powerpc: Move most remaining ppc64 files over to arch/powerpc

Also deletes files in arch/ppc64 that are no longer used now that
we don't compile with ARCH=ppc64 any more.

Signed-off-by: Paul Mackerras <paulus@samba.org>

1 files changed, 358 insertions, 0 deletions

diff --git a/arch/powerpc/kernel/machine_kexec_64.c b/arch/powerpc/kernel/machine_kexec_64.c
new file mode 100644
index 00000000000..97c51e452be
--- /dev/null
+++ b/arch/powerpc/kernel/machine_kexec_64.c
@@ -0,0 +1,358 @@
+/*
+ * machine_kexec.c - handle transition of Linux booting another kernel
+ *
+ * Copyright (C) 2004-2005, IBM Corp.
+ *
+ * Created by: Milton D Miller II
+ *
+ * This source code is licensed under the GNU General Public License,
+ * Version 2.  See the file COPYING for more details.
+ */
+
+
+#include <linux/cpumask.h>
+#include <linux/kexec.h>
+#include <linux/smp.h>
+#include <linux/thread_info.h>
+#include <linux/errno.h>
+
+#include <asm/page.h>
+#include <asm/current.h>
+#include <asm/machdep.h>
+#include <asm/cacheflush.h>
+#include <asm/paca.h>
+#include <asm/mmu.h>
+#include <asm/sections.h>	/* _end */
+#include <asm/prom.h>
+#include <asm/smp.h>
+
+#define HASH_GROUP_SIZE 0x80	/* size of each hash group, asm/mmu.h */
+
+/* Have this around till we move it into crash specific file */
+note_buf_t crash_notes[NR_CPUS];
+
+/* Dummy for now. Not sure if we need to have a crash shutdown in here
+ * and if what it will achieve. Letting it be now to compile the code
+ * in generic kexec environment
+ */
+void machine_crash_shutdown(struct pt_regs *regs)
+{
+	/* do nothing right now */
+	/* smp_relase_cpus() if we want smp on panic kernel */
+	/* cpu_irq_down to isolate us until we are ready */
+}
+
+int machine_kexec_prepare(struct kimage *image)
+{
+	int i;
+	unsigned long begin, end;	/* limits of segment */
+	unsigned long low, high;	/* limits of blocked memory range */
+	struct device_node *node;
+	unsigned long *basep;
+	unsigned int *sizep;
+
+	if (!ppc_md.hpte_clear_all)
+		return -ENOENT;
+
+	/*
+	 * Since we use the kernel fault handlers and paging code to
+	 * handle the virtual mode, we must make sure no destination
+	 * overlaps kernel static data or bss.
+	 */
+	for (i = 0; i < image->nr_segments; i++)
+		if (image->segment[i].mem < __pa(_end))
+			return -ETXTBSY;
+
+	/*
+	 * For non-LPAR, we absolutely can not overwrite the mmu hash
+	 * table, since we are still using the bolted entries in it to
+	 * do the copy.  Check that here.
+	 *
+	 * It is safe if the end is below the start of the blocked
+	 * region (end <= low), or if the beginning is after the
+	 * end of the blocked region (begin >= high).  Use the
+	 * boolean identity !(a || b)  === (!a && !b).
+	 */
+	if (htab_address) {
+		low = __pa(htab_address);
+		high = low + (htab_hash_mask + 1) * HASH_GROUP_SIZE;
+
+		for (i = 0; i < image->nr_segments; i++) {
+			begin = image->segment[i].mem;
+			end = begin + image->segment[i].memsz;
+
+			if ((begin < high) && (end > low))
+				return -ETXTBSY;
+		}
+	}
+
+	/* We also should not overwrite the tce tables */
+	for (node = of_find_node_by_type(NULL, "pci"); node != NULL;
+			node = of_find_node_by_type(node, "pci")) {
+		basep = (unsigned long *)get_property(node, "linux,tce-base",
+							NULL);
+		sizep = (unsigned int *)get_property(node, "linux,tce-size",
+							NULL);
+		if (basep == NULL || sizep == NULL)
+			continue;
+
+		low = *basep;
+		high = low + (*sizep);
+
+		for (i = 0; i < image->nr_segments; i++) {
+			begin = image->segment[i].mem;
+			end = begin + image->segment[i].memsz;
+
+			if ((begin < high) && (end > low))
+				return -ETXTBSY;
+		}
+	}
+
+	return 0;
+}
+
+void machine_kexec_cleanup(struct kimage *image)
+{
+	/* we do nothing in prepare that needs to be undone */
+}
+
+#define IND_FLAGS (IND_DESTINATION | IND_INDIRECTION | IND_DONE | IND_SOURCE)
+
+static void copy_segments(unsigned long ind)
+{
+	unsigned long entry;
+	unsigned long *ptr;
+	void *dest;
+	void *addr;
+
+	/*
+	 * We rely on kexec_load to create a lists that properly
+	 * initializes these pointers before they are used.
+	 * We will still crash if the list is wrong, but at least
+	 * the compiler will be quiet.
+	 */
+	ptr = NULL;
+	dest = NULL;
+
+	for (entry = ind; !(entry & IND_DONE); entry = *ptr++) {
+		addr = __va(entry & PAGE_MASK);
+
+		switch (entry & IND_FLAGS) {
+		case IND_DESTINATION:
+			dest = addr;
+			break;
+		case IND_INDIRECTION:
+			ptr = addr;
+			break;
+		case IND_SOURCE:
+			copy_page(dest, addr);
+			dest += PAGE_SIZE;
+		}
+	}
+}
+
+void kexec_copy_flush(struct kimage *image)
+{
+	long i, nr_segments = image->nr_segments;
+	struct  kexec_segment ranges[KEXEC_SEGMENT_MAX];
+
+	/* save the ranges on the stack to efficiently flush the icache */
+	memcpy(ranges, image->segment, sizeof(ranges));
+
+	/*
+	 * After this call we may not use anything allocated in dynamic
+	 * memory, including *image.
+	 *
+	 * Only globals and the stack are allowed.
+	 */
+	copy_segments(image->head);
+
+	/*
+	 * we need to clear the icache for all dest pages sometime,
+	 * including ones that were in place on the original copy
+	 */
+	for (i = 0; i < nr_segments; i++)
+		flush_icache_range(ranges[i].mem + KERNELBASE,
+				ranges[i].mem + KERNELBASE +
+				ranges[i].memsz);
+}
+
+#ifdef CONFIG_SMP
+
+/* FIXME: we should schedule this function to be called on all cpus based
+ * on calling the interrupts, but we would like to call it off irq level
+ * so that the interrupt controller is clean.
+ */
+void kexec_smp_down(void *arg)
+{
+	if (ppc_md.kexec_cpu_down)
+		ppc_md.kexec_cpu_down(0, 1);
+
+	local_irq_disable();
+	kexec_smp_wait();
+	/* NOTREACHED */
+}
+
+static void kexec_prepare_cpus(void)
+{
+	int my_cpu, i, notified=-1;
+
+	smp_call_function(kexec_smp_down, NULL, 0, /* wait */0);
+	my_cpu = get_cpu();
+
+	/* check the others cpus are now down (via paca hw cpu id == -1) */
+	for (i=0; i < NR_CPUS; i++) {
+		if (i == my_cpu)
+			continue;
+
+		while (paca[i].hw_cpu_id != -1) {
+			barrier();
+			if (!cpu_possible(i)) {
+				printk("kexec: cpu %d hw_cpu_id %d is not"
+						" possible, ignoring\n",
+						i, paca[i].hw_cpu_id);
+				break;
+			}
+			if (!cpu_online(i)) {
+				/* Fixme: this can be spinning in
+				 * pSeries_secondary_wait with a paca
+				 * waiting for it to go online.
+				 */
+				printk("kexec: cpu %d hw_cpu_id %d is not"
+						" online, ignoring\n",
+						i, paca[i].hw_cpu_id);
+				break;
+			}
+			if (i != notified) {
+				printk( "kexec: waiting for cpu %d (physical"
+						" %d) to go down\n",
+						i, paca[i].hw_cpu_id);
+				notified = i;
+			}
+		}
+	}
+
+	/* after we tell the others to go down */
+	if (ppc_md.kexec_cpu_down)
+		ppc_md.kexec_cpu_down(0, 0);
+
+	put_cpu();
+
+	local_irq_disable();
+}
+
+#else /* ! SMP */
+
+static void kexec_prepare_cpus(void)
+{
+	/*
+	 * move the secondarys to us so that we can copy
+	 * the new kernel 0-0x100 safely
+	 *
+	 * do this if kexec in setup.c ?
+	 *
+	 * We need to release the cpus if we are ever going from an
+	 * UP to an SMP kernel.
+	 */
+	smp_release_cpus();
+	if (ppc_md.kexec_cpu_down)
+		ppc_md.kexec_cpu_down(0, 0);
+	local_irq_disable();
+}
+
+#endif /* SMP */
+
+/*
+ * kexec thread structure and stack.
+ *
+ * We need to make sure that this is 16384-byte aligned due to the
+ * way process stacks are handled.  It also must be statically allocated
+ * or allocated as part of the kimage, because everything else may be
+ * overwritten when we copy the kexec image.  We piggyback on the
+ * "init_task" linker section here to statically allocate a stack.
+ *
+ * We could use a smaller stack if we don't care about anything using
+ * current, but that audit has not been performed.
+ */
+union thread_union kexec_stack
+	__attribute__((__section__(".data.init_task"))) = { };
+
+/* Our assembly helper, in kexec_stub.S */
+extern NORET_TYPE void kexec_sequence(void *newstack, unsigned long start,
+					void *image, void *control,
+					void (*clear_all)(void)) ATTRIB_NORET;
+
+/* too late to fail here */
+void machine_kexec(struct kimage *image)
+{
+
+	/* prepare control code if any */
+
+	/* shutdown other cpus into our wait loop and quiesce interrupts */
+	kexec_prepare_cpus();
+
+	/* switch to a staticly allocated stack.  Based on irq stack code.
+	 * XXX: the task struct will likely be invalid once we do the copy!
+	 */
+	kexec_stack.thread_info.task = current_thread_info()->task;
+	kexec_stack.thread_info.flags = 0;
+
+	/* Some things are best done in assembly.  Finding globals with
+	 * a toc is easier in C, so pass in what we can.
+	 */
+	kexec_sequence(&kexec_stack, image->start, image,
+			page_address(image->control_code_page),
+			ppc_md.hpte_clear_all);
+	/* NOTREACHED */
+}
+
+/* Values we need to export to the second kernel via the device tree. */
+static unsigned long htab_base, htab_size, kernel_end;
+
+static struct property htab_base_prop = {
+	.name = "linux,htab-base",
+	.length = sizeof(unsigned long),
+	.value = (unsigned char *)&htab_base,
+};
+
+static struct property htab_size_prop = {
+	.name = "linux,htab-size",
+	.length = sizeof(unsigned long),
+	.value = (unsigned char *)&htab_size,
+};
+
+static struct property kernel_end_prop = {
+	.name = "linux,kernel-end",
+	.length = sizeof(unsigned long),
+	.value = (unsigned char *)&kernel_end,
+};
+
+static void __init export_htab_values(void)
+{
+	struct device_node *node;
+
+	node = of_find_node_by_path("/chosen");
+	if (!node)
+		return;
+
+	kernel_end = __pa(_end);
+	prom_add_property(node, &kernel_end_prop);
+
+	/* On machines with no htab htab_address is NULL */
+	if (NULL == htab_address)
+		goto out;
+
+	htab_base = __pa(htab_address);
+	prom_add_property(node, &htab_base_prop);
+
+	htab_size = 1UL << ppc64_pft_size;
+	prom_add_property(node, &htab_size_prop);
+
+ out:
+	of_node_put(node);
+}
+
+void __init kexec_setup(void)
+{
+	export_htab_values();
+}