powerpc/5200: dts: rename nodes to prepare for refactoring dts files

This patch renames nodes in dts fils for MPC5200b files to prepare for
refactoring of these files later. When refactoring it will be easier to verify
the results if the node names aren't changing at the same time.

Signed-off-by: John Bonesio <bones@secretlab.ca>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

9 files changed, 26 insertions, 26 deletions

diff --git a/arch/powerpc/boot/dts/cm5200.dts b/arch/powerpc/boot/dts/cm5200.dts
index dd3860846f1..9369dcd00a5 100644
--- a/arch/powerpc/boot/dts/cm5200.dts
+++ b/arch/powerpc/boot/dts/cm5200.dts
@@ -160,25 +160,25 @@
 			reg = <0x1f00 0x100>;
 		};
 
-		serial@2000 {		// PSC1
+		psc@2000 {		// PSC1
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
 			reg = <0x2000 0x100>;
 			interrupts = <2 1 0>;
 		};
 
-		serial@2200 {		// PSC2
+		psc@2200 {		// PSC2
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
 			reg = <0x2200 0x100>;
 			interrupts = <2 2 0>;
 		};
 
-		serial@2400 {		// PSC3
+		psc@2400 {		// PSC3
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
 			reg = <0x2400 0x100>;
 			interrupts = <2 3 0>;
 		};
 
-		serial@2c00 {		// PSC6
+		psc@2c00 {		// PSC6
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
 			reg = <0x2c00 0x100>;
 			interrupts = <2 4 0>;
diff --git a/arch/powerpc/boot/dts/digsy_mtc.dts b/arch/powerpc/boot/dts/digsy_mtc.dts
index 8e9be6bfe23..f0592de71bb 100644
--- a/arch/powerpc/boot/dts/digsy_mtc.dts
+++ b/arch/powerpc/boot/dts/digsy_mtc.dts
@@ -155,13 +155,13 @@
 			reg = <0x1f00 0x100>;
 		};
 
-		serial@2600 {		// PSC4
+		psc@2600 {		// PSC4
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
 			reg = <0x2600 0x100>;
 			interrupts = <2 11 0>;
 		};
 
-		serial@2800 {		// PSC5
+		psc@2800 {		// PSC5
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
 			reg = <0x2800 0x100>;
 			interrupts = <2 12 0>;
@@ -217,7 +217,7 @@
 		};
 	};
 
-	lpb {
+	localbus {
 		compatible = "fsl,mpc5200b-lpb","simple-bus";
 		#address-cells = <2>;
 		#size-cells = <1>;
diff --git a/arch/powerpc/boot/dts/lite5200b.dts b/arch/powerpc/boot/dts/lite5200b.dts
index 59702ace900..a74b7908405 100644
--- a/arch/powerpc/boot/dts/lite5200b.dts
+++ b/arch/powerpc/boot/dts/lite5200b.dts
@@ -172,7 +172,7 @@
 			reg = <0x1f00 0x100>;
 		};
 
-		serial@2000 {		// PSC1
+		psc@2000 {		// PSC1
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
 			cell-index = <0>;
 			reg = <0x2000 0x100>;
diff --git a/arch/powerpc/boot/dts/media5200.dts b/arch/powerpc/boot/dts/media5200.dts
index 0c3902bc5b6..a70ef680f30 100644
--- a/arch/powerpc/boot/dts/media5200.dts
+++ b/arch/powerpc/boot/dts/media5200.dts
@@ -183,7 +183,7 @@
 		};
 
 		// PSC6 in uart mode
-		console: serial@2c00 {		// PSC6
+		console: psc@2c00 {		// PSC6
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
 			cell-index = <5>;
 			port-number = <0>;  // Logical port assignment
diff --git a/arch/powerpc/boot/dts/motionpro.dts b/arch/powerpc/boot/dts/motionpro.dts
index 6ca4fc144a3..f6261ea0972 100644
--- a/arch/powerpc/boot/dts/motionpro.dts
+++ b/arch/powerpc/boot/dts/motionpro.dts
@@ -100,7 +100,7 @@
 			interrupts = <1 14 0>;
 		};
 
-		motionpro-led@660 {	// Motion-PRO status LED
+		timer@660 {	// Motion-PRO status LED
 			compatible = "promess,motionpro-led";
 			label = "motionpro-statusled";
 			reg = <0x660 0x10>;
@@ -108,7 +108,7 @@
 			blink-delay = <100>; // 100 msec
 		};
 
-		motionpro-led@670 {	// Motion-PRO ready LED
+		timer@670 {	// Motion-PRO ready LED
 			compatible = "promess,motionpro-led";
 			label = "motionpro-readyled";
 			reg = <0x670 0x10>;
@@ -169,14 +169,14 @@
 			reg = <0x1f00 0x100>;
 		};
 
-		serial@2000 {		// PSC1
+		psc@2000 {		// PSC1
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
 			reg = <0x2000 0x100>;
 			interrupts = <2 1 0>;
 		};
 
 		// PSC2 in spi master mode 
-		spi@2200 {		// PSC2
+		psc@2200 {		// PSC2
 			compatible = "fsl,mpc5200b-psc-spi","fsl,mpc5200-psc-spi";
 			cell-index = <1>;
 			reg = <0x2200 0x100>;
@@ -184,7 +184,7 @@
 		};
 
 		// PSC5 in uart mode
-		serial@2800 {		// PSC5
+		psc@2800 {		// PSC5
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
 			reg = <0x2800 0x100>;
 			interrupts = <2 12 0>;
diff --git a/arch/powerpc/boot/dts/mucmc52.dts b/arch/powerpc/boot/dts/mucmc52.dts
index b72a7581d79..8dc212d9238 100644
--- a/arch/powerpc/boot/dts/mucmc52.dts
+++ b/arch/powerpc/boot/dts/mucmc52.dts
@@ -126,19 +126,19 @@
 			reg = <0x1f00 0x100>;
 		};
 
-		serial@2000 { /* PSC1 in UART mode */
+		psc@2000 { /* PSC1 in UART mode */
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
 			reg = <0x2000 0x100>;
 			interrupts = <2 1 0>;
 		};
 
-		serial@2200 { /* PSC2 in UART mode */
+		psc@2200 { /* PSC2 in UART mode */
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
 			reg = <0x2200 0x100>;
 			interrupts = <2 2 0>;
 		};
 
-		serial@2c00 { /* PSC6 in UART mode */
+		psc@2c00 { /* PSC6 in UART mode */
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
 			reg = <0x2c00 0x100>;
 			interrupts = <2 4 0>;
diff --git a/arch/powerpc/boot/dts/pcm030.dts b/arch/powerpc/boot/dts/pcm030.dts
index e7c36bc88fa..34ab3bbcf99 100644
--- a/arch/powerpc/boot/dts/pcm030.dts
+++ b/arch/powerpc/boot/dts/pcm030.dts
@@ -185,7 +185,7 @@
 			reg = <0x1f00 0x100>;
 		};
 
-		ac97@2000 { /* PSC1 in ac97 mode */
+		psc@2000 { /* PSC1 in ac97 mode */
 			compatible = "mpc5200b-psc-ac97","fsl,mpc5200b-psc-ac97";
 			cell-index = <0>;
 			reg = <0x2000 0x100>;
@@ -194,7 +194,7 @@
 
 		/* PSC2 port is used by CAN1/2 */
 
-		serial@2400 { /* PSC3 in UART mode */
+		psc@2400 { /* PSC3 in UART mode */
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
 			cell-index = <2>;
 			reg = <0x2400 0x100>;
@@ -205,7 +205,7 @@
 
 		/* PSC5 is ??? */
 
-		serial@2c00 { /* PSC6 in UART mode */
+		psc@2c00 { /* PSC6 in UART mode */
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
 			cell-index = <5>;
 			reg = <0x2c00 0x100>;
diff --git a/arch/powerpc/boot/dts/pcm032.dts b/arch/powerpc/boot/dts/pcm032.dts
index e175e2c601b..29fde83b99b 100644
--- a/arch/powerpc/boot/dts/pcm032.dts
+++ b/arch/powerpc/boot/dts/pcm032.dts
@@ -185,7 +185,7 @@
 			reg = <0x1f00 0x100>;
 		};
 
-		ac97@2000 {	/* PSC1 is ac97 */
+		psc@2000 {	/* PSC1 is ac97 */
 			compatible = "fsl,mpc5200b-psc-ac97","fsl,mpc5200-psc-ac97";
 			cell-index = <0>;
 			reg = <0x2000 0x100>;
@@ -194,7 +194,7 @@
 
 		/* PSC2 port is used by CAN1/2 */
 
-		serial@2400 { /* PSC3 in UART mode */
+		psc@2400 { /* PSC3 in UART mode */
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
 			cell-index = <2>;
 			reg = <0x2400 0x100>;
@@ -205,7 +205,7 @@
 
 		/* PSC5 is ??? */
 
-		serial@2c00 { /* PSC6 in UART mode */
+		psc@2c00 { /* PSC6 in UART mode */
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
 			cell-index = <5>;
 			reg = <0x2c00 0x100>;
diff --git a/arch/powerpc/boot/dts/uc101.dts b/arch/powerpc/boot/dts/uc101.dts
index 019264c6290..e00441a3e5a 100644
--- a/arch/powerpc/boot/dts/uc101.dts
+++ b/arch/powerpc/boot/dts/uc101.dts
@@ -158,19 +158,19 @@
 			reg = <0x1f00 0x100>;
 		};
 
-		serial@2000 { /* PSC1 in UART mode */
+		psc@2000 { /* PSC1 in UART mode */
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
 			reg = <0x2000 0x100>;
 			interrupts = <2 1 0>;
 		};
 
-		serial@2200 { /* PSC2 in UART mode */
+		psc@2200 { /* PSC2 in UART mode */
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
 			reg = <0x2200 0x100>;
 			interrupts = <2 2 0>;
 		};
 
-		serial@2c00 {		/* PSC6 in UART mode */
+		psc@2c00 {		/* PSC6 in UART mode */
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
 			reg = <0x2c00 0x100>;
 			interrupts = <2 4 0>;