powerpc/47x: Kernel support for KEXEC

This patch adds support for creating 1:1 mapping for the PPC_47x during
a KEXEC. The implementation is similar to that of the PPC440x which is
described here :

	http://patchwork.ozlabs.org/patch/104323/

PPC_47x MMU :

The 47x uses Unified TLB 1024 entries, with 4-way associative mapping
(4 x 256 entries). The index to be used is calculated by the MMU by
hashing the PID, EPN and TS. The software can choose to specify the way
by setting bit 0(enable way select) and the way in bits 1-2 in the TLB
Word 0.

Implementation:

The patch erases all the UTLB entries which includes the tlb covering
the mapping for our code. The shadow TLB caches the mapping for the
running code which helps us to continue the execution until we do
isync/rfi. We then create a tmp mapping for the current code in the
other address space (TS) and switch to it.

Then we create a 1:1 mapping(EPN=RPN) for 0-2GiB in the original
address space and switch to the new mapping.

TODO: Add SMP support.

Signed-off-by: Suzuki K. Poulose <suzuki@in.ibm.com>
Signed-off-by: Josh Boyer <jwboyer@gmail.com>

1 files changed, 189 insertions, 6 deletions

diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S
index d7e05d20b55..386d57f66f2 100644
--- a/arch/powerpc/kernel/misc_32.S
+++ b/arch/powerpc/kernel/misc_32.S
@@ -738,8 +738,23 @@ relocate_new_kernel:
 	mr      r5, r31
 
 	li	r0, 0
-#elif defined(CONFIG_44x)  && !defined(CONFIG_PPC_47x)
+#elif defined(CONFIG_44x)
 
+	/* Save our parameters */
+	mr	r29, r3
+	mr	r30, r4
+	mr	r31, r5
+
+#ifdef CONFIG_PPC_47x
+	/* Check for 47x cores */
+	mfspr	r3,SPRN_PVR
+	srwi	r3,r3,16
+	cmplwi	cr0,r3,PVR_476@h
+	beq	setup_map_47x
+	cmplwi	cr0,r3,PVR_476_ISS@h
+	beq	setup_map_47x
+#endif /* CONFIG_PPC_47x */
+	
 /*
  * Code for setting up 1:1 mapping for PPC440x for KEXEC
  *
@@ -753,13 +768,8 @@ relocate_new_kernel:
  * 5) Invalidate the tmp mapping.
  *
  * - Based on the kexec support code for FSL BookE
- * - Doesn't support 47x yet.
  *
  */
-	/* Save our parameters */
-	mr	r29, r3
-	mr	r30, r4
-	mr	r31, r5
 
 	/* 
 	 * Load the PID with kernel PID (0).
@@ -904,6 +914,179 @@ next_tlb:
 	li	r3, 0
 	tlbwe	r3, r24, PPC44x_TLB_PAGEID
 	sync
+	b	ppc44x_map_done
+
+#ifdef CONFIG_PPC_47x
+
+	/* 1:1 mapping for 47x */
+
+setup_map_47x:
+
+	/*
+	 * Load the kernel pid (0) to PID and also to MMUCR[TID].
+	 * Also set the MSR IS->MMUCR STS
+	 */
+	li	r3, 0
+	mtspr	SPRN_PID, r3			/* Set PID */
+	mfmsr	r4				/* Get MSR */
+	andi.	r4, r4, MSR_IS@l		/* TS=1? */
+	beq	1f				/* If not, leave STS=0 */
+	oris	r3, r3, PPC47x_MMUCR_STS@h	/* Set STS=1 */
+1:	mtspr	SPRN_MMUCR, r3			/* Put MMUCR */
+	sync
+
+	/* Find the entry we are running from */
+	bl	2f
+2:	mflr	r23
+	tlbsx	r23, 0, r23
+	tlbre	r24, r23, 0			/* TLB Word 0 */
+	tlbre	r25, r23, 1			/* TLB Word 1 */
+	tlbre	r26, r23, 2			/* TLB Word 2 */
+
+
+	/*
+	 * Invalidates all the tlb entries by writing to 256 RPNs(r4)
+	 * of 4k page size in all  4 ways (0-3 in r3).
+	 * This would invalidate the entire UTLB including the one we are
+	 * running from. However the shadow TLB entries would help us 
+	 * to continue the execution, until we flush them (rfi/isync).
+	 */
+	addis	r3, 0, 0x8000			/* specify the way */
+	addi	r4, 0, 0			/* TLB Word0 = (EPN=0, VALID = 0) */
+	addi	r5, 0, 0
+	b	clear_utlb_entry
+
+	/* Align the loop to speed things up. from head_44x.S */
+	.align	6
+
+clear_utlb_entry:
+
+	tlbwe	r4, r3, 0
+	tlbwe	r5, r3, 1
+	tlbwe	r5, r3, 2
+	addis	r3, r3, 0x2000			/* Increment the way */
+	cmpwi	r3, 0
+	bne	clear_utlb_entry
+	addis	r3, 0, 0x8000
+	addis	r4, r4, 0x100			/* Increment the EPN */
+	cmpwi	r4, 0
+	bne	clear_utlb_entry
+
+	/* Create the entries in the other address space */
+	mfmsr	r5
+	rlwinm	r7, r5, 27, 31, 31		/* Get the TS (Bit 26) from MSR */
+	xori	r7, r7, 1			/* r7 = !TS */
+
+	insrwi	r24, r7, 1, 21			/* Change the TS in the saved TLB word 0 */
+
+	/* 
+	 * write out the TLB entries for the tmp mapping
+	 * Use way '0' so that we could easily invalidate it later.
+	 */
+	lis	r3, 0x8000			/* Way '0' */ 
+
+	tlbwe	r24, r3, 0
+	tlbwe	r25, r3, 1
+	tlbwe	r26, r3, 2
+
+	/* Update the msr to the new TS */
+	insrwi	r5, r7, 1, 26
+
+	bl	1f
+1:	mflr	r6
+	addi	r6, r6, (2f-1b)
+
+	mtspr	SPRN_SRR0, r6
+	mtspr	SPRN_SRR1, r5
+	rfi
+
+	/* 
+	 * Now we are in the tmp address space.
+	 * Create a 1:1 mapping for 0-2GiB in the original TS.
+	 */
+2:
+	li	r3, 0
+	li	r4, 0				/* TLB Word 0 */
+	li	r5, 0				/* TLB Word 1 */
+	li	r6, 0
+	ori	r6, r6, PPC47x_TLB2_S_RWX	/* TLB word 2 */
+
+	li	r8, 0				/* PageIndex */
+
+	xori	r7, r7, 1			/* revert back to original TS */
+
+write_utlb:
+	rotlwi	r5, r8, 28			/* RPN = PageIndex * 256M */
+						/* ERPN = 0 as we don't use memory above 2G */
+
+	mr	r4, r5				/* EPN = RPN */
+	ori	r4, r4, (PPC47x_TLB0_VALID | PPC47x_TLB0_256M)
+	insrwi	r4, r7, 1, 21			/* Insert the TS to Word 0 */
+
+	tlbwe	r4, r3, 0			/* Write out the entries */
+	tlbwe	r5, r3, 1
+	tlbwe	r6, r3, 2
+	addi	r8, r8, 1
+	cmpwi	r8, 8				/* Have we completed ? */
+	bne	write_utlb
+
+	/* make sure we complete the TLB write up */
+	isync
+
+	/* 
+	 * Prepare to jump to the 1:1 mapping.
+	 * 1) Extract page size of the tmp mapping
+	 *    DSIZ = TLB_Word0[22:27]
+	 * 2) Calculate the physical address of the address
+	 *    to jump to.
+	 */
+	rlwinm	r10, r24, 0, 22, 27
+
+	cmpwi	r10, PPC47x_TLB0_4K
+	bne	0f
+	li	r10, 0x1000			/* r10 = 4k */
+	bl	1f
+
+0:
+	/* Defaults to 256M */
+	lis	r10, 0x1000
+	
+	bl	1f
+1:	mflr	r4
+	addi	r4, r4, (2f-1b)			/* virtual address  of 2f */
+
+	subi	r11, r10, 1			/* offsetmask = Pagesize - 1 */
+	not	r10, r11			/* Pagemask = ~(offsetmask) */
+
+	and	r5, r25, r10			/* Physical page */
+	and	r6, r4, r11			/* offset within the current page */
+
+	or	r5, r5, r6			/* Physical address for 2f */
+
+	/* Switch the TS in MSR to the original one */
+	mfmsr	r8
+	insrwi	r8, r7, 1, 26
+
+	mtspr	SPRN_SRR1, r8
+	mtspr	SPRN_SRR0, r5
+	rfi
+
+2:
+	/* Invalidate the tmp mapping */
+	lis	r3, 0x8000			/* Way '0' */
+
+	clrrwi	r24, r24, 12			/* Clear the valid bit */
+	tlbwe	r24, r3, 0
+	tlbwe	r25, r3, 1
+	tlbwe	r26, r3, 2
+
+	/* Make sure we complete the TLB write and flush the shadow TLB */
+	isync
+
+#endif
+
+ppc44x_map_done:
+
 
 	/* Restore the parameters */
 	mr	r3, r29