[POWERPC] Move PCI nodes to be sibilings with SOC nodes

Updated the device trees to have the PCI nodes be at the same level as
the SOC node.  This is to make it so that the SOC nodes children address
space is just on chip registers and not other bus memory as well.

Also, for PCIe nodes added a P2P bridge to handle the virtual P2P bridge
that exists in the PHB.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

1 files changed, 120 insertions, 120 deletions

diff --git a/arch/powerpc/boot/dts/mpc834x_mds.dts b/arch/powerpc/boot/dts/mpc834x_mds.dts
index f4ba8577540..1b8882e2004 100644
--- a/arch/powerpc/boot/dts/mpc834x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc834x_mds.dts
@@ -183,126 +183,6 @@
 			interrupt-parent = < &ipic >;
 		};
 
-		pci@8500 {
-			interrupt-map-mask = <f800 0 0 7>;
-			interrupt-map = <
-
-					/* IDSEL 0x11 */
-					 8800 0 0 1 &ipic 14 8
-					 8800 0 0 2 &ipic 15 8
-					 8800 0 0 3 &ipic 16 8
-					 8800 0 0 4 &ipic 17 8
-
-					/* IDSEL 0x12 */
-					 9000 0 0 1 &ipic 16 8
-					 9000 0 0 2 &ipic 17 8
-					 9000 0 0 3 &ipic 14 8
-					 9000 0 0 4 &ipic 15 8
-
-					/* IDSEL 0x13 */
-					 9800 0 0 1 &ipic 17 8
-					 9800 0 0 2 &ipic 14 8
-					 9800 0 0 3 &ipic 15 8
-					 9800 0 0 4 &ipic 16 8
-
-					/* IDSEL 0x15 */
-					 a800 0 0 1 &ipic 14 8
-					 a800 0 0 2 &ipic 15 8
-					 a800 0 0 3 &ipic 16 8
-					 a800 0 0 4 &ipic 17 8
-
-					/* IDSEL 0x16 */
-					 b000 0 0 1 &ipic 17 8
-					 b000 0 0 2 &ipic 14 8
-					 b000 0 0 3 &ipic 15 8
-					 b000 0 0 4 &ipic 16 8
-
-					/* IDSEL 0x17 */
-					 b800 0 0 1 &ipic 16 8
-					 b800 0 0 2 &ipic 17 8
-					 b800 0 0 3 &ipic 14 8
-					 b800 0 0 4 &ipic 15 8
-
-					/* IDSEL 0x18 */
-					 c000 0 0 1 &ipic 15 8
-					 c000 0 0 2 &ipic 16 8
-					 c000 0 0 3 &ipic 17 8
-					 c000 0 0 4 &ipic 14 8>;
-			interrupt-parent = < &ipic >;
-			interrupts = <42 8>;
-			bus-range = <0 0>;
-			ranges = <02000000 0 90000000 90000000 0 10000000
-				  42000000 0 80000000 80000000 0 10000000
-				  01000000 0 00000000 e2000000 0 00100000>;
-			clock-frequency = <3f940aa>;
-			#interrupt-cells = <1>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			reg = <8500 100>;
-			compatible = "fsl,mpc8349-pci";
-			device_type = "pci";
-		};
-
-		pci@8600 {
-			interrupt-map-mask = <f800 0 0 7>;
-			interrupt-map = <
-
-					/* IDSEL 0x11 */
-					 8800 0 0 1 &ipic 14 8
-					 8800 0 0 2 &ipic 15 8
-					 8800 0 0 3 &ipic 16 8
-					 8800 0 0 4 &ipic 17 8
-
-					/* IDSEL 0x12 */
-					 9000 0 0 1 &ipic 16 8
-					 9000 0 0 2 &ipic 17 8
-					 9000 0 0 3 &ipic 14 8
-					 9000 0 0 4 &ipic 15 8
-
-					/* IDSEL 0x13 */
-					 9800 0 0 1 &ipic 17 8
-					 9800 0 0 2 &ipic 14 8
-					 9800 0 0 3 &ipic 15 8
-					 9800 0 0 4 &ipic 16 8
-
-					/* IDSEL 0x15 */
-					 a800 0 0 1 &ipic 14 8
-					 a800 0 0 2 &ipic 15 8
-					 a800 0 0 3 &ipic 16 8
-					 a800 0 0 4 &ipic 17 8
-
-					/* IDSEL 0x16 */
-					 b000 0 0 1 &ipic 17 8
-					 b000 0 0 2 &ipic 14 8
-					 b000 0 0 3 &ipic 15 8
-					 b000 0 0 4 &ipic 16 8
-
-					/* IDSEL 0x17 */
-					 b800 0 0 1 &ipic 16 8
-					 b800 0 0 2 &ipic 17 8
-					 b800 0 0 3 &ipic 14 8
-					 b800 0 0 4 &ipic 15 8
-
-					/* IDSEL 0x18 */
-					 c000 0 0 1 &ipic 15 8
-					 c000 0 0 2 &ipic 16 8
-					 c000 0 0 3 &ipic 17 8
-					 c000 0 0 4 &ipic 14 8>;
-			interrupt-parent = < &ipic >;
-			interrupts = <42 8>;
-			bus-range = <0 0>;
-			ranges = <02000000 0 b0000000 b0000000 0 10000000
-				  42000000 0 a0000000 a0000000 0 10000000
-				  01000000 0 00000000 e2100000 0 00100000>;
-			clock-frequency = <3f940aa>;
-			#interrupt-cells = <1>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			reg = <8600 100>;
-			compatible = "fsl,mpc8349-pci";
-			device_type = "pci";
-		};
-
 		/* May need to remove if on a part without crypto engine */
 		crypto@30000 {
 			device_type = "crypto";
@@ -333,4 +213,124 @@
 			device_type = "ipic";
 		};
 	};
+
+	pci@e0008500 {
+		interrupt-map-mask = <f800 0 0 7>;
+		interrupt-map = <
+
+				/* IDSEL 0x11 */
+				 8800 0 0 1 &ipic 14 8
+				 8800 0 0 2 &ipic 15 8
+				 8800 0 0 3 &ipic 16 8
+				 8800 0 0 4 &ipic 17 8
+
+				/* IDSEL 0x12 */
+				 9000 0 0 1 &ipic 16 8
+				 9000 0 0 2 &ipic 17 8
+				 9000 0 0 3 &ipic 14 8
+				 9000 0 0 4 &ipic 15 8
+
+				/* IDSEL 0x13 */
+				 9800 0 0 1 &ipic 17 8
+				 9800 0 0 2 &ipic 14 8
+				 9800 0 0 3 &ipic 15 8
+				 9800 0 0 4 &ipic 16 8
+
+				/* IDSEL 0x15 */
+				 a800 0 0 1 &ipic 14 8
+				 a800 0 0 2 &ipic 15 8
+				 a800 0 0 3 &ipic 16 8
+				 a800 0 0 4 &ipic 17 8
+
+				/* IDSEL 0x16 */
+				 b000 0 0 1 &ipic 17 8
+				 b000 0 0 2 &ipic 14 8
+				 b000 0 0 3 &ipic 15 8
+				 b000 0 0 4 &ipic 16 8
+
+				/* IDSEL 0x17 */
+				 b800 0 0 1 &ipic 16 8
+				 b800 0 0 2 &ipic 17 8
+				 b800 0 0 3 &ipic 14 8
+				 b800 0 0 4 &ipic 15 8
+
+				/* IDSEL 0x18 */
+				 c000 0 0 1 &ipic 15 8
+				 c000 0 0 2 &ipic 16 8
+				 c000 0 0 3 &ipic 17 8
+				 c000 0 0 4 &ipic 14 8>;
+		interrupt-parent = < &ipic >;
+		interrupts = <42 8>;
+		bus-range = <0 0>;
+		ranges = <02000000 0 90000000 90000000 0 10000000
+			  42000000 0 80000000 80000000 0 10000000
+			  01000000 0 00000000 e2000000 0 00100000>;
+		clock-frequency = <3f940aa>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <e0008500 100>;
+		compatible = "fsl,mpc8349-pci";
+		device_type = "pci";
+	};
+
+	pci@e0008600 {
+		interrupt-map-mask = <f800 0 0 7>;
+		interrupt-map = <
+
+				/* IDSEL 0x11 */
+				 8800 0 0 1 &ipic 14 8
+				 8800 0 0 2 &ipic 15 8
+				 8800 0 0 3 &ipic 16 8
+				 8800 0 0 4 &ipic 17 8
+
+				/* IDSEL 0x12 */
+				 9000 0 0 1 &ipic 16 8
+				 9000 0 0 2 &ipic 17 8
+				 9000 0 0 3 &ipic 14 8
+				 9000 0 0 4 &ipic 15 8
+
+				/* IDSEL 0x13 */
+				 9800 0 0 1 &ipic 17 8
+				 9800 0 0 2 &ipic 14 8
+				 9800 0 0 3 &ipic 15 8
+				 9800 0 0 4 &ipic 16 8
+
+				/* IDSEL 0x15 */
+				 a800 0 0 1 &ipic 14 8
+				 a800 0 0 2 &ipic 15 8
+				 a800 0 0 3 &ipic 16 8
+				 a800 0 0 4 &ipic 17 8
+
+				/* IDSEL 0x16 */
+				 b000 0 0 1 &ipic 17 8
+				 b000 0 0 2 &ipic 14 8
+				 b000 0 0 3 &ipic 15 8
+				 b000 0 0 4 &ipic 16 8
+
+				/* IDSEL 0x17 */
+				 b800 0 0 1 &ipic 16 8
+				 b800 0 0 2 &ipic 17 8
+				 b800 0 0 3 &ipic 14 8
+				 b800 0 0 4 &ipic 15 8
+
+				/* IDSEL 0x18 */
+				 c000 0 0 1 &ipic 15 8
+				 c000 0 0 2 &ipic 16 8
+				 c000 0 0 3 &ipic 17 8
+				 c000 0 0 4 &ipic 14 8>;
+		interrupt-parent = < &ipic >;
+		interrupts = <42 8>;
+		bus-range = <0 0>;
+		ranges = <02000000 0 b0000000 b0000000 0 10000000
+			  42000000 0 a0000000 a0000000 0 10000000
+			  01000000 0 00000000 e2100000 0 00100000>;
+		clock-frequency = <3f940aa>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <e0008600 100>;
+		compatible = "fsl,mpc8349-pci";
+		device_type = "pci";
+	};
 };