powerpc: Move VMX and VSX asm code to vector.S

Currently, load_up_altivec and give_up_altivec are duplicated
in 32-bit and 64-bit. This creates a common implementation that
is moved away from head_32.S, head_64.S and misc_64.S and into
vector.S, using the same macros we already use for our common
implementation of load_up_fpu.

I also moved the VSX code over to vector.S though in that case
I didn't make it build on 32-bit (yet).

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

1 files changed, 0 insertions, 95 deletions

diff --git a/arch/powerpc/kernel/head_32.S b/arch/powerpc/kernel/head_32.S
index c01467f952d..6437f905c56 100644
--- a/arch/powerpc/kernel/head_32.S
+++ b/arch/powerpc/kernel/head_32.S
@@ -743,101 +743,6 @@ PerformanceMonitor:
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	EXC_XFER_STD(0xf00, performance_monitor_exception)
 
-#ifdef CONFIG_ALTIVEC
-/* Note that the AltiVec support is closely modeled after the FP
- * support.  Changes to one are likely to be applicable to the
- * other!  */
-load_up_altivec:
-/*
- * Disable AltiVec for the task which had AltiVec previously,
- * and save its AltiVec registers in its thread_struct.
- * Enables AltiVec for use in the kernel on return.
- * On SMP we know the AltiVec units are free, since we give it up every
- * switch.  -- Kumar
- */
-	mfmsr	r5
-	oris	r5,r5,MSR_VEC@h
-	MTMSRD(r5)			/* enable use of AltiVec now */
-	isync
-/*
- * For SMP, we don't do lazy AltiVec switching because it just gets too
- * horrendously complex, especially when a task switches from one CPU
- * to another.  Instead we call giveup_altivec in switch_to.
- */
-#ifndef CONFIG_SMP
-	tophys(r6,0)
-	addis	r3,r6,last_task_used_altivec@ha
-	lwz	r4,last_task_used_altivec@l(r3)
-	cmpwi	0,r4,0
-	beq	1f
-	add	r4,r4,r6
-	addi	r4,r4,THREAD	/* want THREAD of last_task_used_altivec */
-	SAVE_32VRS(0,r10,r4)
-	mfvscr	vr0
-	li	r10,THREAD_VSCR
-	stvx	vr0,r10,r4
-	lwz	r5,PT_REGS(r4)
-	add	r5,r5,r6
-	lwz	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
-	lis	r10,MSR_VEC@h
-	andc	r4,r4,r10	/* disable altivec for previous task */
-	stw	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
-1:
-#endif /* CONFIG_SMP */
-	/* enable use of AltiVec after return */
-	oris	r9,r9,MSR_VEC@h
-	mfspr	r5,SPRN_SPRG3		/* current task's THREAD (phys) */
-	li	r4,1
-	li	r10,THREAD_VSCR
-	stw	r4,THREAD_USED_VR(r5)
-	lvx	vr0,r10,r5
-	mtvscr	vr0
-	REST_32VRS(0,r10,r5)
-#ifndef CONFIG_SMP
-	subi	r4,r5,THREAD
-	sub	r4,r4,r6
-	stw	r4,last_task_used_altivec@l(r3)
-#endif /* CONFIG_SMP */
-	/* restore registers and return */
-	/* we haven't used ctr or xer or lr */
-	b	fast_exception_return
-
-/*
- * giveup_altivec(tsk)
- * Disable AltiVec for the task given as the argument,
- * and save the AltiVec registers in its thread_struct.
- * Enables AltiVec for use in the kernel on return.
- */
-
-	.globl	giveup_altivec
-giveup_altivec:
-	mfmsr	r5
-	oris	r5,r5,MSR_VEC@h
-	SYNC
-	MTMSRD(r5)			/* enable use of AltiVec now */
-	isync
-	cmpwi	0,r3,0
-	beqlr-				/* if no previous owner, done */
-	addi	r3,r3,THREAD		/* want THREAD of task */
-	lwz	r5,PT_REGS(r3)
-	cmpwi	0,r5,0
-	SAVE_32VRS(0, r4, r3)
-	mfvscr	vr0
-	li	r4,THREAD_VSCR
-	stvx	vr0,r4,r3
-	beq	1f
-	lwz	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
-	lis	r3,MSR_VEC@h
-	andc	r4,r4,r3		/* disable AltiVec for previous task */
-	stw	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
-1:
-#ifndef CONFIG_SMP
-	li	r5,0
-	lis	r4,last_task_used_altivec@ha
-	stw	r5,last_task_used_altivec@l(r4)
-#endif /* CONFIG_SMP */
-	blr
-#endif /* CONFIG_ALTIVEC */
 
 /*
  * This code is jumped to from the startup code to copy