diff options
| author | Anton Vorontsov <avorontsov@ru.mvista.com> | 2009-03-19 21:01:51 +0300 |
|---|---|---|
| committer | Kumar Gala <galak@kernel.crashing.org> | 2009-03-24 08:35:18 -0500 |
| commit | d8bc55fb334e1124b72684e2d0a2e599aab21ae4 (patch) | |
| tree | 5290a33768186b65e8f1bf37a39ff645b4e4af2b /arch/powerpc/boot/dts/gef_ppc9a.dts | |
| parent | 84ba4a5899e613a396c5bea5feadba923534801b (diff) | |
powerpc/86xx: Move gianfar mdio nodes under the ethernet nodes
Currently it doesn't matter where the mdio nodes are placed, but with
power management support (i.e. when sleep = <> properties will take
effect), mdio nodes placement will become important: mdio controller
is a part of the ethernet block, so the mdio nodes should be placed
correctly. Otherwise we may wrongly assume that MDIO controllers are
available during sleep.
Suggested-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Diffstat (limited to 'arch/powerpc/boot/dts/gef_ppc9a.dts')
| -rw-r--r-- | arch/powerpc/boot/dts/gef_ppc9a.dts | 39 |
1 files changed, 21 insertions, 18 deletions
diff --git a/arch/powerpc/boot/dts/gef_ppc9a.dts b/arch/powerpc/boot/dts/gef_ppc9a.dts index 0ddfdfc7ab5..d47ad071875 100644 --- a/arch/powerpc/boot/dts/gef_ppc9a.dts +++ b/arch/powerpc/boot/dts/gef_ppc9a.dts @@ -247,34 +247,37 @@ }; }; - mdio@24520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-mdio"; - reg = <0x24520 0x20>; - - phy0: ethernet-phy@0 { - interrupt-parent = <&gef_pic>; - interrupts = <0x9 0x4>; - reg = <1>; - }; - phy2: ethernet-phy@2 { - interrupt-parent = <&gef_pic>; - interrupts = <0x8 0x4>; - reg = <3>; - }; - }; - enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; device_type = "network"; model = "eTSEC"; compatible = "gianfar"; reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>; interrupt-parent = <&mpic>; phy-handle = <&phy0>; phy-connection-type = "gmii"; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy0: ethernet-phy@0 { + interrupt-parent = <&gef_pic>; + interrupts = <0x9 0x4>; + reg = <1>; + }; + phy2: ethernet-phy@2 { + interrupt-parent = <&gef_pic>; + interrupts = <0x8 0x4>; + reg = <3>; + }; + }; }; enet1: ethernet@26000 { |