powerpc/85xx: Simplify P1020RDB CAMP dts using includes

If we include the p1020rdb.dts instead of p1020si.dts we greatly reduce
duplication and maintenance.  We can just list which devices are
disabled for the given core and mpic protected sources.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

2 files changed, 4 insertions, 161 deletions

diff --git a/arch/powerpc/boot/dts/p1020rdb_camp_core0.dts b/arch/powerpc/boot/dts/p1020rdb_camp_core0.dts
index f0bf7f42f09..41b4585c5da 100644
--- a/arch/powerpc/boot/dts/p1020rdb_camp_core0.dts
+++ b/arch/powerpc/boot/dts/p1020rdb_camp_core0.dts
@@ -16,7 +16,7 @@
  * option) any later version.
  */
 
-/include/ "p1020si.dtsi"
+/include/ "p1020rdb.dts"
 
 / {
 	model = "fsl,P1020RDB";
@@ -32,7 +32,7 @@
 
 	cpus {
 		PowerPC,P1020@1 {
-		status = "disabled";
+			status = "disabled";
 		};
 	};
 
@@ -45,169 +45,19 @@
 	};
 
 	soc@ffe00000 {
-		i2c@3000 {
-			rtc@68 {
-				compatible = "dallas,ds1339";
-				reg = <0x68>;
-			};
-		};
-
 		serial1: serial@4600 {
 			status = "disabled";
 		};
 
-		spi@7000 {
-			fsl_m25p80@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "fsl,espi-flash";
-				reg = <0>;
-				linux,modalias = "fsl_m25p80";
-				spi-max-frequency = <40000000>;
-
-				partition@0 {
-					/* 512KB for u-boot Bootloader Image */
-					reg = <0x0 0x00080000>;
-					label = "SPI (RO) U-Boot Image";
-					read-only;
-				};
-
-				partition@80000 {
-					/* 512KB for DTB Image */
-					reg = <0x00080000 0x00080000>;
-					label = "SPI (RO) DTB Image";
-					read-only;
-				};
-
-				partition@100000 {
-					/* 4MB for Linux Kernel Image */
-					reg = <0x00100000 0x00400000>;
-					label = "SPI (RO) Linux Kernel Image";
-					read-only;
-				};
-
-				partition@500000 {
-					/* 4MB for Compressed RFS Image */
-					reg = <0x00500000 0x00400000>;
-					label = "SPI (RO) Compressed RFS Image";
-					read-only;
-				};
-
-				partition@900000 {
-					/* 7MB for JFFS2 based RFS */
-					reg = <0x00900000 0x00700000>;
-					label = "SPI (RW) JFFS2 RFS";
-				};
-			};
-		};
-
-		mdio@24000 {
-			phy0: ethernet-phy@0 {
-				interrupt-parent = <&mpic>;
-				interrupts = <3 1>;
-				reg = <0x0>;
-			};
-			phy1: ethernet-phy@1 {
-				interrupt-parent = <&mpic>;
-				interrupts = <2 1>;
-				reg = <0x1>;
-			};
-		};
-
-		mdio@25000 {
-			tbi0: tbi-phy@11 {
-				reg = <0x11>;
-				device_type = "tbi-phy";
-			};
-		};
-
 		enet0: ethernet@b0000 {
 			status = "disabled";
 		};
 
-		enet1: ethernet@b1000 {
-			phy-handle = <&phy0>;
-			tbi-handle = <&tbi0>;
-			phy-connection-type = "sgmii";
-		};
-
-		enet2: ethernet@b2000 {
-			phy-handle = <&phy1>;
-			phy-connection-type = "rgmii-id";
-		};
-
-		usb@22000 {
-			phy_type = "ulpi";
-		};
-
-		/* USB2 is shared with localbus, so it must be disabled
-		   by default. We can't put 'status = "disabled";' here
-		   since U-Boot doesn't clear the status property when
-		   it enables USB2. OTOH, U-Boot does create a new node
-		   when there isn't any. So, just comment it out.
-		usb@23000 {
-			phy_type = "ulpi";
-		};
-		*/
-
 		mpic: pic@40000 {
 			protected-sources = <
 			42 29 30 34	/* serial1, enet0-queue-group0 */
 			17 18 24 45	/* enet0-queue-group1, crypto */
 			>;
 		};
-
-	};
-
-	pci0: pcie@ffe09000 {
-		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
-		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			0000 0x0 0x0 0x1 &mpic 0x4 0x1
-			0000 0x0 0x0 0x2 &mpic 0x5 0x1
-			0000 0x0 0x0 0x3 &mpic 0x6 0x1
-			0000 0x0 0x0 0x4 &mpic 0x7 0x1
-			>;
-		pcie@0 {
-			reg = <0x0 0x0 0x0 0x0 0x0>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			device_type = "pci";
-			ranges = <0x2000000 0x0 0xa0000000
-				  0x2000000 0x0 0xa0000000
-				  0x0 0x20000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x100000>;
-		};
-	};
-
-	pci1: pcie@ffe0a000 {
-		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
-		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			0000 0x0 0x0 0x1 &mpic 0x0 0x1
-			0000 0x0 0x0 0x2 &mpic 0x1 0x1
-			0000 0x0 0x0 0x3 &mpic 0x2 0x1
-			0000 0x0 0x0 0x4 &mpic 0x3 0x1
-			>;
-		pcie@0 {
-			reg = <0x0 0x0 0x0 0x0 0x0>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			device_type = "pci";
-			ranges = <0x2000000 0x0 0x80000000
-				  0x2000000 0x0 0x80000000
-				  0x0 0x20000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x100000>;
-		};
 	};
 };
diff --git a/arch/powerpc/boot/dts/p1020rdb_camp_core1.dts b/arch/powerpc/boot/dts/p1020rdb_camp_core1.dts
index 6ec02204a44..51745382188 100644
--- a/arch/powerpc/boot/dts/p1020rdb_camp_core1.dts
+++ b/arch/powerpc/boot/dts/p1020rdb_camp_core1.dts
@@ -15,7 +15,7 @@
  * option) any later version.
  */
 
-/include/ "p1020si.dtsi"
+/include/ "p1020rdb.dts"
 
 / {
 	model = "fsl,P1020RDB";
@@ -28,7 +28,7 @@
 
 	cpus {
 		PowerPC,P1020@0 {
-		status = "disabled";
+			status = "disabled";
 		};
 	};
 
@@ -85,12 +85,6 @@
 			status = "disabled";
 		};
 
-		enet0: ethernet@b0000 {
-			fixed-link = <1 1 1000 0 0>;
-			phy-connection-type = "rgmii-id";
-
-		};
-
 		enet1: ethernet@b1000 {
 			status = "disabled";
 		};
@@ -135,7 +129,6 @@
 		global-utilities@e0000 {	//global utilities block
 			status = "disabled";
 		};
-
 	};
 
 	pci0: pcie@ffe09000 {