[POWERPC] Move PCI nodes to be sibilings with SOC nodes

Updated the device trees to have the PCI nodes be at the same level as
the SOC node.  This is to make it so that the SOC nodes children address
space is just on chip registers and not other bus memory as well.

Also, for PCIe nodes added a P2P bridge to handle the virtual P2P bridge
that exists in the PHB.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

1 files changed, 203 insertions, 196 deletions

diff --git a/arch/powerpc/boot/dts/mpc8548cds.dts b/arch/powerpc/boot/dts/mpc8548cds.dts
index 11b823595a0..69ca5025d97 100644
--- a/arch/powerpc/boot/dts/mpc8548cds.dts
+++ b/arch/powerpc/boot/dts/mpc8548cds.dts
@@ -42,13 +42,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
-		ranges = <00001000 e0001000 000ff000
-			  80000000 80000000 10000000
-			  e2000000 e2000000 00800000
-			  90000000 90000000 10000000
-			  e2800000 e2800000 00800000
-			  a0000000 a0000000 20000000
-		          e3000000 e3000000 01000000>;
+		ranges = <00000000 e0000000 00100000>;
 		reg = <e0000000 00001000>;	// CCSRBAR
 		bus-frequency = <0>;
 
@@ -187,212 +181,225 @@
 			fsl,has-rstcr;
 		};
 
-		pci@8000 {
+		mpic: pic@40000 {
+			clock-frequency = <0>;
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <40000 40000>;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+                        big-endian;
+		};
+	};
+
+	pci@e0008000 {
+		interrupt-map-mask = <f800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x4 (PCIX Slot 2) */
+			02000 0 0 1 &mpic 0 1
+			02000 0 0 2 &mpic 1 1
+			02000 0 0 3 &mpic 2 1
+			02000 0 0 4 &mpic 3 1
+
+			/* IDSEL 0x5 (PCIX Slot 3) */
+			02800 0 0 1 &mpic 1 1
+			02800 0 0 2 &mpic 2 1
+			02800 0 0 3 &mpic 3 1
+			02800 0 0 4 &mpic 0 1
+
+			/* IDSEL 0x6 (PCIX Slot 4) */
+			03000 0 0 1 &mpic 2 1
+			03000 0 0 2 &mpic 3 1
+			03000 0 0 3 &mpic 0 1
+			03000 0 0 4 &mpic 1 1
+
+			/* IDSEL 0x8 (PCIX Slot 5) */
+			04000 0 0 1 &mpic 0 1
+			04000 0 0 2 &mpic 1 1
+			04000 0 0 3 &mpic 2 1
+			04000 0 0 4 &mpic 3 1
+
+			/* IDSEL 0xC (Tsi310 bridge) */
+			06000 0 0 1 &mpic 0 1
+			06000 0 0 2 &mpic 1 1
+			06000 0 0 3 &mpic 2 1
+			06000 0 0 4 &mpic 3 1
+
+			/* IDSEL 0x14 (Slot 2) */
+			0a000 0 0 1 &mpic 0 1
+			0a000 0 0 2 &mpic 1 1
+			0a000 0 0 3 &mpic 2 1
+			0a000 0 0 4 &mpic 3 1
+
+			/* IDSEL 0x15 (Slot 3) */
+			0a800 0 0 1 &mpic 1 1
+			0a800 0 0 2 &mpic 2 1
+			0a800 0 0 3 &mpic 3 1
+			0a800 0 0 4 &mpic 0 1
+
+			/* IDSEL 0x16 (Slot 4) */
+			0b000 0 0 1 &mpic 2 1
+			0b000 0 0 2 &mpic 3 1
+			0b000 0 0 3 &mpic 0 1
+			0b000 0 0 4 &mpic 1 1
+
+			/* IDSEL 0x18 (Slot 5) */
+			0c000 0 0 1 &mpic 0 1
+			0c000 0 0 2 &mpic 1 1
+			0c000 0 0 3 &mpic 2 1
+			0c000 0 0 4 &mpic 3 1
+
+			/* IDSEL 0x1C (Tsi310 bridge PCI primary) */
+			0E000 0 0 1 &mpic 0 1
+			0E000 0 0 2 &mpic 1 1
+			0E000 0 0 3 &mpic 2 1
+			0E000 0 0 4 &mpic 3 1>;
+
+		interrupt-parent = <&mpic>;
+		interrupts = <18 2>;
+		bus-range = <0 0>;
+		ranges = <02000000 0 80000000 80000000 0 10000000
+			  01000000 0 00000000 e2000000 0 00800000>;
+		clock-frequency = <3f940aa>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <e0008000 1000>;
+		compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
+		device_type = "pci";
+
+		pci_bridge@1c {
 			interrupt-map-mask = <f800 0 0 7>;
 			interrupt-map = <
-				/* IDSEL 0x4 (PCIX Slot 2) */
-				02000 0 0 1 &mpic 0 1
-				02000 0 0 2 &mpic 1 1
-				02000 0 0 3 &mpic 2 1
-				02000 0 0 4 &mpic 3 1
-
-				/* IDSEL 0x5 (PCIX Slot 3) */
-				02800 0 0 1 &mpic 1 1
-				02800 0 0 2 &mpic 2 1
-				02800 0 0 3 &mpic 3 1
-				02800 0 0 4 &mpic 0 1
-
-				/* IDSEL 0x6 (PCIX Slot 4) */
-				03000 0 0 1 &mpic 2 1
-				03000 0 0 2 &mpic 3 1
-				03000 0 0 3 &mpic 0 1
-				03000 0 0 4 &mpic 1 1
-
-				/* IDSEL 0x8 (PCIX Slot 5) */
-				04000 0 0 1 &mpic 0 1
-				04000 0 0 2 &mpic 1 1
-				04000 0 0 3 &mpic 2 1
-				04000 0 0 4 &mpic 3 1
-
-				/* IDSEL 0xC (Tsi310 bridge) */
-				06000 0 0 1 &mpic 0 1
-				06000 0 0 2 &mpic 1 1
-				06000 0 0 3 &mpic 2 1
-				06000 0 0 4 &mpic 3 1
-
-				/* IDSEL 0x14 (Slot 2) */
-				0a000 0 0 1 &mpic 0 1
-				0a000 0 0 2 &mpic 1 1
-				0a000 0 0 3 &mpic 2 1
-				0a000 0 0 4 &mpic 3 1
-
-				/* IDSEL 0x15 (Slot 3) */
-				0a800 0 0 1 &mpic 1 1
-				0a800 0 0 2 &mpic 2 1
-				0a800 0 0 3 &mpic 3 1
-				0a800 0 0 4 &mpic 0 1
-
-				/* IDSEL 0x16 (Slot 4) */
-				0b000 0 0 1 &mpic 2 1
-				0b000 0 0 2 &mpic 3 1
-				0b000 0 0 3 &mpic 0 1
-				0b000 0 0 4 &mpic 1 1
-
-				/* IDSEL 0x18 (Slot 5) */
-				0c000 0 0 1 &mpic 0 1
-				0c000 0 0 2 &mpic 1 1
-				0c000 0 0 3 &mpic 2 1
-				0c000 0 0 4 &mpic 3 1
-
-				/* IDSEL 0x1C (Tsi310 bridge PCI primary) */
-				0E000 0 0 1 &mpic 0 1
-				0E000 0 0 2 &mpic 1 1
-				0E000 0 0 3 &mpic 2 1
-				0E000 0 0 4 &mpic 3 1>;
 
-			interrupt-parent = <&mpic>;
-			interrupts = <18 2>;
-			bus-range = <0 0>;
-			ranges = <02000000 0 80000000 80000000 0 10000000
-				  01000000 0 00000000 e2000000 0 00800000>;
-			clock-frequency = <3f940aa>;
+				/* IDSEL 0x00 (PrPMC Site) */
+				0000 0 0 1 &mpic 0 1
+				0000 0 0 2 &mpic 1 1
+				0000 0 0 3 &mpic 2 1
+				0000 0 0 4 &mpic 3 1
+
+				/* IDSEL 0x04 (VIA chip) */
+				2000 0 0 1 &mpic 0 1
+				2000 0 0 2 &mpic 1 1
+				2000 0 0 3 &mpic 2 1
+				2000 0 0 4 &mpic 3 1
+
+				/* IDSEL 0x05 (8139) */
+				2800 0 0 1 &mpic 1 1
+
+				/* IDSEL 0x06 (Slot 6) */
+				3000 0 0 1 &mpic 2 1
+				3000 0 0 2 &mpic 3 1
+				3000 0 0 3 &mpic 0 1
+				3000 0 0 4 &mpic 1 1
+
+				/* IDESL 0x07 (Slot 7) */
+				3800 0 0 1 &mpic 3 1
+				3800 0 0 2 &mpic 0 1
+				3800 0 0 3 &mpic 1 1
+				3800 0 0 4 &mpic 2 1>;
+
+			reg = <e000 0 0 0 0>;
 			#interrupt-cells = <1>;
 			#size-cells = <2>;
 			#address-cells = <3>;
-			reg = <8000 1000>;
-			compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
-			device_type = "pci";
+			ranges = <02000000 0 80000000
+				  02000000 0 80000000
+				  0 20000000
+				  01000000 0 00000000
+				  01000000 0 00000000
+				  0 00080000>;
+			clock-frequency = <1fca055>;
 
-			pci_bridge@1c {
-				interrupt-map-mask = <f800 0 0 7>;
-				interrupt-map = <
-
-					/* IDSEL 0x00 (PrPMC Site) */
-					0000 0 0 1 &mpic 0 1
-					0000 0 0 2 &mpic 1 1
-					0000 0 0 3 &mpic 2 1
-					0000 0 0 4 &mpic 3 1
-
-					/* IDSEL 0x04 (VIA chip) */
-					2000 0 0 1 &mpic 0 1
-					2000 0 0 2 &mpic 1 1
-					2000 0 0 3 &mpic 2 1
-					2000 0 0 4 &mpic 3 1
-
-					/* IDSEL 0x05 (8139) */
-					2800 0 0 1 &mpic 1 1
-
-					/* IDSEL 0x06 (Slot 6) */
-					3000 0 0 1 &mpic 2 1
-					3000 0 0 2 &mpic 3 1
-					3000 0 0 3 &mpic 0 1
-					3000 0 0 4 &mpic 1 1
-
-					/* IDESL 0x07 (Slot 7) */
-					3800 0 0 1 &mpic 3 1
-					3800 0 0 2 &mpic 0 1
-					3800 0 0 3 &mpic 1 1
-					3800 0 0 4 &mpic 2 1>;
-
-				reg = <e000 0 0 0 0>;
-				#interrupt-cells = <1>;
-				#size-cells = <2>;
-				#address-cells = <3>;
-				ranges = <02000000 0 80000000
-					  02000000 0 80000000
-					  0 20000000
-					  01000000 0 00000000
-					  01000000 0 00000000
-					  0 00080000>;
-				clock-frequency = <1fca055>;
-
-				isa@4 {
-					device_type = "isa";
+			isa@4 {
+				device_type = "isa";
+				#interrupt-cells = <2>;
+				#size-cells = <1>;
+				#address-cells = <2>;
+				reg = <2000 0 0 0 0>;
+				ranges = <1 0 01000000 0 0 00001000>;
+				interrupt-parent = <&i8259>;
+
+				i8259: interrupt-controller@20 {
+					interrupt-controller;
+					device_type = "interrupt-controller";
+					reg = <1 20 2
+					       1 a0 2
+					       1 4d0 2>;
+					#address-cells = <0>;
 					#interrupt-cells = <2>;
-					#size-cells = <1>;
-					#address-cells = <2>;
-					reg = <2000 0 0 0 0>;
-					ranges = <1 0 01000000 0 0 00001000>;
-					interrupt-parent = <&i8259>;
-
-					i8259: interrupt-controller@20 {
-						interrupt-controller;
-						device_type = "interrupt-controller";
-						reg = <1 20 2
-						       1 a0 2
-						       1 4d0 2>;
-						#address-cells = <0>;
-						#interrupt-cells = <2>;
-						compatible = "chrp,iic";
-						interrupts = <0 1>;
-						interrupt-parent = <&mpic>;
-					};
-
-					rtc@70 {
-						compatible = "pnpPNP,b00";
-						reg = <1 70 2>;
-					};
+					compatible = "chrp,iic";
+					interrupts = <0 1>;
+					interrupt-parent = <&mpic>;
 				};
-			};
-		};
 
-		pci@9000 {
-			interrupt-map-mask = <f800 0 0 7>;
-			interrupt-map = <
-
-				/* IDSEL 0x15 */
-				a800 0 0 1 &mpic b 1
-				a800 0 0 2 &mpic 1 1
-				a800 0 0 3 &mpic 2 1
-				a800 0 0 4 &mpic 3 1>;
-
-			interrupt-parent = <&mpic>;
-			interrupts = <19 2>;
-			bus-range = <0 0>;
-			ranges = <02000000 0 90000000 90000000 0 10000000
-				  01000000 0 00000000 e2800000 0 00800000>;
-			clock-frequency = <3f940aa>;
-			#interrupt-cells = <1>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			reg = <9000 1000>;
-			compatible = "fsl,mpc8540-pci";
-			device_type = "pci";
+				rtc@70 {
+					compatible = "pnpPNP,b00";
+					reg = <1 70 2>;
+				};
+			};
 		};
-		/* PCI Express */
-		pcie@a000 {
-			interrupt-map-mask = <f800 0 0 7>;
-			interrupt-map = <
+	};
 
-				/* IDSEL 0x0 (PEX) */
-				00000 0 0 1 &mpic 0 1
-				00000 0 0 2 &mpic 1 1
-				00000 0 0 3 &mpic 2 1
-				00000 0 0 4 &mpic 3 1>;
+	pci@e0009000 {
+		interrupt-map-mask = <f800 0 0 7>;
+		interrupt-map = <
+
+			/* IDSEL 0x15 */
+			a800 0 0 1 &mpic b 1
+			a800 0 0 2 &mpic 1 1
+			a800 0 0 3 &mpic 2 1
+			a800 0 0 4 &mpic 3 1>;
+
+		interrupt-parent = <&mpic>;
+		interrupts = <19 2>;
+		bus-range = <0 0>;
+		ranges = <02000000 0 90000000 90000000 0 10000000
+			  01000000 0 00000000 e2800000 0 00800000>;
+		clock-frequency = <3f940aa>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <e0009000 1000>;
+		compatible = "fsl,mpc8540-pci";
+		device_type = "pci";
+	};
 
-			interrupt-parent = <&mpic>;
-			interrupts = <1a 2>;
-			bus-range = <0 ff>;
-			ranges = <02000000 0 a0000000 a0000000 0 20000000
-				  01000000 0 00000000 e3000000 0 08000000>;
-			clock-frequency = <1fca055>;
-			#interrupt-cells = <1>;
+	pcie@e000a000 {
+		interrupt-map-mask = <f800 0 0 7>;
+		interrupt-map = <
+
+			/* IDSEL 0x0 (PEX) */
+			00000 0 0 1 &mpic 0 1
+			00000 0 0 2 &mpic 1 1
+			00000 0 0 3 &mpic 2 1
+			00000 0 0 4 &mpic 3 1>;
+
+		interrupt-parent = <&mpic>;
+		interrupts = <1a 2>;
+		bus-range = <0 ff>;
+		ranges = <02000000 0 a0000000 a0000000 0 20000000
+			  01000000 0 00000000 e3000000 0 08000000>;
+		clock-frequency = <1fca055>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <e000a000 1000>;
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		pcie@0 {
+			reg = <0 0 0 0 0>;
 			#size-cells = <2>;
 			#address-cells = <3>;
-			reg = <a000 1000>;
-			compatible = "fsl,mpc8548-pcie";
 			device_type = "pci";
-		};
+			ranges = <02000000 0 a0000000
+				  02000000 0 a0000000
+				  0 20000000
 
-		mpic: pic@40000 {
-			clock-frequency = <0>;
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			reg = <40000 40000>;
-			compatible = "chrp,open-pic";
-			device_type = "open-pic";
-                        big-endian;
+				  01000000 0 00000000
+				  01000000 0 00000000
+				  0 08000000>;
 		};
 	};
 };