Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc

Pull powerpc merge from Benjamin Herrenschmidt:
 "Here's the powerpc batch for this merge window.  It is going to be a
  bit more nasty than usual as in touching things outside of
  arch/powerpc mostly due to the big iSeriesectomy :-) We finally got
  rid of the bugger (legacy iSeries support) which was a PITA to
  maintain and that nobody really used anymore.

  Here are some of the highlights:

   - Legacy iSeries is gone.  Thanks Stephen ! There's still some bits
     and pieces remaining if you do a grep -ir series arch/powerpc but
     they are harmless and will be removed in the next few weeks
     hopefully.

   - The 'fadump' functionality (Firmware Assisted Dump) replaces the
     previous (equivalent) "pHyp assisted dump"...  it's a rewrite of a
     mechanism to get the hypervisor to do crash dumps on pSeries, the
     new implementation hopefully being much more reliable.  Thanks
     Mahesh Salgaonkar.

   - The "EEH" code (pSeries PCI error handling & recovery) got a big
     spring cleaning, motivated by the need to be able to implement a
     new backend for it on top of some new different type of firwmare.

     The work isn't complete yet, but a good chunk of the cleanups is
     there.  Note that this adds a field to struct device_node which is
     not very nice and which Grant objects to.  I will have a patch soon
     that moves that to a powerpc private data structure (hopefully
     before rc1) and we'll improve things further later on (hopefully
     getting rid of the need for that pointer completely).  Thanks Gavin
     Shan.

   - I dug into our exception & interrupt handling code to improve the
     way we do lazy interrupt handling (and make it work properly with
     "edge" triggered interrupt sources), and while at it found & fixed
     a wagon of issues in those areas, including adding support for page
     fault retry & fatal signals on page faults.

   - Your usual random batch of small fixes & updates, including a bunch
     of new embedded boards, both Freescale and APM based ones, etc..."

I fixed up some conflicts with the generalized irq-domain changes from
Grant Likely, hopefully correctly.

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (141 commits)
  powerpc/ps3: Do not adjust the wrapper load address
  powerpc: Remove the rest of the legacy iSeries include files
  powerpc: Remove the remaining CONFIG_PPC_ISERIES pieces
  init: Remove CONFIG_PPC_ISERIES
  powerpc: Remove FW_FEATURE ISERIES from arch code
  tty/hvc_vio: FW_FEATURE_ISERIES is no longer selectable
  powerpc/spufs: Fix double unlocks
  powerpc/5200: convert mpc5200 to use of_platform_populate()
  powerpc/mpc5200: add options to mpc5200_defconfig
  powerpc/mpc52xx: add a4m072 board support
  powerpc/mpc5200: update mpc5200_defconfig to fit for charon board
  Documentation/powerpc/mpc52xx.txt: Checkpatch cleanup
  powerpc/44x: Add additional device support for APM821xx SoC and Bluestone board
  powerpc/44x: Add support PCI-E for APM821xx SoC and Bluestone board
  MAINTAINERS: Update PowerPC 4xx tree
  powerpc/44x: The bug fixed support for APM821xx SoC and Bluestone board
  powerpc: document the FSL MPIC message register binding
  powerpc: add support for MPIC message register API
  powerpc/fsl: Added aliased MSIIR register address to MSI node in dts
  powerpc/85xx: mpc8548cds - add 36-bit dts
  ...

20 files changed, 85 insertions, 16 deletions

diff --git a/arch/powerpc/boot/dts/fsl/mpc8536si-post.dtsi b/arch/powerpc/boot/dts/fsl/mpc8536si-post.dtsi
index b37da56018b..c8b2daa40ac 100644
--- a/arch/powerpc/boot/dts/fsl/mpc8536si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/mpc8536si-post.dtsi
@@ -202,7 +202,7 @@
 /include/ "pq3-etsec1-timer-0.dtsi"
 
 	usb@22000 {
-		compatible = "fsl,mpc8536-usb2-mph", "fsl-usb2-mph";
+		compatible = "fsl-usb2-mph-v1.2", "fsl,mpc8536-usb2-mph", "fsl-usb2-mph";
 		reg = <0x22000 0x1000>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -210,7 +210,7 @@
 	};
 
 	usb@23000 {
-		compatible = "fsl,mpc8536-usb2-mph", "fsl-usb2-mph";
+		compatible = "fsl-usb2-mph-v1.2", "fsl,mpc8536-usb2-mph", "fsl-usb2-mph";
 		reg = <0x23000 0x1000>;
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git a/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi b/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi
index 9d8023a69d7..579d76cb8e3 100644
--- a/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi
@@ -89,6 +89,21 @@
 	};
 };
 
+&rio {
+	compatible = "fsl,srio";
+	interrupts = <48 2 0 0>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+	fsl,srio-rmu-handle = <&rmu>;
+	ranges;
+
+	port1 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		cell-index = <1>;
+	};
+};
+
 &soc {
 	#address-cells = <1>;
 	#size-cells = <1>;
@@ -134,6 +149,7 @@
 
 /include/ "pq3-sec2.1-0.dtsi"
 /include/ "pq3-mpic.dtsi"
+/include/ "pq3-rmu-0.dtsi"
 
 	global-utilities@e0000 {
 		compatible = "fsl,mpc8548-guts";
diff --git a/arch/powerpc/boot/dts/fsl/mpc8548si-pre.dtsi b/arch/powerpc/boot/dts/fsl/mpc8548si-pre.dtsi
index 289f1218d75..720422d8352 100644
--- a/arch/powerpc/boot/dts/fsl/mpc8548si-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/mpc8548si-pre.dtsi
@@ -43,7 +43,9 @@
 		serial0 = &serial0;
 		serial1 = &serial1;
 		ethernet0 = &enet0;
-		ethernet1 = &enet2;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
 		pci0 = &pci0;
 		pci1 = &pci1;
 		pci2 = &pci2;
diff --git a/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi
index a97d1263372..0bde9ee8afa 100644
--- a/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi
@@ -156,6 +156,9 @@
 
 /include/ "pq3-dma-0.dtsi"
 /include/ "pq3-usb2-dr-0.dtsi"
+	usb@22000 {
+		compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr";
+	};
 /include/ "pq3-esdhc-0.dtsi"
 	sdhc@2e000 {
 		compatible = "fsl,p1010-esdhc", "fsl,esdhc";
diff --git a/arch/powerpc/boot/dts/fsl/p1020si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1020si-post.dtsi
index 5de5fc35131..68cc5e7f647 100644
--- a/arch/powerpc/boot/dts/fsl/p1020si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p1020si-post.dtsi
@@ -142,7 +142,13 @@
 
 /include/ "pq3-dma-0.dtsi"
 /include/ "pq3-usb2-dr-0.dtsi"
+	usb@22000 {
+		compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr";
+	};
 /include/ "pq3-usb2-dr-1.dtsi"
+	usb@23000 {
+		compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr";
+	};
 
 /include/ "pq3-esdhc-0.dtsi"
 	sdhc@2e000 {
diff --git a/arch/powerpc/boot/dts/fsl/p1021si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1021si-post.dtsi
index 38ba54d1e32..4252ef85fb7 100644
--- a/arch/powerpc/boot/dts/fsl/p1021si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p1021si-post.dtsi
@@ -142,8 +142,15 @@
 
 /include/ "pq3-dma-0.dtsi"
 /include/ "pq3-usb2-dr-0.dtsi"
+	usb@22000 {
+		compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr";
+	};
 
 /include/ "pq3-esdhc-0.dtsi"
+	sdhc@2e000 {
+		sdhci,auto-cmd12;
+	};
+
 /include/ "pq3-sec3.3-0.dtsi"
 
 /include/ "pq3-mpic.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/p1022si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1022si-post.dtsi
index ff9ed1d8792..06216b8c0af 100644
--- a/arch/powerpc/boot/dts/fsl/p1022si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p1022si-post.dtsi
@@ -35,7 +35,11 @@
 &lbc {
 	#address-cells = <2>;
 	#size-cells = <1>;
-	compatible = "fsl,p1022-elbc", "fsl,elbc", "simple-bus";
+	/*
+	 * The localbus on the P1022 is not a simple-bus because of the eLBC
+	 * pin muxing when the DIU is enabled.
+	 */
+	compatible = "fsl,p1022-elbc", "fsl,elbc";
 	interrupts = <19 2 0 0>;
 };
 
@@ -199,7 +203,13 @@
 
 /include/ "pq3-dma-0.dtsi"
 /include/ "pq3-usb2-dr-0.dtsi"
+	usb@22000 {
+		compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr";
+	};
 /include/ "pq3-usb2-dr-1.dtsi"
+	usb@23000 {
+		compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr";
+	};
 
 /include/ "pq3-esdhc-0.dtsi"
 	sdhc@2e000 {
diff --git a/arch/powerpc/boot/dts/fsl/p1023si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1023si-post.dtsi
index b06bb4cc1fe..941fa159cef 100644
--- a/arch/powerpc/boot/dts/fsl/p1023si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p1023si-post.dtsi
@@ -142,6 +142,9 @@
 
 /include/ "pq3-dma-0.dtsi"
 /include/ "pq3-usb2-dr-0.dtsi"
+	usb@22000 {
+		compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr";
+	};
 
 	crypto: crypto@300000 {
 		compatible = "fsl,sec-v4.2", "fsl,sec-v4.0";
diff --git a/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi b/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi
index 332e9e75e6c..884e01bcb24 100644
--- a/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi
@@ -171,6 +171,9 @@
 
 /include/ "pq3-dma-0.dtsi"
 /include/ "pq3-usb2-dr-0.dtsi"
+	usb@22000 {
+		compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr";
+	};
 /include/ "pq3-etsec1-0.dtsi"
 /include/ "pq3-etsec1-timer-0.dtsi"
 
diff --git a/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi b/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi
index 234a399ddeb..531eab82c6c 100644
--- a/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi
@@ -309,12 +309,14 @@
 /include/ "qoriq-gpio-0.dtsi"
 /include/ "qoriq-usb2-mph-0.dtsi"
 		usb0: usb@210000 {
+			compatible = "fsl-usb2-mph-v1.6", "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
 			phy_type = "utmi";
 			port0;
 		};
 
 /include/ "qoriq-usb2-dr-0.dtsi"
 		usb1: usb@211000 {
+			compatible = "fsl-usb2-dr-v1.6", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
 			dr_mode = "host";
 			phy_type = "utmi";
 		};
diff --git a/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi b/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi
index d41d08de7f7..af4ebc8009e 100644
--- a/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi
@@ -336,12 +336,14 @@
 /include/ "qoriq-gpio-0.dtsi"
 /include/ "qoriq-usb2-mph-0.dtsi"
 		usb0: usb@210000 {
+			compatible = "fsl-usb2-mph-v1.6", "fsl-usb2-mph";
 			phy_type = "utmi";
 			port0;
 		};
 
 /include/ "qoriq-usb2-dr-0.dtsi"
 		usb1: usb@211000 {
+			compatible = "fsl-usb2-dr-v1.6", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
 			dr_mode = "host";
 			phy_type = "utmi";
 		};
diff --git a/arch/powerpc/boot/dts/fsl/p3060si-post.dtsi b/arch/powerpc/boot/dts/fsl/p3060si-post.dtsi
index a63edd195ae..b3e56929eee 100644
--- a/arch/powerpc/boot/dts/fsl/p3060si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p3060si-post.dtsi
@@ -291,6 +291,12 @@
 /include/ "qoriq-duart-1.dtsi"
 /include/ "qoriq-gpio-0.dtsi"
 /include/ "qoriq-usb2-mph-0.dtsi"
+	usb@210000 {
+		compatible = "fsl-usb2-mph-v2.2", "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
+	};
 /include/ "qoriq-usb2-dr-0.dtsi"
+	usb@211000 {
+		compatible = "fsl-usb2-dr-v2.2", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
+	};
 /include/ "qoriq-sec4.1-0.dtsi"
 };
diff --git a/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi b/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi
index 914074b91a8..64b6abea846 100644
--- a/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi
@@ -339,12 +339,14 @@
 /include/ "qoriq-gpio-0.dtsi"
 /include/ "qoriq-usb2-mph-0.dtsi"
 		usb0: usb@210000 {
+			compatible = "fsl-usb2-mph-v1.6", "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
 			phy_type = "utmi";
 			port0;
 		};
 
 /include/ "qoriq-usb2-dr-0.dtsi"
 		usb1: usb@211000 {
+			compatible = "fsl-usb2-dr-v1.6", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
 			dr_mode = "host";
 			phy_type = "utmi";
 		};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec1-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec1-0.dtsi
index a1979ae334a..3b0650a9847 100644
--- a/arch/powerpc/boot/dts/fsl/pq3-etsec1-0.dtsi
+++ b/arch/powerpc/boot/dts/fsl/pq3-etsec1-0.dtsi
@@ -1,7 +1,7 @@
 /*
  * PQ3 eTSEC device tree stub [ @ offsets 0x24000 ]
  *
- * Copyright 2011 Freescale Semiconductor Inc.
+ * Copyright 2011-2012 Freescale Semiconductor Inc.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
@@ -41,6 +41,7 @@ ethernet@24000 {
 	compatible = "gianfar";
 	reg = <0x24000 0x1000>;
 	ranges = <0x0 0x24000 0x1000>;
+	fsl,magic-packet;
 	local-mac-address = [ 00 00 00 00 00 00 ];
 	interrupts = <29 2 0 0 30 2 0 0 34 2 0 0>;
 };
diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec1-1.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec1-1.dtsi
index 4c4fdde1ec2..96693b41f0f 100644
--- a/arch/powerpc/boot/dts/fsl/pq3-etsec1-1.dtsi
+++ b/arch/powerpc/boot/dts/fsl/pq3-etsec1-1.dtsi
@@ -1,7 +1,7 @@
 /*
  * PQ3 eTSEC device tree stub [ @ offsets 0x25000 ]
  *
- * Copyright 2011 Freescale Semiconductor Inc.
+ * Copyright 2011-2012 Freescale Semiconductor Inc.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
@@ -41,6 +41,7 @@ ethernet@25000 {
 	compatible = "gianfar";
 	reg = <0x25000 0x1000>;
 	ranges = <0x0 0x25000 0x1000>;
+	fsl,magic-packet;
 	local-mac-address = [ 00 00 00 00 00 00 ];
 	interrupts = <35 2 0 0 36 2 0 0 40 2 0 0>;
 };
diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec1-2.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec1-2.dtsi
index 4b8ab438668..6b3fab19da1 100644
--- a/arch/powerpc/boot/dts/fsl/pq3-etsec1-2.dtsi
+++ b/arch/powerpc/boot/dts/fsl/pq3-etsec1-2.dtsi
@@ -1,7 +1,7 @@
 /*
  * PQ3 eTSEC device tree stub [ @ offsets 0x26000 ]
  *
- * Copyright 2011 Freescale Semiconductor Inc.
+ * Copyright 2011-2012 Freescale Semiconductor Inc.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
@@ -41,6 +41,7 @@ ethernet@26000 {
 	compatible = "gianfar";
 	reg = <0x26000 0x1000>;
 	ranges = <0x0 0x26000 0x1000>;
+	fsl,magic-packet;
 	local-mac-address = [ 00 00 00 00 00 00 ];
 	interrupts = <31 2 0 0 32 2 0 0 33 2 0 0>;
 };
diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec1-3.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec1-3.dtsi
index 40c9137729a..0da592d93dd 100644
--- a/arch/powerpc/boot/dts/fsl/pq3-etsec1-3.dtsi
+++ b/arch/powerpc/boot/dts/fsl/pq3-etsec1-3.dtsi
@@ -1,7 +1,7 @@
 /*
  * PQ3 eTSEC device tree stub [ @ offsets 0x27000 ]
  *
- * Copyright 2011 Freescale Semiconductor Inc.
+ * Copyright 2011-2012 Freescale Semiconductor Inc.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
@@ -41,6 +41,7 @@ ethernet@27000 {
 	compatible = "gianfar";
 	reg = <0x27000 0x1000>;
 	ranges = <0x0 0x27000 0x1000>;
+	fsl,magic-packet;
 	local-mac-address = [ 00 00 00 00 00 00 ];
 	interrupts = <37 2 0 0 38 2 0 0 39 2 0 0>;
 };
diff --git a/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi b/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi
index 5c804606584..fdedf7b1fe0 100644
--- a/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi
+++ b/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi
@@ -39,6 +39,9 @@ mpic: pic@40000 {
 	reg = <0x40000 0x40000>;
 	compatible = "fsl,mpic";
 	device_type = "open-pic";
+	big-endian;
+	single-cpu-affinity;
+	last-interrupt-source = <255>;
 };
 
 timer@41100 {
diff --git a/arch/powerpc/boot/dts/fsl/pq3-sec4.4-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-sec4.4-0.dtsi
index bf957a7fca2..d4c9d5daab2 100644
--- a/arch/powerpc/boot/dts/fsl/pq3-sec4.4-0.dtsi
+++ b/arch/powerpc/boot/dts/fsl/pq3-sec4.4-0.dtsi
@@ -33,32 +33,32 @@
  */
 
 crypto@30000 {
-	compatible = "fsl,sec4.4", "fsl,sec4.0";
+	compatible = "fsl,sec-v4.4", "fsl,sec-v4.0";
 	#address-cells = <1>;
 	#size-cells = <1>;
 	reg		 = <0x30000 0x10000>;
 	interrupts	 = <58 2 0 0>;
 
 	sec_jr0: jr@1000 {
-		compatible = "fsl,sec4.4-job-ring", "fsl,sec4.0-job-ring";
+		compatible = "fsl,sec-v4.4-job-ring", "fsl,sec-v4.0-job-ring";
 		reg	   = <0x1000 0x1000>;
 		interrupts	 = <45 2 0 0>;
 	};
 
 	sec_jr1: jr@2000 {
-		compatible = "fsl,sec4.4-job-ring", "fsl,sec4.0-job-ring";
+		compatible = "fsl,sec-v4.4-job-ring", "fsl,sec-v4.0-job-ring";
 		reg	   = <0x2000 0x1000>;
 		interrupts	 = <45 2 0 0>;
 	};
 
 	sec_jr2: jr@3000 {
-		compatible = "fsl,sec4.4-job-ring", "fsl,sec4.0-job-ring";
+		compatible = "fsl,sec-v4.4-job-ring", "fsl,sec-v4.0-job-ring";
 		reg	   = <0x3000 0x1000>;
 		interrupts	 = <45 2 0 0>;
 	};
 
 	sec_jr3: jr@4000 {
-		compatible = "fsl,sec4.4-job-ring", "fsl,sec4.0-job-ring";
+		compatible = "fsl,sec-v4.4-job-ring", "fsl,sec-v4.0-job-ring";
 		reg	   = <0x4000 0x1000>;
 		interrupts	 = <45 2 0 0>;
 	};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-mpic.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-mpic.dtsi
index b9bada6a87d..08f42271f86 100644
--- a/arch/powerpc/boot/dts/fsl/qoriq-mpic.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-mpic.dtsi
@@ -53,7 +53,7 @@ timer@41100 {
 
 msi0: msi@41600 {
 	compatible = "fsl,mpic-msi";
-	reg = <0x41600 0x200>;
+	reg = <0x41600 0x200 0x44140 4>;
 	msi-available-ranges = <0 0x100>;
 	interrupts = <
 		0xe0 0 0 0
@@ -68,7 +68,7 @@ msi0: msi@41600 {
 
 msi1: msi@41800 {
 	compatible = "fsl,mpic-msi";
-	reg = <0x41800 0x200>;
+	reg = <0x41800 0x200 0x45140 4>;
 	msi-available-ranges = <0 0x100>;
 	interrupts = <
 		0xe8 0 0 0
@@ -83,7 +83,7 @@ msi1: msi@41800 {
 
 msi2: msi@41a00 {
 	compatible = "fsl,mpic-msi";
-	reg = <0x41a00 0x200>;
+	reg = <0x41a00 0x200 0x46140 4>;
 	msi-available-ranges = <0 0x100>;
 	interrupts = <
 		0xf0 0 0 0