Merge branch 'for-2.6.36' into for-2.6.37

Fairly simple conflicts, the most serious ones are the i.MX ones which I
suspect now need another rename.

Conflicts:
	arch/arm/mach-mx2/clock_imx27.c
	arch/arm/mach-mx2/devices.c
	arch/arm/mach-omap2/board-rx51-peripherals.c
	arch/arm/mach-omap2/board-zoom2.c
	sound/soc/fsl/mpc5200_dma.c
	sound/soc/fsl/mpc5200_dma.h
	sound/soc/fsl/mpc8610_hpcd.c
	sound/soc/pxa/spitz.c

32 files changed, 3288 insertions, 355 deletions

diff --git a/arch/powerpc/boot/4xx.c b/arch/powerpc/boot/4xx.c
index 27db8938827..9d3bd4c45a2 100644
--- a/arch/powerpc/boot/4xx.c
+++ b/arch/powerpc/boot/4xx.c
@@ -519,7 +519,7 @@ void ibm440ep_fixup_clocks(unsigned int sys_clk,
 {
 	unsigned int plb_clk = __ibm440eplike_fixup_clocks(sys_clk, tmr_clk, 0);
 
-	/* serial clocks beed fixup based on int/ext */
+	/* serial clocks need fixup based on int/ext */
 	eplike_fixup_uart_clk(0, "/plb/opb/serial@ef600300", ser_clk, plb_clk);
 	eplike_fixup_uart_clk(1, "/plb/opb/serial@ef600400", ser_clk, plb_clk);
 	eplike_fixup_uart_clk(2, "/plb/opb/serial@ef600500", ser_clk, plb_clk);
@@ -532,7 +532,7 @@ void ibm440gx_fixup_clocks(unsigned int sys_clk,
 {
 	unsigned int plb_clk = __ibm440eplike_fixup_clocks(sys_clk, tmr_clk, 1);
 
-	/* serial clocks beed fixup based on int/ext */
+	/* serial clocks need fixup based on int/ext */
 	eplike_fixup_uart_clk(0, "/plb/opb/serial@40000200", ser_clk, plb_clk);
 	eplike_fixup_uart_clk(1, "/plb/opb/serial@40000300", ser_clk, plb_clk);
 }
@@ -543,10 +543,10 @@ void ibm440spe_fixup_clocks(unsigned int sys_clk,
 {
 	unsigned int plb_clk = __ibm440eplike_fixup_clocks(sys_clk, tmr_clk, 1);
 
-	/* serial clocks beed fixup based on int/ext */
-	eplike_fixup_uart_clk(0, "/plb/opb/serial@10000200", ser_clk, plb_clk);
-	eplike_fixup_uart_clk(1, "/plb/opb/serial@10000300", ser_clk, plb_clk);
-	eplike_fixup_uart_clk(2, "/plb/opb/serial@10000600", ser_clk, plb_clk);
+	/* serial clocks need fixup based on int/ext */
+	eplike_fixup_uart_clk(0, "/plb/opb/serial@f0000200", ser_clk, plb_clk);
+	eplike_fixup_uart_clk(1, "/plb/opb/serial@f0000300", ser_clk, plb_clk);
+	eplike_fixup_uart_clk(2, "/plb/opb/serial@f0000600", ser_clk, plb_clk);
 }
 
 void ibm405gp_fixup_clocks(unsigned int sys_clk, unsigned int ser_clk)
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index ad0df7d0a64..fae8192c8fc 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -141,7 +141,7 @@ $(patsubst %.S,%.o, $(filter %.S, $(src-boot))): %.o: %.S FORCE
 $(obj)/wrapper.a: $(obj-wlib) FORCE
 	$(call if_changed,bootar)
 
-hostprogs-y	:= addnote addRamDisk hack-coff mktree
+hostprogs-y	:= addnote hack-coff mktree
 
 targets		+= $(patsubst $(obj)/%,%,$(obj-boot) wrapper.a)
 extra-y		:= $(obj)/wrapper.a $(obj-plat) $(obj)/empty.o \
diff --git a/arch/powerpc/boot/addRamDisk.c b/arch/powerpc/boot/addRamDisk.c
deleted file mode 100644
index 893f446cbd2..00000000000
--- a/arch/powerpc/boot/addRamDisk.c
+++ /dev/null
@@ -1,311 +0,0 @@
-#include <stdio.h>
-#include <stdlib.h>
-#include <netinet/in.h>
-#include <unistd.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <string.h>
-#include <elf.h>
-
-#define ElfHeaderSize  (64 * 1024)
-#define ElfPages  (ElfHeaderSize / 4096)
-#define KERNELBASE (0xc000000000000000)
-#define _ALIGN_UP(addr,size)	(((addr)+((size)-1))&(~((size)-1)))
-
-struct addr_range {
-	unsigned long long addr;
-	unsigned long memsize;
-	unsigned long offset;
-};
-
-static int check_elf64(void *p, int size, struct addr_range *r)
-{
-	Elf64_Ehdr *elf64 = p;
-	Elf64_Phdr *elf64ph;
-
-	if (elf64->e_ident[EI_MAG0] != ELFMAG0 ||
-	    elf64->e_ident[EI_MAG1] != ELFMAG1 ||
-	    elf64->e_ident[EI_MAG2] != ELFMAG2 ||
-	    elf64->e_ident[EI_MAG3] != ELFMAG3 ||
-	    elf64->e_ident[EI_CLASS] != ELFCLASS64 ||
-	    elf64->e_ident[EI_DATA] != ELFDATA2MSB ||
-	    elf64->e_type != ET_EXEC || elf64->e_machine != EM_PPC64)
-		return 0;
-
-	if ((elf64->e_phoff + sizeof(Elf64_Phdr)) > size)
-		return 0;
-
-	elf64ph = (Elf64_Phdr *) ((unsigned long)elf64 +
-				  (unsigned long)elf64->e_phoff);
-
-	r->memsize = (unsigned long)elf64ph->p_memsz;
-	r->offset = (unsigned long)elf64ph->p_offset;
-	r->addr = (unsigned long long)elf64ph->p_vaddr;
-
-#ifdef DEBUG
-	printf("PPC64 ELF file, ph:\n");
-	printf("p_type   0x%08x\n", elf64ph->p_type);
-	printf("p_flags  0x%08x\n", elf64ph->p_flags);
-	printf("p_offset 0x%016llx\n", elf64ph->p_offset);
-	printf("p_vaddr  0x%016llx\n", elf64ph->p_vaddr);
-	printf("p_paddr  0x%016llx\n", elf64ph->p_paddr);
-	printf("p_filesz 0x%016llx\n", elf64ph->p_filesz);
-	printf("p_memsz  0x%016llx\n", elf64ph->p_memsz);
-	printf("p_align  0x%016llx\n", elf64ph->p_align);
-	printf("... skipping 0x%08lx bytes of ELF header\n",
-	       (unsigned long)elf64ph->p_offset);
-#endif
-
-	return 64;
-}
-static void get4k(FILE *file, char *buf )
-{
-	unsigned j;
-	unsigned num = fread(buf, 1, 4096, file);
-	for ( j=num; j<4096; ++j )
-		buf[j] = 0;
-}
-
-static void put4k(FILE *file, char *buf )
-{
-	fwrite(buf, 1, 4096, file);
-}
-
-static void death(const char *msg, FILE *fdesc, const char *fname)
-{
-	fprintf(stderr, msg);
-	fclose(fdesc);
-	unlink(fname);
-	exit(1);
-}
-
-int main(int argc, char **argv)
-{
-	char inbuf[4096];
-	struct addr_range vmlinux;
-	FILE *ramDisk;
-	FILE *inputVmlinux;
-	FILE *outputVmlinux;
-
-	char *rd_name, *lx_name, *out_name;
-
-	size_t i;
-	unsigned long ramFileLen;
-	unsigned long ramLen;
-	unsigned long roundR;
-	unsigned long offset_end;
-
-	unsigned long kernelLen;
-	unsigned long actualKernelLen;
-	unsigned long round;
-	unsigned long roundedKernelLen;
-	unsigned long ramStartOffs;
-	unsigned long ramPages;
-	unsigned long roundedKernelPages;
-	unsigned long hvReleaseData;
-	u_int32_t eyeCatcher = 0xc8a5d9c4;
-	unsigned long naca;
-	unsigned long xRamDisk;
-	unsigned long xRamDiskSize;
-	long padPages;
-  
-  
-	if (argc < 2) {
-		fprintf(stderr, "Name of RAM disk file missing.\n");
-		exit(1);
-	}
-	rd_name = argv[1];
-
-	if (argc < 3) {
-		fprintf(stderr, "Name of vmlinux file missing.\n");
-		exit(1);
-	}
-	lx_name = argv[2];
-
-	if (argc < 4) {
-		fprintf(stderr, "Name of vmlinux output file missing.\n");
-		exit(1);
-	}
-	out_name = argv[3];
-
-
-	ramDisk = fopen(rd_name, "r");
-	if ( ! ramDisk ) {
-		fprintf(stderr, "RAM disk file \"%s\" failed to open.\n", rd_name);
-		exit(1);
-	}
-
-	inputVmlinux = fopen(lx_name, "r");
-	if ( ! inputVmlinux ) {
-		fprintf(stderr, "vmlinux file \"%s\" failed to open.\n", lx_name);
-		exit(1);
-	}
-  
-	outputVmlinux = fopen(out_name, "w+");
-	if ( ! outputVmlinux ) {
-		fprintf(stderr, "output vmlinux file \"%s\" failed to open.\n", out_name);
-		exit(1);
-	}
-
-	i = fread(inbuf, 1, sizeof(inbuf), inputVmlinux);
-	if (i != sizeof(inbuf)) {
-		fprintf(stderr, "can not read vmlinux file %s: %u\n", lx_name, i);
-		exit(1);
-	}
-
-	i = check_elf64(inbuf, sizeof(inbuf), &vmlinux);
-	if (i == 0) {
-		fprintf(stderr, "You must have a linux kernel specified as argv[2]\n");
-		exit(1);
-	}
-
-	/* Input Vmlinux file */
-	fseek(inputVmlinux, 0, SEEK_END);
-	kernelLen = ftell(inputVmlinux);
-	fseek(inputVmlinux, 0, SEEK_SET);
-	printf("kernel file size = %lu\n", kernelLen);
-
-	actualKernelLen = kernelLen - ElfHeaderSize;
-
-	printf("actual kernel length (minus ELF header) = %lu\n", actualKernelLen);
-
-	round = actualKernelLen % 4096;
-	roundedKernelLen = actualKernelLen;
-	if ( round )
-		roundedKernelLen += (4096 - round);
-	printf("Vmlinux length rounded up to a 4k multiple = %ld/0x%lx \n", roundedKernelLen, roundedKernelLen);
-	roundedKernelPages = roundedKernelLen / 4096;
-	printf("Vmlinux pages to copy = %ld/0x%lx \n", roundedKernelPages, roundedKernelPages);
-
-	offset_end = _ALIGN_UP(vmlinux.memsize, 4096);
-	/* calc how many pages we need to insert between the vmlinux and the start of the ram disk */
-	padPages = offset_end/4096 - roundedKernelPages;
-
-	/* Check and see if the vmlinux is already larger than _end in System.map */
-	if (padPages < 0) {
-		/* vmlinux is larger than _end - adjust the offset to the start of the embedded ram disk */ 
-		offset_end = roundedKernelLen;
-		printf("vmlinux is larger than _end indicates it needs to be - offset_end = %lx \n", offset_end);
-		padPages = 0;
-		printf("will insert %lx pages between the vmlinux and the start of the ram disk \n", padPages);
-	}
-	else {
-		/* _end is larger than vmlinux - use the offset to _end that we calculated from the system map */
-		printf("vmlinux is smaller than _end indicates is needed - offset_end = %lx \n", offset_end);
-		printf("will insert %lx pages between the vmlinux and the start of the ram disk \n", padPages);
-	}
-
-
-
-	/* Input Ram Disk file */
-	// Set the offset that the ram disk will be started at.
-	ramStartOffs = offset_end;  /* determined from the input vmlinux file and the system map */
-	printf("Ram Disk will start at offset = 0x%lx \n", ramStartOffs);
-  
-	fseek(ramDisk, 0, SEEK_END);
-	ramFileLen = ftell(ramDisk);
-	fseek(ramDisk, 0, SEEK_SET);
-	printf("%s file size = %ld/0x%lx \n", rd_name, ramFileLen, ramFileLen);
-
-	ramLen = ramFileLen;
-
-	roundR = 4096 - (ramLen % 4096);
-	if ( roundR ) {
-		printf("Rounding RAM disk file up to a multiple of 4096, adding %ld/0x%lx \n", roundR, roundR);
-		ramLen += roundR;
-	}
-
-	printf("Rounded RAM disk size is %ld/0x%lx \n", ramLen, ramLen);
-	ramPages = ramLen / 4096;
-	printf("RAM disk pages to copy = %ld/0x%lx\n", ramPages, ramPages);
-
-
-
-  // Copy 64K ELF header
-	for (i=0; i<(ElfPages); ++i) {
-		get4k( inputVmlinux, inbuf );
-		put4k( outputVmlinux, inbuf );
-	}
-
-	/* Copy the vmlinux (as full pages). */
-	fseek(inputVmlinux, ElfHeaderSize, SEEK_SET);
-	for ( i=0; i<roundedKernelPages; ++i ) {
-		get4k( inputVmlinux, inbuf );
-		put4k( outputVmlinux, inbuf );
-	}
-  
-	/* Insert pad pages (if appropriate) that are needed between */
-	/* | the end of the vmlinux and the ram disk. */
-	for (i=0; i<padPages; ++i) {
-		memset(inbuf, 0, 4096);
-		put4k(outputVmlinux, inbuf);
-	}
-
-	/* Copy the ram disk (as full pages). */
-	for ( i=0; i<ramPages; ++i ) {
-		get4k( ramDisk, inbuf );
-		put4k( outputVmlinux, inbuf );
-	}
-
-	/* Close the input files */
-	fclose(ramDisk);
-	fclose(inputVmlinux);
-	/* And flush the written output file */
-	fflush(outputVmlinux);
-
-
-
-	/* Fixup the new vmlinux to contain the ram disk starting offset (xRamDisk) and the ram disk size (xRamDiskSize) */
-	/* fseek to the hvReleaseData pointer */
-	fseek(outputVmlinux, ElfHeaderSize + 0x24, SEEK_SET);
-	if (fread(&hvReleaseData, 4, 1, outputVmlinux) != 1) {
-		death("Could not read hvReleaseData pointer\n", outputVmlinux, out_name);
-	}
-	hvReleaseData = ntohl(hvReleaseData); /* Convert to native int */
-	printf("hvReleaseData is at %08lx\n", hvReleaseData);
-
-	/* fseek to the hvReleaseData */
-	fseek(outputVmlinux, ElfHeaderSize + hvReleaseData, SEEK_SET);
-	if (fread(inbuf, 0x40, 1, outputVmlinux) != 1) {
-		death("Could not read hvReleaseData\n", outputVmlinux, out_name);
-	}
-	/* Check hvReleaseData sanity */
-	if (memcmp(inbuf, &eyeCatcher, 4) != 0) {
-		death("hvReleaseData is invalid\n", outputVmlinux, out_name);
-	}
-	/* Get the naca pointer */
-	naca = ntohl(*((u_int32_t*) &inbuf[0x0C])) - KERNELBASE;
-	printf("Naca is at offset 0x%lx \n", naca);
-
-	/* fseek to the naca */
-	fseek(outputVmlinux, ElfHeaderSize + naca, SEEK_SET);
-	if (fread(inbuf, 0x18, 1, outputVmlinux) != 1) {
-		death("Could not read naca\n", outputVmlinux, out_name);
-	}
-	xRamDisk = ntohl(*((u_int32_t *) &inbuf[0x0c]));
-	xRamDiskSize = ntohl(*((u_int32_t *) &inbuf[0x14]));
-	/* Make sure a RAM disk isn't already present */
-	if ((xRamDisk != 0) || (xRamDiskSize != 0)) {
-		death("RAM disk is already attached to this kernel\n", outputVmlinux, out_name);
-	}
-	/* Fill in the values */
-	*((u_int32_t *) &inbuf[0x0c]) = htonl(ramStartOffs);
-	*((u_int32_t *) &inbuf[0x14]) = htonl(ramPages);
-
-	/* Write out the new naca */
-	fflush(outputVmlinux);
-	fseek(outputVmlinux, ElfHeaderSize + naca, SEEK_SET);
-	if (fwrite(inbuf, 0x18, 1, outputVmlinux) != 1) {
-		death("Could not write naca\n", outputVmlinux, out_name);
-	}
-	printf("Ram Disk of 0x%lx pages is attached to the kernel at offset 0x%08lx\n",
-	       ramPages, ramStartOffs);
-
-	/* Done */
-	fclose(outputVmlinux);
-	/* Set permission to executable */
-	chmod(out_name, S_IRUSR|S_IWUSR|S_IXUSR|S_IRGRP|S_IXGRP|S_IROTH|S_IXOTH);
-
-	return 0;
-}
-
diff --git a/arch/powerpc/boot/dts/canyonlands.dts b/arch/powerpc/boot/dts/canyonlands.dts
index cd56bb5b347..5806ef0b860 100644
--- a/arch/powerpc/boot/dts/canyonlands.dts
+++ b/arch/powerpc/boot/dts/canyonlands.dts
@@ -270,7 +270,7 @@
 				clock-frequency = <0>; /* Filled in by U-Boot */
 				current-speed = <0>; /* Filled in by U-Boot */
 				interrupt-parent = <&UIC1>;
-				interrupts = <0x1d 0x4>;
+				interrupts = <28 0x4>;
 			};
 
 			UART3: serial@ef600600 {
@@ -281,7 +281,7 @@
 				clock-frequency = <0>; /* Filled in by U-Boot */
 				current-speed = <0>; /* Filled in by U-Boot */
 				interrupt-parent = <&UIC1>;
-				interrupts = <0x1e 0x4>;
+				interrupts = <29 0x4>;
 			};
 
 			IIC0: i2c@ef600700 {
diff --git a/arch/powerpc/boot/dts/glacier.dts b/arch/powerpc/boot/dts/glacier.dts
index d62a4fb6f93..e618fc4cbc9 100644
--- a/arch/powerpc/boot/dts/glacier.dts
+++ b/arch/powerpc/boot/dts/glacier.dts
@@ -259,7 +259,7 @@
 				clock-frequency = <0>; /* Filled in by U-Boot */
 				current-speed = <0>; /* Filled in by U-Boot */
 				interrupt-parent = <&UIC1>;
-				interrupts = <0x1d 0x4>;
+				interrupts = <28 0x4>;
 			};
 
 			UART3: serial@ef600600 {
@@ -270,7 +270,7 @@
 				clock-frequency = <0>; /* Filled in by U-Boot */
 				current-speed = <0>; /* Filled in by U-Boot */
 				interrupt-parent = <&UIC1>;
-				interrupts = <0x1e 0x4>;
+				interrupts = <29 0x4>;
 			};
 
 			IIC0: i2c@ef600700 {
diff --git a/arch/powerpc/boot/dts/icon.dts b/arch/powerpc/boot/dts/icon.dts
new file mode 100644
index 00000000000..abcd0caecca
--- /dev/null
+++ b/arch/powerpc/boot/dts/icon.dts
@@ -0,0 +1,447 @@
+/*
+ * Device Tree Source for Mosaix Technologies, Inc. ICON board
+ *
+ * Copyright 2010 DENX Software Engineering, Stefan Roese <sr@denx.de>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	model = "mosaixtech,icon";
+	compatible = "mosaixtech,icon";
+	dcr-parent = <&{/cpus/cpu@0}>;
+
+	aliases {
+		ethernet0 = &EMAC0;
+		serial0 = &UART0;
+		serial1 = &UART1;
+		serial2 = &UART2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			model = "PowerPC,440SPe";
+			reg = <0x00000000>;
+			clock-frequency = <0>; /* Filled in by U-Boot */
+			timebase-frequency = <0>; /* Filled in by U-Boot */
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
+			dcr-controller;
+			dcr-access-method = "native";
+			reset-type = <2>;	/* Use chip-reset */
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x00000000 0x0 0x00000000>; /* Filled in by U-Boot */
+	};
+
+	UIC0: interrupt-controller0 {
+		compatible = "ibm,uic-440spe","ibm,uic";
+		interrupt-controller;
+		cell-index = <0>;
+		dcr-reg = <0x0c0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+	};
+
+	UIC1: interrupt-controller1 {
+		compatible = "ibm,uic-440spe","ibm,uic";
+		interrupt-controller;
+		cell-index = <1>;
+		dcr-reg = <0x0d0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	UIC2: interrupt-controller2 {
+		compatible = "ibm,uic-440spe","ibm,uic";
+		interrupt-controller;
+		cell-index = <2>;
+		dcr-reg = <0x0e0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0xa 0x4 0xb 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	UIC3: interrupt-controller3 {
+		compatible = "ibm,uic-440spe","ibm,uic";
+		interrupt-controller;
+		cell-index = <3>;
+		dcr-reg = <0x0f0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x10 0x4 0x11 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	SDR0: sdr {
+		compatible = "ibm,sdr-440spe";
+		dcr-reg = <0x00e 0x002>;
+	};
+
+	CPR0: cpr {
+		compatible = "ibm,cpr-440spe";
+		dcr-reg = <0x00c 0x002>;
+	};
+
+	MQ0: mq {
+		compatible = "ibm,mq-440spe";
+		dcr-reg = <0x040 0x020>;
+	};
+
+	plb {
+		compatible = "ibm,plb-440spe", "ibm,plb-440gp", "ibm,plb4";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		/*        addr-child     addr-parent    size */
+		ranges = <0x4 0x00100000 0x4 0x00100000 0x00001000
+			  0x4 0x00200000 0x4 0x00200000 0x00000400
+			  0x4 0xe0000000 0x4 0xe0000000 0x20000000
+			  0xc 0x00000000 0xc 0x00000000 0x20000000
+			  0xd 0x00000000 0xd 0x00000000 0x80000000
+			  0xd 0x80000000 0xd 0x80000000 0x80000000
+			  0xe 0x00000000 0xe 0x00000000 0x80000000
+			  0xe 0x80000000 0xe 0x80000000 0x80000000
+			  0xf 0x00000000 0xf 0x00000000 0x80000000
+			  0xf 0x80000000 0xf 0x80000000 0x80000000>;
+		clock-frequency = <0>; /* Filled in by U-Boot */
+
+		SDRAM0: sdram {
+			compatible = "ibm,sdram-440spe", "ibm,sdram-405gp";
+			dcr-reg = <0x010 0x002>;
+		};
+
+		MAL0: mcmal {
+			compatible = "ibm,mcmal-440spe", "ibm,mcmal2";
+			dcr-reg = <0x180 0x062>;
+			num-tx-chans = <2>;
+			num-rx-chans = <1>;
+			interrupt-parent = <&MAL0>;
+			interrupts = <0x0 0x1 0x2 0x3 0x4>;
+			#interrupt-cells = <1>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-map = </*TXEOB*/ 0x0 &UIC1 0x6 0x4
+					 /*RXEOB*/ 0x1 &UIC1 0x7 0x4
+					 /*SERR*/  0x2 &UIC1 0x1 0x4
+					 /*TXDE*/  0x3 &UIC1 0x2 0x4
+					 /*RXDE*/  0x4 &UIC1 0x3 0x4>;
+		};
+
+		POB0: opb {
+			compatible = "ibm,opb-440spe", "ibm,opb-440gp", "ibm,opb";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0xe0000000 0x00000004 0xe0000000 0x20000000>;
+			clock-frequency = <0>; /* Filled in by U-Boot */
+
+			EBC0: ebc {
+				compatible = "ibm,ebc-440spe", "ibm,ebc-440gp", "ibm,ebc";
+				dcr-reg = <0x012 0x002>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				/* ranges property is supplied by U-Boot */
+				interrupts = <0x5 0x1>;
+				interrupt-parent = <&UIC1>;
+
+				nor_flash@0,0 {
+					compatible = "cfi-flash";
+					bank-width = <2>;
+					reg = <0x00000000 0x00000000 0x01000000>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					partition@0 {
+						label = "kernel";
+						reg = <0x00000000 0x001e0000>;
+					};
+					partition@1e0000 {
+						label = "dtb";
+						reg = <0x001e0000 0x00020000>;
+					};
+					partition@200000 {
+						label = "root";
+						reg = <0x00200000 0x00200000>;
+					};
+					partition@400000 {
+						label = "user";
+						reg = <0x00400000 0x00b60000>;
+					};
+					partition@f60000 {
+						label = "env";
+						reg = <0x00f60000 0x00040000>;
+					};
+					partition@fa0000 {
+						label = "u-boot";
+						reg = <0x00fa0000 0x00060000>;
+					};
+				};
+
+				SysACE_CompactFlash: sysace@1,0 {
+					compatible = "xlnx,sysace";
+					interrupt-parent = <&UIC2>;
+					interrupts = <24 0x4>;
+					reg = <0x00000001 0x00000000 0x10000>;
+				};
+			};
+
+			UART0: serial@f0000200 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0xf0000200 0x00000008>;
+				virtual-reg = <0xa0000200>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				current-speed = <115200>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x0 0x4>;
+			};
+
+			UART1: serial@f0000300 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0xf0000300 0x00000008>;
+				virtual-reg = <0xa0000300>;
+				clock-frequency = <0>;
+				current-speed = <0>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x1 0x4>;
+			};
+
+
+			UART2: serial@f0000600 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0xf0000600 0x00000008>;
+				virtual-reg = <0xa0000600>;
+				clock-frequency = <0>;
+				current-speed = <0>;
+				interrupt-parent = <&UIC1>;
+				interrupts = <0x5 0x4>;
+			};
+
+			IIC0: i2c@f0000400 {
+				compatible = "ibm,iic-440spe", "ibm,iic-440gp", "ibm,iic";
+				reg = <0xf0000400 0x00000014>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x2 0x4>;
+			};
+
+			IIC1: i2c@f0000500 {
+				compatible = "ibm,iic-440spe", "ibm,iic-440gp", "ibm,iic";
+				reg = <0xf0000500 0x00000014>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x3 0x4>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+                                rtc@68 {
+                                        compatible = "stm,m41t00";
+                                        reg = <0x68>;
+                                };
+			};
+
+			EMAC0: ethernet@f0000800 {
+				linux,network-index = <0x0>;
+				device_type = "network";
+				compatible = "ibm,emac-440spe", "ibm,emac4";
+				interrupt-parent = <&UIC1>;
+				interrupts = <0x1c 0x4 0x1d 0x4>;
+				reg = <0xf0000800 0x00000074>;
+				local-mac-address = [000000000000];
+				mal-device = <&MAL0>;
+				mal-tx-channel = <0>;
+				mal-rx-channel = <0>;
+				cell-index = <0>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				phy-mode = "gmii";
+				phy-map = <0x00000000>;
+				has-inverted-stacr-oc;
+				has-new-stacr-staopc;
+			};
+		};
+
+		PCIX0: pci@c0ec00000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pcix-440spe", "ibm,plb-pcix";
+			primary;
+			large-inbound-windows;
+			enable-msi-hole;
+			reg = <0x0000000c 0x0ec00000 0x00000008   /* Config space access */
+			       0x00000000 0x00000000 0x00000000   /* no IACK cycles */
+			       0x0000000c 0x0ed00000 0x00000004   /* Special cycles */
+			       0x0000000c 0x0ec80000 0x00000100   /* Internal registers */
+			       0x0000000c 0x0ec80100 0x000000fc>; /* Internal messaging registers */
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed
+			 */
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000d 0x80000000 0x00000000 0x80000000
+				  0x01000000 0x00000000 0x00000000 0x0000000c 0x08000000 0x00000000 0x00010000>;
+
+			/* Inbound 4GB range starting at 0 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x1 0x00000000>;
+
+			/* This drives busses 0 to 0xf */
+			bus-range = <0x0 0xf>;
+
+			/* PCI-X interrupt (SM502) is routed to extIRQ10 (UIC1, 19) */
+			interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+			interrupt-map = <0x0 0x0 0x0 0x0 &UIC1 19 0x8>;
+		};
+
+		PCIE0: pciex@d00000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pciex-440spe", "ibm,plb-pciex";
+			primary;
+			port = <0x0>; /* port number */
+			reg = <0x0000000d 0x00000000 0x20000000	/* Config space access */
+			       0x0000000c 0x10000000 0x00001000>;	/* Registers */
+			dcr-reg = <0x100 0x020>;
+			sdr-base = <0x300>;
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed
+			 */
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000
+				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>;
+
+			/* Inbound 4GB range starting at 0 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x1 0x00000000>;
+
+			/* This drives busses 0x10 to 0x1f */
+			bus-range = <0x10 0x1f>;
+
+			/* Legacy interrupts (note the weird polarity, the bridge seems
+			 * to invert PCIe legacy interrupts).
+			 * We are de-swizzling here because the numbers are actually for
+			 * port of the root complex virtual P2P bridge. But I want
+			 * to avoid putting a node for it in the tree, so the numbers
+			 * below are basically de-swizzled numbers.
+			 * The real slot is on idsel 0, so the swizzling is 1:1
+			 */
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <
+				0x0 0x0 0x0 0x1 &UIC3 0x0 0x4 /* swizzled int A */
+				0x0 0x0 0x0 0x2 &UIC3 0x1 0x4 /* swizzled int B */
+				0x0 0x0 0x0 0x3 &UIC3 0x2 0x4 /* swizzled int C */
+				0x0 0x0 0x0 0x4 &UIC3 0x3 0x4 /* swizzled int D */>;
+		};
+
+		PCIE1: pciex@d20000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pciex-440spe", "ibm,plb-pciex";
+			primary;
+			port = <0x1>; /* port number */
+			reg = <0x0000000d 0x20000000 0x20000000	/* Config space access */
+			       0x0000000c 0x10001000 0x00001000>;	/* Registers */
+			dcr-reg = <0x120 0x020>;
+			sdr-base = <0x340>;
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed
+			 */
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x80000000 0x00000000 0x80000000
+				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80010000 0x00000000 0x00010000>;
+
+			/* Inbound 4GB range starting at 0 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x1 0x00000000>;
+
+			/* This drives busses 0x20 to 0x2f */
+			bus-range = <0x20 0x2f>;
+
+			/* Legacy interrupts (note the weird polarity, the bridge seems
+			 * to invert PCIe legacy interrupts).
+			 * We are de-swizzling here because the numbers are actually for
+			 * port of the root complex virtual P2P bridge. But I want
+			 * to avoid putting a node for it in the tree, so the numbers
+			 * below are basically de-swizzled numbers.
+			 * The real slot is on idsel 0, so the swizzling is 1:1
+			 */
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <
+				0x0 0x0 0x0 0x1 &UIC3 0x4 0x4 /* swizzled int A */
+				0x0 0x0 0x0 0x2 &UIC3 0x5 0x4 /* swizzled int B */
+				0x0 0x0 0x0 0x3 &UIC3 0x6 0x4 /* swizzled int C */
+				0x0 0x0 0x0 0x4 &UIC3 0x7 0x4 /* swizzled int D */>;
+		};
+
+		I2O: i2o@400100000 {
+			compatible = "ibm,i2o-440spe";
+			reg = <0x00000004 0x00100000 0x100>;
+			dcr-reg = <0x060 0x020>;
+		};
+
+		DMA0: dma0@400100100 {
+			compatible = "ibm,dma-440spe";
+			cell-index = <0>;
+			reg = <0x00000004 0x00100100 0x100>;
+			dcr-reg = <0x060 0x020>;
+			interrupt-parent = <&DMA0>;
+			interrupts = <0 1>;
+			#interrupt-cells = <1>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-map = <
+				0 &UIC0 0x14 4
+				1 &UIC1 0x16 4>;
+		};
+
+		DMA1: dma1@400100200 {
+			compatible = "ibm,dma-440spe";
+			cell-index = <1>;
+			reg = <0x00000004 0x00100200 0x100>;
+			dcr-reg = <0x060 0x020>;
+			interrupt-parent = <&DMA1>;
+			interrupts = <0 1>;
+			#interrupt-cells = <1>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-map = <
+				0 &UIC0 0x16 4
+				1 &UIC1 0x16 4>;
+		};
+
+		xor-accel@400200000 {
+			compatible = "amcc,xor-accelerator";
+			reg = <0x00000004 0x00200000 0x400>;
+			interrupt-parent = <&UIC1>;
+			interrupts = <0x1f 4>;
+		};
+	};
+
+	chosen {
+		linux,stdout-path = "/plb/opb/serial@f0000200";
+	};
+};
diff --git a/arch/powerpc/boot/dts/katmai.dts b/arch/powerpc/boot/dts/katmai.dts
index 8cf2c0c88c0..7c3be5e4574 100644
--- a/arch/powerpc/boot/dts/katmai.dts
+++ b/arch/powerpc/boot/dts/katmai.dts
@@ -44,6 +44,7 @@
 			d-cache-size = <32768>;
 			dcr-controller;
 			dcr-access-method = "native";
+			reset-type = <2>;	/* Use chip-reset */
 		};
 	};
 
diff --git a/arch/powerpc/boot/dts/lite5200.dts b/arch/powerpc/boot/dts/lite5200.dts
index 82ff2b13bc3..179a1785d64 100644
--- a/arch/powerpc/boot/dts/lite5200.dts
+++ b/arch/powerpc/boot/dts/lite5200.dts
@@ -134,12 +134,16 @@
 			compatible = "fsl,mpc5200-gpio";
 			reg = <0xb00 0x40>;
 			interrupts = <1 7 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
 		};
 
 		gpio@c00 {
 			compatible = "fsl,mpc5200-gpio-wkup";
 			reg = <0xc00 0x40>;
 			interrupts = <1 8 0 0 3 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
 		};
 
 		spi@f00 {
@@ -230,8 +234,8 @@
 			reg = <0x3000 0x400>;	// fec range, since we need to setup fec interrupts
 			interrupts = <2 5 0>;	// these are for "mii command finished", not link changes & co.
 
-			phy0: ethernet-phy@1 {
-				reg = <1>;
+			phy0: ethernet-phy@0 {
+				reg = <0>;
 			};
 		};
 
@@ -255,7 +259,13 @@
 			compatible = "fsl,mpc5200-i2c","fsl-i2c";
 			reg = <0x3d40 0x40>;
 			interrupts = <2 16 0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c02";
+				reg = <0x50>;
+			};
 		};
+
 		sram@8000 {
 			compatible = "fsl,mpc5200-sram";
 			reg = <0x8000 0x4000>;
@@ -281,4 +291,18 @@
 			  0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
 			  0x01000000 0 0x00000000 0xb0000000 0 0x01000000>;
 	};
+
+	localbus {
+		compatible = "fsl,mpc5200-lpb","simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+
+		ranges = <0 0 0xff000000 0x01000000>;
+
+		flash@0,0 {
+			compatible = "amd,am29lv652d", "cfi-flash";
+			reg = <0 0 0x01000000>;
+			bank-width = <1>;
+		};
+	};
 };
diff --git a/arch/powerpc/boot/dts/lite5200b.dts b/arch/powerpc/boot/dts/lite5200b.dts
index e45a63be3a8..59702ace900 100644
--- a/arch/powerpc/boot/dts/lite5200b.dts
+++ b/arch/powerpc/boot/dts/lite5200b.dts
@@ -259,6 +259,11 @@
 			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
 			reg = <0x3d40 0x40>;
 			interrupts = <2 16 0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c02";
+				reg = <0x50>;
+			};
 		};
 
 		sram@8000 {
diff --git a/arch/powerpc/boot/dts/mpc8308rdb.dts b/arch/powerpc/boot/dts/mpc8308rdb.dts
new file mode 100644
index 00000000000..a97eb2db5a1
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc8308rdb.dts
@@ -0,0 +1,303 @@
+/*
+ * MPC8308RDB Device Tree Source
+ *
+ * Copyright 2009 Freescale Semiconductor Inc.
+ * Copyright 2010 Ilya Yanok, Emcraft Systems, yanok@emcraft.com
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+	compatible = "fsl,mpc8308rdb";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8308@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <16384>;
+			i-cache-size = <16384>;
+			timebase-frequency = <0>;	// from bootloader
+			bus-frequency = <0>;		// from bootloader
+			clock-frequency = <0>;		// from bootloader
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;	// 128MB at 0
+	};
+
+	localbus@e0005000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8315-elbc", "fsl,elbc", "simple-bus";
+		reg = <0xe0005000 0x1000>;
+		interrupts = <77 0x8>;
+		interrupt-parent = <&ipic>;
+
+		// CS0 and CS1 are swapped when
+		// booting from nand, but the
+		// addresses are the same.
+		ranges = <0x0 0x0 0xfe000000 0x00800000
+		          0x1 0x0 0xe0600000 0x00002000
+		          0x2 0x0 0xf0000000 0x00020000
+		          0x3 0x0 0xfa000000 0x00008000>;
+
+		flash@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x0 0x0 0x800000>;
+			bank-width = <2>;
+			device-width = <1>;
+
+			u-boot@0 {
+				reg = <0x0 0x60000>;
+				read-only;
+			};
+			env@60000 {
+				reg = <0x60000 0x10000>;
+			};
+			env1@70000 {
+				reg = <0x70000 0x10000>;
+			};
+			kernel@80000 {
+				reg = <0x80000 0x200000>;
+			};
+			dtb@280000 {
+				reg = <0x280000 0x10000>;
+			};
+			ramdisk@290000 {
+				reg = <0x290000 0x570000>;
+			};
+		};
+
+		nand@1,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8315-fcm-nand",
+			             "fsl,elbc-fcm-nand";
+			reg = <0x1 0x0 0x2000>;
+
+			jffs2@0 {
+				reg = <0x0 0x2000000>;
+			};
+		};
+	};
+
+	immr@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "fsl,mpc8315-immr", "simple-bus";
+		ranges = <0 0xe0000000 0x00100000>;
+		reg = <0xe0000000 0x00000200>;
+		bus-frequency = <0>;
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <14 0x8>;
+			interrupt-parent = <&ipic>;
+			dfsrr;
+			rtc@68 {
+				compatible = "dallas,ds1339";
+				reg = <0x68>;
+			};
+		};
+
+		usb@23000 {
+			compatible = "fsl-usb2-dr";
+			reg = <0x23000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupt-parent = <&ipic>;
+			interrupts = <38 0x8>;
+			dr_mode = "peripheral";
+			phy_type = "ulpi";
+		};
+
+		enet0: ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x24000 0x1000>;
+
+			cell-index = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <32 0x8 33 0x8 34 0x8>;
+			interrupt-parent = <&ipic>;
+			tbi-handle = < &tbi0 >;
+			phy-handle = < &phy2 >;
+			fsl,magic-packet;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-mdio";
+				reg = <0x520 0x20>;
+				phy2: ethernet-phy@2 {
+					interrupt-parent = <&ipic>;
+					interrupts = <17 0x8>;
+					reg = <0x2>;
+					device_type = "ethernet-phy";
+				};
+				tbi0: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		enet1: ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <1>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x25000 0x1000>;
+			ranges = <0x0 0x25000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <35 0x8 36 0x8 37 0x8>;
+			interrupt-parent = <&ipic>;
+			tbi-handle = < &tbi1 >;
+			/* Vitesse 7385 isn't on the MDIO bus */
+			fixed-link = <1 1 1000 0 0>;
+			fsl,magic-packet;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi1: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <133333333>;
+			interrupts = <9 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4600 0x100>;
+			clock-frequency = <133333333>;
+			interrupts = <10 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		gpio@c00 {
+			#gpio-cells = <2>;
+			device_type = "gpio";
+			compatible = "fsl,mpc8308-gpio", "fsl,mpc8349-gpio";
+			reg = <0xc00 0x18>;
+			interrupts = <74 0x8>;
+			interrupt-parent = <&ipic>;
+			gpio-controller;
+		};
+
+		/* IPIC
+		 * interrupts cell = <intr #, sense>
+		 * sense values match linux IORESOURCE_IRQ_* defines:
+		 * sense == 8: Level, low assertion
+		 * sense == 2: Edge, high-to-low change
+		 */
+		ipic: interrupt-controller@700 {
+			compatible = "fsl,ipic";
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x700 0x100>;
+			device_type = "ipic";
+		};
+
+		ipic-msi@7c0 {
+			compatible = "fsl,ipic-msi";
+			reg = <0x7c0 0x40>;
+			msi-available-ranges = <0x0 0x100>;
+			interrupts = < 0x43 0x8
+					0x4  0x8
+					0x51 0x8
+					0x52 0x8
+					0x56 0x8
+					0x57 0x8
+					0x58 0x8
+					0x59 0x8 >;
+			interrupt-parent = < &ipic >;
+		};
+
+	};
+
+	pci0: pcie@e0009000 {
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		device_type = "pci";
+		compatible = "fsl,mpc8308-pcie", "fsl,mpc8314-pcie";
+		reg = <0xe0009000 0x00001000
+			0xb0000000 0x01000000>;
+		ranges = <0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
+		          0x01000000 0 0x00000000 0xb1000000 0 0x00800000>;
+		bus-range = <0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <0 0 0 1 &ipic 1 8
+				 0 0 0 2 &ipic 1 8
+				 0 0 0 3 &ipic 1 8
+				 0 0 0 4 &ipic 1 8>;
+		interrupts = <0x1 0x8>;
+		interrupt-parent = <&ipic>;
+		clock-frequency = <0>;
+
+		pcie@0 {
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			reg = <0 0 0 0 0>;
+			ranges = <0x02000000 0 0xa0000000
+				  0x02000000 0 0xa0000000
+				  0 0x10000000
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00800000>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/mpc8540ads.dts b/arch/powerpc/boot/dts/mpc8540ads.dts
index 9dc292962a9..8d1bf0fd926 100644
--- a/arch/powerpc/boot/dts/mpc8540ads.dts
+++ b/arch/powerpc/boot/dts/mpc8540ads.dts
@@ -71,14 +71,14 @@
 		};
 
 		memory-controller@2000 {
-			compatible = "fsl,8540-memory-controller";
+			compatible = "fsl,mpc8540-memory-controller";
 			reg = <0x2000 0x1000>;
 			interrupt-parent = <&mpic>;
 			interrupts = <18 2>;
 		};
 
 		L2: l2-cache-controller@20000 {
-			compatible = "fsl,8540-l2-cache-controller";
+			compatible = "fsl,mpc8540-l2-cache-controller";
 			reg = <0x20000 0x1000>;
 			cache-line-size = <32>;	// 32 bytes
 			cache-size = <0x40000>;	// L2, 256K
diff --git a/arch/powerpc/boot/dts/mpc8541cds.dts b/arch/powerpc/boot/dts/mpc8541cds.dts
index 9a3ad311aed..87ff96549fa 100644
--- a/arch/powerpc/boot/dts/mpc8541cds.dts
+++ b/arch/powerpc/boot/dts/mpc8541cds.dts
@@ -71,14 +71,14 @@
 		};
 
 		memory-controller@2000 {
-			compatible = "fsl,8541-memory-controller";
+			compatible = "fsl,mpc8541-memory-controller";
 			reg = <0x2000 0x1000>;
 			interrupt-parent = <&mpic>;
 			interrupts = <18 2>;
 		};
 
 		L2: l2-cache-controller@20000 {
-			compatible = "fsl,8541-l2-cache-controller";
+			compatible = "fsl,mpc8541-l2-cache-controller";
 			reg = <0x20000 0x1000>;
 			cache-line-size = <32>;	// 32 bytes
 			cache-size = <0x40000>;	// L2, 256K
diff --git a/arch/powerpc/boot/dts/mpc8544ds.dts b/arch/powerpc/boot/dts/mpc8544ds.dts
index 98e94b46566..d793968743c 100644
--- a/arch/powerpc/boot/dts/mpc8544ds.dts
+++ b/arch/powerpc/boot/dts/mpc8544ds.dts
@@ -73,14 +73,14 @@
 		};
 
 		memory-controller@2000 {
-			compatible = "fsl,8544-memory-controller";
+			compatible = "fsl,mpc8544-memory-controller";
 			reg = <0x2000 0x1000>;
 			interrupt-parent = <&mpic>;
 			interrupts = <18 2>;
 		};
 
 		L2: l2-cache-controller@20000 {
-			compatible = "fsl,8544-l2-cache-controller";
+			compatible = "fsl,mpc8544-l2-cache-controller";
 			reg = <0x20000 0x1000>;
 			cache-line-size = <32>;	// 32 bytes
 			cache-size = <0x40000>;	// L2, 256K
diff --git a/arch/powerpc/boot/dts/mpc8548cds.dts b/arch/powerpc/boot/dts/mpc8548cds.dts
index 4173af387c6..a17a5572fb7 100644
--- a/arch/powerpc/boot/dts/mpc8548cds.dts
+++ b/arch/powerpc/boot/dts/mpc8548cds.dts
@@ -20,10 +20,8 @@
 	aliases {
 		ethernet0 = &enet0;
 		ethernet1 = &enet1;
-/*
 		ethernet2 = &enet2;
 		ethernet3 = &enet3;
-*/
 		serial0 = &serial0;
 		serial1 = &serial1;
 		pci0 = &pci0;
@@ -76,14 +74,14 @@
 		};
 
 		memory-controller@2000 {
-			compatible = "fsl,8548-memory-controller";
+			compatible = "fsl,mpc8548-memory-controller";
 			reg = <0x2000 0x1000>;
 			interrupt-parent = <&mpic>;
 			interrupts = <18 2>;
 		};
 
 		L2: l2-cache-controller@20000 {
-			compatible = "fsl,8548-l2-cache-controller";
+			compatible = "fsl,mpc8548-l2-cache-controller";
 			reg = <0x20000 0x1000>;
 			cache-line-size = <32>;	// 32 bytes
 			cache-size = <0x80000>;	// L2, 512K
@@ -254,7 +252,6 @@
 			};
 		};
 
-/* eTSEC 3/4 are currently broken
 		enet2: ethernet@26000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -310,7 +307,6 @@
 				};
 			};
 		};
- */
 
 		serial0: serial@4500 {
 			cell-index = <0>;
diff --git a/arch/powerpc/boot/dts/mpc8555cds.dts b/arch/powerpc/boot/dts/mpc8555cds.dts
index 065b2f093de..5c5614f9eb1 100644
--- a/arch/powerpc/boot/dts/mpc8555cds.dts
+++ b/arch/powerpc/boot/dts/mpc8555cds.dts
@@ -71,14 +71,14 @@
 		};
 
 		memory-controller@2000 {
-			compatible = "fsl,8555-memory-controller";
+			compatible = "fsl,mpc8555-memory-controller";
 			reg = <0x2000 0x1000>;
 			interrupt-parent = <&mpic>;
 			interrupts = <18 2>;
 		};
 
 		L2: l2-cache-controller@20000 {
-			compatible = "fsl,8555-l2-cache-controller";
+			compatible = "fsl,mpc8555-l2-cache-controller";
 			reg = <0x20000 0x1000>;
 			cache-line-size = <32>;	// 32 bytes
 			cache-size = <0x40000>;	// L2, 256K
diff --git a/arch/powerpc/boot/dts/mpc8560ads.dts b/arch/powerpc/boot/dts/mpc8560ads.dts
index a5bb1ec70a5..6e85e1ba085 100644
--- a/arch/powerpc/boot/dts/mpc8560ads.dts
+++ b/arch/powerpc/boot/dts/mpc8560ads.dts
@@ -71,14 +71,14 @@
 		};
 
 		memory-controller@2000 {
-			compatible = "fsl,8540-memory-controller";
+			compatible = "fsl,mpc8540-memory-controller";
 			reg = <0x2000 0x1000>;
 			interrupt-parent = <&mpic>;
 			interrupts = <18 2>;
 		};
 
 		L2: l2-cache-controller@20000 {
-			compatible = "fsl,8540-l2-cache-controller";
+			compatible = "fsl,mpc8540-l2-cache-controller";
 			reg = <0x20000 0x1000>;
 			cache-line-size = <32>;	// 32 bytes
 			cache-size = <0x40000>;	// L2, 256K
diff --git a/arch/powerpc/boot/dts/mpc8568mds.dts b/arch/powerpc/boot/dts/mpc8568mds.dts
index 92fb17876e7..30cf0e098bb 100644
--- a/arch/powerpc/boot/dts/mpc8568mds.dts
+++ b/arch/powerpc/boot/dts/mpc8568mds.dts
@@ -124,14 +124,14 @@
 		};
 
 		memory-controller@2000 {
-			compatible = "fsl,8568-memory-controller";
+			compatible = "fsl,mpc8568-memory-controller";
 			reg = <0x2000 0x1000>;
 			interrupt-parent = <&mpic>;
 			interrupts = <18 2>;
 		};
 
 		L2: l2-cache-controller@20000 {
-			compatible = "fsl,8568-l2-cache-controller";
+			compatible = "fsl,mpc8568-l2-cache-controller";
 			reg = <0x20000 0x1000>;
 			cache-line-size = <32>;	// 32 bytes
 			cache-size = <0x80000>;	// L2, 512K
diff --git a/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts b/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts
index 5bd1011fde9..3375c2ab0c3 100644
--- a/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts
+++ b/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts
@@ -215,6 +215,18 @@
 			clock-frequency = <0>;
 		};
 
+		msi@41600 {
+			compatible = "fsl,mpc8572-msi", "fsl,mpic-msi";
+			reg = <0x41600 0x80>;
+			msi-available-ranges = <0 0x80>;
+			interrupts = <
+				0xe0 0
+				0xe1 0
+				0xe2 0
+				0xe3 0>;
+			interrupt-parent = <&mpic>;
+		};
+
 		global-utilities@e0000 {	//global utilities block
 			compatible = "fsl,mpc8572-guts";
 			reg = <0xe0000 0x1000>;
@@ -243,8 +255,7 @@
 			protected-sources = <
 			31 32 33 37 38 39       /* enet2 enet3 */
 			76 77 78 79 26 42	/* dma2 pci2 serial*/
-			0xe0 0xe1 0xe2 0xe3     /* msi */
-			0xe4 0xe5 0xe6 0xe7
+			0xe4 0xe5 0xe6 0xe7	/* msi */
 			>;
 		};
 	};
diff --git a/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts b/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts
index 0efc3456e29..e7b477f6a3f 100644
--- a/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts
+++ b/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts
@@ -154,12 +154,8 @@
 		msi@41600 {
 			compatible = "fsl,mpc8572-msi", "fsl,mpic-msi";
 			reg = <0x41600 0x80>;
-			msi-available-ranges = <0 0x100>;
+			msi-available-ranges = <0x80 0x80>;
 			interrupts = <
-				0xe0 0
-				0xe1 0
-				0xe2 0
-				0xe3 0
 				0xe4 0
 				0xe5 0
 				0xe6 0
@@ -190,6 +186,7 @@
 			0x1 0x2 0x3 0x4         /* pci slot */
 			0x9 0xa 0xb 0xc         /* usb */
 			0x6 0x7 0xe 0x5         /* Audio elgacy SATA */
+			0xe0 0xe1 0xe2 0xe3	/* msi */
 			>;
 		};
 	};
diff --git a/arch/powerpc/boot/dts/p1021mds.dts b/arch/powerpc/boot/dts/p1021mds.dts
new file mode 100644
index 00000000000..ad5b8526900
--- /dev/null
+++ b/arch/powerpc/boot/dts/p1021mds.dts
@@ -0,0 +1,699 @@
+/*
+ * P1021 MDS Device Tree Source
+ *
+ * Copyright 2010 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+/ {
+	model = "fsl,P1021";
+	compatible = "fsl,P1021MDS";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
+		ethernet4 = &enet4;
+		pci0 = &pci0;
+		pci1 = &pci1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,P1021@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			next-level-cache = <&L2>;
+		};
+
+		PowerPC,P1021@1 {
+			device_type = "cpu";
+			reg = <0x1>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+	};
+
+	localbus@ffe05000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,p1021-elbc", "fsl,elbc", "simple-bus";
+		reg = <0 0xffe05000 0 0x1000>;
+		interrupts = <19 2>;
+		interrupt-parent = <&mpic>;
+
+		/* NAND Flash, BCSR, PMC0/1*/
+		ranges = <0x0 0x0 0x0 0xfc000000 0x02000000
+			  0x1 0x0 0x0 0xf8000000 0x00008000
+			  0x2 0x0 0x0 0xf8010000 0x00020000
+			  0x3 0x0 0x0 0xf8020000 0x00020000>;
+
+		nand@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,p1021-fcm-nand",
+				     "fsl,elbc-fcm-nand";
+			reg = <0x0 0x0 0x40000>;
+
+			partition@0 {
+				/* This location must not be altered  */
+				/* 1MB for u-boot Bootloader Image */
+				reg = <0x0 0x00100000>;
+				label = "NAND (RO) U-Boot Image";
+				read-only;
+			};
+
+			partition@100000 {
+				/* 1MB for DTB Image */
+				reg = <0x00100000 0x00100000>;
+				label = "NAND (RO) DTB Image";
+				read-only;
+			};
+
+			partition@200000 {
+				/* 4MB for Linux Kernel Image */
+				reg = <0x00200000 0x00400000>;
+				label = "NAND (RO) Linux Kernel Image";
+				read-only;
+			};
+
+			partition@600000 {
+				/* 5MB for Compressed Root file System Image */
+				reg = <0x00600000 0x00500000>;
+				label = "NAND (RO) Compressed RFS Image";
+				read-only;
+			};
+
+			partition@b00000 {
+				/* 6MB for JFFS2 based Root file System */
+				reg = <0x00a00000 0x00600000>;
+				label = "NAND (RW) JFFS2 Root File System";
+			};
+
+			partition@1100000 {
+				/* 14MB for JFFS2 based Root file System */
+				reg = <0x01100000 0x00e00000>;
+				label = "NAND (RW) Writable User area";
+			};
+
+			partition@1f00000 {
+				/* 1MB for microcode */
+				reg = <0x01f00000 0x00100000>;
+				label = "NAND (RO) QE Ucode";
+				read-only;
+			};
+		};
+
+		bcsr@1,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,p1021mds-bcsr";
+			reg = <1 0 0x8000>;
+			ranges = <0 1 0 0x8000>;
+		};
+
+		pib@2,0 {
+			compatible = "fsl,p1021mds-pib";
+			reg = <2 0 0x10000>;
+		};
+
+		pib@3,0 {
+			compatible = "fsl,p1021mds-pib";
+			reg = <3 0 0x10000>;
+		};
+	};
+
+	soc@ffe00000 {
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "fsl,p1021-immr", "simple-bus";
+		ranges = <0x0  0x0 0xffe00000 0x100000>;
+		bus-frequency = <0>;		// Filled out by uboot.
+
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <12>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,p1021-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <16 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		memory-controller@2000 {
+			compatible = "fsl,p1021-memory-controller";
+			reg = <0x2000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <16 2>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+			rtc@68 {
+				compatible = "dallas,ds1374";
+				reg = <0x68>;
+			};
+		};
+
+		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <0>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4600 0x100>;
+			clock-frequency = <0>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		spi@7000 {
+			cell-index = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,espi";
+			reg = <0x7000 0x1000>;
+			interrupts = <59 0x2>;
+			interrupt-parent = <&mpic>;
+			espi,num-ss-bits = <4>;
+			mode = "cpu";
+
+			fsl_m25p80@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "fsl,espi-flash";
+				reg = <0>;
+				linux,modalias = "fsl_m25p80";
+				spi-max-frequency = <40000000>; /* input clock */
+				partition@u-boot {
+					label = "u-boot-spi";
+					reg = <0x00000000 0x00100000>;
+					read-only;
+				};
+				partition@kernel {
+					label = "kernel-spi";
+					reg = <0x00100000 0x00500000>;
+					read-only;
+				};
+				partition@dtb {
+					label = "dtb-spi";
+					reg = <0x00600000 0x00100000>;
+					read-only;
+				};
+				partition@fs {
+					label = "file system-spi";
+					reg = <0x00700000 0x00900000>;
+				};
+			};
+		};
+
+		gpio: gpio-controller@f000 {
+			#gpio-cells = <2>;
+			compatible = "fsl,mpc8572-gpio";
+			reg = <0xf000 0x100>;
+			interrupts = <47 0x2>;
+			interrupt-parent = <&mpic>;
+			gpio-controller;
+		};
+
+		L2: l2-cache-controller@20000 {
+			compatible = "fsl,p1021-l2-cache-controller";
+			reg = <0x20000 0x1000>;
+			cache-line-size = <32>;	// 32 bytes
+			cache-size = <0x40000>; // L2,256K
+			interrupt-parent = <&mpic>;
+			interrupts = <16 2>;
+		};
+
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
+		usb@22000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl-usb2-dr";
+			reg = <0x22000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <28 0x2>;
+			phy_type = "ulpi";
+		};
+
+		 mdio@24000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,etsec2-mdio";
+			reg = <0x24000 0x1000 0xb0030 0x4>;
+
+			phy0: ethernet-phy@0 {
+				interrupt-parent = <&mpic>;
+				interrupts = <1 1>;
+				reg = <0x0>;
+			};
+			phy1: ethernet-phy@1 {
+				interrupt-parent = <&mpic>;
+				interrupts = <2 1>;
+				reg = <0x1>;
+			};
+			phy4: ethernet-phy@4 {
+				interrupt-parent = <&mpic>;
+				reg = <0x4>;
+			};
+		};
+
+		mdio@25000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,etsec2-tbi";
+			reg = <0x25000 0x1000 0xb1030 0x4>;
+			tbi0: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		enet0: ethernet@B0000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "fsl,etsec2";
+			fsl,num_rx_queues = <0x8>;
+			fsl,num_tx_queues = <0x8>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy0>;
+			phy-connection-type = "rgmii-id";
+			queue-group@0{
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xB0000 0x1000>;
+				interrupts = <29 2 30 2 34 2>;
+			};
+			queue-group@1{
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xB4000 0x1000>;
+				interrupts = <17 2 18 2 24 2>;
+			};
+		};
+
+		enet1: ethernet@B1000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "fsl,etsec2";
+			fsl,num_rx_queues = <0x8>;
+			fsl,num_tx_queues = <0x8>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy4>;
+			tbi-handle = <&tbi0>;
+			phy-connection-type = "sgmii";
+			queue-group@0{
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xB1000 0x1000>;
+				interrupts = <35 2 36 2 40 2>;
+			};
+			queue-group@1{
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xB5000 0x1000>;
+				interrupts = <51 2 52 2 67 2>;
+			};
+		};
+
+		enet2: ethernet@B2000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "fsl,etsec2";
+			fsl,num_rx_queues = <0x8>;
+			fsl,num_tx_queues = <0x8>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy1>;
+			phy-connection-type = "rgmii-id";
+			queue-group@0{
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xB2000 0x1000>;
+				interrupts = <31 2 32 2 33 2>;
+			};
+			queue-group@1{
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xB6000 0x1000>;
+				interrupts = <25 2 26 2 27 2>;
+			};
+		};
+
+		sdhci@2e000 {
+			compatible = "fsl,p1021-esdhc", "fsl,esdhc";
+			reg = <0x2e000 0x1000>;
+			interrupts = <72 0x2>;
+			interrupt-parent = <&mpic>;
+			/* Filled in by U-Boot */
+			clock-frequency = <0>;
+		};
+
+		crypto@30000 {
+			compatible = "fsl,sec3.3", "fsl,sec3.1",
+				     "fsl,sec3.0", "fsl,sec2.4",
+				     "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <45 2 58 2>;
+			interrupt-parent = <&mpic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x97c>;
+			fsl,descriptor-types-mask = <0x3a30abf>;
+		};
+
+		mpic: pic@40000 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x40000 0x40000>;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+		};
+
+		msi@41600 {
+			compatible = "fsl,p1021-msi", "fsl,mpic-msi";
+			reg = <0x41600 0x80>;
+			msi-available-ranges = <0 0x100>;
+			interrupts = <
+				0xe0 0
+				0xe1 0
+				0xe2 0
+				0xe3 0
+				0xe4 0
+				0xe5 0
+				0xe6 0
+				0xe7 0>;
+			interrupt-parent = <&mpic>;
+		};
+
+		global-utilities@e0000 {	//global utilities block
+			compatible = "fsl,p1021-guts";
+			reg = <0xe0000 0x1000>;
+			fsl,has-rstcr;
+		};
+
+		par_io@e0100 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0xe0100 0x60>;
+			ranges = <0x0 0xe0100 0x60>;
+			device_type = "par_io";
+			num-ports = <3>;
+			pio1: ucc_pin@01 {
+				pio-map = <
+			/* port  pin  dir  open_drain  assignment  has_irq */
+					0x1  0x13 0x1  0x0  0x1  0x0    /* QE_MUX_MDC */
+					0x1  0x14 0x3  0x0  0x1  0x0    /* QE_MUX_MDIO */
+					0x0  0x17 0x2  0x0  0x2  0x0    /* CLK12 */
+					0x0  0x18 0x2  0x0  0x1  0x0    /* CLK9
+*/
+					0x0  0x7  0x1  0x0  0x2  0x0    /* ENET1_TXD0_SER1_TXD0 */
+					0x0  0x9  0x1  0x0  0x2  0x0    /* ENET1_TXD1_SER1_TXD1 */
+					0x0  0xb  0x1  0x0  0x2  0x0    /* ENET1_TXD2_SER1_TXD2 */
+					0x0  0xc  0x1  0x0  0x2  0x0    /* ENET1_TXD3_SER1_TXD3 */
+					0x0  0x6  0x2  0x0  0x2  0x0    /* ENET1_RXD0_SER1_RXD0 */
+					0x0  0xa  0x2  0x0  0x2  0x0    /* ENET1_RXD1_SER1_RXD1 */
+					0x0  0xe  0x2  0x0  0x2  0x0    /* ENET1_RXD2_SER1_RXD2 */
+					0x0  0xf  0x2  0x0  0x2  0x0    /* ENET1_RXD3_SER1_RXD3 */
+					0x0  0x5  0x1  0x0  0x2  0x0    /* ENET1_TX_EN_SER1_RTS_B */
+					0x0  0xd  0x1  0x0  0x2  0x0    /* ENET1_TX_ER */
+					0x0  0x4  0x2  0x0  0x2  0x0    /* ENET1_RX_DV_SER1_CTS_B */
+					0x0  0x8  0x2  0x0  0x2  0x0    /* ENET1_RX_ER_SER1_CD_B */
+					0x0  0x11 0x2  0x0  0x2  0x0    /* ENET1_CRS */
+					0x0  0x10 0x2  0x0  0x2  0x0>;    /* ENET1_COL */
+			};
+
+			pio2: ucc_pin@02 {
+				pio-map = <
+			/* port  pin  dir  open_drain  assignment  has_irq */
+					0x1  0x13 0x1  0x0  0x1  0x0    /* QE_MUX_MDC */
+					0x1  0x14 0x3  0x0  0x1  0x0    /* QE_MUX_MDIO */
+					0x1  0xb  0x2  0x0  0x1  0x0    /* CLK13 */
+					0x1  0x7  0x1  0x0  0x2  0x0    /* ENET5_TXD0_SER5_TXD0 */
+					0x1  0xa  0x1  0x0  0x2  0x0    /* ENET5_TXD1_SER5_TXD1 */
+					0x1  0x6  0x2  0x0  0x2  0x0    /* ENET5_RXD0_SER5_RXD0 */
+					0x1  0x9  0x2  0x0  0x2  0x0    /* ENET5_RXD1_SER5_RXD1 */
+					0x1  0x5  0x1  0x0  0x2  0x0    /* ENET5_TX_EN_SER5_RTS_B */
+					0x1  0x4  0x2  0x0  0x2  0x0    /* ENET5_RX_DV_SER5_CTS_B */
+					0x1  0x8  0x2  0x0  0x2  0x0>;    /* ENET5_RX_ER_SER5_CD_B */
+			};
+		};
+	};
+
+	pci0: pcie@ffe09000 {
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0 0xffe09000 0 0x1000>;
+		bus-range = <0 255>;
+		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
+		clock-frequency = <33333333>;
+		interrupt-parent = <&mpic>;
+		interrupts = <16 2>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 4 1
+			0000 0 0 2 &mpic 5 1
+			0000 0 0 3 &mpic 6 1
+			0000 0 0 4 &mpic 7 1
+			>;
+		pcie@0 {
+			reg = <0x0 0x0 0x0 0x0 0x0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x2000000 0x0 0xa0000000
+				  0x2000000 0x0 0xa0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	pci1: pcie@ffe0a000 {
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0 0xffe0a000 0 0x1000>;
+		bus-range = <0 255>;
+		ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
+		clock-frequency = <33333333>;
+		interrupt-parent = <&mpic>;
+		interrupts = <16 2>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 0 1
+			0000 0 0 2 &mpic 1 1
+			0000 0 0 3 &mpic 2 1
+			0000 0 0 4 &mpic 3 1
+			>;
+		pcie@0 {
+			reg = <0x0 0x0 0x0 0x0 0x0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x2000000 0x0 0xc0000000
+				  0x2000000 0x0 0xc0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	qe@ffe80000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "qe";
+		compatible = "fsl,qe";
+		ranges = <0x0 0x0 0xffe80000 0x40000>;
+		reg = <0 0xffe80000 0 0x480>;
+		brg-frequency = <0>;
+		bus-frequency = <0>;
+		fsl,qe-num-riscs = <1>;
+		fsl,qe-num-snums = <28>;
+		status = "disabled"; /* no firmware loaded */
+
+		qeic: interrupt-controller@80 {
+			interrupt-controller;
+			compatible = "fsl,qe-ic";
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+			reg = <0x80 0x80>;
+			interrupts = <63 2 60 2>; //high:47 low:44
+			interrupt-parent = <&mpic>;
+		};
+
+		enet3: ucc@2000 {
+			device_type = "network";
+			compatible = "ucc_geth";
+			cell-index = <1>;
+			reg = <0x2000 0x200>;
+			interrupts = <32>;
+			interrupt-parent = <&qeic>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			rx-clock-name = "clk12";
+			tx-clock-name = "clk9";
+			pio-handle = <&pio1>;
+			phy-handle = <&qe_phy0>;
+			phy-connection-type = "mii";
+		};
+
+		mdio@2120 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2120 0x18>;
+			compatible = "fsl,ucc-mdio";
+
+			qe_phy0: ethernet-phy@0 {
+				interrupt-parent = <&mpic>;
+				interrupts = <4 1>;
+				reg = <0x0>;
+				device_type = "ethernet-phy";
+			};
+			qe_phy1: ethernet-phy@03 {
+				interrupt-parent = <&mpic>;
+				interrupts = <5 1>;
+				reg = <0x3>;
+				device_type = "ethernet-phy";
+			};
+			tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		enet4: ucc@2400 {
+			device_type = "network";
+			compatible = "ucc_geth";
+			cell-index = <5>;
+			reg = <0x2400 0x200>;
+			interrupts = <40>;
+			interrupt-parent = <&qeic>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			rx-clock-name = "none";
+			tx-clock-name = "clk13";
+			pio-handle = <&pio2>;
+			phy-handle = <&qe_phy1>;
+			phy-connection-type = "rmii";
+		};
+
+		muram@10000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,qe-muram", "fsl,cpm-muram";
+			ranges = <0x0 0x10000 0x6000>;
+
+			data-only@0 {
+				compatible = "fsl,qe-muram-data",
+				"fsl,cpm-muram-data";
+				reg = <0x0 0x6000>;
+			};
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/p1022ds.dts b/arch/powerpc/boot/dts/p1022ds.dts
new file mode 100644
index 00000000000..8bcb10b9267
--- /dev/null
+++ b/arch/powerpc/boot/dts/p1022ds.dts
@@ -0,0 +1,633 @@
+/*
+ * P1022 DS 36Bit Physical Address Map Device Tree Source
+ *
+ * Copyright 2010 Freescale Semiconductor, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+/ {
+	model = "fsl,P1022";
+	compatible = "fsl,P1022DS";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+		pci1 = &pci1;
+		pci2 = &pci2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,P1022@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			next-level-cache = <&L2>;
+		};
+
+		PowerPC,P1022@1 {
+			device_type = "cpu";
+			reg = <0x1>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+	};
+
+	localbus@fffe05000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,p1022-elbc", "fsl,elbc", "simple-bus";
+		reg = <0 0xffe05000 0 0x1000>;
+		interrupts = <19 2>;
+
+		ranges = <0x0 0x0 0xf 0xe8000000 0x08000000
+			  0x1 0x0 0xf 0xe0000000 0x08000000
+			  0x2 0x0 0x0 0xffa00000 0x00040000
+			  0x3 0x0 0xf 0xffdf0000 0x00008000>;
+
+		nor@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x0 0x0 0x8000000>;
+			bank-width = <2>;
+			device-width = <1>;
+
+			partition@0 {
+				reg = <0x0 0x03000000>;
+				label = "ramdisk-nor";
+				read-only;
+			};
+
+			partition@3000000 {
+				reg = <0x03000000 0x00e00000>;
+				label = "diagnostic-nor";
+				read-only;
+			};
+
+			partition@3e00000 {
+				reg = <0x03e00000 0x00200000>;
+				label = "dink-nor";
+				read-only;
+			};
+
+			partition@4000000 {
+				reg = <0x04000000 0x00400000>;
+				label = "kernel-nor";
+				read-only;
+			};
+
+			partition@4400000 {
+				reg = <0x04400000 0x03b00000>;
+				label = "jffs2-nor";
+			};
+
+			partition@7f00000 {
+				reg = <0x07f00000 0x00080000>;
+				label = "dtb-nor";
+				read-only;
+			};
+
+			partition@7f80000 {
+				reg = <0x07f80000 0x00080000>;
+				label = "u-boot-nor";
+				read-only;
+			};
+		};
+
+		nand@2,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,elbc-fcm-nand";
+			reg = <0x2 0x0 0x40000>;
+
+			partition@0 {
+				reg = <0x0 0x02000000>;
+				label = "u-boot-nand";
+				read-only;
+			};
+
+			partition@2000000 {
+				reg = <0x02000000 0x10000000>;
+				label = "jffs2-nand";
+			};
+
+			partition@12000000 {
+				reg = <0x12000000 0x10000000>;
+				label = "ramdisk-nand";
+				read-only;
+			};
+
+			partition@22000000 {
+				reg = <0x22000000 0x04000000>;
+				label = "kernel-nand";
+			};
+
+			partition@26000000 {
+				reg = <0x26000000 0x01000000>;
+				label = "dtb-nand";
+				read-only;
+			};
+
+			partition@27000000 {
+				reg = <0x27000000 0x19000000>;
+				label = "reserved-nand";
+			};
+		};
+	};
+
+	soc@fffe00000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "fsl,p1022-immr", "simple-bus";
+		ranges = <0x0 0xf 0xffe00000 0x100000>;
+		bus-frequency = <0>;		// Filled out by uboot.
+
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <12>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,p1022-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <16 2>;
+		};
+
+		memory-controller@2000 {
+			compatible = "fsl,p1022-memory-controller";
+			reg = <0x2000 0x1000>;
+			interrupts = <16 2>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <43 2>;
+			dfsrr;
+		};
+
+		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <43 2>;
+			dfsrr;
+
+			wm8776:codec@1a {
+				compatible = "wlf,wm8776";
+				reg = <0x1a>;
+				/* MCLK source is a stand-alone oscillator */
+				clock-frequency = <12288000>;
+			};
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <0>;
+			interrupts = <42 2>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4600 0x100>;
+			clock-frequency = <0>;
+			interrupts = <42 2>;
+		};
+
+		spi@7000 {
+			cell-index = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,espi";
+			reg = <0x7000 0x1000>;
+			interrupts = <59 0x2>;
+			espi,num-ss-bits = <4>;
+			mode = "cpu";
+
+			fsl_m25p80@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "fsl,espi-flash";
+				reg = <0>;
+				linux,modalias = "fsl_m25p80";
+				spi-max-frequency = <40000000>; /* input clock */
+				partition@0 {
+					label = "u-boot-spi";
+					reg = <0x00000000 0x00100000>;
+					read-only;
+				};
+				partition@100000 {
+					label = "kernel-spi";
+					reg = <0x00100000 0x00500000>;
+					read-only;
+				};
+				partition@600000 {
+					label = "dtb-spi";
+					reg = <0x00600000 0x00100000>;
+					read-only;
+				};
+				partition@700000 {
+					label = "file system-spi";
+					reg = <0x00700000 0x00900000>;
+				};
+			};
+		};
+
+		ssi@15000 {
+			compatible = "fsl,mpc8610-ssi";
+			cell-index = <0>;
+			reg = <0x15000 0x100>;
+			interrupts = <75 2>;
+			fsl,mode = "i2s-slave";
+			codec-handle = <&wm8776>;
+			fsl,playback-dma = <&dma00>;
+			fsl,capture-dma = <&dma01>;
+			fsl,fifo-depth = <16>;
+		};
+
+		dma@c300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,eloplus-dma";
+			reg = <0xc300 0x4>;
+			ranges = <0x0 0xc100 0x200>;
+			cell-index = <1>;
+			dma00: dma-channel@0 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupts = <76 2>;
+			};
+			dma01: dma-channel@80 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupts = <77 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupts = <78 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupts = <79 2>;
+			};
+		};
+
+		gpio: gpio-controller@f000 {
+			#gpio-cells = <2>;
+			compatible = "fsl,mpc8572-gpio";
+			reg = <0xf000 0x100>;
+			interrupts = <47 0x2>;
+			gpio-controller;
+		};
+
+		L2: l2-cache-controller@20000 {
+			compatible = "fsl,p1022-l2-cache-controller";
+			reg = <0x20000 0x1000>;
+			cache-line-size = <32>;	// 32 bytes
+			cache-size = <0x40000>; // L2, 256K
+			interrupts = <16 2>;
+		};
+
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupts = <23 2>;
+			};
+		};
+
+		usb@22000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl-usb2-dr";
+			reg = <0x22000 0x1000>;
+			interrupts = <28 0x2>;
+			phy_type = "ulpi";
+		};
+
+		mdio@24000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,etsec2-mdio";
+			reg = <0x24000 0x1000 0xb0030 0x4>;
+
+			phy0: ethernet-phy@0 {
+				interrupts = <3 1>;
+				reg = <0x1>;
+			};
+			phy1: ethernet-phy@1 {
+				interrupts = <9 1>;
+				reg = <0x2>;
+			};
+		};
+
+		mdio@25000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,etsec2-mdio";
+			reg = <0x25000 0x1000 0xb1030 0x4>;
+		};
+
+		enet0: ethernet@B0000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "fsl,etsec2";
+			fsl,num_rx_queues = <0x8>;
+			fsl,num_tx_queues = <0x8>;
+			fsl,magic-packet;
+			fsl,wake-on-filer;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			fixed-link = <1 1 1000 0 0>;
+			phy-handle = <&phy0>;
+			phy-connection-type = "rgmii-id";
+			queue-group@0{
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xB0000 0x1000>;
+				interrupts = <29 2 30 2 34 2>;
+			};
+			queue-group@1{
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xB4000 0x1000>;
+				interrupts = <17 2 18 2 24 2>;
+			};
+		};
+
+		enet1: ethernet@B1000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "fsl,etsec2";
+			fsl,num_rx_queues = <0x8>;
+			fsl,num_tx_queues = <0x8>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			fixed-link = <1 1 1000 0 0>;
+			phy-handle = <&phy1>;
+			phy-connection-type = "rgmii-id";
+			queue-group@0{
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xB1000 0x1000>;
+				interrupts = <35 2 36 2 40 2>;
+			};
+			queue-group@1{
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xB5000 0x1000>;
+				interrupts = <51 2 52 2 67 2>;
+			};
+		};
+
+		sdhci@2e000 {
+			compatible = "fsl,p1022-esdhc", "fsl,esdhc";
+			reg = <0x2e000 0x1000>;
+			interrupts = <72 0x2>;
+			fsl,sdhci-auto-cmd12;
+			/* Filled in by U-Boot */
+			clock-frequency = <0>;
+		};
+
+		crypto@30000 {
+			compatible = "fsl,sec3.3", "fsl,sec3.1", "fsl,sec3.0",
+				     "fsl,sec2.4", "fsl,sec2.2", "fsl,sec2.1",
+				     "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <45 2 58 2>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x97c>;
+			fsl,descriptor-types-mask = <0x3a30abf>;
+		};
+
+		sata@18000 {
+			compatible = "fsl,mpc8536-sata", "fsl,pq-sata";
+			reg = <0x18000 0x1000>;
+			cell-index = <1>;
+			interrupts = <74 0x2>;
+		};
+
+		sata@19000 {
+			compatible = "fsl,mpc8536-sata", "fsl,pq-sata";
+			reg = <0x19000 0x1000>;
+			cell-index = <2>;
+			interrupts = <41 0x2>;
+		};
+
+		power@e0070{
+			compatible = "fsl,mpc8536-pmc", "fsl,mpc8548-pmc";
+			reg = <0xe0070 0x20>;
+		};
+
+		display@10000 {
+			compatible = "fsl,diu", "fsl,p1022-diu";
+			reg = <0x10000 1000>;
+			interrupts = <64 2>;
+		};
+
+		timer@41100 {
+			compatible = "fsl,mpic-global-timer";
+			reg = <0x41100 0x204>;
+			interrupts = <0xf7 0x2>;
+		};
+
+		mpic: pic@40000 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x40000 0x40000>;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+		};
+
+		msi@41600 {
+			compatible = "fsl,p1022-msi", "fsl,mpic-msi";
+			reg = <0x41600 0x80>;
+			msi-available-ranges = <0 0x100>;
+			interrupts = <
+				0xe0 0
+				0xe1 0
+				0xe2 0
+				0xe3 0
+				0xe4 0
+				0xe5 0
+				0xe6 0
+				0xe7 0>;
+		};
+
+		global-utilities@e0000 {	//global utilities block
+			compatible = "fsl,p1022-guts";
+			reg = <0xe0000 0x1000>;
+			fsl,has-rstcr;
+		};
+	};
+
+	pci0: pcie@fffe09000 {
+		compatible = "fsl,p1022-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xf 0xffe09000 0 0x1000>;
+		bus-range = <0 255>;
+		ranges = <0x2000000 0x0 0xa0000000 0xc 0x20000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
+		clock-frequency = <33333333>;
+		interrupts = <16 2>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 4 1
+			0000 0 0 2 &mpic 5 1
+			0000 0 0 3 &mpic 6 1
+			0000 0 0 4 &mpic 7 1
+			>;
+		pcie@0 {
+			reg = <0x0 0x0 0x0 0x0 0x0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	pci1: pcie@fffe0a000 {
+		compatible = "fsl,p1022-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xf 0xffe0a000 0 0x1000>;
+		bus-range = <0 255>;
+		ranges = <0x2000000 0x0 0xc0000000 0xc 0x40000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0xf 0xffc20000 0x0 0x10000>;
+		clock-frequency = <33333333>;
+		interrupts = <16 2>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 0 1
+			0000 0 0 2 &mpic 1 1
+			0000 0 0 3 &mpic 2 1
+			0000 0 0 4 &mpic 3 1
+			>;
+		pcie@0 {
+			reg = <0x0 0x0 0x0 0x0 0x0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+
+	pci2: pcie@fffe0b000 {
+		compatible = "fsl,p1022-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xf 0xffe0b000 0 0x1000>;
+		bus-range = <0 255>;
+		ranges = <0x2000000 0x0 0x80000000 0xc 0x00000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>;
+		clock-frequency = <33333333>;
+		interrupts = <16 2>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 8 1
+			0000 0 0 2 &mpic 9 1
+			0000 0 0 3 &mpic 10 1
+			0000 0 0 4 &mpic 11 1
+			>;
+		pcie@0 {
+			reg = <0x0 0x0 0x0 0x0 0x0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/p4080ds.dts b/arch/powerpc/boot/dts/p4080ds.dts
index 6b29eab0536..2f0de24e382 100644
--- a/arch/powerpc/boot/dts/p4080ds.dts
+++ b/arch/powerpc/boot/dts/p4080ds.dts
@@ -280,6 +280,8 @@
 			reg = <0x114000 0x1000>;
 			interrupts = <48 2>;
 			interrupt-parent = <&mpic>;
+			voltage-ranges = <3300 3300>;
+			sdhci,auto-cmd12;
 		};
 
 		i2c@118000 {
diff --git a/arch/powerpc/boot/dts/pdm360ng.dts b/arch/powerpc/boot/dts/pdm360ng.dts
new file mode 100644
index 00000000000..94dfa5c9a7f
--- /dev/null
+++ b/arch/powerpc/boot/dts/pdm360ng.dts
@@ -0,0 +1,410 @@
+/*
+ * Device Tree Source for IFM PDM360NG.
+ *
+ * Copyright 2009 - 2010 DENX Software Engineering.
+ * Anatolij Gustschin <agust@denx.de>
+ *
+ * Based on MPC5121E ADS dts.
+ * Copyright 2008 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "pdm360ng";
+	compatible = "ifm,pdm360ng";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&ipic>;
+
+	aliases {
+		ethernet0 = &eth0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,5121@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <0x20>;	// 32 bytes
+			i-cache-line-size = <0x20>;	// 32 bytes
+			d-cache-size = <0x8000>;	// L1, 32K
+			i-cache-size = <0x8000>;	// L1, 32K
+			timebase-frequency = <49500000>;// 49.5 MHz (csb/4)
+			bus-frequency = <198000000>;	// 198 MHz csb bus
+			clock-frequency = <396000000>;	// 396 MHz ppc core
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;	// 512MB at 0
+	};
+
+	nfc@40000000 {
+		compatible = "fsl,mpc5121-nfc";
+		reg = <0x40000000 0x100000>;
+		interrupts = <0x6 0x8>;
+		#address-cells = <0x1>;
+		#size-cells = <0x1>;
+		bank-width = <0x1>;
+		chips = <0x1>;
+
+		partition@0 {
+			label = "nand0";
+			reg = <0x0 0x40000000>;
+		};
+	};
+
+	sram@50000000 {
+		compatible = "fsl,mpc5121-sram";
+		reg = <0x50000000 0x20000>;	// 128K at 0x50000000
+	};
+
+	localbus@80000020 {
+		compatible = "fsl,mpc5121-localbus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		reg = <0x80000020 0x40>;
+
+		ranges = <0x0 0x0 0xf0000000 0x10000000   /* Flash */
+			  0x2 0x0 0x50040000 0x00020000>; /* CS2: MRAM */
+
+		flash@0,0 {
+			compatible = "amd,s29gl01gp", "cfi-flash";
+			reg = <0 0x00000000 0x08000000
+			       0 0x08000000 0x08000000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			bank-width = <4>;
+			device-width = <2>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x00000000 0x00080000>;
+				read-only;
+			};
+			partition@80000 {
+				label = "environment";
+				reg = <0x00080000 0x00080000>;
+				read-only;
+			};
+			partition@100000 {
+				label = "splash-image";
+				reg = <0x00100000 0x00080000>;
+				read-only;
+			};
+			partition@180000 {
+				label = "device-tree";
+				reg = <0x00180000 0x00040000>;
+			};
+			partition@1c0000 {
+				label = "kernel";
+				reg = <0x001c0000 0x00500000>;
+			};
+			partition@6c0000 {
+				label = "filesystem";
+				reg = <0x006c0000 0x07940000>;
+			};
+		};
+
+		mram0@2,0 {
+			compatible = "mtd-ram";
+			reg = <2 0x00000 0x10000>;
+			bank-width = <2>;
+		};
+
+		mram1@2,10000 {
+			compatible = "mtd-ram";
+			reg = <2 0x010000 0x10000>;
+			bank-width = <2>;
+		};
+	};
+
+	soc@80000000 {
+		compatible = "fsl,mpc5121-immr";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		#interrupt-cells = <2>;
+		ranges = <0x0 0x80000000 0x400000>;
+		reg = <0x80000000 0x400000>;
+		bus-frequency = <66000000>;	// 66 MHz ips bus
+
+		// IPIC
+		// interrupts cell = <intr #, sense>
+		// sense values match linux IORESOURCE_IRQ_* defines:
+		// sense == 8: Level, low assertion
+		// sense == 2: Edge, high-to-low change
+		//
+		ipic: interrupt-controller@c00 {
+			compatible = "fsl,mpc5121-ipic", "fsl,ipic";
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0xc00 0x100>;
+		};
+
+		rtc@a00 {	// Real time clock
+			compatible = "fsl,mpc5121-rtc";
+			reg = <0xa00 0x100>;
+			interrupts = <79 0x8 80 0x8>;
+		};
+
+		reset@e00 {	// Reset module
+			compatible = "fsl,mpc5121-reset";
+			reg = <0xe00 0x100>;
+		};
+
+		clock@f00 {	// Clock control
+			compatible = "fsl,mpc5121-clock";
+			reg = <0xf00 0x100>;
+		};
+
+		pmc@1000{	//Power Management Controller
+			compatible = "fsl,mpc5121-pmc";
+			reg = <0x1000 0x100>;
+			interrupts = <83 0x2>;
+		};
+
+		gpio@1100 {
+			compatible = "fsl,mpc5121-gpio";
+			reg = <0x1100 0x100>;
+			interrupts = <78 0x8>;
+		};
+
+		can@1300 {
+			compatible = "fsl,mpc5121-mscan";
+			interrupts = <12 0x8>;
+			reg = <0x1300 0x80>;
+		};
+
+		can@1380 {
+			compatible = "fsl,mpc5121-mscan";
+			interrupts = <13 0x8>;
+			reg = <0x1380 0x80>;
+		};
+
+		i2c@1700 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5121-i2c";
+			reg = <0x1700 0x20>;
+			interrupts = <0x9 0x8>;
+			fsl,preserve-clocking;
+
+			eeprom@50 {
+				compatible = "at,24c01";
+				reg = <0x50>;
+			};
+
+			rtc@68 {
+				compatible = "stm,m41t00";
+				reg = <0x68>;
+			};
+		};
+
+		i2c@1740 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5121-i2c";
+			reg = <0x1740 0x20>;
+			interrupts = <0xb 0x8>;
+			fsl,preserve-clocking;
+		};
+
+		i2ccontrol@1760 {
+			compatible = "fsl,mpc5121-i2c-ctrl";
+			reg = <0x1760 0x8>;
+		};
+
+		axe@2000 {
+			compatible = "fsl,mpc5121-axe";
+			reg = <0x2000 0x100>;
+			interrupts = <42 0x8>;
+		};
+
+		display@2100 {
+			compatible = "fsl,mpc5121-diu";
+			reg = <0x2100 0x100>;
+			interrupts = <64 0x8>;
+		};
+
+		can@2300 {
+			compatible = "fsl,mpc5121-mscan";
+			interrupts = <90 0x8>;
+			reg = <0x2300 0x80>;
+		};
+
+		can@2380 {
+			compatible = "fsl,mpc5121-mscan";
+			interrupts = <91 0x8>;
+			reg = <0x2380 0x80>;
+		};
+
+		viu@2400 {
+			compatible = "fsl,mpc5121-viu";
+			reg = <0x2400 0x400>;
+			interrupts = <67 0x8>;
+		};
+
+		mdio@2800 {
+			compatible = "fsl,mpc5121-fec-mdio";
+			reg = <0x2800 0x200>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			phy: ethernet-phy@0 {
+				compatible = "smsc,lan8700";
+				reg = <0x1f>;
+			};
+		};
+
+		eth0: ethernet@2800 {
+			compatible = "fsl,mpc5121-fec";
+			reg = <0x2800 0x200>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <4 0x8>;
+			phy-handle = < &phy >;
+		};
+
+		// USB1 using external ULPI PHY
+		usb@3000 {
+			compatible = "fsl,mpc5121-usb2-dr";
+			reg = <0x3000 0x600>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <43 0x8>;
+			dr_mode = "host";
+			phy_type = "ulpi";
+		};
+
+		// USB0 using internal UTMI PHY
+		usb@4000 {
+			compatible = "fsl,mpc5121-usb2-dr";
+			reg = <0x4000 0x600>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <44 0x8>;
+			dr_mode = "otg";
+			phy_type = "utmi_wide";
+			fsl,invert-pwr-fault;
+		};
+
+		// IO control
+		ioctl@a000 {
+			compatible = "fsl,mpc5121-ioctl";
+			reg = <0xA000 0x1000>;
+		};
+
+		// 512x PSCs are not 52xx PSCs compatible
+		serial@11000 {
+			compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
+			cell-index = <0>;
+			reg = <0x11000 0x100>;
+			interrupts = <40 0x8>;
+			fsl,rx-fifo-size = <16>;
+			fsl,tx-fifo-size = <16>;
+		};
+
+		serial@11100 {
+			compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
+			cell-index = <1>;
+			reg = <0x11100 0x100>;
+			interrupts = <40 0x8>;
+			fsl,rx-fifo-size = <16>;
+			fsl,tx-fifo-size = <16>;
+		};
+
+		serial@11200 {
+			compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
+			cell-index = <2>;
+			reg = <0x11200 0x100>;
+			interrupts = <40 0x8>;
+			fsl,rx-fifo-size = <16>;
+			fsl,tx-fifo-size = <16>;
+		};
+
+		serial@11300 {
+			compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
+			cell-index = <3>;
+			reg = <0x11300 0x100>;
+			interrupts = <40 0x8>;
+			fsl,rx-fifo-size = <16>;
+			fsl,tx-fifo-size = <16>;
+		};
+
+		serial@11400 {
+			compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
+			cell-index = <4>;
+			reg = <0x11400 0x100>;
+			interrupts = <40 0x8>;
+			fsl,rx-fifo-size = <16>;
+			fsl,tx-fifo-size = <16>;
+		};
+
+		serial@11600 {
+			compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
+			cell-index = <6>;
+			reg = <0x11600 0x100>;
+			interrupts = <40 0x8>;
+			fsl,rx-fifo-size = <16>;
+			fsl,tx-fifo-size = <16>;
+		};
+
+		serial@11800 {
+			compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
+			cell-index = <8>;
+			reg = <0x11800 0x100>;
+			interrupts = <40 0x8>;
+			fsl,rx-fifo-size = <16>;
+			fsl,tx-fifo-size = <16>;
+		};
+
+		serial@11B00 {
+			compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
+			cell-index = <11>;
+			reg = <0x11B00 0x100>;
+			interrupts = <40 0x8>;
+			fsl,rx-fifo-size = <16>;
+			fsl,tx-fifo-size = <16>;
+		};
+
+		pscfifo@11f00 {
+			compatible = "fsl,mpc5121-psc-fifo";
+			reg = <0x11f00 0x100>;
+			interrupts = <40 0x8>;
+		};
+
+		spi@11900 {
+			compatible = "fsl,mpc5121-psc-spi", "fsl,mpc5121-psc";
+			cell-index = <9>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x11900 0x100>;
+			interrupts = <40 0x8>;
+			fsl,rx-fifo-size = <16>;
+			fsl,tx-fifo-size = <16>;
+
+			// 7845 touch screen controller
+			ts@0 {
+				compatible = "ti,ads7846";
+				reg = <0x0>;
+				spi-max-frequency = <3000000>;
+				// pen irq is GPIO25
+				interrupts = <78 0x8>;
+			};
+		};
+
+		dma@14000 {
+			compatible = "fsl,mpc5121-dma";
+			reg = <0x14000 0x1800>;
+			interrupts = <65 0x8>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/redwood.dts b/arch/powerpc/boot/dts/redwood.dts
index d2af32e2bf7..81636c01d90 100644
--- a/arch/powerpc/boot/dts/redwood.dts
+++ b/arch/powerpc/boot/dts/redwood.dts
@@ -234,10 +234,132 @@
 				has-inverted-stacr-oc;
 				has-new-stacr-staopc;
 			};
+		};
+		PCIE0: pciex@d00000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pciex-460sx", "ibm,plb-pciex";
+			primary;
+			port = <0x0>; /* port number */
+			reg = <0x0000000d 0x00000000 0x20000000	/* Config space access */
+			       0x0000000c 0x10000000 0x00001000>;	/* Registers */
+			dcr-reg = <0x100 0x020>;
+			sdr-base = <0x300>;
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed
+			 */
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000
+				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>;
+
+			/* Inbound 2GB range starting at 0 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
 
+			/* This drives busses 10 to 0x1f */
+			bus-range = <0x10 0x1f>;
+
+			/* Legacy interrupts (note the weird polarity, the bridge seems
+			 * to invert PCIe legacy interrupts).
+			 * We are de-swizzling here because the numbers are actually for
+			 * port of the root complex virtual P2P bridge. But I want
+			 * to avoid putting a node for it in the tree, so the numbers
+			 * below are basically de-swizzled numbers.
+			 * The real slot is on idsel 0, so the swizzling is 1:1
+			 */
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <
+				0x0 0x0 0x0 0x1 &UIC3 0x0 0x4 /* swizzled int A */
+				0x0 0x0 0x0 0x2 &UIC3 0x1 0x4 /* swizzled int B */
+				0x0 0x0 0x0 0x3 &UIC3 0x2 0x4 /* swizzled int C */
+				0x0 0x0 0x0 0x4 &UIC3 0x3 0x4 /* swizzled int D */>;
+		};
+
+		PCIE1: pciex@d20000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pciex-460sx", "ibm,plb-pciex";
+			primary;
+			port = <0x1>; /* port number */
+			reg = <0x0000000d 0x20000000 0x20000000	/* Config space access */
+			       0x0000000c 0x10001000 0x00001000>;	/* Registers */
+			dcr-reg = <0x120 0x020>;
+			sdr-base = <0x340>;
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed
+			 */
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x80000000 0x00000000 0x80000000
+				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80010000 0x00000000 0x00010000>;
+
+			/* Inbound 2GB range starting at 0 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
+
+			/* This drives busses 10 to 0x1f */
+			bus-range = <0x20 0x2f>;
+
+			/* Legacy interrupts (note the weird polarity, the bridge seems
+			 * to invert PCIe legacy interrupts).
+			 * We are de-swizzling here because the numbers are actually for
+			 * port of the root complex virtual P2P bridge. But I want
+			 * to avoid putting a node for it in the tree, so the numbers
+			 * below are basically de-swizzled numbers.
+			 * The real slot is on idsel 0, so the swizzling is 1:1
+			 */
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <
+				0x0 0x0 0x0 0x1 &UIC3 0x4 0x4 /* swizzled int A */
+				0x0 0x0 0x0 0x2 &UIC3 0x5 0x4 /* swizzled int B */
+				0x0 0x0 0x0 0x3 &UIC3 0x6 0x4 /* swizzled int C */
+				0x0 0x0 0x0 0x4 &UIC3 0x7 0x4 /* swizzled int D */>;
+		};
+
+		PCIE2: pciex@d40000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pciex-460sx", "ibm,plb-pciex";
+			primary;
+			port = <0x2>; /* port number */
+			reg = <0x0000000d 0x40000000 0x20000000	/* Config space access */
+			       0x0000000c 0x10002000 0x00001000>;	/* Registers */
+			dcr-reg = <0x140 0x020>;
+			sdr-base = <0x370>;
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed
+			 */
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000f 0x00000000 0x00000000 0x80000000
+				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80020000 0x00000000 0x00010000>;
+
+			/* Inbound 2GB range starting at 0 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
+
+			/* This drives busses 10 to 0x1f */
+			bus-range = <0x30 0x3f>;
+
+			/* Legacy interrupts (note the weird polarity, the bridge seems
+			 * to invert PCIe legacy interrupts).
+			 * We are de-swizzling here because the numbers are actually for
+			 * port of the root complex virtual P2P bridge. But I want
+			 * to avoid putting a node for it in the tree, so the numbers
+			 * below are basically de-swizzled numbers.
+			 * The real slot is on idsel 0, so the swizzling is 1:1
+			 */
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <
+				0x0 0x0 0x0 0x1 &UIC3 0x8 0x4 /* swizzled int A */
+				0x0 0x0 0x0 0x2 &UIC3 0x9 0x4 /* swizzled int B */
+				0x0 0x0 0x0 0x3 &UIC3 0xa 0x4 /* swizzled int C */
+				0x0 0x0 0x0 0x4 &UIC3 0xb 0x4 /* swizzled int D */>;
 		};
 
 	};
+
 	chosen {
 		linux,stdout-path = "/plb/opb/serial@ef600200";
 	};
diff --git a/arch/powerpc/boot/dts/stxssa8555.dts b/arch/powerpc/boot/dts/stxssa8555.dts
new file mode 100644
index 00000000000..49efd44057d
--- /dev/null
+++ b/arch/powerpc/boot/dts/stxssa8555.dts
@@ -0,0 +1,380 @@
+/*
+ * MPC8555-based STx GP3 Device Tree Source
+ *
+ * Copyright 2006, 2008 Freescale Semiconductor Inc.
+ *
+ * Copyright 2010 Silicon Turnkey Express LLC.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "stx,gp3";
+        compatible = "stx,gp3-8560", "stx,gp3";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8555@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			d-cache-line-size = <32>;	// 32 bytes
+			i-cache-line-size = <32>;	// 32 bytes
+			d-cache-size = <0x8000>;		// L1, 32K
+			i-cache-size = <0x8000>;		// L1, 32K
+			timebase-frequency = <0>;	//  33 MHz, from uboot
+			bus-frequency = <0>;	// 166 MHz
+			clock-frequency = <0>;	// 825 MHz, from uboot
+			next-level-cache = <&L2>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	soc8555@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "simple-bus";
+		ranges = <0x0 0xe0000000 0x100000>;
+		bus-frequency = <0>;
+
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <8>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,mpc8555-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		memory-controller@2000 {
+			compatible = "fsl,mpc8555-memory-controller";
+			reg = <0x2000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <18 2>;
+		};
+
+		L2: l2-cache-controller@20000 {
+			compatible = "fsl,mpc8555-l2-cache-controller";
+			reg = <0x20000 0x1000>;
+			cache-line-size = <32>;	// 32 bytes
+			cache-size = <0x40000>;	// L2, 256K
+			interrupt-parent = <&mpic>;
+			interrupts = <16 2>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+		};
+
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8555-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8555-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8555-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8555-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8555-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
+		enet0: ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <0>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			ranges = <0x0 0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <29 2 30 2 34 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi0>;
+			phy-handle = <&phy0>;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-mdio";
+				reg = <0x520 0x20>;
+
+				phy0: ethernet-phy@2 {
+					interrupt-parent = <&mpic>;
+					interrupts = <5 1>;
+					reg = <0x2>;
+					device_type = "ethernet-phy";
+				};
+				phy1: ethernet-phy@4 {
+					interrupt-parent = <&mpic>;
+					interrupts = <5 1>;
+					reg = <0x4>;
+					device_type = "ethernet-phy";
+				};
+				tbi0: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		enet1: ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <1>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <0x25000 0x1000>;
+			ranges = <0x0 0x25000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <35 2 36 2 40 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi1>;
+			phy-handle = <&phy1>;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi1: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4500 0x100>; 	// reg base, size
+			clock-frequency = <0>; 	// should we fill in in uboot?
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4600 0x100>;	// reg base, size
+			clock-frequency = <0>; 	// should we fill in in uboot?
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		crypto@30000 {
+			compatible = "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <45 2>;
+			interrupt-parent = <&mpic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x7e>;
+			fsl,descriptor-types-mask = <0x01010ebf>;
+		};
+
+		mpic: pic@40000 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x40000 0x40000>;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+		};
+
+		cpm@919c0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8555-cpm", "fsl,cpm2";
+			reg = <0x919c0 0x30>;
+			ranges;
+
+			muram@80000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x80000 0x10000>;
+
+				data@0 {
+					compatible = "fsl,cpm-muram-data";
+					reg = <0x0 0x2000 0x9000 0x1000>;
+				};
+			};
+
+			brg@919f0 {
+				compatible = "fsl,mpc8555-brg",
+				             "fsl,cpm2-brg",
+				             "fsl,cpm-brg";
+				reg = <0x919f0 0x10 0x915f0 0x10>;
+			};
+
+			cpmpic: pic@90c00 {
+				interrupt-controller;
+				#address-cells = <0>;
+				#interrupt-cells = <2>;
+				interrupts = <46 2>;
+				interrupt-parent = <&mpic>;
+				reg = <0x90c00 0x80>;
+				compatible = "fsl,mpc8555-cpm-pic", "fsl,cpm2-pic";
+			};
+		};
+	};
+
+	pci0: pci@e0008000 {
+		interrupt-map-mask = <0x1f800 0x0 0x0 0x7>;
+		interrupt-map = <
+
+			/* IDSEL 0x10 */
+			0x8000 0x0 0x0 0x1 &mpic 0x0 0x1
+			0x8000 0x0 0x0 0x2 &mpic 0x1 0x1
+			0x8000 0x0 0x0 0x3 &mpic 0x2 0x1
+			0x8000 0x0 0x0 0x4 &mpic 0x3 0x1
+
+			/* IDSEL 0x11 */
+			0x8800 0x0 0x0 0x1 &mpic 0x0 0x1
+			0x8800 0x0 0x0 0x2 &mpic 0x1 0x1
+			0x8800 0x0 0x0 0x3 &mpic 0x2 0x1
+			0x8800 0x0 0x0 0x4 &mpic 0x3 0x1
+
+			/* IDSEL 0x12 (Slot 1) */
+			0x9000 0x0 0x0 0x1 &mpic 0x0 0x1
+			0x9000 0x0 0x0 0x2 &mpic 0x1 0x1
+			0x9000 0x0 0x0 0x3 &mpic 0x2 0x1
+			0x9000 0x0 0x0 0x4 &mpic 0x3 0x1
+
+			/* IDSEL 0x13 (Slot 2) */
+			0x9800 0x0 0x0 0x1 &mpic 0x1 0x1
+			0x9800 0x0 0x0 0x2 &mpic 0x2 0x1
+			0x9800 0x0 0x0 0x3 &mpic 0x3 0x1
+			0x9800 0x0 0x0 0x4 &mpic 0x0 0x1
+
+			/* IDSEL 0x14 (Slot 3) */
+			0xa000 0x0 0x0 0x1 &mpic 0x2 0x1
+			0xa000 0x0 0x0 0x2 &mpic 0x3 0x1
+			0xa000 0x0 0x0 0x3 &mpic 0x0 0x1
+			0xa000 0x0 0x0 0x4 &mpic 0x1 0x1
+
+			/* IDSEL 0x15 (Slot 4) */
+			0xa800 0x0 0x0 0x1 &mpic 0x3 0x1
+			0xa800 0x0 0x0 0x2 &mpic 0x0 0x1
+			0xa800 0x0 0x0 0x3 &mpic 0x1 0x1
+			0xa800 0x0 0x0 0x4 &mpic 0x2 0x1
+
+			/* Bus 1 (Tundra Bridge) */
+			/* IDSEL 0x12 (ISA bridge) */
+			0x19000 0x0 0x0 0x1 &mpic 0x0 0x1
+			0x19000 0x0 0x0 0x2 &mpic 0x1 0x1
+			0x19000 0x0 0x0 0x3 &mpic 0x2 0x1
+			0x19000 0x0 0x0 0x4 &mpic 0x3 0x1>;
+		interrupt-parent = <&mpic>;
+		interrupts = <24 2>;
+		bus-range = <0 0>;
+		ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000
+			  0x1000000 0x0 0x0 0xe2000000 0x0 0x100000>;
+		clock-frequency = <66666666>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xe0008000 0x1000>;
+		compatible = "fsl,mpc8540-pci";
+		device_type = "pci";
+
+		i8259@19000 {
+			interrupt-controller;
+			device_type = "interrupt-controller";
+			reg = <0x19000 0x0 0x0 0x0 0x1>;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			compatible = "chrp,iic";
+			interrupts = <1>;
+			interrupt-parent = <&pci0>;
+		};
+	};
+
+	pci1: pci@e0009000 {
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+
+			/* IDSEL 0x15 */
+			0xa800 0x0 0x0 0x1 &mpic 0xb 0x1
+			0xa800 0x0 0x0 0x2 &mpic 0xb 0x1
+			0xa800 0x0 0x0 0x3 &mpic 0xb 0x1
+			0xa800 0x0 0x0 0x4 &mpic 0xb 0x1>;
+		interrupt-parent = <&mpic>;
+		interrupts = <25 2>;
+		bus-range = <0 0>;
+		ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
+			  0x1000000 0x0 0x0 0xe3000000 0x0 0x100000>;
+		clock-frequency = <66666666>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xe0009000 0x1000>;
+		compatible = "fsl,mpc8540-pci";
+		device_type = "pci";
+	};
+};
diff --git a/arch/powerpc/boot/dts/tqm8540.dts b/arch/powerpc/boot/dts/tqm8540.dts
index 71347537b83..15ca731bc24 100644
--- a/arch/powerpc/boot/dts/tqm8540.dts
+++ b/arch/powerpc/boot/dts/tqm8540.dts
@@ -289,7 +289,14 @@
 		interrupt-map = <
 				/* IDSEL 28 */
 				 0xe000 0 0 1 &mpic 2 1
-				 0xe000 0 0 2 &mpic 3 1>;
+				 0xe000 0 0 2 &mpic 3 1
+				 0xe000 0 0 3 &mpic 6 1
+				 0xe000 0 0 4 &mpic 5 1
+
+				/* IDSEL 11 */
+				 0x5800 0 0 1 &mpic 6 1
+				 0x5800 0 0 2 &mpic 5 1
+				 >;
 
 		interrupt-parent = <&mpic>;
 		interrupts = <24 2>;
diff --git a/arch/powerpc/boot/dts/tqm8541.dts b/arch/powerpc/boot/dts/tqm8541.dts
index b30f63753d4..f49d0918131 100644
--- a/arch/powerpc/boot/dts/tqm8541.dts
+++ b/arch/powerpc/boot/dts/tqm8541.dts
@@ -311,7 +311,14 @@
 		interrupt-map = <
 				/* IDSEL 28 */
 				 0xe000 0 0 1 &mpic 2 1
-				 0xe000 0 0 2 &mpic 3 1>;
+				 0xe000 0 0 2 &mpic 3 1
+				 0xe000 0 0 3 &mpic 6 1
+				 0xe000 0 0 4 &mpic 5 1
+
+				/* IDSEL 11 */
+				 0x5800 0 0 1 &mpic 6 1
+				 0x5800 0 0 2 &mpic 5 1
+				 >;
 
 		interrupt-parent = <&mpic>;
 		interrupts = <24 2>;
diff --git a/arch/powerpc/boot/dts/tqm8548-bigflash.dts b/arch/powerpc/boot/dts/tqm8548-bigflash.dts
index 61f25e15fd6..5dbb36edb03 100644
--- a/arch/powerpc/boot/dts/tqm8548-bigflash.dts
+++ b/arch/powerpc/boot/dts/tqm8548-bigflash.dts
@@ -442,7 +442,14 @@
 		interrupt-map = <
 				/* IDSEL 28 */
 				 0xe000 0 0 1 &mpic 2 1
-				 0xe000 0 0 2 &mpic 3 1>;
+				 0xe000 0 0 2 &mpic 3 1
+				 0xe000 0 0 3 &mpic 6 1
+				 0xe000 0 0 4 &mpic 5 1
+
+				/* IDSEL 11 */
+				 0x5800 0 0 1 &mpic 6 1
+				 0x5800 0 0 2 &mpic 5 1
+				 >;
 
 		interrupt-parent = <&mpic>;
 		interrupts = <24 2>;
diff --git a/arch/powerpc/boot/dts/tqm8548.dts b/arch/powerpc/boot/dts/tqm8548.dts
index 025759c7c95..a050ae42710 100644
--- a/arch/powerpc/boot/dts/tqm8548.dts
+++ b/arch/powerpc/boot/dts/tqm8548.dts
@@ -442,7 +442,14 @@
 		interrupt-map = <
 				/* IDSEL 28 */
 				 0xe000 0 0 1 &mpic 2 1
-				 0xe000 0 0 2 &mpic 3 1>;
+				 0xe000 0 0 2 &mpic 3 1
+				 0xe000 0 0 3 &mpic 6 1
+				 0xe000 0 0 4 &mpic 5 1
+
+				/* IDSEL 11 */
+				 0x5800 0 0 1 &mpic 6 1
+				 0x5800 0 0 2 &mpic 5 1
+				 >;
 
 		interrupt-parent = <&mpic>;
 		interrupts = <24 2>;
diff --git a/arch/powerpc/boot/dts/tqm8555.dts b/arch/powerpc/boot/dts/tqm8555.dts
index 95e28738183..81bad8cd375 100644
--- a/arch/powerpc/boot/dts/tqm8555.dts
+++ b/arch/powerpc/boot/dts/tqm8555.dts
@@ -311,7 +311,14 @@
 		interrupt-map = <
 				/* IDSEL 28 */
 				 0xe000 0 0 1 &mpic 2 1
-				 0xe000 0 0 2 &mpic 3 1>;
+				 0xe000 0 0 2 &mpic 3 1
+				 0xe000 0 0 3 &mpic 6 1
+				 0xe000 0 0 4 &mpic 5 1
+
+				/* IDSEL 11 */
+				 0x5800 0 0 1 &mpic 6 1
+				 0x5800 0 0 2 &mpic 5 1
+				 >;
 
 		interrupt-parent = <&mpic>;
 		interrupts = <24 2>;
diff --git a/arch/powerpc/boot/dts/tqm8560.dts b/arch/powerpc/boot/dts/tqm8560.dts
index ff70580a8f4..22ec39b5bee 100644
--- a/arch/powerpc/boot/dts/tqm8560.dts
+++ b/arch/powerpc/boot/dts/tqm8560.dts
@@ -382,7 +382,14 @@
 		interrupt-map = <
 				/* IDSEL 28 */
 				 0xe000 0 0 1 &mpic 2 1
-				 0xe000 0 0 2 &mpic 3 1>;
+				 0xe000 0 0 2 &mpic 3 1
+				 0xe000 0 0 3 &mpic 6 1
+				 0xe000 0 0 4 &mpic 5 1
+
+				/* IDSEL 11 */
+				 0x5800 0 0 1 &mpic 6 1
+				 0x5800 0 0 2 &mpic 5 1
+				 >;
 
 		interrupt-parent = <&mpic>;
 		interrupts = <24 2>;
diff --git a/arch/powerpc/boot/dts/tqm8xx.dts b/arch/powerpc/boot/dts/tqm8xx.dts
new file mode 100644
index 00000000000..f6da7ec49a8
--- /dev/null
+++ b/arch/powerpc/boot/dts/tqm8xx.dts
@@ -0,0 +1,172 @@
+/*
+ * TQM8XX Device Tree Source
+ *
+ * Heiko Schocher <hs@denx.de>
+ * 2010 DENX Software Engineering GmbH
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "TQM8xx";
+	compatible = "tqc,tqm8xx";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &eth0;
+		ethernet1 = &eth1;
+		mdio1 = &phy1;
+		serial0 = &smc1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,860@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			d-cache-line-size = <16>;	// 16 bytes
+			i-cache-line-size = <16>;	// 16 bytes
+			d-cache-size = <0x1000>;		// L1, 4K
+			i-cache-size = <0x1000>;		// L1, 4K
+			timebase-frequency = <0>;
+			bus-frequency = <0>;
+			clock-frequency = <0>;
+			interrupts = <15 2>;	// decrementer interrupt
+			interrupt-parent = <&PIC>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x2000000>;
+	};
+
+	localbus@fff00100 {
+		compatible = "fsl,mpc860-localbus", "fsl,pq1-localbus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		reg = <0xfff00100 0x40>;
+
+		ranges = <
+			0x0 0x0 0x40000000 0x800000
+		>;
+
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 0x800000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			bank-width = <4>;
+			device-width = <2>;
+		};
+	};
+
+	soc@fff00000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		ranges = <0x0 0xfff00000 0x00004000>;
+
+		phy1: mdio@e00 {
+			compatible = "fsl,mpc866-fec-mdio", "fsl,pq1-fec-mdio";
+			reg = <0xe00 0x188>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			PHY: ethernet-phy@f {
+				reg = <0xf>;
+				device_type = "ethernet-phy";
+			};
+		};
+
+		eth1: ethernet@e00 {
+			device_type = "network";
+			compatible = "fsl,mpc866-fec-enet",
+			             "fsl,pq1-fec-enet";
+			reg = <0xe00 0x188>;
+			interrupts = <3 1>;
+			interrupt-parent = <&PIC>;
+			phy-handle = <&PHY>;
+			linux,network-index = <1>;
+		};
+
+		PIC: pic@0 {
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x0 0x24>;
+			compatible = "fsl,mpc860-pic", "fsl,pq1-pic";
+		};
+
+		cpm@9c0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc860-cpm", "fsl,cpm1";
+			ranges;
+			reg = <0x9c0 0x40>;
+			brg-frequency = <0>;
+			interrupts = <0 2>;	// cpm error interrupt
+			interrupt-parent = <&CPM_PIC>;
+
+			muram@2000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x2000 0x2000>;
+
+				data@0 {
+					compatible = "fsl,cpm-muram-data";
+					reg = <0x0 0x2000>;
+				};
+			};
+
+			brg@9f0 {
+				compatible = "fsl,mpc860-brg",
+					     "fsl,cpm1-brg",
+					     "fsl,cpm-brg";
+				reg = <0x9f0 0x10>;
+				clock-frequency = <0>;
+			};
+
+			CPM_PIC: pic@930 {
+				interrupt-controller;
+				#address-cells = <0>;
+				#interrupt-cells = <1>;
+				interrupts = <5 2 0 2>;
+				interrupt-parent = <&PIC>;
+				reg = <0x930 0x20>;
+				compatible = "fsl,mpc860-cpm-pic",
+				             "fsl,cpm1-pic";
+			};
+
+
+			smc1: serial@a80 {
+				device_type = "serial";
+				compatible = "fsl,mpc860-smc-uart",
+				             "fsl,cpm1-smc-uart";
+				reg = <0xa80 0x10 0x3e80 0x40>;
+				interrupts = <4>;
+				interrupt-parent = <&CPM_PIC>;
+				fsl,cpm-brg = <1>;
+				fsl,cpm-command = <0x90>;
+			};
+
+			eth0: ethernet@a00 {
+				device_type = "network";
+				compatible = "fsl,mpc860-scc-enet",
+				             "fsl,cpm1-scc-enet";
+				reg = <0xa00 0x18 0x3c00 0x100>;
+				interrupts = <30>;
+				interrupt-parent = <&CPM_PIC>;
+				fsl,cpm-command = <0000>;
+				linux,network-index = <0>;
+				fixed-link = <0 0 10 0 0>;
+			};
+		};
+	};
+};