[POWERPC] 83xx: add device trees for MPC837x MDS board

Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

1 files changed, 279 insertions, 0 deletions

diff --git a/arch/powerpc/boot/dts/mpc8377_mds.dts b/arch/powerpc/boot/dts/mpc8377_mds.dts
new file mode 100644
index 00000000000..98b46065f45
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc8377_mds.dts
@@ -0,0 +1,279 @@
+/*
+ * MPC8377E MDS Device Tree Source
+ *
+ * Copyright 2007 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "fsl,mpc8377emds";
+	compatible = "fsl,mpc8377emds","fsl,mpc837xmds";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8377@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <0x20>;
+			i-cache-line-size = <0x20>;
+			d-cache-size = <0x8000>;		// L1, 32K
+			i-cache-size = <0x8000>;		// L1, 32K
+			timebase-frequency = <0>;
+			bus-frequency = <0>;
+			clock-frequency = <0>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;	// 512MB at 0
+	};
+
+	soc@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		ranges = <0x0 0xe0000000 0x00100000>;
+		reg = <0xe0000000 0x00000200>;
+		bus-frequency = <0>;
+
+		wdt@200 {
+			compatible = "mpc83xx_wdt";
+			reg = <0x200 0x100>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <0xe 0x8>;
+			interrupt-parent = < &ipic >;
+			dfsrr;
+		};
+
+		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <0xf 0x8>;
+			interrupt-parent = < &ipic >;
+			dfsrr;
+		};
+
+		spi@7000 {
+			compatible = "fsl_spi";
+			reg = <0x7000 0x1000>;
+			interrupts = <0x10 0x8>;
+			interrupt-parent = < &ipic >;
+			mode = "cpu";
+		};
+
+		/* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
+		usb@23000 {
+			compatible = "fsl-usb2-dr";
+			reg = <0x23000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupt-parent = < &ipic >;
+			interrupts = <0x26 0x8>;
+			phy_type = "utmi_wide";
+		};
+
+		mdio@24520 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,gianfar-mdio";
+			reg = <0x24520 0x20>;
+			phy2: ethernet-phy@2 {
+				interrupt-parent = < &ipic >;
+				interrupts = <0x11 0x8>;
+				reg = <2>;
+				device_type = "ethernet-phy";
+			};
+			phy3: ethernet-phy@3 {
+				interrupt-parent = < &ipic >;
+				interrupts = <0x12 0x8>;
+				reg = <3>;
+				device_type = "ethernet-phy";
+			};
+		};
+
+		enet0: ethernet@24000 {
+			cell-index = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <0x20 0x8 0x21 0x8 0x22 0x8>;
+			phy-connection-type = "mii";
+			interrupt-parent = < &ipic >;
+			phy-handle = < &phy2 >;
+		};
+
+		enet1: ethernet@25000 {
+			cell-index = <1>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x25000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <0x23 0x8 0x24 0x8 0x25 0x8>;
+			phy-connection-type = "mii";
+			interrupt-parent = < &ipic >;
+			phy-handle = < &phy3 >;
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <0>;
+			interrupts = <0x9 0x8>;
+			interrupt-parent = < &ipic >;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4600 0x100>;
+			clock-frequency = <0>;
+			interrupts = <0xa 0x8>;
+			interrupt-parent = < &ipic >;
+		};
+
+		crypto@30000 {
+			model = "SEC3";
+			compatible = "talitos";
+			reg = <0x30000 0x10000>;
+			interrupts = <0xb 0x8>;
+			interrupt-parent = < &ipic >;
+			/* Rev. 3.0 geometry */
+			num-channels = <4>;
+			channel-fifo-len = <0x18>;
+			exec-units-mask = <0x000001fe>;
+			descriptor-types-mask = <0x03ab0ebf>;
+		};
+
+		sdhc@2e000 {
+			model = "eSDHC";
+			compatible = "fsl,esdhc";
+			reg = <0x2e000 0x1000>;
+			interrupts = <0x2a 0x8>;
+			interrupt-parent = < &ipic >;
+		};
+
+		sata@18000 {
+			compatible = "fsl,mpc8379-sata";
+			reg = <0x18000 0x1000>;
+			interrupts = <0x2c 0x8>;
+			interrupt-parent = < &ipic >;
+		};
+
+		sata@19000 {
+			compatible = "fsl,mpc8379-sata";
+			reg = <0x19000 0x1000>;
+			interrupts = <0x2d 0x8>;
+			interrupt-parent = < &ipic >;
+		};
+
+		/* IPIC
+		 * interrupts cell = <intr #, sense>
+		 * sense values match linux IORESOURCE_IRQ_* defines:
+		 * sense == 8: Level, low assertion
+		 * sense == 2: Edge, high-to-low change
+		 */
+		ipic: pic@700 {
+			compatible = "fsl,ipic";
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x700 0x100>;
+		};
+	};
+
+	pci0: pci@e0008500 {
+		cell-index = <0>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+
+				/* IDSEL 0x11 */
+				 0x8800 0x0 0x0 0x1 &ipic 0x14 0x8
+				 0x8800 0x0 0x0 0x2 &ipic 0x15 0x8
+				 0x8800 0x0 0x0 0x3 &ipic 0x16 0x8
+				 0x8800 0x0 0x0 0x4 &ipic 0x17 0x8
+
+				/* IDSEL 0x12 */
+				 0x9000 0x0 0x0 0x1 &ipic 0x16 0x8
+				 0x9000 0x0 0x0 0x2 &ipic 0x17 0x8
+				 0x9000 0x0 0x0 0x3 &ipic 0x14 0x8
+				 0x9000 0x0 0x0 0x4 &ipic 0x15 0x8
+
+				/* IDSEL 0x13 */
+				 0x9800 0x0 0x0 0x1 &ipic 0x17 0x8
+				 0x9800 0x0 0x0 0x2 &ipic 0x14 0x8
+				 0x9800 0x0 0x0 0x3 &ipic 0x15 0x8
+				 0x9800 0x0 0x0 0x4 &ipic 0x16 0x8
+
+				/* IDSEL 0x15 */
+				 0xa800 0x0 0x0 0x1 &ipic 0x14 0x8
+				 0xa800 0x0 0x0 0x2 &ipic 0x15 0x8
+				 0xa800 0x0 0x0 0x3 &ipic 0x16 0x8
+				 0xa800 0x0 0x0 0x4 &ipic 0x17 0x8
+
+				/* IDSEL 0x16 */
+				 0xb000 0x0 0x0 0x1 &ipic 0x17 0x8
+				 0xb000 0x0 0x0 0x2 &ipic 0x14 0x8
+				 0xb000 0x0 0x0 0x3 &ipic 0x15 0x8
+				 0xb000 0x0 0x0 0x4 &ipic 0x16 0x8
+
+				/* IDSEL 0x17 */
+				 0xb800 0x0 0x0 0x1 &ipic 0x16 0x8
+				 0xb800 0x0 0x0 0x2 &ipic 0x17 0x8
+				 0xb800 0x0 0x0 0x3 &ipic 0x14 0x8
+				 0xb800 0x0 0x0 0x4 &ipic 0x15 0x8
+
+				/* IDSEL 0x18 */
+				 0xc000 0x0 0x0 0x1 &ipic 0x15 0x8
+				 0xc000 0x0 0x0 0x2 &ipic 0x16 0x8
+				 0xc000 0x0 0x0 0x3 &ipic 0x17 0x8
+				 0xc000 0x0 0x0 0x4 &ipic 0x14 0x8>;
+		interrupt-parent = < &ipic >;
+		interrupts = <0x42 0x8>;
+		bus-range = <0 0>;
+		ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
+		          0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
+		          0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>;
+		clock-frequency = <0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xe0008500 0x100>;
+		compatible = "fsl,mpc8349-pci";
+		device_type = "pci";
+	};
+};