manual update from upstream:

Applied Al's change 06a544971fad0992fe8b92c5647538d573089dd4
to new location of swiotlb.c

Signed-off-by: Tony Luck <tony.luck@intel.com>

1 files changed, 860 insertions, 0 deletions

diff --git a/arch/powerpc/kernel/head_8xx.S b/arch/powerpc/kernel/head_8xx.S
new file mode 100644
index 00000000000..bc6d1ac5523
--- /dev/null
+++ b/arch/powerpc/kernel/head_8xx.S
@@ -0,0 +1,860 @@
+/*
+ *  arch/ppc/kernel/except_8xx.S
+ *
+ *  PowerPC version
+ *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *  Rewritten by Cort Dougan (cort@cs.nmt.edu) for PReP
+ *    Copyright (C) 1996 Cort Dougan <cort@cs.nmt.edu>
+ *  Low-level exception handlers and MMU support
+ *  rewritten by Paul Mackerras.
+ *    Copyright (C) 1996 Paul Mackerras.
+ *  MPC8xx modifications by Dan Malek
+ *    Copyright (C) 1997 Dan Malek (dmalek@jlc.net).
+ *
+ *  This file contains low-level support and setup for PowerPC 8xx
+ *  embedded processors, including trap and interrupt dispatch.
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/config.h>
+#include <asm/processor.h>
+#include <asm/page.h>
+#include <asm/mmu.h>
+#include <asm/cache.h>
+#include <asm/pgtable.h>
+#include <asm/cputable.h>
+#include <asm/thread_info.h>
+#include <asm/ppc_asm.h>
+#include <asm/asm-offsets.h>
+
+/* Macro to make the code more readable. */
+#ifdef CONFIG_8xx_CPU6
+#define DO_8xx_CPU6(val, reg)	\
+	li	reg, val;	\
+	stw	reg, 12(r0);	\
+	lwz	reg, 12(r0);
+#else
+#define DO_8xx_CPU6(val, reg)
+#endif
+	.text
+	.globl	_stext
+_stext:
+	.text
+	.globl	_start
+_start:
+
+/* MPC8xx
+ * This port was done on an MBX board with an 860.  Right now I only
+ * support an ELF compressed (zImage) boot from EPPC-Bug because the
+ * code there loads up some registers before calling us:
+ *   r3: ptr to board info data
+ *   r4: initrd_start or if no initrd then 0
+ *   r5: initrd_end - unused if r4 is 0
+ *   r6: Start of command line string
+ *   r7: End of command line string
+ *
+ * I decided to use conditional compilation instead of checking PVR and
+ * adding more processor specific branches around code I don't need.
+ * Since this is an embedded processor, I also appreciate any memory
+ * savings I can get.
+ *
+ * The MPC8xx does not have any BATs, but it supports large page sizes.
+ * We first initialize the MMU to support 8M byte pages, then load one
+ * entry into each of the instruction and data TLBs to map the first
+ * 8M 1:1.  I also mapped an additional I/O space 1:1 so we can get to
+ * the "internal" processor registers before MMU_init is called.
+ *
+ * The TLB code currently contains a major hack.  Since I use the condition
+ * code register, I have to save and restore it.  I am out of registers, so
+ * I just store it in memory location 0 (the TLB handlers are not reentrant).
+ * To avoid making any decisions, I need to use the "segment" valid bit
+ * in the first level table, but that would require many changes to the
+ * Linux page directory/table functions that I don't want to do right now.
+ *
+ * I used to use SPRG2 for a temporary register in the TLB handler, but it
+ * has since been put to other uses.  I now use a hack to save a register
+ * and the CCR at memory location 0.....Someday I'll fix this.....
+ *	-- Dan
+ */
+	.globl	__start
+__start:
+	mr	r31,r3			/* save parameters */
+	mr	r30,r4
+	mr	r29,r5
+	mr	r28,r6
+	mr	r27,r7
+
+	/* We have to turn on the MMU right away so we get cache modes
+	 * set correctly.
+	 */
+	bl	initial_mmu
+
+/* We now have the lower 8 Meg mapped into TLB entries, and the caches
+ * ready to work.
+ */
+
+turn_on_mmu:
+	mfmsr	r0
+	ori	r0,r0,MSR_DR|MSR_IR
+	mtspr	SPRN_SRR1,r0
+	lis	r0,start_here@h
+	ori	r0,r0,start_here@l
+	mtspr	SPRN_SRR0,r0
+	SYNC
+	rfi				/* enables MMU */
+
+/*
+ * Exception entry code.  This code runs with address translation
+ * turned off, i.e. using physical addresses.
+ * We assume sprg3 has the physical address of the current
+ * task's thread_struct.
+ */
+#define EXCEPTION_PROLOG	\
+	mtspr	SPRN_SPRG0,r10;	\
+	mtspr	SPRN_SPRG1,r11;	\
+	mfcr	r10;		\
+	EXCEPTION_PROLOG_1;	\
+	EXCEPTION_PROLOG_2
+
+#define EXCEPTION_PROLOG_1	\
+	mfspr	r11,SPRN_SRR1;		/* check whether user or kernel */ \
+	andi.	r11,r11,MSR_PR;	\
+	tophys(r11,r1);			/* use tophys(r1) if kernel */ \
+	beq	1f;		\
+	mfspr	r11,SPRN_SPRG3;	\
+	lwz	r11,THREAD_INFO-THREAD(r11);	\
+	addi	r11,r11,THREAD_SIZE;	\
+	tophys(r11,r11);	\
+1:	subi	r11,r11,INT_FRAME_SIZE	/* alloc exc. frame */
+
+
+#define EXCEPTION_PROLOG_2	\
+	CLR_TOP32(r11);		\
+	stw	r10,_CCR(r11);		/* save registers */ \
+	stw	r12,GPR12(r11);	\
+	stw	r9,GPR9(r11);	\
+	mfspr	r10,SPRN_SPRG0;	\
+	stw	r10,GPR10(r11);	\
+	mfspr	r12,SPRN_SPRG1;	\
+	stw	r12,GPR11(r11);	\
+	mflr	r10;		\
+	stw	r10,_LINK(r11);	\
+	mfspr	r12,SPRN_SRR0;	\
+	mfspr	r9,SPRN_SRR1;	\
+	stw	r1,GPR1(r11);	\
+	stw	r1,0(r11);	\
+	tovirt(r1,r11);			/* set new kernel sp */	\
+	li	r10,MSR_KERNEL & ~(MSR_IR|MSR_DR); /* can take exceptions */ \
+	MTMSRD(r10);			/* (except for mach check in rtas) */ \
+	stw	r0,GPR0(r11);	\
+	SAVE_4GPRS(3, r11);	\
+	SAVE_2GPRS(7, r11)
+
+/*
+ * Note: code which follows this uses cr0.eq (set if from kernel),
+ * r11, r12 (SRR0), and r9 (SRR1).
+ *
+ * Note2: once we have set r1 we are in a position to take exceptions
+ * again, and we could thus set MSR:RI at that point.
+ */
+
+/*
+ * Exception vectors.
+ */
+#define EXCEPTION(n, label, hdlr, xfer)		\
+	. = n;					\
+label:						\
+	EXCEPTION_PROLOG;			\
+	addi	r3,r1,STACK_FRAME_OVERHEAD;	\
+	xfer(n, hdlr)
+
+#define EXC_XFER_TEMPLATE(n, hdlr, trap, copyee, tfer, ret)	\
+	li	r10,trap;					\
+	stw	r10,_TRAP(r11);					\
+	li	r10,MSR_KERNEL;					\
+	copyee(r10, r9);					\
+	bl	tfer;						\
+i##n:								\
+	.long	hdlr;						\
+	.long	ret
+
+#define COPY_EE(d, s)		rlwimi d,s,0,16,16
+#define NOCOPY(d, s)
+
+#define EXC_XFER_STD(n, hdlr)		\
+	EXC_XFER_TEMPLATE(n, hdlr, n, NOCOPY, transfer_to_handler_full,	\
+			  ret_from_except_full)
+
+#define EXC_XFER_LITE(n, hdlr)		\
+	EXC_XFER_TEMPLATE(n, hdlr, n+1, NOCOPY, transfer_to_handler, \
+			  ret_from_except)
+
+#define EXC_XFER_EE(n, hdlr)		\
+	EXC_XFER_TEMPLATE(n, hdlr, n, COPY_EE, transfer_to_handler_full, \
+			  ret_from_except_full)
+
+#define EXC_XFER_EE_LITE(n, hdlr)	\
+	EXC_XFER_TEMPLATE(n, hdlr, n+1, COPY_EE, transfer_to_handler, \
+			  ret_from_except)
+
+/* System reset */
+	EXCEPTION(0x100, Reset, unknown_exception, EXC_XFER_STD)
+
+/* Machine check */
+	. = 0x200
+MachineCheck:
+	EXCEPTION_PROLOG
+	mfspr r4,SPRN_DAR
+	stw r4,_DAR(r11)
+	mfspr r5,SPRN_DSISR
+	stw r5,_DSISR(r11)
+	addi r3,r1,STACK_FRAME_OVERHEAD
+	EXC_XFER_STD(0x200, machine_check_exception)
+
+/* Data access exception.
+ * This is "never generated" by the MPC8xx.  We jump to it for other
+ * translation errors.
+ */
+	. = 0x300
+DataAccess:
+	EXCEPTION_PROLOG
+	mfspr	r10,SPRN_DSISR
+	stw	r10,_DSISR(r11)
+	mr	r5,r10
+	mfspr	r4,SPRN_DAR
+	EXC_XFER_EE_LITE(0x300, handle_page_fault)
+
+/* Instruction access exception.
+ * This is "never generated" by the MPC8xx.  We jump to it for other
+ * translation errors.
+ */
+	. = 0x400
+InstructionAccess:
+	EXCEPTION_PROLOG
+	mr	r4,r12
+	mr	r5,r9
+	EXC_XFER_EE_LITE(0x400, handle_page_fault)
+
+/* External interrupt */
+	EXCEPTION(0x500, HardwareInterrupt, do_IRQ, EXC_XFER_LITE)
+
+/* Alignment exception */
+	. = 0x600
+Alignment:
+	EXCEPTION_PROLOG
+	mfspr	r4,SPRN_DAR
+	stw	r4,_DAR(r11)
+	mfspr	r5,SPRN_DSISR
+	stw	r5,_DSISR(r11)
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	EXC_XFER_EE(0x600, alignment_exception)
+
+/* Program check exception */
+	EXCEPTION(0x700, ProgramCheck, program_check_exception, EXC_XFER_STD)
+
+/* No FPU on MPC8xx.  This exception is not supposed to happen.
+*/
+	EXCEPTION(0x800, FPUnavailable, unknown_exception, EXC_XFER_STD)
+
+/* Decrementer */
+	EXCEPTION(0x900, Decrementer, timer_interrupt, EXC_XFER_LITE)
+
+	EXCEPTION(0xa00, Trap_0a, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0xb00, Trap_0b, unknown_exception, EXC_XFER_EE)
+
+/* System call */
+	. = 0xc00
+SystemCall:
+	EXCEPTION_PROLOG
+	EXC_XFER_EE_LITE(0xc00, DoSyscall)
+
+/* Single step - not used on 601 */
+	EXCEPTION(0xd00, SingleStep, single_step_exception, EXC_XFER_STD)
+	EXCEPTION(0xe00, Trap_0e, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0xf00, Trap_0f, unknown_exception, EXC_XFER_EE)
+
+/* On the MPC8xx, this is a software emulation interrupt.  It occurs
+ * for all unimplemented and illegal instructions.
+ */
+	EXCEPTION(0x1000, SoftEmu, SoftwareEmulation, EXC_XFER_STD)
+
+	. = 0x1100
+/*
+ * For the MPC8xx, this is a software tablewalk to load the instruction
+ * TLB.  It is modelled after the example in the Motorola manual.  The task
+ * switch loads the M_TWB register with the pointer to the first level table.
+ * If we discover there is no second level table (value is zero) or if there
+ * is an invalid pte, we load that into the TLB, which causes another fault
+ * into the TLB Error interrupt where we can handle such problems.
+ * We have to use the MD_xxx registers for the tablewalk because the
+ * equivalent MI_xxx registers only perform the attribute functions.
+ */
+InstructionTLBMiss:
+#ifdef CONFIG_8xx_CPU6
+	stw	r3, 8(r0)
+#endif
+	DO_8xx_CPU6(0x3f80, r3)
+	mtspr	SPRN_M_TW, r10	/* Save a couple of working registers */
+	mfcr	r10
+	stw	r10, 0(r0)
+	stw	r11, 4(r0)
+	mfspr	r10, SPRN_SRR0	/* Get effective address of fault */
+	DO_8xx_CPU6(0x3780, r3)
+	mtspr	SPRN_MD_EPN, r10	/* Have to use MD_EPN for walk, MI_EPN can't */
+	mfspr	r10, SPRN_M_TWB	/* Get level 1 table entry address */
+
+	/* If we are faulting a kernel address, we have to use the
+	 * kernel page tables.
+	 */
+	andi.	r11, r10, 0x0800	/* Address >= 0x80000000 */
+	beq	3f
+	lis	r11, swapper_pg_dir@h
+	ori	r11, r11, swapper_pg_dir@l
+	rlwimi	r10, r11, 0, 2, 19
+3:
+	lwz	r11, 0(r10)	/* Get the level 1 entry */
+	rlwinm.	r10, r11,0,0,19	/* Extract page descriptor page address */
+	beq	2f		/* If zero, don't try to find a pte */
+
+	/* We have a pte table, so load the MI_TWC with the attributes
+	 * for this "segment."
+	 */
+	ori	r11,r11,1		/* Set valid bit */
+	DO_8xx_CPU6(0x2b80, r3)
+	mtspr	SPRN_MI_TWC, r11	/* Set segment attributes */
+	DO_8xx_CPU6(0x3b80, r3)
+	mtspr	SPRN_MD_TWC, r11	/* Load pte table base address */
+	mfspr	r11, SPRN_MD_TWC	/* ....and get the pte address */
+	lwz	r10, 0(r11)	/* Get the pte */
+
+	ori	r10, r10, _PAGE_ACCESSED
+	stw	r10, 0(r11)
+
+	/* The Linux PTE won't go exactly into the MMU TLB.
+	 * Software indicator bits 21, 22 and 28 must be clear.
+	 * Software indicator bits 24, 25, 26, and 27 must be
+	 * set.  All other Linux PTE bits control the behavior
+	 * of the MMU.
+	 */
+2:	li	r11, 0x00f0
+	rlwimi	r10, r11, 0, 24, 28	/* Set 24-27, clear 28 */
+	DO_8xx_CPU6(0x2d80, r3)
+	mtspr	SPRN_MI_RPN, r10	/* Update TLB entry */
+
+	mfspr	r10, SPRN_M_TW	/* Restore registers */
+	lwz	r11, 0(r0)
+	mtcr	r11
+	lwz	r11, 4(r0)
+#ifdef CONFIG_8xx_CPU6
+	lwz	r3, 8(r0)
+#endif
+	rfi
+
+	. = 0x1200
+DataStoreTLBMiss:
+#ifdef CONFIG_8xx_CPU6
+	stw	r3, 8(r0)
+#endif
+	DO_8xx_CPU6(0x3f80, r3)
+	mtspr	SPRN_M_TW, r10	/* Save a couple of working registers */
+	mfcr	r10
+	stw	r10, 0(r0)
+	stw	r11, 4(r0)
+	mfspr	r10, SPRN_M_TWB	/* Get level 1 table entry address */
+
+	/* If we are faulting a kernel address, we have to use the
+	 * kernel page tables.
+	 */
+	andi.	r11, r10, 0x0800
+	beq	3f
+	lis	r11, swapper_pg_dir@h
+	ori	r11, r11, swapper_pg_dir@l
+	rlwimi	r10, r11, 0, 2, 19
+3:
+	lwz	r11, 0(r10)	/* Get the level 1 entry */
+	rlwinm.	r10, r11,0,0,19	/* Extract page descriptor page address */
+	beq	2f		/* If zero, don't try to find a pte */
+
+	/* We have a pte table, so load fetch the pte from the table.
+	 */
+	ori	r11, r11, 1	/* Set valid bit in physical L2 page */
+	DO_8xx_CPU6(0x3b80, r3)
+	mtspr	SPRN_MD_TWC, r11	/* Load pte table base address */
+	mfspr	r10, SPRN_MD_TWC	/* ....and get the pte address */
+	lwz	r10, 0(r10)	/* Get the pte */
+
+	/* Insert the Guarded flag into the TWC from the Linux PTE.
+	 * It is bit 27 of both the Linux PTE and the TWC (at least
+	 * I got that right :-).  It will be better when we can put
+	 * this into the Linux pgd/pmd and load it in the operation
+	 * above.
+	 */
+	rlwimi	r11, r10, 0, 27, 27
+	DO_8xx_CPU6(0x3b80, r3)
+	mtspr	SPRN_MD_TWC, r11
+
+	mfspr	r11, SPRN_MD_TWC	/* get the pte address again */
+	ori	r10, r10, _PAGE_ACCESSED
+	stw	r10, 0(r11)
+
+	/* The Linux PTE won't go exactly into the MMU TLB.
+	 * Software indicator bits 21, 22 and 28 must be clear.
+	 * Software indicator bits 24, 25, 26, and 27 must be
+	 * set.  All other Linux PTE bits control the behavior
+	 * of the MMU.
+	 */
+2:	li	r11, 0x00f0
+	rlwimi	r10, r11, 0, 24, 28	/* Set 24-27, clear 28 */
+	DO_8xx_CPU6(0x3d80, r3)
+	mtspr	SPRN_MD_RPN, r10	/* Update TLB entry */
+
+	mfspr	r10, SPRN_M_TW	/* Restore registers */
+	lwz	r11, 0(r0)
+	mtcr	r11
+	lwz	r11, 4(r0)
+#ifdef CONFIG_8xx_CPU6
+	lwz	r3, 8(r0)
+#endif
+	rfi
+
+/* This is an instruction TLB error on the MPC8xx.  This could be due
+ * to many reasons, such as executing guarded memory or illegal instruction
+ * addresses.  There is nothing to do but handle a big time error fault.
+ */
+	. = 0x1300
+InstructionTLBError:
+	b	InstructionAccess
+
+/* This is the data TLB error on the MPC8xx.  This could be due to
+ * many reasons, including a dirty update to a pte.  We can catch that
+ * one here, but anything else is an error.  First, we track down the
+ * Linux pte.  If it is valid, write access is allowed, but the
+ * page dirty bit is not set, we will set it and reload the TLB.  For
+ * any other case, we bail out to a higher level function that can
+ * handle it.
+ */
+	. = 0x1400
+DataTLBError:
+#ifdef CONFIG_8xx_CPU6
+	stw	r3, 8(r0)
+#endif
+	DO_8xx_CPU6(0x3f80, r3)
+	mtspr	SPRN_M_TW, r10	/* Save a couple of working registers */
+	mfcr	r10
+	stw	r10, 0(r0)
+	stw	r11, 4(r0)
+
+	/* First, make sure this was a store operation.
+	*/
+	mfspr	r10, SPRN_DSISR
+	andis.	r11, r10, 0x0200	/* If set, indicates store op */
+	beq	2f
+
+	/* The EA of a data TLB miss is automatically stored in the MD_EPN
+	 * register.  The EA of a data TLB error is automatically stored in
+	 * the DAR, but not the MD_EPN register.  We must copy the 20 most
+	 * significant bits of the EA from the DAR to MD_EPN before we
+	 * start walking the page tables.  We also need to copy the CASID
+	 * value from the M_CASID register.
+	 * Addendum:  The EA of a data TLB error is _supposed_ to be stored
+	 * in DAR, but it seems that this doesn't happen in some cases, such
+	 * as when the error is due to a dcbi instruction to a page with a
+	 * TLB that doesn't have the changed bit set.  In such cases, there
+	 * does not appear to be any way  to recover the EA of the error
+	 * since it is neither in DAR nor MD_EPN.  As a workaround, the
+	 * _PAGE_HWWRITE bit is set for all kernel data pages when the PTEs
+	 * are initialized in mapin_ram().  This will avoid the problem,
+	 * assuming we only use the dcbi instruction on kernel addresses.
+	 */
+	mfspr	r10, SPRN_DAR
+	rlwinm	r11, r10, 0, 0, 19
+	ori	r11, r11, MD_EVALID
+	mfspr	r10, SPRN_M_CASID
+	rlwimi	r11, r10, 0, 28, 31
+	DO_8xx_CPU6(0x3780, r3)
+	mtspr	SPRN_MD_EPN, r11
+
+	mfspr	r10, SPRN_M_TWB	/* Get level 1 table entry address */
+
+	/* If we are faulting a kernel address, we have to use the
+	 * kernel page tables.
+	 */
+	andi.	r11, r10, 0x0800
+	beq	3f
+	lis	r11, swapper_pg_dir@h
+	ori	r11, r11, swapper_pg_dir@l
+	rlwimi	r10, r11, 0, 2, 19
+3:
+	lwz	r11, 0(r10)	/* Get the level 1 entry */
+	rlwinm.	r10, r11,0,0,19	/* Extract page descriptor page address */
+	beq	2f		/* If zero, bail */
+
+	/* We have a pte table, so fetch the pte from the table.
+	 */
+	ori	r11, r11, 1		/* Set valid bit in physical L2 page */
+	DO_8xx_CPU6(0x3b80, r3)
+	mtspr	SPRN_MD_TWC, r11		/* Load pte table base address */
+	mfspr	r11, SPRN_MD_TWC		/* ....and get the pte address */
+	lwz	r10, 0(r11)		/* Get the pte */
+
+	andi.	r11, r10, _PAGE_RW	/* Is it writeable? */
+	beq	2f			/* Bail out if not */
+
+	/* Update 'changed', among others.
+	*/
+	ori	r10, r10, _PAGE_DIRTY|_PAGE_ACCESSED|_PAGE_HWWRITE
+	mfspr	r11, SPRN_MD_TWC		/* Get pte address again */
+	stw	r10, 0(r11)		/* and update pte in table */
+
+	/* The Linux PTE won't go exactly into the MMU TLB.
+	 * Software indicator bits 21, 22 and 28 must be clear.
+	 * Software indicator bits 24, 25, 26, and 27 must be
+	 * set.  All other Linux PTE bits control the behavior
+	 * of the MMU.
+	 */
+	li	r11, 0x00f0
+	rlwimi	r10, r11, 0, 24, 28	/* Set 24-27, clear 28 */
+	DO_8xx_CPU6(0x3d80, r3)
+	mtspr	SPRN_MD_RPN, r10	/* Update TLB entry */
+
+	mfspr	r10, SPRN_M_TW	/* Restore registers */
+	lwz	r11, 0(r0)
+	mtcr	r11
+	lwz	r11, 4(r0)
+#ifdef CONFIG_8xx_CPU6
+	lwz	r3, 8(r0)
+#endif
+	rfi
+2:
+	mfspr	r10, SPRN_M_TW	/* Restore registers */
+	lwz	r11, 0(r0)
+	mtcr	r11
+	lwz	r11, 4(r0)
+#ifdef CONFIG_8xx_CPU6
+	lwz	r3, 8(r0)
+#endif
+	b	DataAccess
+
+	EXCEPTION(0x1500, Trap_15, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x1600, Trap_16, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x1700, Trap_17, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x1800, Trap_18, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x1900, Trap_19, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x1a00, Trap_1a, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x1b00, Trap_1b, unknown_exception, EXC_XFER_EE)
+
+/* On the MPC8xx, these next four traps are used for development
+ * support of breakpoints and such.  Someday I will get around to
+ * using them.
+ */
+	EXCEPTION(0x1c00, Trap_1c, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x1d00, Trap_1d, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x1e00, Trap_1e, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x1f00, Trap_1f, unknown_exception, EXC_XFER_EE)
+
+	. = 0x2000
+
+	.globl	giveup_fpu
+giveup_fpu:
+	blr
+
+/*
+ * This is where the main kernel code starts.
+ */
+start_here:
+	/* ptr to current */
+	lis	r2,init_task@h
+	ori	r2,r2,init_task@l
+
+	/* ptr to phys current thread */
+	tophys(r4,r2)
+	addi	r4,r4,THREAD	/* init task's THREAD */
+	mtspr	SPRN_SPRG3,r4
+	li	r3,0
+	mtspr	SPRN_SPRG2,r3	/* 0 => r1 has kernel sp */
+
+	/* stack */
+	lis	r1,init_thread_union@ha
+	addi	r1,r1,init_thread_union@l
+	li	r0,0
+	stwu	r0,THREAD_SIZE-STACK_FRAME_OVERHEAD(r1)
+
+	bl	early_init	/* We have to do this with MMU on */
+
+/*
+ * Decide what sort of machine this is and initialize the MMU.
+ */
+	mr	r3,r31
+	mr	r4,r30
+	mr	r5,r29
+	mr	r6,r28
+	mr	r7,r27
+	bl	machine_init
+	bl	MMU_init
+
+/*
+ * Go back to running unmapped so we can load up new values
+ * and change to using our exception vectors.
+ * On the 8xx, all we have to do is invalidate the TLB to clear
+ * the old 8M byte TLB mappings and load the page table base register.
+ */
+	/* The right way to do this would be to track it down through
+	 * init's THREAD like the context switch code does, but this is
+	 * easier......until someone changes init's static structures.
+	 */
+	lis	r6, swapper_pg_dir@h
+	ori	r6, r6, swapper_pg_dir@l
+	tophys(r6,r6)
+#ifdef CONFIG_8xx_CPU6
+	lis	r4, cpu6_errata_word@h
+	ori	r4, r4, cpu6_errata_word@l
+	li	r3, 0x3980
+	stw	r3, 12(r4)
+	lwz	r3, 12(r4)
+#endif
+	mtspr	SPRN_M_TWB, r6
+	lis	r4,2f@h
+	ori	r4,r4,2f@l
+	tophys(r4,r4)
+	li	r3,MSR_KERNEL & ~(MSR_IR|MSR_DR)
+	mtspr	SPRN_SRR0,r4
+	mtspr	SPRN_SRR1,r3
+	rfi
+/* Load up the kernel context */
+2:
+	SYNC			/* Force all PTE updates to finish */
+	tlbia			/* Clear all TLB entries */
+	sync			/* wait for tlbia/tlbie to finish */
+	TLBSYNC			/* ... on all CPUs */
+
+	/* set up the PTE pointers for the Abatron bdiGDB.
+	*/
+	tovirt(r6,r6)
+	lis	r5, abatron_pteptrs@h
+	ori	r5, r5, abatron_pteptrs@l
+	stw	r5, 0xf0(r0)	/* Must match your Abatron config file */
+	tophys(r5,r5)
+	stw	r6, 0(r5)
+
+/* Now turn on the MMU for real! */
+	li	r4,MSR_KERNEL
+	lis	r3,start_kernel@h
+	ori	r3,r3,start_kernel@l
+	mtspr	SPRN_SRR0,r3
+	mtspr	SPRN_SRR1,r4
+	rfi			/* enable MMU and jump to start_kernel */
+
+/* Set up the initial MMU state so we can do the first level of
+ * kernel initialization.  This maps the first 8 MBytes of memory 1:1
+ * virtual to physical.  Also, set the cache mode since that is defined
+ * by TLB entries and perform any additional mapping (like of the IMMR).
+ * If configured to pin some TLBs, we pin the first 8 Mbytes of kernel,
+ * 24 Mbytes of data, and the 8M IMMR space.  Anything not covered by
+ * these mappings is mapped by page tables.
+ */
+initial_mmu:
+	tlbia			/* Invalidate all TLB entries */
+#ifdef CONFIG_PIN_TLB
+	lis	r8, MI_RSV4I@h
+	ori	r8, r8, 0x1c00
+#else
+	li	r8, 0
+#endif
+	mtspr	SPRN_MI_CTR, r8	/* Set instruction MMU control */
+
+#ifdef CONFIG_PIN_TLB
+	lis	r10, (MD_RSV4I | MD_RESETVAL)@h
+	ori	r10, r10, 0x1c00
+	mr	r8, r10
+#else
+	lis	r10, MD_RESETVAL@h
+#endif
+#ifndef CONFIG_8xx_COPYBACK
+	oris	r10, r10, MD_WTDEF@h
+#endif
+	mtspr	SPRN_MD_CTR, r10	/* Set data TLB control */
+
+	/* Now map the lower 8 Meg into the TLBs.  For this quick hack,
+	 * we can load the instruction and data TLB registers with the
+	 * same values.
+	 */
+	lis	r8, KERNELBASE@h	/* Create vaddr for TLB */
+	ori	r8, r8, MI_EVALID	/* Mark it valid */
+	mtspr	SPRN_MI_EPN, r8
+	mtspr	SPRN_MD_EPN, r8
+	li	r8, MI_PS8MEG		/* Set 8M byte page */
+	ori	r8, r8, MI_SVALID	/* Make it valid */
+	mtspr	SPRN_MI_TWC, r8
+	mtspr	SPRN_MD_TWC, r8
+	li	r8, MI_BOOTINIT		/* Create RPN for address 0 */
+	mtspr	SPRN_MI_RPN, r8		/* Store TLB entry */
+	mtspr	SPRN_MD_RPN, r8
+	lis	r8, MI_Kp@h		/* Set the protection mode */
+	mtspr	SPRN_MI_AP, r8
+	mtspr	SPRN_MD_AP, r8
+
+	/* Map another 8 MByte at the IMMR to get the processor
+	 * internal registers (among other things).
+	 */
+#ifdef CONFIG_PIN_TLB
+	addi	r10, r10, 0x0100
+	mtspr	SPRN_MD_CTR, r10
+#endif
+	mfspr	r9, 638			/* Get current IMMR */
+	andis.	r9, r9, 0xff80		/* Get 8Mbyte boundary */
+
+	mr	r8, r9			/* Create vaddr for TLB */
+	ori	r8, r8, MD_EVALID	/* Mark it valid */
+	mtspr	SPRN_MD_EPN, r8
+	li	r8, MD_PS8MEG		/* Set 8M byte page */
+	ori	r8, r8, MD_SVALID	/* Make it valid */
+	mtspr	SPRN_MD_TWC, r8
+	mr	r8, r9			/* Create paddr for TLB */
+	ori	r8, r8, MI_BOOTINIT|0x2 /* Inhibit cache -- Cort */
+	mtspr	SPRN_MD_RPN, r8
+
+#ifdef CONFIG_PIN_TLB
+	/* Map two more 8M kernel data pages.
+	*/
+	addi	r10, r10, 0x0100
+	mtspr	SPRN_MD_CTR, r10
+
+	lis	r8, KERNELBASE@h	/* Create vaddr for TLB */
+	addis	r8, r8, 0x0080		/* Add 8M */
+	ori	r8, r8, MI_EVALID	/* Mark it valid */
+	mtspr	SPRN_MD_EPN, r8
+	li	r9, MI_PS8MEG		/* Set 8M byte page */
+	ori	r9, r9, MI_SVALID	/* Make it valid */
+	mtspr	SPRN_MD_TWC, r9
+	li	r11, MI_BOOTINIT	/* Create RPN for address 0 */
+	addis	r11, r11, 0x0080	/* Add 8M */
+	mtspr	SPRN_MD_RPN, r8
+
+	addis	r8, r8, 0x0080		/* Add 8M */
+	mtspr	SPRN_MD_EPN, r8
+	mtspr	SPRN_MD_TWC, r9
+	addis	r11, r11, 0x0080	/* Add 8M */
+	mtspr	SPRN_MD_RPN, r8
+#endif
+
+	/* Since the cache is enabled according to the information we
+	 * just loaded into the TLB, invalidate and enable the caches here.
+	 * We should probably check/set other modes....later.
+	 */
+	lis	r8, IDC_INVALL@h
+	mtspr	SPRN_IC_CST, r8
+	mtspr	SPRN_DC_CST, r8
+	lis	r8, IDC_ENABLE@h
+	mtspr	SPRN_IC_CST, r8
+#ifdef CONFIG_8xx_COPYBACK
+	mtspr	SPRN_DC_CST, r8
+#else
+	/* For a debug option, I left this here to easily enable
+	 * the write through cache mode
+	 */
+	lis	r8, DC_SFWT@h
+	mtspr	SPRN_DC_CST, r8
+	lis	r8, IDC_ENABLE@h
+	mtspr	SPRN_DC_CST, r8
+#endif
+	blr
+
+
+/*
+ * Set up to use a given MMU context.
+ * r3 is context number, r4 is PGD pointer.
+ *
+ * We place the physical address of the new task page directory loaded
+ * into the MMU base register, and set the ASID compare register with
+ * the new "context."
+ */
+_GLOBAL(set_context)
+
+#ifdef CONFIG_BDI_SWITCH
+	/* Context switch the PTE pointer for the Abatron BDI2000.
+	 * The PGDIR is passed as second argument.
+	 */
+	lis	r5, KERNELBASE@h
+	lwz	r5, 0xf0(r5)
+	stw	r4, 0x4(r5)
+#endif
+
+#ifdef CONFIG_8xx_CPU6
+	lis	r6, cpu6_errata_word@h
+	ori	r6, r6, cpu6_errata_word@l
+	tophys	(r4, r4)
+	li	r7, 0x3980
+	stw	r7, 12(r6)
+	lwz	r7, 12(r6)
+        mtspr   SPRN_M_TWB, r4               /* Update MMU base address */
+	li	r7, 0x3380
+	stw	r7, 12(r6)
+	lwz	r7, 12(r6)
+        mtspr   SPRN_M_CASID, r3             /* Update context */
+#else
+        mtspr   SPRN_M_CASID,r3		/* Update context */
+	tophys	(r4, r4)
+	mtspr	SPRN_M_TWB, r4		/* and pgd */
+#endif
+	SYNC
+	blr
+
+#ifdef CONFIG_8xx_CPU6
+/* It's here because it is unique to the 8xx.
+ * It is important we get called with interrupts disabled.  I used to
+ * do that, but it appears that all code that calls this already had
+ * interrupt disabled.
+ */
+	.globl	set_dec_cpu6
+set_dec_cpu6:
+	lis	r7, cpu6_errata_word@h
+	ori	r7, r7, cpu6_errata_word@l
+	li	r4, 0x2c00
+	stw	r4, 8(r7)
+	lwz	r4, 8(r7)
+        mtspr   22, r3		/* Update Decrementer */
+	SYNC
+	blr
+#endif
+
+/*
+ * We put a few things here that have to be page-aligned.
+ * This stuff goes at the beginning of the data segment,
+ * which is page-aligned.
+ */
+	.data
+	.globl	sdata
+sdata:
+	.globl	empty_zero_page
+empty_zero_page:
+	.space	4096
+
+	.globl	swapper_pg_dir
+swapper_pg_dir:
+	.space	4096
+
+/*
+ * This space gets a copy of optional info passed to us by the bootstrap
+ * Used to pass parameters into the kernel like root=/dev/sda1, etc.
+ */
+	.globl	cmd_line
+cmd_line:
+	.space	512
+
+/* Room for two PTE table poiners, usually the kernel and current user
+ * pointer to their respective root page table (pgdir).
+ */
+abatron_pteptrs:
+	.space	8
+
+#ifdef CONFIG_8xx_CPU6
+	.globl	cpu6_errata_word
+cpu6_errata_word:
+	.space	16
+#endif
+