Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc

Pull powerpc updates from Ben Herrenschmidt:
 "Here is the bulk of the powerpc changes for this merge window.  It got
  a bit delayed in part because I wasn't paying attention, and in part
  because I discovered I had a core PCI change without a PCI maintainer
  ack in it.  Bjorn eventually agreed it was ok to merge it though we'll
  probably improve it later and I didn't want to rebase to add his ack.

  There is going to be a bit more next week, essentially fixes that I
  still want to sort through and test.

  The biggest item this time is the support to build the ppc64 LE kernel
  with our new v2 ABI.  We previously supported v2 userspace but the
  kernel itself was a tougher nut to crack.  This is now sorted mostly
  thanks to Anton and Rusty.

  We also have a fairly big series from Cedric that add support for
  64-bit LE zImage boot wrapper.  This was made harder by the fact that
  traditionally our zImage wrapper was always 32-bit, but our new LE
  toolchains don't really support 32-bit anymore (it's somewhat there
  but not really "supported") so we didn't want to rely on it.  This
  meant more churn that just endian fixes.

  This brings some more LE bits as well, such as the ability to run in
  LE mode without a hypervisor (ie. under OPAL firmware) by doing the
  right OPAL call to reinitialize the CPU to take HV interrupts in the
  right mode and the usual pile of endian fixes.

  There's another series from Gavin adding EEH improvements (one day we
  *will* have a release with less than 20 EEH patches, I promise!).

  Another highlight is the support for the "Split core" functionality on
  P8 by Michael.  This allows a P8 core to be split into "sub cores" of
  4 threads which allows the subcores to run different guests under KVM
  (the HW still doesn't support a partition per thread).

  And then the usual misc bits and fixes ..."

[ Further delayed by gmail deciding that BenH is a dirty spammer.
  Google knows.  ]

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (155 commits)
  powerpc/powernv: Add missing include to LPC code
  selftests/powerpc: Test the THP bug we fixed in the previous commit
  powerpc/mm: Check paca psize is up to date for huge mappings
  powerpc/powernv: Pass buffer size to OPAL validate flash call
  powerpc/pseries: hcall functions are exported to modules, need _GLOBAL_TOC()
  powerpc: Exported functions __clear_user and copy_page use r2 so need _GLOBAL_TOC()
  powerpc/powernv: Set memory_block_size_bytes to 256MB
  powerpc: Allow ppc_md platform hook to override memory_block_size_bytes
  powerpc/powernv: Fix endian issues in memory error handling code
  powerpc/eeh: Skip eeh sysfs when eeh is disabled
  powerpc: 64bit sendfile is capped at 2GB
  powerpc/powernv: Provide debugfs access to the LPC bus via OPAL
  powerpc/serial: Use saner flags when creating legacy ports
  powerpc: Add cpu family documentation
  powerpc/xmon: Fix up xmon format strings
  powerpc/powernv: Add calls to support little endian host
  powerpc: Document sysfs DSCR interface
  powerpc: Fix regression of per-CPU DSCR setting
  powerpc: Split __SYSFS_SPRSETUP macro
  arch: powerpc/fadump: Cleaning up inconsistent NULL checks
  ...

1 files changed, 45 insertions, 24 deletions

diff --git a/arch/powerpc/kernel/tm.S b/arch/powerpc/kernel/tm.S
index 03567c05950..2a324f4cb1b 100644
--- a/arch/powerpc/kernel/tm.S
+++ b/arch/powerpc/kernel/tm.S
@@ -10,6 +10,7 @@
 #include <asm/ppc-opcode.h>
 #include <asm/ptrace.h>
 #include <asm/reg.h>
+#include <asm/bug.h>
 
 #ifdef CONFIG_VSX
 /* See fpu.S, this is borrowed from there */
@@ -41,7 +42,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_VSX);		\
 /* Stack frame offsets for local variables. */
 #define TM_FRAME_L0	TM_FRAME_SIZE-16
 #define TM_FRAME_L1	TM_FRAME_SIZE-8
-#define STACK_PARAM(x)	(48+((x)*8))
 
 
 /* In order to access the TM SPRs, TM must be enabled.  So, do so: */
@@ -78,12 +78,6 @@ _GLOBAL(tm_abort)
 	TABORT(R3)
 	blr
 
-	.section	".toc","aw"
-DSCR_DEFAULT:
-	.tc dscr_default[TC],dscr_default
-
-	.section	".text"
-
 /* void tm_reclaim(struct thread_struct *thread,
  *                 unsigned long orig_msr,
  *		   uint8_t cause)
@@ -108,12 +102,12 @@ _GLOBAL(tm_reclaim)
 	mflr	r0
 	stw	r6, 8(r1)
 	std	r0, 16(r1)
-	std	r2, 40(r1)
+	std	r2, STK_GOT(r1)
 	stdu	r1, -TM_FRAME_SIZE(r1)
 
 	/* We've a struct pt_regs at [r1+STACK_FRAME_OVERHEAD]. */
 
-	std	r3, STACK_PARAM(0)(r1)
+	std	r3, STK_PARAM(R3)(r1)
 	SAVE_NVGPRS(r1)
 
 	/* We need to setup MSR for VSX register save instructions.  Here we
@@ -175,6 +169,13 @@ dont_backup_vec:
 	stfd    fr0,FPSTATE_FPSCR(r7)
 
 dont_backup_fp:
+	/* Do sanity check on MSR to make sure we are suspended */
+	li	r7, (MSR_TS_S)@higher
+	srdi	r6, r14, 32
+	and	r6, r6, r7
+1:	tdeqi   r6, 0
+	EMIT_BUG_ENTRY 1b,__FILE__,__LINE__,0
+
 	/* The moment we treclaim, ALL of our GPRs will switch
 	 * to user register state.  (FPRs, CCR etc. also!)
 	 * Use an sprg and a tm_scratch in the PACA to shuffle.
@@ -202,7 +203,7 @@ dont_backup_fp:
 	/* Now get some more GPRS free */
 	std	r7, GPR7(r1)			/* Temporary stash */
 	std	r12, GPR12(r1)			/* ''   ''    ''   */
-	ld	r12, STACK_PARAM(0)(r1)		/* Param 0, thread_struct * */
+	ld	r12, STK_PARAM(R3)(r1)		/* Param 0, thread_struct * */
 
 	std	r11, THREAD_TM_PPR(r12)		/* Store PPR and free r11 */
 
@@ -289,11 +290,10 @@ dont_backup_fp:
 	ld	r0, 16(r1)
 	mtcr	r4
 	mtlr	r0
-	ld	r2, 40(r1)
+	ld	r2, STK_GOT(r1)
 
-	/* Load system default DSCR */
-	ld	r4, DSCR_DEFAULT@toc(r2)
-	ld	r0, 0(r4)
+	/* Load CPU's default DSCR */
+	ld	r0, PACA_DSCR(r13)
 	mtspr	SPRN_DSCR, r0
 
 	blr
@@ -312,7 +312,7 @@ _GLOBAL(__tm_recheckpoint)
 	mflr	r0
 	stw	r5, 8(r1)
 	std	r0, 16(r1)
-	std	r2, 40(r1)
+	std	r2, STK_GOT(r1)
 	stdu	r1, -TM_FRAME_SIZE(r1)
 
 	/* We've a struct pt_regs at [r1+STACK_FRAME_OVERHEAD].
@@ -320,8 +320,6 @@ _GLOBAL(__tm_recheckpoint)
 	 */
 	SAVE_NVGPRS(r1)
 
-	std	r1, PACAR1(r13)
-
 	/* Load complete register state from ts_ckpt* registers */
 
 	addi	r7, r3, PT_CKPT_REGS		/* Thread's ckpt_regs */
@@ -385,12 +383,10 @@ restore_gprs:
 	/* ******************** CR,LR,CCR,MSR ********** */
 	ld	r4, _CTR(r7)
 	ld	r5, _LINK(r7)
-	ld	r6, _CCR(r7)
 	ld	r8, _XER(r7)
 
 	mtctr	r4
 	mtlr	r5
-	mtcr	r6
 	mtxer	r8
 
 	/* ******************** TAR ******************** */
@@ -406,7 +402,8 @@ restore_gprs:
 	li	r4, 0
 	mtmsrd	r4, 1
 
-	REST_4GPRS(0, r7)			/* GPR0-3 */
+	REST_GPR(0, r7)				/* GPR0 */
+	REST_2GPRS(2, r7)			/* GPR2-3 */
 	REST_GPR(4, r7)				/* GPR4 */
 	REST_4GPRS(8, r7)			/* GPR8-11 */
 	REST_2GPRS(12, r7)			/* GPR12-13 */
@@ -418,6 +415,31 @@ restore_gprs:
 	mtspr	SPRN_DSCR, r5
 	mtspr	SPRN_PPR, r6
 
+	/* Do final sanity check on TEXASR to make sure FS is set.  Do this
+	 * here before we load up the userspace r1 so any bugs we hit will get
+	 * a call chain */
+	mfspr	r5, SPRN_TEXASR
+	srdi	r5, r5, 16
+	li	r6, (TEXASR_FS)@h
+	and	r6, r6, r5
+1:	tdeqi	r6, 0
+	EMIT_BUG_ENTRY 1b,__FILE__,__LINE__,0
+
+	/* Do final sanity check on MSR to make sure we are not transactional
+	 * or suspended
+	 */
+	mfmsr   r6
+	li	r5, (MSR_TS_MASK)@higher
+	srdi	r6, r6, 32
+	and	r6, r6, r5
+1:	tdnei   r6, 0
+	EMIT_BUG_ENTRY 1b,__FILE__,__LINE__,0
+
+	/* Restore CR */
+	ld	r6, _CCR(r7)
+	mtcr    r6
+
+	REST_GPR(1, r7)				/* GPR1 */
 	REST_GPR(5, r7)				/* GPR5-7 */
 	REST_GPR(6, r7)
 	ld	r7, GPR7(r7)
@@ -448,11 +470,10 @@ restore_gprs:
 	ld	r0, 16(r1)
 	mtcr	r4
 	mtlr	r0
-	ld	r2, 40(r1)
+	ld	r2, STK_GOT(r1)
 
-	/* Load system default DSCR */
-	ld	r4, DSCR_DEFAULT@toc(r2)
-	ld	r0, 0(r4)
+	/* Load CPU's default DSCR */
+	ld	r0, PACA_DSCR(r13)
 	mtspr	SPRN_DSCR, r0
 
 	blr