Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc

Pull powerpc updates from Ben Herrenschmidt:
 "So here's my next branch for powerpc.  A bit late as I was on vacation
  last week.  It's mostly the same stuff that was in next already, I
  just added two patches today which are the wiring up of lockref for
  powerpc, which for some reason fell through the cracks last time and
  is trivial.

  The highlights are, in addition to a bunch of bug fixes:

   - Reworked Machine Check handling on kernels running without a
     hypervisor (or acting as a hypervisor).  Provides hooks to handle
     some errors in real mode such as TLB errors, handle SLB errors,
     etc...

   - Support for retrieving memory error information from the service
     processor on IBM servers running without a hypervisor and routing
     them to the memory poison infrastructure.

   - _PAGE_NUMA support on server processors

   - 32-bit BookE relocatable kernel support

   - FSL e6500 hardware tablewalk support

   - A bunch of new/revived board support

   - FSL e6500 deeper idle states and altivec powerdown support

  You'll notice a generic mm change here, it has been acked by the
  relevant authorities and is a pre-req for our _PAGE_NUMA support"

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (121 commits)
  powerpc: Implement arch_spin_is_locked() using arch_spin_value_unlocked()
  powerpc: Add support for the optimised lockref implementation
  powerpc/powernv: Call OPAL sync before kexec'ing
  powerpc/eeh: Escalate error on non-existing PE
  powerpc/eeh: Handle multiple EEH errors
  powerpc: Fix transactional FP/VMX/VSX unavailable handlers
  powerpc: Don't corrupt transactional state when using FP/VMX in kernel
  powerpc: Reclaim two unused thread_info flag bits
  powerpc: Fix races with irq_work
  Move precessing of MCE queued event out from syscall exit path.
  pseries/cpuidle: Remove redundant call to ppc64_runlatch_off() in cpu idle routines
  powerpc: Make add_system_ram_resources() __init
  powerpc: add SATA_MV to ppc64_defconfig
  powerpc/powernv: Increase candidate fw image size
  powerpc: Add debug checks to catch invalid cpu-to-node mappings
  powerpc: Fix the setup of CPU-to-Node mappings during CPU online
  powerpc/iommu: Don't detach device without IOMMU group
  powerpc/eeh: Hotplug improvement
  powerpc/eeh: Call opal_pci_reinit() on powernv for restoring config space
  powerpc/eeh: Add restore_config operation
  ...

2 files changed, 26 insertions, 26 deletions

diff --git a/arch/powerpc/kvm/book3s_hv_ras.c b/arch/powerpc/kvm/book3s_hv_ras.c
index a353c485808..768a9f977c0 100644
--- a/arch/powerpc/kvm/book3s_hv_ras.c
+++ b/arch/powerpc/kvm/book3s_hv_ras.c
@@ -12,6 +12,7 @@
 #include <linux/kvm_host.h>
 #include <linux/kernel.h>
 #include <asm/opal.h>
+#include <asm/mce.h>
 
 /* SRR1 bits for machine check on POWER7 */
 #define SRR1_MC_LDSTERR		(1ul << (63-42))
@@ -58,18 +59,6 @@ static void reload_slb(struct kvm_vcpu *vcpu)
 	}
 }
 
-/* POWER7 TLB flush */
-static void flush_tlb_power7(struct kvm_vcpu *vcpu)
-{
-	unsigned long i, rb;
-
-	rb = TLBIEL_INVAL_SET_LPID;
-	for (i = 0; i < POWER7_TLB_SETS; ++i) {
-		asm volatile("tlbiel %0" : : "r" (rb));
-		rb += 1 << TLBIEL_INVAL_SET_SHIFT;
-	}
-}
-
 /*
  * On POWER7, see if we can handle a machine check that occurred inside
  * the guest in real mode, without switching to the host partition.
@@ -79,9 +68,7 @@ static void flush_tlb_power7(struct kvm_vcpu *vcpu)
 static long kvmppc_realmode_mc_power7(struct kvm_vcpu *vcpu)
 {
 	unsigned long srr1 = vcpu->arch.shregs.msr;
-#ifdef CONFIG_PPC_POWERNV
-	struct opal_machine_check_event *opal_evt;
-#endif
+	struct machine_check_event mce_evt;
 	long handled = 1;
 
 	if (srr1 & SRR1_MC_LDSTERR) {
@@ -96,7 +83,8 @@ static long kvmppc_realmode_mc_power7(struct kvm_vcpu *vcpu)
 				   DSISR_MC_SLB_PARITY | DSISR_MC_DERAT_MULTI);
 		}
 		if (dsisr & DSISR_MC_TLB_MULTI) {
-			flush_tlb_power7(vcpu);
+			if (cur_cpu_spec && cur_cpu_spec->flush_tlb)
+				cur_cpu_spec->flush_tlb(TLBIEL_INVAL_SET_LPID);
 			dsisr &= ~DSISR_MC_TLB_MULTI;
 		}
 		/* Any other errors we don't understand? */
@@ -113,28 +101,38 @@ static long kvmppc_realmode_mc_power7(struct kvm_vcpu *vcpu)
 		reload_slb(vcpu);
 		break;
 	case SRR1_MC_IFETCH_TLBMULTI:
-		flush_tlb_power7(vcpu);
+		if (cur_cpu_spec && cur_cpu_spec->flush_tlb)
+			cur_cpu_spec->flush_tlb(TLBIEL_INVAL_SET_LPID);
 		break;
 	default:
 		handled = 0;
 	}
 
-#ifdef CONFIG_PPC_POWERNV
 	/*
-	 * See if OPAL has already handled the condition.
-	 * We assume that if the condition is recovered then OPAL
+	 * See if we have already handled the condition in the linux host.
+	 * We assume that if the condition is recovered then linux host
 	 * will have generated an error log event that we will pick
 	 * up and log later.
+	 * Don't release mce event now. In case if condition is not
+	 * recovered we do guest exit and go back to linux host machine
+	 * check handler. Hence we need make sure that current mce event
+	 * is available for linux host to consume.
 	 */
-	opal_evt = local_paca->opal_mc_evt;
-	if (opal_evt->version == OpalMCE_V1 &&
-	    (opal_evt->severity == OpalMCE_SEV_NO_ERROR ||
-	     opal_evt->disposition == OpalMCE_DISPOSITION_RECOVERED))
+	if (!get_mce_event(&mce_evt, MCE_EVENT_DONTRELEASE))
+		goto out;
+
+	if (mce_evt.version == MCE_V1 &&
+	    (mce_evt.severity == MCE_SEV_NO_ERROR ||
+	     mce_evt.disposition == MCE_DISPOSITION_RECOVERED))
 		handled = 1;
 
+out:
+	/*
+	 * If we have handled the error, then release the mce event because
+	 * we will be delivering machine check to guest.
+	 */
 	if (handled)
-		opal_evt->in_use = 0;
-#endif
+		release_mce_event();
 
 	return handled;
 }
diff --git a/arch/powerpc/kvm/bookehv_interrupts.S b/arch/powerpc/kvm/bookehv_interrupts.S
index e8ed7d659c5..a0d6929d867 100644
--- a/arch/powerpc/kvm/bookehv_interrupts.S
+++ b/arch/powerpc/kvm/bookehv_interrupts.S
@@ -319,6 +319,8 @@ kvm_handler BOOKE_INTERRUPT_DEBUG, EX_PARAMS(DBG), \
 	SPRN_DSRR0, SPRN_DSRR1, 0
 kvm_handler BOOKE_INTERRUPT_DEBUG, EX_PARAMS(CRIT), \
 	SPRN_CSRR0, SPRN_CSRR1, 0
+kvm_handler BOOKE_INTERRUPT_LRAT_ERROR, EX_PARAMS(GEN), \
+	SPRN_SRR0, SPRN_SRR1, (NEED_EMU | NEED_DEAR | NEED_ESR)
 #else
 /*
  * For input register values, see arch/powerpc/include/asm/kvm_booke_hv_asm.h