[POWERPC] Move PCI nodes to be sibilings with SOC nodes

Updated the device trees to have the PCI nodes be at the same level as
the SOC node.  This is to make it so that the SOC nodes children address
space is just on chip registers and not other bus memory as well.

Also, for PCIe nodes added a P2P bridge to handle the virtual P2P bridge
that exists in the PHB.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

1 files changed, 86 insertions, 86 deletions

diff --git a/arch/powerpc/boot/dts/mpc8540ads.dts b/arch/powerpc/boot/dts/mpc8540ads.dts
index e038c04b422..6442a717ec3 100644
--- a/arch/powerpc/boot/dts/mpc8540ads.dts
+++ b/arch/powerpc/boot/dts/mpc8540ads.dts
@@ -171,104 +171,104 @@
 			interrupts = <2a 2>;
 			interrupt-parent = <&mpic>;
 		};
-		pci@8000 {
-			interrupt-map-mask = <f800 0 0 7>;
-			interrupt-map = <
+		mpic: pic@40000 {
+			clock-frequency = <0>;
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <40000 40000>;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+			big-endian;
+		};
+	};
 
-				/* IDSEL 0x02 */
-				1000 0 0 1 &mpic 1 1
-				1000 0 0 2 &mpic 2 1
-				1000 0 0 3 &mpic 3 1
-				1000 0 0 4 &mpic 4 1
+	pci@e0008000 {
+		interrupt-map-mask = <f800 0 0 7>;
+		interrupt-map = <
 
-				/* IDSEL 0x03 */
-				1800 0 0 1 &mpic 4 1
-				1800 0 0 2 &mpic 1 1
-				1800 0 0 3 &mpic 2 1
-				1800 0 0 4 &mpic 3 1
+			/* IDSEL 0x02 */
+			1000 0 0 1 &mpic 1 1
+			1000 0 0 2 &mpic 2 1
+			1000 0 0 3 &mpic 3 1
+			1000 0 0 4 &mpic 4 1
 
-				/* IDSEL 0x04 */
-				2000 0 0 1 &mpic 3 1
-				2000 0 0 2 &mpic 4 1
-				2000 0 0 3 &mpic 1 1
-				2000 0 0 4 &mpic 2 1
+			/* IDSEL 0x03 */
+			1800 0 0 1 &mpic 4 1
+			1800 0 0 2 &mpic 1 1
+			1800 0 0 3 &mpic 2 1
+			1800 0 0 4 &mpic 3 1
 
-				/* IDSEL 0x05 */
-				2800 0 0 1 &mpic 2 1
-				2800 0 0 2 &mpic 3 1
-				2800 0 0 3 &mpic 4 1
-				2800 0 0 4 &mpic 1 1
+			/* IDSEL 0x04 */
+			2000 0 0 1 &mpic 3 1
+			2000 0 0 2 &mpic 4 1
+			2000 0 0 3 &mpic 1 1
+			2000 0 0 4 &mpic 2 1
 
-				/* IDSEL 0x0c */
-				6000 0 0 1 &mpic 1 1
-				6000 0 0 2 &mpic 2 1
-				6000 0 0 3 &mpic 3 1
-				6000 0 0 4 &mpic 4 1
+			/* IDSEL 0x05 */
+			2800 0 0 1 &mpic 2 1
+			2800 0 0 2 &mpic 3 1
+			2800 0 0 3 &mpic 4 1
+			2800 0 0 4 &mpic 1 1
 
-				/* IDSEL 0x0d */
-				6800 0 0 1 &mpic 4 1
-				6800 0 0 2 &mpic 1 1
-				6800 0 0 3 &mpic 2 1
-				6800 0 0 4 &mpic 3 1
+			/* IDSEL 0x0c */
+			6000 0 0 1 &mpic 1 1
+			6000 0 0 2 &mpic 2 1
+			6000 0 0 3 &mpic 3 1
+			6000 0 0 4 &mpic 4 1
 
-				/* IDSEL 0x0e */
-				7000 0 0 1 &mpic 3 1
-				7000 0 0 2 &mpic 4 1
-				7000 0 0 3 &mpic 1 1
-				7000 0 0 4 &mpic 2 1
+			/* IDSEL 0x0d */
+			6800 0 0 1 &mpic 4 1
+			6800 0 0 2 &mpic 1 1
+			6800 0 0 3 &mpic 2 1
+			6800 0 0 4 &mpic 3 1
 
-				/* IDSEL 0x0f */
-				7800 0 0 1 &mpic 2 1
-				7800 0 0 2 &mpic 3 1
-				7800 0 0 3 &mpic 4 1
-				7800 0 0 4 &mpic 1 1
+			/* IDSEL 0x0e */
+			7000 0 0 1 &mpic 3 1
+			7000 0 0 2 &mpic 4 1
+			7000 0 0 3 &mpic 1 1
+			7000 0 0 4 &mpic 2 1
 
-				/* IDSEL 0x12 */
-				9000 0 0 1 &mpic 1 1
-				9000 0 0 2 &mpic 2 1
-				9000 0 0 3 &mpic 3 1
-				9000 0 0 4 &mpic 4 1
+			/* IDSEL 0x0f */
+			7800 0 0 1 &mpic 2 1
+			7800 0 0 2 &mpic 3 1
+			7800 0 0 3 &mpic 4 1
+			7800 0 0 4 &mpic 1 1
 
-				/* IDSEL 0x13 */
-				9800 0 0 1 &mpic 4 1
-				9800 0 0 2 &mpic 1 1
-				9800 0 0 3 &mpic 2 1
-				9800 0 0 4 &mpic 3 1
+			/* IDSEL 0x12 */
+			9000 0 0 1 &mpic 1 1
+			9000 0 0 2 &mpic 2 1
+			9000 0 0 3 &mpic 3 1
+			9000 0 0 4 &mpic 4 1
 
-				/* IDSEL 0x14 */
-				a000 0 0 1 &mpic 3 1
-				a000 0 0 2 &mpic 4 1
-				a000 0 0 3 &mpic 1 1
-				a000 0 0 4 &mpic 2 1
+			/* IDSEL 0x13 */
+			9800 0 0 1 &mpic 4 1
+			9800 0 0 2 &mpic 1 1
+			9800 0 0 3 &mpic 2 1
+			9800 0 0 4 &mpic 3 1
 
-				/* IDSEL 0x15 */
-				a800 0 0 1 &mpic 2 1
-				a800 0 0 2 &mpic 3 1
-				a800 0 0 3 &mpic 4 1
-				a800 0 0 4 &mpic 1 1>;
-			interrupt-parent = <&mpic>;
-			interrupts = <18 2>;
-			bus-range = <0 0>;
-			ranges = <02000000 0 80000000 80000000 0 20000000
-				  01000000 0 00000000 e2000000 0 00100000>;
-			clock-frequency = <3f940aa>;
-			#interrupt-cells = <1>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			reg = <8000 1000>;
-			compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
-			device_type = "pci";
-		};
+			/* IDSEL 0x14 */
+			a000 0 0 1 &mpic 3 1
+			a000 0 0 2 &mpic 4 1
+			a000 0 0 3 &mpic 1 1
+			a000 0 0 4 &mpic 2 1
 
-		mpic: pic@40000 {
-			clock-frequency = <0>;
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			reg = <40000 40000>;
-			compatible = "chrp,open-pic";
-			device_type = "open-pic";
-			big-endian;
-		};
+			/* IDSEL 0x15 */
+			a800 0 0 1 &mpic 2 1
+			a800 0 0 2 &mpic 3 1
+			a800 0 0 3 &mpic 4 1
+			a800 0 0 4 &mpic 1 1>;
+		interrupt-parent = <&mpic>;
+		interrupts = <18 2>;
+		bus-range = <0 0>;
+		ranges = <02000000 0 80000000 80000000 0 20000000
+			  01000000 0 00000000 e2000000 0 00100000>;
+		clock-frequency = <3f940aa>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <e0008000 1000>;
+		compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
+		device_type = "pci";
 	};
 };