Merge remote-tracking branch 'agust/next' into next

<<
Please pull mpc5xxx patches for v3.9. The bestcomm driver is
moved to drivers/dma (so it will be usable for ColdFire).
mpc5121 now provides common dtsi file and existing mpc5121 device
trees use it. There are some minor clock init and sparse fixes
and updates for various 5200 device tree files from Grant. Some
fixes for bugs in the mpc5121 DIU driver are also included here
(Andrew Morton suggested to push them via my mpc5xxx tree).
>>

16 files changed, 586 insertions, 769 deletions

diff --git a/arch/powerpc/boot/dts/a3m071.dts b/arch/powerpc/boot/dts/a3m071.dts
index 877a28cb77e..bf81b8f9704 100644
--- a/arch/powerpc/boot/dts/a3m071.dts
+++ b/arch/powerpc/boot/dts/a3m071.dts
@@ -17,6 +17,8 @@
 
 /include/ "mpc5200b.dtsi"
 
+&gpt0 { fsl,has-wdt; };
+
 / {
 	model = "anonymous,a3m071";
 	compatible = "anonymous,a3m071";
@@ -30,10 +32,6 @@
 		bus-frequency = <0>; /* From boot loader */
 		system-frequency = <0>; /* From boot loader */
 
-		timer@600 {
-			fsl,has-wdt;
-		};
-
 		spi@f00 {
 			status = "disabled";
 		};
diff --git a/arch/powerpc/boot/dts/a4m072.dts b/arch/powerpc/boot/dts/a4m072.dts
index fabe7b7d5f1..1f02034c7e9 100644
--- a/arch/powerpc/boot/dts/a4m072.dts
+++ b/arch/powerpc/boot/dts/a4m072.dts
@@ -15,6 +15,11 @@
 
 /include/ "mpc5200b.dtsi"
 
+&gpt0 { fsl,has-wdt; };
+&gpt3 { gpio-controller; };
+&gpt4 { gpio-controller; };
+&gpt5 { gpio-controller; };
+
 / {
 	model = "anonymous,a4m072";
 	compatible = "anonymous,a4m072";
@@ -34,28 +39,6 @@
 			fsl,init-fd-counters = <0x3333>;
 		};
 
-		timer@600 {
-			fsl,has-wdt;
-		};
-
-		gpt3: timer@630 { /* General Purpose Timer in GPIO mode */
-			compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpt4: timer@640 { /* General Purpose Timer in GPIO mode */
-			compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpt5: timer@650 { /* General Purpose Timer in GPIO mode */
-			compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
 		spi@f00 {
 			status = "disabled";
 		};
diff --git a/arch/powerpc/boot/dts/cm5200.dts b/arch/powerpc/boot/dts/cm5200.dts
index ad3a4f4a2b0..fb580dd84dd 100644
--- a/arch/powerpc/boot/dts/cm5200.dts
+++ b/arch/powerpc/boot/dts/cm5200.dts
@@ -12,15 +12,13 @@
 
 /include/ "mpc5200b.dtsi"
 
+&gpt0 { fsl,has-wdt; };
+
 / {
 	model = "schindler,cm5200";
 	compatible = "schindler,cm5200";
 
 	soc5200@f0000000 {
-		timer@600 {	// General Purpose Timer
-			fsl,has-wdt;
-		};
-
 		can@900 {
 			status = "disabled";
 		};
diff --git a/arch/powerpc/boot/dts/digsy_mtc.dts b/arch/powerpc/boot/dts/digsy_mtc.dts
index a7511f2d844..955bff629df 100644
--- a/arch/powerpc/boot/dts/digsy_mtc.dts
+++ b/arch/powerpc/boot/dts/digsy_mtc.dts
@@ -13,6 +13,9 @@
 
 /include/ "mpc5200b.dtsi"
 
+&gpt0 { gpio-controller; fsl,has-wdt; };
+&gpt1 { gpio-controller; };
+
 / {
 	model = "intercontrol,digsy-mtc";
 	compatible = "intercontrol,digsy-mtc";
@@ -22,17 +25,6 @@
 	};
 
 	soc5200@f0000000 {
-		timer@600 {	// General Purpose Timer
-			#gpio-cells = <2>;
-			fsl,has-wdt;
-			gpio-controller;
-		};
-
-		timer@610 {
-			#gpio-cells = <2>;
-			gpio-controller;
-		};
-
 		rtc@800 {
 			status = "disabled";
 		};
diff --git a/arch/powerpc/boot/dts/lite5200b.dts b/arch/powerpc/boot/dts/lite5200b.dts
index fb288bb882b..5abb46c5cc9 100644
--- a/arch/powerpc/boot/dts/lite5200b.dts
+++ b/arch/powerpc/boot/dts/lite5200b.dts
@@ -12,19 +12,34 @@
 
 /include/ "mpc5200b.dtsi"
 
+&gpt0 { fsl,has-wdt; };
+&gpt2 { gpio-controller; };
+&gpt3 { gpio-controller; };
+
 / {
 	model = "fsl,lite5200b";
 	compatible = "fsl,lite5200b";
 
+	leds {
+		compatible = "gpio-leds";
+		tmr2 {
+			gpios = <&gpt2 0 1>;
+		};
+		tmr3 {
+			gpios = <&gpt3 0 1>;
+			linux,default-trigger = "heartbeat";
+		};
+		led1 { gpios = <&gpio_wkup 2 1>; };
+		led2 { gpios = <&gpio_simple 3 1>; };
+		led3 { gpios = <&gpio_wkup 3 1>; };
+		led4 { gpios = <&gpio_simple 2 1>; };
+	};
+
 	memory {
 		reg = <0x00000000 0x10000000>;	// 256MB
 	};
 
 	soc5200@f0000000 {
-		timer@600 {	// General Purpose Timer
-			fsl,has-wdt;
-		};
-
 		psc@2000 {		// PSC1
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
 			cell-index = <0>;
diff --git a/arch/powerpc/boot/dts/media5200.dts b/arch/powerpc/boot/dts/media5200.dts
index 48d72f38e5e..b5413cb85f1 100644
--- a/arch/powerpc/boot/dts/media5200.dts
+++ b/arch/powerpc/boot/dts/media5200.dts
@@ -13,6 +13,8 @@
 
 /include/ "mpc5200b.dtsi"
 
+&gpt0 { fsl,has-wdt; };
+
 / {
 	model = "fsl,media5200";
 	compatible = "fsl,media5200";
@@ -41,10 +43,6 @@
 	soc5200@f0000000 {
 		bus-frequency = <132000000>;// 132 MHz
 
-		timer@600 {	// General Purpose Timer
-			fsl,has-wdt;
-		};
-
 		psc@2000 {	// PSC1
 			status = "disabled";
 		};
diff --git a/arch/powerpc/boot/dts/motionpro.dts b/arch/powerpc/boot/dts/motionpro.dts
index 0b78e89ac69..bbabd97492a 100644
--- a/arch/powerpc/boot/dts/motionpro.dts
+++ b/arch/powerpc/boot/dts/motionpro.dts
@@ -12,26 +12,22 @@
 
 /include/ "mpc5200b.dtsi"
 
+&gpt0 { fsl,has-wdt; };
+&gpt6 { // Motion-PRO status LED
+	compatible = "promess,motionpro-led";
+	label = "motionpro-statusled";
+	blink-delay = <100>; // 100 msec
+};
+&gpt7 { // Motion-PRO ready LED
+	compatible = "promess,motionpro-led";
+	label = "motionpro-readyled";
+};
+
 / {
 	model = "promess,motionpro";
 	compatible = "promess,motionpro";
 
 	soc5200@f0000000 {
-		timer@600 {	// General Purpose Timer
-			fsl,has-wdt;
-		};
-
-		timer@660 {	// Motion-PRO status LED
-			compatible = "promess,motionpro-led";
-			label = "motionpro-statusled";
-			blink-delay = <100>; // 100 msec
-		};
-
-		timer@670 {	// Motion-PRO ready LED
-			compatible = "promess,motionpro-led";
-			label = "motionpro-readyled";
-		};
-
 		can@900 {
 			status = "disabled";
 		};
diff --git a/arch/powerpc/boot/dts/mpc5121.dtsi b/arch/powerpc/boot/dts/mpc5121.dtsi
new file mode 100644
index 00000000000..723e292b6b4
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc5121.dtsi
@@ -0,0 +1,410 @@
+/*
+ * base MPC5121 Device Tree Source
+ *
+ * Copyright 2007-2008 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "mpc5121";
+	compatible = "fsl,mpc5121";
+	#address-cells = <1>;
+	#size-cells = <1>;
+        interrupt-parent = <&ipic>;
+
+	aliases {
+		ethernet0 = &eth0;
+		pci = &pci;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,5121@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <0x20>;	/* 32 bytes */
+			i-cache-line-size = <0x20>;	/* 32 bytes */
+			d-cache-size = <0x8000>;	/* L1, 32K */
+			i-cache-size = <0x8000>;	/* L1, 32K */
+			timebase-frequency = <49500000>;/* 49.5 MHz (csb/4) */
+			bus-frequency = <198000000>;	/* 198 MHz csb bus */
+			clock-frequency = <396000000>;	/* 396 MHz ppc core */
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;	/* 256MB at 0 */
+	};
+
+	mbx@20000000 {
+		compatible = "fsl,mpc5121-mbx";
+		reg = <0x20000000 0x4000>;
+		interrupts = <66 0x8>;
+	};
+
+	sram@30000000 {
+		compatible = "fsl,mpc5121-sram";
+		reg = <0x30000000 0x20000>;	/* 128K at 0x30000000 */
+	};
+
+	nfc@40000000 {
+		compatible = "fsl,mpc5121-nfc";
+		reg = <0x40000000 0x100000>;	/* 1M at 0x40000000 */
+		interrupts = <6 8>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+
+	localbus@80000020 {
+		compatible = "fsl,mpc5121-localbus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		reg = <0x80000020 0x40>;
+		interrupts = <7 0x8>;
+		ranges = <0x0 0x0 0xfc000000 0x04000000>;
+	};
+
+	soc@80000000 {
+		compatible = "fsl,mpc5121-immr";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		#interrupt-cells = <2>;
+		ranges = <0x0 0x80000000 0x400000>;
+		reg = <0x80000000 0x400000>;
+		bus-frequency = <66000000>;	/* 66 MHz ips bus */
+
+
+		/*
+		 * IPIC
+		 * interrupts cell = <intr #, sense>
+		 * sense values match linux IORESOURCE_IRQ_* defines:
+		 * sense == 8: Level, low assertion
+		 * sense == 2: Edge, high-to-low change
+		 */
+		ipic: interrupt-controller@c00 {
+			compatible = "fsl,mpc5121-ipic", "fsl,ipic";
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0xc00 0x100>;
+		};
+
+		/* Watchdog timer */
+		wdt@900 {
+			compatible = "fsl,mpc5121-wdt";
+			reg = <0x900 0x100>;
+		};
+
+		/* Real time clock */
+		rtc@a00 {
+			compatible = "fsl,mpc5121-rtc";
+			reg = <0xa00 0x100>;
+			interrupts = <79 0x8 80 0x8>;
+		};
+
+		/* Reset module */
+		reset@e00 {
+			compatible = "fsl,mpc5121-reset";
+			reg = <0xe00 0x100>;
+		};
+
+		/* Clock control */
+		clock@f00 {
+			compatible = "fsl,mpc5121-clock";
+			reg = <0xf00 0x100>;
+		};
+
+		/* Power Management Controller */
+		pmc@1000{
+			compatible = "fsl,mpc5121-pmc";
+			reg = <0x1000 0x100>;
+			interrupts = <83 0x8>;
+		};
+
+		gpio@1100 {
+			compatible = "fsl,mpc5121-gpio";
+			reg = <0x1100 0x100>;
+			interrupts = <78 0x8>;
+		};
+
+		can@1300 {
+			compatible = "fsl,mpc5121-mscan";
+			reg = <0x1300 0x80>;
+			interrupts = <12 0x8>;
+		};
+
+		can@1380 {
+			compatible = "fsl,mpc5121-mscan";
+			reg = <0x1380 0x80>;
+			interrupts = <13 0x8>;
+		};
+
+		sdhc@1500 {
+			compatible = "fsl,mpc5121-sdhc";
+			reg = <0x1500 0x100>;
+			interrupts = <8 0x8>;
+		};
+
+		i2c@1700 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5121-i2c", "fsl-i2c";
+			reg = <0x1700 0x20>;
+			interrupts = <9 0x8>;
+		};
+
+		i2c@1720 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5121-i2c", "fsl-i2c";
+			reg = <0x1720 0x20>;
+			interrupts = <10 0x8>;
+		};
+
+		i2c@1740 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5121-i2c", "fsl-i2c";
+			reg = <0x1740 0x20>;
+			interrupts = <11 0x8>;
+		};
+
+		i2ccontrol@1760 {
+			compatible = "fsl,mpc5121-i2c-ctrl";
+			reg = <0x1760 0x8>;
+		};
+
+		axe@2000 {
+			compatible = "fsl,mpc5121-axe";
+			reg = <0x2000 0x100>;
+			interrupts = <42 0x8>;
+		};
+
+		display@2100 {
+			compatible = "fsl,mpc5121-diu";
+			reg = <0x2100 0x100>;
+			interrupts = <64 0x8>;
+		};
+
+		can@2300 {
+			compatible = "fsl,mpc5121-mscan";
+			reg = <0x2300 0x80>;
+			interrupts = <90 0x8>;
+		};
+
+		can@2380 {
+			compatible = "fsl,mpc5121-mscan";
+			reg = <0x2380 0x80>;
+			interrupts = <91 0x8>;
+		};
+
+		viu@2400 {
+			compatible = "fsl,mpc5121-viu";
+			reg = <0x2400 0x400>;
+			interrupts = <67 0x8>;
+		};
+
+		mdio@2800 {
+			compatible = "fsl,mpc5121-fec-mdio";
+			reg = <0x2800 0x800>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		eth0: ethernet@2800 {
+			device_type = "network";
+			compatible = "fsl,mpc5121-fec";
+			reg = <0x2800 0x800>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <4 0x8>;
+		};
+
+		/* USB1 using external ULPI PHY */
+		usb@3000 {
+			compatible = "fsl,mpc5121-usb2-dr";
+			reg = <0x3000 0x600>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <43 0x8>;
+			dr_mode = "otg";
+			phy_type = "ulpi";
+		};
+
+		/* USB0 using internal UTMI PHY */
+		usb@4000 {
+			compatible = "fsl,mpc5121-usb2-dr";
+			reg = <0x4000 0x600>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <44 0x8>;
+			dr_mode = "otg";
+			phy_type = "utmi_wide";
+		};
+
+		/* IO control */
+		ioctl@a000 {
+			compatible = "fsl,mpc5121-ioctl";
+			reg = <0xA000 0x1000>;
+		};
+
+		/* LocalPlus controller */
+		lpc@10000 {
+			compatible = "fsl,mpc5121-lpc";
+			reg = <0x10000 0x200>;
+		};
+
+		pata@10200 {
+			compatible = "fsl,mpc5121-pata";
+			reg = <0x10200 0x100>;
+			interrupts = <5 0x8>;
+		};
+
+		/* 512x PSCs are not 52xx PSC compatible */
+
+		/* PSC0 */
+		psc@11000 {
+			compatible = "fsl,mpc5121-psc";
+			reg = <0x11000 0x100>;
+			interrupts = <40 0x8>;
+			fsl,rx-fifo-size = <16>;
+			fsl,tx-fifo-size = <16>;
+		};
+
+		/* PSC1 */
+		psc@11100 {
+			compatible = "fsl,mpc5121-psc";
+			reg = <0x11100 0x100>;
+			interrupts = <40 0x8>;
+			fsl,rx-fifo-size = <16>;
+			fsl,tx-fifo-size = <16>;
+		};
+
+		/* PSC2 */
+		psc@11200 {
+			compatible = "fsl,mpc5121-psc";
+			reg = <0x11200 0x100>;
+			interrupts = <40 0x8>;
+			fsl,rx-fifo-size = <16>;
+			fsl,tx-fifo-size = <16>;
+		};
+
+		/* PSC3 */
+		psc@11300 {
+			compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
+			reg = <0x11300 0x100>;
+			interrupts = <40 0x8>;
+			fsl,rx-fifo-size = <16>;
+			fsl,tx-fifo-size = <16>;
+		};
+
+		/* PSC4 */
+		psc@11400 {
+			compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
+			reg = <0x11400 0x100>;
+			interrupts = <40 0x8>;
+			fsl,rx-fifo-size = <16>;
+			fsl,tx-fifo-size = <16>;
+		};
+
+		/* PSC5 */
+		psc@11500 {
+			compatible = "fsl,mpc5121-psc";
+			reg = <0x11500 0x100>;
+			interrupts = <40 0x8>;
+			fsl,rx-fifo-size = <16>;
+			fsl,tx-fifo-size = <16>;
+		};
+
+		/* PSC6 */
+		psc@11600 {
+			compatible = "fsl,mpc5121-psc";
+			reg = <0x11600 0x100>;
+			interrupts = <40 0x8>;
+			fsl,rx-fifo-size = <16>;
+			fsl,tx-fifo-size = <16>;
+		};
+
+		/* PSC7 */
+		psc@11700 {
+			compatible = "fsl,mpc5121-psc";
+			reg = <0x11700 0x100>;
+			interrupts = <40 0x8>;
+			fsl,rx-fifo-size = <16>;
+			fsl,tx-fifo-size = <16>;
+		};
+
+		/* PSC8 */
+		psc@11800 {
+			compatible = "fsl,mpc5121-psc";
+			reg = <0x11800 0x100>;
+			interrupts = <40 0x8>;
+			fsl,rx-fifo-size = <16>;
+			fsl,tx-fifo-size = <16>;
+		};
+
+		/* PSC9 */
+		psc@11900 {
+			compatible = "fsl,mpc5121-psc";
+			reg = <0x11900 0x100>;
+			interrupts = <40 0x8>;
+			fsl,rx-fifo-size = <16>;
+			fsl,tx-fifo-size = <16>;
+		};
+
+		/* PSC10 */
+		psc@11a00 {
+			compatible = "fsl,mpc5121-psc";
+			reg = <0x11a00 0x100>;
+			interrupts = <40 0x8>;
+			fsl,rx-fifo-size = <16>;
+			fsl,tx-fifo-size = <16>;
+		};
+
+		/* PSC11 */
+		psc@11b00 {
+			compatible = "fsl,mpc5121-psc";
+			reg = <0x11b00 0x100>;
+			interrupts = <40 0x8>;
+			fsl,rx-fifo-size = <16>;
+			fsl,tx-fifo-size = <16>;
+		};
+
+		pscfifo@11f00 {
+			compatible = "fsl,mpc5121-psc-fifo";
+			reg = <0x11f00 0x100>;
+			interrupts = <40 0x8>;
+		};
+
+		dma@14000 {
+			compatible = "fsl,mpc5121-dma";
+			reg = <0x14000 0x1800>;
+			interrupts = <65 0x8>;
+		};
+	};
+
+	pci: pci@80008500 {
+		compatible = "fsl,mpc5121-pci";
+		device_type = "pci";
+		interrupts = <1 0x8>;
+		clock-frequency = <0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+
+		reg = <0x80008500 0x100	/* internal registers */
+		       0x80008300 0x8>;	/* config space access registers */
+		bus-range = <0x0 0x0>;
+		ranges = <0x42000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
+			  0x02000000 0x0 0xb0000000 0xb0000000 0x0 0x10000000
+			  0x01000000 0x0 0x00000000 0x84000000 0x0 0x01000000>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/mpc5121ads.dts b/arch/powerpc/boot/dts/mpc5121ads.dts
index c9ef6bbe26c..f269b1382ef 100644
--- a/arch/powerpc/boot/dts/mpc5121ads.dts
+++ b/arch/powerpc/boot/dts/mpc5121ads.dts
@@ -1,7 +1,7 @@
 /*
  * MPC5121E ADS Device Tree Source
  *
- * Copyright 2007,2008 Freescale Semiconductor Inc.
+ * Copyright 2007-2008 Freescale Semiconductor Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -9,74 +9,26 @@
  * option) any later version.
  */
 
-/dts-v1/;
+/include/ "mpc5121.dtsi"
 
 / {
 	model = "mpc5121ads";
 	compatible = "fsl,mpc5121ads";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		pci = &pci;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,5121@0 {
-			device_type = "cpu";
-			reg = <0>;
-			d-cache-line-size = <0x20>;	// 32 bytes
-			i-cache-line-size = <0x20>;	// 32 bytes
-			d-cache-size = <0x8000>;	// L1, 32K
-			i-cache-size = <0x8000>;	// L1, 32K
-			timebase-frequency = <49500000>;// 49.5 MHz (csb/4)
-			bus-frequency = <198000000>;	// 198 MHz csb bus
-			clock-frequency = <396000000>;	// 396 MHz ppc core
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x10000000>;	// 256MB at 0
-	};
-
-	mbx@20000000 {
-		compatible = "fsl,mpc5121-mbx";
-		reg = <0x20000000 0x4000>;
-		interrupts = <66 0x8>;
-		interrupt-parent = < &ipic >;
-	};
-
-	sram@30000000 {
-		compatible = "fsl,mpc5121-sram";
-		reg = <0x30000000 0x20000>;		// 128K at 0x30000000
-	};
 
 	nfc@40000000 {
-		compatible = "fsl,mpc5121-nfc";
-		reg = <0x40000000 0x100000>;	// 1M at 0x40000000
-		interrupts = <6 8>;
-		interrupt-parent = < &ipic >;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		// ADS has two Hynix 512MB Nand flash chips in a single
-		// stacked package.
+		/*
+		 * ADS has two Hynix 512MB Nand flash chips in a single
+		 * stacked package.
+		 */
 		chips = <2>;
+
 		nand@0 {
 			label = "nand";
-			reg = <0x00000000 0x40000000>;	// 512MB + 512MB
+			reg = <0x00000000 0x40000000>;	/* 512MB + 512MB */
 		};
 	};
 
 	localbus@80000020 {
-		compatible = "fsl,mpc5121-localbus";
-		#address-cells = <2>;
-		#size-cells = <1>;
-		reg = <0x80000020 0x40>;
-
 		ranges = <0x0 0x0 0xfc000000 0x04000000
 			  0x2 0x0 0x82000000 0x00008000>;
 
@@ -87,6 +39,7 @@
 			#size-cells = <1>;
 			bank-width = <4>;
 			device-width = <2>;
+
 			protected@0 {
 				label = "protected";
 				reg = <0x00000000 0x00040000>;  // first sector is protected
@@ -121,91 +74,18 @@
 			interrupt-controller;
 			#interrupt-cells = <2>;
 			reg = <0x2 0xa 0x5>;
-			interrupt-parent = < &ipic >;
-			// irq routing
-			//	all irqs but touch screen are routed to irq0 (ipic 48)
-			//	touch screen is statically routed to irq1 (ipic 17)
-			//	so don't use it here
+			/* irq routing:
+			 * all irqs but touch screen are routed to irq0 (ipic 48)
+			 * touch screen is statically routed to irq1 (ipic 17)
+			 * so don't use it here
+			 */
 			interrupts = <48 0x8>;
 		};
 	};
 
 	soc@80000000 {
-		compatible = "fsl,mpc5121-immr";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		#interrupt-cells = <2>;
-		ranges = <0x0 0x80000000 0x400000>;
-		reg = <0x80000000 0x400000>;
-		bus-frequency = <66000000>;	// 66 MHz ips bus
-
-
-		// IPIC
-		// interrupts cell = <intr #, sense>
-		// sense values match linux IORESOURCE_IRQ_* defines:
-		// sense == 8: Level, low assertion
-		// sense == 2: Edge, high-to-low change
-		//
-		ipic: interrupt-controller@c00 {
-			compatible = "fsl,mpc5121-ipic", "fsl,ipic";
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			reg = <0xc00 0x100>;
-		};
-
-		rtc@a00 {	// Real time clock
-			compatible = "fsl,mpc5121-rtc";
-			reg = <0xa00 0x100>;
-			interrupts = <79 0x8 80 0x8>;
-			interrupt-parent = < &ipic >;
-		};
-
-		reset@e00 {	// Reset module
-			compatible = "fsl,mpc5121-reset";
-			reg = <0xe00 0x100>;
-		};
-
-		clock@f00 {	// Clock control
-			compatible = "fsl,mpc5121-clock";
-			reg = <0xf00 0x100>;
-		};
-
-		pmc@1000{  //Power Management Controller
-			compatible = "fsl,mpc5121-pmc";
-			reg = <0x1000 0x100>;
-			interrupts = <83 0x2>;
-			interrupt-parent = < &ipic >;
-		};
-
-		gpio@1100 {
-			compatible = "fsl,mpc5121-gpio";
-			reg = <0x1100 0x100>;
-			interrupts = <78 0x8>;
-			interrupt-parent = < &ipic >;
-		};
-
-		can@1300 {
-			compatible = "fsl,mpc5121-mscan";
-			interrupts = <12 0x8>;
-			interrupt-parent = < &ipic >;
-			reg = <0x1300 0x80>;
-		};
-
-		can@1380 {
-			compatible = "fsl,mpc5121-mscan";
-			interrupts = <13 0x8>;
-			interrupt-parent = < &ipic >;
-			reg = <0x1380 0x80>;
-		};
 
 		i2c@1700 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,mpc5121-i2c", "fsl-i2c";
-			reg = <0x1700 0x20>;
-			interrupts = <9 0x8>;
-			interrupt-parent = < &ipic >;
 			fsl,preserve-clocking;
 
 			hwmon@4a {
@@ -224,196 +104,75 @@
 			};
 		};
 
-		i2c@1720 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,mpc5121-i2c", "fsl-i2c";
-			reg = <0x1720 0x20>;
-			interrupts = <10 0x8>;
-			interrupt-parent = < &ipic >;
-		};
-
-		i2c@1740 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,mpc5121-i2c", "fsl-i2c";
-			reg = <0x1740 0x20>;
-			interrupts = <11 0x8>;
-			interrupt-parent = < &ipic >;
+		eth0: ethernet@2800 {
+			phy-handle = <&phy0>;
 		};
 
-		i2ccontrol@1760 {
-			compatible = "fsl,mpc5121-i2c-ctrl";
-			reg = <0x1760 0x8>;
+		can@2300 {
+			status = "disabled";
 		};
 
-		axe@2000 {
-			compatible = "fsl,mpc5121-axe";
-			reg = <0x2000 0x100>;
-			interrupts = <42 0x8>;
-			interrupt-parent = < &ipic >;
+		can@2380 {
+			status = "disabled";
 		};
 
-		display@2100 {
-			compatible = "fsl,mpc5121-diu";
-			reg = <0x2100 0x100>;
-			interrupts = <64 0x8>;
-			interrupt-parent = < &ipic >;
+		viu@2400 {
+			status = "disabled";
 		};
 
 		mdio@2800 {
-			compatible = "fsl,mpc5121-fec-mdio";
-			reg = <0x2800 0x800>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			phy: ethernet-phy@0 {
+			phy0: ethernet-phy@0 {
 				reg = <1>;
-				device_type = "ethernet-phy";
 			};
 		};
 
-		ethernet@2800 {
-			device_type = "network";
-			compatible = "fsl,mpc5121-fec";
-			reg = <0x2800 0x800>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <4 0x8>;
-			interrupt-parent = < &ipic >;
-			phy-handle = < &phy >;
-			fsl,align-tx-packets = <4>;
+		/* mpc5121ads only uses USB0 */
+		usb@3000 {
+			status = "disabled";
 		};
 
-		// 5121e has two dr usb modules
-		// mpc5121_ads only uses USB0
-
-		// USB1 using external ULPI PHY
-		//usb@3000 {
-		//	compatible = "fsl,mpc5121-usb2-dr";
-		//	reg = <0x3000 0x1000>;
-		//	#address-cells = <1>;
-		//	#size-cells = <0>;
-		//	interrupt-parent = < &ipic >;
-		//	interrupts = <43 0x8>;
-		//	dr_mode = "otg";
-		//	phy_type = "ulpi";
-		//};
-
-		// USB0 using internal UTMI PHY
+		/* USB0 using internal UTMI PHY */
 		usb@4000 {
-			compatible = "fsl,mpc5121-usb2-dr";
-			reg = <0x4000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupt-parent = < &ipic >;
-			interrupts = <44 0x8>;
-			dr_mode = "otg";
-			phy_type = "utmi_wide";
+			dr_mode = "host";
 			fsl,invert-drvvbus;
 			fsl,invert-pwr-fault;
 		};
 
-		// IO control
-		ioctl@a000 {
-			compatible = "fsl,mpc5121-ioctl";
-			reg = <0xA000 0x1000>;
-		};
-
-		pata@10200 {
-			compatible = "fsl,mpc5121-pata";
-			reg = <0x10200 0x100>;
-			interrupts = <5 0x8>;
-			interrupt-parent = < &ipic >;
-		};
-
-		// 512x PSCs are not 52xx PSC compatible
-		// PSC3 serial port A aka ttyPSC0
-		serial@11300 {
-			device_type = "serial";
+		/* PSC3 serial port A aka ttyPSC0 */
+		psc@11300 {
 			compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
-			// Logical port assignment needed until driver
-			// learns to use aliases
-			port-number = <0>;
-			cell-index = <3>;
-			reg = <0x11300 0x100>;
-			interrupts = <40 0x8>;
-			interrupt-parent = < &ipic >;
-			rx-fifo-size = <16>;
-			tx-fifo-size = <16>;
 		};
 
-		// PSC4 serial port B aka ttyPSC1
-		serial@11400 {
-			device_type = "serial";
+		/* PSC4 serial port B aka ttyPSC1 */
+		psc@11400 {
 			compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
-			// Logical port assignment needed until driver
-			// learns to use aliases
-			port-number = <1>;
-			cell-index = <4>;
-			reg = <0x11400 0x100>;
-			interrupts = <40 0x8>;
-			interrupt-parent = < &ipic >;
-			rx-fifo-size = <16>;
-			tx-fifo-size = <16>;
 		};
 
-		// PSC5 in ac97 mode
-		ac97@11500 {
+		/* PSC5 in ac97 mode */
+		ac97: psc@11500 {
 			compatible = "fsl,mpc5121-psc-ac97", "fsl,mpc5121-psc";
-			cell-index = <5>;
-			reg = <0x11500 0x100>;
-			interrupts = <40 0x8>;
-			interrupt-parent = < &ipic >;
 			fsl,mode = "ac97-slave";
-			rx-fifo-size = <384>;
-			tx-fifo-size = <384>;
-		};
-
-		pscfifo@11f00 {
-			compatible = "fsl,mpc5121-psc-fifo";
-			reg = <0x11f00 0x100>;
-			interrupts = <40 0x8>;
-			interrupt-parent = < &ipic >;
+			fsl,rx-fifo-size = <384>;
+			fsl,tx-fifo-size = <384>;
 		};
-
-		dma@14000 {
-			compatible = "fsl,mpc5121-dma";
-			reg = <0x14000 0x1800>;
-			interrupts = <65 0x8>;
-			interrupt-parent = < &ipic >;
-		};
-
 	};
 
 	pci: pci@80008500 {
 		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
-				// IDSEL 0x15 - Slot 1 PCI
+				/* IDSEL 0x15 - Slot 1 PCI */
 				 0xa800 0x0 0x0 0x1 &cpld_pic 0x0 0x8
 				 0xa800 0x0 0x0 0x2 &cpld_pic 0x1 0x8
 				 0xa800 0x0 0x0 0x3 &cpld_pic 0x2 0x8
 				 0xa800 0x0 0x0 0x4 &cpld_pic 0x3 0x8
 
-				// IDSEL 0x16 - Slot 2 MiniPCI
+				/* IDSEL 0x16 - Slot 2 MiniPCI */
 				 0xb000 0x0 0x0 0x1 &cpld_pic 0x4 0x8
 				 0xb000 0x0 0x0 0x2 &cpld_pic 0x5 0x8
 
-				// IDSEL 0x17 - Slot 3 MiniPCI
+				/* IDSEL 0x17 - Slot 3 MiniPCI */
 				 0xb800 0x0 0x0 0x1 &cpld_pic 0x6 0x8
 				 0xb800 0x0 0x0 0x2 &cpld_pic 0x7 0x8
 				>;
-		interrupt-parent = < &ipic >;
-		interrupts = <1 0x8>;
-		bus-range = <0 0>;
-		ranges = <0x42000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
-			  0x02000000 0x0 0xb0000000 0xb0000000 0x0 0x10000000
-			  0x01000000 0x0 0x00000000 0x84000000 0x0 0x01000000>;
-		clock-frequency = <0>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0x80008500 0x100		/* internal registers */
-		       0x80008300 0x8>;		/* config space access registers */
-		compatible = "fsl,mpc5121-pci";
-		device_type = "pci";
 	};
 };
diff --git a/arch/powerpc/boot/dts/mpc5200b.dtsi b/arch/powerpc/boot/dts/mpc5200b.dtsi
index 39ed65a44c5..969b2200b2f 100644
--- a/arch/powerpc/boot/dts/mpc5200b.dtsi
+++ b/arch/powerpc/boot/dts/mpc5200b.dtsi
@@ -64,50 +64,59 @@
 			reg = <0x500 0x80>;
 		};
 
-		timer@600 {	// General Purpose Timer
+		gpt0: timer@600 {	// General Purpose Timer
 			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			#gpio-cells = <2>;  // Add 'gpio-controller;' to enable gpio mode
 			reg = <0x600 0x10>;
 			interrupts = <1 9 0>;
+			// add 'fsl,has-wdt' to enable watchdog
 		};
 
-		timer@610 {	// General Purpose Timer
+		gpt1: timer@610 {	// General Purpose Timer
 			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			#gpio-cells = <2>;  // Add 'gpio-controller;' to enable gpio mode
 			reg = <0x610 0x10>;
 			interrupts = <1 10 0>;
 		};
 
-		timer@620 {	// General Purpose Timer
+		gpt2: timer@620 {	// General Purpose Timer
 			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			#gpio-cells = <2>;  // Add 'gpio-controller;' to enable gpio mode
 			reg = <0x620 0x10>;
 			interrupts = <1 11 0>;
 		};
 
-		timer@630 {	// General Purpose Timer
+		gpt3: timer@630 {	// General Purpose Timer
 			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			#gpio-cells = <2>;  // Add 'gpio-controller;' to enable gpio mode
 			reg = <0x630 0x10>;
 			interrupts = <1 12 0>;
 		};
 
-		timer@640 {	// General Purpose Timer
+		gpt4: timer@640 {	// General Purpose Timer
 			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			#gpio-cells = <2>;  // Add 'gpio-controller;' to enable gpio mode
 			reg = <0x640 0x10>;
 			interrupts = <1 13 0>;
 		};
 
-		timer@650 {	// General Purpose Timer
+		gpt5: timer@650 {	// General Purpose Timer
 			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			#gpio-cells = <2>;  // Add 'gpio-controller;' to enable gpio mode
 			reg = <0x650 0x10>;
 			interrupts = <1 14 0>;
 		};
 
-		timer@660 {	// General Purpose Timer
+		gpt6: timer@660 {	// General Purpose Timer
 			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			#gpio-cells = <2>;  // Add 'gpio-controller;' to enable gpio mode
 			reg = <0x660 0x10>;
 			interrupts = <1 15 0>;
 		};
 
-		timer@670 {	// General Purpose Timer
+		gpt7: timer@670 {	// General Purpose Timer
 			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			#gpio-cells = <2>;  // Add 'gpio-controller;' to enable gpio mode
 			reg = <0x670 0x10>;
 			interrupts = <1 16 0>;
 		};
diff --git a/arch/powerpc/boot/dts/mucmc52.dts b/arch/powerpc/boot/dts/mucmc52.dts
index 21d34720fcc..d3a792bb5c1 100644
--- a/arch/powerpc/boot/dts/mucmc52.dts
+++ b/arch/powerpc/boot/dts/mucmc52.dts
@@ -13,47 +13,23 @@
 
 /include/ "mpc5200b.dtsi"
 
+/* Timer pins that need to be in GPIO mode */
+&gpt0 { gpio-controller; };
+&gpt1 { gpio-controller; };
+&gpt2 { gpio-controller; };
+&gpt3 { gpio-controller; };
+
+/* Disabled timers */
+&gpt4 { status = "disabled"; };
+&gpt5 { status = "disabled"; };
+&gpt6 { status = "disabled"; };
+&gpt7 { status = "disabled"; };
+
 / {
 	model = "manroland,mucmc52";
 	compatible = "manroland,mucmc52";
 
 	soc5200@f0000000 {
-		gpt0: timer@600 {	// GPT 0 in GPIO mode
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpt1: timer@610 {	// General Purpose Timer in GPIO mode
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpt2: timer@620 {	// General Purpose Timer in GPIO mode
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpt3: timer@630 {	// General Purpose Timer in GPIO mode
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		timer@640 {
-			status = "disabled";
-		};
-
-		timer@650 {
-			status = "disabled";
-		};
-
-		timer@660 {
-			status = "disabled";
-		};
-
-		timer@670 {
-			status = "disabled";
-		};
-
 		rtc@800 {
 			status = "disabled";
 		};
diff --git a/arch/powerpc/boot/dts/o2d.dtsi b/arch/powerpc/boot/dts/o2d.dtsi
index 24f66803929..cf073e693f2 100644
--- a/arch/powerpc/boot/dts/o2d.dtsi
+++ b/arch/powerpc/boot/dts/o2d.dtsi
@@ -12,6 +12,13 @@
 
 /include/ "mpc5200b.dtsi"
 
+&gpt0 {
+	gpio-controller;
+	fsl,has-wdt;
+	fsl,wdt-on-boot = <0>;
+};
+&gpt1 { gpio-controller; };
+
 / {
 	model = "ifm,o2d";
 	compatible = "ifm,o2d";
@@ -22,24 +29,6 @@
 
 	soc5200@f0000000 {
 
-		gpio_simple: gpio@b00 {
-		};
-
-		timer@600 {	// General Purpose Timer
-			#gpio-cells = <2>;
-			gpio-controller;
-			fsl,has-wdt;
-			fsl,wdt-on-boot = <0>;
-		};
-
-		timer@610 {
-			#gpio-cells = <2>;
-			gpio-controller;
-		};
-
-		timer7: timer@670 {
-		};
-
 		rtc@800 {
 			status = "disabled";
 		};
@@ -118,7 +107,7 @@
 		csi@3,0 {
 			compatible = "ifm,o2d-csi";
 			reg = <3 0 0x00100000>;
-			ifm,csi-clk-handle = <&timer7>;
+			ifm,csi-clk-handle = <&gpt7>;
 			gpios = <&gpio_simple 23 0	/* imag_capture */
 				 &gpio_simple 26 0	/* imag_reset */
 				 &gpio_simple 29 0>;	/* imag_master_en */
diff --git a/arch/powerpc/boot/dts/pcm030.dts b/arch/powerpc/boot/dts/pcm030.dts
index 96512c05803..192e66af000 100644
--- a/arch/powerpc/boot/dts/pcm030.dts
+++ b/arch/powerpc/boot/dts/pcm030.dts
@@ -14,51 +14,19 @@
 
 /include/ "mpc5200b.dtsi"
 
+&gpt0 { fsl,has-wdt; };
+&gpt2 { gpio-controller; };
+&gpt3 { gpio-controller; };
+&gpt4 { gpio-controller; };
+&gpt5 { gpio-controller; };
+&gpt6 { gpio-controller; };
+&gpt7 { gpio-controller; };
+
 / {
 	model = "phytec,pcm030";
 	compatible = "phytec,pcm030";
 
 	soc5200@f0000000 {
-		timer@600 {		// General Purpose Timer
-			fsl,has-wdt;
-		};
-
-		gpt2: timer@620 {	// General Purpose Timer in GPIO mode
-			compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpt3: timer@630 {	// General Purpose Timer in GPIO mode
-			compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpt4: timer@640 {	// General Purpose Timer in GPIO mode
-			compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpt5: timer@650 {	// General Purpose Timer in GPIO mode
-			compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpt6: timer@660 {	// General Purpose Timer in GPIO mode
-			compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpt7: timer@670 {	// General Purpose Timer in GPIO mode
-			compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
 		audioplatform: psc@2000 { /* PSC1 in ac97 mode */
 			compatible = "mpc5200b-psc-ac97","fsl,mpc5200b-psc-ac97";
 			cell-index = <0>;
diff --git a/arch/powerpc/boot/dts/pcm032.dts b/arch/powerpc/boot/dts/pcm032.dts
index 1dd478bfff9..96b139bf50e 100644
--- a/arch/powerpc/boot/dts/pcm032.dts
+++ b/arch/powerpc/boot/dts/pcm032.dts
@@ -14,6 +14,14 @@
 
 /include/ "mpc5200b.dtsi"
 
+&gpt0 { fsl,has-wdt; };
+&gpt2 { gpio-controller; };
+&gpt3 { gpio-controller; };
+&gpt4 { gpio-controller; };
+&gpt5 { gpio-controller; };
+&gpt6 { gpio-controller; };
+&gpt7 { gpio-controller; };
+
 / {
 	model = "phytec,pcm032";
 	compatible = "phytec,pcm032";
@@ -23,43 +31,6 @@
 	};
 
 	soc5200@f0000000 {
-		timer@600 {		// General Purpose Timer
-			fsl,has-wdt;
-		};
-
-		gpt2: timer@620 {	// General Purpose Timer in GPIO mode
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpt3: timer@630 {	// General Purpose Timer in GPIO mode
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpt4: timer@640 {	// General Purpose Timer in GPIO mode
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpt5: timer@650 {	// General Purpose Timer in GPIO mode
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpt6: timer@660 {	// General Purpose Timer in GPIO mode
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x660 0x10>;
-			interrupts = <1 15 0>;
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpt7: timer@670 {	// General Purpose Timer in GPIO mode
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
 		psc@2000 {	/* PSC1 is ac97 */
 			compatible = "fsl,mpc5200b-psc-ac97","fsl,mpc5200-psc-ac97";
 			cell-index = <0>;
diff --git a/arch/powerpc/boot/dts/pdm360ng.dts b/arch/powerpc/boot/dts/pdm360ng.dts
index 94dfa5c9a7f..0b069477838 100644
--- a/arch/powerpc/boot/dts/pdm360ng.dts
+++ b/arch/powerpc/boot/dts/pdm360ng.dts
@@ -13,7 +13,7 @@
  * option) any later version.
  */
 
-/dts-v1/;
+/include/ "mpc5121.dtsi"
 
 / {
 	model = "pdm360ng";
@@ -22,38 +22,12 @@
 	#size-cells = <1>;
 	interrupt-parent = <&ipic>;
 
-	aliases {
-		ethernet0 = &eth0;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,5121@0 {
-			device_type = "cpu";
-			reg = <0>;
-			d-cache-line-size = <0x20>;	// 32 bytes
-			i-cache-line-size = <0x20>;	// 32 bytes
-			d-cache-size = <0x8000>;	// L1, 32K
-			i-cache-size = <0x8000>;	// L1, 32K
-			timebase-frequency = <49500000>;// 49.5 MHz (csb/4)
-			bus-frequency = <198000000>;	// 198 MHz csb bus
-			clock-frequency = <396000000>;	// 396 MHz ppc core
-		};
-	};
-
 	memory {
 		device_type = "memory";
 		reg = <0x00000000 0x20000000>;	// 512MB at 0
 	};
 
 	nfc@40000000 {
-		compatible = "fsl,mpc5121-nfc";
-		reg = <0x40000000 0x100000>;
-		interrupts = <0x6 0x8>;
-		#address-cells = <0x1>;
-		#size-cells = <0x1>;
 		bank-width = <0x1>;
 		chips = <0x1>;
 
@@ -63,17 +37,7 @@
 		};
 	};
 
-	sram@50000000 {
-		compatible = "fsl,mpc5121-sram";
-		reg = <0x50000000 0x20000>;	// 128K at 0x50000000
-	};
-
 	localbus@80000020 {
-		compatible = "fsl,mpc5121-localbus";
-		#address-cells = <2>;
-		#size-cells = <1>;
-		reg = <0x80000020 0x40>;
-
 		ranges = <0x0 0x0 0xf0000000 0x10000000   /* Flash */
 			  0x2 0x0 0x50040000 0x00020000>; /* CS2: MRAM */
 
@@ -129,74 +93,8 @@
 	};
 
 	soc@80000000 {
-		compatible = "fsl,mpc5121-immr";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		#interrupt-cells = <2>;
-		ranges = <0x0 0x80000000 0x400000>;
-		reg = <0x80000000 0x400000>;
-		bus-frequency = <66000000>;	// 66 MHz ips bus
-
-		// IPIC
-		// interrupts cell = <intr #, sense>
-		// sense values match linux IORESOURCE_IRQ_* defines:
-		// sense == 8: Level, low assertion
-		// sense == 2: Edge, high-to-low change
-		//
-		ipic: interrupt-controller@c00 {
-			compatible = "fsl,mpc5121-ipic", "fsl,ipic";
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			reg = <0xc00 0x100>;
-		};
-
-		rtc@a00 {	// Real time clock
-			compatible = "fsl,mpc5121-rtc";
-			reg = <0xa00 0x100>;
-			interrupts = <79 0x8 80 0x8>;
-		};
-
-		reset@e00 {	// Reset module
-			compatible = "fsl,mpc5121-reset";
-			reg = <0xe00 0x100>;
-		};
-
-		clock@f00 {	// Clock control
-			compatible = "fsl,mpc5121-clock";
-			reg = <0xf00 0x100>;
-		};
-
-		pmc@1000{	//Power Management Controller
-			compatible = "fsl,mpc5121-pmc";
-			reg = <0x1000 0x100>;
-			interrupts = <83 0x2>;
-		};
-
-		gpio@1100 {
-			compatible = "fsl,mpc5121-gpio";
-			reg = <0x1100 0x100>;
-			interrupts = <78 0x8>;
-		};
-
-		can@1300 {
-			compatible = "fsl,mpc5121-mscan";
-			interrupts = <12 0x8>;
-			reg = <0x1300 0x80>;
-		};
-
-		can@1380 {
-			compatible = "fsl,mpc5121-mscan";
-			interrupts = <13 0x8>;
-			reg = <0x1380 0x80>;
-		};
 
 		i2c@1700 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,mpc5121-i2c";
-			reg = <0x1700 0x20>;
-			interrupts = <0x9 0x8>;
 			fsl,preserve-clocking;
 
 			eeprom@50 {
@@ -210,201 +108,92 @@
 			};
 		};
 
-		i2c@1740 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,mpc5121-i2c";
-			reg = <0x1740 0x20>;
-			interrupts = <0xb 0x8>;
-			fsl,preserve-clocking;
-		};
-
-		i2ccontrol@1760 {
-			compatible = "fsl,mpc5121-i2c-ctrl";
-			reg = <0x1760 0x8>;
-		};
-
-		axe@2000 {
-			compatible = "fsl,mpc5121-axe";
-			reg = <0x2000 0x100>;
-			interrupts = <42 0x8>;
-		};
-
-		display@2100 {
-			compatible = "fsl,mpc5121-diu";
-			reg = <0x2100 0x100>;
-			interrupts = <64 0x8>;
+		i2c@1720 {
+			status = "disabled";
 		};
 
-		can@2300 {
-			compatible = "fsl,mpc5121-mscan";
-			interrupts = <90 0x8>;
-			reg = <0x2300 0x80>;
-		};
-
-		can@2380 {
-			compatible = "fsl,mpc5121-mscan";
-			interrupts = <91 0x8>;
-			reg = <0x2380 0x80>;
+		i2c@1740 {
+			fsl,preserve-clocking;
 		};
 
-		viu@2400 {
-			compatible = "fsl,mpc5121-viu";
-			reg = <0x2400 0x400>;
-			interrupts = <67 0x8>;
+		ethernet@2800 {
+			phy-handle = <&phy0>;
 		};
 
 		mdio@2800 {
-			compatible = "fsl,mpc5121-fec-mdio";
-			reg = <0x2800 0x200>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			phy: ethernet-phy@0 {
+			phy0: ethernet-phy@1f {
 				compatible = "smsc,lan8700";
 				reg = <0x1f>;
 			};
 		};
 
-		eth0: ethernet@2800 {
-			compatible = "fsl,mpc5121-fec";
-			reg = <0x2800 0x200>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <4 0x8>;
-			phy-handle = < &phy >;
-		};
-
-		// USB1 using external ULPI PHY
+		/* USB1 using external ULPI PHY */
 		usb@3000 {
-			compatible = "fsl,mpc5121-usb2-dr";
-			reg = <0x3000 0x600>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupts = <43 0x8>;
 			dr_mode = "host";
-			phy_type = "ulpi";
 		};
 
-		// USB0 using internal UTMI PHY
+		/* USB0 using internal UTMI PHY */
 		usb@4000 {
-			compatible = "fsl,mpc5121-usb2-dr";
-			reg = <0x4000 0x600>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupts = <44 0x8>;
-			dr_mode = "otg";
-			phy_type = "utmi_wide";
 			fsl,invert-pwr-fault;
 		};
 
-		// IO control
-		ioctl@a000 {
-			compatible = "fsl,mpc5121-ioctl";
-			reg = <0xA000 0x1000>;
-		};
-
-		// 512x PSCs are not 52xx PSCs compatible
-		serial@11000 {
+		psc@11000 {
 			compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
-			cell-index = <0>;
-			reg = <0x11000 0x100>;
-			interrupts = <40 0x8>;
-			fsl,rx-fifo-size = <16>;
-			fsl,tx-fifo-size = <16>;
 		};
 
-		serial@11100 {
+		psc@11100 {
 			compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
-			cell-index = <1>;
-			reg = <0x11100 0x100>;
-			interrupts = <40 0x8>;
-			fsl,rx-fifo-size = <16>;
-			fsl,tx-fifo-size = <16>;
 		};
 
-		serial@11200 {
+		psc@11200 {
 			compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
-			cell-index = <2>;
-			reg = <0x11200 0x100>;
-			interrupts = <40 0x8>;
-			fsl,rx-fifo-size = <16>;
-			fsl,tx-fifo-size = <16>;
 		};
 
-		serial@11300 {
+		psc@11300 {
 			compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
-			cell-index = <3>;
-			reg = <0x11300 0x100>;
-			interrupts = <40 0x8>;
-			fsl,rx-fifo-size = <16>;
-			fsl,tx-fifo-size = <16>;
 		};
 
-		serial@11400 {
+		psc@11400 {
 			compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
-			cell-index = <4>;
-			reg = <0x11400 0x100>;
-			interrupts = <40 0x8>;
-			fsl,rx-fifo-size = <16>;
-			fsl,tx-fifo-size = <16>;
 		};
 
-		serial@11600 {
-			compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
-			cell-index = <6>;
-			reg = <0x11600 0x100>;
-			interrupts = <40 0x8>;
-			fsl,rx-fifo-size = <16>;
-			fsl,tx-fifo-size = <16>;
+		psc@11500 {
+			status = "disabled";
 		};
 
-		serial@11800 {
+		psc@11600 {
 			compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
-			cell-index = <8>;
-			reg = <0x11800 0x100>;
-			interrupts = <40 0x8>;
-			fsl,rx-fifo-size = <16>;
-			fsl,tx-fifo-size = <16>;
 		};
 
-		serial@11B00 {
-			compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
-			cell-index = <11>;
-			reg = <0x11B00 0x100>;
-			interrupts = <40 0x8>;
-			fsl,rx-fifo-size = <16>;
-			fsl,tx-fifo-size = <16>;
+		psc@11700 {
+			status = "disabled";
 		};
 
-		pscfifo@11f00 {
-			compatible = "fsl,mpc5121-psc-fifo";
-			reg = <0x11f00 0x100>;
-			interrupts = <40 0x8>;
+		psc@11800 {
+			compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
 		};
 
-		spi@11900 {
+		psc@11900 {
 			compatible = "fsl,mpc5121-psc-spi", "fsl,mpc5121-psc";
-			cell-index = <9>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			reg = <0x11900 0x100>;
-			interrupts = <40 0x8>;
-			fsl,rx-fifo-size = <16>;
-			fsl,tx-fifo-size = <16>;
 
-			// 7845 touch screen controller
+			/* ADS7845 touch screen controller */
 			ts@0 {
 				compatible = "ti,ads7846";
 				reg = <0x0>;
 				spi-max-frequency = <3000000>;
-				// pen irq is GPIO25
+				/* pen irq is GPIO25 */
 				interrupts = <78 0x8>;
 			};
 		};
 
-		dma@14000 {
-			compatible = "fsl,mpc5121-dma";
-			reg = <0x14000 0x1800>;
-			interrupts = <65 0x8>;
+		psc@11a00 {
+			status = "disabled";
+		};
+
+		psc@11b00 {
+			compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
 		};
 	};
 };
diff --git a/arch/powerpc/boot/dts/uc101.dts b/arch/powerpc/boot/dts/uc101.dts
index ba83d5488ec..5c462194ef0 100644
--- a/arch/powerpc/boot/dts/uc101.dts
+++ b/arch/powerpc/boot/dts/uc101.dts
@@ -13,54 +13,20 @@
 
 /include/ "mpc5200b.dtsi"
 
+&gpt0 { gpio-controller; };
+&gpt1 { gpio-controller; };
+&gpt2 { gpio-controller; };
+&gpt3 { gpio-controller; };
+&gpt4 { gpio-controller; };
+&gpt5 { gpio-controller; };
+&gpt6 { gpio-controller; };
+&gpt7 { gpio-controller; };
+
 / {
 	model = "manroland,uc101";
 	compatible = "manroland,uc101";
 
 	soc5200@f0000000 {
-		gpt0: timer@600 {	// General Purpose Timer in GPIO mode
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpt1: timer@610 {	// General Purpose Timer in GPIO mode
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpt2: timer@620 {	// General Purpose Timer in GPIO mode
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpt3: timer@630 {	// General Purpose Timer in GPIO mode
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x630 0x10>;
-			interrupts = <1 12 0>;
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpt4: timer@640 {	// General Purpose Timer in GPIO mode
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpt5: timer@650 {	// General Purpose Timer in GPIO mode
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpt6: timer@660 {	// General Purpose Timer in GPIO mode
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpt7: timer@670 {	// General Purpose Timer in GPIO mode
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
 		rtc@800 {
 			status = "disabled";
 		};