[PATCH] powerpc: Move more ppc64 files with no ppc32 equivalent to powerpc

This patch moves a bunch more files from arch/ppc64 and
include/asm-ppc64 which have no equivalents in ppc32 code into
arch/powerpc and include/asm-powerpc.  The file affected are:
	hvcall.h
	proc_ppc64.c
	sysfs.c
	lparcfg.c
	rtas_pci.c

The only changes apart from the move and corresponding Makefile
changes are:
	- #ifndef/#define in includes updated to _ASM_POWERPC_ form
	- trailing whitespace removed
	- comments giving full paths removed

Built and booted on POWER5 LPAR (ARCH=powerpc and ARCH=ppc64), built
for 32-bit powermac (ARCH=powerpc).

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

1 files changed, 612 insertions, 0 deletions

diff --git a/arch/powerpc/kernel/lparcfg.c b/arch/powerpc/kernel/lparcfg.c
new file mode 100644
index 00000000000..5e954fae031
--- /dev/null
+++ b/arch/powerpc/kernel/lparcfg.c
@@ -0,0 +1,612 @@
+/*
+ * PowerPC64 LPAR Configuration Information Driver
+ *
+ * Dave Engebretsen engebret@us.ibm.com
+ *    Copyright (c) 2003 Dave Engebretsen
+ * Will Schmidt willschm@us.ibm.com
+ *    SPLPAR updates, Copyright (c) 2003 Will Schmidt IBM Corporation.
+ *    seq_file updates, Copyright (c) 2004 Will Schmidt IBM Corporation.
+ * Nathan Lynch nathanl@austin.ibm.com
+ *    Added lparcfg_write, Copyright (C) 2004 Nathan Lynch IBM Corporation.
+ *
+ *      This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License
+ *      as published by the Free Software Foundation; either version
+ *      2 of the License, or (at your option) any later version.
+ *
+ * This driver creates a proc file at /proc/ppc64/lparcfg which contains
+ * keyword - value pairs that specify the configuration of the partition.
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/proc_fs.h>
+#include <linux/init.h>
+#include <linux/seq_file.h>
+#include <asm/uaccess.h>
+#include <asm/iseries/hv_lp_config.h>
+#include <asm/lppaca.h>
+#include <asm/hvcall.h>
+#include <asm/firmware.h>
+#include <asm/rtas.h>
+#include <asm/system.h>
+#include <asm/time.h>
+#include <asm/iseries/it_exp_vpd_panel.h>
+#include <asm/prom.h>
+#include <asm/systemcfg.h>
+
+#define MODULE_VERS "1.6"
+#define MODULE_NAME "lparcfg"
+
+/* #define LPARCFG_DEBUG */
+
+/* find a better place for this function... */
+void log_plpar_hcall_return(unsigned long rc, char *tag)
+{
+	if (rc == 0)		/* success, return */
+		return;
+/* check for null tag ? */
+	if (rc == H_Hardware)
+		printk(KERN_INFO
+		       "plpar-hcall (%s) failed with hardware fault\n", tag);
+	else if (rc == H_Function)
+		printk(KERN_INFO
+		       "plpar-hcall (%s) failed; function not allowed\n", tag);
+	else if (rc == H_Authority)
+		printk(KERN_INFO
+		       "plpar-hcall (%s) failed; not authorized to this function\n",
+		       tag);
+	else if (rc == H_Parameter)
+		printk(KERN_INFO "plpar-hcall (%s) failed; Bad parameter(s)\n",
+		       tag);
+	else
+		printk(KERN_INFO
+		       "plpar-hcall (%s) failed with unexpected rc(0x%lx)\n",
+		       tag, rc);
+
+}
+
+static struct proc_dir_entry *proc_ppc64_lparcfg;
+#define LPARCFG_BUFF_SIZE 4096
+
+#ifdef CONFIG_PPC_ISERIES
+
+/*
+ * For iSeries legacy systems, the PPA purr function is available from the
+ * emulated_time_base field in the paca.
+ */
+static unsigned long get_purr(void)
+{
+	unsigned long sum_purr = 0;
+	int cpu;
+	struct paca_struct *lpaca;
+
+	for_each_cpu(cpu) {
+		lpaca = paca + cpu;
+		sum_purr += lpaca->lppaca.emulated_time_base;
+
+#ifdef PURR_DEBUG
+		printk(KERN_INFO "get_purr for cpu (%d) has value (%ld) \n",
+			cpu, lpaca->lppaca.emulated_time_base);
+#endif
+	}
+	return sum_purr;
+}
+
+#define lparcfg_write NULL
+
+/*
+ * Methods used to fetch LPAR data when running on an iSeries platform.
+ */
+static int lparcfg_data(struct seq_file *m, void *v)
+{
+	unsigned long pool_id, lp_index;
+	int shared, entitled_capacity, max_entitled_capacity;
+	int processors, max_processors;
+	struct paca_struct *lpaca = get_paca();
+	unsigned long purr = get_purr();
+
+	seq_printf(m, "%s %s \n", MODULE_NAME, MODULE_VERS);
+
+	shared = (int)(lpaca->lppaca_ptr->shared_proc);
+	seq_printf(m, "serial_number=%c%c%c%c%c%c%c\n",
+		   e2a(xItExtVpdPanel.mfgID[2]),
+		   e2a(xItExtVpdPanel.mfgID[3]),
+		   e2a(xItExtVpdPanel.systemSerial[1]),
+		   e2a(xItExtVpdPanel.systemSerial[2]),
+		   e2a(xItExtVpdPanel.systemSerial[3]),
+		   e2a(xItExtVpdPanel.systemSerial[4]),
+		   e2a(xItExtVpdPanel.systemSerial[5]));
+
+	seq_printf(m, "system_type=%c%c%c%c\n",
+		   e2a(xItExtVpdPanel.machineType[0]),
+		   e2a(xItExtVpdPanel.machineType[1]),
+		   e2a(xItExtVpdPanel.machineType[2]),
+		   e2a(xItExtVpdPanel.machineType[3]));
+
+	lp_index = HvLpConfig_getLpIndex();
+	seq_printf(m, "partition_id=%d\n", (int)lp_index);
+
+	seq_printf(m, "system_active_processors=%d\n",
+		   (int)HvLpConfig_getSystemPhysicalProcessors());
+
+	seq_printf(m, "system_potential_processors=%d\n",
+		   (int)HvLpConfig_getSystemPhysicalProcessors());
+
+	processors = (int)HvLpConfig_getPhysicalProcessors();
+	seq_printf(m, "partition_active_processors=%d\n", processors);
+
+	max_processors = (int)HvLpConfig_getMaxPhysicalProcessors();
+	seq_printf(m, "partition_potential_processors=%d\n", max_processors);
+
+	if (shared) {
+		entitled_capacity = HvLpConfig_getSharedProcUnits();
+		max_entitled_capacity = HvLpConfig_getMaxSharedProcUnits();
+	} else {
+		entitled_capacity = processors * 100;
+		max_entitled_capacity = max_processors * 100;
+	}
+	seq_printf(m, "partition_entitled_capacity=%d\n", entitled_capacity);
+
+	seq_printf(m, "partition_max_entitled_capacity=%d\n",
+		   max_entitled_capacity);
+
+	if (shared) {
+		pool_id = HvLpConfig_getSharedPoolIndex();
+		seq_printf(m, "pool=%d\n", (int)pool_id);
+		seq_printf(m, "pool_capacity=%d\n",
+			   (int)(HvLpConfig_getNumProcsInSharedPool(pool_id) *
+				 100));
+		seq_printf(m, "purr=%ld\n", purr);
+	}
+
+	seq_printf(m, "shared_processor_mode=%d\n", shared);
+
+	return 0;
+}
+#endif				/* CONFIG_PPC_ISERIES */
+
+#ifdef CONFIG_PPC_PSERIES
+/*
+ * Methods used to fetch LPAR data when running on a pSeries platform.
+ */
+
+/*
+ * H_GET_PPP hcall returns info in 4 parms.
+ *  entitled_capacity,unallocated_capacity,
+ *  aggregation, resource_capability).
+ *
+ *  R4 = Entitled Processor Capacity Percentage.
+ *  R5 = Unallocated Processor Capacity Percentage.
+ *  R6 (AABBCCDDEEFFGGHH).
+ *      XXXX - reserved (0)
+ *          XXXX - reserved (0)
+ *              XXXX - Group Number
+ *                  XXXX - Pool Number.
+ *  R7 (IIJJKKLLMMNNOOPP).
+ *      XX - reserved. (0)
+ *        XX - bit 0-6 reserved (0).   bit 7 is Capped indicator.
+ *          XX - variable processor Capacity Weight
+ *            XX - Unallocated Variable Processor Capacity Weight.
+ *              XXXX - Active processors in Physical Processor Pool.
+ *                  XXXX  - Processors active on platform.
+ */
+static unsigned int h_get_ppp(unsigned long *entitled,
+			      unsigned long *unallocated,
+			      unsigned long *aggregation,
+			      unsigned long *resource)
+{
+	unsigned long rc;
+	rc = plpar_hcall_4out(H_GET_PPP, 0, 0, 0, 0, entitled, unallocated,
+			      aggregation, resource);
+
+	log_plpar_hcall_return(rc, "H_GET_PPP");
+
+	return rc;
+}
+
+static void h_pic(unsigned long *pool_idle_time, unsigned long *num_procs)
+{
+	unsigned long rc;
+	unsigned long dummy;
+	rc = plpar_hcall(H_PIC, 0, 0, 0, 0, pool_idle_time, num_procs, &dummy);
+
+	log_plpar_hcall_return(rc, "H_PIC");
+}
+
+static unsigned long get_purr(void);
+
+/* Track sum of all purrs across all processors. This is used to further */
+/* calculate usage values by different applications                       */
+
+static unsigned long get_purr(void)
+{
+	unsigned long sum_purr = 0;
+	int cpu;
+	struct cpu_usage *cu;
+
+	for_each_cpu(cpu) {
+		cu = &per_cpu(cpu_usage_array, cpu);
+		sum_purr += cu->current_tb;
+	}
+	return sum_purr;
+}
+
+#define SPLPAR_CHARACTERISTICS_TOKEN 20
+#define SPLPAR_MAXLENGTH 1026*(sizeof(char))
+
+/*
+ * parse_system_parameter_string()
+ * Retrieve the potential_processors, max_entitled_capacity and friends
+ * through the get-system-parameter rtas call.  Replace keyword strings as
+ * necessary.
+ */
+static void parse_system_parameter_string(struct seq_file *m)
+{
+	int call_status;
+
+	char *local_buffer = kmalloc(SPLPAR_MAXLENGTH, GFP_KERNEL);
+	if (!local_buffer) {
+		printk(KERN_ERR "%s %s kmalloc failure at line %d \n",
+		       __FILE__, __FUNCTION__, __LINE__);
+		return;
+	}
+
+	spin_lock(&rtas_data_buf_lock);
+	memset(rtas_data_buf, 0, SPLPAR_MAXLENGTH);
+	call_status = rtas_call(rtas_token("ibm,get-system-parameter"), 3, 1,
+				NULL,
+				SPLPAR_CHARACTERISTICS_TOKEN,
+				__pa(rtas_data_buf));
+	memcpy(local_buffer, rtas_data_buf, SPLPAR_MAXLENGTH);
+	spin_unlock(&rtas_data_buf_lock);
+
+	if (call_status != 0) {
+		printk(KERN_INFO
+		       "%s %s Error calling get-system-parameter (0x%x)\n",
+		       __FILE__, __FUNCTION__, call_status);
+	} else {
+		int splpar_strlen;
+		int idx, w_idx;
+		char *workbuffer = kmalloc(SPLPAR_MAXLENGTH, GFP_KERNEL);
+		if (!workbuffer) {
+			printk(KERN_ERR "%s %s kmalloc failure at line %d \n",
+			       __FILE__, __FUNCTION__, __LINE__);
+			kfree(local_buffer);
+			return;
+		}
+#ifdef LPARCFG_DEBUG
+		printk(KERN_INFO "success calling get-system-parameter \n");
+#endif
+		splpar_strlen = local_buffer[0] * 16 + local_buffer[1];
+		local_buffer += 2;	/* step over strlen value */
+
+		memset(workbuffer, 0, SPLPAR_MAXLENGTH);
+		w_idx = 0;
+		idx = 0;
+		while ((*local_buffer) && (idx < splpar_strlen)) {
+			workbuffer[w_idx++] = local_buffer[idx++];
+			if ((local_buffer[idx] == ',')
+			    || (local_buffer[idx] == '\0')) {
+				workbuffer[w_idx] = '\0';
+				if (w_idx) {
+					/* avoid the empty string */
+					seq_printf(m, "%s\n", workbuffer);
+				}
+				memset(workbuffer, 0, SPLPAR_MAXLENGTH);
+				idx++;	/* skip the comma */
+				w_idx = 0;
+			} else if (local_buffer[idx] == '=') {
+				/* code here to replace workbuffer contents
+				   with different keyword strings */
+				if (0 == strcmp(workbuffer, "MaxEntCap")) {
+					strcpy(workbuffer,
+					       "partition_max_entitled_capacity");
+					w_idx = strlen(workbuffer);
+				}
+				if (0 == strcmp(workbuffer, "MaxPlatProcs")) {
+					strcpy(workbuffer,
+					       "system_potential_processors");
+					w_idx = strlen(workbuffer);
+				}
+			}
+		}
+		kfree(workbuffer);
+		local_buffer -= 2;	/* back up over strlen value */
+	}
+	kfree(local_buffer);
+}
+
+static int lparcfg_count_active_processors(void);
+
+/* Return the number of processors in the system.
+ * This function reads through the device tree and counts
+ * the virtual processors, this does not include threads.
+ */
+static int lparcfg_count_active_processors(void)
+{
+	struct device_node *cpus_dn = NULL;
+	int count = 0;
+
+	while ((cpus_dn = of_find_node_by_type(cpus_dn, "cpu"))) {
+#ifdef LPARCFG_DEBUG
+		printk(KERN_ERR "cpus_dn %p \n", cpus_dn);
+#endif
+		count++;
+	}
+	return count;
+}
+
+static int lparcfg_data(struct seq_file *m, void *v)
+{
+	int partition_potential_processors;
+	int partition_active_processors;
+	struct device_node *rootdn;
+	const char *model = "";
+	const char *system_id = "";
+	unsigned int *lp_index_ptr, lp_index = 0;
+	struct device_node *rtas_node;
+	int *lrdrp;
+
+	rootdn = find_path_device("/");
+	if (rootdn) {
+		model = get_property(rootdn, "model", NULL);
+		system_id = get_property(rootdn, "system-id", NULL);
+		lp_index_ptr = (unsigned int *)
+		    get_property(rootdn, "ibm,partition-no", NULL);
+		if (lp_index_ptr)
+			lp_index = *lp_index_ptr;
+	}
+
+	seq_printf(m, "%s %s \n", MODULE_NAME, MODULE_VERS);
+
+	seq_printf(m, "serial_number=%s\n", system_id);
+
+	seq_printf(m, "system_type=%s\n", model);
+
+	seq_printf(m, "partition_id=%d\n", (int)lp_index);
+
+	rtas_node = find_path_device("/rtas");
+	lrdrp = (int *)get_property(rtas_node, "ibm,lrdr-capacity", NULL);
+
+	if (lrdrp == NULL) {
+		partition_potential_processors = _systemcfg->processorCount;
+	} else {
+		partition_potential_processors = *(lrdrp + 4);
+	}
+
+	partition_active_processors = lparcfg_count_active_processors();
+
+	if (firmware_has_feature(FW_FEATURE_SPLPAR)) {
+		unsigned long h_entitled, h_unallocated;
+		unsigned long h_aggregation, h_resource;
+		unsigned long pool_idle_time, pool_procs;
+		unsigned long purr;
+
+		h_get_ppp(&h_entitled, &h_unallocated, &h_aggregation,
+			  &h_resource);
+
+		seq_printf(m, "R4=0x%lx\n", h_entitled);
+		seq_printf(m, "R5=0x%lx\n", h_unallocated);
+		seq_printf(m, "R6=0x%lx\n", h_aggregation);
+		seq_printf(m, "R7=0x%lx\n", h_resource);
+
+		purr = get_purr();
+
+		/* this call handles the ibm,get-system-parameter contents */
+		parse_system_parameter_string(m);
+
+		seq_printf(m, "partition_entitled_capacity=%ld\n", h_entitled);
+
+		seq_printf(m, "group=%ld\n", (h_aggregation >> 2 * 8) & 0xffff);
+
+		seq_printf(m, "system_active_processors=%ld\n",
+			   (h_resource >> 0 * 8) & 0xffff);
+
+		/* pool related entries are apropriate for shared configs */
+		if (paca[0].lppaca.shared_proc) {
+
+			h_pic(&pool_idle_time, &pool_procs);
+
+			seq_printf(m, "pool=%ld\n",
+				   (h_aggregation >> 0 * 8) & 0xffff);
+
+			/* report pool_capacity in percentage */
+			seq_printf(m, "pool_capacity=%ld\n",
+				   ((h_resource >> 2 * 8) & 0xffff) * 100);
+
+			seq_printf(m, "pool_idle_time=%ld\n", pool_idle_time);
+
+			seq_printf(m, "pool_num_procs=%ld\n", pool_procs);
+		}
+
+		seq_printf(m, "unallocated_capacity_weight=%ld\n",
+			   (h_resource >> 4 * 8) & 0xFF);
+
+		seq_printf(m, "capacity_weight=%ld\n",
+			   (h_resource >> 5 * 8) & 0xFF);
+
+		seq_printf(m, "capped=%ld\n", (h_resource >> 6 * 8) & 0x01);
+
+		seq_printf(m, "unallocated_capacity=%ld\n", h_unallocated);
+
+		seq_printf(m, "purr=%ld\n", purr);
+
+	} else {		/* non SPLPAR case */
+
+		seq_printf(m, "system_active_processors=%d\n",
+			   partition_potential_processors);
+
+		seq_printf(m, "system_potential_processors=%d\n",
+			   partition_potential_processors);
+
+		seq_printf(m, "partition_max_entitled_capacity=%d\n",
+			   partition_potential_processors * 100);
+
+		seq_printf(m, "partition_entitled_capacity=%d\n",
+			   partition_active_processors * 100);
+	}
+
+	seq_printf(m, "partition_active_processors=%d\n",
+		   partition_active_processors);
+
+	seq_printf(m, "partition_potential_processors=%d\n",
+		   partition_potential_processors);
+
+	seq_printf(m, "shared_processor_mode=%d\n", paca[0].lppaca.shared_proc);
+
+	return 0;
+}
+
+/*
+ * Interface for changing system parameters (variable capacity weight
+ * and entitled capacity).  Format of input is "param_name=value";
+ * anything after value is ignored.  Valid parameters at this time are
+ * "partition_entitled_capacity" and "capacity_weight".  We use
+ * H_SET_PPP to alter parameters.
+ *
+ * This function should be invoked only on systems with
+ * FW_FEATURE_SPLPAR.
+ */
+static ssize_t lparcfg_write(struct file *file, const char __user * buf,
+			     size_t count, loff_t * off)
+{
+	char *kbuf;
+	char *tmp;
+	u64 new_entitled, *new_entitled_ptr = &new_entitled;
+	u8 new_weight, *new_weight_ptr = &new_weight;
+
+	unsigned long current_entitled;	/* parameters for h_get_ppp */
+	unsigned long dummy;
+	unsigned long resource;
+	u8 current_weight;
+
+	ssize_t retval = -ENOMEM;
+
+	kbuf = kmalloc(count, GFP_KERNEL);
+	if (!kbuf)
+		goto out;
+
+	retval = -EFAULT;
+	if (copy_from_user(kbuf, buf, count))
+		goto out;
+
+	retval = -EINVAL;
+	kbuf[count - 1] = '\0';
+	tmp = strchr(kbuf, '=');
+	if (!tmp)
+		goto out;
+
+	*tmp++ = '\0';
+
+	if (!strcmp(kbuf, "partition_entitled_capacity")) {
+		char *endp;
+		*new_entitled_ptr = (u64) simple_strtoul(tmp, &endp, 10);
+		if (endp == tmp)
+			goto out;
+		new_weight_ptr = &current_weight;
+	} else if (!strcmp(kbuf, "capacity_weight")) {
+		char *endp;
+		*new_weight_ptr = (u8) simple_strtoul(tmp, &endp, 10);
+		if (endp == tmp)
+			goto out;
+		new_entitled_ptr = &current_entitled;
+	} else
+		goto out;
+
+	/* Get our current parameters */
+	retval = h_get_ppp(&current_entitled, &dummy, &dummy, &resource);
+	if (retval) {
+		retval = -EIO;
+		goto out;
+	}
+
+	current_weight = (resource >> 5 * 8) & 0xFF;
+
+	pr_debug("%s: current_entitled = %lu, current_weight = %lu\n",
+		 __FUNCTION__, current_entitled, current_weight);
+
+	pr_debug("%s: new_entitled = %lu, new_weight = %lu\n",
+		 __FUNCTION__, *new_entitled_ptr, *new_weight_ptr);
+
+	retval = plpar_hcall_norets(H_SET_PPP, *new_entitled_ptr,
+				    *new_weight_ptr);
+
+	if (retval == H_Success || retval == H_Constrained) {
+		retval = count;
+	} else if (retval == H_Busy) {
+		retval = -EBUSY;
+	} else if (retval == H_Hardware) {
+		retval = -EIO;
+	} else if (retval == H_Parameter) {
+		retval = -EINVAL;
+	} else {
+		printk(KERN_WARNING "%s: received unknown hv return code %ld",
+		       __FUNCTION__, retval);
+		retval = -EIO;
+	}
+
+      out:
+	kfree(kbuf);
+	return retval;
+}
+
+#endif				/* CONFIG_PPC_PSERIES */
+
+static int lparcfg_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, lparcfg_data, NULL);
+}
+
+struct file_operations lparcfg_fops = {
+      .owner	= THIS_MODULE,
+      .read	= seq_read,
+      .open	= lparcfg_open,
+      .release	= single_release,
+};
+
+int __init lparcfg_init(void)
+{
+	struct proc_dir_entry *ent;
+	mode_t mode = S_IRUSR | S_IRGRP | S_IROTH;
+
+	/* Allow writing if we have FW_FEATURE_SPLPAR */
+	if (firmware_has_feature(FW_FEATURE_SPLPAR)) {
+		lparcfg_fops.write = lparcfg_write;
+		mode |= S_IWUSR;
+	}
+
+	ent = create_proc_entry("ppc64/lparcfg", mode, NULL);
+	if (ent) {
+		ent->proc_fops = &lparcfg_fops;
+		ent->data = kmalloc(LPARCFG_BUFF_SIZE, GFP_KERNEL);
+		if (!ent->data) {
+			printk(KERN_ERR
+			       "Failed to allocate buffer for lparcfg\n");
+			remove_proc_entry("lparcfg", ent->parent);
+			return -ENOMEM;
+		}
+	} else {
+		printk(KERN_ERR "Failed to create ppc64/lparcfg\n");
+		return -EIO;
+	}
+
+	proc_ppc64_lparcfg = ent;
+	return 0;
+}
+
+void __exit lparcfg_cleanup(void)
+{
+	if (proc_ppc64_lparcfg) {
+		kfree(proc_ppc64_lparcfg->data);
+		remove_proc_entry("lparcfg", proc_ppc64_lparcfg->parent);
+	}
+}
+
+module_init(lparcfg_init);
+module_exit(lparcfg_cleanup);
+MODULE_DESCRIPTION("Interface for LPAR configuration data");
+MODULE_AUTHOR("Dave Engebretsen");
+MODULE_LICENSE("GPL");