[POWERPC] 83xx: Updated and renamed MPC834x SYS to MPC834x MDS

The MPC834x SYS board has always been called the MPC834x MDS since its public
release.  Removed all references to SYS and replaced with MDS.  Additionally
renamed the .dts to match the defconfig (mpc834x_mds*).

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

1 files changed, 334 insertions, 0 deletions

diff --git a/arch/powerpc/boot/dts/mpc834x_mds.dts b/arch/powerpc/boot/dts/mpc834x_mds.dts
new file mode 100644
index 00000000000..dc121b3cb4a
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc834x_mds.dts
@@ -0,0 +1,334 @@
+/*
+ * MPC8349E MDS Device Tree Source
+ *
+ * Copyright 2005, 2006 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/ {
+	model = "MPC8349EMDS";
+	compatible = "MPC834xMDS";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#cpus = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8349@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <20>;	// 32 bytes
+			i-cache-line-size = <20>;	// 32 bytes
+			d-cache-size = <8000>;		// L1, 32K
+			i-cache-size = <8000>;		// L1, 32K
+			timebase-frequency = <0>;	// from bootloader
+			bus-frequency = <0>;		// from bootloader
+			clock-frequency = <0>;		// from bootloader
+			32-bit;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <00000000 10000000>;	// 256MB at 0
+	};
+
+	bcsr@e2400000 {
+		device_type = "board-control";
+		reg = <e2400000 8000>;
+	};
+
+	soc8349@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		#interrupt-cells = <2>;
+		device_type = "soc";
+		ranges = <0 e0000000 00100000>;
+		reg = <e0000000 00000200>;
+		bus-frequency = <0>;
+
+		wdt@200 {
+			device_type = "watchdog";
+			compatible = "mpc83xx_wdt";
+			reg = <200 100>;
+		};
+
+		i2c@3000 {
+			device_type = "i2c";
+			compatible = "fsl-i2c";
+			reg = <3000 100>;
+			interrupts = <e 8>;
+			interrupt-parent = <700>;
+			dfsrr;
+		};
+
+		i2c@3100 {
+			device_type = "i2c";
+			compatible = "fsl-i2c";
+			reg = <3100 100>;
+			interrupts = <f 8>;
+			interrupt-parent = <700>;
+			dfsrr;
+		};
+
+		spi@7000 {
+			device_type = "spi";
+			compatible = "mpc83xx_spi";
+			reg = <7000 1000>;
+			interrupts = <10 8>;
+			interrupt-parent = <700>;
+			mode = <0>;
+		};
+
+		/* phy type (ULPI or SERIAL) are only types supportted for MPH */
+		/* port = 0 or 1 */
+		usb@22000 {
+			device_type = "usb";
+			compatible = "fsl-usb2-mph";
+			reg = <22000 1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupt-parent = <700>;
+			interrupts = <27 2>;
+			phy_type = "ulpi";
+			port1;
+		};
+		/* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
+		usb@23000 {
+			device_type = "usb";
+			compatible = "fsl-usb2-dr";
+			reg = <23000 1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupt-parent = <700>;
+			interrupts = <26 2>;
+			dr_mode = "otg";
+			phy_type = "ulpi";
+		};
+
+		mdio@24520 {
+			device_type = "mdio";
+			compatible = "gianfar";
+			reg = <24520 20>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			linux,phandle = <24520>;
+			ethernet-phy@0 {
+				linux,phandle = <2452000>;
+				interrupt-parent = <700>;
+				interrupts = <11 2>;
+				reg = <0>;
+				device_type = "ethernet-phy";
+			};
+			ethernet-phy@1 {
+				linux,phandle = <2452001>;
+				interrupt-parent = <700>;
+				interrupts = <12 2>;
+				reg = <1>;
+				device_type = "ethernet-phy";
+			};
+		};
+
+		ethernet@24000 {
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <24000 1000>;
+			address = [ 00 00 00 00 00 00 ];
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <20 8 21 8 22 8>;
+			interrupt-parent = <700>;
+			phy-handle = <2452000>;
+		};
+
+		ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <25000 1000>;
+			address = [ 00 00 00 00 00 00 ];
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <23 8 24 8 25 8>;
+			interrupt-parent = <700>;
+			phy-handle = <2452001>;
+		};
+
+		serial@4500 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <4500 100>;
+			clock-frequency = <0>;
+			interrupts = <9 8>;
+			interrupt-parent = <700>;
+		};
+
+		serial@4600 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <4600 100>;
+			clock-frequency = <0>;
+			interrupts = <a 8>;
+			interrupt-parent = <700>;
+		};
+
+		pci@8500 {
+			interrupt-map-mask = <f800 0 0 7>;
+			interrupt-map = <
+
+					/* IDSEL 0x11 */
+					 8800 0 0 1 700 14 8
+					 8800 0 0 2 700 15 8
+					 8800 0 0 3 700 16 8
+					 8800 0 0 4 700 17 8
+
+					/* IDSEL 0x12 */
+					 9000 0 0 1 700 16 8
+					 9000 0 0 2 700 17 8
+					 9000 0 0 3 700 14 8
+					 9000 0 0 4 700 15 8
+
+					/* IDSEL 0x13 */
+					 9800 0 0 1 700 17 8
+					 9800 0 0 2 700 14 8
+					 9800 0 0 3 700 15 8
+					 9800 0 0 4 700 16 8
+
+					/* IDSEL 0x15 */
+					 a800 0 0 1 700 14 8
+					 a800 0 0 2 700 15 8
+					 a800 0 0 3 700 16 8
+					 a800 0 0 4 700 17 8
+
+					/* IDSEL 0x16 */
+					 b000 0 0 1 700 17 8
+					 b000 0 0 2 700 14 8
+					 b000 0 0 3 700 15 8
+					 b000 0 0 4 700 16 8
+
+					/* IDSEL 0x17 */
+					 b800 0 0 1 700 16 8
+					 b800 0 0 2 700 17 8
+					 b800 0 0 3 700 14 8
+					 b800 0 0 4 700 15 8
+
+					/* IDSEL 0x18 */
+					 c000 0 0 1 700 15 8
+					 c000 0 0 2 700 16 8
+					 c000 0 0 3 700 17 8
+					 c000 0 0 4 700 14 8>;
+			interrupt-parent = <700>;
+			interrupts = <42 8>;
+			bus-range = <0 0>;
+			ranges = <02000000 0 a0000000 a0000000 0 10000000
+				  42000000 0 80000000 80000000 0 10000000
+				  01000000 0 00000000 e2000000 0 00100000>;
+			clock-frequency = <3f940aa>;
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			reg = <8500 100>;
+			compatible = "83xx";
+			device_type = "pci";
+		};
+
+		pci@8600 {
+			interrupt-map-mask = <f800 0 0 7>;
+			interrupt-map = <
+
+					/* IDSEL 0x11 */
+					 8800 0 0 1 700 14 8
+					 8800 0 0 2 700 15 8
+					 8800 0 0 3 700 16 8
+					 8800 0 0 4 700 17 8
+
+					/* IDSEL 0x12 */
+					 9000 0 0 1 700 16 8
+					 9000 0 0 2 700 17 8
+					 9000 0 0 3 700 14 8
+					 9000 0 0 4 700 15 8
+
+					/* IDSEL 0x13 */
+					 9800 0 0 1 700 17 8
+					 9800 0 0 2 700 14 8
+					 9800 0 0 3 700 15 8
+					 9800 0 0 4 700 16 8
+
+					/* IDSEL 0x15 */
+					 a800 0 0 1 700 14 8
+					 a800 0 0 2 700 15 8
+					 a800 0 0 3 700 16 8
+					 a800 0 0 4 700 17 8
+
+					/* IDSEL 0x16 */
+					 b000 0 0 1 700 17 8
+					 b000 0 0 2 700 14 8
+					 b000 0 0 3 700 15 8
+					 b000 0 0 4 700 16 8
+
+					/* IDSEL 0x17 */
+					 b800 0 0 1 700 16 8
+					 b800 0 0 2 700 17 8
+					 b800 0 0 3 700 14 8
+					 b800 0 0 4 700 15 8
+
+					/* IDSEL 0x18 */
+					 c000 0 0 1 700 15 8
+					 c000 0 0 2 700 16 8
+					 c000 0 0 3 700 17 8
+					 c000 0 0 4 700 14 8>;
+			interrupt-parent = <700>;
+			interrupts = <42 8>;
+			bus-range = <0 0>;
+			ranges = <02000000 0 b0000000 b0000000 0 10000000
+				  42000000 0 90000000 90000000 0 10000000
+				  01000000 0 00000000 e2100000 0 00100000>;
+			clock-frequency = <3f940aa>;
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			reg = <8600 100>;
+			compatible = "83xx";
+			device_type = "pci";
+		};
+
+		/* May need to remove if on a part without crypto engine */
+		crypto@30000 {
+			device_type = "crypto";
+			model = "SEC2";
+			compatible = "talitos";
+			reg = <30000 10000>;
+			interrupts = <b 8>;
+			interrupt-parent = <700>;
+			num-channels = <4>;
+			channel-fifo-len = <18>;
+			exec-units-mask = <0000007e>;
+			/* desc mask is for rev2.0,
+			 * we need runtime fixup for >2.0 */
+			descriptor-types-mask = <01010ebf>;
+		};
+
+		/* IPIC
+		 * interrupts cell = <intr #, sense>
+		 * sense values match linux IORESOURCE_IRQ_* defines:
+		 * sense == 8: Level, low assertion
+		 * sense == 2: Edge, high-to-low change
+		 */
+		pic@700 {
+			linux,phandle = <700>;
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <700 100>;
+			built-in;
+			device_type = "ipic";
+		};
+	};
+};