[POWERPC] Make pci_read_irq_line the default on mpc7448hpc2 board

The following patch adds a tsi108/9 pci interrupt controller host.
On mpc7448hpc2 board, pci_irq_fixup function is removed, which makes the
pci_read_irq_line be the default pci irq fixup.

Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

1 files changed, 23 insertions, 65 deletions

diff --git a/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c
index c6113c39009..3fcc85f60fb 100644
--- a/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c
+++ b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c
@@ -60,7 +60,7 @@ pci_dram_offset = MPC7448_HPC2_PCI_MEM_OFFSET;
 
 extern int tsi108_setup_pci(struct device_node *dev);
 extern void _nmask_and_or_msr(unsigned long nmask, unsigned long or_val);
-extern void tsi108_pci_int_init(void);
+extern void tsi108_pci_int_init(struct device_node *node);
 extern void tsi108_irq_cascade(unsigned int irq, struct irq_desc *desc);
 
 int mpc7448_hpc2_exclude_device(u_char bus, u_char devfn)
@@ -71,59 +71,6 @@ int mpc7448_hpc2_exclude_device(u_char bus, u_char devfn)
 		return PCIBIOS_SUCCESSFUL;
 }
 
-/*
- * find pci slot by devfn in interrupt map of OF tree
- */
-u8 find_slot_by_devfn(unsigned int *interrupt_map, unsigned int devfn)
-{
-	int i;
-	unsigned int tmp;
-	for (i = 0; i < 4; i++){
-		tmp = interrupt_map[i*4*7];
-		if ((tmp >> 11) == (devfn >> 3))
-			return i;
-	}
-	return i;
-}
-
-/*
- * Scans the interrupt map for pci device
- */
-void __devinit mpc7448_hpc2_fixup_irq(struct pci_dev *dev)
-{
-	struct pci_controller *hose;
-	struct device_node *node;
-	const unsigned int *interrupt;
-	int busnr;
-	int len;
-	u8 slot;
-	u8 pin;
-
-	/* Lookup the hose */
-	busnr = dev->bus->number;
-	hose = pci_bus_to_hose(busnr);
-	if (!hose)
-		printk(KERN_ERR "No pci hose found\n");
-
-	/* Check it has an OF node associated */
-	node = (struct device_node *) hose->arch_data;
-	if (!node)
-		printk(KERN_ERR "No pci node found\n");
-
-	interrupt = get_property(node, "interrupt-map", &len);
-	slot = find_slot_by_devfn(interrupt, dev->devfn);
-	pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
-	if (pin == 0 || pin > 4)
-		pin = 1;
-	pin--;
-	dev->irq  = interrupt[slot*4*7 + pin*7 + 5];
-
-	pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
-
-	DBG("TSI_PCI: dev->irq = 0x%x\n", dev->irq);
-}
-/* temporary pci irq map fixup*/
-
 static void __init mpc7448_hpc2_setup_arch(void)
 {
 	struct device_node *cpu;
@@ -186,9 +133,12 @@ static void __init mpc7448_hpc2_init_IRQ(void)
 {
 	struct mpic *mpic;
 	phys_addr_t mpic_paddr = 0;
+	struct device_node *tsi_pic;
+#ifdef CONFIG_PCI
 	unsigned int cascade_pci_irq;
 	struct device_node *tsi_pci;
-	struct device_node *tsi_pic;
+	struct device_node *cascade_node = NULL;
+#endif
 
 	tsi_pic = of_find_node_by_type(NULL, "open-pic");
 	if (tsi_pic) {
@@ -202,31 +152,41 @@ static void __init mpc7448_hpc2_init_IRQ(void)
 		return;
 	}
 
-	DBG("%s: tsi108pic phys_addr = 0x%x\n", __FUNCTION__,
+	DBG("%s: tsi108 pic phys_addr = 0x%x\n", __FUNCTION__,
 	    (u32) mpic_paddr);
 
 	mpic = mpic_alloc(tsi_pic, mpic_paddr,
 			MPIC_PRIMARY | MPIC_BIG_ENDIAN | MPIC_WANTS_RESET |
 			MPIC_SPV_EOI | MPIC_NO_PTHROU_DIS | MPIC_REGSET_TSI108,
-			0, /* num_sources used */
-			0, /* num_sources used */
+			24,
+			NR_IRQS-4, /* num_sources used */
 			"Tsi108_PIC");
 
-	BUG_ON(mpic == NULL); /* XXXX */
+	BUG_ON(mpic == NULL);
+
+	mpic_assign_isu(mpic, 0, mpic_paddr + 0x100);
+
 	mpic_init(mpic);
 
+#ifdef CONFIG_PCI
 	tsi_pci = of_find_node_by_type(NULL, "pci");
-	if (tsi_pci == 0) {
+	if (tsi_pci == NULL) {
 		printk("%s: No tsi108 pci node found !\n", __FUNCTION__);
 		return;
 	}
+	cascade_node = of_find_node_by_type(NULL, "pic-router");
+	if (cascade_node == NULL) {
+		printk("%s: No tsi108 pci cascade node found !\n", __FUNCTION__);
+		return;
+	}
 
 	cascade_pci_irq = irq_of_parse_and_map(tsi_pci, 0);
+	DBG("%s: tsi108 cascade_pci_irq = 0x%x\n", __FUNCTION__,
+	    (u32) cascade_pci_irq);
+	tsi108_pci_int_init(cascade_node);
 	set_irq_data(cascade_pci_irq, mpic);
 	set_irq_chained_handler(cascade_pci_irq, tsi108_irq_cascade);
-
-	tsi108_pci_int_init();
-
+#endif
 	/* Configure MPIC outputs to CPU0 */
 	tsi108_write_reg(TSI108_MPIC_OFFSET + 0x30c, 0);
 	of_node_put(tsi_pic);
@@ -284,7 +244,6 @@ static int mpc7448_machine_check_exception(struct pt_regs *regs)
 		return 1;
 	}
 	return 0;
-
 }
 
 define_machine(mpc7448_hpc2){
@@ -294,7 +253,6 @@ define_machine(mpc7448_hpc2){
 	.init_IRQ 		= mpc7448_hpc2_init_IRQ,
 	.show_cpuinfo 		= mpc7448_hpc2_show_cpuinfo,
 	.get_irq 		= mpic_get_irq,
-	.pci_irq_fixup 		= mpc7448_hpc2_fixup_irq,
 	.restart 		= mpc7448_hpc2_restart,
 	.calibrate_decr 	= generic_calibrate_decr,
 	.machine_check_exception= mpc7448_machine_check_exception,