powerpc: Merge 32-bit CHRP support.

SMP still needs more work but UP gets as far as starting userspace
at least.  This uses the 64-bit-style code for spinning up the cpus.

Signed-off-by: Paul Mackerras <paulus@samba.org>

1 files changed, 523 insertions, 0 deletions

diff --git a/arch/powerpc/platforms/chrp/setup.c b/arch/powerpc/platforms/chrp/setup.c
new file mode 100644
index 00000000000..5145990e6a0
--- /dev/null
+++ b/arch/powerpc/platforms/chrp/setup.c
@@ -0,0 +1,523 @@
+/*
+ *  arch/ppc/platforms/setup.c
+ *
+ *  Copyright (C) 1995  Linus Torvalds
+ *  Adapted from 'alpha' version by Gary Thomas
+ *  Modified by Cort Dougan (cort@cs.nmt.edu)
+ */
+
+/*
+ * bootup setup stuff..
+ */
+
+#include <linux/config.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/stddef.h>
+#include <linux/unistd.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/user.h>
+#include <linux/a.out.h>
+#include <linux/tty.h>
+#include <linux/major.h>
+#include <linux/interrupt.h>
+#include <linux/reboot.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/version.h>
+#include <linux/adb.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/ide.h>
+#include <linux/console.h>
+#include <linux/seq_file.h>
+#include <linux/root_dev.h>
+#include <linux/initrd.h>
+#include <linux/module.h>
+
+#include <asm/io.h>
+#include <asm/pgtable.h>
+#include <asm/prom.h>
+#include <asm/gg2.h>
+#include <asm/pci-bridge.h>
+#include <asm/dma.h>
+#include <asm/machdep.h>
+#include <asm/irq.h>
+#include <asm/hydra.h>
+#include <asm/sections.h>
+#include <asm/time.h>
+#include <asm/btext.h>
+#include <asm/i8259.h>
+#include <asm/mpic.h>
+#include <asm/rtas.h>
+#include <asm/xmon.h>
+
+void chrp_get_rtc_time(struct rtc_time *);
+int chrp_set_rtc_time(struct rtc_time *);
+void chrp_calibrate_decr(void);
+long chrp_time_init(void);
+
+void chrp_find_bridges(void);
+void chrp_event_scan(void);
+void rtas_indicator_progress(char *, unsigned short);
+void btext_progress(char *, unsigned short);
+
+int _chrp_type;
+EXPORT_SYMBOL(_chrp_type);
+
+struct mpic *chrp_mpic;
+
+/*
+ * XXX this should be in xmon.h, but putting it there means xmon.h
+ * has to include <linux/interrupt.h> (to get irqreturn_t), which
+ * causes all sorts of problems.  -- paulus
+ */
+extern irqreturn_t xmon_irq(int, void *, struct pt_regs *);
+
+extern unsigned long loops_per_jiffy;
+
+#ifdef CONFIG_SMP
+extern struct smp_ops_t chrp_smp_ops;
+#endif
+
+static const char *gg2_memtypes[4] = {
+	"FPM", "SDRAM", "EDO", "BEDO"
+};
+static const char *gg2_cachesizes[4] = {
+	"256 KB", "512 KB", "1 MB", "Reserved"
+};
+static const char *gg2_cachetypes[4] = {
+	"Asynchronous", "Reserved", "Flow-Through Synchronous",
+	"Pipelined Synchronous"
+};
+static const char *gg2_cachemodes[4] = {
+	"Disabled", "Write-Through", "Copy-Back", "Transparent Mode"
+};
+
+void chrp_show_cpuinfo(struct seq_file *m)
+{
+	int i, sdramen;
+	unsigned int t;
+	struct device_node *root;
+	const char *model = "";
+
+	root = find_path_device("/");
+	if (root)
+		model = get_property(root, "model", NULL);
+	seq_printf(m, "machine\t\t: CHRP %s\n", model);
+
+	/* longtrail (goldengate) stuff */
+	if (!strncmp(model, "IBM,LongTrail", 13)) {
+		/* VLSI VAS96011/12 `Golden Gate 2' */
+		/* Memory banks */
+		sdramen = (in_le32(gg2_pci_config_base + GG2_PCI_DRAM_CTRL)
+			   >>31) & 1;
+		for (i = 0; i < (sdramen ? 4 : 6); i++) {
+			t = in_le32(gg2_pci_config_base+
+						 GG2_PCI_DRAM_BANK0+
+						 i*4);
+			if (!(t & 1))
+				continue;
+			switch ((t>>8) & 0x1f) {
+			case 0x1f:
+				model = "4 MB";
+				break;
+			case 0x1e:
+				model = "8 MB";
+				break;
+			case 0x1c:
+				model = "16 MB";
+				break;
+			case 0x18:
+				model = "32 MB";
+				break;
+			case 0x10:
+				model = "64 MB";
+				break;
+			case 0x00:
+				model = "128 MB";
+				break;
+			default:
+				model = "Reserved";
+				break;
+			}
+			seq_printf(m, "memory bank %d\t: %s %s\n", i, model,
+				   gg2_memtypes[sdramen ? 1 : ((t>>1) & 3)]);
+		}
+		/* L2 cache */
+		t = in_le32(gg2_pci_config_base+GG2_PCI_CC_CTRL);
+		seq_printf(m, "board l2\t: %s %s (%s)\n",
+			   gg2_cachesizes[(t>>7) & 3],
+			   gg2_cachetypes[(t>>2) & 3],
+			   gg2_cachemodes[t & 3]);
+	}
+}
+
+/*
+ *  Fixes for the National Semiconductor PC78308VUL SuperI/O
+ *
+ *  Some versions of Open Firmware incorrectly initialize the IRQ settings
+ *  for keyboard and mouse
+ */
+static inline void __init sio_write(u8 val, u8 index)
+{
+	outb(index, 0x15c);
+	outb(val, 0x15d);
+}
+
+static inline u8 __init sio_read(u8 index)
+{
+	outb(index, 0x15c);
+	return inb(0x15d);
+}
+
+static void __init sio_fixup_irq(const char *name, u8 device, u8 level,
+				     u8 type)
+{
+	u8 level0, type0, active;
+
+	/* select logical device */
+	sio_write(device, 0x07);
+	active = sio_read(0x30);
+	level0 = sio_read(0x70);
+	type0 = sio_read(0x71);
+	if (level0 != level || type0 != type || !active) {
+		printk(KERN_WARNING "sio: %s irq level %d, type %d, %sactive: "
+		       "remapping to level %d, type %d, active\n",
+		       name, level0, type0, !active ? "in" : "", level, type);
+		sio_write(0x01, 0x30);
+		sio_write(level, 0x70);
+		sio_write(type, 0x71);
+	}
+}
+
+static void __init sio_init(void)
+{
+	struct device_node *root;
+
+	if ((root = find_path_device("/")) &&
+	    !strncmp(get_property(root, "model", NULL), "IBM,LongTrail", 13)) {
+		/* logical device 0 (KBC/Keyboard) */
+		sio_fixup_irq("keyboard", 0, 1, 2);
+		/* select logical device 1 (KBC/Mouse) */
+		sio_fixup_irq("mouse", 1, 12, 2);
+	}
+}
+
+
+static void __init pegasos_set_l2cr(void)
+{
+	struct device_node *np;
+
+	/* On Pegasos, enable the l2 cache if needed, as the OF forgets it */
+	if (_chrp_type != _CHRP_Pegasos)
+		return;
+
+	/* Enable L2 cache if needed */
+	np = find_type_devices("cpu");
+	if (np != NULL) {
+		unsigned int *l2cr = (unsigned int *)
+			get_property (np, "l2cr", NULL);
+		if (l2cr == NULL) {
+			printk ("Pegasos l2cr : no cpu l2cr property found\n");
+			return;
+		}
+		if (!((*l2cr) & 0x80000000)) {
+			printk ("Pegasos l2cr : L2 cache was not active, "
+				"activating\n");
+			_set_L2CR(0);
+			_set_L2CR((*l2cr) | 0x80000000);
+		}
+	}
+}
+
+void __init chrp_setup_arch(void)
+{
+	struct device_node *root = find_path_device ("/");
+	char *machine = NULL;
+	struct device_node *device;
+	unsigned int *p = NULL;
+
+	/* init to some ~sane value until calibrate_delay() runs */
+	loops_per_jiffy = 50000000/HZ;
+
+	if (root)
+		machine = get_property(root, "model", NULL);
+	if (machine && strncmp(machine, "Pegasos", 7) == 0) {
+		_chrp_type = _CHRP_Pegasos;
+	} else if (machine && strncmp(machine, "IBM", 3) == 0) {
+		_chrp_type = _CHRP_IBM;
+	} else if (machine && strncmp(machine, "MOT", 3) == 0) {
+		_chrp_type = _CHRP_Motorola;
+	} else {
+		/* Let's assume it is an IBM chrp if all else fails */
+		_chrp_type = _CHRP_IBM;
+	}
+	printk("chrp type = %x\n", _chrp_type);
+
+	rtas_initialize();
+	if (rtas_token("display-character") >= 0)
+		ppc_md.progress = rtas_progress;
+
+#ifdef CONFIG_BOOTX_TEXT
+	if (ppc_md.progress == NULL && boot_text_mapped)
+		ppc_md.progress = btext_progress;
+#endif
+
+#ifdef CONFIG_BLK_DEV_INITRD
+	/* this is fine for chrp */
+	initrd_below_start_ok = 1;
+
+	if (initrd_start)
+		ROOT_DEV = Root_RAM0;
+	else
+#endif
+		ROOT_DEV = Root_SDA2; /* sda2 (sda1 is for the kernel) */
+
+	/* On pegasos, enable the L2 cache if not already done by OF */
+	pegasos_set_l2cr();
+
+	/* Lookup PCI host bridges */
+	chrp_find_bridges();
+
+	/*
+	 *  Temporary fixes for PCI devices.
+	 *  -- Geert
+	 */
+	hydra_init();		/* Mac I/O */
+
+	/*
+	 *  Fix the Super I/O configuration
+	 */
+	sio_init();
+
+	/* Get the event scan rate for the rtas so we know how
+	 * often it expects a heartbeat. -- Cort
+	 */
+	device = find_devices("rtas");
+	if (device)
+		p = (unsigned int *) get_property
+			(device, "rtas-event-scan-rate", NULL);
+	if (p && *p) {
+		ppc_md.heartbeat = chrp_event_scan;
+		ppc_md.heartbeat_reset = HZ / (*p * 30) - 1;
+		ppc_md.heartbeat_count = 1;
+		printk("RTAS Event Scan Rate: %u (%lu jiffies)\n",
+		       *p, ppc_md.heartbeat_reset);
+	}
+
+	pci_create_OF_bus_map();
+
+	/*
+	 * Print the banner, then scroll down so boot progress
+	 * can be printed.  -- Cort
+	 */
+	if (ppc_md.progress) ppc_md.progress("Linux/PPC "UTS_RELEASE"\n", 0x0);
+}
+
+void
+chrp_event_scan(void)
+{
+	unsigned char log[1024];
+	int ret = 0;
+
+	/* XXX: we should loop until the hardware says no more error logs -- Cort */
+	rtas_call(rtas_token("event-scan"), 4, 1, &ret, 0xffffffff, 0,
+		  __pa(log), 1024);
+	ppc_md.heartbeat_count = ppc_md.heartbeat_reset;
+}
+
+/*
+ * Finds the open-pic node and sets up the mpic driver.
+ */
+static void __init chrp_find_openpic(void)
+{
+	struct device_node *np, *root;
+	int len, i, j, irq_count;
+	int isu_size, idu_size;
+	unsigned int *iranges, *opprop = NULL;
+	int oplen = 0;
+	unsigned long opaddr;
+	int na = 1;
+	unsigned char init_senses[NR_IRQS - NUM_8259_INTERRUPTS];
+
+	np = find_type_devices("open-pic");
+	if (np == NULL)
+		return;
+	root = find_path_device("/");
+	if (root) {
+		opprop = (unsigned int *) get_property
+			(root, "platform-open-pic", &oplen);
+		na = prom_n_addr_cells(root);
+	}
+	if (opprop && oplen >= na * sizeof(unsigned int)) {
+		opaddr = opprop[na-1];	/* assume 32-bit */
+		oplen /= na * sizeof(unsigned int);
+	} else {
+		if (np->n_addrs == 0)
+			return;
+		opaddr = np->addrs[0].address;
+		oplen = 0;
+	}
+
+	printk(KERN_INFO "OpenPIC at %lx\n", opaddr);
+
+	irq_count = NR_IRQS - NUM_ISA_INTERRUPTS - 4; /* leave room for IPIs */
+	prom_get_irq_senses(init_senses, NUM_8259_INTERRUPTS, NR_IRQS - 4);
+
+	iranges = (unsigned int *) get_property(np, "interrupt-ranges", &len);
+	if (iranges == NULL)
+		len = 0;	/* non-distributed mpic */
+	else
+		len /= 2 * sizeof(unsigned int);
+
+	/*
+	 * The first pair of cells in interrupt-ranges refers to the
+	 * IDU; subsequent pairs refer to the ISUs.
+	 */
+	if (oplen < len) {
+		printk(KERN_ERR "Insufficient addresses for distributed"
+		       " OpenPIC (%d < %d)\n", np->n_addrs, len);
+		len = oplen;
+	}
+
+	isu_size = 0;
+	idu_size = 0;
+	if (len > 0 && iranges[1] != 0) {
+		printk(KERN_INFO "OpenPIC irqs %d..%d in IDU\n",
+		       iranges[0], iranges[0] + iranges[1] - 1);
+		idu_size = iranges[1];
+	}
+	if (len > 1)
+		isu_size = iranges[3];
+
+	chrp_mpic = mpic_alloc(opaddr, MPIC_PRIMARY,
+			       isu_size, NUM_ISA_INTERRUPTS, irq_count,
+			       NR_IRQS - 4, init_senses, irq_count,
+			       " MPIC    ");
+	if (chrp_mpic == NULL) {
+		printk(KERN_ERR "Failed to allocate MPIC structure\n");
+		return;
+	}
+
+	j = na - 1;
+	for (i = 1; i < len; ++i) {
+		iranges += 2;
+		j += na;
+		printk(KERN_INFO "OpenPIC irqs %d..%d in ISU at %x\n",
+		       iranges[0], iranges[0] + iranges[1] - 1,
+		       opprop[j]);
+		mpic_assign_isu(chrp_mpic, i - 1, opprop[j]);
+	}
+
+	mpic_init(chrp_mpic);
+	mpic_setup_cascade(NUM_ISA_INTERRUPTS, i8259_irq_cascade, NULL);
+}
+
+#if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(XMON)
+static struct irqaction xmon_irqaction = {
+	.handler = xmon_irq,
+	.mask = CPU_MASK_NONE,
+	.name = "XMON break",
+};
+#endif
+
+void __init chrp_init_IRQ(void)
+{
+	struct device_node *np;
+	unsigned long chrp_int_ack = 0;
+#if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(XMON)
+	struct device_node *kbd;
+#endif
+
+	for (np = find_devices("pci"); np != NULL; np = np->next) {
+		unsigned int *addrp = (unsigned int *)
+			get_property(np, "8259-interrupt-acknowledge", NULL);
+
+		if (addrp == NULL)
+			continue;
+		chrp_int_ack = addrp[prom_n_addr_cells(np)-1];
+		break;
+	}
+	if (np == NULL)
+		printk(KERN_ERR "Cannot find PCI interrupt acknowledge address\n");
+
+	chrp_find_openpic();
+
+	i8259_init(chrp_int_ack, 0);
+
+	if (_chrp_type == _CHRP_Pegasos)
+		ppc_md.get_irq        = i8259_irq;
+	else
+		ppc_md.get_irq        = mpic_get_irq;
+
+#if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(XMON)
+	/* see if there is a keyboard in the device tree
+	   with a parent of type "adb" */
+	for (kbd = find_devices("keyboard"); kbd; kbd = kbd->next)
+		if (kbd->parent && kbd->parent->type
+		    && strcmp(kbd->parent->type, "adb") == 0)
+			break;
+	if (kbd)
+		setup_irq(HYDRA_INT_ADB_NMI, &xmon_irqaction);
+#endif
+}
+
+void __init
+chrp_init2(void)
+{
+	request_region(0x20,0x20,"pic1");
+	request_region(0xa0,0x20,"pic2");
+	request_region(0x00,0x20,"dma1");
+	request_region(0x40,0x20,"timer");
+	request_region(0x80,0x10,"dma page reg");
+	request_region(0xc0,0x20,"dma2");
+
+	if (ppc_md.progress)
+		ppc_md.progress("  Have fun!    ", 0x7777);
+}
+
+void __init chrp_init(void)
+{
+	ISA_DMA_THRESHOLD = ~0L;
+	DMA_MODE_READ = 0x44;
+	DMA_MODE_WRITE = 0x48;
+	isa_io_base = CHRP_ISA_IO_BASE;		/* default value */
+	ppc_do_canonicalize_irqs = 1;
+
+	/* Assume we have an 8259... */
+	__irq_offset_value = NUM_ISA_INTERRUPTS;
+
+	ppc_md.setup_arch     = chrp_setup_arch;
+	ppc_md.show_cpuinfo   = chrp_show_cpuinfo;
+
+	ppc_md.init_IRQ       = chrp_init_IRQ;
+	ppc_md.init           = chrp_init2;
+
+	ppc_md.phys_mem_access_prot = pci_phys_mem_access_prot;
+
+	ppc_md.restart        = rtas_restart;
+	ppc_md.power_off      = rtas_power_off;
+	ppc_md.halt           = rtas_halt;
+
+	ppc_md.time_init      = chrp_time_init;
+	ppc_md.set_rtc_time   = chrp_set_rtc_time;
+	ppc_md.get_rtc_time   = chrp_get_rtc_time;
+	ppc_md.calibrate_decr = chrp_calibrate_decr;
+
+#ifdef CONFIG_SMP
+	smp_ops = &chrp_smp_ops;
+#endif /* CONFIG_SMP */
+}
+
+#ifdef CONFIG_BOOTX_TEXT
+void
+btext_progress(char *s, unsigned short hex)
+{
+	btext_drawstring(s);
+	btext_drawstring("\n");
+}
+#endif /* CONFIG_BOOTX_TEXT */