powerpc: fix linkstation and storcenter compilation breakage

Defining flash partition table in platform code is deprecated, and due to
recent changes linkstation and storcenter do not compile any more with
their default configurations because of undefined references to
physmap_set_partitions(). Instead of fixing them by using the correct
kernel configuration macro in preprocessor conditional, remove partition
table definitions altogether. Instead add support for partition definition
on the command-line and in device tree to the default configurations.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

2 files changed, 0 insertions, 70 deletions

diff --git a/arch/powerpc/platforms/embedded6xx/linkstation.c b/arch/powerpc/platforms/embedded6xx/linkstation.c
index 2ca7be65c2d..244f997de79 100644
--- a/arch/powerpc/platforms/embedded6xx/linkstation.c
+++ b/arch/powerpc/platforms/embedded6xx/linkstation.c
@@ -12,7 +12,6 @@
 
 #include <linux/kernel.h>
 #include <linux/initrd.h>
-#include <linux/mtd/physmap.h>
 #include <linux/of_platform.h>
 
 #include <asm/time.h>
@@ -22,39 +21,6 @@
 
 #include "mpc10x.h"
 
-static struct mtd_partition linkstation_physmap_partitions[] = {
-	{
-		.name   = "mtd_firmimg",
-		.offset = 0x000000,
-		.size   = 0x300000,
-	},
-	{
-		.name   = "mtd_bootcode",
-		.offset = 0x300000,
-		.size   = 0x070000,
-	},
-	{
-		.name   = "mtd_status",
-		.offset = 0x370000,
-		.size   = 0x010000,
-	},
-	{
-		.name   = "mtd_conf",
-		.offset = 0x380000,
-		.size   = 0x080000,
-	},
-	{
-		.name   = "mtd_allflash",
-		.offset = 0x000000,
-		.size   = 0x400000,
-	},
-	{
-		.name   = "mtd_data",
-		.offset = 0x310000,
-		.size   = 0x0f0000,
-	},
-};
-
 static __initdata struct of_device_id of_bus_ids[] = {
 	{ .type = "soc", },
 	{ .compatible = "simple-bus", },
@@ -99,10 +65,6 @@ static int __init linkstation_add_bridge(struct device_node *dev)
 static void __init linkstation_setup_arch(void)
 {
 	struct device_node *np;
-#ifdef CONFIG_MTD_PHYSMAP
-	physmap_set_partitions(linkstation_physmap_partitions,
-			       ARRAY_SIZE(linkstation_physmap_partitions));
-#endif
 
 	/* Lookup PCI host bridges */
 	for_each_compatible_node(np, "pci", "mpc10x-pci")
diff --git a/arch/powerpc/platforms/embedded6xx/storcenter.c b/arch/powerpc/platforms/embedded6xx/storcenter.c
index 8864e488498..613070e9ddb 100644
--- a/arch/powerpc/platforms/embedded6xx/storcenter.c
+++ b/arch/powerpc/platforms/embedded6xx/storcenter.c
@@ -14,7 +14,6 @@
 #include <linux/kernel.h>
 #include <linux/pci.h>
 #include <linux/initrd.h>
-#include <linux/mtd/physmap.h>
 #include <linux/of_platform.h>
 
 #include <asm/system.h>
@@ -26,32 +25,6 @@
 #include "mpc10x.h"
 
 
-#ifdef CONFIG_MTD_PHYSMAP
-static struct mtd_partition storcenter_physmap_partitions[] = {
-	{
-		.name   = "kernel",
-		.offset = 0x000000,
-		.size   = 0x170000,
-	},
-	{
-		.name   = "rootfs",
-		.offset = 0x170000,
-		.size   = 0x590000,
-	},
-	{
-		.name   = "uboot",
-		.offset = 0x700000,
-		.size   = 0x040000,
-	},
-	{
-		.name   = "config",
-		.offset = 0x740000,
-		.size   = 0x0c0000,
-	},
-};
-#endif
-
-
 static __initdata struct of_device_id storcenter_of_bus[] = {
 	{ .name = "soc", },
 	{},
@@ -96,11 +69,6 @@ static void __init storcenter_setup_arch(void)
 {
 	struct device_node *np;
 
-#ifdef CONFIG_MTD_PHYSMAP
-	physmap_set_partitions(storcenter_physmap_partitions,
-			       ARRAY_SIZE(storcenter_physmap_partitions));
-#endif
-
 	/* Lookup PCI host bridges */
 	for_each_compatible_node(np, "pci", "mpc10x-pci")
 		storcenter_add_bridge(np);