Merge branch 'for-upstream' of git://openrisc.net/jonas/linux

* 'for-upstream' of git://openrisc.net/jonas/linux: (24 commits)
  OpenRISC: Add MAINTAINERS entry
  OpenRISC: Miscellaneous
  OpenRISC: Library routines
  OpenRISC: Headers
  OpenRISC: Traps
  OpenRISC: Module support
  OpenRISC: GPIO
  OpenRISC: Scheduling/Process management
  OpenRISC: Idle/Power management
  OpenRISC: System calls
  OpenRISC: IRQ
  OpenRISC: Timekeeping
  OpenRISC: DMA
  OpenRISC: PTrace
  OpenRISC: Build infrastructure
  OpenRISC: Signal handling
  OpenRISC: Memory management
  OpenRISC: Device tree
  OpenRISC: Boot code
  iomap: make IOPORT/PCI mapping functions conditional
  ...

1 files changed, 1607 insertions, 0 deletions

diff --git a/arch/openrisc/kernel/head.S b/arch/openrisc/kernel/head.S
new file mode 100644
index 00000000000..c75018d2264
--- /dev/null
+++ b/arch/openrisc/kernel/head.S
@@ -0,0 +1,1607 @@
+/*
+ * OpenRISC head.S
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others.  All original copyrights apply as per the original source
+ * declaration.
+ *
+ * Modifications for the OpenRISC architecture:
+ * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ *
+ *      This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License
+ *      as published by the Free Software Foundation; either version
+ *      2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/linkage.h>
+#include <linux/threads.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <asm/processor.h>
+#include <asm/page.h>
+#include <asm/mmu.h>
+#include <asm/pgtable.h>
+#include <asm/cache.h>
+#include <asm/spr_defs.h>
+#include <asm/asm-offsets.h>
+
+#define tophys(rd,rs)				\
+	l.movhi	rd,hi(-KERNELBASE)		;\
+	l.add	rd,rd,rs
+
+#define CLEAR_GPR(gpr)				\
+	l.or    gpr,r0,r0
+
+#define LOAD_SYMBOL_2_GPR(gpr,symbol)		\
+	l.movhi gpr,hi(symbol)			;\
+	l.ori   gpr,gpr,lo(symbol)
+
+
+#define UART_BASE_ADD      0x90000000
+
+#define EXCEPTION_SR  (SPR_SR_DME | SPR_SR_IME | SPR_SR_DCE | SPR_SR_ICE | SPR_SR_SM)
+#define SYSCALL_SR  (SPR_SR_DME | SPR_SR_IME | SPR_SR_DCE | SPR_SR_ICE | SPR_SR_IEE | SPR_SR_TEE | SPR_SR_SM)
+
+/* ============================================[ tmp store locations ]=== */
+
+/*
+ * emergency_print temporary stores
+ */
+#define EMERGENCY_PRINT_STORE_GPR4	l.sw    0x20(r0),r4
+#define EMERGENCY_PRINT_LOAD_GPR4	l.lwz   r4,0x20(r0)
+
+#define EMERGENCY_PRINT_STORE_GPR5	l.sw    0x24(r0),r5
+#define EMERGENCY_PRINT_LOAD_GPR5	l.lwz   r5,0x24(r0)
+
+#define EMERGENCY_PRINT_STORE_GPR6	l.sw    0x28(r0),r6
+#define EMERGENCY_PRINT_LOAD_GPR6	l.lwz   r6,0x28(r0)
+
+#define EMERGENCY_PRINT_STORE_GPR7	l.sw    0x2c(r0),r7
+#define EMERGENCY_PRINT_LOAD_GPR7	l.lwz   r7,0x2c(r0)
+
+#define EMERGENCY_PRINT_STORE_GPR8	l.sw    0x30(r0),r8
+#define EMERGENCY_PRINT_LOAD_GPR8	l.lwz   r8,0x30(r0)
+
+#define EMERGENCY_PRINT_STORE_GPR9	l.sw    0x34(r0),r9
+#define EMERGENCY_PRINT_LOAD_GPR9	l.lwz   r9,0x34(r0)
+
+
+/*
+ * TLB miss handlers temorary stores
+ */
+#define EXCEPTION_STORE_GPR9		l.sw    0x10(r0),r9
+#define EXCEPTION_LOAD_GPR9		l.lwz   r9,0x10(r0)
+
+#define EXCEPTION_STORE_GPR2		l.sw    0x64(r0),r2
+#define EXCEPTION_LOAD_GPR2		l.lwz   r2,0x64(r0)
+
+#define EXCEPTION_STORE_GPR3		l.sw    0x68(r0),r3
+#define EXCEPTION_LOAD_GPR3		l.lwz   r3,0x68(r0)
+
+#define EXCEPTION_STORE_GPR4		l.sw    0x6c(r0),r4
+#define EXCEPTION_LOAD_GPR4		l.lwz   r4,0x6c(r0)
+
+#define EXCEPTION_STORE_GPR5		l.sw    0x70(r0),r5
+#define EXCEPTION_LOAD_GPR5		l.lwz   r5,0x70(r0)
+
+#define EXCEPTION_STORE_GPR6		l.sw    0x74(r0),r6
+#define EXCEPTION_LOAD_GPR6		l.lwz   r6,0x74(r0)
+
+
+/*
+ * EXCEPTION_HANDLE temporary stores
+ */
+
+#define EXCEPTION_T_STORE_GPR30		l.sw    0x78(r0),r30
+#define EXCEPTION_T_LOAD_GPR30(reg)	l.lwz   reg,0x78(r0)
+
+#define EXCEPTION_T_STORE_GPR10		l.sw    0x7c(r0),r10
+#define EXCEPTION_T_LOAD_GPR10(reg)	l.lwz   reg,0x7c(r0)
+
+#define EXCEPTION_T_STORE_SP		l.sw	0x80(r0),r1
+#define EXCEPTION_T_LOAD_SP(reg)	l.lwz   reg,0x80(r0)
+
+/*
+ * For UNHANLDED_EXCEPTION
+ */
+
+#define EXCEPTION_T_STORE_GPR31		l.sw    0x84(r0),r31
+#define EXCEPTION_T_LOAD_GPR31(reg)	l.lwz   reg,0x84(r0)
+
+/* =========================================================[ macros ]=== */
+
+
+#define GET_CURRENT_PGD(reg,t1)					\
+	LOAD_SYMBOL_2_GPR(reg,current_pgd)			;\
+	tophys  (t1,reg)					;\
+	l.lwz   reg,0(t1)
+
+
+/*
+ * DSCR: this is a common hook for handling exceptions. it will save
+ *       the needed registers, set up stack and pointer to current
+ *	 then jump to the handler while enabling MMU
+ *
+ * PRMS: handler	- a function to jump to. it has to save the
+ *			remaining registers to kernel stack, call
+ *			appropriate arch-independant exception handler
+ *			and finaly jump to ret_from_except
+ *
+ * PREQ: unchanged state from the time exception happened
+ *
+ * POST: SAVED the following registers original value
+ *	       to the new created exception frame pointed to by r1
+ *
+ *	 r1  - ksp	pointing to the new (exception) frame
+ *	 r4  - EEAR     exception EA
+ *	 r10 - current	pointing to current_thread_info struct
+ *	 r12 - syscall  0, since we didn't come from syscall
+ *	 r13 - temp	it actually contains new SR, not needed anymore
+ *	 r31 - handler	address of the handler we'll jump to
+ *
+ *	 handler has to save remaining registers to the exception
+ *	 ksp frame *before* tainting them!
+ *
+ * NOTE: this function is not reentrant per se. reentrancy is guaranteed
+ *       by processor disabling all exceptions/interrupts when exception
+ *	 accours.
+ *
+ * OPTM: no need to make it so wasteful to extract ksp when in user mode
+ */
+
+#define EXCEPTION_HANDLE(handler)				\
+	EXCEPTION_T_STORE_GPR30					;\
+	l.mfspr r30,r0,SPR_ESR_BASE				;\
+	l.andi  r30,r30,SPR_SR_SM				;\
+	l.sfeqi r30,0						;\
+	EXCEPTION_T_STORE_GPR10					;\
+	l.bnf   2f                            /* kernel_mode */	;\
+	 EXCEPTION_T_STORE_SP                 /* delay slot */	;\
+1: /* user_mode:   */						;\
+	LOAD_SYMBOL_2_GPR(r1,current_thread_info_set)		;\
+	tophys  (r30,r1)					;\
+	/* r10: current_thread_info  */				;\
+	l.lwz   r10,0(r30)					;\
+	tophys  (r30,r10)					;\
+	l.lwz   r1,(TI_KSP)(r30)				;\
+	/* fall through */					;\
+2: /* kernel_mode: */						;\
+	/* create new stack frame, save only needed gprs */	;\
+	/* r1: KSP, r10: current, r4: EEAR, r31: __pa(KSP) */	;\
+	/* r12:	temp, syscall indicator */			;\
+	l.addi  r1,r1,-(INT_FRAME_SIZE)				;\
+	/* r1 is KSP, r30 is __pa(KSP) */			;\
+	tophys  (r30,r1)					;\
+	l.sw    PT_GPR12(r30),r12				;\
+	l.mfspr r12,r0,SPR_EPCR_BASE				;\
+	l.sw    PT_PC(r30),r12					;\
+	l.mfspr r12,r0,SPR_ESR_BASE				;\
+	l.sw    PT_SR(r30),r12					;\
+	/* save r30 */						;\
+	EXCEPTION_T_LOAD_GPR30(r12)				;\
+	l.sw	PT_GPR30(r30),r12				;\
+	/* save r10 as was prior to exception */		;\
+	EXCEPTION_T_LOAD_GPR10(r12)				;\
+	l.sw	PT_GPR10(r30),r12				;\
+	/* save PT_SP as was prior to exception */		;\
+	EXCEPTION_T_LOAD_SP(r12)				;\
+	l.sw	PT_SP(r30),r12					;\
+	/* save exception r4, set r4 = EA */			;\
+	l.sw	PT_GPR4(r30),r4					;\
+	l.mfspr r4,r0,SPR_EEAR_BASE				;\
+	/* r12 == 1 if we come from syscall */			;\
+	CLEAR_GPR(r12)						;\
+	/* ----- turn on MMU ----- */				;\
+	l.ori	r30,r0,(EXCEPTION_SR)				;\
+	l.mtspr	r0,r30,SPR_ESR_BASE				;\
+	/* r30:	EA address of handler */			;\
+	LOAD_SYMBOL_2_GPR(r30,handler)				;\
+	l.mtspr r0,r30,SPR_EPCR_BASE				;\
+	l.rfe
+
+/*
+ * this doesn't work
+ *
+ *
+ * #ifdef CONFIG_JUMP_UPON_UNHANDLED_EXCEPTION
+ * #define UNHANDLED_EXCEPTION(handler)				\
+ *	l.ori   r3,r0,0x1					;\
+ *	l.mtspr r0,r3,SPR_SR					;\
+ *      l.movhi r3,hi(0xf0000100)				;\
+ *      l.ori   r3,r3,lo(0xf0000100)				;\
+ *	l.jr	r3						;\
+ *	l.nop	1
+ *
+ * #endif
+ */
+
+/* DSCR: this is the same as EXCEPTION_HANDLE(), we are just
+ *       a bit more carefull (if we have a PT_SP or current pointer
+ *       corruption) and set them up from 'current_set'
+ *
+ */
+#define UNHANDLED_EXCEPTION(handler)				\
+	EXCEPTION_T_STORE_GPR31					;\
+	EXCEPTION_T_STORE_GPR10					;\
+	EXCEPTION_T_STORE_SP					;\
+	/* temporary store r3, r9 into r1, r10 */		;\
+	l.addi	r1,r3,0x0					;\
+	l.addi	r10,r9,0x0					;\
+	/* the string referenced by r3 must be low enough */	;\
+	l.jal	_emergency_print				;\
+	l.ori	r3,r0,lo(_string_unhandled_exception)		;\
+	l.mfspr	r3,r0,SPR_NPC					;\
+	l.jal	_emergency_print_nr				;\
+	l.andi	r3,r3,0x1f00					;\
+	/* the string referenced by r3 must be low enough */	;\
+	l.jal	_emergency_print				;\
+	l.ori	r3,r0,lo(_string_epc_prefix)			;\
+	l.jal	_emergency_print_nr				;\
+	l.mfspr	r3,r0,SPR_EPCR_BASE				;\
+	l.jal	_emergency_print				;\
+	l.ori	r3,r0,lo(_string_nl)				;\
+	/* end of printing */					;\
+	l.addi	r3,r1,0x0					;\
+	l.addi	r9,r10,0x0					;\
+	/* extract current, ksp from current_set */		;\
+	LOAD_SYMBOL_2_GPR(r1,_unhandled_stack_top)		;\
+	LOAD_SYMBOL_2_GPR(r10,init_thread_union)		;\
+	/* create new stack frame, save only needed gprs */	;\
+	/* r1: KSP, r10: current, r31: __pa(KSP) */		;\
+	/* r12:	temp, syscall indicator, r13 temp */		;\
+	l.addi  r1,r1,-(INT_FRAME_SIZE)				;\
+	/* r1 is KSP, r31 is __pa(KSP) */			;\
+	tophys  (r31,r1)					;\
+	l.sw    PT_GPR12(r31),r12					;\
+	l.mfspr r12,r0,SPR_EPCR_BASE				;\
+	l.sw    PT_PC(r31),r12					;\
+	l.mfspr r12,r0,SPR_ESR_BASE				;\
+	l.sw    PT_SR(r31),r12					;\
+	/* save r31 */						;\
+	EXCEPTION_T_LOAD_GPR31(r12)				;\
+	l.sw	PT_GPR31(r31),r12					;\
+	/* save r10 as was prior to exception */		;\
+	EXCEPTION_T_LOAD_GPR10(r12)				;\
+	l.sw	PT_GPR10(r31),r12					;\
+	/* save PT_SP as was prior to exception */			;\
+	EXCEPTION_T_LOAD_SP(r12)				;\
+	l.sw	PT_SP(r31),r12					;\
+	l.sw    PT_GPR13(r31),r13					;\
+	/* --> */						;\
+	/* save exception r4, set r4 = EA */			;\
+	l.sw	PT_GPR4(r31),r4					;\
+	l.mfspr r4,r0,SPR_EEAR_BASE				;\
+	/* r12 == 1 if we come from syscall */			;\
+	CLEAR_GPR(r12)						;\
+	/* ----- play a MMU trick ----- */			;\
+	l.ori	r31,r0,(EXCEPTION_SR)				;\
+	l.mtspr	r0,r31,SPR_ESR_BASE				;\
+	/* r31:	EA address of handler */			;\
+	LOAD_SYMBOL_2_GPR(r31,handler)				;\
+	l.mtspr r0,r31,SPR_EPCR_BASE				;\
+	l.rfe
+
+/* =====================================================[ exceptions] === */
+
+/* ---[ 0x100: RESET exception ]----------------------------------------- */
+    .org 0x100
+	/* Jump to .init code at _start which lives in the .head section
+	 * and will be discarded after boot.
+	 */
+	LOAD_SYMBOL_2_GPR(r4, _start)
+	tophys	(r3,r4)			/* MMU disabled */
+	l.jr	r3
+	 l.nop
+
+/* ---[ 0x200: BUS exception ]------------------------------------------- */
+    .org 0x200
+_dispatch_bus_fault:
+	EXCEPTION_HANDLE(_bus_fault_handler)
+
+/* ---[ 0x300: Data Page Fault exception ]------------------------------- */
+    .org 0x300
+_dispatch_do_dpage_fault:
+//      totaly disable timer interrupt
+// 	l.mtspr	r0,r0,SPR_TTMR
+//	DEBUG_TLB_PROBE(0x300)
+//	EXCEPTION_DEBUG_VALUE_ER_ENABLED(0x300)
+	EXCEPTION_HANDLE(_data_page_fault_handler)
+
+/* ---[ 0x400: Insn Page Fault exception ]------------------------------- */
+    .org 0x400
+_dispatch_do_ipage_fault:
+//      totaly disable timer interrupt
+//	l.mtspr	r0,r0,SPR_TTMR
+//	DEBUG_TLB_PROBE(0x400)
+//	EXCEPTION_DEBUG_VALUE_ER_ENABLED(0x400)
+	EXCEPTION_HANDLE(_insn_page_fault_handler)
+
+/* ---[ 0x500: Timer exception ]----------------------------------------- */
+    .org 0x500
+	EXCEPTION_HANDLE(_timer_handler)
+
+/* ---[ 0x600: Aligment exception ]-------------------------------------- */
+    .org 0x600
+	EXCEPTION_HANDLE(_alignment_handler)
+
+/* ---[ 0x700: Illegal insn exception ]---------------------------------- */
+    .org 0x700
+	EXCEPTION_HANDLE(_illegal_instruction_handler)
+
+/* ---[ 0x800: External interrupt exception ]---------------------------- */
+    .org 0x800
+	EXCEPTION_HANDLE(_external_irq_handler)
+
+/* ---[ 0x900: DTLB miss exception ]------------------------------------- */
+    .org 0x900
+	l.j	boot_dtlb_miss_handler
+	l.nop
+
+/* ---[ 0xa00: ITLB miss exception ]------------------------------------- */
+    .org 0xa00
+	l.j	boot_itlb_miss_handler
+	l.nop
+
+/* ---[ 0xb00: Range exception ]----------------------------------------- */
+    .org 0xb00
+	UNHANDLED_EXCEPTION(_vector_0xb00)
+
+/* ---[ 0xc00: Syscall exception ]--------------------------------------- */
+    .org 0xc00
+	EXCEPTION_HANDLE(_sys_call_handler)
+
+/* ---[ 0xd00: Trap exception ]------------------------------------------ */
+    .org 0xd00
+	UNHANDLED_EXCEPTION(_vector_0xd00)
+
+/* ---[ 0xe00: Trap exception ]------------------------------------------ */
+    .org 0xe00
+//	UNHANDLED_EXCEPTION(_vector_0xe00)
+	EXCEPTION_HANDLE(_trap_handler)
+
+/* ---[ 0xf00: Reserved exception ]-------------------------------------- */
+    .org 0xf00
+	UNHANDLED_EXCEPTION(_vector_0xf00)
+
+/* ---[ 0x1000: Reserved exception ]------------------------------------- */
+    .org 0x1000
+	UNHANDLED_EXCEPTION(_vector_0x1000)
+
+/* ---[ 0x1100: Reserved exception ]------------------------------------- */
+    .org 0x1100
+	UNHANDLED_EXCEPTION(_vector_0x1100)
+
+/* ---[ 0x1200: Reserved exception ]------------------------------------- */
+    .org 0x1200
+	UNHANDLED_EXCEPTION(_vector_0x1200)
+
+/* ---[ 0x1300: Reserved exception ]------------------------------------- */
+    .org 0x1300
+	UNHANDLED_EXCEPTION(_vector_0x1300)
+
+/* ---[ 0x1400: Reserved exception ]------------------------------------- */
+    .org 0x1400
+	UNHANDLED_EXCEPTION(_vector_0x1400)
+
+/* ---[ 0x1500: Reserved exception ]------------------------------------- */
+    .org 0x1500
+	UNHANDLED_EXCEPTION(_vector_0x1500)
+
+/* ---[ 0x1600: Reserved exception ]------------------------------------- */
+    .org 0x1600
+	UNHANDLED_EXCEPTION(_vector_0x1600)
+
+/* ---[ 0x1700: Reserved exception ]------------------------------------- */
+    .org 0x1700
+	UNHANDLED_EXCEPTION(_vector_0x1700)
+
+/* ---[ 0x1800: Reserved exception ]------------------------------------- */
+    .org 0x1800
+	UNHANDLED_EXCEPTION(_vector_0x1800)
+
+/* ---[ 0x1900: Reserved exception ]------------------------------------- */
+    .org 0x1900
+	UNHANDLED_EXCEPTION(_vector_0x1900)
+
+/* ---[ 0x1a00: Reserved exception ]------------------------------------- */
+    .org 0x1a00
+	UNHANDLED_EXCEPTION(_vector_0x1a00)
+
+/* ---[ 0x1b00: Reserved exception ]------------------------------------- */
+    .org 0x1b00
+	UNHANDLED_EXCEPTION(_vector_0x1b00)
+
+/* ---[ 0x1c00: Reserved exception ]------------------------------------- */
+    .org 0x1c00
+	UNHANDLED_EXCEPTION(_vector_0x1c00)
+
+/* ---[ 0x1d00: Reserved exception ]------------------------------------- */
+    .org 0x1d00
+	UNHANDLED_EXCEPTION(_vector_0x1d00)
+
+/* ---[ 0x1e00: Reserved exception ]------------------------------------- */
+    .org 0x1e00
+	UNHANDLED_EXCEPTION(_vector_0x1e00)
+
+/* ---[ 0x1f00: Reserved exception ]------------------------------------- */
+    .org 0x1f00
+	UNHANDLED_EXCEPTION(_vector_0x1f00)
+
+    .org 0x2000
+/* ===================================================[ kernel start ]=== */
+
+/*    .text*/
+
+/* This early stuff belongs in HEAD, but some of the functions below definitely
+ * don't... */
+
+	__HEAD
+	.global _start
+_start:
+	/*
+	 * ensure a deterministic start
+	 */
+
+	l.ori	r3,r0,0x1
+	l.mtspr	r0,r3,SPR_SR
+
+	CLEAR_GPR(r1)
+	CLEAR_GPR(r2)
+	CLEAR_GPR(r3)
+	CLEAR_GPR(r4)
+	CLEAR_GPR(r5)
+	CLEAR_GPR(r6)
+	CLEAR_GPR(r7)
+	CLEAR_GPR(r8)
+	CLEAR_GPR(r9)
+	CLEAR_GPR(r10)
+	CLEAR_GPR(r11)
+	CLEAR_GPR(r12)
+	CLEAR_GPR(r13)
+	CLEAR_GPR(r14)
+	CLEAR_GPR(r15)
+	CLEAR_GPR(r16)
+	CLEAR_GPR(r17)
+	CLEAR_GPR(r18)
+	CLEAR_GPR(r19)
+	CLEAR_GPR(r20)
+	CLEAR_GPR(r21)
+	CLEAR_GPR(r22)
+	CLEAR_GPR(r23)
+	CLEAR_GPR(r24)
+	CLEAR_GPR(r25)
+	CLEAR_GPR(r26)
+	CLEAR_GPR(r27)
+	CLEAR_GPR(r28)
+	CLEAR_GPR(r29)
+	CLEAR_GPR(r30)
+	CLEAR_GPR(r31)
+
+	/*
+	 * set up initial ksp and current
+	 */
+	LOAD_SYMBOL_2_GPR(r1,init_thread_union+0x2000)	// setup kernel stack
+	LOAD_SYMBOL_2_GPR(r10,init_thread_union)	// setup current
+	tophys	(r31,r10)
+	l.sw	TI_KSP(r31), r1
+
+	l.ori	r4,r0,0x0
+
+
+	/*
+	 * .data contains initialized data,
+	 * .bss contains uninitialized data - clear it up
+	 */
+clear_bss:
+	LOAD_SYMBOL_2_GPR(r24, __bss_start)
+	LOAD_SYMBOL_2_GPR(r26, _end)
+	tophys(r28,r24)
+	tophys(r30,r26)
+	CLEAR_GPR(r24)
+	CLEAR_GPR(r26)
+1:
+	l.sw    (0)(r28),r0
+	l.sfltu r28,r30
+	l.bf    1b
+	l.addi  r28,r28,4
+
+enable_ic:
+	l.jal	_ic_enable
+	 l.nop
+
+enable_dc:
+	l.jal	_dc_enable
+	 l.nop
+
+flush_tlb:
+	/*
+	 *  I N V A L I D A T E   T L B   e n t r i e s
+	 */
+	LOAD_SYMBOL_2_GPR(r5,SPR_DTLBMR_BASE(0))
+	LOAD_SYMBOL_2_GPR(r6,SPR_ITLBMR_BASE(0))
+	l.addi	r7,r0,128 /* Maximum number of sets */
+1:
+	l.mtspr	r5,r0,0x0
+	l.mtspr	r6,r0,0x0
+
+	l.addi	r5,r5,1
+	l.addi	r6,r6,1
+	l.sfeq	r7,r0
+	l.bnf	1b
+	 l.addi	r7,r7,-1
+
+
+/* The MMU needs to be enabled before or32_early_setup is called */
+
+enable_mmu:
+	/*
+	 * enable dmmu & immu
+	 * SR[5] = 0, SR[6] = 0, 6th and 7th bit of SR set to 0
+	 */
+	l.mfspr	r30,r0,SPR_SR
+	l.movhi	r28,hi(SPR_SR_DME | SPR_SR_IME)
+	l.ori	r28,r28,lo(SPR_SR_DME | SPR_SR_IME)
+	l.or	r30,r30,r28
+	l.mtspr	r0,r30,SPR_SR
+	l.nop
+	l.nop
+	l.nop
+	l.nop
+	l.nop
+	l.nop
+	l.nop
+	l.nop
+	l.nop
+	l.nop
+	l.nop
+	l.nop
+	l.nop
+	l.nop
+	l.nop
+	l.nop
+
+	// reset the simulation counters
+	l.nop 5
+
+	LOAD_SYMBOL_2_GPR(r24, or32_early_setup)
+	l.jalr r24
+	 l.nop
+
+clear_regs:
+	/*
+	 * clear all GPRS to increase determinism
+	 */
+	CLEAR_GPR(r2)
+	CLEAR_GPR(r3)
+	CLEAR_GPR(r4)
+	CLEAR_GPR(r5)
+	CLEAR_GPR(r6)
+	CLEAR_GPR(r7)
+	CLEAR_GPR(r8)
+	CLEAR_GPR(r9)
+	CLEAR_GPR(r11)
+	CLEAR_GPR(r12)
+	CLEAR_GPR(r13)
+	CLEAR_GPR(r14)
+	CLEAR_GPR(r15)
+	CLEAR_GPR(r16)
+	CLEAR_GPR(r17)
+	CLEAR_GPR(r18)
+	CLEAR_GPR(r19)
+	CLEAR_GPR(r20)
+	CLEAR_GPR(r21)
+	CLEAR_GPR(r22)
+	CLEAR_GPR(r23)
+	CLEAR_GPR(r24)
+	CLEAR_GPR(r25)
+	CLEAR_GPR(r26)
+	CLEAR_GPR(r27)
+	CLEAR_GPR(r28)
+	CLEAR_GPR(r29)
+	CLEAR_GPR(r30)
+	CLEAR_GPR(r31)
+
+jump_start_kernel:
+	/*
+	 * jump to kernel entry (start_kernel)
+	 */
+	LOAD_SYMBOL_2_GPR(r30, start_kernel)
+	l.jr    r30
+	 l.nop
+
+/* ========================================[ cache ]=== */
+
+	/* aligment here so we don't change memory offsets with
+	 * memory controler defined
+	 */
+	.align 0x2000
+
+_ic_enable:
+	/* Check if IC present and skip enabling otherwise */
+	l.mfspr r24,r0,SPR_UPR
+	l.andi  r26,r24,SPR_UPR_ICP
+	l.sfeq  r26,r0
+	l.bf	9f
+	l.nop
+
+	/* Disable IC */
+	l.mfspr r6,r0,SPR_SR
+	l.addi  r5,r0,-1
+	l.xori  r5,r5,SPR_SR_ICE
+	l.and   r5,r6,r5
+	l.mtspr r0,r5,SPR_SR
+
+	/* Establish cache block size
+	   If BS=0, 16;
+	   If BS=1, 32;
+	   r14 contain block size
+	*/
+	l.mfspr r24,r0,SPR_ICCFGR
+	l.andi	r26,r24,SPR_ICCFGR_CBS
+	l.srli	r28,r26,7
+	l.ori	r30,r0,16
+	l.sll	r14,r30,r28
+
+	/* Establish number of cache sets
+	   r16 contains number of cache sets
+	   r28 contains log(# of cache sets)
+	*/
+	l.andi  r26,r24,SPR_ICCFGR_NCS
+	l.srli 	r28,r26,3
+	l.ori   r30,r0,1
+	l.sll   r16,r30,r28
+
+	/* Invalidate IC */
+	l.addi  r6,r0,0
+	l.sll   r5,r14,r28
+//        l.mul   r5,r14,r16
+//	l.trap  1
+//	l.addi  r5,r0,IC_SIZE
+1:
+	l.mtspr r0,r6,SPR_ICBIR
+	l.sfne  r6,r5
+	l.bf    1b
+	l.add   r6,r6,r14
+ //       l.addi   r6,r6,IC_LINE
+
+	/* Enable IC */
+	l.mfspr r6,r0,SPR_SR
+	l.ori   r6,r6,SPR_SR_ICE
+	l.mtspr r0,r6,SPR_SR
+	l.nop
+	l.nop
+	l.nop
+	l.nop
+	l.nop
+	l.nop
+	l.nop
+	l.nop
+	l.nop
+	l.nop
+9:
+	l.jr    r9
+	l.nop
+
+_dc_enable:
+	/* Check if DC present and skip enabling otherwise */
+	l.mfspr r24,r0,SPR_UPR
+	l.andi  r26,r24,SPR_UPR_DCP
+	l.sfeq  r26,r0
+	l.bf	9f
+	l.nop
+
+	/* Disable DC */
+	l.mfspr r6,r0,SPR_SR
+	l.addi  r5,r0,-1
+	l.xori  r5,r5,SPR_SR_DCE
+	l.and   r5,r6,r5
+	l.mtspr r0,r5,SPR_SR
+
+	/* Establish cache block size
+	   If BS=0, 16;
+	   If BS=1, 32;
+	   r14 contain block size
+	*/
+	l.mfspr r24,r0,SPR_DCCFGR
+	l.andi	r26,r24,SPR_DCCFGR_CBS
+	l.srli	r28,r26,7
+	l.ori	r30,r0,16
+	l.sll	r14,r30,r28
+
+	/* Establish number of cache sets
+	   r16 contains number of cache sets
+	   r28 contains log(# of cache sets)
+	*/
+	l.andi  r26,r24,SPR_DCCFGR_NCS
+	l.srli 	r28,r26,3
+	l.ori   r30,r0,1
+	l.sll   r16,r30,r28
+
+	/* Invalidate DC */
+	l.addi  r6,r0,0
+	l.sll   r5,r14,r28
+1:
+	l.mtspr r0,r6,SPR_DCBIR
+	l.sfne  r6,r5
+	l.bf    1b
+	l.add   r6,r6,r14
+
+	/* Enable DC */
+	l.mfspr r6,r0,SPR_SR
+	l.ori   r6,r6,SPR_SR_DCE
+	l.mtspr r0,r6,SPR_SR
+9:
+	l.jr    r9
+	l.nop
+
+/* ===============================================[ page table masks ]=== */
+
+/* bit 4 is used in hardware as write back cache bit. we never use this bit
+ * explicitly, so we can reuse it as _PAGE_FILE bit and mask it out when
+ * writing into hardware pte's
+ */
+
+#define DTLB_UP_CONVERT_MASK  0x3fa
+#define ITLB_UP_CONVERT_MASK  0x3a
+
+/* for SMP we'd have (this is a bit subtle, CC must be always set
+ * for SMP, but since we have _PAGE_PRESENT bit always defined
+ * we can just modify the mask)
+ */
+#define DTLB_SMP_CONVERT_MASK  0x3fb
+#define ITLB_SMP_CONVERT_MASK  0x3b
+
+/* ---[ boot dtlb miss handler ]----------------------------------------- */
+
+boot_dtlb_miss_handler:
+
+/* mask for DTLB_MR register: - (0) sets V (valid) bit,
+ *                            - (31-12) sets bits belonging to VPN (31-12)
+ */
+#define DTLB_MR_MASK 0xfffff001
+
+/* mask for DTLB_TR register: - (2) sets CI (cache inhibit) bit,
+ *			      - (4) sets A (access) bit,
+ *                            - (5) sets D (dirty) bit,
+ *                            - (8) sets SRE (superuser read) bit
+ *                            - (9) sets SWE (superuser write) bit
+ *                            - (31-12) sets bits belonging to VPN (31-12)
+ */
+#define DTLB_TR_MASK 0xfffff332
+
+/* These are for masking out the VPN/PPN value from the MR/TR registers...
+ * it's not the same as the PFN */
+#define VPN_MASK 0xfffff000
+#define PPN_MASK 0xfffff000
+
+
+	EXCEPTION_STORE_GPR6
+
+#if 0
+	l.mfspr r6,r0,SPR_ESR_BASE	   //
+	l.andi  r6,r6,SPR_SR_SM            // are we in kernel mode ?
+	l.sfeqi r6,0                       // r6 == 0x1 --> SM
+	l.bf    exit_with_no_dtranslation  //
+	l.nop
+#endif
+
+	/* this could be optimized by moving storing of
+	 * non r6 registers here, and jumping r6 restore
+	 * if not in supervisor mode
+	 */
+
+	EXCEPTION_STORE_GPR2
+	EXCEPTION_STORE_GPR3
+	EXCEPTION_STORE_GPR4
+	EXCEPTION_STORE_GPR5
+
+	l.mfspr r4,r0,SPR_EEAR_BASE        // get the offending EA
+
+immediate_translation:
+	CLEAR_GPR(r6)
+
+	l.srli	r3,r4,0xd                  // r3 <- r4 / 8192 (sets are relative to page size (8Kb) NOT VPN size (4Kb)
+
+	l.mfspr r6, r0, SPR_DMMUCFGR
+	l.andi	r6, r6, SPR_DMMUCFGR_NTS
+	l.srli	r6, r6, SPR_DMMUCFGR_NTS_OFF
+	l.ori	r5, r0, 0x1
+	l.sll	r5, r5, r6 	// r5 = number DMMU sets
+	l.addi	r6, r5, -1  	// r6 = nsets mask
+	l.and	r2, r3, r6	// r2 <- r3 % NSETS_MASK
+
+	l.or    r6,r6,r4                   // r6 <- r4
+	l.ori   r6,r6,~(VPN_MASK)          // r6 <- VPN :VPN .xfff - clear up lo(r6) to 0x**** *fff
+	l.movhi r5,hi(DTLB_MR_MASK)        // r5 <- ffff:0000.x000
+	l.ori   r5,r5,lo(DTLB_MR_MASK)     // r5 <- ffff:1111.x001 - apply DTLB_MR_MASK
+	l.and   r5,r5,r6                   // r5 <- VPN :VPN .x001 - we have DTLBMR entry
+	l.mtspr r2,r5,SPR_DTLBMR_BASE(0)   // set DTLBMR
+
+	/* set up DTLB with no translation for EA <= 0xbfffffff */
+	LOAD_SYMBOL_2_GPR(r6,0xbfffffff)
+	l.sfgeu  r6,r4                     // flag if r6 >= r4 (if 0xbfffffff >= EA)
+	l.bf     1f                        // goto out
+	l.and    r3,r4,r4                  // delay slot :: 24 <- r4 (if flag==1)
+
+	tophys(r3,r4)                      // r3 <- PA
+1:
+	l.ori   r3,r3,~(PPN_MASK)          // r3 <- PPN :PPN .xfff - clear up lo(r6) to 0x**** *fff
+	l.movhi r5,hi(DTLB_TR_MASK)        // r5 <- ffff:0000.x000
+	l.ori   r5,r5,lo(DTLB_TR_MASK)     // r5 <- ffff:1111.x330 - apply DTLB_MR_MASK
+	l.and   r5,r5,r3                   // r5 <- PPN :PPN .x330 - we have DTLBTR entry
+	l.mtspr r2,r5,SPR_DTLBTR_BASE(0)   // set DTLBTR
+
+	EXCEPTION_LOAD_GPR6
+	EXCEPTION_LOAD_GPR5
+	EXCEPTION_LOAD_GPR4
+	EXCEPTION_LOAD_GPR3
+	EXCEPTION_LOAD_GPR2
+
+	l.rfe                              // SR <- ESR, PC <- EPC
+
+exit_with_no_dtranslation:
+	/* EA out of memory or not in supervisor mode */
+	EXCEPTION_LOAD_GPR6
+	EXCEPTION_LOAD_GPR4
+	l.j	_dispatch_bus_fault
+
+/* ---[ boot itlb miss handler ]----------------------------------------- */
+
+boot_itlb_miss_handler:
+
+/* mask for ITLB_MR register: - sets V (valid) bit,
+ *                            - sets bits belonging to VPN (15-12)
+ */
+#define ITLB_MR_MASK 0xfffff001
+
+/* mask for ITLB_TR register: - sets A (access) bit,
+ *                            - sets SXE (superuser execute) bit
+ *                            - sets bits belonging to VPN (15-12)
+ */
+#define ITLB_TR_MASK 0xfffff050
+
+/*
+#define VPN_MASK 0xffffe000
+#define PPN_MASK 0xffffe000
+*/
+
+
+
+	EXCEPTION_STORE_GPR2
+	EXCEPTION_STORE_GPR3
+	EXCEPTION_STORE_GPR4
+	EXCEPTION_STORE_GPR5
+	EXCEPTION_STORE_GPR6
+
+#if 0
+	l.mfspr r6,r0,SPR_ESR_BASE         //
+	l.andi  r6,r6,SPR_SR_SM            // are we in kernel mode ?
+	l.sfeqi r6,0                       // r6 == 0x1 --> SM
+	l.bf    exit_with_no_itranslation
+	l.nop
+#endif
+
+
+	l.mfspr r4,r0,SPR_EEAR_BASE        // get the offending EA
+
+earlyearly:
+	CLEAR_GPR(r6)
+
+	l.srli  r3,r4,0xd                  // r3 <- r4 / 8192 (sets are relative to page size (8Kb) NOT VPN size (4Kb)
+
+	l.mfspr r6, r0, SPR_IMMUCFGR
+	l.andi	r6, r6, SPR_IMMUCFGR_NTS
+	l.srli	r6, r6, SPR_IMMUCFGR_NTS_OFF
+	l.ori	r5, r0, 0x1
+	l.sll	r5, r5, r6 	// r5 = number IMMU sets from IMMUCFGR
+	l.addi	r6, r5, -1  	// r6 = nsets mask
+	l.and	r2, r3, r6	// r2 <- r3 % NSETS_MASK
+
+	l.or    r6,r6,r4                   // r6 <- r4
+	l.ori   r6,r6,~(VPN_MASK)          // r6 <- VPN :VPN .xfff - clear up lo(r6) to 0x**** *fff
+	l.movhi r5,hi(ITLB_MR_MASK)        // r5 <- ffff:0000.x000
+	l.ori   r5,r5,lo(ITLB_MR_MASK)     // r5 <- ffff:1111.x001 - apply ITLB_MR_MASK
+	l.and   r5,r5,r6                   // r5 <- VPN :VPN .x001 - we have ITLBMR entry
+	l.mtspr r2,r5,SPR_ITLBMR_BASE(0)   // set ITLBMR
+
+	/*
+	 * set up ITLB with no translation for EA <= 0x0fffffff
+	 *
+	 * we need this for head.S mapping (EA = PA). if we move all functions
+	 * which run with mmu enabled into entry.S, we might be able to eliminate this.
+	 *
+	 */
+	LOAD_SYMBOL_2_GPR(r6,0x0fffffff)
+	l.sfgeu  r6,r4                     // flag if r6 >= r4 (if 0xb0ffffff >= EA)
+	l.bf     1f                        // goto out
+	l.and    r3,r4,r4                  // delay slot :: 24 <- r4 (if flag==1)
+
+	tophys(r3,r4)                      // r3 <- PA
+1:
+	l.ori   r3,r3,~(PPN_MASK)          // r3 <- PPN :PPN .xfff - clear up lo(r6) to 0x**** *fff
+	l.movhi r5,hi(ITLB_TR_MASK)        // r5 <- ffff:0000.x000
+	l.ori   r5,r5,lo(ITLB_TR_MASK)     // r5 <- ffff:1111.x050 - apply ITLB_MR_MASK
+	l.and   r5,r5,r3                   // r5 <- PPN :PPN .x050 - we have ITLBTR entry
+	l.mtspr r2,r5,SPR_ITLBTR_BASE(0)   // set ITLBTR
+
+	EXCEPTION_LOAD_GPR6
+	EXCEPTION_LOAD_GPR5
+	EXCEPTION_LOAD_GPR4
+	EXCEPTION_LOAD_GPR3
+	EXCEPTION_LOAD_GPR2
+
+	l.rfe                              // SR <- ESR, PC <- EPC
+
+exit_with_no_itranslation:
+	EXCEPTION_LOAD_GPR4
+	EXCEPTION_LOAD_GPR6
+	l.j    _dispatch_bus_fault
+	l.nop
+
+/* ====================================================================== */
+/*
+ * Stuff below here shouldn't go into .head section... maybe this stuff
+ * can be moved to entry.S ???
+ */
+
+/* ==============================================[ DTLB miss handler ]=== */
+
+/*
+ * Comments:
+ *   Exception handlers are entered with MMU off so the following handler
+ *   needs to use physical addressing
+ *
+ */
+
+	.text
+ENTRY(dtlb_miss_handler)
+	EXCEPTION_STORE_GPR2
+	EXCEPTION_STORE_GPR3
+	EXCEPTION_STORE_GPR4
+	EXCEPTION_STORE_GPR5
+	EXCEPTION_STORE_GPR6
+	/*
+	 * get EA of the miss
+	 */
+	l.mfspr	r2,r0,SPR_EEAR_BASE
+	/*
+	 * pmd = (pmd_t *)(current_pgd + pgd_index(daddr));
+	 */
+	GET_CURRENT_PGD(r3,r5)		// r3 is current_pgd, r5 is temp
+	l.srli	r4,r2,0x18		// >> PAGE_SHIFT + (PAGE_SHIFT - 2)
+	l.slli	r4,r4,0x2		// to get address << 2
+	l.add	r5,r4,r3		// r4 is pgd_index(daddr)
+	/*
+	 * if (pmd_none(*pmd))
+	 *   goto pmd_none:
+	 */
+	tophys	(r4,r5)
+	l.lwz	r3,0x0(r4)		// get *pmd value
+	l.sfne	r3,r0
+	l.bnf	d_pmd_none
+	 l.andi	r3,r3,~PAGE_MASK //0x1fff		// ~PAGE_MASK
+	/*
+	 * if (pmd_bad(*pmd))
+	 *   pmd_clear(pmd)
+	 *   goto pmd_bad:
+	 */
+//	l.sfeq	r3,r0			// check *pmd value
+//	l.bf	d_pmd_good
+	l.addi	r3,r0,0xffffe000	// PAGE_MASK
+//	l.j	d_pmd_bad
+//	l.sw	0x0(r4),r0		// clear pmd
+d_pmd_good:
+	/*
+	 * pte = *pte_offset(pmd, daddr);
+	 */
+	l.lwz	r4,0x0(r4)		// get **pmd value
+	l.and	r4,r4,r3		// & PAGE_MASK
+	l.srli	r5,r2,0xd		// >> PAGE_SHIFT, r2 == EEAR
+	l.andi	r3,r5,0x7ff		// (1UL << PAGE_SHIFT - 2) - 1
+	l.slli	r3,r3,0x2		// to get address << 2
+	l.add	r3,r3,r4
+	l.lwz	r2,0x0(r3)		// this is pte at last
+	/*
+	 * if (!pte_present(pte))
+	 */
+	l.andi	r4,r2,0x1
+	l.sfne	r4,r0			// is pte present
+	l.bnf	d_pte_not_present
+	l.addi	r3,r0,0xffffe3fa	// PAGE_MASK | DTLB_UP_CONVERT_MASK
+	/*
+	 * fill DTLB TR register
+	 */
+	l.and	r4,r2,r3		// apply the mask
+	// Determine number of DMMU sets
+	l.mfspr r6, r0, SPR_DMMUCFGR
+	l.andi	r6, r6, SPR_DMMUCFGR_NTS
+	l.srli	r6, r6, SPR_DMMUCFGR_NTS_OFF
+	l.ori	r3, r0, 0x1
+	l.sll	r3, r3, r6 	// r3 = number DMMU sets DMMUCFGR
+	l.addi	r6, r3, -1  	// r6 = nsets mask
+	l.and	r5, r5, r6	// calc offset:	 & (NUM_TLB_ENTRIES-1)
+	                                                   //NUM_TLB_ENTRIES
+	l.mtspr	r5,r4,SPR_DTLBTR_BASE(0)
+	/*
+	 * fill DTLB MR register
+	 */
+	l.mfspr	r2,r0,SPR_EEAR_BASE
+	l.addi	r3,r0,0xffffe000	// PAGE_MASK
+	l.and	r4,r2,r3		// apply PAGE_MASK to EA (__PHX__ do we really need this?)
+	l.ori	r4,r4,0x1		// set hardware valid bit: DTBL_MR entry
+	l.mtspr	r5,r4,SPR_DTLBMR_BASE(0)
+
+	EXCEPTION_LOAD_GPR2
+	EXCEPTION_LOAD_GPR3
+	EXCEPTION_LOAD_GPR4
+	EXCEPTION_LOAD_GPR5
+	EXCEPTION_LOAD_GPR6
+	l.rfe
+d_pmd_bad:
+	l.nop	1
+	EXCEPTION_LOAD_GPR2
+	EXCEPTION_LOAD_GPR3
+	EXCEPTION_LOAD_GPR4
+	EXCEPTION_LOAD_GPR5
+	EXCEPTION_LOAD_GPR6
+	l.rfe
+d_pmd_none:
+d_pte_not_present:
+	EXCEPTION_LOAD_GPR2
+	EXCEPTION_LOAD_GPR3
+	EXCEPTION_LOAD_GPR4
+	EXCEPTION_LOAD_GPR5
+	EXCEPTION_LOAD_GPR6
+	l.j	_dispatch_do_dpage_fault
+	l.nop
+
+/* ==============================================[ ITLB miss handler ]=== */
+ENTRY(itlb_miss_handler)
+	EXCEPTION_STORE_GPR2
+	EXCEPTION_STORE_GPR3
+	EXCEPTION_STORE_GPR4
+	EXCEPTION_STORE_GPR5
+	EXCEPTION_STORE_GPR6
+	/*
+	 * get EA of the miss
+	 */
+	l.mfspr	r2,r0,SPR_EEAR_BASE
+
+	/*
+	 * pmd = (pmd_t *)(current_pgd + pgd_index(daddr));
+	 *
+	 */
+	GET_CURRENT_PGD(r3,r5)		// r3 is current_pgd, r5 is temp
+	l.srli	r4,r2,0x18		// >> PAGE_SHIFT + (PAGE_SHIFT - 2)
+	l.slli	r4,r4,0x2		// to get address << 2
+	l.add	r5,r4,r3		// r4 is pgd_index(daddr)
+	/*
+	 * if (pmd_none(*pmd))
+	 *   goto pmd_none:
+	 */
+	tophys	(r4,r5)
+	l.lwz	r3,0x0(r4)		// get *pmd value
+	l.sfne	r3,r0
+	l.bnf	i_pmd_none
+	l.andi	r3,r3,0x1fff		// ~PAGE_MASK
+	/*
+	 * if (pmd_bad(*pmd))
+	 *   pmd_clear(pmd)
+	 *   goto pmd_bad:
+	 */
+
+//	l.sfeq	r3,r0			// check *pmd value
+//	l.bf	i_pmd_good
+	l.addi	r3,r0,0xffffe000	// PAGE_MASK
+//	l.j	i_pmd_bad
+//	l.sw	0x0(r4),r0		// clear pmd
+
+i_pmd_good:
+	/*
+	 * pte = *pte_offset(pmd, iaddr);
+	 *
+	 */
+	l.lwz	r4,0x0(r4)		// get **pmd value
+	l.and	r4,r4,r3		// & PAGE_MASK
+	l.srli	r5,r2,0xd		// >> PAGE_SHIFT, r2 == EEAR
+	l.andi	r3,r5,0x7ff		// (1UL << PAGE_SHIFT - 2) - 1
+	l.slli	r3,r3,0x2		// to get address << 2
+	l.add	r3,r3,r4
+	l.lwz	r2,0x0(r3)		// this is pte at last
+	/*
+	 * if (!pte_present(pte))
+	 *
+	 */
+	l.andi	r4,r2,0x1
+	l.sfne	r4,r0			// is pte present
+	l.bnf	i_pte_not_present
+	l.addi	r3,r0,0xffffe03a	// PAGE_MASK | ITLB_UP_CONVERT_MASK
+	/*
+	 * fill ITLB TR register
+	 */
+	l.and	r4,r2,r3		// apply the mask
+	l.andi	r3,r2,0x7c0		// _PAGE_EXEC | _PAGE_SRE | _PAGE_SWE |  _PAGE_URE | _PAGE_UWE
+//	l.andi	r3,r2,0x400		// _PAGE_EXEC
+	l.sfeq	r3,r0
+	l.bf	itlb_tr_fill //_workaround
+	// Determine number of IMMU sets
+	l.mfspr r6, r0, SPR_IMMUCFGR
+	l.andi	r6, r6, SPR_IMMUCFGR_NTS
+	l.srli	r6, r6, SPR_IMMUCFGR_NTS_OFF
+	l.ori	r3, r0, 0x1
+	l.sll	r3, r3, r6 	// r3 = number IMMU sets IMMUCFGR
+	l.addi	r6, r3, -1  	// r6 = nsets mask
+	l.and	r5, r5, r6	// calc offset:	 & (NUM_TLB_ENTRIES-1)
+
+/*
+ * __PHX__ :: fixme
+ * we should not just blindly set executable flags,
+ * but it does help with ping. the clean way would be to find out
+ * (and fix it) why stack doesn't have execution permissions
+ */
+
+itlb_tr_fill_workaround:
+	l.ori	r4,r4,0xc0		// | (SPR_ITLBTR_UXE | ITLBTR_SXE)
+itlb_tr_fill:
+	l.mtspr	r5,r4,SPR_ITLBTR_BASE(0)
+	/*
+	 * fill DTLB MR register
+	 */
+	l.mfspr	r2,r0,SPR_EEAR_BASE
+	l.addi	r3,r0,0xffffe000	// PAGE_MASK
+	l.and	r4,r2,r3		// apply PAGE_MASK to EA (__PHX__ do we really need this?)
+	l.ori	r4,r4,0x1		// set hardware valid bit: DTBL_MR entry
+	l.mtspr	r5,r4,SPR_ITLBMR_BASE(0)
+
+	EXCEPTION_LOAD_GPR2
+	EXCEPTION_LOAD_GPR3
+	EXCEPTION_LOAD_GPR4
+	EXCEPTION_LOAD_GPR5
+	EXCEPTION_LOAD_GPR6
+	l.rfe
+
+i_pmd_bad:
+	l.nop	1
+	EXCEPTION_LOAD_GPR2
+	EXCEPTION_LOAD_GPR3
+	EXCEPTION_LOAD_GPR4
+	EXCEPTION_LOAD_GPR5
+	EXCEPTION_LOAD_GPR6
+	l.rfe
+i_pmd_none:
+i_pte_not_present:
+	EXCEPTION_LOAD_GPR2
+	EXCEPTION_LOAD_GPR3
+	EXCEPTION_LOAD_GPR4
+	EXCEPTION_LOAD_GPR5
+	EXCEPTION_LOAD_GPR6
+	l.j	_dispatch_do_ipage_fault
+	l.nop
+
+/* ==============================================[ boot tlb handlers ]=== */
+
+
+/* =================================================[ debugging aids ]=== */
+
+	.align 64
+_immu_trampoline:
+	.space 64
+_immu_trampoline_top:
+
+#define TRAMP_SLOT_0		(0x0)
+#define TRAMP_SLOT_1		(0x4)
+#define TRAMP_SLOT_2		(0x8)
+#define TRAMP_SLOT_3		(0xc)
+#define TRAMP_SLOT_4		(0x10)
+#define TRAMP_SLOT_5		(0x14)
+#define TRAMP_FRAME_SIZE	(0x18)
+
+ENTRY(_immu_trampoline_workaround)
+	// r2 EEA
+	// r6 is physical EEA
+	tophys(r6,r2)
+
+	LOAD_SYMBOL_2_GPR(r5,_immu_trampoline)
+	tophys	(r3,r5)			// r3 is trampoline (physical)
+
+	LOAD_SYMBOL_2_GPR(r4,0x15000000)
+	l.sw	TRAMP_SLOT_0(r3),r4
+	l.sw	TRAMP_SLOT_1(r3),r4
+	l.sw	TRAMP_SLOT_4(r3),r4
+	l.sw	TRAMP_SLOT_5(r3),r4
+
+					// EPC = EEA - 0x4
+	l.lwz	r4,0x0(r6)		// load op @ EEA + 0x0 (fc address)
+	l.sw	TRAMP_SLOT_3(r3),r4	// store it to _immu_trampoline_data
+	l.lwz	r4,-0x4(r6)		// load op @ EEA - 0x4 (f8 address)
+	l.sw	TRAMP_SLOT_2(r3),r4	// store it to _immu_trampoline_data
+
+	l.srli  r5,r4,26                // check opcode for write access
+	l.sfeqi r5,0                    // l.j
+	l.bf    0f
+	l.sfeqi r5,0x11                 // l.jr
+	l.bf    1f
+	l.sfeqi r5,1                    // l.jal
+	l.bf    2f
+	l.sfeqi r5,0x12                 // l.jalr
+	l.bf    3f
+	l.sfeqi r5,3                    // l.bnf
+	l.bf    4f
+	l.sfeqi r5,4                    // l.bf
+	l.bf    5f
+99:
+	l.nop
+	l.j	99b			// should never happen
+	l.nop	1
+
+	// r2 is EEA
+	// r3 is trampoline address (physical)
+	// r4 is instruction
+	// r6 is physical(EEA)
+	//
+	// r5
+
+2:	// l.jal
+
+	/* 19 20 aa aa	l.movhi r9,0xaaaa
+	 * a9 29 bb bb  l.ori	r9,0xbbbb
+	 *
+	 * where 0xaaaabbbb is EEA + 0x4 shifted right 2
+	 */
+
+	l.addi	r6,r2,0x4		// this is 0xaaaabbbb
+
+					// l.movhi r9,0xaaaa
+	l.ori	r5,r0,0x1920		// 0x1920 == l.movhi r9
+	l.sh	(TRAMP_SLOT_0+0x0)(r3),r5
+	l.srli	r5,r6,16
+	l.sh	(TRAMP_SLOT_0+0x2)(r3),r5
+
+					// l.ori   r9,0xbbbb
+	l.ori	r5,r0,0xa929		// 0xa929 == l.ori r9
+	l.sh	(TRAMP_SLOT_1+0x0)(r3),r5
+	l.andi	r5,r6,0xffff
+	l.sh	(TRAMP_SLOT_1+0x2)(r3),r5
+
+	/* falthrough, need to set up new jump offset */
+
+
+0:	// l.j
+	l.slli	r6,r4,6			// original offset shifted left 6 - 2
+//	l.srli	r6,r6,6			// original offset shifted right 2
+
+	l.slli	r4,r2,4			// old jump position: EEA shifted left 4
+//	l.srli	r4,r4,6			// old jump position: shifted right 2
+
+	l.addi	r5,r3,0xc		// new jump position (physical)
+	l.slli	r5,r5,4			// new jump position: shifted left 4
+
+	// calculate new jump offset
+	// new_off = old_off + (old_jump - new_jump)
+
+	l.sub	r5,r4,r5		// old_jump - new_jump
+	l.add	r5,r6,r5		// orig_off + (old_jump - new_jump)
+	l.srli	r5,r5,6			// new offset shifted right 2
+
+	// r5 is new jump offset
+					// l.j has opcode 0x0...
+	l.sw	TRAMP_SLOT_2(r3),r5	// write it back
+
+	l.j	trampoline_out
+	l.nop
+
+/* ----------------------------- */
+
+3:	// l.jalr
+
+	/* 19 20 aa aa	l.movhi r9,0xaaaa
+	 * a9 29 bb bb  l.ori	r9,0xbbbb
+	 *
+	 * where 0xaaaabbbb is EEA + 0x4 shifted right 2
+	 */
+
+	l.addi	r6,r2,0x4		// this is 0xaaaabbbb
+
+					// l.movhi r9,0xaaaa
+	l.ori	r5,r0,0x1920		// 0x1920 == l.movhi r9
+	l.sh	(TRAMP_SLOT_0+0x0)(r3),r5
+	l.srli	r5,r6,16
+	l.sh	(TRAMP_SLOT_0+0x2)(r3),r5
+
+					// l.ori   r9,0xbbbb
+	l.ori	r5,r0,0xa929		// 0xa929 == l.ori r9
+	l.sh	(TRAMP_SLOT_1+0x0)(r3),r5
+	l.andi	r5,r6,0xffff
+	l.sh	(TRAMP_SLOT_1+0x2)(r3),r5
+
+	l.lhz	r5,(TRAMP_SLOT_2+0x0)(r3)	// load hi part of jump instruction
+	l.andi	r5,r5,0x3ff		// clear out opcode part
+	l.ori	r5,r5,0x4400		// opcode changed from l.jalr -> l.jr
+	l.sh	(TRAMP_SLOT_2+0x0)(r3),r5 // write it back
+
+	/* falthrough */
+
+1:	// l.jr
+	l.j	trampoline_out
+	l.nop
+
+/* ----------------------------- */
+
+4:	// l.bnf
+5:	// l.bf
+	l.slli	r6,r4,6			// original offset shifted left 6 - 2
+//	l.srli	r6,r6,6			// original offset shifted right 2
+
+	l.slli	r4,r2,4			// old jump position: EEA shifted left 4
+//	l.srli	r4,r4,6			// old jump position: shifted right 2
+
+	l.addi	r5,r3,0xc		// new jump position (physical)
+	l.slli	r5,r5,4			// new jump position: shifted left 4
+
+	// calculate new jump offset
+	// new_off = old_off + (old_jump - new_jump)
+
+	l.add	r6,r6,r4		// (orig_off + old_jump)
+	l.sub	r6,r6,r5		// (orig_off + old_jump) - new_jump
+	l.srli	r6,r6,6			// new offset shifted right 2
+
+	// r6 is new jump offset
+	l.lwz	r4,(TRAMP_SLOT_2+0x0)(r3)	// load jump instruction
+	l.srli	r4,r4,16
+	l.andi	r4,r4,0xfc00		// get opcode part
+	l.slli	r4,r4,16
+	l.or	r6,r4,r6		// l.b(n)f new offset
+	l.sw	TRAMP_SLOT_2(r3),r6	// write it back
+
+	/* we need to add l.j to EEA + 0x8 */
+	tophys	(r4,r2)			// may not be needed (due to shifts down_
+	l.addi	r4,r4,(0x8 - 0x8)	// jump target = r2 + 0x8 (compensate for 0x8)
+					// jump position = r5 + 0x8 (0x8 compensated)
+	l.sub	r4,r4,r5		// jump offset = target - new_position + 0x8
+
+	l.slli	r4,r4,4			// the amount of info in imediate of jump
+	l.srli	r4,r4,6			// jump instruction with offset
+	l.sw	TRAMP_SLOT_4(r3),r4	// write it to 4th slot
+
+	/* fallthrough */
+
+trampoline_out:
+	// set up new EPC to point to our trampoline code
+	LOAD_SYMBOL_2_GPR(r5,_immu_trampoline)
+	l.mtspr	r0,r5,SPR_EPCR_BASE
+
+	// immu_trampoline is (4x) CACHE_LINE aligned
+	// and only 6 instructions long,
+	// so we need to invalidate only 2 lines
+
+	/* Establish cache block size
+	   If BS=0, 16;
+	   If BS=1, 32;
+	   r14 contain block size
+	*/
+	l.mfspr r21,r0,SPR_ICCFGR
+	l.andi	r21,r21,SPR_ICCFGR_CBS
+	l.srli	r21,r21,7
+	l.ori	r23,r0,16
+	l.sll	r14,r23,r21
+
+	l.mtspr	r0,r5,SPR_ICBIR
+	l.add	r5,r5,r14
+	l.mtspr	r0,r5,SPR_ICBIR
+
+	l.jr	r9
+	l.nop
+
+
+/*
+ * DSCR: prints a string referenced by r3.
+ *
+ * PRMS: r3     	- address of the first character of null
+ *			terminated string to be printed
+ *
+ * PREQ: UART at UART_BASE_ADD has to be initialized
+ *
+ * POST: caller should be aware that r3, r9 are changed
+ */
+ENTRY(_emergency_print)
+	EMERGENCY_PRINT_STORE_GPR4
+	EMERGENCY_PRINT_STORE_GPR5
+	EMERGENCY_PRINT_STORE_GPR6
+	EMERGENCY_PRINT_STORE_GPR7
+2:
+	l.lbz	r7,0(r3)
+	l.sfeq	r7,r0
+	l.bf	9f
+	l.nop
+
+// putc:
+	l.movhi r4,hi(UART_BASE_ADD)
+
+	l.addi  r6,r0,0x20
+1:      l.lbz   r5,5(r4)
+	l.andi  r5,r5,0x20
+	l.sfeq  r5,r6
+	l.bnf   1b
+	l.nop
+
+	l.sb    0(r4),r7
+
+	l.addi  r6,r0,0x60
+1:      l.lbz   r5,5(r4)
+	l.andi  r5,r5,0x60
+	l.sfeq  r5,r6
+	l.bnf   1b
+	l.nop
+
+	/* next character */
+	l.j	2b
+	l.addi	r3,r3,0x1
+
+9:
+	EMERGENCY_PRINT_LOAD_GPR7
+	EMERGENCY_PRINT_LOAD_GPR6
+	EMERGENCY_PRINT_LOAD_GPR5
+	EMERGENCY_PRINT_LOAD_GPR4
+	l.jr	r9
+	l.nop
+
+ENTRY(_emergency_print_nr)
+	EMERGENCY_PRINT_STORE_GPR4
+	EMERGENCY_PRINT_STORE_GPR5
+	EMERGENCY_PRINT_STORE_GPR6
+	EMERGENCY_PRINT_STORE_GPR7
+	EMERGENCY_PRINT_STORE_GPR8
+
+	l.addi	r8,r0,32		// shift register
+
+1:	/* remove leading zeros */
+	l.addi	r8,r8,-0x4
+	l.srl	r7,r3,r8
+	l.andi	r7,r7,0xf
+
+	/* don't skip the last zero if number == 0x0 */
+	l.sfeqi	r8,0x4
+	l.bf	2f
+	l.nop
+
+	l.sfeq	r7,r0
+	l.bf	1b
+	l.nop
+
+2:
+	l.srl	r7,r3,r8
+
+	l.andi	r7,r7,0xf
+	l.sflts	r8,r0
+	l.bf	9f
+
+	l.sfgtui r7,0x9
+	l.bnf	8f
+	l.nop
+	l.addi	r7,r7,0x27
+
+8:
+	l.addi	r7,r7,0x30
+// putc:
+	l.movhi r4,hi(UART_BASE_ADD)
+
+	l.addi  r6,r0,0x20
+1:      l.lbz   r5,5(r4)
+	l.andi  r5,r5,0x20
+	l.sfeq  r5,r6
+	l.bnf   1b
+	l.nop
+
+	l.sb    0(r4),r7
+
+	l.addi  r6,r0,0x60
+1:      l.lbz   r5,5(r4)
+	l.andi  r5,r5,0x60
+	l.sfeq  r5,r6
+	l.bnf   1b
+	l.nop
+
+	/* next character */
+	l.j	2b
+	l.addi	r8,r8,-0x4
+
+9:
+	EMERGENCY_PRINT_LOAD_GPR8
+	EMERGENCY_PRINT_LOAD_GPR7
+	EMERGENCY_PRINT_LOAD_GPR6
+	EMERGENCY_PRINT_LOAD_GPR5
+	EMERGENCY_PRINT_LOAD_GPR4
+	l.jr	r9
+	l.nop
+
+
+/*
+ * This should be used for debugging only.
+ * It messes up the Linux early serial output
+ * somehow, so use it sparingly and essentially
+ * only if you need to debug something that goes wrong
+ * before Linux gets the early serial going.
+ *
+ * Furthermore, you'll have to make sure you set the
+ * UART_DEVISOR correctly according to the system
+ * clock rate.
+ *
+ *
+ */
+
+
+
+#define SYS_CLK            20000000
+//#define SYS_CLK            1843200
+#define OR32_CONSOLE_BAUD  115200
+#define UART_DIVISOR       SYS_CLK/(16*OR32_CONSOLE_BAUD)
+
+ENTRY(_early_uart_init)
+	l.movhi	r3,hi(UART_BASE_ADD)
+
+	l.addi	r4,r0,0x7
+	l.sb	0x2(r3),r4
+
+	l.addi	r4,r0,0x0
+	l.sb	0x1(r3),r4
+
+	l.addi	r4,r0,0x3
+	l.sb	0x3(r3),r4
+
+	l.lbz	r5,3(r3)
+	l.ori	r4,r5,0x80
+	l.sb	0x3(r3),r4
+	l.addi	r4,r0,((UART_DIVISOR>>8) & 0x000000ff)
+	l.sb	UART_DLM(r3),r4
+	l.addi  r4,r0,((UART_DIVISOR) & 0x000000ff)
+	l.sb	UART_DLL(r3),r4
+	l.sb	0x3(r3),r5
+
+	l.jr	r9
+	l.nop
+
+_string_copying_linux:
+	.string "\n\n\n\n\n\rCopying Linux... \0"
+
+_string_ok_booting:
+	.string "Ok, booting the kernel.\n\r\0"
+
+_string_unhandled_exception:
+	.string "\n\rRunarunaround: Unhandled exception 0x\0"
+
+_string_epc_prefix:
+	.string ": EPC=0x\0"
+
+_string_nl:
+	.string "\n\r\0"
+
+	.global	_string_esr_irq_bug
+_string_esr_irq_bug:
+	.string "\n\rESR external interrupt bug, for details look into entry.S\n\r\0"
+
+
+
+/* ========================================[ page aligned structures ]=== */
+
+/*
+ * .data section should be page aligned
+ *	(look into arch/or32/kernel/vmlinux.lds)
+ */
+	.section .data,"aw"
+	.align	8192
+	.global  empty_zero_page
+empty_zero_page:
+	.space  8192
+
+	.global  swapper_pg_dir
+swapper_pg_dir:
+	.space  8192
+
+	.global	_unhandled_stack
+_unhandled_stack:
+	.space	8192
+_unhandled_stack_top:
+
+/* ============================================================[ EOF ]=== */