powernv/cpuidle: Redesign idle states management

Deep idle states like sleep and winkle are per core idle states. A core
enters these states only when all the threads enter either the
particular idle state or a deeper one. There are tasks like fastsleep
hardware bug workaround and hypervisor core state save which have to be
done only by the last thread of the core entering deep idle state and
similarly tasks like timebase resync, hypervisor core register restore
that have to be done only by the first thread waking up from these
state.

The current idle state management does not have a way to distinguish the
first/last thread of the core waking/entering idle states. Tasks like
timebase resync are done for all the threads. This is not only is
suboptimal, but can cause functionality issues when subcores and kvm is
involved.

This patch adds the necessary infrastructure to track idle states of
threads in a per-core structure. It uses this info to perform tasks like
fastsleep workaround and timebase resync only once per core.

Signed-off-by: Shreyas B. Prabhu <shreyas@linux.vnet.ibm.com>
Originally-by: Preeti U. Murthy <preeti@linux.vnet.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: linux-pm@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

1 files changed, 153 insertions, 44 deletions

diff --git a/arch/powerpc/kernel/idle_power7.S b/arch/powerpc/kernel/idle_power7.S
index e5aba6abbe6..0f2c113c8ca 100644
--- a/arch/powerpc/kernel/idle_power7.S
+++ b/arch/powerpc/kernel/idle_power7.S
@@ -18,6 +18,7 @@
 #include <asm/hw_irq.h>
 #include <asm/kvm_book3s_asm.h>
 #include <asm/opal.h>
+#include <asm/cpuidle.h>
 
 #undef DEBUG
 
@@ -37,8 +38,7 @@
 
 /*
  * Pass requested state in r3:
- * 	0 - nap
- * 	1 - sleep
+ *	r3 - PNV_THREAD_NAP/SLEEP/WINKLE
  *
  * To check IRQ_HAPPENED in r4
  * 	0 - don't check
@@ -123,12 +123,58 @@ power7_enter_nap_mode:
 	li	r4,KVM_HWTHREAD_IN_NAP
 	stb	r4,HSTATE_HWTHREAD_STATE(r13)
 #endif
-	cmpwi	cr0,r3,1
-	beq	2f
+	stb	r3,PACA_THREAD_IDLE_STATE(r13)
+	cmpwi	cr1,r3,PNV_THREAD_SLEEP
+	bge	cr1,2f
 	IDLE_STATE_ENTER_SEQ(PPC_NAP)
 	/* No return */
-2:	IDLE_STATE_ENTER_SEQ(PPC_SLEEP)
-	/* No return */
+2:
+	/* Sleep or winkle */
+	lbz	r7,PACA_THREAD_MASK(r13)
+	ld	r14,PACA_CORE_IDLE_STATE_PTR(r13)
+lwarx_loop1:
+	lwarx	r15,0,r14
+	andc	r15,r15,r7			/* Clear thread bit */
+
+	andi.	r15,r15,PNV_CORE_IDLE_THREAD_BITS
+
+/*
+ * If cr0 = 0, then current thread is the last thread of the core entering
+ * sleep. Last thread needs to execute the hardware bug workaround code if
+ * required by the platform.
+ * Make the workaround call unconditionally here. The below branch call is
+ * patched out when the idle states are discovered if the platform does not
+ * require it.
+ */
+.global pnv_fastsleep_workaround_at_entry
+pnv_fastsleep_workaround_at_entry:
+	beq	fastsleep_workaround_at_entry
+
+	stwcx.	r15,0,r14
+	bne-	lwarx_loop1
+	isync
+
+common_enter: /* common code for all the threads entering sleep */
+	IDLE_STATE_ENTER_SEQ(PPC_SLEEP)
+
+fastsleep_workaround_at_entry:
+	ori	r15,r15,PNV_CORE_IDLE_LOCK_BIT
+	stwcx.	r15,0,r14
+	bne-	lwarx_loop1
+	isync
+
+	/* Fast sleep workaround */
+	li	r3,1
+	li	r4,1
+	li	r0,OPAL_CONFIG_CPU_IDLE_STATE
+	bl	opal_call_realmode
+
+	/* Clear Lock bit */
+	li	r0,0
+	lwsync
+	stw	r0,0(r14)
+	b	common_enter
+
 
 _GLOBAL(power7_idle)
 	/* Now check if user or arch enabled NAP mode */
@@ -141,49 +187,16 @@ _GLOBAL(power7_idle)
 
 _GLOBAL(power7_nap)
 	mr	r4,r3
-	li	r3,0
+	li	r3,PNV_THREAD_NAP
 	b	power7_powersave_common
 	/* No return */
 
 _GLOBAL(power7_sleep)
-	li	r3,1
+	li	r3,PNV_THREAD_SLEEP
 	li	r4,1
 	b	power7_powersave_common
 	/* No return */
 
-/*
- * Make opal call in realmode. This is a generic function to be called
- * from realmode from reset vector. It handles endianess.
- *
- * r13 - paca pointer
- * r1  - stack pointer
- * r3  - opal token
- */
-opal_call_realmode:
-	mflr	r12
-	std	r12,_LINK(r1)
-	ld	r2,PACATOC(r13)
-	/* Set opal return address */
-	LOAD_REG_ADDR(r0,return_from_opal_call)
-	mtlr	r0
-	/* Handle endian-ness */
-	li	r0,MSR_LE
-	mfmsr	r12
-	andc	r12,r12,r0
-	mtspr	SPRN_HSRR1,r12
-	mr	r0,r3			/* Move opal token to r0 */
-	LOAD_REG_ADDR(r11,opal)
-	ld	r12,8(r11)
-	ld	r2,0(r11)
-	mtspr	SPRN_HSRR0,r12
-	hrfid
-
-return_from_opal_call:
-	FIXUP_ENDIAN
-	ld	r0,_LINK(r1)
-	mtlr	r0
-	blr
-
 #define CHECK_HMI_INTERRUPT						\
 	mfspr	r0,SPRN_SRR1;						\
 BEGIN_FTR_SECTION_NESTED(66);						\
@@ -197,7 +210,7 @@ ALT_FTR_SECTION_END_NESTED_IFSET(CPU_FTR_ARCH_207S, 66);		\
 	ld	r2,PACATOC(r13);					\
 	ld	r1,PACAR1(r13);						\
 	std	r3,ORIG_GPR3(r1);	/* Save original r3 */		\
-	li	r3,OPAL_HANDLE_HMI;	/* Pass opal token argument*/	\
+	li	r0,OPAL_HANDLE_HMI;	/* Pass opal token argument*/	\
 	bl	opal_call_realmode;					\
 	ld	r3,ORIG_GPR3(r1);	/* Restore original r3 */	\
 20:	nop;
@@ -206,16 +219,105 @@ ALT_FTR_SECTION_END_NESTED_IFSET(CPU_FTR_ARCH_207S, 66);		\
 _GLOBAL(power7_wakeup_tb_loss)
 	ld	r2,PACATOC(r13);
 	ld	r1,PACAR1(r13)
+	/*
+	 * Before entering any idle state, the NVGPRs are saved in the stack
+	 * and they are restored before switching to the process context. Hence
+	 * until they are restored, they are free to be used.
+	 *
+	 * Save SRR1 in a NVGPR as it might be clobbered in opal_call_realmode
+	 * (called in CHECK_HMI_INTERRUPT). SRR1 is required to determine the
+	 * wakeup reason if we branch to kvm_start_guest.
+	 */
 
+	mfspr	r16,SPRN_SRR1
 BEGIN_FTR_SECTION
 	CHECK_HMI_INTERRUPT
 END_FTR_SECTION_IFSET(CPU_FTR_HVMODE)
+
+	lbz	r7,PACA_THREAD_MASK(r13)
+	ld	r14,PACA_CORE_IDLE_STATE_PTR(r13)
+lwarx_loop2:
+	lwarx	r15,0,r14
+	andi.	r9,r15,PNV_CORE_IDLE_LOCK_BIT
+	/*
+	 * Lock bit is set in one of the 2 cases-
+	 * a. In the sleep/winkle enter path, the last thread is executing
+	 * fastsleep workaround code.
+	 * b. In the wake up path, another thread is executing fastsleep
+	 * workaround undo code or resyncing timebase or restoring context
+	 * In either case loop until the lock bit is cleared.
+	 */
+	bne	core_idle_lock_held
+
+	cmpwi	cr2,r15,0
+	or	r15,r15,r7		/* Set thread bit */
+
+	beq	cr2,first_thread
+
+	/* Not first thread in core to wake up */
+	stwcx.	r15,0,r14
+	bne-	lwarx_loop2
+	isync
+	b	common_exit
+
+core_idle_lock_held:
+	HMT_LOW
+core_idle_lock_loop:
+	lwz	r15,0(14)
+	andi.   r9,r15,PNV_CORE_IDLE_LOCK_BIT
+	bne	core_idle_lock_loop
+	HMT_MEDIUM
+	b	lwarx_loop2
+
+first_thread:
+	/* First thread in core to wakeup */
+	ori	r15,r15,PNV_CORE_IDLE_LOCK_BIT
+	stwcx.	r15,0,r14
+	bne-	lwarx_loop2
+	isync
+
+	/*
+	 * First thread in the core waking up from fastsleep. It needs to
+	 * call the fastsleep workaround code if the platform requires it.
+	 * Call it unconditionally here. The below branch instruction will
+	 * be patched out when the idle states are discovered if platform
+	 * does not require workaround.
+	 */
+.global pnv_fastsleep_workaround_at_exit
+pnv_fastsleep_workaround_at_exit:
+	b	fastsleep_workaround_at_exit
+
+timebase_resync:
+	/* Do timebase resync if we are waking up from sleep. Use cr3 value
+	 * set in exceptions-64s.S */
+	ble	cr3,clear_lock
 	/* Time base re-sync */
-	li	r3,OPAL_RESYNC_TIMEBASE
+	li	r0,OPAL_RESYNC_TIMEBASE
 	bl	opal_call_realmode;
-
 	/* TODO: Check r3 for failure */
 
+clear_lock:
+	andi.	r15,r15,PNV_CORE_IDLE_THREAD_BITS
+	lwsync
+	stw	r15,0(r14)
+
+common_exit:
+	li	r5,PNV_THREAD_RUNNING
+	stb     r5,PACA_THREAD_IDLE_STATE(r13)
+
+	mtspr	SPRN_SRR1,r16
+#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
+	li      r0,KVM_HWTHREAD_IN_KERNEL
+	stb     r0,HSTATE_HWTHREAD_STATE(r13)
+	/* Order setting hwthread_state vs. testing hwthread_req */
+	sync
+	lbz     r0,HSTATE_HWTHREAD_REQ(r13)
+	cmpwi   r0,0
+	beq     6f
+	b       kvm_start_guest
+6:
+#endif
+
 	REST_NVGPRS(r1)
 	REST_GPR(2, r1)
 	ld	r3,_CCR(r1)
@@ -228,6 +330,13 @@ END_FTR_SECTION_IFSET(CPU_FTR_HVMODE)
 	mtspr	SPRN_SRR0,r5
 	rfid
 
+fastsleep_workaround_at_exit:
+	li	r3,1
+	li	r4,0
+	li	r0,OPAL_CONFIG_CPU_IDLE_STATE
+	bl	opal_call_realmode
+	b	timebase_resync
+
 /*
  * R3 here contains the value that will be returned to the caller
  * of power7_nap.