[POWERPC] Convert remaining dts-v0 files to v1

At the moment we have a mixture of left-over version 0 and new-format
version 1 files in arch/powerpc/boot/dts.  This is potentially
confusing to people new to the dts format attempting to figure it out.

So, this patch converts all the as-yet unconverted dts v0 files and
converts them to v1.  They're mechanically-converted, and not hand
tweaked so in some cases they're not 100% in keeping with usual v1
style, but the convertor program does have some heuristics so the
discrepancies aren't too bad.

I have checked that this patch produces no changes to the resulting
dtb binaries.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Acked-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>

1 files changed, 83 insertions, 81 deletions

diff --git a/arch/powerpc/boot/dts/ebony.dts b/arch/powerpc/boot/dts/ebony.dts
index 5079dc890e0..ec2d142291b 100644
--- a/arch/powerpc/boot/dts/ebony.dts
+++ b/arch/powerpc/boot/dts/ebony.dts
@@ -11,12 +11,14 @@
  * any warranty of any kind, whether express or implied.
  */
 
+/dts-v1/;
+
 / {
 	#address-cells = <2>;
 	#size-cells = <1>;
 	model = "ibm,ebony";
 	compatible = "ibm,ebony";
-	dcr-parent = <&/cpus/cpu@0>;
+	dcr-parent = <&{/cpus/cpu@0}>;
 
 	aliases {
 		ethernet0 = &EMAC0;
@@ -32,13 +34,13 @@
 		cpu@0 {
 			device_type = "cpu";
 			model = "PowerPC,440GP";
-			reg = <0>;
+			reg = <0x00000000>;
 			clock-frequency = <0>; // Filled in by zImage
 			timebase-frequency = <0>; // Filled in by zImage
-			i-cache-line-size = <20>;
-			d-cache-line-size = <20>;
-			i-cache-size = <8000>; /* 32 kB */
-			d-cache-size = <8000>; /* 32 kB */
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>; /* 32 kB */
+			d-cache-size = <32768>; /* 32 kB */
 			dcr-controller;
 			dcr-access-method = "native";
 		};
@@ -46,14 +48,14 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0 0 0>; // Filled in by zImage
+		reg = <0x00000000 0x00000000 0x00000000>; // Filled in by zImage
 	};
 
 	UIC0: interrupt-controller0 {
 		compatible = "ibm,uic-440gp", "ibm,uic";
 		interrupt-controller;
 		cell-index = <0>;
-		dcr-reg = <0c0 009>;
+		dcr-reg = <0x0c0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
@@ -64,17 +66,17 @@
 		compatible = "ibm,uic-440gp", "ibm,uic";
 		interrupt-controller;
 		cell-index = <1>;
-		dcr-reg = <0d0 009>;
+		dcr-reg = <0x0d0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
-		interrupts = <1e 4 1f 4>; /* cascade */
+		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
 		interrupt-parent = <&UIC0>;
 	};
 
 	CPC0: cpc {
 		compatible = "ibm,cpc-440gp";
-		dcr-reg = <0b0 003 0e0 010>;
+		dcr-reg = <0x0b0 0x003 0x0e0 0x010>;
 		// FIXME: anything else?
 	};
 
@@ -87,37 +89,37 @@
 
 		SDRAM0: memory-controller {
 			compatible = "ibm,sdram-440gp";
-			dcr-reg = <010 2>;
+			dcr-reg = <0x010 0x002>;
 			// FIXME: anything else?
 		};
 
 		SRAM0: sram {
 			compatible = "ibm,sram-440gp";
-			dcr-reg = <020 8 00a 1>;
+			dcr-reg = <0x020 0x008 0x00a 0x001>;
 		};
 
 		DMA0: dma {
 			// FIXME: ???
 			compatible = "ibm,dma-440gp";
-			dcr-reg = <100 027>;
+			dcr-reg = <0x100 0x027>;
 		};
 
 		MAL0: mcmal {
 			compatible = "ibm,mcmal-440gp", "ibm,mcmal";
-			dcr-reg = <180 62>;
+			dcr-reg = <0x180 0x062>;
 			num-tx-chans = <4>;
 			num-rx-chans = <4>;
 			interrupt-parent = <&MAL0>;
-			interrupts = <0 1 2 3 4>;
+			interrupts = <0x0 0x1 0x2 0x3 0x4>;
 			#interrupt-cells = <1>;
 			#address-cells = <0>;
 			#size-cells = <0>;
-			interrupt-map = </*TXEOB*/ 0 &UIC0 a 4
-					 /*RXEOB*/ 1 &UIC0 b 4
-					 /*SERR*/  2 &UIC1 0 4
-					 /*TXDE*/  3 &UIC1 1 4
-					 /*RXDE*/  4 &UIC1 2 4>;
-			interrupt-map-mask = <ffffffff>;
+			interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4
+					 /*RXEOB*/ 0x1 &UIC0 0xb 0x4
+					 /*SERR*/  0x2 &UIC1 0x0 0x4
+					 /*TXDE*/  0x3 &UIC1 0x1 0x4
+					 /*RXDE*/  0x4 &UIC1 0x2 0x4>;
+			interrupt-map-mask = <0xffffffff>;
 		};
 
 		POB0: opb {
@@ -126,34 +128,34 @@
 			#size-cells = <1>;
 			/* Wish there was a nicer way of specifying a full 32-bit
 			   range */
-			ranges = <00000000 1 00000000 80000000
-				  80000000 1 80000000 80000000>;
-			dcr-reg = <090 00b>;
+			ranges = <0x00000000 0x00000001 0x00000000 0x80000000
+				  0x80000000 0x00000001 0x80000000 0x80000000>;
+			dcr-reg = <0x090 0x00b>;
 			interrupt-parent = <&UIC1>;
-			interrupts = <7 4>;
+			interrupts = <0x7 0x4>;
 			clock-frequency = <0>; // Filled in by zImage
 
 			EBC0: ebc {
 				compatible = "ibm,ebc-440gp", "ibm,ebc";
-				dcr-reg = <012 2>;
+				dcr-reg = <0x012 0x002>;
 				#address-cells = <2>;
 				#size-cells = <1>;
 				clock-frequency = <0>; // Filled in by zImage
 				// ranges property is supplied by zImage
 				// based on firmware's configuration of the
 				// EBC bridge
-				interrupts = <5 4>;
+				interrupts = <0x5 0x4>;
 				interrupt-parent = <&UIC1>;
 
 				small-flash@0,80000 {
 					compatible = "jedec-flash";
 					bank-width = <1>;
-					reg = <0 80000 80000>;
+					reg = <0x00000000 0x00080000 0x00080000>;
 					#address-cells = <1>;
 					#size-cells = <1>;
 					partition@0 {
 						label = "OpenBIOS";
-						reg = <0 80000>;
+						reg = <0x00000000 0x00080000>;
 						read-only;
 					};
 				};
@@ -161,101 +163,101 @@
 				nvram@1,0 {
 					/* NVRAM & RTC */
 					compatible = "ds1743-nvram";
-					#bytes = <2000>;
-					reg = <1 0 2000>;
+					#bytes = <0x2000>;
+					reg = <0x00000001 0x00000000 0x00002000>;
 				};
 
 				large-flash@2,0 {
 					compatible = "jedec-flash";
 					bank-width = <1>;
-					reg = <2 0 400000>;
+					reg = <0x00000002 0x00000000 0x00400000>;
 					#address-cells = <1>;
 					#size-cells = <1>;
 					partition@0 {
 						label = "fs";
-						reg = <0 380000>;
+						reg = <0x00000000 0x00380000>;
 					};
 					partition@380000 {
 						label = "firmware";
-						reg = <380000 80000>;
+						reg = <0x00380000 0x00080000>;
 					};
 				};
 
 				ir@3,0 {
-					reg = <3 0 10>;
+					reg = <0x00000003 0x00000000 0x00000010>;
 				};
 
 				fpga@7,0 {
 					compatible = "Ebony-FPGA";
-					reg = <7 0 10>;
-					virtual-reg = <e8300000>;
+					reg = <0x00000007 0x00000000 0x00000010>;
+					virtual-reg = <0xe8300000>;
 				};
 			};
 
 			UART0: serial@40000200 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <40000200 8>;
-				virtual-reg = <e0000200>;
-				clock-frequency = <A8C000>;
-				current-speed = <2580>;
+				reg = <0x40000200 0x00000008>;
+				virtual-reg = <0xe0000200>;
+				clock-frequency = <11059200>;
+				current-speed = <9600>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <0 4>;
+				interrupts = <0x0 0x4>;
 			};
 
 			UART1: serial@40000300 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <40000300 8>;
-				virtual-reg = <e0000300>;
-				clock-frequency = <A8C000>;
-				current-speed = <2580>;
+				reg = <0x40000300 0x00000008>;
+				virtual-reg = <0xe0000300>;
+				clock-frequency = <11059200>;
+				current-speed = <9600>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <1 4>;
+				interrupts = <0x1 0x4>;
 			};
 
 			IIC0: i2c@40000400 {
 				/* FIXME */
 				compatible = "ibm,iic-440gp", "ibm,iic";
-				reg = <40000400 14>;
+				reg = <0x40000400 0x00000014>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <2 4>;
+				interrupts = <0x2 0x4>;
 			};
 			IIC1: i2c@40000500 {
 				/* FIXME */
 				compatible = "ibm,iic-440gp", "ibm,iic";
-				reg = <40000500 14>;
+				reg = <0x40000500 0x00000014>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <3 4>;
+				interrupts = <0x3 0x4>;
 			};
 
 			GPIO0: gpio@40000700 {
 				/* FIXME */
 				compatible = "ibm,gpio-440gp";
-				reg = <40000700 20>;
+				reg = <0x40000700 0x00000020>;
 			};
 
 			ZMII0: emac-zmii@40000780 {
 				compatible = "ibm,zmii-440gp", "ibm,zmii";
-				reg = <40000780 c>;
+				reg = <0x40000780 0x0000000c>;
 			};
 
 			EMAC0: ethernet@40000800 {
 				device_type = "network";
 				compatible = "ibm,emac-440gp", "ibm,emac";
 				interrupt-parent = <&UIC1>;
-				interrupts = <1c 4 1d 4>;
-				reg = <40000800 70>;
+				interrupts = <0x1c 0x4 0x1d 0x4>;
+				reg = <0x40000800 0x00000070>;
 				local-mac-address = [000000000000]; // Filled in by zImage
 				mal-device = <&MAL0>;
 				mal-tx-channel = <0 1>;
 				mal-rx-channel = <0>;
 				cell-index = <0>;
-				max-frame-size = <5dc>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <1500>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rmii";
-				phy-map = <00000001>;
+				phy-map = <0x00000001>;
 				zmii-device = <&ZMII0>;
 				zmii-channel = <0>;
 			};
@@ -263,18 +265,18 @@
 				device_type = "network";
 				compatible = "ibm,emac-440gp", "ibm,emac";
 				interrupt-parent = <&UIC1>;
-				interrupts = <1e 4 1f 4>;
-				reg = <40000900 70>;
+				interrupts = <0x1e 0x4 0x1f 0x4>;
+				reg = <0x40000900 0x00000070>;
 				local-mac-address = [000000000000]; // Filled in by zImage
 				mal-device = <&MAL0>;
 				mal-tx-channel = <2 3>;
 				mal-rx-channel = <1>;
 				cell-index = <1>;
-				max-frame-size = <5dc>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <1500>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rmii";
-				phy-map = <00000001>;
+				phy-map = <0x00000001>;
 				zmii-device = <&ZMII0>;
 				zmii-channel = <1>;
 			};
@@ -282,9 +284,9 @@
 
 			GPT0: gpt@40000a00 {
 				/* FIXME */
-				reg = <40000a00 d4>;
+				reg = <0x40000a00 0x000000d4>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <12 4 13 4 14 4 15 4 16 4>;
+				interrupts = <0x12 0x4 0x13 0x4 0x14 0x4 0x15 0x4 0x16 0x4>;
 			};
 
 		};
@@ -296,35 +298,35 @@
 			#address-cells = <3>;
 			compatible = "ibm,plb440gp-pcix", "ibm,plb-pcix";
 			primary;
-			reg = <2 0ec00000 8	/* Config space access */
-			       0 0 0		/* no IACK cycles */
-			       2 0ed00000 4     /* Special cycles */
-			       2 0ec80000 f0	/* Internal registers */
-			       2 0ec80100 fc>;	/* Internal messaging registers */
+			reg = <0x00000002 0x0ec00000 0x00000008	/* Config space access */
+			       0x00000000 0x00000000 0x00000000		/* no IACK cycles */
+			       0x00000002 0x0ed00000 0x00000004     /* Special cycles */
+			       0x00000002 0x0ec80000 0x000000f0	/* Internal registers */
+			       0x00000002 0x0ec80100 0x000000fc>;	/* Internal messaging registers */
 
 			/* Outbound ranges, one memory and one IO,
 			 * later cannot be changed
 			 */
-			ranges = <02000000 0 80000000 00000003 80000000 0 80000000
-				  01000000 0 00000000 00000002 08000000 0 00010000>;
+			ranges = <0x02000000 0x00000000 0x80000000 0x00000003 0x80000000 0x00000000 0x80000000
+				  0x01000000 0x00000000 0x00000000 0x00000002 0x08000000 0x00000000 0x00010000>;
 
 			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <42000000 0 0 0 0 0 80000000>;
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
 
 			/* Ebony has all 4 IRQ pins tied together per slot */
-			interrupt-map-mask = <f800 0 0 0>;
+			interrupt-map-mask = <0xf800 0x0 0x0 0x0>;
 			interrupt-map = <
 				/* IDSEL 1 */
-				0800 0 0 0 &UIC0 17 8
+				0x800 0x0 0x0 0x0 &UIC0 0x17 0x8
 
 				/* IDSEL 2 */
-				1000 0 0 0 &UIC0 18 8
+				0x1000 0x0 0x0 0x0 &UIC0 0x18 0x8
 
 				/* IDSEL 3 */
-				1800 0 0 0 &UIC0 19 8
+				0x1800 0x0 0x0 0x0 &UIC0 0x19 0x8
 
 				/* IDSEL 4 */
-				2000 0 0 0 &UIC0 1a 8
+				0x2000 0x0 0x0 0x0 &UIC0 0x1a 0x8
 			>;
 		};
 	};