Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux

Pull more powerpc updates from Michael Ellerman:
 "Here's some more updates for powerpc for 3.18.

  They are a bit late I know, though must are actually bug fixes.  In my
  defence I nearly cut the top of my finger off last weekend in a
  gruesome bike maintenance accident, so I spent a good part of the week
  waiting around for doctors.  True story, I can send photos if you like :)

  Probably the most interesting fix is the sys_call_table one, which
  enables syscall tracing for powerpc.  There's a fix for HMI handling
  for old firmware, more endian fixes for firmware interfaces, more EEH
  fixes, Anton fixed our routine that gets the current stack pointer,
  and a few other misc bits"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: (22 commits)
  powerpc: Only do dynamic DMA zone limits on platforms that need it
  powerpc: sync pseries_le_defconfig with pseries_defconfig
  powerpc: Add printk levels to setup_system output
  powerpc/vphn: NUMA node code expects big-endian
  powerpc/msi: Use WARN_ON() in msi bitmap selftests
  powerpc/msi: Fix the msi bitmap alignment tests
  powerpc/eeh: Block CFG upon frozen Shiner adapter
  powerpc/eeh: Don't collect logs on PE with blocked config space
  powerpc/eeh: Block PCI config access upon frozen PE
  powerpc/pseries: Drop config requests in EEH accessors
  powerpc/powernv: Drop config requests in EEH accessors
  powerpc/eeh: Rename flag EEH_PE_RESET to EEH_PE_CFG_BLOCKED
  powerpc/eeh: Fix condition for isolated state
  powerpc/pseries: Make CPU hotplug path endian safe
  powerpc/pseries: Use dump_stack instead of show_stack
  powerpc: Rename __get_SP() to current_stack_pointer()
  powerpc: Reimplement __get_SP() as a function not a define
  powerpc/numa: Add ability to disable and debug topology updates
  powerpc/numa: check error return from proc_create
  powerpc/powernv: Fallback to old HMI handling behavior for old firmware
  ...

4 files changed, 78 insertions, 4 deletions

diff --git a/arch/powerpc/platforms/powernv/eeh-ioda.c b/arch/powerpc/platforms/powernv/eeh-ioda.c
index 426814a2ede..eba9cb10619 100644
--- a/arch/powerpc/platforms/powernv/eeh-ioda.c
+++ b/arch/powerpc/platforms/powernv/eeh-ioda.c
@@ -373,7 +373,7 @@ static int ioda_eeh_get_pe_state(struct eeh_pe *pe)
 	 * moving forward, we have to return operational
 	 * state during PE reset.
 	 */
-	if (pe->state & EEH_PE_RESET) {
+	if (pe->state & EEH_PE_CFG_BLOCKED) {
 		result = (EEH_STATE_MMIO_ACTIVE  |
 			  EEH_STATE_DMA_ACTIVE   |
 			  EEH_STATE_MMIO_ENABLED |
diff --git a/arch/powerpc/platforms/powernv/eeh-powernv.c b/arch/powerpc/platforms/powernv/eeh-powernv.c
index 3e89cbf5588..1d19e7917d7 100644
--- a/arch/powerpc/platforms/powernv/eeh-powernv.c
+++ b/arch/powerpc/platforms/powernv/eeh-powernv.c
@@ -169,6 +169,26 @@ static int powernv_eeh_dev_probe(struct pci_dev *dev, void *flag)
 	}
 
 	/*
+	 * If the PE contains any one of following adapters, the
+	 * PCI config space can't be accessed when dumping EEH log.
+	 * Otherwise, we will run into fenced PHB caused by shortage
+	 * of outbound credits in the adapter. The PCI config access
+	 * should be blocked until PE reset. MMIO access is dropped
+	 * by hardware certainly. In order to drop PCI config requests,
+	 * one more flag (EEH_PE_CFG_RESTRICTED) is introduced, which
+	 * will be checked in the backend for PE state retrival. If
+	 * the PE becomes frozen for the first time and the flag has
+	 * been set for the PE, we will set EEH_PE_CFG_BLOCKED for
+	 * that PE to block its config space.
+	 *
+	 * Broadcom Austin 4-ports NICs (14e4:1657)
+	 * Broadcom Shiner 2-ports 10G NICs (14e4:168e)
+	 */
+	if ((dev->vendor == PCI_VENDOR_ID_BROADCOM && dev->device == 0x1657) ||
+	    (dev->vendor == PCI_VENDOR_ID_BROADCOM && dev->device == 0x168e))
+		edev->pe->state |= EEH_PE_CFG_RESTRICTED;
+
+	/*
 	 * Cache the PE primary bus, which can't be fetched when
 	 * full hotplug is in progress. In that case, all child
 	 * PCI devices of the PE are expected to be removed prior
@@ -383,6 +403,39 @@ static int powernv_eeh_err_inject(struct eeh_pe *pe, int type, int func,
 	return ret;
 }
 
+static inline bool powernv_eeh_cfg_blocked(struct device_node *dn)
+{
+	struct eeh_dev *edev = of_node_to_eeh_dev(dn);
+
+	if (!edev || !edev->pe)
+		return false;
+
+	if (edev->pe->state & EEH_PE_CFG_BLOCKED)
+		return true;
+
+	return false;
+}
+
+static int powernv_eeh_read_config(struct device_node *dn,
+				   int where, int size, u32 *val)
+{
+	if (powernv_eeh_cfg_blocked(dn)) {
+		*val = 0xFFFFFFFF;
+		return PCIBIOS_SET_FAILED;
+	}
+
+	return pnv_pci_cfg_read(dn, where, size, val);
+}
+
+static int powernv_eeh_write_config(struct device_node *dn,
+				    int where, int size, u32 val)
+{
+	if (powernv_eeh_cfg_blocked(dn))
+		return PCIBIOS_SET_FAILED;
+
+	return pnv_pci_cfg_write(dn, where, size, val);
+}
+
 /**
  * powernv_eeh_next_error - Retrieve next EEH error to handle
  * @pe: Affected PE
@@ -440,8 +493,8 @@ static struct eeh_ops powernv_eeh_ops = {
 	.get_log                = powernv_eeh_get_log,
 	.configure_bridge       = powernv_eeh_configure_bridge,
 	.err_inject		= powernv_eeh_err_inject,
-	.read_config            = pnv_pci_cfg_read,
-	.write_config           = pnv_pci_cfg_write,
+	.read_config            = powernv_eeh_read_config,
+	.write_config           = powernv_eeh_write_config,
 	.next_error		= powernv_eeh_next_error,
 	.restore_config		= powernv_eeh_restore_config
 };
diff --git a/arch/powerpc/platforms/powernv/opal.c b/arch/powerpc/platforms/powernv/opal.c
index b642b0562f5..d019b081df9 100644
--- a/arch/powerpc/platforms/powernv/opal.c
+++ b/arch/powerpc/platforms/powernv/opal.c
@@ -194,6 +194,27 @@ static int __init opal_register_exception_handlers(void)
 	 * fwnmi area at 0x7000 to provide the glue space to OPAL
 	 */
 	glue = 0x7000;
+
+	/*
+	 * Check if we are running on newer firmware that exports
+	 * OPAL_HANDLE_HMI token. If yes, then don't ask OPAL to patch
+	 * the HMI interrupt and we catch it directly in Linux.
+	 *
+	 * For older firmware (i.e currently released POWER8 System Firmware
+	 * as of today <= SV810_087), we fallback to old behavior and let OPAL
+	 * patch the HMI vector and handle it inside OPAL firmware.
+	 *
+	 * For newer firmware (in development/yet to be released) we will
+	 * start catching/handling HMI directly in Linux.
+	 */
+	if (!opal_check_token(OPAL_HANDLE_HMI)) {
+		pr_info("opal: Old firmware detected, OPAL handles HMIs.\n");
+		opal_register_exception_handler(
+				OPAL_HYPERVISOR_MAINTENANCE_HANDLER,
+				0, glue);
+		glue += 128;
+	}
+
 	opal_register_exception_handler(OPAL_SOFTPATCH_HANDLER, 0, glue);
 #endif
 
diff --git a/arch/powerpc/platforms/powernv/pci.c b/arch/powerpc/platforms/powernv/pci.c
index b3ca77ddf36..b2187d0068b 100644
--- a/arch/powerpc/platforms/powernv/pci.c
+++ b/arch/powerpc/platforms/powernv/pci.c
@@ -505,7 +505,7 @@ static bool pnv_pci_cfg_check(struct pci_controller *hose,
 	edev = of_node_to_eeh_dev(dn);
 	if (edev) {
 		if (edev->pe &&
-		    (edev->pe->state & EEH_PE_RESET))
+		    (edev->pe->state & EEH_PE_CFG_BLOCKED))
 			return false;
 
 		if (edev->mode & EEH_DEV_REMOVED)