powerpc/pseries: Use jump labels for hcall tracepoints

hcall tracepoints add quite a few instructions to our hcall path:

plpar_hcall:
	mr      r2,r2
	mfcr    r0
	stw     r0,8(r1)
	b       164		<---- start
	ld      r12,0(r2)
	std     r12,32(r1)
	cmpdi   r12,0
	beq     164		<---- end
...

We have an unconditional branch that gets noped out during boot and
a load/compare/branch. We also store the tracepoint value to the
stack for the hcall_exit path to use.

By using jump labels we can simplify this to just a single nop that
gets replaced with a branch when the tracepoint is enabled:

plpar_hcall:
	mr      r2,r2
	mfcr    r0
	stw     r0,8(r1)
	nop			<----
...

If jump labels are not enabled, we fall back to the old method.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

1 files changed, 110 insertions, 34 deletions

diff --git a/arch/powerpc/platforms/pseries/hvCall.S b/arch/powerpc/platforms/pseries/hvCall.S
index 99ecf0a5a92..2f51abf6afa 100644
--- a/arch/powerpc/platforms/pseries/hvCall.S
+++ b/arch/powerpc/platforms/pseries/hvCall.S
@@ -12,9 +12,13 @@
 #include <asm/ppc_asm.h>
 #include <asm/asm-offsets.h>
 #include <asm/ptrace.h>
+#include <asm/jump_label.h>
+
+	.section	".text"
 	
 #ifdef CONFIG_TRACEPOINTS
 
+#ifndef CONFIG_JUMP_LABEL
 	.section	".toc","aw"
 
 	.globl hcall_tracepoint_refcount
@@ -22,21 +26,13 @@ hcall_tracepoint_refcount:
 	.llong	0
 
 	.section	".text"
+#endif
 
 /*
  * precall must preserve all registers.  use unused STK_PARAM()
- * areas to save snapshots and opcode. We branch around this
- * in early init (eg when populating the MMU hashtable) by using an
- * unconditional cpu feature.
+ * areas to save snapshots and opcode.
  */
 #define HCALL_INST_PRECALL(FIRST_REG)				\
-BEGIN_FTR_SECTION;						\
-	b	1f;						\
-END_FTR_SECTION(0, 1);						\
-	ld      r12,hcall_tracepoint_refcount@toc(r2);		\
-	std	r12,32(r1);					\
-	cmpdi	r12,0;						\
-	beq+	1f;						\
 	mflr	r0;						\
 	std	r3,STK_PARAM(R3)(r1);				\
 	std	r4,STK_PARAM(R4)(r1);				\
@@ -60,22 +56,13 @@ END_FTR_SECTION(0, 1);						\
 	ld	r8,STK_PARAM(R8)(r1);				\
 	ld	r9,STK_PARAM(R9)(r1);				\
 	ld	r10,STK_PARAM(R10)(r1);				\
-	mtlr	r0;						\
-1:
+	mtlr	r0
 
 /*
  * postcall is performed immediately before function return which
- * allows liberal use of volatile registers.  We branch around this
- * in early init (eg when populating the MMU hashtable) by using an
- * unconditional cpu feature.
+ * allows liberal use of volatile registers.
  */
 #define __HCALL_INST_POSTCALL					\
-BEGIN_FTR_SECTION;						\
-	b	1f;						\
-END_FTR_SECTION(0, 1);						\
-	ld      r12,32(r1);					\
-	cmpdi	r12,0;						\
-	beq+	1f;						\
 	mflr	r0;						\
 	ld	r6,STK_PARAM(R3)(r1);				\
 	std	r3,STK_PARAM(R3)(r1);				\
@@ -87,8 +74,7 @@ END_FTR_SECTION(0, 1);						\
 	addi	r1,r1,STACK_FRAME_OVERHEAD;			\
 	ld	r0,16(r1);					\
 	ld	r3,STK_PARAM(R3)(r1);				\
-	mtlr	r0;						\
-1:
+	mtlr	r0
 
 #define HCALL_INST_POSTCALL_NORETS				\
 	li	r5,0;						\
@@ -98,37 +84,62 @@ END_FTR_SECTION(0, 1);						\
 	mr	r5,BUFREG;					\
 	__HCALL_INST_POSTCALL
 
+#ifdef CONFIG_JUMP_LABEL
+#define HCALL_BRANCH(LABEL)					\
+	ARCH_STATIC_BRANCH(LABEL, hcall_tracepoint_key)
+#else
+
+/*
+ * We branch around this in early init (eg when populating the MMU
+ * hashtable) by using an unconditional cpu feature.
+ */
+#define HCALL_BRANCH(LABEL)					\
+BEGIN_FTR_SECTION;						\
+	b	1f;						\
+END_FTR_SECTION(0, 1);						\
+	ld	r12,hcall_tracepoint_refcount@toc(r2);		\
+	std	r12,32(r1);					\
+	cmpdi	r12,0;						\
+	bne-	LABEL;						\
+1:
+#endif
+
 #else
 #define HCALL_INST_PRECALL(FIRST_ARG)
 #define HCALL_INST_POSTCALL_NORETS
 #define HCALL_INST_POSTCALL(BUFREG)
+#define HCALL_BRANCH(LABEL)
 #endif
 
-	.text
-
 _GLOBAL_TOC(plpar_hcall_norets)
 	HMT_MEDIUM
 
 	mfcr	r0
 	stw	r0,8(r1)
-
-	HCALL_INST_PRECALL(R4)
-
+	HCALL_BRANCH(plpar_hcall_norets_trace)
 	HVSC				/* invoke the hypervisor */
 
-	HCALL_INST_POSTCALL_NORETS
-
 	lwz	r0,8(r1)
 	mtcrf	0xff,r0
 	blr				/* return r3 = status */
 
+#ifdef CONFIG_TRACEPOINTS
+plpar_hcall_norets_trace:
+	HCALL_INST_PRECALL(R4)
+	HVSC
+	HCALL_INST_POSTCALL_NORETS
+	lwz	r0,8(r1)
+	mtcrf	0xff,r0
+	blr
+#endif
+
 _GLOBAL_TOC(plpar_hcall)
 	HMT_MEDIUM
 
 	mfcr	r0
 	stw	r0,8(r1)
 
-	HCALL_INST_PRECALL(R5)
+	HCALL_BRANCH(plpar_hcall_trace)
 
 	std     r4,STK_PARAM(R4)(r1)     /* Save ret buffer */
 
@@ -147,12 +158,40 @@ _GLOBAL_TOC(plpar_hcall)
 	std	r6, 16(r12)
 	std	r7, 24(r12)
 
+	lwz	r0,8(r1)
+	mtcrf	0xff,r0
+
+	blr				/* return r3 = status */
+
+#ifdef CONFIG_TRACEPOINTS
+plpar_hcall_trace:
+	HCALL_INST_PRECALL(R5)
+
+	std	r4,STK_PARAM(R4)(r1)
+	mr	r0,r4
+
+	mr	r4,r5
+	mr	r5,r6
+	mr	r6,r7
+	mr	r7,r8
+	mr	r8,r9
+	mr	r9,r10
+
+	HVSC
+
+	ld	r12,STK_PARAM(R4)(r1)
+	std	r4,0(r12)
+	std	r5,8(r12)
+	std	r6,16(r12)
+	std	r7,24(r12)
+
 	HCALL_INST_POSTCALL(r12)
 
 	lwz	r0,8(r1)
 	mtcrf	0xff,r0
 
-	blr				/* return r3 = status */
+	blr
+#endif
 
 /*
  * plpar_hcall_raw can be called in real mode. kexec/kdump need some
@@ -194,7 +233,7 @@ _GLOBAL_TOC(plpar_hcall9)
 	mfcr	r0
 	stw	r0,8(r1)
 
-	HCALL_INST_PRECALL(R5)
+	HCALL_BRANCH(plpar_hcall9_trace)
 
 	std     r4,STK_PARAM(R4)(r1)     /* Save ret buffer */
 
@@ -222,12 +261,49 @@ _GLOBAL_TOC(plpar_hcall9)
 	std	r11,56(r12)
 	std	r0, 64(r12)
 
+	lwz	r0,8(r1)
+	mtcrf	0xff,r0
+
+	blr				/* return r3 = status */
+
+#ifdef CONFIG_TRACEPOINTS
+plpar_hcall9_trace:
+	HCALL_INST_PRECALL(R5)
+
+	std	r4,STK_PARAM(R4)(r1)
+	mr	r0,r4
+
+	mr	r4,r5
+	mr	r5,r6
+	mr	r6,r7
+	mr	r7,r8
+	mr	r8,r9
+	mr	r9,r10
+	ld	r10,STK_PARAM(R11)(r1)
+	ld	r11,STK_PARAM(R12)(r1)
+	ld	r12,STK_PARAM(R13)(r1)
+
+	HVSC
+
+	mr	r0,r12
+	ld	r12,STK_PARAM(R4)(r1)
+	std	r4,0(r12)
+	std	r5,8(r12)
+	std	r6,16(r12)
+	std	r7,24(r12)
+	std	r8,32(r12)
+	std	r9,40(r12)
+	std	r10,48(r12)
+	std	r11,56(r12)
+	std	r0,64(r12)
+
 	HCALL_INST_POSTCALL(r12)
 
 	lwz	r0,8(r1)
 	mtcrf	0xff,r0
 
-	blr				/* return r3 = status */
+	blr
+#endif
 
 /* See plpar_hcall_raw to see why this is needed */
 _GLOBAL(plpar_hcall9_raw)