powerpc/83xx: rename and update kmeter1

Beside the MPC 8360 based board kmeter1 other km83xx boards
from keymile will follow. Therefore the board specific naming
kmeter1 for functions and files were replaced with km83xx.
Additionally some updates were made:
    - update defconfig for 2.6.38
    - rework flash partitioning in dts file
    - add gpio controller for qe_pio_c in dts

Signed-off-by: Holger Brunck <holger.brunck@keymile.com>
Acked-by: Heiko Schocher <hs@denx.de>
CC: Benjamin Herrenschmidt <benh@kernel.crashing.org>
CC: Heiko Schocher <hs@denx.de>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

1 files changed, 37 insertions, 32 deletions

diff --git a/arch/powerpc/boot/dts/kmeter1.dts b/arch/powerpc/boot/dts/kmeter1.dts
index d8b5d12fb66..d16bae1230f 100644
--- a/arch/powerpc/boot/dts/kmeter1.dts
+++ b/arch/powerpc/boot/dts/kmeter1.dts
@@ -1,7 +1,7 @@
 /*
  * Keymile KMETER1 Device Tree Source
  *
- * 2008 DENX Software Engineering GmbH
+ * 2008-2011 DENX Software Engineering GmbH
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -70,11 +70,11 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			cell-index = <0>;
-			compatible = "fsl-i2c";
+			compatible = "fsl,mpc8313-i2c","fsl-i2c";
 			reg = <0x3000 0x100>;
 			interrupts = <14 0x8>;
 			interrupt-parent = <&ipic>;
-			dfsrr;
+			clock-frequency = <400000>;
 		};
 
 		serial0: serial@4500 {
@@ -137,6 +137,13 @@
 			compatible = "fsl,mpc8360-par_io";
 			num-ports = <7>;
 
+			qe_pio_c: gpio-controller@30 {
+				#gpio-cells = <2>;
+				compatible = "fsl,mpc8360-qe-pario-bank",
+					     "fsl,mpc8323-qe-pario-bank";
+				reg = <0x1430 0x18>;
+				gpio-controller;
+			};
 			pio_ucc1: ucc_pin@0 {
 				reg = <0>;
 
@@ -472,7 +479,17 @@
 				#address-cells = <0>;
 				#interrupt-cells = <1>;
 				reg = <0x80 0x80>;
-				interrupts = <32 8 33 8>;
+				big-endian;
+				interrupts = <
+					32 0x8
+					33 0x8
+					34 0x8
+					35 0x8
+					40 0x8
+					41 0x8
+					42 0x8
+					43 0x8
+				>;
 				interrupt-parent = <&ipic>;
 			};
 		};
@@ -484,43 +501,31 @@
 		compatible = "fsl,mpc8360-localbus", "fsl,pq2pro-localbus",
 			     "simple-bus";
 		reg = <0xe0005000 0xd8>;
-		ranges = <0 0 0xf0000000 0x04000000>;	/* Filled in by U-Boot */
+		ranges = <0 0 0xf0000000 0x04000000	/* LB 0 */
+			  1 0 0xe8000000 0x01000000	/* LB 1 */
+			  3 0 0xa0000000 0x10000000>;	/* LB 3 */
 
-		flash@f0000000,0 {
+		flash@0,0 {
 			compatible = "cfi-flash";
-			/*
-			 * The Intel P30 chip has 2 non-identical chips on
-			 * one die, so we need to define 2 separate regions
-			 * that are scanned by physmap_of independantly.
-			 */
-			reg = <0 0x00000000 0x02000000
-			       0 0x02000000 0x02000000>;	/* Filled in by U-Boot */
-			bank-width = <2>;
+			reg = <0 0 0x04000000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
-			partition@0 {
+			bank-width = <2>;
+			partition@0 { /* 768KB */
 				label = "u-boot";
-				reg = <0 0x40000>;
+				reg = <0 0xC0000>;
 			};
-			partition@40000 {
+			partition@c0000 { /* 128KB */
 				label = "env";
-				reg = <0x40000 0x40000>;
-			};
-			partition@80000 {
-				label = "dtb";
-				reg = <0x80000 0x20000>;
-			};
-			partition@a0000 {
-				label = "kernel";
-				reg = <0xa0000 0x300000>;
+				reg = <0xC0000 0x20000>;
 			};
-			partition@3a0000 {
-				label = "ramdisk";
-				reg = <0x3a0000 0x800000>;
+			partition@e0000 { /* 128KB */
+				label = "envred";
+				reg = <0xE0000 0x20000>;
 			};
-			partition@ba0000 {
-				label = "user";
-				reg = <0xba0000 0x3460000>;
+			partition@100000 { /* 64512KB */
+				label = "ubi0";
+				reg = <0x100000 0x3F00000>;
 			};
 		};
 	};