Merge tag 'drm-intel-fixes-2013-11-07' of git://people.freedesktop.org/~danvet/drm-intel into drm-next

Bit a bit -fixes pull request in the merge window than usual dua to two
feauture-y things:
- Display CRCs are now enabled on all platforms, including the odd DP case
  on gm45/vlv. Since this is a testing-only feature it should ever hurt,
  but I figured it'll help with regression-testing -fixes. So I left it
  in and didn't postpone it to 3.14.
- Display power well refactoring from Imre. Would have caused major pain
  conflict with the bdw stage 1 patches if I'd postpone this to -next.
  It's only an relatively small interface rework, so shouldn't cause pain.
  It's also been in my tree since almost 3 weeks already.

That accounts for about two thirds of the pull, otherwise just bugfixes:
- vlv backlight fix from Jesse/Jani
- vlv vblank timestamp fix from Jesse
- improved edp detection through vbt from Ville (fixes a vlv issue)
- eDP vdd fix from Paulo
- fixes for dvo lvds on i830M
- a few smaller things all over

Note: This contains a backmerge of v3.12. Since the -internal branch
always applied on top of -nightly I need that unified base to merge bdw
patches. So you'll get a conflict with radeon connector props when pulling
this (and nouveau/master will also conflict a bit when Ben doesn't
rebase). The backmerge itself only had conflicts in drm/i915.

There's also a tiny conflict between Jani's backlight fix and your sysfs
lifetime fix in drm-next.

* tag 'drm-intel-fixes-2013-11-07' of git://people.freedesktop.org/~danvet/drm-intel: (940 commits)
  drm/i915/vlv: use per-pipe backlight controls v2
  drm/i915: make backlight functions take a connector
  drm/i915: move opregion asle request handling to a work queue
  drm/i915/vlv: use PIPE_START_VBLANK interrupts on VLV
  drm/i915: Make intel_dp_is_edp() less specific
  drm/i915: Give names to the VBT child device type bits
  drm/i915/vlv: enable HDA display audio for Valleyview2
  drm/i915/dvo: call ->mode_set callback only when the port is running
  drm/i915: avoid unclaimed registers when capturing the error state
  drm/i915: Enable DP port CRC for the "auto" source on g4x/vlv
  drm/i915: scramble reset support for DP port CRC on vlv
  drm/i915: scramble reset support for DP port CRC on g4x
  drm/i916: add "auto" pipe CRC source
  ...

Conflicts:
	MAINTAINERS
	drivers/gpu/drm/i915/intel_panel.c
	drivers/gpu/drm/nouveau/core/subdev/mc/base.c
	drivers/gpu/drm/radeon/atombios_encoders.c
	drivers/gpu/drm/radeon/radeon_connectors.c

1 files changed, 64 insertions, 31 deletions

diff --git a/arch/powerpc/kernel/tm.S b/arch/powerpc/kernel/tm.S
index 7b60b985146..cd809eaa8b5 100644
--- a/arch/powerpc/kernel/tm.S
+++ b/arch/powerpc/kernel/tm.S
@@ -79,6 +79,11 @@ _GLOBAL(tm_abort)
 	TABORT(R3)
 	blr
 
+	.section	".toc","aw"
+DSCR_DEFAULT:
+	.tc dscr_default[TC],dscr_default
+
+	.section	".text"
 
 /* void tm_reclaim(struct thread_struct *thread,
  *                 unsigned long orig_msr,
@@ -123,6 +128,7 @@ _GLOBAL(tm_reclaim)
 	mr	r15, r14
 	ori	r15, r15, MSR_FP
 	li	r16, MSR_RI
+	ori	r16, r16, MSR_EE /* IRQs hard off */
 	andc	r15, r15, r16
 	oris	r15, r15, MSR_VEC@h
 #ifdef CONFIG_VSX
@@ -187,11 +193,18 @@ dont_backup_fp:
 	std	r1, PACATMSCRATCH(r13)
 	ld	r1, PACAR1(r13)
 
+	/* Store the PPR in r11 and reset to decent value */
+	std	r11, GPR11(r1)			/* Temporary stash */
+	mfspr	r11, SPRN_PPR
+	HMT_MEDIUM
+
 	/* Now get some more GPRS free */
 	std	r7, GPR7(r1)			/* Temporary stash */
 	std	r12, GPR12(r1)			/* ''   ''    ''   */
 	ld	r12, STACK_PARAM(0)(r1)		/* Param 0, thread_struct * */
 
+	std	r11, THREAD_TM_PPR(r12)		/* Store PPR and free r11 */
+
 	addi	r7, r12, PT_CKPT_REGS		/* Thread's ckpt_regs */
 
 	/* Make r7 look like an exception frame so that we
@@ -203,15 +216,19 @@ dont_backup_fp:
 	SAVE_GPR(0, r7)				/* user r0 */
 	SAVE_GPR(2, r7)			/* user r2 */
 	SAVE_4GPRS(3, r7)			/* user r3-r6 */
-	SAVE_4GPRS(8, r7)			/* user r8-r11 */
+	SAVE_GPR(8, r7)				/* user r8 */
+	SAVE_GPR(9, r7)				/* user r9 */
+	SAVE_GPR(10, r7)			/* user r10 */
 	ld	r3, PACATMSCRATCH(r13)		/* user r1 */
 	ld	r4, GPR7(r1)			/* user r7 */
-	ld	r5, GPR12(r1)			/* user r12 */
-	GET_SCRATCH0(6)				/* user r13 */
+	ld	r5, GPR11(r1)			/* user r11 */
+	ld	r6, GPR12(r1)			/* user r12 */
+	GET_SCRATCH0(8)				/* user r13 */
 	std	r3, GPR1(r7)
 	std	r4, GPR7(r7)
-	std	r5, GPR12(r7)
-	std	r6, GPR13(r7)
+	std	r5, GPR11(r7)
+	std	r6, GPR12(r7)
+	std	r8, GPR13(r7)
 
 	SAVE_NVGPRS(r7)				/* user r14-r31 */
 
@@ -234,14 +251,12 @@ dont_backup_fp:
 	std	r6, _XER(r7)
 
 
-	/* ******************** TAR, PPR, DSCR ********** */
+	/* ******************** TAR, DSCR ********** */
 	mfspr	r3, SPRN_TAR
-	mfspr	r4, SPRN_PPR
-	mfspr	r5, SPRN_DSCR
+	mfspr	r4, SPRN_DSCR
 
 	std	r3, THREAD_TM_TAR(r12)
-	std	r4, THREAD_TM_PPR(r12)
-	std	r5, THREAD_TM_DSCR(r12)
+	std	r4, THREAD_TM_DSCR(r12)
 
 	/* MSR and flags:  We don't change CRs, and we don't need to alter
 	 * MSR.
@@ -258,7 +273,7 @@ dont_backup_fp:
 	std	r3, THREAD_TM_TFHAR(r12)
 	std	r4, THREAD_TM_TFIAR(r12)
 
-	/* AMR and PPR are checkpointed too, but are unsupported by Linux. */
+	/* AMR is checkpointed too, but is unsupported by Linux. */
 
 	/* Restore original MSR/IRQ state & clear TM mode */
 	ld	r14, TM_FRAME_L0(r1)		/* Orig MSR */
@@ -274,6 +289,12 @@ dont_backup_fp:
 	mtcr	r4
 	mtlr	r0
 	ld	r2, 40(r1)
+
+	/* Load system default DSCR */
+	ld	r4, DSCR_DEFAULT@toc(r2)
+	ld	r0, 0(r4)
+	mtspr	SPRN_DSCR, r0
+
 	blr
 
 
@@ -358,25 +379,24 @@ dont_restore_fp:
 
 restore_gprs:
 
-	/* ******************** TAR, PPR, DSCR ********** */
-	ld	r4, THREAD_TM_TAR(r3)
-	ld	r5, THREAD_TM_PPR(r3)
-	ld	r6, THREAD_TM_DSCR(r3)
+	/* ******************** CR,LR,CCR,MSR ********** */
+	ld	r4, _CTR(r7)
+	ld	r5, _LINK(r7)
+	ld	r6, _CCR(r7)
+	ld	r8, _XER(r7)
 
-	mtspr	SPRN_TAR,	r4
-	mtspr	SPRN_PPR,	r5
-	mtspr	SPRN_DSCR,	r6
+	mtctr	r4
+	mtlr	r5
+	mtcr	r6
+	mtxer	r8
 
-	/* ******************** CR,LR,CCR,MSR ********** */
-	ld	r3, _CTR(r7)
-	ld	r4, _LINK(r7)
-	ld	r5, _CCR(r7)
-	ld	r6, _XER(r7)
+	/* ******************** TAR ******************** */
+	ld	r4, THREAD_TM_TAR(r3)
+	mtspr	SPRN_TAR,	r4
 
-	mtctr	r3
-	mtlr	r4
-	mtcr	r5
-	mtxer	r6
+	/* Load up the PPR and DSCR in GPRs only at this stage */
+	ld	r5, THREAD_TM_DSCR(r3)
+	ld	r6, THREAD_TM_PPR(r3)
 
 	/* Clear the MSR RI since we are about to change R1.  EE is already off
 	 */
@@ -384,19 +404,26 @@ restore_gprs:
 	mtmsrd	r4, 1
 
 	REST_4GPRS(0, r7)			/* GPR0-3 */
-	REST_GPR(4, r7)				/* GPR4-6 */
-	REST_GPR(5, r7)
-	REST_GPR(6, r7)
+	REST_GPR(4, r7)				/* GPR4 */
 	REST_4GPRS(8, r7)			/* GPR8-11 */
 	REST_2GPRS(12, r7)			/* GPR12-13 */
 
 	REST_NVGPRS(r7)				/* GPR14-31 */
 
-	ld	r7, GPR7(r7)			/* GPR7 */
+	/* Load up PPR and DSCR here so we don't run with user values for long
+	 */
+	mtspr	SPRN_DSCR, r5
+	mtspr	SPRN_PPR, r6
+
+	REST_GPR(5, r7)				/* GPR5-7 */
+	REST_GPR(6, r7)
+	ld	r7, GPR7(r7)
 
 	/* Commit register state as checkpointed state: */
 	TRECHKPT
 
+	HMT_MEDIUM
+
 	/* Our transactional state has now changed.
 	 *
 	 * Now just get out of here.  Transactional (current) state will be
@@ -419,6 +446,12 @@ restore_gprs:
 	mtcr	r4
 	mtlr	r0
 	ld	r2, 40(r1)
+
+	/* Load system default DSCR */
+	ld	r4, DSCR_DEFAULT@toc(r2)
+	ld	r0, 0(r4)
+	mtspr	SPRN_DSCR, r0
+
 	blr
 
 	/* ****************************************************************** */