Merge git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6

23 files changed, 639 insertions, 34 deletions

diff --git a/arch/powerpc/boot/addRamDisk.c b/arch/powerpc/boot/addRamDisk.c
index c02a99952be..893f446cbd2 100644
--- a/arch/powerpc/boot/addRamDisk.c
+++ b/arch/powerpc/boot/addRamDisk.c
@@ -58,7 +58,7 @@ static int check_elf64(void *p, int size, struct addr_range *r)
 
 	return 64;
 }
-void get4k(FILE *file, char *buf )
+static void get4k(FILE *file, char *buf )
 {
 	unsigned j;
 	unsigned num = fread(buf, 1, 4096, file);
@@ -66,12 +66,12 @@ void get4k(FILE *file, char *buf )
 		buf[j] = 0;
 }
 
-void put4k(FILE *file, char *buf )
+static void put4k(FILE *file, char *buf )
 {
 	fwrite(buf, 1, 4096, file);
 }
 
-void death(const char *msg, FILE *fdesc, const char *fname) 
+static void death(const char *msg, FILE *fdesc, const char *fname)
 {
 	fprintf(stderr, msg);
 	fclose(fdesc);
diff --git a/arch/powerpc/boot/dts/cm5200.dts b/arch/powerpc/boot/dts/cm5200.dts
index cee8080aa24..dd3860846f1 100644
--- a/arch/powerpc/boot/dts/cm5200.dts
+++ b/arch/powerpc/boot/dts/cm5200.dts
@@ -210,7 +210,6 @@
 			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
 			reg = <0x3d40 0x40>;
 			interrupts = <2 16 0>;
-			fsl5200-clocking;
 		};
 
 		sram@8000 {
diff --git a/arch/powerpc/boot/dts/digsy_mtc.dts b/arch/powerpc/boot/dts/digsy_mtc.dts
index 4c36186ef94..8e9be6bfe23 100644
--- a/arch/powerpc/boot/dts/digsy_mtc.dts
+++ b/arch/powerpc/boot/dts/digsy_mtc.dts
@@ -199,7 +199,6 @@
 			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
 			reg = <0x3d00 0x40>;
 			interrupts = <2 15 0>;
-			fsl5200-clocking;
 
 			rtc@50 {
 				compatible = "at,24c08";
diff --git a/arch/powerpc/boot/dts/lite5200.dts b/arch/powerpc/boot/dts/lite5200.dts
index de30b3f9eb2..82ff2b13bc3 100644
--- a/arch/powerpc/boot/dts/lite5200.dts
+++ b/arch/powerpc/boot/dts/lite5200.dts
@@ -247,7 +247,6 @@
 			compatible = "fsl,mpc5200-i2c","fsl-i2c";
 			reg = <0x3d00 0x40>;
 			interrupts = <2 15 0>;
-			fsl5200-clocking;
 		};
 
 		i2c@3d40 {
@@ -256,7 +255,6 @@
 			compatible = "fsl,mpc5200-i2c","fsl-i2c";
 			reg = <0x3d40 0x40>;
 			interrupts = <2 16 0>;
-			fsl5200-clocking;
 		};
 		sram@8000 {
 			compatible = "fsl,mpc5200-sram";
diff --git a/arch/powerpc/boot/dts/lite5200b.dts b/arch/powerpc/boot/dts/lite5200b.dts
index d13cb11ce62..e45a63be3a8 100644
--- a/arch/powerpc/boot/dts/lite5200b.dts
+++ b/arch/powerpc/boot/dts/lite5200b.dts
@@ -251,7 +251,6 @@
 			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
 			reg = <0x3d00 0x40>;
 			interrupts = <2 15 0>;
-			fsl5200-clocking;
 		};
 
 		i2c@3d40 {
@@ -260,7 +259,6 @@
 			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
 			reg = <0x3d40 0x40>;
 			interrupts = <2 16 0>;
-			fsl5200-clocking;
 		};
 
 		sram@8000 {
diff --git a/arch/powerpc/boot/dts/media5200.dts b/arch/powerpc/boot/dts/media5200.dts
index e297d8b4187..0c3902bc5b6 100644
--- a/arch/powerpc/boot/dts/media5200.dts
+++ b/arch/powerpc/boot/dts/media5200.dts
@@ -223,7 +223,6 @@
 			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
 			reg = <0x3d00 0x40>;
 			interrupts = <2 15 0>;
-			fsl5200-clocking;
 		};
 
 		i2c@3d40 {
@@ -232,7 +231,6 @@
 			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
 			reg = <0x3d40 0x40>;
 			interrupts = <2 16 0>;
-			fsl5200-clocking;
 		};
 
 		sram@8000 {
diff --git a/arch/powerpc/boot/dts/motionpro.dts b/arch/powerpc/boot/dts/motionpro.dts
index 7be8ca03867..6ca4fc144a3 100644
--- a/arch/powerpc/boot/dts/motionpro.dts
+++ b/arch/powerpc/boot/dts/motionpro.dts
@@ -222,7 +222,6 @@
 			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
 			reg = <0x3d40 0x40>;
 			interrupts = <2 16 0>;
-			fsl5200-clocking;
 
 			rtc@68 {
 				compatible = "dallas,ds1339";
diff --git a/arch/powerpc/boot/dts/mpc5121ads.dts b/arch/powerpc/boot/dts/mpc5121ads.dts
index c2b8dbfab79..c353dac3341 100644
--- a/arch/powerpc/boot/dts/mpc5121ads.dts
+++ b/arch/powerpc/boot/dts/mpc5121ads.dts
@@ -209,7 +209,6 @@
 			reg = <0x1700 0x20>;
 			interrupts = <9 0x8>;
 			interrupt-parent = < &ipic >;
-			fsl5200-clocking;
 		};
 
 		i2c@1720 {
@@ -220,7 +219,6 @@
 			reg = <0x1720 0x20>;
 			interrupts = <10 0x8>;
 			interrupt-parent = < &ipic >;
-			fsl5200-clocking;
 		};
 
 		i2c@1740 {
@@ -231,7 +229,6 @@
 			reg = <0x1740 0x20>;
 			interrupts = <11 0x8>;
 			interrupt-parent = < &ipic >;
-			fsl5200-clocking;
 		};
 
 		i2ccontrol@1760 {
diff --git a/arch/powerpc/boot/dts/mpc8377_mds.dts b/arch/powerpc/boot/dts/mpc8377_mds.dts
index f32c2811c6d..855782c5e5e 100644
--- a/arch/powerpc/boot/dts/mpc8377_mds.dts
+++ b/arch/powerpc/boot/dts/mpc8377_mds.dts
@@ -159,6 +159,7 @@
 				reg = <0x2e000 0x1000>;
 				interrupts = <42 0x8>;
 				interrupt-parent = <&ipic>;
+				sdhci,wp-inverted;
 				/* Filled in by U-Boot */
 				clock-frequency = <0>;
 			};
diff --git a/arch/powerpc/boot/dts/mpc8377_rdb.dts b/arch/powerpc/boot/dts/mpc8377_rdb.dts
index 28e022ac417..9e2264b1000 100644
--- a/arch/powerpc/boot/dts/mpc8377_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8377_rdb.dts
@@ -173,6 +173,7 @@
 				reg = <0x2e000 0x1000>;
 				interrupts = <42 0x8>;
 				interrupt-parent = <&ipic>;
+				sdhci,wp-inverted;
 				/* Filled in by U-Boot */
 				clock-frequency = <111111111>;
 			};
diff --git a/arch/powerpc/boot/dts/mpc8377_wlan.dts b/arch/powerpc/boot/dts/mpc8377_wlan.dts
index 3febc4e91b1..9ea78305696 100644
--- a/arch/powerpc/boot/dts/mpc8377_wlan.dts
+++ b/arch/powerpc/boot/dts/mpc8377_wlan.dts
@@ -67,7 +67,7 @@
 			device-width = <1>;
 
 			partition@0 {
-				reg = <0 0x8000>;
+				reg = <0 0x80000>;
 				label = "u-boot";
 				read-only;
 			};
@@ -150,6 +150,7 @@
 				reg = <0x2e000 0x1000>;
 				interrupts = <42 0x8>;
 				interrupt-parent = <&ipic>;
+				sdhci,wp-inverted;
 				clock-frequency = <133333333>;
 			};
 		};
diff --git a/arch/powerpc/boot/dts/mpc8378_mds.dts b/arch/powerpc/boot/dts/mpc8378_mds.dts
index f720ab9af30..f70cf600083 100644
--- a/arch/powerpc/boot/dts/mpc8378_mds.dts
+++ b/arch/powerpc/boot/dts/mpc8378_mds.dts
@@ -159,6 +159,7 @@
 				reg = <0x2e000 0x1000>;
 				interrupts = <42 0x8>;
 				interrupt-parent = <&ipic>;
+				sdhci,wp-inverted;
 				/* Filled in by U-Boot */
 				clock-frequency = <0>;
 			};
diff --git a/arch/powerpc/boot/dts/mpc8378_rdb.dts b/arch/powerpc/boot/dts/mpc8378_rdb.dts
index a11ead8214b..4e6a1a407bb 100644
--- a/arch/powerpc/boot/dts/mpc8378_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8378_rdb.dts
@@ -173,6 +173,7 @@
 				reg = <0x2e000 0x1000>;
 				interrupts = <42 0x8>;
 				interrupt-parent = <&ipic>;
+				sdhci,wp-inverted;
 				/* Filled in by U-Boot */
 				clock-frequency = <111111111>;
 			};
diff --git a/arch/powerpc/boot/dts/mpc8379_mds.dts b/arch/powerpc/boot/dts/mpc8379_mds.dts
index 4fa221fd9bd..645ec51cc6e 100644
--- a/arch/powerpc/boot/dts/mpc8379_mds.dts
+++ b/arch/powerpc/boot/dts/mpc8379_mds.dts
@@ -157,6 +157,7 @@
 				reg = <0x2e000 0x1000>;
 				interrupts = <42 0x8>;
 				interrupt-parent = <&ipic>;
+				sdhci,wp-inverted;
 				/* Filled in by U-Boot */
 				clock-frequency = <0>;
 			};
diff --git a/arch/powerpc/boot/dts/mpc8379_rdb.dts b/arch/powerpc/boot/dts/mpc8379_rdb.dts
index e35dfba587c..72336d50452 100644
--- a/arch/powerpc/boot/dts/mpc8379_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8379_rdb.dts
@@ -171,6 +171,7 @@
 				reg = <0x2e000 0x1000>;
 				interrupts = <42 0x8>;
 				interrupt-parent = <&ipic>;
+				sdhci,wp-inverted;
 				/* Filled in by U-Boot */
 				clock-frequency = <111111111>;
 			};
diff --git a/arch/powerpc/boot/dts/mpc8569mds.dts b/arch/powerpc/boot/dts/mpc8569mds.dts
index 06332d61830..1e3ec8f059b 100644
--- a/arch/powerpc/boot/dts/mpc8569mds.dts
+++ b/arch/powerpc/boot/dts/mpc8569mds.dts
@@ -487,8 +487,8 @@
 				 &qe_pio_f 5 0   /* USBTN */
 				 &qe_pio_f 6 0   /* USBRP */
 				 &qe_pio_f 8 0   /* USBRN */
-				 &bcsr17   6 0   /* SPEED */
-				 &bcsr17   5 1>; /* POWER */
+				 &bcsr17   1 0   /* SPEED */
+				 &bcsr17   2 0>; /* POWER */
 		};
 
 		enet0: ucc@2000 {
diff --git a/arch/powerpc/boot/dts/mucmc52.dts b/arch/powerpc/boot/dts/mucmc52.dts
new file mode 100644
index 00000000000..b72a7581d79
--- /dev/null
+++ b/arch/powerpc/boot/dts/mucmc52.dts
@@ -0,0 +1,332 @@
+/*
+ * Manroland mucmc52 board Device Tree Source
+ *
+ * Copyright (C) 2009 DENX Software Engineering GmbH
+ * Heiko Schocher <hs@denx.de>
+ * Copyright 2006-2007 Secret Lab Technologies Ltd.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "manroland,mucmc52";
+	compatible = "manroland,mucmc52";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&mpc5200_pic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,5200@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <0x4000>;	// L1, 16K
+			i-cache-size = <0x4000>;	// L1, 16K
+			timebase-frequency = <0>;	// from bootloader
+			bus-frequency = <0>;		// from bootloader
+			clock-frequency = <0>;		// from bootloader
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x04000000>;	// 64MB
+	};
+
+	soc5200@f0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc5200b-immr";
+		ranges = <0 0xf0000000 0x0000c000>;
+		reg = <0xf0000000 0x00000100>;
+		bus-frequency = <0>;		// from bootloader
+		system-frequency = <0>;		// from bootloader
+
+		cdm@200 {
+			compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
+			reg = <0x200 0x38>;
+		};
+
+		mpc5200_pic: interrupt-controller@500 {
+			// 5200 interrupts are encoded into two levels;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
+			reg = <0x500 0x80>;
+		};
+
+		gpt0: timer@600 {	// GPT 0 in GPIO mode
+			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			reg = <0x600 0x10>;
+			interrupts = <1 9 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpt1: timer@610 {	// General Purpose Timer in GPIO mode
+			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			reg = <0x610 0x10>;
+			interrupts = <1 10 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpt2: timer@620 {	// General Purpose Timer in GPIO mode
+			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			reg = <0x620 0x10>;
+			interrupts = <1 11 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpt3: timer@630 {	// General Purpose Timer in GPIO mode
+			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			reg = <0x630 0x10>;
+			interrupts = <1 12 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpio_simple: gpio@b00 {
+			compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
+			reg = <0xb00 0x40>;
+			interrupts = <1 7 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpio_wkup: gpio@c00 {
+			compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
+			reg = <0xc00 0x40>;
+			interrupts = <1 8 0 0 3 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		dma-controller@1200 {
+			compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
+			reg = <0x1200 0x80>;
+			interrupts = <3 0 0  3 1 0  3 2 0  3 3 0
+			              3 4 0  3 5 0  3 6 0  3 7 0
+			              3 8 0  3 9 0  3 10 0  3 11 0
+			              3 12 0  3 13 0  3 14 0  3 15 0>;
+		};
+
+		xlb@1f00 {
+			compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
+			reg = <0x1f00 0x100>;
+		};
+
+		serial@2000 { /* PSC1 in UART mode */
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+			reg = <0x2000 0x100>;
+			interrupts = <2 1 0>;
+		};
+
+		serial@2200 { /* PSC2 in UART mode */
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+			reg = <0x2200 0x100>;
+			interrupts = <2 2 0>;
+		};
+
+		serial@2c00 { /* PSC6 in UART mode */
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+			reg = <0x2c00 0x100>;
+			interrupts = <2 4 0>;
+		};
+
+		ethernet@3000 {
+			compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
+			reg = <0x3000 0x400>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <2 5 0>;
+			phy-handle = <&phy0>;
+		};
+
+		mdio@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
+			reg = <0x3000 0x400>; 	// fec range, since we need to setup fec interrupts
+			interrupts = <2 5 0>; 	// these are for "mii command finished", not link changes & co.
+
+			phy0: ethernet-phy@0 {
+				compatible = "intel,lxt971";
+				reg = <0>;
+			};
+		};
+
+		ata@3a00 {
+			compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
+			reg = <0x3a00 0x100>;
+			interrupts = <2 7 0>;
+		};
+
+		i2c@3d40 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
+			reg = <0x3d40 0x40>;
+			interrupts = <2 16 0>;
+			hwmon@2c {
+				compatible = "ad,adm9240";
+				reg = <0x2c>;
+			};
+			rtc@51 {
+				compatible = "nxp,pcf8563";
+				reg = <0x51>;
+			};
+		};
+
+		sram@8000 {
+			compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
+			reg = <0x8000 0x4000>;
+		};
+	};
+
+	pci@f0000d00 {
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci";
+		reg = <0xf0000d00 0x100>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+				/* IDSEL 0x10 */
+				0x8000 0 0 1 &mpc5200_pic 0 3 3
+				0x8000 0 0 2 &mpc5200_pic 0 3 3
+				0x8000 0 0 3 &mpc5200_pic 0 2 3
+				0x8000 0 0 4 &mpc5200_pic 0 1 3
+				>;
+		clock-frequency = <0>; // From boot loader
+		interrupts = <2 8 0 2 9 0 2 10 0>;
+		bus-range = <0 0>;
+		ranges = <0x42000000 0 0x60000000 0x60000000 0 0x10000000
+			  0x02000000 0 0x90000000 0x90000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xa0000000 0 0x01000000>;
+	};
+
+	localbus {
+		compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus";
+
+		#address-cells = <2>;
+		#size-cells = <1>;
+
+		ranges = <0 0 0xff800000 0x00800000
+			  1 0 0x80000000 0x00800000
+			  3 0 0x80000000 0x00800000>;
+
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 0x00800000>;
+			bank-width = <4>;
+			device-width = <2>;
+			#size-cells = <1>;
+			#address-cells = <1>;
+			partition@0 {
+				label = "DTS";
+				reg = <0x0 0x00100000>;
+			};
+			partition@100000 {
+				label = "Kernel";
+				reg = <0x100000 0x00200000>;
+			};
+			partition@300000 {
+				label = "RootFS";
+				reg = <0x00300000 0x00200000>;
+			};
+			partition@500000 {
+				label = "user";
+				reg = <0x00500000 0x00200000>;
+			};
+			partition@700000 {
+				label = "U-Boot";
+				reg = <0x00700000 0x00040000>;
+			};
+			partition@740000 {
+				label = "Env";
+				reg = <0x00740000 0x00020000>;
+			};
+			partition@760000 {
+				label = "red. Env";
+				reg = <0x00760000 0x00020000>;
+			};
+			partition@780000 {
+				label = "reserve";
+				reg = <0x00780000 0x00080000>;
+			};
+		};
+
+		simple100: gpio-controller-100@3,600100 {
+			compatible = "manroland,mucmc52-aux-gpio";
+			reg = <3 0x00600100 0x1>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+		simple104: gpio-controller-104@3,600104 {
+			compatible = "manroland,mucmc52-aux-gpio";
+			reg = <3 0x00600104 0x1>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+		simple200: gpio-controller-200@3,600200 {
+			compatible = "manroland,mucmc52-aux-gpio";
+			reg = <3 0x00600200 0x1>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+		simple201: gpio-controller-201@3,600201 {
+			compatible = "manroland,mucmc52-aux-gpio";
+			reg = <3 0x00600201 0x1>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+		simple202: gpio-controller-202@3,600202 {
+			compatible = "manroland,mucmc52-aux-gpio";
+			reg = <3 0x00600202 0x1>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+		simple203: gpio-controller-203@3,600203 {
+			compatible = "manroland,mucmc52-aux-gpio";
+			reg = <3 0x00600203 0x1>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+		simple204: gpio-controller-204@3,600204 {
+			compatible = "manroland,mucmc52-aux-gpio";
+			reg = <3 0x00600204 0x1>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+		simple206: gpio-controller-206@3,600206 {
+			compatible = "manroland,mucmc52-aux-gpio";
+			reg = <3 0x00600206 0x1>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+		simple207: gpio-controller-207@3,600207 {
+			compatible = "manroland,mucmc52-aux-gpio";
+			reg = <3 0x00600207 0x1>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+		simple20f: gpio-controller-20f@3,60020f {
+			compatible = "manroland,mucmc52-aux-gpio";
+			reg = <3 0x0060020f 0x1>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+	};
+};
diff --git a/arch/powerpc/boot/dts/pcm030.dts b/arch/powerpc/boot/dts/pcm030.dts
index 30bfdc04c6d..8a4ec30b21a 100644
--- a/arch/powerpc/boot/dts/pcm030.dts
+++ b/arch/powerpc/boot/dts/pcm030.dts
@@ -244,7 +244,6 @@
 			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
 			reg = <0x3d00 0x40>;
 			interrupts = <2 15 0>;
-			fsl5200-clocking;
 		};
 
 		i2c@3d40 {
@@ -253,7 +252,6 @@
 			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
 			reg = <0x3d40 0x40>;
 			interrupts = <2 16 0>;
-			fsl5200-clocking;
 			rtc@51 {
 				compatible = "nxp,pcf8563";
 				reg = <0x51>;
diff --git a/arch/powerpc/boot/dts/pcm032.dts b/arch/powerpc/boot/dts/pcm032.dts
index 03004267839..85d857a5d46 100644
--- a/arch/powerpc/boot/dts/pcm032.dts
+++ b/arch/powerpc/boot/dts/pcm032.dts
@@ -244,7 +244,6 @@
 			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
 			reg = <0x3d00 0x40>;
 			interrupts = <2 15 0>;
-			fsl5200-clocking;
 		};
 
 		i2c@3d40 {
@@ -253,7 +252,6 @@
 			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
 			reg = <0x3d40 0x40>;
 			interrupts = <2 16 0>;
-			fsl5200-clocking;
 			rtc@51 {
 				compatible = "nxp,pcf8563";
 				reg = <0x51>;
diff --git a/arch/powerpc/boot/dts/sbc8548.dts b/arch/powerpc/boot/dts/sbc8548.dts
index 9eefe00ed25..94a33225171 100644
--- a/arch/powerpc/boot/dts/sbc8548.dts
+++ b/arch/powerpc/boot/dts/sbc8548.dts
@@ -26,8 +26,7 @@
 		serial0 = &serial0;
 		serial1 = &serial1;
 		pci0 = &pci0;
-		/* pci1 doesn't have a corresponding physical connector */
-		pci2 = &pci2;
+		pci1 = &pci1;
 	};
 
 	cpus {
@@ -381,7 +380,7 @@
 		bus-range = <0 0>;
 		ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x10000000
 			  0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00800000>;
-		clock-frequency = <66666666>;
+		clock-frequency = <66000000>;
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
@@ -390,7 +389,7 @@
 		device_type = "pci";
 	};
 
-	pci2: pcie@e000a000 {
+	pci1: pcie@e000a000 {
 		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 
@@ -403,9 +402,9 @@
 		interrupt-parent = <&mpic>;
 		interrupts = <0x1a 0x2>;
 		bus-range = <0x0 0xff>;
-		ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
-			  0x01000000 0x0 0x00000000 0xe3000000 0x0 0x08000000>;
-		clock-frequency = <33333333>;
+		ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
+			  0x01000000 0x0 0x00000000 0xe2800000 0x0 0x08000000>;
+		clock-frequency = <33000000>;
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
@@ -419,11 +418,11 @@
 			device_type = "pci";
 			ranges = <0x02000000 0x0 0xa0000000
 				  0x02000000 0x0 0xa0000000
-				  0x0 0x20000000
+				  0x0 0x10000000
 
 				  0x01000000 0x0 0x00000000
 				  0x01000000 0x0 0x00000000
-				  0x0 0x08000000>;
+				  0x0 0x00800000>;
 		};
 	};
 };
diff --git a/arch/powerpc/boot/dts/tqm5200.dts b/arch/powerpc/boot/dts/tqm5200.dts
index c9590b58b7b..1db07f6cf13 100644
--- a/arch/powerpc/boot/dts/tqm5200.dts
+++ b/arch/powerpc/boot/dts/tqm5200.dts
@@ -160,7 +160,6 @@
 			compatible = "fsl,mpc5200-i2c","fsl-i2c";
 			reg = <0x3d40 0x40>;
 			interrupts = <2 16 0>;
-			fsl5200-clocking;
 
 			 rtc@68 {
 				compatible = "dallas,ds1307";
diff --git a/arch/powerpc/boot/dts/uc101.dts b/arch/powerpc/boot/dts/uc101.dts
new file mode 100644
index 00000000000..019264c6290
--- /dev/null
+++ b/arch/powerpc/boot/dts/uc101.dts
@@ -0,0 +1,284 @@
+/*
+ * Manroland uc101 board Device Tree Source
+ *
+ * Copyright (C) 2009 DENX Software Engineering GmbH
+ * Heiko Schocher <hs@denx.de>
+ * Copyright 2006-2007 Secret Lab Technologies Ltd.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "manroland,uc101";
+	compatible = "manroland,uc101";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&mpc5200_pic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,5200@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <0x4000>;	// L1, 16K
+			i-cache-size = <0x4000>;	// L1, 16K
+			timebase-frequency = <0>;	// from bootloader
+			bus-frequency = <0>;		// from bootloader
+			clock-frequency = <0>;		// from bootloader
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x04000000>;	// 64MB
+	};
+
+	soc5200@f0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc5200b-immr";
+		ranges = <0 0xf0000000 0x0000c000>;
+		reg = <0xf0000000 0x00000100>;
+		bus-frequency = <0>;		// from bootloader
+		system-frequency = <0>;		// from bootloader
+
+		cdm@200 {
+			compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
+			reg = <0x200 0x38>;
+		};
+
+		mpc5200_pic: interrupt-controller@500 {
+			// 5200 interrupts are encoded into two levels;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
+			reg = <0x500 0x80>;
+		};
+
+		gpt0: timer@600 {	// General Purpose Timer in GPIO mode
+			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			reg = <0x600 0x10>;
+			interrupts = <1 9 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpt1: timer@610 {	// General Purpose Timer in GPIO mode
+			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			reg = <0x610 0x10>;
+			interrupts = <1 10 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpt2: timer@620 {	// General Purpose Timer in GPIO mode
+			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			reg = <0x620 0x10>;
+			interrupts = <1 11 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpt3: timer@630 {	// General Purpose Timer in GPIO mode
+			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			reg = <0x630 0x10>;
+			interrupts = <1 12 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpt4: timer@640 {	// General Purpose Timer in GPIO mode
+			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			reg = <0x640 0x10>;
+			interrupts = <1 13 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpt5: timer@650 {	// General Purpose Timer in GPIO mode
+			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			reg = <0x650 0x10>;
+			interrupts = <1 14 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpt6: timer@660 {	// General Purpose Timer in GPIO mode
+			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			reg = <0x660 0x10>;
+			interrupts = <1 15 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpt7: timer@670 {	// General Purpose Timer in GPIO mode
+			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			reg = <0x670 0x10>;
+			interrupts = <1 16 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpio_simple: gpio@b00 {
+			compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
+			reg = <0xb00 0x40>;
+			interrupts = <1 7 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpio_wkup: gpio@c00 {
+			compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
+			reg = <0xc00 0x40>;
+			interrupts = <1 8 0 0 3 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		dma-controller@1200 {
+			compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
+			reg = <0x1200 0x80>;
+			interrupts = <3 0 0  3 1 0  3 2 0  3 3 0
+			              3 4 0  3 5 0  3 6 0  3 7 0
+			              3 8 0  3 9 0  3 10 0  3 11 0
+			              3 12 0  3 13 0  3 14 0  3 15 0>;
+		};
+
+		xlb@1f00 {
+			compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
+			reg = <0x1f00 0x100>;
+		};
+
+		serial@2000 { /* PSC1 in UART mode */
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+			reg = <0x2000 0x100>;
+			interrupts = <2 1 0>;
+		};
+
+		serial@2200 { /* PSC2 in UART mode */
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+			reg = <0x2200 0x100>;
+			interrupts = <2 2 0>;
+		};
+
+		serial@2c00 {		/* PSC6 in UART mode */
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+			reg = <0x2c00 0x100>;
+			interrupts = <2 4 0>;
+		};
+
+		ethernet@3000 {
+			compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
+			reg = <0x3000 0x400>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <2 5 0>;
+			phy-handle = <&phy0>;
+		};
+
+		mdio@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
+			reg = <0x3000 0x400>;	// fec range, since we need to setup fec interrupts
+			interrupts = <2 5 0>;	// these are for "mii command finished", not link changes & co.
+
+			phy0: ethernet-phy@0 {
+				compatible = "intel,lxt971";
+				reg = <0>;
+			};
+		};
+
+		ata@3a00 {
+			compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
+			reg = <0x3a00 0x100>;
+			interrupts = <2 7 0>;
+		};
+
+		i2c@3d40 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
+			reg = <0x3d40 0x40>;
+			interrupts = <2 16 0>;
+			fsl,preserve-clocking;
+			clock-frequency = <400000>;
+
+			hwmon@2c {
+				compatible = "ad,adm9240";
+				reg = <0x2c>;
+			};
+			rtc@51 {
+				compatible = "nxp,pcf8563";
+				reg = <0x51>;
+			};
+		};
+
+		sram@8000 {
+			compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
+			reg = <0x8000 0x4000>;
+		};
+	};
+
+	localbus {
+		compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus";
+
+		#address-cells = <2>;
+		#size-cells = <1>;
+
+		ranges = <0 0 0xff800000 0x00800000
+			  1 0 0x80000000 0x00800000
+			  3 0 0x80000000 0x00800000>;
+
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 0x00800000>;
+			bank-width = <2>;
+			device-width = <2>;
+			#size-cells = <1>;
+			#address-cells = <1>;
+
+			partition@0 {
+				label = "DTS";
+				reg = <0x0 0x00100000>;
+			};
+			partition@100000 {
+				label = "Kernel";
+				reg = <0x100000 0x00200000>;
+			};
+			partition@300000 {
+				label = "RootFS";
+				reg = <0x00300000 0x00200000>;
+			};
+			partition@500000 {
+				label = "user";
+				reg = <0x00500000 0x00200000>;
+			};
+			partition@700000 {
+				label = "U-Boot";
+				reg = <0x00700000 0x00040000>;
+			};
+			partition@740000 {
+				label = "Env";
+				reg = <0x00740000 0x00010000>;
+			};
+			partition@750000 {
+				label = "red. Env";
+				reg = <0x00750000 0x00010000>;
+			};
+			partition@760000 {
+				label = "reserve";
+				reg = <0x00760000 0x000a0000>;
+			};
+		};
+
+	};
+};
diff --git a/arch/powerpc/boot/install.sh b/arch/powerpc/boot/install.sh
index 98312d169c8..b6a256bc96e 100644
--- a/arch/powerpc/boot/install.sh
+++ b/arch/powerpc/boot/install.sh
@@ -23,8 +23,8 @@ set -e
 
 # User may have a custom install script
 
-if [ -x ~/bin/${CROSS_COMPILE}installkernel ]; then exec ~/bin/${CROSS_COMPILE}installkernel "$@"; fi
-if [ -x /sbin/${CROSS_COMPILE}installkernel ]; then exec /sbin/${CROSS_COMPILE}installkernel "$@"; fi
+if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi
+if [ -x /sbin/${INSTALLKERNEL} ]; then exec /sbin/${INSTALLKERNEL} "$@"; fi
 
 # Default install