powerpc: Move include files to arch/powerpc/include/asm

from include/asm-powerpc.  This is the result of a

mkdir arch/powerpc/include/asm
git mv include/asm-powerpc/* arch/powerpc/include/asm

Followed by a few documentation/comment fixups and a couple of places
where <asm-powepc/...> was being used explicitly.  Of the latter only
one was outside the arch code and it is a driver only built for powerpc.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

1 files changed, 121 insertions, 0 deletions

diff --git a/arch/powerpc/include/asm/tsi108.h b/arch/powerpc/include/asm/tsi108.h
new file mode 100644
index 00000000000..f8b60793b7a
--- /dev/null
+++ b/arch/powerpc/include/asm/tsi108.h
@@ -0,0 +1,121 @@
+/*
+ * common routine and memory layout for Tundra TSI108(Grendel) host bridge
+ * memory controller.
+ *
+ * Author: Jacob Pan (jacob.pan@freescale.com)
+ *	   Alex Bounine (alexandreb@tundra.com)
+ *
+ * Copyright 2004-2006 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef __PPC_KERNEL_TSI108_H
+#define __PPC_KERNEL_TSI108_H
+
+#include <asm/pci-bridge.h>
+
+/* Size of entire register space */
+#define TSI108_REG_SIZE		(0x10000)
+
+/* Sizes of register spaces for individual blocks */
+#define TSI108_HLP_SIZE		0x1000
+#define TSI108_PCI_SIZE		0x1000
+#define TSI108_CLK_SIZE		0x1000
+#define TSI108_PB_SIZE		0x1000
+#define TSI108_SD_SIZE		0x1000
+#define TSI108_DMA_SIZE		0x1000
+#define TSI108_ETH_SIZE		0x1000
+#define TSI108_I2C_SIZE		0x400
+#define TSI108_MPIC_SIZE	0x400
+#define TSI108_UART0_SIZE	0x200
+#define TSI108_GPIO_SIZE	0x200
+#define TSI108_UART1_SIZE	0x200
+
+/* Offsets within Tsi108(A) CSR space for individual blocks */
+#define TSI108_HLP_OFFSET	0x0000
+#define TSI108_PCI_OFFSET	0x1000
+#define TSI108_CLK_OFFSET	0x2000
+#define TSI108_PB_OFFSET	0x3000
+#define TSI108_SD_OFFSET	0x4000
+#define TSI108_DMA_OFFSET	0x5000
+#define TSI108_ETH_OFFSET	0x6000
+#define TSI108_I2C_OFFSET	0x7000
+#define TSI108_MPIC_OFFSET	0x7400
+#define TSI108_UART0_OFFSET	0x7800
+#define TSI108_GPIO_OFFSET	0x7A00
+#define TSI108_UART1_OFFSET	0x7C00
+
+/* Tsi108 registers used by common code components */
+#define TSI108_PCI_CSR		(0x004)
+#define TSI108_PCI_IRP_CFG_CTL	(0x180)
+#define TSI108_PCI_IRP_STAT	(0x184)
+#define TSI108_PCI_IRP_ENABLE	(0x188)
+#define TSI108_PCI_IRP_INTAD	(0x18C)
+
+#define TSI108_PCI_IRP_STAT_P_INT	(0x00400000)
+#define TSI108_PCI_IRP_ENABLE_P_INT	(0x00400000)
+
+#define TSI108_CG_PWRUP_STATUS	(0x234)
+
+#define TSI108_PB_ISR		(0x00C)
+#define TSI108_PB_ERRCS		(0x404)
+#define TSI108_PB_AERR		(0x408)
+
+#define TSI108_PB_ERRCS_ES		(1 << 1)
+#define TSI108_PB_ISR_PBS_RD_ERR	(1 << 8)
+
+#define TSI108_PCI_CFG_SIZE		(0x01000000)
+
+/*
+ * PHY Configuration Options
+ *
+ * Specify "bcm54xx" in the compatible property of your device tree phy
+ * nodes if your board uses the Broadcom PHYs
+ */
+#define TSI108_PHY_MV88E	0	/* Marvel 88Exxxx PHY */
+#define TSI108_PHY_BCM54XX	1	/* Broardcom BCM54xx PHY */
+
+/* Global variables */
+
+extern u32 tsi108_pci_cfg_base;
+/* Exported functions */
+
+extern int tsi108_bridge_init(struct pci_controller *hose, uint phys_csr_base);
+extern unsigned long tsi108_get_mem_size(void);
+extern unsigned long tsi108_get_cpu_clk(void);
+extern unsigned long tsi108_get_sdc_clk(void);
+extern int tsi108_direct_write_config(struct pci_bus *bus, unsigned int devfn,
+				      int offset, int len, u32 val);
+extern int tsi108_direct_read_config(struct pci_bus *bus, unsigned int devfn,
+				     int offset, int len, u32 * val);
+extern void tsi108_clear_pci_error(u32 pci_cfg_base);
+
+extern phys_addr_t get_csrbase(void);
+
+typedef struct {
+	u32 regs;		/* hw registers base address */
+	u32 phyregs;		/* phy registers base address */
+	u16 phy;		/* phy address */
+	u16 irq_num;		/* irq number */
+	u8 mac_addr[6];		/* phy mac address */
+	u16 phy_type;	/* type of phy on board */
+} hw_info;
+
+extern u32 get_vir_csrbase(void);
+extern u32 tsi108_csr_vir_base;
+
+static inline u32 tsi108_read_reg(u32 reg_offset)
+{
+	return in_be32((volatile u32 *)(tsi108_csr_vir_base + reg_offset));
+}
+
+static inline void tsi108_write_reg(u32 reg_offset, u32 val)
+{
+	out_be32((volatile u32 *)(tsi108_csr_vir_base + reg_offset), val);
+}
+
+#endif				/* __PPC_KERNEL_TSI108_H */