+	and	L1_CACHE_TAG_MASK,d0
 	mov	d0,a1
 
 	add	L1_CACHE_BYTES,d1			# round end addr up
-	and	L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d1
+	and	L1_CACHE_TAG_MASK,d1
 
 	# write a request to flush all instances of an address from the cache
 	mov	DCACHE_PURGE(0,0),a0
@@ -215,12 +215,11 @@ mn10300_local_dcache_flush_inv_range:
 	bra	mn10300_local_dcache_flush_inv
 1:
 
-	and	L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d0	# round start
-								# addr down
+	and	L1_CACHE_TAG_MASK,d0		# round start addr down
 	mov	d0,a1
 
-	add	L1_CACHE_BYTES,d1			# round end addr up
-	and	L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d1
+	add	L1_CACHE_BYTES,d1		# round end addr up
+	and	L1_CACHE_TAG_MASK,d1
 
 	# write a request to flush and invalidate all instances of an address
 	# from the cache
diff --git a/arch/mn10300/mm/cache-inv-by-reg.S b/arch/mn10300/mm/cache-inv-by-reg.S
index c8950861ed7..a60825b91e7 100644
--- a/arch/mn10300/mm/cache-inv-by-reg.S
+++ b/arch/mn10300/mm/cache-inv-by-reg.S
@@ -15,6 +15,7 @@
 #include <asm/cache.h>
 #include <asm/irqflags.h>
 #include <asm/cacheflush.h>
+#include "cache.inc"
 
 #define mn10300_local_dcache_inv_range_intr_interval \
 	+((1 << MN10300_DCACHE_INV_RANGE_INTR_LOG2_INTERVAL) - 1)
@@ -62,10 +63,7 @@ mn10300_local_icache_inv:
 	btst	CHCTR_ICEN,d0
 	beq	mn10300_local_icache_inv_end
 
-	# invalidate
-	or	CHCTR_ICINV,d0
-	movhu	d0,(a0)
-	movhu	(a0),d0
+	invalidate_icache 1
 
 mn10300_local_icache_inv_end:
 	ret	[],0
@@ -87,11 +85,8 @@ mn10300_local_dcache_inv:
 	btst	CHCTR_DCEN,d0
 	beq	mn10300_local_dcache_inv_end
 
-	# invalidate
-	or	CHCTR_DCINV,d0
-	movhu	d0,(a0)
-	movhu	(a0),d0
-
+	invalidate_dcache 1
+	
 mn10300_local_dcache_inv_end:
 	ret	[],0
 	.size	mn10300_local_dcache_inv,.-mn10300_local_dcache_inv
@@ -121,9 +116,9 @@ mn10300_local_dcache_inv_range:
 	# and if they're not cacheline-aligned, we must flush any bits outside
 	# the range that share cachelines with stuff inside the range
 #ifdef CONFIG_MN10300_CACHE_WBACK
-	btst	~(L1_CACHE_BYTES-1),d0
+	btst	~L1_CACHE_TAG_MASK,d0
 	bne	1f
-	btst	~(L1_CACHE_BYTES-1),d1
+	btst	~L1_CACHE_TAG_MASK,d1
 	beq	2f
 1:
 	bra	mn10300_local_dcache_flush_inv_range
@@ -141,12 +136,11 @@ mn10300_local_dcache_inv_range:
 	# writeback mode, in which case we would be in flush and invalidate by
 	# now
 #ifndef CONFIG_MN10300_CACHE_WBACK
-	and	L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d0	# round start
-								# addr down
+	and	L1_CACHE_TAG_MASK,d0	# round start addr down
 
 	mov	L1_CACHE_BYTES-1,d2
 	add	d2,d1
-	and	L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d1	# round end addr up
+	and	L1_CACHE_TAG_MASK,d1	# round end addr up
 #endif /* !CONFIG_MN10300_CACHE_WBACK */
 
 	sub	d0,d1,d2		# calculate the total size
diff --git a/arch/mn10300/mm/cache-inv-by-tag.S b/arch/mn10300/mm/cache-inv-by-tag.S
index e9713b40c0f..ccedce9c144 100644
--- a/arch/mn10300/mm/cache-inv-by-tag.S
+++ b/arch/mn10300/mm/cache-inv-by-tag.S
@@ -15,6 +15,7 @@
 #include <asm/cache.h>
 #include <asm/irqflags.h>
 #include <asm/cacheflush.h>
+#include "cache.inc"
 
 #define mn10300_local_dcache_inv_range_intr_interval \
 	+((1 << MN10300_DCACHE_INV_RANGE_INTR_LOG2_INTERVAL) - 1)
@@ -70,43 +71,7 @@ mn10300_local_icache_inv:
 	btst	CHCTR_ICEN,d0
 	beq	mn10300_local_icache_inv_end
 
-#if defined(CONFIG_AM33_2) || defined(CONFIG_AM33_3)
-	LOCAL_CLI_SAVE(d1)
-
-	# disable the icache
-	and	~CHCTR_ICEN,d0
-	movhu	d0,(a0)
-
-	# and wait for it to calm down
-	setlb
-	movhu	(a0),d0
-	btst	CHCTR_ICBUSY,d0
-	lne
-
-	# invalidate
-	or	CHCTR_ICINV,d0
-	movhu	d0,(a0)
-
-	# wait for the cache to finish
-	mov	CHCTR,a0
-	setlb
-	movhu	(a0),d0
-	btst	CHCTR_ICBUSY,d0
-	lne
-
-	# and reenable it
-	and	~CHCTR_ICINV,d0
-	or	CHCTR_ICEN,d0
-	movhu	d0,(a0)
-	movhu	(a0),d0
-
-	LOCAL_IRQ_RESTORE(d1)
-#else /* CONFIG_AM33_2 || CONFIG_AM33_3 */
-	# invalidate
-	or	CHCTR_ICINV,d0
-	movhu	d0,(a0)
-	movhu	(a0),d0
-#endif /* CONFIG_AM33_2 || CONFIG_AM33_3 */
+	invalidate_icache 1
 
 mn10300_local_icache_inv_end:
 	ret	[],0
@@ -128,43 +93,7 @@ mn10300_local_dcache_inv:
 	btst	CHCTR_DCEN,d0
 	beq	mn10300_local_dcache_inv_end
 
-#if defined(CONFIG_AM33_2) || defined(CONFIG_AM33_3)
-	LOCAL_CLI_SAVE(d1)
-
-	# disable the dcache
-	and	~CHCTR_DCEN,d0
-	movhu	d0,(a0)
-
-	# and wait for it to calm down
-	setlb
-	movhu	(a0),d0
-	btst	CHCTR_DCBUSY,d0
-	lne
-
-	# invalidate
-	or	CHCTR_DCINV,d0
-	movhu	d0,(a0)
-
-	# wait for the cache to finish
-	mov	CHCTR,a0
-	setlb
-	movhu	(a0),d0
-	btst	CHCTR_DCBUSY,d0
-	lne
-
-	# and reenable it
-	and	~CHCTR_DCINV,d0
-	or	CHCTR_DCEN,d0
-	movhu	d0,(a0)
-	movhu	(a0),d0
-
-	LOCAL_IRQ_RESTORE(d1)
-#else /* CONFIG_AM33_2 || CONFIG_AM33_3 */
-	# invalidate
-	or	CHCTR_DCINV,d0
-	movhu	d0,(a0)
-	movhu	(a0),d0
-#endif /* CONFIG_AM33_2 || CONFIG_AM33_3 */
+	invalidate_dcache 1
 
 mn10300_local_dcache_inv_end:
 	ret	[],0
@@ -195,9 +124,9 @@ mn10300_local_dcache_inv_range:
 	# and if they're not cacheline-aligned, we must flush any bits outside
 	# the range that share cachelines with stuff inside the range
 #ifdef CONFIG_MN10300_CACHE_WBACK
-	btst	~(L1_CACHE_BYTES-1),d0
+	btst	~L1_CACHE_TAG_MASK,d0
 	bne	1f
-	btst	~(L1_CACHE_BYTES-1),d1
+	btst	~L1_CACHE_TAG_MASK,d1
 	beq	2f
 1:
 	bra	mn10300_local_dcache_flush_inv_range
@@ -212,11 +141,10 @@ mn10300_local_dcache_inv_range:
 	beq	mn10300_local_dcache_inv_range_end
 
 #ifndef CONFIG_MN10300_CACHE_WBACK
-	and	L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d0	# round start
-								# addr down
+	and	L1_CACHE_TAG_MASK,d0		# round start addr down
 
 	add	L1_CACHE_BYTES,d1		# round end addr up
-	and	L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d1
+	and	L1_CACHE_TAG_MASK,d1
 #endif /* !CONFIG_MN10300_CACHE_WBACK */
 	mov	d0,a1
 
diff --git a/arch/mn10300/mm/cache.inc b/arch/mn10300/mm/cache.inc
new file mode 100644
index 00000000000..394a119b9c7
--- /dev/null
+++ b/arch/mn10300/mm/cache.inc
@@ -0,0 +1,133 @@
+/* MN10300 CPU core caching macros -*- asm -*-
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+
+###############################################################################
+#
+# Invalidate the instruction cache.
+#	A0: Should hold CHCTR
+#	D0: Should have been read from CHCTR
+#	D1: Will be clobbered
+#
+# On some cores it is necessary to disable the icache whilst we do this.
+#
+###############################################################################
+	.macro invalidate_icache,disable_irq
+
+#if defined(CONFIG_AM33_2) || defined(CONFIG_AM33_3)
+	.if \disable_irq
+	# don't want an interrupt routine seeing a disabled cache
+	mov	epsw,d1
+	and	~EPSW_IE,epsw
+	or	EPSW_NMID,epsw
+	nop
+	nop
+	.endif
+
+	# disable the icache
+	and	~CHCTR_ICEN,d0
+	movhu	d0,(a0)
+
+	# and wait for it to calm down
+	setlb
+	movhu	(a0),d0
+	btst	CHCTR_ICBUSY,d0
+	lne
+
+	# invalidate
+	or	CHCTR_ICINV,d0
+	movhu	d0,(a0)
+
+	# wait for the cache to finish
+	setlb
+	movhu	(a0),d0
+	btst	CHCTR_ICBUSY,d0
+	lne
+
+	# and reenable it
+	or	CHCTR_ICEN,d0
+	movhu	d0,(a0)
+	movhu	(a0),d0
+
+	.if \disable_irq
+	LOCAL_IRQ_RESTORE(d1)
+	.endif
+
+#else /* CONFIG_AM33_2 || CONFIG_AM33_3 */
+
+	# invalidate
+	or	CHCTR_ICINV,d0
+	movhu	d0,(a0)
+	movhu	(a0),d0
+
+#endif /* CONFIG_AM33_2 || CONFIG_AM33_3 */
+	.endm
+
+###############################################################################
+#
+# Invalidate the data cache.
+#	A0: Should hold CHCTR
+#	D0: Should have been read from CHCTR
+#	D1: Will be clobbered
+#
+# On some cores it is necessary to disable the dcache whilst we do this.
+#
+###############################################################################
+	.macro invalidate_dcache,disable_irq
+
+#if defined(CONFIG_AM33_2) || defined(CONFIG_AM33_3)
+	.if \disable_irq
+	# don't want an interrupt routine seeing a disabled cache
+	mov	epsw,d1
+	and	~EPSW_IE,epsw
+	or	EPSW_NMID,epsw
+	nop
+	nop
+	.endif
+	
+	# disable the dcache
+	and	~CHCTR_DCEN,d0
+	movhu	d0,(a0)
+
+	# and wait for it to calm down
+	setlb
+	movhu	(a0),d0
+	btst	CHCTR_DCBUSY,d0
+	lne
+
+	# invalidate
+	or	CHCTR_DCINV,d0
+	movhu	d0,(a0)
+
+	# wait for the cache to finish
+	setlb
+	movhu	(a0),d0
+	btst	CHCTR_DCBUSY,d0
+	lne
+
+	# and reenable it
+	or	CHCTR_DCEN,d0
+	movhu	d0,(a0)
+	movhu	(a0),d0
+
+	.if \disable_irq
+	LOCAL_IRQ_RESTORE(d1)
+	.endif
+
+#else /* CONFIG_AM33_2 || CONFIG_AM33_3 */
+
+	# invalidate
+	or	CHCTR_DCINV,d0
+	movhu	d0,(a0)
+	movhu	(a0),d0
+
+#endif /* CONFIG_AM33_2 || CONFIG_AM33_3 */
+	.endm
diff --git a/arch/mn10300/mm/fault.c b/arch/mn10300/mm/fault.c
index 59c3da49d9d..0945409a802 100644
--- a/arch/mn10300/mm/fault.c
+++ b/arch/mn10300/mm/fault.c
@@ -28,8 +28,9 @@
 #include <asm/uaccess.h>
 #include <asm/pgalloc.h>
 #include <asm/hardirq.h>
-#include <asm/gdb-stub.h>
 #include <asm/cpu-regs.h>
+#include <asm/debugger.h>
+#include <asm/gdb-stub.h>
 
 /*
  * Unlock any spinlocks which will prevent us from getting the
@@ -306,10 +307,8 @@ no_context:
 	printk(" printing pc:\n");
 	printk(KERN_ALERT "%08lx\n", regs->pc);
 
-#ifdef CONFIG_GDBSTUB
-	gdbstub_intercept(
-		regs, fault_code & 0x00010000 ? EXCEP_IAERROR : EXCEP_DAERROR);
-#endif
+	debugger_intercept(fault_code & 0x00010000 ? EXCEP_IAERROR : EXCEP_DAERROR,
+			   SIGSEGV, SEGV_ACCERR, regs);
 
 	page = PTBR;
 	page = ((unsigned long *) __va(page))[address >> 22];
diff --git a/arch/mn10300/proc-mn103e010/include/proc/cache.h b/arch/mn10300/proc-mn103e010/include/proc/cache.h
index c1528004163..967d144f307 100644
--- a/arch/mn10300/proc-mn103e010/include/proc/cache.h
+++ b/arch/mn10300/proc-mn103e010/include/proc/cache.h
@@ -23,6 +23,7 @@
 #define L1_CACHE_TAG_DIRTY	0x00000008	/* data cache tag dirty bit */
 #define L1_CACHE_TAG_ENTRY	0x00000ff0	/* cache tag entry address mask */
 #define L1_CACHE_TAG_ADDRESS	0xfffff000	/* cache tag line address mask */
+#define L1_CACHE_TAG_MASK	+(L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY)
 
 /*
  * specification of the interval between interrupt checking intervals whilst
diff --git a/arch/mn10300/proc-mn2ws0050/include/proc/cache.h b/arch/mn10300/proc-mn2ws0050/include/proc/cache.h
index cafd7b5b55b..bcb5df2d892 100644
--- a/arch/mn10300/proc-mn2ws0050/include/proc/cache.h
+++ b/arch/mn10300/proc-mn2ws0050/include/proc/cache.h
@@ -29,6 +29,7 @@
 #define L1_CACHE_TAG_DIRTY	0x00000008	/* data cache tag dirty bit */
 #define L1_CACHE_TAG_ENTRY	0x00000fe0	/* cache tag entry address mask */
 #define L1_CACHE_TAG_ADDRESS	0xfffff000	/* cache tag line address mask */
+#define L1_CACHE_TAG_MASK	+(L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY)
 
 /*
  * specification of the interval between interrupt checking intervals whilst
diff --git a/arch/mn10300/unit-asb2364/include/unit/fpga-regs.h b/arch/mn10300/unit-asb2364/include/unit/fpga-regs.h
index 7cf12054db6..33f100f9b46 100644
--- a/arch/mn10300/unit-asb2364/include/unit/fpga-regs.h
+++ b/arch/mn10300/unit-asb2364/include/unit/fpga-regs.h
@@ -14,7 +14,7 @@
 #define ASB2364_FPGA_REG_RESET_USB	__SYSREG(0xa900130c, u16)
 #define ASB2364_FPGA_REG_RESET_AV	__SYSREG(0xa9001310, u16)
 
-#define ASB2364_FPGA_REG_IRQ(X)		__SYSREG(0xa9001590+((X)*4), u16)
+#define ASB2364_FPGA_REG_IRQ(X)		__SYSREG(0xa9001510+((X)*4), u16)
 #define ASB2364_FPGA_REG_IRQ_LAN	ASB2364_FPGA_REG_IRQ(0)
 #define ASB2364_FPGA_REG_IRQ_UART	ASB2364_FPGA_REG_IRQ(1)
 #define ASB2364_FPGA_REG_IRQ_I2C	ASB2364_FPGA_REG_IRQ(2)
diff --git a/arch/mn10300/unit-asb2364/include/unit/serial.h b/arch/mn10300/unit-asb2364/include/unit/serial.h
index 7f048bbfdfd..92f224a97ef 100644
--- a/arch/mn10300/unit-asb2364/include/unit/serial.h
+++ b/arch/mn10300/unit-asb2364/include/unit/serial.h
@@ -59,18 +59,18 @@ static inline void __debug_to_serial(const char *p, int n)
 #define SERIAL_PORT_DFNS /* stolen by gdb-stub */
 
 #if defined(CONFIG_GDBSTUB_ON_TTYS0)
-#define GDBPORT_SERIAL_RX	__SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_RX  * 4, u8)
-#define GDBPORT_SERIAL_TX	__SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_TX  * 4, u8)
-#define GDBPORT_SERIAL_DLL	__SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_DLL * 4, u8)
-#define GDBPORT_SERIAL_DLM	__SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_DLM * 4, u8)
-#define GDBPORT_SERIAL_IER	__SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IER * 4, u8)
-#define GDBPORT_SERIAL_IIR	__SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IIR * 4, u8)
-#define GDBPORT_SERIAL_FCR	__SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_FCR * 4, u8)
-#define GDBPORT_SERIAL_LCR	__SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LCR * 4, u8)
-#define GDBPORT_SERIAL_MCR	__SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MCR * 4, u8)
-#define GDBPORT_SERIAL_LSR	__SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LSR * 4, u8)
-#define GDBPORT_SERIAL_MSR	__SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MSR * 4, u8)
-#define GDBPORT_SERIAL_SCR	__SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_SCR * 4, u8)
+#define GDBPORT_SERIAL_RX	__SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_RX  * 2, u8)
+#define GDBPORT_SERIAL_TX	__SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_TX  * 2, u8)
+#define GDBPORT_SERIAL_DLL	__SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_DLL * 2, u8)
+#define GDBPORT_SERIAL_DLM	__SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_DLM * 2, u8)
+#define GDBPORT_SERIAL_IER	__SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IER * 2, u8)
+#define GDBPORT_SERIAL_IIR	__SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IIR * 2, u8)
+#define GDBPORT_SERIAL_FCR	__SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_FCR * 2, u8)
+#define GDBPORT_SERIAL_LCR	__SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LCR * 2, u8)
+#define GDBPORT_SERIAL_MCR	__SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MCR * 2, u8)
+#define GDBPORT_SERIAL_LSR	__SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LSR * 2, u8)
+#define GDBPORT_SERIAL_MSR	__SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MSR * 2, u8)
+#define GDBPORT_SERIAL_SCR	__SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_SCR * 2, u8)
 #define GDBPORT_SERIAL_IRQ	SERIAL_IRQ
 
 #elif defined(CONFIG_GDBSTUB_ON_TTYS1)
diff --git a/arch/mn10300/unit-asb2364/irq-fpga.c b/arch/mn10300/unit-asb2364/irq-fpga.c
index fcf29754e4d..e16c216f31d 100644
--- a/arch/mn10300/unit-asb2364/irq-fpga.c
+++ b/arch/mn10300/unit-asb2364/irq-fpga.c
@@ -17,38 +17,38 @@
 /*
  * FPGA PIC operations
  */
-static void asb2364_fpga_mask(unsigned int irq)
+static void asb2364_fpga_mask(struct irq_data *d)
 {
-	ASB2364_FPGA_REG_MASK(irq - NR_CPU_IRQS) = 0x0001;
+	ASB2364_FPGA_REG_MASK(d->irq - NR_CPU_IRQS) = 0x0001;
 	SyncExBus();
 }
 
-static void asb2364_fpga_ack(unsigned int irq)
+static void asb2364_fpga_ack(struct irq_data *d)
 {
-	ASB2364_FPGA_REG_IRQ(irq - NR_CPU_IRQS) = 0x0001;
+	ASB2364_FPGA_REG_IRQ(d->irq - NR_CPU_IRQS) = 0x0001;
 	SyncExBus();
 }
 
-static void asb2364_fpga_mask_ack(unsigned int irq)
+static void asb2364_fpga_mask_ack(struct irq_data *d)
 {
-	ASB2364_FPGA_REG_MASK(irq - NR_CPU_IRQS) = 0x0001;
+	ASB2364_FPGA_REG_MASK(d->irq - NR_CPU_IRQS) = 0x0001;
 	SyncExBus();
-	ASB2364_FPGA_REG_IRQ(irq - NR_CPU_IRQS) = 0x0001;
+	ASB2364_FPGA_REG_IRQ(d->irq - NR_CPU_IRQS) = 0x0001;
 	SyncExBus();
 }
 
-static void asb2364_fpga_unmask(unsigned int irq)
+static void asb2364_fpga_unmask(struct irq_data *d)
 {
-	ASB2364_FPGA_REG_MASK(irq - NR_CPU_IRQS) = 0x0000;
+	ASB2364_FPGA_REG_MASK(d->irq - NR_CPU_IRQS) = 0x0000;
 	SyncExBus();
 }
 
 static struct irq_chip asb2364_fpga_pic = {
 	.name		= "fpga",
-	.ack		= asb2364_fpga_ack,
-	.mask		= asb2364_fpga_mask,
-	.mask_ack	= asb2364_fpga_mask_ack,
-	.unmask		= asb2364_fpga_unmask,
+	.irq_ack	= asb2364_fpga_ack,
+	.irq_mask	= asb2364_fpga_mask,
+	.irq_mask_ack	= asb2364_fpga_mask_ack,
+	.irq_unmask	= asb2364_fpga_unmask,
 };
 
 /*
@@ -88,8 +88,20 @@ void __init irq_fpga_init(void)
 {
 	int irq;
 
+	ASB2364_FPGA_REG_MASK_LAN  = 0x0001;
+	SyncExBus();
+	ASB2364_FPGA_REG_MASK_UART = 0x0001;
+	SyncExBus();
+	ASB2364_FPGA_REG_MASK_I2C  = 0x0001;
+	SyncExBus();
+	ASB2364_FPGA_REG_MASK_USB  = 0x0001;
+	SyncExBus();
+	ASB2364_FPGA_REG_MASK_FPGA = 0x0001;
+	SyncExBus();
+
 	for (irq = NR_CPU_IRQS; irq < NR_IRQS; irq++)
-		set_irq_chip_and_handler(irq, &asb2364_fpga_pic, handle_level_irq);
+		irq_set_chip_and_handler(irq, &asb2364_fpga_pic,
+					 handle_level_irq);
 
 	/* the FPGA drives the XIRQ1 input on the CPU PIC */
 	setup_irq(XIRQ1, &fpga_irq[0]);
diff --git a/arch/mn10300/unit-asb2364/unit-init.c b/arch/mn10300/unit-asb2364/unit-init.c
index 11440803db1..6359b41ce7e 100644
--- a/arch/mn10300/unit-asb2364/unit-init.c
+++ b/arch/mn10300/unit-asb2364/unit-init.c
@@ -20,13 +20,41 @@
 #include <asm/processor.h>
 #include <asm/irq.h>
 #include <asm/intctl-regs.h>
+#include <asm/serial-regs.h>
 #include <unit/fpga-regs.h>
+#include <unit/serial.h>
+#include <unit/smsc911x.h>
+
+#define TTYS0_SERIAL_IER	__SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IER * 2, u8)
+#define LAN_IRQ_CFG		__SYSREG(SMSC911X_BASE + 0x54, u32)
+#define LAN_INT_EN		__SYSREG(SMSC911X_BASE + 0x5c, u32)
 
 /*
  * initialise some of the unit hardware before gdbstub is set up
  */
 asmlinkage void __init unit_init(void)
 {
+	/* Make sure we aren't going to get unexpected interrupts */
+	TTYS0_SERIAL_IER = 0;
+	SC0RXICR = 0;
+	SC0TXICR = 0;
+	SC1RXICR = 0;
+	SC1TXICR = 0;
+	SC2RXICR = 0;
+	SC2TXICR = 0;
+
+	/* Attempt to reset the FPGA attached peripherals */
+	ASB2364_FPGA_REG_RESET_LAN = 0x0000;
+	SyncExBus();
+	ASB2364_FPGA_REG_RESET_UART = 0x0000;
+	SyncExBus();
+	ASB2364_FPGA_REG_RESET_I2C = 0x0000;
+	SyncExBus();
+	ASB2364_FPGA_REG_RESET_USB = 0x0000;
+	SyncExBus();
+	ASB2364_FPGA_REG_RESET_AV = 0x0000;
+	SyncExBus();
+
 	/* set up the external interrupts */
 
 	/* XIRQ[0]: NAND RXBY */
@@ -56,7 +84,23 @@ asmlinkage void __init unit_init(void)
  */
 asmlinkage void __init unit_setup(void)
 {
+	/* Release the reset on the SMSC911X so that it is ready by the time we
+	 * need it */
+	ASB2364_FPGA_REG_RESET_LAN = 0x0001;
+	SyncExBus();
+	ASB2364_FPGA_REG_RESET_UART = 0x0001;
+	SyncExBus();
+	ASB2364_FPGA_REG_RESET_I2C = 0x0001;
+	SyncExBus();
+	ASB2364_FPGA_REG_RESET_USB = 0x0001;
+	SyncExBus();
+	ASB2364_FPGA_REG_RESET_AV = 0x0001;
+	SyncExBus();
 
+	/* Make sure the ethernet chipset isn't going to give us an interrupt
+	 * storm from stuff it was doing pre-reset */
+	LAN_IRQ_CFG = 0;
+	LAN_INT_EN = 0;
 }
 
 /*