Merge rsync://rsync.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6

7 files changed, 1889 insertions, 0 deletions

diff --git a/arch/powerpc/boot/dts/mpc7448hpc2.dts b/arch/powerpc/boot/dts/mpc7448hpc2.dts
new file mode 100644
index 00000000000..d7b985e6bd2
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc7448hpc2.dts
@@ -0,0 +1,190 @@
+/*
+ * MPC7448HPC2 (Taiga) board Device Tree Source
+ *
+ * Copyright 2006 Freescale Semiconductor Inc.
+ * 2006 Roy Zang <Roy Zang at freescale.com>.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+
+/ {
+	model = "mpc7448hpc2";
+	compatible = "mpc74xx";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	linux,phandle = <100>;
+
+	cpus {
+		#cpus = <1>;
+		#address-cells = <1>;
+		#size-cells =<0>;
+		linux,phandle = <200>;
+				
+		PowerPC,7448@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <20>;	// 32 bytes
+			i-cache-line-size = <20>;	// 32 bytes
+			d-cache-size = <8000>;		// L1, 32K bytes
+			i-cache-size = <8000>;		// L1, 32K bytes
+			timebase-frequency = <0>;	// 33 MHz, from uboot
+			clock-frequency = <0>;		// From U-Boot
+			bus-frequency = <0>;		// From U-Boot
+			32-bit;
+			linux,phandle = <201>;
+			linux,boot-cpu;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		linux,phandle = <300>;
+		reg = <00000000 20000000	// DDR2   512M at 0
+		       >;
+	};
+
+  	tsi108@c0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		#interrupt-cells = <2>;
+		device_type = "tsi-bridge";
+		ranges = <00000000 c0000000 00010000>;
+		reg = <c0000000 00010000>;
+		bus-frequency = <0>;
+
+		i2c@7000 {
+			interrupt-parent = <7400>;
+			interrupts = <E 0>;
+			reg = <7000 400>;
+			device_type = "i2c";
+			compatible  = "tsi-i2c";
+		};
+
+		mdio@6000 {
+			device_type = "mdio";
+			compatible = "tsi-ethernet";
+
+			ethernet-phy@6000 {
+				linux,phandle = <6000>;
+				interrupt-parent = <7400>;
+				interrupts = <2 1>;
+				reg = <6000 50>;
+				phy-id = <8>;
+				device_type = "ethernet-phy";
+			};
+
+			ethernet-phy@6400 {
+				linux,phandle = <6400>;
+				interrupt-parent = <7400>;
+				interrupts = <2 1>;
+				reg = <6000 50>;
+				phy-id = <9>;
+				device_type = "ethernet-phy";
+			};
+
+		};
+
+		ethernet@6200 {
+			#size-cells = <0>;
+			device_type = "network";
+			model = "TSI-ETH";
+			compatible = "tsi-ethernet";
+			reg = <6000 200>;
+			address = [ 00 06 D2 00 00 01 ];
+			interrupts = <10 2>;
+			interrupt-parent = <7400>;
+			phy-handle = <6000>;
+		};
+
+		ethernet@6600 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			device_type = "network";
+			model = "TSI-ETH";
+			compatible = "tsi-ethernet";
+			reg = <6400 200>;
+			address = [ 00 06 D2 00 00 02 ];
+			interrupts = <11 2>;
+			interrupt-parent = <7400>;
+			phy-handle = <6400>;
+		};
+
+		serial@7808 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <7808 200>;
+			clock-frequency = <3f6b5a00>;
+			interrupts = <c 0>;
+			interrupt-parent = <7400>;
+		};
+
+		serial@7c08 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <7c08 200>;
+			clock-frequency = <3f6b5a00>;
+			interrupts = <d 0>;
+			interrupt-parent = <7400>;
+		};
+
+	  	pic@7400 {
+			linux,phandle = <7400>;
+			clock-frequency = <0>;
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <7400 400>;
+			built-in;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+                       	big-endian;
+		};
+		pci@1000 {
+			compatible = "tsi10x";
+			device_type = "pci";
+			linux,phandle = <1000>;
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			reg = <1000 1000>;
+			bus-range = <0 0>;
+			ranges = <02000000 0 e0000000 e0000000 0 1A000000	
+				  01000000 0 00000000 fa000000 0 00010000>;
+			clock-frequency = <7f28154>;
+			interrupt-parent = <7400>;
+			interrupts = <17 2>;
+			interrupt-map-mask = <f800 0 0 7>;
+			interrupt-map = <
+
+				/* IDSEL 0x11 */
+				0800 0 0 1 7400 24 0
+				0800 0 0 2 7400 25 0
+				0800 0 0 3 7400 26 0
+				0800 0 0 4 7400 27 0
+
+				/* IDSEL 0x12 */
+				1000 0 0 1 7400 25 0
+				1000 0 0 2 7400 26 0
+				1000 0 0 3 7400 27 0
+				1000 0 0 4 7400 24 0
+
+				/* IDSEL 0x13 */
+				1800 0 0 1 7400 26 0
+				1800 0 0 2 7400 27 0
+				1800 0 0 3 7400 24 0
+				1800 0 0 4 7400 25 0
+
+				/* IDSEL 0x14 */
+				2000 0 0 1 7400 27 0
+				2000 0 0 2 7400 24 0
+				2000 0 0 3 7400 25 0
+				2000 0 0 4 7400 26 0
+				>;
+		};
+	};
+
+};
diff --git a/arch/powerpc/boot/dts/mpc8349emds.dts b/arch/powerpc/boot/dts/mpc8349emds.dts
new file mode 100644
index 00000000000..12f5dbf3055
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc8349emds.dts
@@ -0,0 +1,328 @@
+/*
+ * MPC8349E MDS Device Tree Source
+ *
+ * Copyright 2005, 2006 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/ {
+	model = "MPC8349EMDS";
+	compatible = "MPC834xMDS";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#cpus = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8349@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <20>;	// 32 bytes
+			i-cache-line-size = <20>;	// 32 bytes
+			d-cache-size = <8000>;		// L1, 32K
+			i-cache-size = <8000>;		// L1, 32K
+			timebase-frequency = <0>;	// from bootloader
+			bus-frequency = <0>;		// from bootloader
+			clock-frequency = <0>;		// from bootloader
+			32-bit;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <00000000 10000000>;	// 256MB at 0
+	};
+
+	soc8349@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		#interrupt-cells = <2>;
+		device_type = "soc";
+		ranges = <0 e0000000 00100000>;
+		reg = <e0000000 00000200>;
+		bus-frequency = <0>;
+
+		wdt@200 {
+			device_type = "watchdog";
+			compatible = "mpc83xx_wdt";
+			reg = <200 100>;
+		};
+
+		i2c@3000 {
+			device_type = "i2c";
+			compatible = "fsl-i2c";
+			reg = <3000 100>;
+			interrupts = <e 8>;
+			interrupt-parent = <700>;
+			dfsrr;
+		};
+
+		i2c@3100 {
+			device_type = "i2c";
+			compatible = "fsl-i2c";
+			reg = <3100 100>;
+			interrupts = <f 8>;
+			interrupt-parent = <700>;
+			dfsrr;
+		};
+
+		spi@7000 {
+			device_type = "spi";
+			compatible = "mpc83xx_spi";
+			reg = <7000 1000>;
+			interrupts = <10 8>;
+			interrupt-parent = <700>;
+			mode = <0>;
+		};
+
+		/* phy type (ULPI or SERIAL) are only types supportted for MPH */
+		/* port = 0 or 1 */
+		usb@22000 {
+			device_type = "usb";
+			compatible = "fsl-usb2-mph";
+			reg = <22000 1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupt-parent = <700>;
+			interrupts = <27 2>;
+			phy_type = "ulpi";
+			port1;
+		};
+		/* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
+		usb@23000 {
+			device_type = "usb";
+			compatible = "fsl-usb2-dr";
+			reg = <23000 1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupt-parent = <700>;
+			interrupts = <26 2>;
+			phy_type = "ulpi";
+		};
+
+		mdio@24520 {
+			device_type = "mdio";
+			compatible = "gianfar";
+			reg = <24520 20>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			linux,phandle = <24520>;
+			ethernet-phy@0 {
+				linux,phandle = <2452000>;
+				interrupt-parent = <700>;
+				interrupts = <11 2>;
+				reg = <0>;
+				device_type = "ethernet-phy";
+			};
+			ethernet-phy@1 {
+				linux,phandle = <2452001>;
+				interrupt-parent = <700>;
+				interrupts = <12 2>;
+				reg = <1>;
+				device_type = "ethernet-phy";
+			};
+		};
+
+		ethernet@24000 {
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <24000 1000>;
+			address = [ 00 00 00 00 00 00 ];
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <20 8 21 8 22 8>;
+			interrupt-parent = <700>;
+			phy-handle = <2452000>;
+		};
+
+		ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <25000 1000>;
+			address = [ 00 00 00 00 00 00 ];
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <23 8 24 8 25 8>;
+			interrupt-parent = <700>;
+			phy-handle = <2452001>;
+		};
+
+		serial@4500 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <4500 100>;
+			clock-frequency = <0>;
+			interrupts = <9 8>;
+			interrupt-parent = <700>;
+		};
+
+		serial@4600 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <4600 100>;
+			clock-frequency = <0>;
+			interrupts = <a 8>;
+			interrupt-parent = <700>;
+		};
+
+		pci@8500 {
+			interrupt-map-mask = <f800 0 0 7>;
+			interrupt-map = <
+
+					/* IDSEL 0x11 */
+					 8800 0 0 1 700 14 8
+					 8800 0 0 2 700 15 8
+					 8800 0 0 3 700 16 8
+					 8800 0 0 4 700 17 8
+
+					/* IDSEL 0x12 */
+					 9000 0 0 1 700 16 8
+					 9000 0 0 2 700 17 8
+					 9000 0 0 3 700 14 8
+					 9000 0 0 4 700 15 8
+
+					/* IDSEL 0x13 */
+					 9800 0 0 1 700 17 8
+					 9800 0 0 2 700 14 8
+					 9800 0 0 3 700 15 8
+					 9800 0 0 4 700 16 8
+
+					/* IDSEL 0x15 */
+					 a800 0 0 1 700 14 8
+					 a800 0 0 2 700 15 8
+					 a800 0 0 3 700 16 8
+					 a800 0 0 4 700 17 8
+
+					/* IDSEL 0x16 */
+					 b000 0 0 1 700 17 8
+					 b000 0 0 2 700 14 8
+					 b000 0 0 3 700 15 8
+					 b000 0 0 4 700 16 8
+
+					/* IDSEL 0x17 */
+					 b800 0 0 1 700 16 8
+					 b800 0 0 2 700 17 8
+					 b800 0 0 3 700 14 8
+					 b800 0 0 4 700 15 8
+
+					/* IDSEL 0x18 */
+					 b000 0 0 1 700 15 8
+					 b000 0 0 2 700 16 8
+					 b000 0 0 3 700 17 8
+					 b000 0 0 4 700 14 8>;
+			interrupt-parent = <700>;
+			interrupts = <42 8>;
+			bus-range = <0 0>;
+			ranges = <02000000 0 a0000000 a0000000 0 10000000
+				  42000000 0 80000000 80000000 0 10000000
+				  01000000 0 00000000 e2000000 0 00100000>;
+			clock-frequency = <3f940aa>;
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			reg = <8500 100>;
+			compatible = "83xx";
+			device_type = "pci";
+		};
+
+		pci@8600 {
+			interrupt-map-mask = <f800 0 0 7>;
+			interrupt-map = <
+
+					/* IDSEL 0x11 */
+					 8800 0 0 1 700 14 8
+					 8800 0 0 2 700 15 8
+					 8800 0 0 3 700 16 8
+					 8800 0 0 4 700 17 8
+
+					/* IDSEL 0x12 */
+					 9000 0 0 1 700 16 8
+					 9000 0 0 2 700 17 8
+					 9000 0 0 3 700 14 8
+					 9000 0 0 4 700 15 8
+
+					/* IDSEL 0x13 */
+					 9800 0 0 1 700 17 8
+					 9800 0 0 2 700 14 8
+					 9800 0 0 3 700 15 8
+					 9800 0 0 4 700 16 8
+
+					/* IDSEL 0x15 */
+					 a800 0 0 1 700 14 8
+					 a800 0 0 2 700 15 8
+					 a800 0 0 3 700 16 8
+					 a800 0 0 4 700 17 8
+
+					/* IDSEL 0x16 */
+					 b000 0 0 1 700 17 8
+					 b000 0 0 2 700 14 8
+					 b000 0 0 3 700 15 8
+					 b000 0 0 4 700 16 8
+
+					/* IDSEL 0x17 */
+					 b800 0 0 1 700 16 8
+					 b800 0 0 2 700 17 8
+					 b800 0 0 3 700 14 8
+					 b800 0 0 4 700 15 8
+
+					/* IDSEL 0x18 */
+					 b000 0 0 1 700 15 8
+					 b000 0 0 2 700 16 8
+					 b000 0 0 3 700 17 8
+					 b000 0 0 4 700 14 8>;
+			interrupt-parent = <700>;
+			interrupts = <42 8>;
+			bus-range = <0 0>;
+			ranges = <02000000 0 b0000000 b0000000 0 10000000
+				  42000000 0 90000000 90000000 0 10000000
+				  01000000 0 00000000 e2100000 0 00100000>;
+			clock-frequency = <3f940aa>;
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			reg = <8600 100>;
+			compatible = "83xx";
+			device_type = "pci";
+		};
+
+		/* May need to remove if on a part without crypto engine */
+		crypto@30000 {
+			device_type = "crypto";
+			model = "SEC2";
+			compatible = "talitos";
+			reg = <30000 10000>;
+			interrupts = <b 8>;
+			interrupt-parent = <700>;
+			num-channels = <4>;
+			channel-fifo-len = <18>;
+			exec-units-mask = <0000007e>;
+			/* desc mask is for rev2.0,
+			 * we need runtime fixup for >2.0 */
+			descriptor-types-mask = <01010ebf>;
+		};
+
+		/* IPIC
+		 * interrupts cell = <intr #, sense>
+		 * sense values match linux IORESOURCE_IRQ_* defines:
+		 * sense == 8: Level, low assertion
+		 * sense == 2: Edge, high-to-low change
+		 */
+		pic@700 {
+			linux,phandle = <700>;
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <700 100>;
+			built-in;
+			device_type = "ipic";
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/mpc8540ads.dts b/arch/powerpc/boot/dts/mpc8540ads.dts
new file mode 100644
index 00000000000..5f41c1f7a5f
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc8540ads.dts
@@ -0,0 +1,257 @@
+/*
+ * MPC8540 ADS Device Tree Source
+ *
+ * Copyright 2006 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+
+/ {
+	model = "MPC8540ADS";
+	compatible = "MPC85xxADS";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	linux,phandle = <100>;
+
+	cpus {
+		#cpus = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		linux,phandle = <200>;
+
+		PowerPC,8540@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <20>;	// 32 bytes
+			i-cache-line-size = <20>;	// 32 bytes
+			d-cache-size = <8000>;		// L1, 32K
+			i-cache-size = <8000>;		// L1, 32K
+			timebase-frequency = <0>;	//  33 MHz, from uboot
+			bus-frequency = <0>;	// 166 MHz
+			clock-frequency = <0>;	// 825 MHz, from uboot
+			32-bit;
+			linux,phandle = <201>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		linux,phandle = <300>;
+		reg = <00000000 08000000>;	// 128M at 0x0
+	};
+
+	soc8540@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		#interrupt-cells = <2>;
+		device_type = "soc";
+		ranges = <0 e0000000 00100000>;
+		reg = <e0000000 00100000>;	// CCSRBAR 1M
+		bus-frequency = <0>;
+
+		i2c@3000 {
+			device_type = "i2c";
+			compatible = "fsl-i2c";
+			reg = <3000 100>;
+			interrupts = <1b 2>;
+			interrupt-parent = <40000>;
+			dfsrr;
+		};
+
+		mdio@24520 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			device_type = "mdio";
+			compatible = "gianfar";
+			reg = <24520 20>;
+			linux,phandle = <24520>;
+			ethernet-phy@0 {
+				linux,phandle = <2452000>;
+				interrupt-parent = <40000>;
+				interrupts = <35 1>;
+				reg = <0>;
+				device_type = "ethernet-phy";
+			};
+			ethernet-phy@1 {
+				linux,phandle = <2452001>;
+				interrupt-parent = <40000>;
+				interrupts = <35 1>;
+				reg = <1>;
+				device_type = "ethernet-phy";
+			};
+			ethernet-phy@3 {
+				linux,phandle = <2452003>;
+				interrupt-parent = <40000>;
+				interrupts = <37 1>;
+				reg = <3>;
+				device_type = "ethernet-phy";
+			};
+		};
+
+		ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <24000 1000>;
+			address = [ 00 E0 0C 00 73 00 ];
+			local-mac-address = [ 00 E0 0C 00 73 00 ];
+			interrupts = <d 2 e 2 12 2>;
+			interrupt-parent = <40000>;
+			phy-handle = <2452000>;
+		};
+
+		ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <25000 1000>;
+			address = [ 00 E0 0C 00 73 01 ];
+			local-mac-address = [ 00 E0 0C 00 73 01 ];
+			interrupts = <13 2 14 2 18 2>;
+			interrupt-parent = <40000>;
+			phy-handle = <2452001>;
+		};
+
+		ethernet@26000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			device_type = "network";
+			model = "FEC";
+			compatible = "gianfar";
+			reg = <26000 1000>;
+			address = [ 00 E0 0C 00 73 02 ];
+			local-mac-address = [ 00 E0 0C 00 73 02 ];
+			interrupts = <19 2>;
+			interrupt-parent = <40000>;
+			phy-handle = <2452003>;
+		};
+
+		serial@4500 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <4500 100>; 	// reg base, size
+			clock-frequency = <0>; 	// should we fill in in uboot?
+			interrupts = <1a 2>;
+			interrupt-parent = <40000>;
+		};
+
+		serial@4600 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <4600 100>;	// reg base, size
+			clock-frequency = <0>; 	// should we fill in in uboot?
+			interrupts = <1a 2>;
+			interrupt-parent = <40000>;
+		};
+		pci@8000 {
+			linux,phandle = <8000>;
+			interrupt-map-mask = <f800 0 0 7>;
+			interrupt-map = <
+
+				/* IDSEL 0x02 */
+				1000 0 0 1 40000 31 1
+				1000 0 0 2 40000 32 1
+				1000 0 0 3 40000 33 1
+				1000 0 0 4 40000 34 1
+
+				/* IDSEL 0x03 */
+				1800 0 0 1 40000 34 1
+				1800 0 0 2 40000 31 1
+				1800 0 0 3 40000 32 1
+				1800 0 0 4 40000 33 1
+
+				/* IDSEL 0x04 */
+				2000 0 0 1 40000 33 1
+				2000 0 0 2 40000 34 1
+				2000 0 0 3 40000 31 1
+				2000 0 0 4 40000 32 1
+
+				/* IDSEL 0x05 */
+				2800 0 0 1 40000 32 1
+				2800 0 0 2 40000 33 1
+				2800 0 0 3 40000 34 1
+				2800 0 0 4 40000 31 1
+
+				/* IDSEL 0x0c */
+				6000 0 0 1 40000 31 1
+				6000 0 0 2 40000 32 1
+				6000 0 0 3 40000 33 1
+				6000 0 0 4 40000 34 1
+
+				/* IDSEL 0x0d */
+				6800 0 0 1 40000 34 1
+				6800 0 0 2 40000 31 1
+				6800 0 0 3 40000 32 1
+				6800 0 0 4 40000 33 1
+
+				/* IDSEL 0x0e */
+				7000 0 0 1 40000 33 1
+				7000 0 0 2 40000 34 1
+				7000 0 0 3 40000 31 1
+				7000 0 0 4 40000 32 1
+
+				/* IDSEL 0x0f */
+				7800 0 0 1 40000 32 1
+				7800 0 0 2 40000 33 1
+				7800 0 0 3 40000 34 1
+				7800 0 0 4 40000 31 1
+
+				/* IDSEL 0x12 */
+				9000 0 0 1 40000 31 1
+				9000 0 0 2 40000 32 1
+				9000 0 0 3 40000 33 1
+				9000 0 0 4 40000 34 1
+
+				/* IDSEL 0x13 */
+				9800 0 0 1 40000 34 1
+				9800 0 0 2 40000 31 1
+				9800 0 0 3 40000 32 1
+				9800 0 0 4 40000 33 1
+
+				/* IDSEL 0x14 */
+				a000 0 0 1 40000 33 1
+				a000 0 0 2 40000 34 1
+				a000 0 0 3 40000 31 1
+				a000 0 0 4 40000 32 1
+
+				/* IDSEL 0x15 */
+				a800 0 0 1 40000 32 1
+				a800 0 0 2 40000 33 1
+				a800 0 0 3 40000 34 1
+				a800 0 0 4 40000 31 1>;
+			interrupt-parent = <40000>;
+			interrupts = <08 2>;
+			bus-range = <0 0>;
+			ranges = <02000000 0 80000000 80000000 0 20000000
+				  01000000 0 00000000 e2000000 0 00100000>;
+			clock-frequency = <3f940aa>;
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			reg = <8000 1000>;
+			compatible = "85xx";
+			device_type = "pci";
+		};
+
+		pic@40000 {
+			linux,phandle = <40000>;
+			clock-frequency = <0>;
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <40000 40000>;
+			built-in;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+			big-endian;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/mpc8541cds.dts b/arch/powerpc/boot/dts/mpc8541cds.dts
new file mode 100644
index 00000000000..7be0bc659e1
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc8541cds.dts
@@ -0,0 +1,244 @@
+/*
+ * MPC8541 CDS Device Tree Source
+ *
+ * Copyright 2006 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+
+/ {
+	model = "MPC8541CDS";
+	compatible = "MPC85xxCDS";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	linux,phandle = <100>;
+
+	cpus {
+		#cpus = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		linux,phandle = <200>;
+
+		PowerPC,8541@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <20>;	// 32 bytes
+			i-cache-line-size = <20>;	// 32 bytes
+			d-cache-size = <8000>;		// L1, 32K
+			i-cache-size = <8000>;		// L1, 32K
+			timebase-frequency = <0>;	//  33 MHz, from uboot
+			bus-frequency = <0>;	// 166 MHz
+			clock-frequency = <0>;	// 825 MHz, from uboot
+			32-bit;
+			linux,phandle = <201>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		linux,phandle = <300>;
+		reg = <00000000 08000000>;	// 128M at 0x0
+	};
+
+	soc8541@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		#interrupt-cells = <2>;
+		device_type = "soc";
+		ranges = <0 e0000000 00100000>;
+		reg = <e0000000 00100000>;	// CCSRBAR 1M
+		bus-frequency = <0>;
+
+		i2c@3000 {
+			device_type = "i2c";
+			compatible = "fsl-i2c";
+			reg = <3000 100>;
+			interrupts = <1b 2>;
+			interrupt-parent = <40000>;
+			dfsrr;
+		};
+
+		mdio@24520 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			device_type = "mdio";
+			compatible = "gianfar";
+			reg = <24520 20>;
+			linux,phandle = <24520>;
+			ethernet-phy@0 {
+				linux,phandle = <2452000>;
+				interrupt-parent = <40000>;
+				interrupts = <35 0>;
+				reg = <0>;
+				device_type = "ethernet-phy";
+			};
+			ethernet-phy@1 {
+				linux,phandle = <2452001>;
+				interrupt-parent = <40000>;
+				interrupts = <35 0>;
+				reg = <1>;
+				device_type = "ethernet-phy";
+			};
+		};
+
+		ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <24000 1000>;
+			local-mac-address = [ 00 E0 0C 00 73 00 ];
+			interrupts = <d 2 e 2 12 2>;
+			interrupt-parent = <40000>;
+			phy-handle = <2452000>;
+		};
+
+		ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <25000 1000>;
+			local-mac-address = [ 00 E0 0C 00 73 01 ];
+			interrupts = <13 2 14 2 18 2>;
+			interrupt-parent = <40000>;
+			phy-handle = <2452001>;
+		};
+
+		serial@4500 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <4500 100>; 	// reg base, size
+			clock-frequency = <0>; 	// should we fill in in uboot?
+			interrupts = <1a 2>;
+			interrupt-parent = <40000>;
+		};
+
+		serial@4600 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <4600 100>;	// reg base, size
+			clock-frequency = <0>; 	// should we fill in in uboot?
+			interrupts = <1a 2>;
+			interrupt-parent = <40000>;
+		};
+
+		pci@8000 {
+			linux,phandle = <8000>;
+			interrupt-map-mask = <1f800 0 0 7>;
+			interrupt-map = <
+
+				/* IDSEL 0x10 */
+				08000 0 0 1 40000 30 1
+				08000 0 0 2 40000 31 1
+				08000 0 0 3 40000 32 1
+				08000 0 0 4 40000 33 1
+
+				/* IDSEL 0x11 */
+				08800 0 0 1 40000 30 1
+				08800 0 0 2 40000 31 1
+				08800 0 0 3 40000 32 1
+				08800 0 0 4 40000 33 1
+
+				/* IDSEL 0x12 (Slot 1) */
+				09000 0 0 1 40000 30 1
+				09000 0 0 2 40000 31 1
+				09000 0 0 3 40000 32 1
+				09000 0 0 4 40000 33 1
+
+				/* IDSEL 0x13 (Slot 2) */
+				09800 0 0 1 40000 31 1
+				09800 0 0 2 40000 32 1
+				09800 0 0 3 40000 33 1
+				09800 0 0 4 40000 30 1
+
+				/* IDSEL 0x14 (Slot 3) */
+				0a000 0 0 1 40000 32 1
+				0a000 0 0 2 40000 33 1
+				0a000 0 0 3 40000 30 1
+				0a000 0 0 4 40000 31 1
+
+				/* IDSEL 0x15 (Slot 4) */
+				0a800 0 0 1 40000 33 1
+				0a800 0 0 2 40000 30 1
+				0a800 0 0 3 40000 31 1
+				0a800 0 0 4 40000 32 1
+
+				/* Bus 1 (Tundra Bridge) */
+				/* IDSEL 0x12 (ISA bridge) */
+				19000 0 0 1 40000 30 1
+				19000 0 0 2 40000 31 1
+				19000 0 0 3 40000 32 1
+				19000 0 0 4 40000 33 1>;
+			interrupt-parent = <40000>;
+			interrupts = <08 2>;
+			bus-range = <0 0>;
+			ranges = <02000000 0 80000000 80000000 0 20000000
+				  01000000 0 00000000 e2000000 0 00100000>;
+			clock-frequency = <3f940aa>;
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			reg = <8000 1000>;
+			compatible = "85xx";
+			device_type = "pci";
+
+			i8259@19000 {
+				clock-frequency = <0>;
+				interrupt-controller;
+				device_type = "interrupt-controller";
+				reg = <19000 0 0 0 1>;
+				#address-cells = <0>;
+				#interrupt-cells = <2>;
+				built-in;
+				compatible = "chrp,iic";
+				big-endian;
+				interrupts = <1>;
+				interrupt-parent = <8000>;
+			};
+		};
+
+		pci@9000 {
+			linux,phandle = <9000>;
+			interrupt-map-mask = <f800 0 0 7>;
+			interrupt-map = <
+
+				/* IDSEL 0x15 */
+				a800 0 0 1 40000 3b 1
+				a800 0 0 2 40000 3b 1
+				a800 0 0 3 40000 3b 1
+				a800 0 0 4 40000 3b 1>;
+			interrupt-parent = <40000>;
+			interrupts = <09 2>;
+			bus-range = <0 0>;
+			ranges = <02000000 0 a0000000 a0000000 0 20000000
+				  01000000 0 00000000 e3000000 0 00100000>;
+			clock-frequency = <3f940aa>;
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			reg = <9000 1000>;
+			compatible = "85xx";
+			device_type = "pci";
+		};
+
+		pic@40000 {
+			linux,phandle = <40000>;
+			clock-frequency = <0>;
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <40000 40000>;
+			built-in;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+                        big-endian;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/mpc8548cds.dts b/arch/powerpc/boot/dts/mpc8548cds.dts
new file mode 100644
index 00000000000..893d7957c17
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc8548cds.dts
@@ -0,0 +1,287 @@
+/*
+ * MPC8555 CDS Device Tree Source
+ *
+ * Copyright 2006 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+
+/ {
+	model = "MPC8548CDS";
+	compatible = "MPC85xxCDS";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	linux,phandle = <100>;
+
+	cpus {
+		#cpus = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		linux,phandle = <200>;
+
+		PowerPC,8548@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <20>;	// 32 bytes
+			i-cache-line-size = <20>;	// 32 bytes
+			d-cache-size = <8000>;		// L1, 32K
+			i-cache-size = <8000>;		// L1, 32K
+			timebase-frequency = <0>;	//  33 MHz, from uboot
+			bus-frequency = <0>;	// 166 MHz
+			clock-frequency = <0>;	// 825 MHz, from uboot
+			32-bit;
+			linux,phandle = <201>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		linux,phandle = <300>;
+		reg = <00000000 08000000>;	// 128M at 0x0
+	};
+
+	soc8548@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		#interrupt-cells = <2>;
+		device_type = "soc";
+		ranges = <0 e0000000 00100000>;
+		reg = <e0000000 00100000>;	// CCSRBAR 1M
+		bus-frequency = <0>;
+
+		i2c@3000 {
+			device_type = "i2c";
+			compatible = "fsl-i2c";
+			reg = <3000 100>;
+			interrupts = <1b 2>;
+			interrupt-parent = <40000>;
+			dfsrr;
+		};
+
+		mdio@24520 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			device_type = "mdio";
+			compatible = "gianfar";
+			reg = <24520 20>;
+			linux,phandle = <24520>;
+			ethernet-phy@0 {
+				linux,phandle = <2452000>;
+				interrupt-parent = <40000>;
+				interrupts = <35 0>;
+				reg = <0>;
+				device_type = "ethernet-phy";
+			};
+			ethernet-phy@1 {
+				linux,phandle = <2452001>;
+				interrupt-parent = <40000>;
+				interrupts = <35 0>;
+				reg = <1>;
+				device_type = "ethernet-phy";
+			};
+
+			ethernet-phy@2 {
+				linux,phandle = <2452002>;
+				interrupt-parent = <40000>;
+				interrupts = <35 0>;
+				reg = <2>;
+				device_type = "ethernet-phy";
+			};
+			ethernet-phy@3 {
+				linux,phandle = <2452003>;
+				interrupt-parent = <40000>;
+				interrupts = <35 0>;
+				reg = <3>;
+				device_type = "ethernet-phy";
+			};
+		};
+
+		ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <24000 1000>;
+			local-mac-address = [ 00 E0 0C 00 73 00 ];
+			interrupts = <d 2 e 2 12 2>;
+			interrupt-parent = <40000>;
+			phy-handle = <2452000>;
+		};
+
+		ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <25000 1000>;
+			local-mac-address = [ 00 E0 0C 00 73 01 ];
+			interrupts = <13 2 14 2 18 2>;
+			interrupt-parent = <40000>;
+			phy-handle = <2452001>;
+		};
+
+		ethernet@26000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <26000 1000>;
+			local-mac-address = [ 00 E0 0C 00 73 02 ];
+			interrupts = <f 2 10 2 11 2>;
+			interrupt-parent = <40000>;
+			phy-handle = <2452001>;
+		};
+
+/* eTSEC 4 is currently broken
+		ethernet@27000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <27000 1000>;
+			local-mac-address = [ 00 E0 0C 00 73 03 ];
+			interrupts = <15 2 16 2 17 2>;
+			interrupt-parent = <40000>;
+			phy-handle = <2452001>;
+		};
+ */
+
+		serial@4500 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <4500 100>; 	// reg base, size
+			clock-frequency = <0>; 	// should we fill in in uboot?
+			interrupts = <1a 2>;
+			interrupt-parent = <40000>;
+		};
+
+		serial@4600 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <4600 100>;	// reg base, size
+			clock-frequency = <0>; 	// should we fill in in uboot?
+			interrupts = <1a 2>;
+			interrupt-parent = <40000>;
+		};
+
+		pci@8000 {
+			linux,phandle = <8000>;
+			interrupt-map-mask = <1f800 0 0 7>;
+			interrupt-map = <
+
+				/* IDSEL 0x10 */
+				08000 0 0 1 40000 30 1
+				08000 0 0 2 40000 31 1
+				08000 0 0 3 40000 32 1
+				08000 0 0 4 40000 33 1
+
+				/* IDSEL 0x11 */
+				08800 0 0 1 40000 30 1
+				08800 0 0 2 40000 31 1
+				08800 0 0 3 40000 32 1
+				08800 0 0 4 40000 33 1
+
+				/* IDSEL 0x12 (Slot 1) */
+				09000 0 0 1 40000 30 1
+				09000 0 0 2 40000 31 1
+				09000 0 0 3 40000 32 1
+				09000 0 0 4 40000 33 1
+
+				/* IDSEL 0x13 (Slot 2) */
+				09800 0 0 1 40000 31 1
+				09800 0 0 2 40000 32 1
+				09800 0 0 3 40000 33 1
+				09800 0 0 4 40000 30 1
+
+				/* IDSEL 0x14 (Slot 3) */
+				0a000 0 0 1 40000 32 1
+				0a000 0 0 2 40000 33 1
+				0a000 0 0 3 40000 30 1
+				0a000 0 0 4 40000 31 1
+
+				/* IDSEL 0x15 (Slot 4) */
+				0a800 0 0 1 40000 33 1
+				0a800 0 0 2 40000 30 1
+				0a800 0 0 3 40000 31 1
+				0a800 0 0 4 40000 32 1
+
+				/* Bus 1 (Tundra Bridge) */
+				/* IDSEL 0x12 (ISA bridge) */
+				19000 0 0 1 40000 30 1
+				19000 0 0 2 40000 31 1
+				19000 0 0 3 40000 32 1
+				19000 0 0 4 40000 33 1>;
+			interrupt-parent = <40000>;
+			interrupts = <08 2>;
+			bus-range = <0 0>;
+			ranges = <02000000 0 80000000 80000000 0 20000000
+				  01000000 0 00000000 e2000000 0 00100000>;
+			clock-frequency = <3f940aa>;
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			reg = <8000 1000>;
+			compatible = "85xx";
+			device_type = "pci";
+
+			i8259@19000 {
+				clock-frequency = <0>;
+				interrupt-controller;
+				device_type = "interrupt-controller";
+				reg = <19000 0 0 0 1>;
+				#address-cells = <0>;
+				#interrupt-cells = <2>;
+				built-in;
+				compatible = "chrp,iic";
+				big-endian;
+				interrupts = <1>;
+				interrupt-parent = <8000>;
+			};
+		};
+
+		pci@9000 {
+			linux,phandle = <9000>;
+			interrupt-map-mask = <f800 0 0 7>;
+			interrupt-map = <
+
+				/* IDSEL 0x15 */
+				a800 0 0 1 40000 3b 1
+				a800 0 0 2 40000 3b 1
+				a800 0 0 3 40000 3b 1
+				a800 0 0 4 40000 3b 1>;
+			interrupt-parent = <40000>;
+			interrupts = <09 2>;
+			bus-range = <0 0>;
+			ranges = <02000000 0 a0000000 a0000000 0 20000000
+				  01000000 0 00000000 e3000000 0 00100000>;
+			clock-frequency = <3f940aa>;
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			reg = <9000 1000>;
+			compatible = "85xx";
+			device_type = "pci";
+		};
+
+		pic@40000 {
+			linux,phandle = <40000>;
+			clock-frequency = <0>;
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <40000 40000>;
+			built-in;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+                        big-endian;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/mpc8555cds.dts b/arch/powerpc/boot/dts/mpc8555cds.dts
new file mode 100644
index 00000000000..118f5a88765
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc8555cds.dts
@@ -0,0 +1,244 @@
+/*
+ * MPC8555 CDS Device Tree Source
+ *
+ * Copyright 2006 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+
+/ {
+	model = "MPC8555CDS";
+	compatible = "MPC85xxCDS";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	linux,phandle = <100>;
+
+	cpus {
+		#cpus = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		linux,phandle = <200>;
+
+		PowerPC,8555@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <20>;	// 32 bytes
+			i-cache-line-size = <20>;	// 32 bytes
+			d-cache-size = <8000>;		// L1, 32K
+			i-cache-size = <8000>;		// L1, 32K
+			timebase-frequency = <0>;	//  33 MHz, from uboot
+			bus-frequency = <0>;	// 166 MHz
+			clock-frequency = <0>;	// 825 MHz, from uboot
+			32-bit;
+			linux,phandle = <201>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		linux,phandle = <300>;
+		reg = <00000000 08000000>;	// 128M at 0x0
+	};
+
+	soc8555@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		#interrupt-cells = <2>;
+		device_type = "soc";
+		ranges = <0 e0000000 00100000>;
+		reg = <e0000000 00100000>;	// CCSRBAR 1M
+		bus-frequency = <0>;
+
+		i2c@3000 {
+			device_type = "i2c";
+			compatible = "fsl-i2c";
+			reg = <3000 100>;
+			interrupts = <1b 2>;
+			interrupt-parent = <40000>;
+			dfsrr;
+		};
+
+		mdio@24520 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			device_type = "mdio";
+			compatible = "gianfar";
+			reg = <24520 20>;
+			linux,phandle = <24520>;
+			ethernet-phy@0 {
+				linux,phandle = <2452000>;
+				interrupt-parent = <40000>;
+				interrupts = <35 0>;
+				reg = <0>;
+				device_type = "ethernet-phy";
+			};
+			ethernet-phy@1 {
+				linux,phandle = <2452001>;
+				interrupt-parent = <40000>;
+				interrupts = <35 0>;
+				reg = <1>;
+				device_type = "ethernet-phy";
+			};
+		};
+
+		ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <24000 1000>;
+			local-mac-address = [ 00 E0 0C 00 73 00 ];
+			interrupts = <0d 2 0e 2 12 2>;
+			interrupt-parent = <40000>;
+			phy-handle = <2452000>;
+		};
+
+		ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <25000 1000>;
+			local-mac-address = [ 00 E0 0C 00 73 01 ];
+			interrupts = <13 2 14 2 18 2>;
+			interrupt-parent = <40000>;
+			phy-handle = <2452001>;
+		};
+
+		serial@4500 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <4500 100>; 	// reg base, size
+			clock-frequency = <0>; 	// should we fill in in uboot?
+			interrupts = <1a 2>;
+			interrupt-parent = <40000>;
+		};
+
+		serial@4600 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <4600 100>;	// reg base, size
+			clock-frequency = <0>; 	// should we fill in in uboot?
+			interrupts = <1a 2>;
+			interrupt-parent = <40000>;
+		};
+
+		pci@8000 {
+			linux,phandle = <8000>;
+			interrupt-map-mask = <1f800 0 0 7>;
+			interrupt-map = <
+
+				/* IDSEL 0x10 */
+				08000 0 0 1 40000 30 1
+				08000 0 0 2 40000 31 1
+				08000 0 0 3 40000 32 1
+				08000 0 0 4 40000 33 1
+
+				/* IDSEL 0x11 */
+				08800 0 0 1 40000 30 1
+				08800 0 0 2 40000 31 1
+				08800 0 0 3 40000 32 1
+				08800 0 0 4 40000 33 1
+
+				/* IDSEL 0x12 (Slot 1) */
+				09000 0 0 1 40000 30 1
+				09000 0 0 2 40000 31 1
+				09000 0 0 3 40000 32 1
+				09000 0 0 4 40000 33 1
+
+				/* IDSEL 0x13 (Slot 2) */
+				09800 0 0 1 40000 31 1
+				09800 0 0 2 40000 32 1
+				09800 0 0 3 40000 33 1
+				09800 0 0 4 40000 30 1
+
+				/* IDSEL 0x14 (Slot 3) */
+				0a000 0 0 1 40000 32 1
+				0a000 0 0 2 40000 33 1
+				0a000 0 0 3 40000 30 1
+				0a000 0 0 4 40000 31 1
+
+				/* IDSEL 0x15 (Slot 4) */
+				0a800 0 0 1 40000 33 1
+				0a800 0 0 2 40000 30 1
+				0a800 0 0 3 40000 31 1
+				0a800 0 0 4 40000 32 1
+
+				/* Bus 1 (Tundra Bridge) */
+				/* IDSEL 0x12 (ISA bridge) */
+				19000 0 0 1 40000 30 1
+				19000 0 0 2 40000 31 1
+				19000 0 0 3 40000 32 1
+				19000 0 0 4 40000 33 1>;
+			interrupt-parent = <40000>;
+			interrupts = <08 2>;
+			bus-range = <0 0>;
+			ranges = <02000000 0 80000000 80000000 0 20000000
+				  01000000 0 00000000 e2000000 0 00100000>;
+			clock-frequency = <3f940aa>;
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			reg = <8000 1000>;
+			compatible = "85xx";
+			device_type = "pci";
+
+			i8259@19000 {
+				clock-frequency = <0>;
+				interrupt-controller;
+				device_type = "interrupt-controller";
+				reg = <19000 0 0 0 1>;
+				#address-cells = <0>;
+				#interrupt-cells = <2>;
+				built-in;
+				compatible = "chrp,iic";
+				big-endian;
+				interrupts = <1>;
+				interrupt-parent = <8000>;
+			};
+		};
+
+		pci@9000 {
+			linux,phandle = <9000>;
+			interrupt-map-mask = <f800 0 0 7>;
+			interrupt-map = <
+
+				/* IDSEL 0x15 */
+				a800 0 0 1 40000 3b 1
+				a800 0 0 2 40000 3b 1
+				a800 0 0 3 40000 3b 1
+				a800 0 0 4 40000 3b 1>;
+			interrupt-parent = <40000>;
+			interrupts = <09 2>;
+			bus-range = <0 0>;
+			ranges = <02000000 0 a0000000 a0000000 0 20000000
+				  01000000 0 00000000 e3000000 0 00100000>;
+			clock-frequency = <3f940aa>;
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			reg = <9000 1000>;
+			compatible = "85xx";
+			device_type = "pci";
+		};
+
+		pic@40000 {
+			linux,phandle = <40000>;
+			clock-frequency = <0>;
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <40000 40000>;
+			built-in;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+                        big-endian;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/mpc8641_hpcn.dts b/arch/powerpc/boot/dts/mpc8641_hpcn.dts
new file mode 100644
index 00000000000..f0c7731743e
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc8641_hpcn.dts
@@ -0,0 +1,339 @@
+/*
+ * MPC8641 HPCN Device Tree Source
+ *
+ * Copyright 2006 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+
+/ {
+	model = "MPC8641HPCN";
+	compatible = "mpc86xx";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#cpus = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8641@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <20>;	// 32 bytes
+			i-cache-line-size = <20>;	// 32 bytes
+			d-cache-size = <8000>;		// L1, 32K
+			i-cache-size = <8000>;		// L1, 32K
+			timebase-frequency = <0>;	// 33 MHz, from uboot
+			bus-frequency = <0>;		// From uboot
+			clock-frequency = <0>;		// From uboot
+			32-bit;
+			linux,boot-cpu;
+		};
+		PowerPC,8641@1 {
+			device_type = "cpu";
+			reg = <1>;
+			d-cache-line-size = <20>;	// 32 bytes
+			i-cache-line-size = <20>;	// 32 bytes
+			d-cache-size = <8000>;		// L1, 32K
+			i-cache-size = <8000>;		// L1, 32K
+			timebase-frequency = <0>;	// 33 MHz, from uboot
+			bus-frequency = <0>;		// From uboot
+			clock-frequency = <0>;		// From uboot
+			32-bit;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <00000000 40000000>;	// 1G at 0x0
+	};
+
+	soc8641@f8000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		#interrupt-cells = <2>;
+		device_type = "soc";
+		ranges = <0 f8000000 00100000>;
+		reg = <f8000000 00100000>;	// CCSRBAR 1M
+		bus-frequency = <0>;
+
+		i2c@3000 {
+			device_type = "i2c";
+			compatible = "fsl-i2c";
+			reg = <3000 100>;
+			interrupts = <2b 2>;
+			interrupt-parent = <40000>;
+			dfsrr;
+		};
+
+		i2c@3100 {
+			device_type = "i2c";
+			compatible = "fsl-i2c";
+			reg = <3100 100>;
+			interrupts = <2b 2>;
+			interrupt-parent = <40000>;
+			dfsrr;
+		};
+
+		mdio@24520 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			device_type = "mdio";
+			compatible = "gianfar";
+			reg = <24520 20>;
+			linux,phandle = <24520>;
+			ethernet-phy@0 {
+				linux,phandle = <2452000>;
+				interrupt-parent = <40000>;
+				interrupts = <4a 1>;
+				reg = <0>;
+				device_type = "ethernet-phy";
+			};
+			ethernet-phy@1 {
+				linux,phandle = <2452001>;
+				interrupt-parent = <40000>;
+				interrupts = <4a 1>;
+				reg = <1>;
+				device_type = "ethernet-phy";
+			};
+			ethernet-phy@2 {
+				linux,phandle = <2452002>;
+				interrupt-parent = <40000>;
+				interrupts = <4a 1>;
+				reg = <2>;
+				device_type = "ethernet-phy";
+			};
+			ethernet-phy@3 {
+				linux,phandle = <2452003>;
+				interrupt-parent = <40000>;
+				interrupts = <4a 1>;
+				reg = <3>;
+				device_type = "ethernet-phy";
+			};
+		};
+
+		ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <24000 1000>;
+			mac-address = [ 00 E0 0C 00 73 00 ];
+			interrupts = <1d 2 1e 2 22 2>;
+			interrupt-parent = <40000>;
+			phy-handle = <2452000>;
+		};
+
+		ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <25000 1000>;
+			mac-address = [ 00 E0 0C 00 73 01 ];
+			interrupts = <23 2 24 2 28 2>;
+			interrupt-parent = <40000>;
+			phy-handle = <2452001>;
+		};
+		
+		ethernet@26000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <26000 1000>;
+			mac-address = [ 00 E0 0C 00 02 FD ];
+			interrupts = <1F 2 20 2 21 2>;
+			interrupt-parent = <40000>;
+			phy-handle = <2452002>;
+		};
+
+		ethernet@27000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <27000 1000>;
+			mac-address = [ 00 E0 0C 00 03 FD ];
+			interrupts = <25 2 26 2 27 2>;
+			interrupt-parent = <40000>;
+			phy-handle = <2452003>;
+		};
+		serial@4500 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <4500 100>;
+			clock-frequency = <0>;
+			interrupts = <2a 2>;
+			interrupt-parent = <40000>;
+		};
+
+		serial@4600 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <4600 100>;
+			clock-frequency = <0>;
+			interrupts = <1c 2>;
+			interrupt-parent = <40000>;
+		};
+
+		pci@8000 {
+			compatible = "86xx";
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			reg = <8000 1000>;
+			bus-range = <0 fe>;
+			ranges = <02000000 0 80000000 80000000 0 20000000
+				  01000000 0 00000000 e2000000 0 00100000>;
+			clock-frequency = <1fca055>;
+			interrupt-parent = <40000>;
+			interrupts = <18 2>;
+			interrupt-map-mask = <f800 0 0 7>;
+			interrupt-map = <
+				/* IDSEL 0x11 */
+				8800 0 0 1 4d0 3 2
+				8800 0 0 2 4d0 4 2
+				8800 0 0 3 4d0 5 2
+				8800 0 0 4 4d0 6 2
+
+				/* IDSEL 0x12 */
+				9000 0 0 1 4d0 4 2
+				9000 0 0 2 4d0 5 2
+				9000 0 0 3 4d0 6 2
+				9000 0 0 4 4d0 3 2
+
+				/* IDSEL 0x13 */
+				9800 0 0 1 4d0 0 0
+				9800 0 0 2 4d0 0 0
+				9800 0 0 3 4d0 0 0
+				9800 0 0 4 4d0 0 0
+
+				/* IDSEL 0x14 */
+				a000 0 0 1 4d0 0 0
+				a000 0 0 2 4d0 0 0
+				a000 0 0 3 4d0 0 0
+				a000 0 0 4 4d0 0 0
+
+				/* IDSEL 0x15 */
+				a800 0 0 1 4d0 0 0
+				a800 0 0 2 4d0 0 0
+				a800 0 0 3 4d0 0 0
+				a800 0 0 4 4d0 0 0
+
+				/* IDSEL 0x16 */
+				b000 0 0 1 4d0 0 0
+				b000 0 0 2 4d0 0 0
+				b000 0 0 3 4d0 0 0
+				b000 0 0 4 4d0 0 0
+
+				/* IDSEL 0x17 */
+				b800 0 0 1 4d0 0 0
+				b800 0 0 2 4d0 0 0
+				b800 0 0 3 4d0 0 0
+				b800 0 0 4 4d0 0 0
+
+				/* IDSEL 0x18 */
+				c000 0 0 1 4d0 0 0
+				c000 0 0 2 4d0 0 0
+				c000 0 0 3 4d0 0 0
+				c000 0 0 4 4d0 0 0
+
+				/* IDSEL 0x19 */
+				c800 0 0 1 4d0 0 0
+				c800 0 0 2 4d0 0 0
+				c800 0 0 3 4d0 0 0
+				c800 0 0 4 4d0 0 0
+
+				/* IDSEL 0x1a */
+				d000 0 0 1 4d0 6 2
+				d000 0 0 2 4d0 3 2
+				d000 0 0 3 4d0 4 2
+				d000 0 0 4 4d0 5 2
+
+
+				/* IDSEL 0x1b */
+				d800 0 0 1 4d0 5 2
+				d800 0 0 2 4d0 0 0
+				d800 0 0 3 4d0 0 0
+				d800 0 0 4 4d0 0 0
+
+				/* IDSEL 0x1c */
+				e000 0 0 1 4d0 9 2
+				e000 0 0 2 4d0 a 2
+				e000 0 0 3 4d0 c 2
+				e000 0 0 4 4d0 7 2
+
+				/* IDSEL 0x1d */
+				e800 0 0 1 4d0 9 2
+				e800 0 0 2 4d0 a 2
+				e800 0 0 3 4d0 b 2
+				e800 0 0 4 4d0 0 0
+
+				/* IDSEL 0x1e */
+				f000 0 0 1 4d0 c 2
+				f000 0 0 2 4d0 0 0
+				f000 0 0 3 4d0 0 0
+				f000 0 0 4 4d0 0 0
+
+				/* IDSEL 0x1f */
+				f800 0 0 1 4d0 6 2
+				f800 0 0 2 4d0 0 0
+				f800 0 0 3 4d0 0 0
+				f800 0 0 4 4d0 0 0
+				>;
+			i8259@4d0 {
+				linux,phandle = <4d0>;
+				clock-frequency = <0>;
+				interrupt-controller;
+				device_type = "interrupt-controller";
+				#address-cells = <0>;
+				#interrupt-cells = <2>;
+				built-in;
+				compatible = "chrp,iic";
+                	        big-endian;
+				interrupts = <49 2>;
+				interrupt-parent = <40000>;
+			};
+
+		};
+		pic@40000 {
+			linux,phandle = <40000>;
+			clock-frequency = <0>;
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <40000 40000>;
+			built-in;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+                        big-endian;
+			interrupts = <
+				10 2 11 2 12 2 13 2
+				14 2 15 2 16 2 17 2
+				18 2 19 2 1a 2 1b 2
+				1c 2 1d 2 1e 2 1f 2
+				20 2 21 2 22 2 23 2
+				24 2 25 2 26 2 27 2
+				28 2 29 2 2a 2 2b 2
+				2c 2 2d 2 2e 2 2f 2
+				30 2 31 2 32 2 33 2
+				34 2 35 2 36 2 37 2
+				38 2 39 2 2a 2 3b 2
+				3c 2 3d 2 3e 2 3f 2
+				48 1 49 2 4a 1
+				>;
+			interrupt-parent = <40000>;
+		};
+	};
+};