Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (185 commits)
  powerpc: fix compile error with 85xx/p1010rdb.c
  powerpc: fix compile error with 85xx/p1023_rds.c
  powerpc/fsl: add MSI support for the Freescale hypervisor
  arch/powerpc/sysdev/fsl_rmu.c: introduce missing kfree
  powerpc/fsl: Add support for Integrated Flash Controller
  powerpc/fsl: update compatiable on fsl 16550 uart nodes
  powerpc/85xx: fix PCI and localbus properties in p1022ds.dts
  powerpc/85xx: re-enable ePAPR byte channel driver in corenet32_smp_defconfig
  powerpc/fsl: Update defconfigs to enable some standard FSL HW features
  powerpc: Add TBI PHY node to first MDIO bus
  sbc834x: put full compat string in board match check
  powerpc/fsl-pci: Allow 64-bit PCIe devices to DMA to any memory address
  powerpc: Fix unpaired probe_hcall_entry and probe_hcall_exit
  offb: Fix setting of the pseudo-palette for >8bpp
  offb: Add palette hack for qemu "standard vga" framebuffer
  offb: Fix bug in calculating requested vram size
  powerpc/boot: Change the WARN to INFO for boot wrapper overlap message
  powerpc/44x: Fix build error on currituck platform
  powerpc/boot: Change the load address for the wrapper to fit the kernel
  powerpc/44x: Enable CRASH_DUMP for 440x
  ...

Fix up a trivial conflict in arch/powerpc/include/asm/cputime.h due to
the additional sparse-checking code for cputime_t.

90 files changed, 3258 insertions, 1839 deletions

diff --git a/arch/powerpc/platforms/40x/Kconfig b/arch/powerpc/platforms/40x/Kconfig
index 153022971da..baae85584b1 100644
--- a/arch/powerpc/platforms/40x/Kconfig
+++ b/arch/powerpc/platforms/40x/Kconfig
@@ -100,6 +100,16 @@ config XILINX_VIRTEX_GENERIC_BOARD
 	  Most Virtex designs should use this unless it needs to do some
 	  special configuration at board probe time.
 
+config OBS600
+	bool "OpenBlockS 600"
+	depends on 40x
+	default n
+	select 405EX
+	select PPC40x_SIMPLE
+	help
+	  This option enables support for PlatHome OpenBlockS 600 server
+
+
 config PPC40x_SIMPLE
 	bool "Simple PowerPC 40x board support"
 	depends on 40x
@@ -186,3 +196,14 @@ config IBM405_ERR51
 #	bool
 #	depends on !STB03xxx && PPC4xx_DMA
 #	default y
+#
+
+config APM8018X
+	bool "APM8018X"
+	depends on 40x
+	default n
+	select PPC40x_SIMPLE
+	help
+	  This option enables support for the AppliedMicro APM8018X evaluation
+	  board.
+
diff --git a/arch/powerpc/platforms/40x/ppc40x_simple.c b/arch/powerpc/platforms/40x/ppc40x_simple.c
index e8dd5c5df7d..97612068fae 100644
--- a/arch/powerpc/platforms/40x/ppc40x_simple.c
+++ b/arch/powerpc/platforms/40x/ppc40x_simple.c
@@ -55,7 +55,9 @@ static const char *board[] __initdata = {
 	"amcc,haleakala",
 	"amcc,kilauea",
 	"amcc,makalu",
-	"est,hotfoot"
+	"apm,klondike",
+	"est,hotfoot",
+	"plathome,obs600"
 };
 
 static int __init ppc40x_probe(void)
diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig
index 762322ce24a..5d5aaf6c91a 100644
--- a/arch/powerpc/platforms/44x/Kconfig
+++ b/arch/powerpc/platforms/44x/Kconfig
@@ -186,6 +186,16 @@ config ISS4xx
 	help
 	  This option enables support for the IBM ISS simulation environment
 
+config CURRITUCK
+	bool "IBM Currituck (476fpe) Support"
+	depends on PPC_47x
+	default n
+	select SWIOTLB
+	select 476FPE
+	select PPC4xx_PCI_EXPRESS
+	help
+	  This option enables support for the IBM Currituck (476fpe) evaluation board
+
 config ICON
 	bool "Icon"
 	depends on 44x
@@ -308,6 +318,10 @@ config 460SX
 	select IBM_EMAC_ZMII
 	select IBM_EMAC_TAH
 
+config 476FPE
+	bool
+	select PPC_FPU
+
 config APM821xx
 	bool
 	select PPC_FPU
diff --git a/arch/powerpc/platforms/44x/Makefile b/arch/powerpc/platforms/44x/Makefile
index 553db600721..d03833abec0 100644
--- a/arch/powerpc/platforms/44x/Makefile
+++ b/arch/powerpc/platforms/44x/Makefile
@@ -10,3 +10,4 @@ obj-$(CONFIG_XILINX_VIRTEX_5_FXT) += virtex.o
 obj-$(CONFIG_XILINX_ML510) += virtex_ml510.o
 obj-$(CONFIG_ISS4xx)	+= iss4xx.o
 obj-$(CONFIG_CANYONLANDS)+= canyonlands.o
+obj-$(CONFIG_CURRITUCK)	+= currituck.o
diff --git a/arch/powerpc/platforms/44x/currituck.c b/arch/powerpc/platforms/44x/currituck.c
new file mode 100644
index 00000000000..3f6229b5dee
--- /dev/null
+++ b/arch/powerpc/platforms/44x/currituck.c
@@ -0,0 +1,204 @@
+/*
+ * Currituck board specific routines
+ *
+ * Copyright © 2011 Tony Breeds IBM Corporation
+ *
+ * Based on earlier code:
+ *    Matt Porter <mporter@kernel.crashing.org>
+ *    Copyright 2002-2005 MontaVista Software Inc.
+ *
+ *    Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
+ *    Copyright (c) 2003-2005 Zultys Technologies
+ *
+ *    Rewritten and ported to the merged powerpc tree:
+ *    Copyright 2007 David Gibson <dwg@au1.ibm.com>, IBM Corporation.
+ *    Copyright © 2011 David Kliekamp IBM Corporation
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/memblock.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/rtc.h>
+
+#include <asm/machdep.h>
+#include <asm/prom.h>
+#include <asm/udbg.h>
+#include <asm/time.h>
+#include <asm/uic.h>
+#include <asm/ppc4xx.h>
+#include <asm/mpic.h>
+#include <asm/mmu.h>
+
+#include <linux/pci.h>
+
+static __initdata struct of_device_id ppc47x_of_bus[] = {
+	{ .compatible = "ibm,plb4", },
+	{ .compatible = "ibm,plb6", },
+	{ .compatible = "ibm,opb", },
+	{ .compatible = "ibm,ebc", },
+	{},
+};
+
+/* The EEPROM is missing and the default values are bogus.  This forces USB in
+ * to EHCI mode */
+static void __devinit quirk_ppc_currituck_usb_fixup(struct pci_dev *dev)
+{
+	if (of_machine_is_compatible("ibm,currituck")) {
+		pci_write_config_dword(dev, 0xe0, 0x0114231f);
+		pci_write_config_dword(dev, 0xe4, 0x00006c40);
+	}
+}
+DECLARE_PCI_FIXUP_HEADER(0x1033, 0x0035, quirk_ppc_currituck_usb_fixup);
+
+static int __init ppc47x_device_probe(void)
+{
+	of_platform_bus_probe(NULL, ppc47x_of_bus, NULL);
+
+	return 0;
+}
+machine_device_initcall(ppc47x, ppc47x_device_probe);
+
+/* We can have either UICs or MPICs */
+static void __init ppc47x_init_irq(void)
+{
+	struct device_node *np;
+
+	/* Find top level interrupt controller */
+	for_each_node_with_property(np, "interrupt-controller") {
+		if (of_get_property(np, "interrupts", NULL) == NULL)
+			break;
+	}
+	if (np == NULL)
+		panic("Can't find top level interrupt controller");
+
+	/* Check type and do appropriate initialization */
+	if (of_device_is_compatible(np, "chrp,open-pic")) {
+		/* The MPIC driver will get everything it needs from the
+		 * device-tree, just pass 0 to all arguments
+		 */
+		struct mpic *mpic =
+			mpic_alloc(np, 0, 0, 0, 0, " MPIC     ");
+		BUG_ON(mpic == NULL);
+		mpic_init(mpic);
+		ppc_md.get_irq = mpic_get_irq;
+	} else
+		panic("Unrecognized top level interrupt controller");
+}
+
+#ifdef CONFIG_SMP
+static void __cpuinit smp_ppc47x_setup_cpu(int cpu)
+{
+	mpic_setup_this_cpu();
+}
+
+static int __cpuinit smp_ppc47x_kick_cpu(int cpu)
+{
+	struct device_node *cpunode = of_get_cpu_node(cpu, NULL);
+	const u64 *spin_table_addr_prop;
+	u32 *spin_table;
+	extern void start_secondary_47x(void);
+
+	BUG_ON(cpunode == NULL);
+
+	/* Assume spin table. We could test for the enable-method in
+	 * the device-tree but currently there's little point as it's
+	 * our only supported method
+	 */
+	spin_table_addr_prop =
+		of_get_property(cpunode, "cpu-release-addr", NULL);
+
+	if (spin_table_addr_prop == NULL) {
+		pr_err("CPU%d: Can't start, missing cpu-release-addr !\n",
+		       cpu);
+		return 1;
+	}
+
+	/* Assume it's mapped as part of the linear mapping. This is a bit
+	 * fishy but will work fine for now
+	 *
+	 * XXX: Is there any reason to assume differently?
+	 */
+	spin_table = (u32 *)__va(*spin_table_addr_prop);
+	pr_debug("CPU%d: Spin table mapped at %p\n", cpu, spin_table);
+
+	spin_table[3] = cpu;
+	smp_wmb();
+	spin_table[1] = __pa(start_secondary_47x);
+	mb();
+
+	return 0;
+}
+
+static struct smp_ops_t ppc47x_smp_ops = {
+	.probe		= smp_mpic_probe,
+	.message_pass	= smp_mpic_message_pass,
+	.setup_cpu	= smp_ppc47x_setup_cpu,
+	.kick_cpu	= smp_ppc47x_kick_cpu,
+	.give_timebase	= smp_generic_give_timebase,
+	.take_timebase	= smp_generic_take_timebase,
+};
+
+static void __init ppc47x_smp_init(void)
+{
+	if (mmu_has_feature(MMU_FTR_TYPE_47x))
+		smp_ops = &ppc47x_smp_ops;
+}
+
+#else /* CONFIG_SMP */
+static void __init ppc47x_smp_init(void) { }
+#endif /* CONFIG_SMP */
+
+static void __init ppc47x_setup_arch(void)
+{
+
+	/* No need to check the DMA config as we /know/ our windows are all of
+ 	 * RAM.  Lets hope that doesn't change */
+#ifdef CONFIG_SWIOTLB
+	if (memblock_end_of_DRAM() > 0xffffffff) {
+		ppc_swiotlb_enable = 1;
+		set_pci_dma_ops(&swiotlb_dma_ops);
+		ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
+	}
+#endif
+	ppc47x_smp_init();
+}
+
+/*
+ * Called very early, MMU is off, device-tree isn't unflattened
+ */
+static int __init ppc47x_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+
+	if (!of_flat_dt_is_compatible(root, "ibm,currituck"))
+		return 0;
+
+	return 1;
+}
+
+/* Use USB controller should have been hardware swizzled but it wasn't :( */
+static void ppc47x_pci_irq_fixup(struct pci_dev *dev)
+{
+	if (dev->vendor == 0x1033 && (dev->device == 0x0035 ||
+	                              dev->device == 0x00e0)) {
+		dev->irq = irq_create_mapping(NULL, 47);
+		pr_info("%s: Mapping irq 47 %d\n", __func__, dev->irq);
+	}
+}
+
+define_machine(ppc47x) {
+	.name			= "PowerPC 47x",
+	.probe			= ppc47x_probe,
+	.progress		= udbg_progress,
+	.init_IRQ		= ppc47x_init_irq,
+	.setup_arch		= ppc47x_setup_arch,
+	.pci_irq_fixup		= ppc47x_pci_irq_fixup,
+	.restart		= ppc4xx_reset_system,
+	.calibrate_decr		= generic_calibrate_decr,
+};
diff --git a/arch/powerpc/platforms/44x/iss4xx.c b/arch/powerpc/platforms/44x/iss4xx.c
index 19395f18b1d..5b8cdbb82f8 100644
--- a/arch/powerpc/platforms/44x/iss4xx.c
+++ b/arch/powerpc/platforms/44x/iss4xx.c
@@ -71,7 +71,7 @@ static void __init iss4xx_init_irq(void)
 		/* The MPIC driver will get everything it needs from the
 		 * device-tree, just pass 0 to all arguments
 		 */
-		struct mpic *mpic = mpic_alloc(np, 0, MPIC_PRIMARY, 0, 0,
+		struct mpic *mpic = mpic_alloc(np, 0, 0, 0, 0,
 					       " MPIC     ");
 		BUG_ON(mpic == NULL);
 		mpic_init(mpic);
diff --git a/arch/powerpc/platforms/83xx/asp834x.c b/arch/powerpc/platforms/83xx/asp834x.c
index aa0d84d2258..464ea8e0292 100644
--- a/arch/powerpc/platforms/83xx/asp834x.c
+++ b/arch/powerpc/platforms/83xx/asp834x.c
@@ -36,38 +36,7 @@ static void __init asp834x_setup_arch(void)
 	mpc834x_usb_cfg();
 }
 
-static void __init asp834x_init_IRQ(void)
-{
-	struct device_node *np;
-
-	np = of_find_node_by_type(NULL, "ipic");
-	if (!np)
-		return;
-
-	ipic_init(np, 0);
-
-	of_node_put(np);
-
-	/* Initialize the default interrupt mapping priorities,
-	 * in case the boot rom changed something on us.
-	 */
-	ipic_set_default_priority();
-}
-
-static struct __initdata of_device_id asp8347_ids[] = {
-	{ .type = "soc", },
-	{ .compatible = "soc", },
-	{ .compatible = "simple-bus", },
-	{ .compatible = "gianfar", },
-	{},
-};
-
-static int __init asp8347_declare_of_platform_devices(void)
-{
-	of_platform_bus_probe(NULL, asp8347_ids, NULL);
-	return 0;
-}
-machine_device_initcall(asp834x, asp8347_declare_of_platform_devices);
+machine_device_initcall(asp834x, mpc83xx_declare_of_platform_devices);
 
 /*
  * Called very early, MMU is off, device-tree isn't unflattened
@@ -82,7 +51,7 @@ define_machine(asp834x) {
 	.name			= "ASP8347E",
 	.probe			= asp834x_probe,
 	.setup_arch		= asp834x_setup_arch,
-	.init_IRQ		= asp834x_init_IRQ,
+	.init_IRQ		= mpc83xx_ipic_init_IRQ,
 	.get_irq		= ipic_get_irq,
 	.restart		= mpc83xx_restart,
 	.time_init		= mpc83xx_time_init,
diff --git a/arch/powerpc/platforms/83xx/km83xx.c b/arch/powerpc/platforms/83xx/km83xx.c
index c55129f5760..65eb792a0d0 100644
--- a/arch/powerpc/platforms/83xx/km83xx.c
+++ b/arch/powerpc/platforms/83xx/km83xx.c
@@ -51,15 +51,14 @@
  */
 static void __init mpc83xx_km_setup_arch(void)
 {
+#ifdef CONFIG_QUICC_ENGINE
 	struct device_node *np;
+#endif
 
 	if (ppc_md.progress)
 		ppc_md.progress("kmpbec83xx_setup_arch()", 0);
 
-#ifdef CONFIG_PCI
-	for_each_compatible_node(np, "pci", "fsl,mpc8349-pci")
-		mpc83xx_add_bridge(np);
-#endif
+	mpc83xx_setup_pci();
 
 #ifdef CONFIG_QUICC_ENGINE
 	qe_reset();
@@ -122,54 +121,7 @@ static void __init mpc83xx_km_setup_arch(void)
 #endif				/* CONFIG_QUICC_ENGINE */
 }
 
-static struct of_device_id kmpbec83xx_ids[] = {
-	{ .type = "soc", },
-	{ .compatible = "soc", },
-	{ .compatible = "simple-bus", },
-	{ .type = "qe", },
-	{ .compatible = "fsl,qe", },
-	{},
-};
-
-static int __init kmeter_declare_of_platform_devices(void)
-{
-	/* Publish the QE devices */
-	of_platform_bus_probe(NULL, kmpbec83xx_ids, NULL);
-
-	return 0;
-}
-machine_device_initcall(mpc83xx_km, kmeter_declare_of_platform_devices);
-
-static void __init mpc83xx_km_init_IRQ(void)
-{
-	struct device_node *np;
-
-	np = of_find_compatible_node(NULL, NULL, "fsl,pq2pro-pic");
-	if (!np) {
-		np = of_find_node_by_type(NULL, "ipic");
-		if (!np)
-			return;
-	}
-
-	ipic_init(np, 0);
-
-	/* Initialize the default interrupt mapping priorities,
-	 * in case the boot rom changed something on us.
-	 */
-	ipic_set_default_priority();
-	of_node_put(np);
-
-#ifdef CONFIG_QUICC_ENGINE
-	np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
-	if (!np) {
-		np = of_find_node_by_type(NULL, "qeic");
-		if (!np)
-			return;
-	}
-	qe_ic_init(np, 0, qe_ic_cascade_low_ipic, qe_ic_cascade_high_ipic);
-	of_node_put(np);
-#endif				/* CONFIG_QUICC_ENGINE */
-}
+machine_device_initcall(mpc83xx_km, mpc83xx_declare_of_platform_devices);
 
 /* list of the supported boards */
 static char *board[] __initdata = {
@@ -198,7 +150,7 @@ define_machine(mpc83xx_km) {
 	.name		= "mpc83xx-km-platform",
 	.probe		= mpc83xx_km_probe,
 	.setup_arch	= mpc83xx_km_setup_arch,
-	.init_IRQ	= mpc83xx_km_init_IRQ,
+	.init_IRQ	= mpc83xx_ipic_and_qe_init_IRQ,
 	.get_irq	= ipic_get_irq,
 	.restart	= mpc83xx_restart,
 	.time_init	= mpc83xx_time_init,
diff --git a/arch/powerpc/platforms/83xx/misc.c b/arch/powerpc/platforms/83xx/misc.c
index f01806c940e..125336f750c 100644
--- a/arch/powerpc/platforms/83xx/misc.c
+++ b/arch/powerpc/platforms/83xx/misc.c
@@ -11,10 +11,15 @@
 
 #include <linux/stddef.h>
 #include <linux/kernel.h>
+#include <linux/of_platform.h>
+#include <linux/pci.h>
 
 #include <asm/io.h>
 #include <asm/hw_irq.h>
+#include <asm/ipic.h>
+#include <asm/qe_ic.h>
 #include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
 
 #include "mpc83xx.h"
 
@@ -65,3 +70,75 @@ long __init mpc83xx_time_init(void)
 
 	return 0;
 }
+
+void __init mpc83xx_ipic_init_IRQ(void)
+{
+	struct device_node *np;
+
+	/* looking for fsl,pq2pro-pic which is asl compatible with fsl,ipic */
+	np = of_find_compatible_node(NULL, NULL, "fsl,ipic");
+	if (!np)
+		np = of_find_node_by_type(NULL, "ipic");
+	if (!np)
+		return;
+
+	ipic_init(np, 0);
+
+	of_node_put(np);
+
+	/* Initialize the default interrupt mapping priorities,
+	 * in case the boot rom changed something on us.
+	 */
+	ipic_set_default_priority();
+}
+
+#ifdef CONFIG_QUICC_ENGINE
+void __init mpc83xx_qe_init_IRQ(void)
+{
+	struct device_node *np;
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
+	if (!np) {
+		np = of_find_node_by_type(NULL, "qeic");
+		if (!np)
+			return;
+	}
+	qe_ic_init(np, 0, qe_ic_cascade_low_ipic, qe_ic_cascade_high_ipic);
+	of_node_put(np);
+}
+
+void __init mpc83xx_ipic_and_qe_init_IRQ(void)
+{
+	mpc83xx_ipic_init_IRQ();
+	mpc83xx_qe_init_IRQ();
+}
+#endif /* CONFIG_QUICC_ENGINE */
+
+static struct of_device_id __initdata of_bus_ids[] = {
+	{ .type = "soc", },
+	{ .compatible = "soc", },
+	{ .compatible = "simple-bus" },
+	{ .compatible = "gianfar" },
+	{ .compatible = "gpio-leds", },
+	{ .type = "qe", },
+	{ .compatible = "fsl,qe", },
+	{},
+};
+
+int __init mpc83xx_declare_of_platform_devices(void)
+{
+	of_platform_bus_probe(NULL, of_bus_ids, NULL);
+	return 0;
+}
+
+#ifdef CONFIG_PCI
+void __init mpc83xx_setup_pci(void)
+{
+	struct device_node *np;
+
+	for_each_compatible_node(np, "pci", "fsl,mpc8349-pci")
+		mpc83xx_add_bridge(np);
+	for_each_compatible_node(np, "pci", "fsl,mpc8314-pcie")
+		mpc83xx_add_bridge(np);
+}
+#endif
diff --git a/arch/powerpc/platforms/83xx/mpc830x_rdb.c b/arch/powerpc/platforms/83xx/mpc830x_rdb.c
index d0c4e15b779..4f2d9fea77b 100644
--- a/arch/powerpc/platforms/83xx/mpc830x_rdb.c
+++ b/arch/powerpc/platforms/83xx/mpc830x_rdb.c
@@ -27,36 +27,13 @@
  */
 static void __init mpc830x_rdb_setup_arch(void)
 {
-#ifdef CONFIG_PCI
-	struct device_node *np;
-#endif
-
 	if (ppc_md.progress)
 		ppc_md.progress("mpc830x_rdb_setup_arch()", 0);
 
-#ifdef CONFIG_PCI
-	for_each_compatible_node(np, "pci", "fsl,mpc8308-pcie")
-		mpc83xx_add_bridge(np);
-#endif
+	mpc83xx_setup_pci();
 	mpc831x_usb_cfg();
 }
 
-static void __init mpc830x_rdb_init_IRQ(void)
-{
-	struct device_node *np;
-
-	np = of_find_node_by_type(NULL, "ipic");
-	if (!np)
-		return;
-
-	ipic_init(np, 0);
-
-	/* Initialize the default interrupt mapping priorities,
-	 * in case the boot rom changed something on us.
-	 */
-	ipic_set_default_priority();
-}
-
 static const char *board[] __initdata = {
 	"MPC8308RDB",
 	"fsl,mpc8308rdb",
@@ -72,24 +49,13 @@ static int __init mpc830x_rdb_probe(void)
 	return of_flat_dt_match(of_get_flat_dt_root(), board);
 }
 
-static struct of_device_id __initdata of_bus_ids[] = {
-	{ .compatible = "simple-bus" },
-	{ .compatible = "gianfar" },
-	{},
-};
-
-static int __init declare_of_platform_devices(void)
-{
-	of_platform_bus_probe(NULL, of_bus_ids, NULL);
-	return 0;
-}
-machine_device_initcall(mpc830x_rdb, declare_of_platform_devices);
+machine_device_initcall(mpc830x_rdb, mpc83xx_declare_of_platform_devices);
 
 define_machine(mpc830x_rdb) {
 	.name			= "MPC830x RDB",
 	.probe			= mpc830x_rdb_probe,
 	.setup_arch		= mpc830x_rdb_setup_arch,
-	.init_IRQ		= mpc830x_rdb_init_IRQ,
+	.init_IRQ		= mpc83xx_ipic_init_IRQ,
 	.get_irq		= ipic_get_irq,
 	.restart		= mpc83xx_restart,
 	.time_init		= mpc83xx_time_init,
diff --git a/arch/powerpc/platforms/83xx/mpc831x_rdb.c b/arch/powerpc/platforms/83xx/mpc831x_rdb.c
index f859ead49a8..fa25977c52d 100644
--- a/arch/powerpc/platforms/83xx/mpc831x_rdb.c
+++ b/arch/powerpc/platforms/83xx/mpc831x_rdb.c
@@ -28,38 +28,13 @@
  */
 static void __init mpc831x_rdb_setup_arch(void)
 {
-#ifdef CONFIG_PCI
-	struct device_node *np;
-#endif
-
 	if (ppc_md.progress)
 		ppc_md.progress("mpc831x_rdb_setup_arch()", 0);
 
-#ifdef CONFIG_PCI
-	for_each_compatible_node(np, "pci", "fsl,mpc8349-pci")
-		mpc83xx_add_bridge(np);
-	for_each_compatible_node(np, "pci", "fsl,mpc8314-pcie")
-		mpc83xx_add_bridge(np);
-#endif
+	mpc83xx_setup_pci();
 	mpc831x_usb_cfg();
 }
 
-static void __init mpc831x_rdb_init_IRQ(void)
-{
-	struct device_node *np;
-
-	np = of_find_node_by_type(NULL, "ipic");
-	if (!np)
-		return;
-
-	ipic_init(np, 0);
-
-	/* Initialize the default interrupt mapping priorities,
-	 * in case the boot rom changed something on us.
-	 */
-	ipic_set_default_priority();
-}
-
 static const char *board[] __initdata = {
 	"MPC8313ERDB",
 	"fsl,mpc8315erdb",
@@ -74,25 +49,13 @@ static int __init mpc831x_rdb_probe(void)
 	return of_flat_dt_match(of_get_flat_dt_root(), board);
 }
 
-static struct of_device_id __initdata of_bus_ids[] = {
-	{ .compatible = "simple-bus" },
-	{ .compatible = "gianfar" },
-	{ .compatible = "gpio-leds", },
-	{},
-};
-
-static int __init declare_of_platform_devices(void)
-{
-	of_platform_bus_probe(NULL, of_bus_ids, NULL);
-	return 0;
-}
-machine_device_initcall(mpc831x_rdb, declare_of_platform_devices);
+machine_device_initcall(mpc831x_rdb, mpc83xx_declare_of_platform_devices);
 
 define_machine(mpc831x_rdb) {
 	.name			= "MPC831x RDB",
 	.probe			= mpc831x_rdb_probe,
 	.setup_arch		= mpc831x_rdb_setup_arch,
-	.init_IRQ		= mpc831x_rdb_init_IRQ,
+	.init_IRQ		= mpc83xx_ipic_init_IRQ,
 	.get_irq		= ipic_get_irq,
 	.restart		= mpc83xx_restart,
 	.time_init		= mpc83xx_time_init,
diff --git a/arch/powerpc/platforms/83xx/mpc832x_mds.c b/arch/powerpc/platforms/83xx/mpc832x_mds.c
index 32a52896822..e36bc611dd6 100644
--- a/arch/powerpc/platforms/83xx/mpc832x_mds.c
+++ b/arch/powerpc/platforms/83xx/mpc832x_mds.c
@@ -72,10 +72,7 @@ static void __init mpc832x_sys_setup_arch(void)
 		of_node_put(np);
 	}
 
-#ifdef CONFIG_PCI
-	for_each_compatible_node(np, "pci", "fsl,mpc8349-pci")
-		mpc83xx_add_bridge(np);
-#endif
+	mpc83xx_setup_pci();
 
 #ifdef CONFIG_QUICC_ENGINE
 	qe_reset();
@@ -101,51 +98,7 @@ static void __init mpc832x_sys_setup_arch(void)
 #endif				/* CONFIG_QUICC_ENGINE */
 }
 
-static struct of_device_id mpc832x_ids[] = {
-	{ .type = "soc", },
-	{ .compatible = "soc", },
-	{ .compatible = "simple-bus", },
-	{ .type = "qe", },
-	{ .compatible = "fsl,qe", },
-	{},
-};
-
-static int __init mpc832x_declare_of_platform_devices(void)
-{
-	/* Publish the QE devices */
-	of_platform_bus_probe(NULL, mpc832x_ids, NULL);
-
-	return 0;
-}
-machine_device_initcall(mpc832x_mds, mpc832x_declare_of_platform_devices);
-
-static void __init mpc832x_sys_init_IRQ(void)
-{
-	struct device_node *np;
-
-	np = of_find_node_by_type(NULL, "ipic");
-	if (!np)
-		return;
-
-	ipic_init(np, 0);
-
-	/* Initialize the default interrupt mapping priorities,
-	 * in case the boot rom changed something on us.
-	 */
-	ipic_set_default_priority();
-	of_node_put(np);
-
-#ifdef CONFIG_QUICC_ENGINE
-	np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
-	if (!np) {
-		np = of_find_node_by_type(NULL, "qeic");
-		if (!np)
-			return;
-	}
-	qe_ic_init(np, 0, qe_ic_cascade_low_ipic, qe_ic_cascade_high_ipic);
-	of_node_put(np);
-#endif				/* CONFIG_QUICC_ENGINE */
-}
+machine_device_initcall(mpc832x_mds, mpc83xx_declare_of_platform_devices);
 
 /*
  * Called very early, MMU is off, device-tree isn't unflattened
@@ -161,7 +114,7 @@ define_machine(mpc832x_mds) {
 	.name 		= "MPC832x MDS",
 	.probe 		= mpc832x_sys_probe,
 	.setup_arch 	= mpc832x_sys_setup_arch,
-	.init_IRQ 	= mpc832x_sys_init_IRQ,
+	.init_IRQ	= mpc83xx_ipic_and_qe_init_IRQ,
 	.get_irq 	= ipic_get_irq,
 	.restart 	= mpc83xx_restart,
 	.time_init 	= mpc83xx_time_init,
diff --git a/arch/powerpc/platforms/83xx/mpc832x_rdb.c b/arch/powerpc/platforms/83xx/mpc832x_rdb.c
index 17f99745f0e..eff5baabc3f 100644
--- a/arch/powerpc/platforms/83xx/mpc832x_rdb.c
+++ b/arch/powerpc/platforms/83xx/mpc832x_rdb.c
@@ -193,17 +193,14 @@ machine_device_initcall(mpc832x_rdb, mpc832x_spi_init);
  */
 static void __init mpc832x_rdb_setup_arch(void)
 {
-#if defined(CONFIG_PCI) || defined(CONFIG_QUICC_ENGINE)
+#if defined(CONFIG_QUICC_ENGINE)
 	struct device_node *np;
 #endif
 
 	if (ppc_md.progress)
 		ppc_md.progress("mpc832x_rdb_setup_arch()", 0);
 
-#ifdef CONFIG_PCI
-	for_each_compatible_node(np, "pci", "fsl,mpc8349-pci")
-		mpc83xx_add_bridge(np);
-#endif
+	mpc83xx_setup_pci();
 
 #ifdef CONFIG_QUICC_ENGINE
 	qe_reset();
@@ -218,52 +215,7 @@ static void __init mpc832x_rdb_setup_arch(void)
 #endif				/* CONFIG_QUICC_ENGINE */
 }
 
-static struct of_device_id mpc832x_ids[] = {
-	{ .type = "soc", },
-	{ .compatible = "soc", },
-	{ .compatible = "simple-bus", },
-	{ .type = "qe", },
-	{ .compatible = "fsl,qe", },
-	{},
-};
-
-static int __init mpc832x_declare_of_platform_devices(void)
-{
-	/* Publish the QE devices */
-	of_platform_bus_probe(NULL, mpc832x_ids, NULL);
-
-	return 0;
-}
-machine_device_initcall(mpc832x_rdb, mpc832x_declare_of_platform_devices);
-
-static void __init mpc832x_rdb_init_IRQ(void)
-{
-
-	struct device_node *np;
-
-	np = of_find_node_by_type(NULL, "ipic");
-	if (!np)
-		return;
-
-	ipic_init(np, 0);
-
-	/* Initialize the default interrupt mapping priorities,
-	 * in case the boot rom changed something on us.
-	 */
-	ipic_set_default_priority();
-	of_node_put(np);
-
-#ifdef CONFIG_QUICC_ENGINE
-	np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
-	if (!np) {
-		np = of_find_node_by_type(NULL, "qeic");
-		if (!np)
-			return;
-	}
-	qe_ic_init(np, 0, qe_ic_cascade_low_ipic, qe_ic_cascade_high_ipic);
-	of_node_put(np);
-#endif				/* CONFIG_QUICC_ENGINE */
-}
+machine_device_initcall(mpc832x_rdb, mpc83xx_declare_of_platform_devices);
 
 /*
  * Called very early, MMU is off, device-tree isn't unflattened
@@ -279,7 +231,7 @@ define_machine(mpc832x_rdb) {
 	.name		= "MPC832x RDB",
 	.probe		= mpc832x_rdb_probe,
 	.setup_arch	= mpc832x_rdb_setup_arch,
-	.init_IRQ	= mpc832x_rdb_init_IRQ,
+	.init_IRQ	= mpc83xx_ipic_and_qe_init_IRQ,
 	.get_irq	= ipic_get_irq,
 	.restart	= mpc83xx_restart,
 	.time_init	= mpc83xx_time_init,
diff --git a/arch/powerpc/platforms/83xx/mpc834x_itx.c b/arch/powerpc/platforms/83xx/mpc834x_itx.c
index 6b45969567d..39849dd1b5b 100644
--- a/arch/powerpc/platforms/83xx/mpc834x_itx.c
+++ b/arch/powerpc/platforms/83xx/mpc834x_itx.c
@@ -41,13 +41,12 @@
 
 static struct of_device_id __initdata mpc834x_itx_ids[] = {
 	{ .compatible = "fsl,pq2pro-localbus", },
-	{ .compatible = "simple-bus", },
-	{ .compatible = "gianfar", },
 	{},
 };
 
 static int __init mpc834x_itx_declare_of_platform_devices(void)
 {
+	mpc83xx_declare_of_platform_devices();
 	return of_platform_bus_probe(NULL, mpc834x_itx_ids, NULL);
 }
 machine_device_initcall(mpc834x_itx, mpc834x_itx_declare_of_platform_devices);
@@ -59,37 +58,14 @@ machine_device_initcall(mpc834x_itx, mpc834x_itx_declare_of_platform_devices);
  */
 static void __init mpc834x_itx_setup_arch(void)
 {
-#ifdef CONFIG_PCI
-	struct device_node *np;
-#endif
-
 	if (ppc_md.progress)
 		ppc_md.progress("mpc834x_itx_setup_arch()", 0);
 
-#ifdef CONFIG_PCI
-	for_each_compatible_node(np, "pci", "fsl,mpc8349-pci")
-		mpc83xx_add_bridge(np);
-#endif
+	mpc83xx_setup_pci();
 
 	mpc834x_usb_cfg();
 }
 
-static void __init mpc834x_itx_init_IRQ(void)
-{
-	struct device_node *np;
-
-	np = of_find_node_by_type(NULL, "ipic");
-	if (!np)
-		return;
-
-	ipic_init(np, 0);
-
-	/* Initialize the default interrupt mapping priorities,
-	 * in case the boot rom changed something on us.
-	 */
-	ipic_set_default_priority();
-}
-
 /*
  * Called very early, MMU is off, device-tree isn't unflattened
  */
@@ -104,7 +80,7 @@ define_machine(mpc834x_itx) {
 	.name			= "MPC834x ITX",
 	.probe			= mpc834x_itx_probe,
 	.setup_arch		= mpc834x_itx_setup_arch,
-	.init_IRQ		= mpc834x_itx_init_IRQ,
+	.init_IRQ		= mpc83xx_ipic_init_IRQ,
 	.get_irq		= ipic_get_irq,
 	.restart		= mpc83xx_restart,
 	.time_init		= mpc83xx_time_init,
diff --git a/arch/powerpc/platforms/83xx/mpc834x_mds.c b/arch/powerpc/platforms/83xx/mpc834x_mds.c
index 041c5177e73..5828d8e97c3 100644
--- a/arch/powerpc/platforms/83xx/mpc834x_mds.c
+++ b/arch/powerpc/platforms/83xx/mpc834x_mds.c
@@ -77,51 +77,15 @@ static int mpc834xemds_usb_cfg(void)
  */
 static void __init mpc834x_mds_setup_arch(void)
 {
-#ifdef CONFIG_PCI
-	struct device_node *np;
-#endif
-
 	if (ppc_md.progress)
 		ppc_md.progress("mpc834x_mds_setup_arch()", 0);
 
-#ifdef CONFIG_PCI
-	for_each_compatible_node(np, "pci", "fsl,mpc8349-pci")
-		mpc83xx_add_bridge(np);
-#endif
+	mpc83xx_setup_pci();
 
 	mpc834xemds_usb_cfg();
 }
 
-static void __init mpc834x_mds_init_IRQ(void)
-{
-	struct device_node *np;
-
-	np = of_find_node_by_type(NULL, "ipic");
-	if (!np)
-		return;
-
-	ipic_init(np, 0);
-
-	/* Initialize the default interrupt mapping priorities,
-	 * in case the boot rom changed something on us.
-	 */
-	ipic_set_default_priority();
-}
-
-static struct of_device_id mpc834x_ids[] = {
-	{ .type = "soc", },
-	{ .compatible = "soc", },
-	{ .compatible = "simple-bus", },
-	{ .compatible = "gianfar", },
-	{},
-};
-
-static int __init mpc834x_declare_of_platform_devices(void)
-{
-	of_platform_bus_probe(NULL, mpc834x_ids, NULL);
-	return 0;
-}
-machine_device_initcall(mpc834x_mds, mpc834x_declare_of_platform_devices);
+machine_device_initcall(mpc834x_mds, mpc83xx_declare_of_platform_devices);
 
 /*
  * Called very early, MMU is off, device-tree isn't unflattened
@@ -137,7 +101,7 @@ define_machine(mpc834x_mds) {
 	.name			= "MPC834x MDS",
 	.probe			= mpc834x_mds_probe,
 	.setup_arch		= mpc834x_mds_setup_arch,
-	.init_IRQ		= mpc834x_mds_init_IRQ,
+	.init_IRQ		= mpc83xx_ipic_init_IRQ,
 	.get_irq		= ipic_get_irq,
 	.restart		= mpc83xx_restart,
 	.time_init		= mpc83xx_time_init,
diff --git a/arch/powerpc/platforms/83xx/mpc836x_mds.c b/arch/powerpc/platforms/83xx/mpc836x_mds.c
index 934cc8c46bb..ad8e4bcd7d5 100644
--- a/arch/powerpc/platforms/83xx/mpc836x_mds.c
+++ b/arch/powerpc/platforms/83xx/mpc836x_mds.c
@@ -80,10 +80,7 @@ static void __init mpc836x_mds_setup_arch(void)
 		of_node_put(np);
 	}
 
-#ifdef CONFIG_PCI
-	for_each_compatible_node(np, "pci", "fsl,mpc8349-pci")
-		mpc83xx_add_bridge(np);
-#endif
+	mpc83xx_setup_pci();
 
 #ifdef CONFIG_QUICC_ENGINE
 	qe_reset();
@@ -144,23 +141,7 @@ static void __init mpc836x_mds_setup_arch(void)
 #endif				/* CONFIG_QUICC_ENGINE */
 }
 
-static struct of_device_id mpc836x_ids[] = {
-	{ .type = "soc", },
-	{ .compatible = "soc", },
-	{ .compatible = "simple-bus", },
-	{ .type = "qe", },
-	{ .compatible = "fsl,qe", },
-	{},
-};
-
-static int __init mpc836x_declare_of_platform_devices(void)
-{
-	/* Publish the QE devices */
-	of_platform_bus_probe(NULL, mpc836x_ids, NULL);
-
-	return 0;
-}
-machine_device_initcall(mpc836x_mds, mpc836x_declare_of_platform_devices);
+machine_device_initcall(mpc836x_mds, mpc83xx_declare_of_platform_devices);
 
 #ifdef CONFIG_QE_USB
 static int __init mpc836x_usb_cfg(void)
@@ -226,34 +207,6 @@ err:
 machine_arch_initcall(mpc836x_mds, mpc836x_usb_cfg);
 #endif /* CONFIG_QE_USB */
 
-static void __init mpc836x_mds_init_IRQ(void)
-{
-	struct device_node *np;
-
-	np = of_find_node_by_type(NULL, "ipic");
-	if (!np)
-		return;
-
-	ipic_init(np, 0);
-
-	/* Initialize the default interrupt mapping priorities,
-	 * in case the boot rom changed something on us.
-	 */
-	ipic_set_default_priority();
-	of_node_put(np);
-
-#ifdef CONFIG_QUICC_ENGINE
-	np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
-	if (!np) {
-		np = of_find_node_by_type(NULL, "qeic");
-		if (!np)
-			return;
-	}
-	qe_ic_init(np, 0, qe_ic_cascade_low_ipic, qe_ic_cascade_high_ipic);
-	of_node_put(np);
-#endif				/* CONFIG_QUICC_ENGINE */
-}
-
 /*
  * Called very early, MMU is off, device-tree isn't unflattened
  */
@@ -268,7 +221,7 @@ define_machine(mpc836x_mds) {
 	.name		= "MPC836x MDS",
 	.probe		= mpc836x_mds_probe,
 	.setup_arch	= mpc836x_mds_setup_arch,
-	.init_IRQ	= mpc836x_mds_init_IRQ,
+	.init_IRQ	= mpc83xx_ipic_and_qe_init_IRQ,
 	.get_irq	= ipic_get_irq,
 	.restart	= mpc83xx_restart,
 	.time_init	= mpc83xx_time_init,
diff --git a/arch/powerpc/platforms/83xx/mpc836x_rdk.c b/arch/powerpc/platforms/83xx/mpc836x_rdk.c
index b0090aac964..f8769d713d6 100644
--- a/arch/powerpc/platforms/83xx/mpc836x_rdk.c
+++ b/arch/powerpc/platforms/83xx/mpc836x_rdk.c
@@ -27,61 +27,19 @@
 
 #include "mpc83xx.h"
 
-static struct of_device_id __initdata mpc836x_rdk_ids[] = {
-	{ .compatible = "simple-bus", },
-	{},
-};
-
-static int __init mpc836x_rdk_declare_of_platform_devices(void)
-{
-	return of_platform_bus_probe(NULL, mpc836x_rdk_ids, NULL);
-}
-machine_device_initcall(mpc836x_rdk, mpc836x_rdk_declare_of_platform_devices);
+machine_device_initcall(mpc836x_rdk, mpc83xx_declare_of_platform_devices);
 
 static void __init mpc836x_rdk_setup_arch(void)
 {
-#ifdef CONFIG_PCI
-	struct device_node *np;
-#endif
-
 	if (ppc_md.progress)
 		ppc_md.progress("mpc836x_rdk_setup_arch()", 0);
 
-#ifdef CONFIG_PCI
-	for_each_compatible_node(np, "pci", "fsl,mpc8349-pci")
-		mpc83xx_add_bridge(np);
-#endif
+	mpc83xx_setup_pci();
 #ifdef CONFIG_QUICC_ENGINE
 	qe_reset();
 #endif
 }
 
-static void __init mpc836x_rdk_init_IRQ(void)
-{
-	struct device_node *np;
-
-	np = of_find_compatible_node(NULL, NULL, "fsl,ipic");
-	if (!np)
-		return;
-
-	ipic_init(np, 0);
-
-	/*
-	 * Initialize the default interrupt mapping priorities,
-	 * in case the boot rom changed something on us.
-	 */
-	ipic_set_default_priority();
-	of_node_put(np);
-#ifdef CONFIG_QUICC_ENGINE
-	np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
-	if (!np)
-		return;
-
-	qe_ic_init(np, 0, qe_ic_cascade_low_ipic, qe_ic_cascade_high_ipic);
-	of_node_put(np);
-#endif
-}
-
 /*
  * Called very early, MMU is off, device-tree isn't unflattened.
  */
@@ -96,7 +54,7 @@ define_machine(mpc836x_rdk) {
 	.name		= "MPC836x RDK",
 	.probe		= mpc836x_rdk_probe,
 	.setup_arch	= mpc836x_rdk_setup_arch,
-	.init_IRQ	= mpc836x_rdk_init_IRQ,
+	.init_IRQ	= mpc83xx_ipic_and_qe_init_IRQ,
 	.get_irq	= ipic_get_irq,
 	.restart	= mpc83xx_restart,
 	.time_init	= mpc83xx_time_init,
diff --git a/arch/powerpc/platforms/83xx/mpc837x_mds.c b/arch/powerpc/platforms/83xx/mpc837x_mds.c
index 83068322abd..e53a60b6c86 100644
--- a/arch/powerpc/platforms/83xx/mpc837x_mds.c
+++ b/arch/powerpc/platforms/83xx/mpc837x_mds.c
@@ -79,54 +79,14 @@ out:
  */
 static void __init mpc837x_mds_setup_arch(void)
 {
-#ifdef CONFIG_PCI
-	struct device_node *np;
-#endif
-
 	if (ppc_md.progress)
 		ppc_md.progress("mpc837x_mds_setup_arch()", 0);
 
-#ifdef CONFIG_PCI
-	for_each_compatible_node(np, "pci", "fsl,mpc8349-pci")
-		mpc83xx_add_bridge(np);
-	for_each_compatible_node(np, "pci", "fsl,mpc8314-pcie")
-		mpc83xx_add_bridge(np);
-#endif
+	mpc83xx_setup_pci();
 	mpc837xmds_usb_cfg();
 }
 
-static struct of_device_id mpc837x_ids[] = {
-	{ .type = "soc", },
-	{ .compatible = "soc", },
-	{ .compatible = "simple-bus", },
-	{ .compatible = "gianfar", },
-	{},
-};
-
-static int __init mpc837x_declare_of_platform_devices(void)
-{
-	/* Publish platform_device */
-	of_platform_bus_probe(NULL, mpc837x_ids, NULL);
-
-	return 0;
-}
-machine_device_initcall(mpc837x_mds, mpc837x_declare_of_platform_devices);
-
-static void __init mpc837x_mds_init_IRQ(void)
-{
-	struct device_node *np;
-
-	np = of_find_compatible_node(NULL, NULL, "fsl,ipic");
-	if (!np)
-		return;
-
-	ipic_init(np, 0);
-
-	/* Initialize the default interrupt mapping priorities,
-	 * in case the boot rom changed something on us.
-	 */
-	ipic_set_default_priority();
-}
+machine_device_initcall(mpc837x_mds, mpc83xx_declare_of_platform_devices);
 
 /*
  * Called very early, MMU is off, device-tree isn't unflattened
@@ -142,7 +102,7 @@ define_machine(mpc837x_mds) {
 	.name			= "MPC837x MDS",
 	.probe			= mpc837x_mds_probe,
 	.setup_arch		= mpc837x_mds_setup_arch,
-	.init_IRQ		= mpc837x_mds_init_IRQ,
+	.init_IRQ		= mpc83xx_ipic_init_IRQ,
 	.get_irq		= ipic_get_irq,
 	.restart		= mpc83xx_restart,
 	.time_init		= mpc83xx_time_init,
diff --git a/arch/powerpc/platforms/83xx/mpc837x_rdb.c b/arch/powerpc/platforms/83xx/mpc837x_rdb.c
index 7bafbf2ec0f..16c9c9cbbb7 100644
--- a/arch/powerpc/platforms/83xx/mpc837x_rdb.c
+++ b/arch/powerpc/platforms/83xx/mpc837x_rdb.c
@@ -50,56 +50,15 @@ static void mpc837x_rdb_sd_cfg(void)
  */
 static void __init mpc837x_rdb_setup_arch(void)
 {
-#ifdef CONFIG_PCI
-	struct device_node *np;
-#endif
-
 	if (ppc_md.progress)
 		ppc_md.progress("mpc837x_rdb_setup_arch()", 0);
 
-#ifdef CONFIG_PCI
-	for_each_compatible_node(np, "pci", "fsl,mpc8349-pci")
-		mpc83xx_add_bridge(np);
-	for_each_compatible_node(np, "pci", "fsl,mpc8314-pcie")
-		mpc83xx_add_bridge(np);
-#endif
+	mpc83xx_setup_pci();
 	mpc837x_usb_cfg();
 	mpc837x_rdb_sd_cfg();
 }
 
-static struct of_device_id mpc837x_ids[] = {
-	{ .type = "soc", },
-	{ .compatible = "soc", },
-	{ .compatible = "simple-bus", },
-	{ .compatible = "gianfar", },
-	{ .compatible = "gpio-leds", },
-	{},
-};
-
-static int __init mpc837x_declare_of_platform_devices(void)
-{
-	/* Publish platform_device */
-	of_platform_bus_probe(NULL, mpc837x_ids, NULL);
-
-	return 0;
-}
-machine_device_initcall(mpc837x_rdb, mpc837x_declare_of_platform_devices);
-
-static void __init mpc837x_rdb_init_IRQ(void)
-{
-	struct device_node *np;
-
-	np = of_find_compatible_node(NULL, NULL, "fsl,ipic");
-	if (!np)
-		return;
-
-	ipic_init(np, 0);
-
-	/* Initialize the default interrupt mapping priorities,
-	 * in case the boot rom changed something on us.
-	 */
-	ipic_set_default_priority();
-}
+machine_device_initcall(mpc837x_rdb, mpc83xx_declare_of_platform_devices);
 
 static const char *board[] __initdata = {
 	"fsl,mpc8377rdb",
@@ -121,7 +80,7 @@ define_machine(mpc837x_rdb) {
 	.name			= "MPC837x RDB/WLAN",
 	.probe			= mpc837x_rdb_probe,
 	.setup_arch		= mpc837x_rdb_setup_arch,
-	.init_IRQ		= mpc837x_rdb_init_IRQ,
+	.init_IRQ		= mpc83xx_ipic_init_IRQ,
 	.get_irq		= ipic_get_irq,
 	.restart		= mpc83xx_restart,
 	.time_init		= mpc83xx_time_init,
diff --git a/arch/powerpc/platforms/83xx/mpc83xx.h b/arch/powerpc/platforms/83xx/mpc83xx.h
index 82a434510d8..0cf74d7ea1c 100644
--- a/arch/powerpc/platforms/83xx/mpc83xx.h
+++ b/arch/powerpc/platforms/83xx/mpc83xx.h
@@ -70,5 +70,21 @@ extern long mpc83xx_time_init(void);
 extern int mpc837x_usb_cfg(void);
 extern int mpc834x_usb_cfg(void);
 extern int mpc831x_usb_cfg(void);
+extern void mpc83xx_ipic_init_IRQ(void);
+#ifdef CONFIG_QUICC_ENGINE
+extern void mpc83xx_qe_init_IRQ(void);
+extern void mpc83xx_ipic_and_qe_init_IRQ(void);
+#else
+static inline void __init mpc83xx_qe_init_IRQ(void) {}
+#define mpc83xx_ipic_and_qe_init_IRQ mpc83xx_ipic_init_IRQ
+#endif /* CONFIG_QUICC_ENGINE */
+
+#ifdef CONFIG_PCI
+extern void mpc83xx_setup_pci(void);
+#else
+#define mpc83xx_setup_pci()	do {} while (0)
+#endif
+
+extern int mpc83xx_declare_of_platform_devices(void);
 
 #endif				/* __MPC83XX_H__ */
diff --git a/arch/powerpc/platforms/83xx/sbc834x.c b/arch/powerpc/platforms/83xx/sbc834x.c
index af41d8c810a..8a81d7640b1 100644
--- a/arch/powerpc/platforms/83xx/sbc834x.c
+++ b/arch/powerpc/platforms/83xx/sbc834x.c
@@ -48,52 +48,13 @@
  */
 static void __init sbc834x_setup_arch(void)
 {
-#ifdef CONFIG_PCI
-	struct device_node *np;
-#endif
-
 	if (ppc_md.progress)
 		ppc_md.progress("sbc834x_setup_arch()", 0);
 
-#ifdef CONFIG_PCI
-	for_each_compatible_node(np, "pci", "fsl,mpc8349-pci")
-		mpc83xx_add_bridge(np);
-#endif
-
+	mpc83xx_setup_pci();
 }
 
-static void __init sbc834x_init_IRQ(void)
-{
-	struct device_node *np;
-
-	np = of_find_node_by_type(NULL, "ipic");
-	if (!np)
-		return;
-
-	ipic_init(np, 0);
-
-	/* Initialize the default interrupt mapping priorities,
-	 * in case the boot rom changed something on us.
-	 */
-	ipic_set_default_priority();
-
-	of_node_put(np);
-}
-
-static struct __initdata of_device_id sbc834x_ids[] = {
-	{ .type = "soc", },
-	{ .compatible = "soc", },
-	{ .compatible = "simple-bus", },
-	{ .compatible = "gianfar", },
-	{},
-};
-
-static int __init sbc834x_declare_of_platform_devices(void)
-{
-	of_platform_bus_probe(NULL, sbc834x_ids, NULL);
-	return 0;
-}
-machine_device_initcall(sbc834x, sbc834x_declare_of_platform_devices);
+machine_device_initcall(sbc834x, mpc83xx_declare_of_platform_devices);
 
 /*
  * Called very early, MMU is off, device-tree isn't unflattened
@@ -102,14 +63,14 @@ static int __init sbc834x_probe(void)
 {
 	unsigned long root = of_get_flat_dt_root();
 
-	return of_flat_dt_is_compatible(root, "SBC834x");
+	return of_flat_dt_is_compatible(root, "SBC834xE");
 }
 
 define_machine(sbc834x) {
-	.name			= "SBC834x",
+	.name			= "SBC834xE",
 	.probe			= sbc834x_probe,
 	.setup_arch		= sbc834x_setup_arch,
-	.init_IRQ		= sbc834x_init_IRQ,
+	.init_IRQ		= mpc83xx_ipic_init_IRQ,
 	.get_irq		= ipic_get_irq,
 	.restart		= mpc83xx_restart,
 	.time_init		= mpc83xx_time_init,
diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile
index bc5acb95917..9cb2d4320dc 100644
--- a/arch/powerpc/platforms/85xx/Makefile
+++ b/arch/powerpc/platforms/85xx/Makefile
@@ -3,6 +3,8 @@
 #
 obj-$(CONFIG_SMP) += smp.o
 
+obj-y += common.o
+
 obj-$(CONFIG_MPC8540_ADS) += mpc85xx_ads.o
 obj-$(CONFIG_MPC8560_ADS) += mpc85xx_ads.o
 obj-$(CONFIG_MPC85xx_CDS) += mpc85xx_cds.o
diff --git a/arch/powerpc/platforms/85xx/common.c b/arch/powerpc/platforms/85xx/common.c
new file mode 100644
index 00000000000..9fef5302adc
--- /dev/null
+++ b/arch/powerpc/platforms/85xx/common.c
@@ -0,0 +1,66 @@
+/*
+ * Routines common to most mpc85xx-based boards.
+ *
+ * This is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/of_platform.h>
+
+#include <sysdev/cpm2_pic.h>
+
+#include "mpc85xx.h"
+
+static struct of_device_id __initdata mpc85xx_common_ids[] = {
+	{ .type = "soc", },
+	{ .compatible = "soc", },
+	{ .compatible = "simple-bus", },
+	{ .name = "cpm", },
+	{ .name = "localbus", },
+	{ .compatible = "gianfar", },
+	{ .compatible = "fsl,qe", },
+	{ .compatible = "fsl,cpm2", },
+	{ .compatible = "fsl,srio", },
+	{},
+};
+
+int __init mpc85xx_common_publish_devices(void)
+{
+	return of_platform_bus_probe(NULL, mpc85xx_common_ids, NULL);
+}
+#ifdef CONFIG_CPM2
+static void cpm2_cascade(unsigned int irq, struct irq_desc *desc)
+{
+	struct irq_chip *chip = irq_desc_get_chip(desc);
+	int cascade_irq;
+
+	while ((cascade_irq = cpm2_get_irq()) >= 0)
+		generic_handle_irq(cascade_irq);
+
+	chip->irq_eoi(&desc->irq_data);
+}
+
+
+void __init mpc85xx_cpm2_pic_init(void)
+{
+	struct device_node *np;
+	int irq;
+
+	/* Setup CPM2 PIC */
+	np = of_find_compatible_node(NULL, NULL, "fsl,cpm2-pic");
+	if (np == NULL) {
+		printk(KERN_ERR "PIC init: can not find fsl,cpm2-pic node\n");
+		return;
+	}
+	irq = irq_of_parse_and_map(np, 0);
+	if (irq == NO_IRQ) {
+		of_node_put(np);
+		printk(KERN_ERR "PIC init: got no IRQ for cpm cascade\n");
+		return;
+	}
+
+	cpm2_pic_init(np);
+	of_node_put(np);
+	irq_set_chained_handler(irq, cpm2_cascade);
+}
+#endif
diff --git a/arch/powerpc/platforms/85xx/corenet_ds.c b/arch/powerpc/platforms/85xx/corenet_ds.c
index 802ad110b75..07e3e6c4737 100644
--- a/arch/powerpc/platforms/85xx/corenet_ds.c
+++ b/arch/powerpc/platforms/85xx/corenet_ds.c
@@ -31,32 +31,18 @@
 #include <linux/of_platform.h>
 #include <sysdev/fsl_soc.h>
 #include <sysdev/fsl_pci.h>
+#include "smp.h"
 
 void __init corenet_ds_pic_init(void)
 {
 	struct mpic *mpic;
-	struct resource r;
-	struct device_node *np = NULL;
-	unsigned int flags = MPIC_PRIMARY | MPIC_BIG_ENDIAN |
+	unsigned int flags = MPIC_BIG_ENDIAN |
 				MPIC_BROKEN_FRR_NIRQS | MPIC_SINGLE_DEST_CPU;
 
-	np = of_find_node_by_type(np, "open-pic");
-
-	if (np == NULL) {
-		printk(KERN_ERR "Could not find open-pic node\n");
-		return;
-	}
-
-	if (of_address_to_resource(np, 0, &r)) {
-		printk(KERN_ERR "Failed to map mpic register space\n");
-		of_node_put(np);
-		return;
-	}
-
 	if (ppc_md.get_irq == mpic_get_coreint_irq)
 		flags |= MPIC_ENABLE_COREINT;
 
-	mpic = mpic_alloc(np, r.start, flags, 0, 256, " OpenPIC  ");
+	mpic = mpic_alloc(NULL, 0, flags, 0, 256, " OpenPIC  ");
 	BUG_ON(mpic == NULL);
 
 	mpic_init(mpic);
@@ -65,10 +51,6 @@ void __init corenet_ds_pic_init(void)
 /*
  * Setup the architecture
  */
-#ifdef CONFIG_SMP
-void __init mpc85xx_smp_init(void);
-#endif
-
 void __init corenet_ds_setup_arch(void)
 {
 #ifdef CONFIG_PCI
@@ -77,9 +59,7 @@ void __init corenet_ds_setup_arch(void)
 #endif
 	dma_addr_t max = 0xffffffff;
 
-#ifdef CONFIG_SMP
 	mpc85xx_smp_init();
-#endif
 
 #ifdef CONFIG_PCI
 	for_each_node_by_type(np, "pci") {
@@ -112,7 +92,7 @@ static const struct of_device_id of_device_ids[] __devinitconst = {
 		.compatible	= "simple-bus"
 	},
 	{
-		.compatible	= "fsl,rapidio-delta",
+		.compatible	= "fsl,srio",
 	},
 	{
 		.compatible	= "fsl,p4080-pcie",
diff --git a/arch/powerpc/platforms/85xx/ksi8560.c b/arch/powerpc/platforms/85xx/ksi8560.c
index c46f9359be1..20f75d7819c 100644
--- a/arch/powerpc/platforms/85xx/ksi8560.c
+++ b/arch/powerpc/platforms/85xx/ksi8560.c
@@ -35,6 +35,7 @@
 #include <asm/cpm2.h>
 #include <sysdev/cpm2_pic.h>
 
+#include "mpc85xx.h"
 
 #define KSI8560_CPLD_HVR		0x04 /* Hardware Version Register */
 #define KSI8560_CPLD_PVR		0x08 /* PLD Version Register */
@@ -54,60 +55,15 @@ static void machine_restart(char *cmd)
 	for (;;);
 }
 
-static void cpm2_cascade(unsigned int irq, struct irq_desc *desc)
-{
-	struct irq_chip *chip = irq_desc_get_chip(desc);
-	int cascade_irq;
-
-	while ((cascade_irq = cpm2_get_irq()) >= 0)
-		generic_handle_irq(cascade_irq);
-
-	chip->irq_eoi(&desc->irq_data);
-}
-
 static void __init ksi8560_pic_init(void)
 {
-	struct mpic *mpic;
-	struct resource r;
-	struct device_node *np;
-#ifdef CONFIG_CPM2
-	int irq;
-#endif
-
-	np = of_find_node_by_type(NULL, "open-pic");
-
-	if (np == NULL) {
-		printk(KERN_ERR "Could not find open-pic node\n");
-		return;
-	}
-
-	if (of_address_to_resource(np, 0, &r)) {
-		printk(KERN_ERR "Could not map mpic register space\n");
-		of_node_put(np);
-		return;
-	}
-
-	mpic = mpic_alloc(np, r.start,
-			MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
+	struct mpic *mpic = mpic_alloc(NULL, 0,
+			MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
 			0, 256, " OpenPIC  ");
 	BUG_ON(mpic == NULL);
-	of_node_put(np);
-
 	mpic_init(mpic);
 
-#ifdef CONFIG_CPM2
-	/* Setup CPM2 PIC */
-	np = of_find_compatible_node(NULL, NULL, "fsl,cpm2-pic");
-	if (np == NULL) {
-		printk(KERN_ERR "PIC init: can not find fsl,cpm2-pic node\n");
-		return;
-	}
-	irq = irq_of_parse_and_map(np, 0);
-
-	cpm2_pic_init(np);
-	of_node_put(np);
-	irq_set_chained_handler(irq, cpm2_cascade);
-#endif
+	mpc85xx_cpm2_pic_init();
 }
 
 #ifdef CONFIG_CPM2
@@ -215,22 +171,7 @@ static void ksi8560_show_cpuinfo(struct seq_file *m)
 	seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
 }
 
-static struct of_device_id __initdata of_bus_ids[] = {
-	{ .type = "soc", },
-	{ .type = "simple-bus", },
-	{ .name = "cpm", },
-	{ .name = "localbus", },
-	{ .compatible = "gianfar", },
-	{},
-};
-
-static int __init declare_of_platform_devices(void)
-{
-	of_platform_bus_probe(NULL, of_bus_ids, NULL);
-
-	return 0;
-}
-machine_device_initcall(ksi8560, declare_of_platform_devices);
+machine_device_initcall(ksi8560, mpc85xx_common_publish_devices);
 
 /*
  * Called very early, device-tree isn't unflattened
diff --git a/arch/powerpc/platforms/85xx/mpc8536_ds.c b/arch/powerpc/platforms/85xx/mpc8536_ds.c
index f79f2f10214..cf266826682 100644
--- a/arch/powerpc/platforms/85xx/mpc8536_ds.c
+++ b/arch/powerpc/platforms/85xx/mpc8536_ds.c
@@ -32,31 +32,15 @@
 #include <sysdev/fsl_soc.h>
 #include <sysdev/fsl_pci.h>
 
+#include "mpc85xx.h"
+
 void __init mpc8536_ds_pic_init(void)
 {
-	struct mpic *mpic;
-	struct resource r;
-	struct device_node *np;
-
-	np = of_find_node_by_type(NULL, "open-pic");
-	if (np == NULL) {
-		printk(KERN_ERR "Could not find open-pic node\n");
-		return;
-	}
-
-	if (of_address_to_resource(np, 0, &r)) {
-		printk(KERN_ERR "Failed to map mpic register space\n");
-		of_node_put(np);
-		return;
-	}
-
-	mpic = mpic_alloc(np, r.start,
-			  MPIC_PRIMARY | MPIC_WANTS_RESET |
+	struct mpic *mpic = mpic_alloc(NULL, 0,
+			  MPIC_WANTS_RESET |
 			  MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS,
 			0, 256, " OpenPIC  ");
 	BUG_ON(mpic == NULL);
-	of_node_put(np);
-
 	mpic_init(mpic);
 }
 
@@ -104,19 +88,7 @@ static void __init mpc8536_ds_setup_arch(void)
 	printk("MPC8536 DS board from Freescale Semiconductor\n");
 }
 
-static struct of_device_id __initdata mpc8536_ds_ids[] = {
-	{ .type = "soc", },
-	{ .compatible = "soc", },
-	{ .compatible = "simple-bus", },
-	{ .compatible = "gianfar", },
-	{},
-};
-
-static int __init mpc8536_ds_publish_devices(void)
-{
-	return of_platform_bus_probe(NULL, mpc8536_ds_ids, NULL);
-}
-machine_device_initcall(mpc8536_ds, mpc8536_ds_publish_devices);
+machine_device_initcall(mpc8536_ds, mpc85xx_common_publish_devices);
 
 machine_arch_initcall(mpc8536_ds, swiotlb_setup_bus_notifier);
 
diff --git a/arch/powerpc/platforms/85xx/mpc85xx.h b/arch/powerpc/platforms/85xx/mpc85xx.h
new file mode 100644
index 00000000000..2aa7c5dc2c7
--- /dev/null
+++ b/arch/powerpc/platforms/85xx/mpc85xx.h
@@ -0,0 +1,11 @@
+#ifndef MPC85xx_H
+#define MPC85xx_H
+extern int mpc85xx_common_publish_devices(void);
+
+#ifdef CONFIG_CPM2
+extern void mpc85xx_cpm2_pic_init(void);
+#else
+static inline void __init mpc85xx_cpm2_pic_init(void) {}
+#endif /* CONFIG_CPM2 */
+
+#endif
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ads.c b/arch/powerpc/platforms/85xx/mpc85xx_ads.c
index 3b2c9bb6619..3bebb5173bf 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_ads.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_ads.c
@@ -35,6 +35,8 @@
 #include <sysdev/cpm2_pic.h>
 #endif
 
+#include "mpc85xx.h"
+
 #ifdef CONFIG_PCI
 static int mpc85xx_exclude_device(struct pci_controller *hose,
 				   u_char bus, u_char devfn)
@@ -46,63 +48,15 @@ static int mpc85xx_exclude_device(struct pci_controller *hose,
 }
 #endif /* CONFIG_PCI */
 
-#ifdef CONFIG_CPM2
-
-static void cpm2_cascade(unsigned int irq, struct irq_desc *desc)
-{
-	struct irq_chip *chip = irq_desc_get_chip(desc);
-	int cascade_irq;
-
-	while ((cascade_irq = cpm2_get_irq()) >= 0)
-		generic_handle_irq(cascade_irq);
-
-	chip->irq_eoi(&desc->irq_data);
-}
-
-#endif /* CONFIG_CPM2 */
-
 static void __init mpc85xx_ads_pic_init(void)
 {
-	struct mpic *mpic;
-	struct resource r;
-	struct device_node *np = NULL;
-#ifdef CONFIG_CPM2
-	int irq;
-#endif
-
-	np = of_find_node_by_type(np, "open-pic");
-	if (!np) {
-		printk(KERN_ERR "Could not find open-pic node\n");
-		return;
-	}
-
-	if (of_address_to_resource(np, 0, &r)) {
-		printk(KERN_ERR "Could not map mpic register space\n");
-		of_node_put(np);
-		return;
-	}
-
-	mpic = mpic_alloc(np, r.start,
-			MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
+	struct mpic *mpic = mpic_alloc(NULL, 0,
+			MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
 			0, 256, " OpenPIC  ");
 	BUG_ON(mpic == NULL);
-	of_node_put(np);
-
 	mpic_init(mpic);
 
-#ifdef CONFIG_CPM2
-	/* Setup CPM2 PIC */
-	np = of_find_compatible_node(NULL, NULL, "fsl,cpm2-pic");
-	if (np == NULL) {
-		printk(KERN_ERR "PIC init: can not find fsl,cpm2-pic node\n");
-		return;
-	}
-	irq = irq_of_parse_and_map(np, 0);
-
-	cpm2_pic_init(np);
-	of_node_put(np);
-	irq_set_chained_handler(irq, cpm2_cascade);
-#endif
+	mpc85xx_cpm2_pic_init();
 }
 
 /*
@@ -221,23 +175,7 @@ static void mpc85xx_ads_show_cpuinfo(struct seq_file *m)
 	seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
 }
 
-static struct of_device_id __initdata of_bus_ids[] = {
-	{ .name = "soc", },
-	{ .type = "soc", },
-	{ .name = "cpm", },
-	{ .name = "localbus", },
-	{ .compatible = "simple-bus", },
-	{ .compatible = "gianfar", },
-	{},
-};
-
-static int __init declare_of_platform_devices(void)
-{
-	of_platform_bus_probe(NULL, of_bus_ids, NULL);
-
-	return 0;
-}
-machine_device_initcall(mpc85xx_ads, declare_of_platform_devices);
+machine_device_initcall(mpc85xx_ads, mpc85xx_common_publish_devices);
 
 /*
  * Called very early, device-tree isn't unflattened
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_cds.c b/arch/powerpc/platforms/85xx/mpc85xx_cds.c
index 66cb8d64079..40f03da616a 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_cds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_cds.c
@@ -46,6 +46,8 @@
 #include <sysdev/fsl_soc.h>
 #include <sysdev/fsl_pci.h>
 
+#include "mpc85xx.h"
+
 /* CADMUS info */
 /* xxx - galak, move into device tree */
 #define CADMUS_BASE (0xf8004000)
@@ -177,7 +179,7 @@ static irqreturn_t mpc85xx_8259_cascade_action(int irq, void *dev_id)
 
 static struct irqaction mpc85xxcds_8259_irqaction = {
 	.handler = mpc85xx_8259_cascade_action,
-	.flags = IRQF_SHARED,
+	.flags = IRQF_SHARED | IRQF_NO_THREAD,
 	.name = "8259 cascade",
 };
 #endif /* PPC_I8259 */
@@ -186,30 +188,10 @@ static struct irqaction mpc85xxcds_8259_irqaction = {
 static void __init mpc85xx_cds_pic_init(void)
 {
 	struct mpic *mpic;
-	struct resource r;
-	struct device_node *np = NULL;
-
-	np = of_find_node_by_type(np, "open-pic");
-
-	if (np == NULL) {
-		printk(KERN_ERR "Could not find open-pic node\n");
-		return;
-	}
-
-	if (of_address_to_resource(np, 0, &r)) {
-		printk(KERN_ERR "Failed to map mpic register space\n");
-		of_node_put(np);
-		return;
-	}
-
-	mpic = mpic_alloc(np, r.start,
-			MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
+	mpic = mpic_alloc(NULL, 0,
+			MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
 			0, 256, " OpenPIC  ");
 	BUG_ON(mpic == NULL);
-
-	/* Return the mpic node */
-	of_node_put(np);
-
 	mpic_init(mpic);
 }
 
@@ -330,19 +312,7 @@ static int __init mpc85xx_cds_probe(void)
         return of_flat_dt_is_compatible(root, "MPC85xxCDS");
 }
 
-static struct of_device_id __initdata of_bus_ids[] = {
-	{ .type = "soc", },
-	{ .compatible = "soc", },
-	{ .compatible = "simple-bus", },
-	{ .compatible = "gianfar", },
-	{},
-};
-
-static int __init declare_of_platform_devices(void)
-{
-	return of_platform_bus_probe(NULL, of_bus_ids, NULL);
-}
-machine_device_initcall(mpc85xx_cds, declare_of_platform_devices);
+machine_device_initcall(mpc85xx_cds, mpc85xx_common_publish_devices);
 
 define_machine(mpc85xx_cds) {
 	.name		= "MPC85xx CDS",
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ds.c b/arch/powerpc/platforms/85xx/mpc85xx_ds.c
index 1b9a8cf1873..eefbb91e1d6 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_ds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_ds.c
@@ -35,6 +35,9 @@
 
 #include <sysdev/fsl_soc.h>
 #include <sysdev/fsl_pci.h>
+#include "smp.h"
+
+#include "mpc85xx.h"
 
 #undef DEBUG
 
@@ -60,43 +63,27 @@ static void mpc85xx_8259_cascade(unsigned int irq, struct irq_desc *desc)
 void __init mpc85xx_ds_pic_init(void)
 {
 	struct mpic *mpic;
-	struct resource r;
-	struct device_node *np;
 #ifdef CONFIG_PPC_I8259
+	struct device_node *np;
 	struct device_node *cascade_node = NULL;
 	int cascade_irq;
 #endif
 	unsigned long root = of_get_flat_dt_root();
 
-	np = of_find_node_by_type(NULL, "open-pic");
-	if (np == NULL) {
-		printk(KERN_ERR "Could not find open-pic node\n");
-		return;
-	}
-
-	if (of_address_to_resource(np, 0, &r)) {
-		printk(KERN_ERR "Failed to map mpic register space\n");
-		of_node_put(np);
-		return;
-	}
-
 	if (of_flat_dt_is_compatible(root, "fsl,MPC8572DS-CAMP")) {
-		mpic = mpic_alloc(np, r.start,
-			MPIC_PRIMARY |
+		mpic = mpic_alloc(NULL, 0,
 			MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS |
 			MPIC_SINGLE_DEST_CPU,
 			0, 256, " OpenPIC  ");
 	} else {
-		mpic = mpic_alloc(np, r.start,
-			  MPIC_PRIMARY | MPIC_WANTS_RESET |
+		mpic = mpic_alloc(NULL, 0,
+			  MPIC_WANTS_RESET |
 			  MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS |
 			  MPIC_SINGLE_DEST_CPU,
 			0, 256, " OpenPIC  ");
 	}
 
 	BUG_ON(mpic == NULL);
-	of_node_put(np);
-
 	mpic_init(mpic);
 
 #ifdef CONFIG_PPC_I8259
@@ -152,9 +139,6 @@ static int mpc85xx_exclude_device(struct pci_controller *hose,
 /*
  * Setup the architecture
  */
-#ifdef CONFIG_SMP
-extern void __init mpc85xx_smp_init(void);
-#endif
 static void __init mpc85xx_ds_setup_arch(void)
 {
 #ifdef CONFIG_PCI
@@ -187,9 +171,7 @@ static void __init mpc85xx_ds_setup_arch(void)
 	ppc_md.pci_exclude_device = mpc85xx_exclude_device;
 #endif
 
-#ifdef CONFIG_SMP
 	mpc85xx_smp_init();
-#endif
 
 #ifdef CONFIG_SWIOTLB
 	if (memblock_end_of_DRAM() > max) {
@@ -219,21 +201,9 @@ static int __init mpc8544_ds_probe(void)
 	return 0;
 }
 
-static struct of_device_id __initdata mpc85xxds_ids[] = {
-	{ .type = "soc", },
-	{ .compatible = "soc", },
-	{ .compatible = "simple-bus", },
-	{ .compatible = "gianfar", },
-	{},
-};
-
-static int __init mpc85xxds_publish_devices(void)
-{
-	return of_platform_bus_probe(NULL, mpc85xxds_ids, NULL);
-}
-machine_device_initcall(mpc8544_ds, mpc85xxds_publish_devices);
-machine_device_initcall(mpc8572_ds, mpc85xxds_publish_devices);
-machine_device_initcall(p2020_ds, mpc85xxds_publish_devices);
+machine_device_initcall(mpc8544_ds, mpc85xx_common_publish_devices);
+machine_device_initcall(mpc8572_ds, mpc85xx_common_publish_devices);
+machine_device_initcall(p2020_ds, mpc85xx_common_publish_devices);
 
 machine_arch_initcall(mpc8544_ds, swiotlb_setup_bus_notifier);
 machine_arch_initcall(mpc8572_ds, swiotlb_setup_bus_notifier);
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
index a23a3ff634c..1d15a0cd2c8 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
@@ -51,6 +51,9 @@
 #include <asm/qe_ic.h>
 #include <asm/mpic.h>
 #include <asm/swiotlb.h>
+#include "smp.h"
+
+#include "mpc85xx.h"
 
 #undef DEBUG
 #ifdef DEBUG
@@ -153,30 +156,7 @@ static int mpc8568_mds_phy_fixups(struct phy_device *phydev)
  * Setup the architecture
  *
  */
-#ifdef CONFIG_SMP
-extern void __init mpc85xx_smp_init(void);
-#endif
-
 #ifdef CONFIG_QUICC_ENGINE
-static struct of_device_id mpc85xx_qe_ids[] __initdata = {
-	{ .type = "qe", },
-	{ .compatible = "fsl,qe", },
-	{ },
-};
-
-static void __init mpc85xx_publish_qe_devices(void)
-{
-	struct device_node *np;
-
-	np = of_find_compatible_node(NULL, NULL, "fsl,qe");
-	if (!of_device_is_available(np)) {
-		of_node_put(np);
-		return;
-	}
-
-	of_platform_bus_probe(NULL, mpc85xx_qe_ids, NULL);
-}
-
 static void __init mpc85xx_mds_reset_ucc_phys(void)
 {
 	struct device_node *np;
@@ -347,7 +327,6 @@ static void __init mpc85xx_mds_qeic_init(void)
 	of_node_put(np);
 }
 #else
-static void __init mpc85xx_publish_qe_devices(void) { }
 static void __init mpc85xx_mds_qe_init(void) { }
 static void __init mpc85xx_mds_qeic_init(void) { }
 #endif	/* CONFIG_QUICC_ENGINE */
@@ -381,9 +360,7 @@ static void __init mpc85xx_mds_setup_arch(void)
 	}
 #endif
 
-#ifdef CONFIG_SMP
 	mpc85xx_smp_init();
-#endif
 
 	mpc85xx_mds_qe_init();
 
@@ -429,24 +406,11 @@ machine_arch_initcall(mpc8568_mds, board_fixups);
 machine_arch_initcall(mpc8569_mds, board_fixups);
 
 static struct of_device_id mpc85xx_ids[] = {
-	{ .type = "soc", },
-	{ .compatible = "soc", },
-	{ .compatible = "simple-bus", },
-	{ .compatible = "gianfar", },
-	{ .compatible = "fsl,rapidio-delta", },
 	{ .compatible = "fsl,mpc8548-guts", },
 	{ .compatible = "gpio-leds", },
 	{},
 };
 
-static struct of_device_id p1021_ids[] = {
-	{ .type = "soc", },
-	{ .compatible = "soc", },
-	{ .compatible = "simple-bus", },
-	{ .compatible = "gianfar", },
-	{},
-};
-
 static int __init mpc85xx_publish_devices(void)
 {
 	if (machine_is(mpc8568_mds))
@@ -454,23 +418,15 @@ static int __init mpc85xx_publish_devices(void)
 	if (machine_is(mpc8569_mds))
 		simple_gpiochip_init("fsl,mpc8569mds-bcsr-gpio");
 
+	mpc85xx_common_publish_devices();
 	of_platform_bus_probe(NULL, mpc85xx_ids, NULL);
-	mpc85xx_publish_qe_devices();
-
-	return 0;
-}
-
-static int __init p1021_publish_devices(void)
-{
-	of_platform_bus_probe(NULL, p1021_ids, NULL);
-	mpc85xx_publish_qe_devices();
 
 	return 0;
 }
 
 machine_device_initcall(mpc8568_mds, mpc85xx_publish_devices);
 machine_device_initcall(mpc8569_mds, mpc85xx_publish_devices);
-machine_device_initcall(p1021_mds, p1021_publish_devices);
+machine_device_initcall(p1021_mds, mpc85xx_common_publish_devices);
 
 machine_arch_initcall(mpc8568_mds, swiotlb_setup_bus_notifier);
 machine_arch_initcall(mpc8569_mds, swiotlb_setup_bus_notifier);
@@ -478,26 +434,11 @@ machine_arch_initcall(p1021_mds, swiotlb_setup_bus_notifier);
 
 static void __init mpc85xx_mds_pic_init(void)
 {
-	struct mpic *mpic;
-	struct resource r;
-	struct device_node *np = NULL;
-
-	np = of_find_node_by_type(NULL, "open-pic");
-	if (!np)
-		return;
-
-	if (of_address_to_resource(np, 0, &r)) {
-		printk(KERN_ERR "Failed to map mpic register space\n");
-		of_node_put(np);
-		return;
-	}
-
-	mpic = mpic_alloc(np, r.start,
-			MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN |
+	struct mpic *mpic = mpic_alloc(NULL, 0,
+			MPIC_WANTS_RESET | MPIC_BIG_ENDIAN |
 			MPIC_BROKEN_FRR_NIRQS | MPIC_SINGLE_DEST_CPU,
 			0, 256, " OpenPIC  ");
 	BUG_ON(mpic == NULL);
-	of_node_put(np);
 
 	mpic_init(mpic);
 	mpc85xx_mds_qeic_init();
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_rdb.c b/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
index f5ff9110c97..ccf520e890b 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
@@ -29,6 +29,9 @@
 
 #include <sysdev/fsl_soc.h>
 #include <sysdev/fsl_pci.h>
+#include "smp.h"
+
+#include "mpc85xx.h"
 
 #undef DEBUG
 
@@ -42,49 +45,28 @@
 void __init mpc85xx_rdb_pic_init(void)
 {
 	struct mpic *mpic;
-	struct resource r;
-	struct device_node *np;
 	unsigned long root = of_get_flat_dt_root();
 
-	np = of_find_node_by_type(NULL, "open-pic");
-	if (np == NULL) {
-		printk(KERN_ERR "Could not find open-pic node\n");
-		return;
-	}
-
-	if (of_address_to_resource(np, 0, &r)) {
-		printk(KERN_ERR "Failed to map mpic register space\n");
-		of_node_put(np);
-		return;
-	}
-
 	if (of_flat_dt_is_compatible(root, "fsl,MPC85XXRDB-CAMP")) {
-		mpic = mpic_alloc(np, r.start,
-			MPIC_PRIMARY |
+		mpic = mpic_alloc(NULL, 0,
 			MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS |
 			MPIC_SINGLE_DEST_CPU,
 			0, 256, " OpenPIC  ");
 	} else {
-		mpic = mpic_alloc(np, r.start,
-		  MPIC_PRIMARY | MPIC_WANTS_RESET |
+		mpic = mpic_alloc(NULL, 0,
+		  MPIC_WANTS_RESET |
 		  MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS |
 		  MPIC_SINGLE_DEST_CPU,
 		  0, 256, " OpenPIC  ");
 	}
 
 	BUG_ON(mpic == NULL);
-	of_node_put(np);
-
 	mpic_init(mpic);
-
 }
 
 /*
  * Setup the architecture
  */
-#ifdef CONFIG_SMP
-extern void __init mpc85xx_smp_init(void);
-#endif
 static void __init mpc85xx_rdb_setup_arch(void)
 {
 #ifdef CONFIG_PCI
@@ -102,27 +84,12 @@ static void __init mpc85xx_rdb_setup_arch(void)
 
 #endif
 
-#ifdef CONFIG_SMP
 	mpc85xx_smp_init();
-#endif
-
 	printk(KERN_INFO "MPC85xx RDB board from Freescale Semiconductor\n");
 }
 
-static struct of_device_id __initdata mpc85xxrdb_ids[] = {
-	{ .type = "soc", },
-	{ .compatible = "soc", },
-	{ .compatible = "simple-bus", },
-	{ .compatible = "gianfar", },
-	{},
-};
-
-static int __init mpc85xxrdb_publish_devices(void)
-{
-	return of_platform_bus_probe(NULL, mpc85xxrdb_ids, NULL);
-}
-machine_device_initcall(p2020_rdb, mpc85xxrdb_publish_devices);
-machine_device_initcall(p1020_rdb, mpc85xxrdb_publish_devices);
+machine_device_initcall(p2020_rdb, mpc85xx_common_publish_devices);
+machine_device_initcall(p1020_rdb, mpc85xx_common_publish_devices);
 
 /*
  * Called very early, device-tree isn't unflattened
diff --git a/arch/powerpc/platforms/85xx/p1010rdb.c b/arch/powerpc/platforms/85xx/p1010rdb.c
index d7387fa7f53..538bc3f57e9 100644
--- a/arch/powerpc/platforms/85xx/p1010rdb.c
+++ b/arch/powerpc/platforms/85xx/p1010rdb.c
@@ -28,33 +28,18 @@
 #include <sysdev/fsl_soc.h>
 #include <sysdev/fsl_pci.h>
 
+#include "mpc85xx.h"
+
 void __init p1010_rdb_pic_init(void)
 {
-	struct mpic *mpic;
-	struct resource r;
-	struct device_node *np;
-
-	np = of_find_node_by_type(NULL, "open-pic");
-	if (np == NULL) {
-		printk(KERN_ERR "Could not find open-pic node\n");
-		return;
-	}
-
-	if (of_address_to_resource(np, 0, &r)) {
-		printk(KERN_ERR "Failed to map mpic register space\n");
-		of_node_put(np);
-		return;
-	}
-
-	mpic = mpic_alloc(np, r.start, MPIC_PRIMARY | MPIC_WANTS_RESET |
-	  MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS | MPIC_SINGLE_DEST_CPU,
+	struct mpic *mpic = mpic_alloc(NULL, 0,
+	  MPIC_WANTS_RESET | MPIC_BIG_ENDIAN |
+	  MPIC_BROKEN_FRR_NIRQS | MPIC_SINGLE_DEST_CPU,
 	  0, 256, " OpenPIC  ");
 
 	BUG_ON(mpic == NULL);
-	of_node_put(np);
 
 	mpic_init(mpic);
-
 }
 
 
@@ -81,18 +66,7 @@ static void __init p1010_rdb_setup_arch(void)
 	printk(KERN_INFO "P1010 RDB board from Freescale Semiconductor\n");
 }
 
-static struct of_device_id __initdata p1010rdb_ids[] = {
-	{ .type = "soc", },
-	{ .compatible = "soc", },
-	{ .compatible = "simple-bus", },
-	{},
-};
-
-static int __init p1010rdb_publish_devices(void)
-{
-	return of_platform_bus_probe(NULL, p1010rdb_ids, NULL);
-}
-machine_device_initcall(p1010_rdb, p1010rdb_publish_devices);
+machine_device_initcall(p1010_rdb, mpc85xx_common_publish_devices);
 machine_arch_initcall(p1010_rdb, swiotlb_setup_bus_notifier);
 
 /*
diff --git a/arch/powerpc/platforms/85xx/p1022_ds.c b/arch/powerpc/platforms/85xx/p1022_ds.c
index fda15716fad..bb3d84f4046 100644
--- a/arch/powerpc/platforms/85xx/p1022_ds.c
+++ b/arch/powerpc/platforms/85xx/p1022_ds.c
@@ -26,6 +26,9 @@
 #include <sysdev/fsl_soc.h>
 #include <sysdev/fsl_pci.h>
 #include <asm/fsl_guts.h>
+#include "smp.h"
+
+#include "mpc85xx.h"
 
 #if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE)
 
@@ -238,38 +241,15 @@ p1022ds_valid_monitor_port(enum fsl_diu_monitor_port port)
 
 void __init p1022_ds_pic_init(void)
 {
-	struct mpic *mpic;
-	struct resource r;
-	struct device_node *np;
-
-	np = of_find_node_by_type(NULL, "open-pic");
-	if (!np) {
-		pr_err("Could not find open-pic node\n");
-		return;
-	}
-
-	if (of_address_to_resource(np, 0, &r)) {
-		pr_err("Failed to map mpic register space\n");
-		of_node_put(np);
-		return;
-	}
-
-	mpic = mpic_alloc(np, r.start,
-		MPIC_PRIMARY | MPIC_WANTS_RESET |
+	struct mpic *mpic = mpic_alloc(NULL, 0,
+		MPIC_WANTS_RESET |
 		MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS |
 		MPIC_SINGLE_DEST_CPU,
 		0, 256, " OpenPIC  ");
-
 	BUG_ON(mpic == NULL);
-	of_node_put(np);
-
 	mpic_init(mpic);
 }
 
-#ifdef CONFIG_SMP
-void __init mpc85xx_smp_init(void);
-#endif
-
 /*
  * Setup the architecture
  */
@@ -309,9 +289,7 @@ static void __init p1022_ds_setup_arch(void)
 	diu_ops.valid_monitor_port	= p1022ds_valid_monitor_port;
 #endif
 
-#ifdef CONFIG_SMP
 	mpc85xx_smp_init();
-#endif
 
 #ifdef CONFIG_SWIOTLB
 	if (memblock_end_of_DRAM() > max) {
@@ -325,10 +303,6 @@ static void __init p1022_ds_setup_arch(void)
 }
 
 static struct of_device_id __initdata p1022_ds_ids[] = {
-	{ .type = "soc", },
-	{ .compatible = "soc", },
-	{ .compatible = "simple-bus", },
-	{ .compatible = "gianfar", },
 	/* So that the DMA channel nodes can be probed individually: */
 	{ .compatible = "fsl,eloplus-dma", },
 	{},
@@ -336,6 +310,7 @@ static struct of_device_id __initdata p1022_ds_ids[] = {
 
 static int __init p1022_ds_publish_devices(void)
 {
+	mpc85xx_common_publish_devices();
 	return of_platform_bus_probe(NULL, p1022_ds_ids, NULL);
 }
 machine_device_initcall(p1022_ds, p1022_ds_publish_devices);
diff --git a/arch/powerpc/platforms/85xx/p1023_rds.c b/arch/powerpc/platforms/85xx/p1023_rds.c
index 835e0b335bf..d951e7027bb 100644
--- a/arch/powerpc/platforms/85xx/p1023_rds.c
+++ b/arch/powerpc/platforms/85xx/p1023_rds.c
@@ -30,19 +30,18 @@
 #include <asm/prom.h>
 #include <asm/udbg.h>
 #include <asm/mpic.h>
+#include "smp.h"
 
 #include <sysdev/fsl_soc.h>
 #include <sysdev/fsl_pci.h>
 
+#include "mpc85xx.h"
+
 /* ************************************************************************
  *
  * Setup the architecture
  *
  */
-#ifdef CONFIG_SMP
-void __init mpc85xx_smp_init(void);
-#endif
-
 static void __init mpc85xx_rds_setup_arch(void)
 {
 	struct device_node *np;
@@ -87,53 +86,19 @@ static void __init mpc85xx_rds_setup_arch(void)
 		fsl_add_bridge(np, 0);
 #endif
 
-#ifdef CONFIG_SMP
 	mpc85xx_smp_init();
-#endif
-}
-
-static struct of_device_id p1023_ids[] = {
-	{ .type = "soc", },
-	{ .compatible = "soc", },
-	{ .compatible = "simple-bus", },
-	{},
-};
-
-
-static int __init p1023_publish_devices(void)
-{
-	of_platform_bus_probe(NULL, p1023_ids, NULL);
-
-	return 0;
 }
 
-machine_device_initcall(p1023_rds, p1023_publish_devices);
+machine_device_initcall(p1023_rds, mpc85xx_common_publish_devices);
 
 static void __init mpc85xx_rds_pic_init(void)
 {
-	struct mpic *mpic;
-	struct resource r;
-	struct device_node *np = NULL;
-
-	np = of_find_node_by_type(NULL, "open-pic");
-	if (!np) {
-		printk(KERN_ERR "Could not find open-pic node\n");
-		return;
-	}
-
-	if (of_address_to_resource(np, 0, &r)) {
-		printk(KERN_ERR "Failed to map mpic register space\n");
-		of_node_put(np);
-		return;
-	}
-
-	mpic = mpic_alloc(np, r.start,
-		MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN |
+	struct mpic *mpic = mpic_alloc(NULL, 0,
+		MPIC_WANTS_RESET | MPIC_BIG_ENDIAN |
 		MPIC_BROKEN_FRR_NIRQS | MPIC_SINGLE_DEST_CPU,
 		0, 256, " OpenPIC  ");
 
 	BUG_ON(mpic == NULL);
-	of_node_put(np);
 
 	mpic_init(mpic);
 }
diff --git a/arch/powerpc/platforms/85xx/sbc8548.c b/arch/powerpc/platforms/85xx/sbc8548.c
index 14632a97122..184a5078461 100644
--- a/arch/powerpc/platforms/85xx/sbc8548.c
+++ b/arch/powerpc/platforms/85xx/sbc8548.c
@@ -48,35 +48,16 @@
 #include <sysdev/fsl_soc.h>
 #include <sysdev/fsl_pci.h>
 
+#include "mpc85xx.h"
+
 static int sbc_rev;
 
 static void __init sbc8548_pic_init(void)
 {
-	struct mpic *mpic;
-	struct resource r;
-	struct device_node *np = NULL;
-
-	np = of_find_node_by_type(np, "open-pic");
-
-	if (np == NULL) {
-		printk(KERN_ERR "Could not find open-pic node\n");
-		return;
-	}
-
-	if (of_address_to_resource(np, 0, &r)) {
-		printk(KERN_ERR "Failed to map mpic register space\n");
-		of_node_put(np);
-		return;
-	}
-
-	mpic = mpic_alloc(np, r.start,
-			MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
+	struct mpic *mpic = mpic_alloc(NULL, 0,
+			MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
 			0, 256, " OpenPIC  ");
 	BUG_ON(mpic == NULL);
-
-	/* Return the mpic node */
-	of_node_put(np);
-
 	mpic_init(mpic);
 }
 
@@ -149,21 +130,7 @@ static void sbc8548_show_cpuinfo(struct seq_file *m)
 	seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
 }
 
-static struct of_device_id __initdata of_bus_ids[] = {
-	{ .name = "soc", },
-	{ .type = "soc", },
-	{ .compatible = "simple-bus", },
-	{ .compatible = "gianfar", },
-	{},
-};
-
-static int __init declare_of_platform_devices(void)
-{
-	of_platform_bus_probe(NULL, of_bus_ids, NULL);
-
-	return 0;
-}
-machine_device_initcall(sbc8548, declare_of_platform_devices);
+machine_device_initcall(sbc8548, mpc85xx_common_publish_devices);
 
 /*
  * Called very early, device-tree isn't unflattened
diff --git a/arch/powerpc/platforms/85xx/sbc8560.c b/arch/powerpc/platforms/85xx/sbc8560.c
index cebd786dc33..940752e9305 100644
--- a/arch/powerpc/platforms/85xx/sbc8560.c
+++ b/arch/powerpc/platforms/85xx/sbc8560.c
@@ -32,68 +32,22 @@
 #include <sysdev/fsl_soc.h>
 #include <sysdev/fsl_pci.h>
 
+#include "mpc85xx.h"
+
 #ifdef CONFIG_CPM2
 #include <asm/cpm2.h>
 #include <sysdev/cpm2_pic.h>
 #endif
 
-#ifdef CONFIG_CPM2
-
-static void cpm2_cascade(unsigned int irq, struct irq_desc *desc)
-{
-	struct irq_chip *chip = irq_desc_get_chip(desc);
-	int cascade_irq;
-
-	while ((cascade_irq = cpm2_get_irq()) >= 0)
-		generic_handle_irq(cascade_irq);
-
-	chip->irq_eoi(&desc->irq_data);
-}
-
-#endif /* CONFIG_CPM2 */
-
 static void __init sbc8560_pic_init(void)
 {
-	struct mpic *mpic;
-	struct resource r;
-	struct device_node *np = NULL;
-#ifdef CONFIG_CPM2
-	int irq;
-#endif
-
-	np = of_find_node_by_type(np, "open-pic");
-	if (!np) {
-		printk(KERN_ERR "Could not find open-pic node\n");
-		return;
-	}
-
-	if (of_address_to_resource(np, 0, &r)) {
-		printk(KERN_ERR "Could not map mpic register space\n");
-		of_node_put(np);
-		return;
-	}
-
-	mpic = mpic_alloc(np, r.start,
-			MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
+	struct mpic *mpic = mpic_alloc(NULL, 0,
+			MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
 			0, 256, " OpenPIC  ");
 	BUG_ON(mpic == NULL);
-	of_node_put(np);
-
 	mpic_init(mpic);
 
-#ifdef CONFIG_CPM2
-	/* Setup CPM2 PIC */
-	np = of_find_compatible_node(NULL, NULL, "fsl,cpm2-pic");
-	if (np == NULL) {
-		printk(KERN_ERR "PIC init: can not find fsl,cpm2-pic node\n");
-		return;
-	}
-	irq = irq_of_parse_and_map(np, 0);
-
-	cpm2_pic_init(np);
-	of_node_put(np);
-	irq_set_chained_handler(irq, cpm2_cascade);
-#endif
+	mpc85xx_cpm2_pic_init();
 }
 
 /*
@@ -208,23 +162,7 @@ static void sbc8560_show_cpuinfo(struct seq_file *m)
 	seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
 }
 
-static struct of_device_id __initdata of_bus_ids[] = {
-	{ .name = "soc", },
-	{ .type = "soc", },
-	{ .name = "cpm", },
-	{ .name = "localbus", },
-	{ .compatible = "simple-bus", },
-	{ .compatible = "gianfar", },
-	{},
-};
-
-static int __init declare_of_platform_devices(void)
-{
-	of_platform_bus_probe(NULL, of_bus_ids, NULL);
-
-	return 0;
-}
-machine_device_initcall(sbc8560, declare_of_platform_devices);
+machine_device_initcall(sbc8560, mpc85xx_common_publish_devices);
 
 /*
  * Called very early, device-tree isn't unflattened
diff --git a/arch/powerpc/platforms/85xx/smp.c b/arch/powerpc/platforms/85xx/smp.c
index 2df4785ffd4..ff4249044a3 100644
--- a/arch/powerpc/platforms/85xx/smp.c
+++ b/arch/powerpc/platforms/85xx/smp.c
@@ -27,6 +27,7 @@
 
 #include <sysdev/fsl_soc.h>
 #include <sysdev/mpic.h>
+#include "smp.h"
 
 extern void __early_start(void);
 
diff --git a/arch/powerpc/platforms/85xx/smp.h b/arch/powerpc/platforms/85xx/smp.h
new file mode 100644
index 00000000000..e2b44933ff1
--- /dev/null
+++ b/arch/powerpc/platforms/85xx/smp.h
@@ -0,0 +1,15 @@
+#ifndef POWERPC_85XX_SMP_H_
+#define POWERPC_85XX_SMP_H_ 1
+
+#include <linux/init.h>
+
+#ifdef CONFIG_SMP
+void __init mpc85xx_smp_init(void);
+#else
+static inline void mpc85xx_smp_init(void)
+{
+	/* Nothing to do */
+}
+#endif
+
+#endif /* not POWERPC_85XX_SMP_H_ */
diff --git a/arch/powerpc/platforms/85xx/socrates.c b/arch/powerpc/platforms/85xx/socrates.c
index 747d8fb3ab8..18f635906b2 100644
--- a/arch/powerpc/platforms/85xx/socrates.c
+++ b/arch/powerpc/platforms/85xx/socrates.c
@@ -41,32 +41,17 @@
 #include <sysdev/fsl_soc.h>
 #include <sysdev/fsl_pci.h>
 
+#include "mpc85xx.h"
 #include "socrates_fpga_pic.h"
 
 static void __init socrates_pic_init(void)
 {
-	struct mpic *mpic;
-	struct resource r;
 	struct device_node *np;
 
-	np = of_find_node_by_type(NULL, "open-pic");
-	if (!np) {
-		printk(KERN_ERR "Could not find open-pic node\n");
-		return;
-	}
-
-	if (of_address_to_resource(np, 0, &r)) {
-		printk(KERN_ERR "Could not map mpic register space\n");
-		of_node_put(np);
-		return;
-	}
-
-	mpic = mpic_alloc(np, r.start,
-			MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
+	struct mpic *mpic = mpic_alloc(NULL, 0,
+			MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
 			0, 256, " OpenPIC  ");
 	BUG_ON(mpic == NULL);
-	of_node_put(np);
-
 	mpic_init(mpic);
 
 	np = of_find_compatible_node(NULL, NULL, "abb,socrates-fpga-pic");
@@ -96,17 +81,7 @@ static void __init socrates_setup_arch(void)
 #endif
 }
 
-static struct of_device_id __initdata socrates_of_bus_ids[] = {
-	{ .compatible = "simple-bus", },
-	{ .compatible = "gianfar", },
-	{},
-};
-
-static int __init socrates_publish_devices(void)
-{
-	return of_platform_bus_probe(NULL, socrates_of_bus_ids, NULL);
-}
-machine_device_initcall(socrates, socrates_publish_devices);
+machine_device_initcall(socrates, mpc85xx_common_publish_devices);
 
 /*
  * Called very early, device-tree isn't unflattened
diff --git a/arch/powerpc/platforms/85xx/stx_gp3.c b/arch/powerpc/platforms/85xx/stx_gp3.c
index 5387e9f06bd..e9e5234b4e7 100644
--- a/arch/powerpc/platforms/85xx/stx_gp3.c
+++ b/arch/powerpc/platforms/85xx/stx_gp3.c
@@ -40,70 +40,21 @@
 #include <sysdev/fsl_soc.h>
 #include <sysdev/fsl_pci.h>
 
+#include "mpc85xx.h"
+
 #ifdef CONFIG_CPM2
 #include <asm/cpm2.h>
-#include <sysdev/cpm2_pic.h>
-
-static void cpm2_cascade(unsigned int irq, struct irq_desc *desc)
-{
-	struct irq_chip *chip = irq_desc_get_chip(desc);
-	int cascade_irq;
-
-	while ((cascade_irq = cpm2_get_irq()) >= 0)
-		generic_handle_irq(cascade_irq);
-
-	chip->irq_eoi(&desc->irq_data);
-}
 #endif /* CONFIG_CPM2 */
 
 static void __init stx_gp3_pic_init(void)
 {
-	struct mpic *mpic;
-	struct resource r;
-	struct device_node *np;
-#ifdef CONFIG_CPM2
-	int irq;
-#endif
-
-	np = of_find_node_by_type(NULL, "open-pic");
-	if (!np) {
-		printk(KERN_ERR "Could not find open-pic node\n");
-		return;
-	}
-
-	if (of_address_to_resource(np, 0, &r)) {
-		printk(KERN_ERR "Could not map mpic register space\n");
-		of_node_put(np);
-		return;
-	}
-
-	mpic = mpic_alloc(np, r.start,
-			MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
+	struct mpic *mpic = mpic_alloc(NULL, 0,
+			MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
 			0, 256, " OpenPIC  ");
 	BUG_ON(mpic == NULL);
-	of_node_put(np);
-
 	mpic_init(mpic);
 
-#ifdef CONFIG_CPM2
-	/* Setup CPM2 PIC */
-	np = of_find_compatible_node(NULL, NULL, "fsl,cpm2-pic");
-	if (np == NULL) {
-		printk(KERN_ERR "PIC init: can not find fsl,cpm2-pic node\n");
-		return;
-	}
-	irq = irq_of_parse_and_map(np, 0);
-
-	if (irq == NO_IRQ) {
-		of_node_put(np);
-		printk(KERN_ERR "PIC init: got no IRQ for cpm cascade\n");
-		return;
-	}
-
-	cpm2_pic_init(np);
-	of_node_put(np);
-	irq_set_chained_handler(irq, cpm2_cascade);
-#endif
+	mpc85xx_cpm2_pic_init();
 }
 
 /*
@@ -144,19 +95,7 @@ static void stx_gp3_show_cpuinfo(struct seq_file *m)
 	seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
 }
 
-static struct of_device_id __initdata of_bus_ids[] = {
-	{ .compatible = "simple-bus", },
-	{ .compatible = "gianfar", },
-	{},
-};
-
-static int __init declare_of_platform_devices(void)
-{
-	of_platform_bus_probe(NULL, of_bus_ids, NULL);
-
-	return 0;
-}
-machine_device_initcall(stx_gp3, declare_of_platform_devices);
+machine_device_initcall(stx_gp3, mpc85xx_common_publish_devices);
 
 /*
  * Called very early, device-tree isn't unflattened
diff --git a/arch/powerpc/platforms/85xx/tqm85xx.c b/arch/powerpc/platforms/85xx/tqm85xx.c
index 325de772725..bf7c89fb75b 100644
--- a/arch/powerpc/platforms/85xx/tqm85xx.c
+++ b/arch/powerpc/platforms/85xx/tqm85xx.c
@@ -38,70 +38,21 @@
 #include <sysdev/fsl_soc.h>
 #include <sysdev/fsl_pci.h>
 
+#include "mpc85xx.h"
+
 #ifdef CONFIG_CPM2
 #include <asm/cpm2.h>
-#include <sysdev/cpm2_pic.h>
-
-static void cpm2_cascade(unsigned int irq, struct irq_desc *desc)
-{
-	struct irq_chip *chip = irq_desc_get_chip(desc);
-	int cascade_irq;
-
-	while ((cascade_irq = cpm2_get_irq()) >= 0)
-		generic_handle_irq(cascade_irq);
-
-	chip->irq_eoi(&desc->irq_data);
-}
 #endif /* CONFIG_CPM2 */
 
 static void __init tqm85xx_pic_init(void)
 {
-	struct mpic *mpic;
-	struct resource r;
-	struct device_node *np;
-#ifdef CONFIG_CPM2
-	int irq;
-#endif
-
-	np = of_find_node_by_type(NULL, "open-pic");
-	if (!np) {
-		printk(KERN_ERR "Could not find open-pic node\n");
-		return;
-	}
-
-	if (of_address_to_resource(np, 0, &r)) {
-		printk(KERN_ERR "Could not map mpic register space\n");
-		of_node_put(np);
-		return;
-	}
-
-	mpic = mpic_alloc(np, r.start,
-			MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
+	struct mpic *mpic = mpic_alloc(NULL, 0,
+			MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
 			0, 256, " OpenPIC  ");
 	BUG_ON(mpic == NULL);
-	of_node_put(np);
-
 	mpic_init(mpic);
 
-#ifdef CONFIG_CPM2
-	/* Setup CPM2 PIC */
-	np = of_find_compatible_node(NULL, NULL, "fsl,cpm2-pic");
-	if (np == NULL) {
-		printk(KERN_ERR "PIC init: can not find fsl,cpm2-pic node\n");
-		return;
-	}
-	irq = irq_of_parse_and_map(np, 0);
-
-	if (irq == NO_IRQ) {
-		of_node_put(np);
-		printk(KERN_ERR "PIC init: got no IRQ for cpm cascade\n");
-		return;
-	}
-
-	cpm2_pic_init(np);
-	of_node_put(np);
-	irq_set_chained_handler(irq, cpm2_cascade);
-#endif
+	mpc85xx_cpm2_pic_init();
 }
 
 /*
@@ -173,19 +124,7 @@ static void __init tqm85xx_ti1520_fixup(struct pci_dev *pdev)
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1520,
 		tqm85xx_ti1520_fixup);
 
-static struct of_device_id __initdata of_bus_ids[] = {
-	{ .compatible = "simple-bus", },
-	{ .compatible = "gianfar", },
-	{},
-};
-
-static int __init declare_of_platform_devices(void)
-{
-	of_platform_bus_probe(NULL, of_bus_ids, NULL);
-
-	return 0;
-}
-machine_device_initcall(tqm85xx, declare_of_platform_devices);
+machine_device_initcall(tqm85xx, mpc85xx_common_publish_devices);
 
 static const char *board[] __initdata = {
 	"tqc,tqm8540",
diff --git a/arch/powerpc/platforms/85xx/xes_mpc85xx.c b/arch/powerpc/platforms/85xx/xes_mpc85xx.c
index a9dc5e79512..3a69f8b77de 100644
--- a/arch/powerpc/platforms/85xx/xes_mpc85xx.c
+++ b/arch/powerpc/platforms/85xx/xes_mpc85xx.c
@@ -32,6 +32,9 @@
 
 #include <sysdev/fsl_soc.h>
 #include <sysdev/fsl_pci.h>
+#include "smp.h"
+
+#include "mpc85xx.h"
 
 /* A few bit definitions needed for fixups on some boards */
 #define MPC85xx_L2CTL_L2E		0x80000000 /* L2 enable */
@@ -40,29 +43,11 @@
 
 void __init xes_mpc85xx_pic_init(void)
 {
-	struct mpic *mpic;
-	struct resource r;
-	struct device_node *np;
-
-	np = of_find_node_by_type(NULL, "open-pic");
-	if (np == NULL) {
-		printk(KERN_ERR "Could not find open-pic node\n");
-		return;
-	}
-
-	if (of_address_to_resource(np, 0, &r)) {
-		printk(KERN_ERR "Failed to map mpic register space\n");
-		of_node_put(np);
-		return;
-	}
-
-	mpic = mpic_alloc(np, r.start,
-			  MPIC_PRIMARY | MPIC_WANTS_RESET |
+	struct mpic *mpic = mpic_alloc(NULL, 0,
+			  MPIC_WANTS_RESET |
 			  MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS,
 			0, 256, " OpenPIC  ");
 	BUG_ON(mpic == NULL);
-	of_node_put(np);
-
 	mpic_init(mpic);
 }
 
@@ -136,9 +121,6 @@ static int primary_phb_addr;
 /*
  * Setup the architecture
  */
-#ifdef CONFIG_SMP
-extern void __init mpc85xx_smp_init(void);
-#endif
 static void __init xes_mpc85xx_setup_arch(void)
 {
 #ifdef CONFIG_PCI
@@ -172,26 +154,12 @@ static void __init xes_mpc85xx_setup_arch(void)
 	}
 #endif
 
-#ifdef CONFIG_SMP
 	mpc85xx_smp_init();
-#endif
 }
 
-static struct of_device_id __initdata xes_mpc85xx_ids[] = {
-	{ .type = "soc", },
-	{ .compatible = "soc", },
-	{ .compatible = "simple-bus", },
-	{ .compatible = "gianfar", },
-	{},
-};
-
-static int __init xes_mpc85xx_publish_devices(void)
-{
-	return of_platform_bus_probe(NULL, xes_mpc85xx_ids, NULL);
-}
-machine_device_initcall(xes_mpc8572, xes_mpc85xx_publish_devices);
-machine_device_initcall(xes_mpc8548, xes_mpc85xx_publish_devices);
-machine_device_initcall(xes_mpc8540, xes_mpc85xx_publish_devices);
+machine_device_initcall(xes_mpc8572, mpc85xx_common_publish_devices);
+machine_device_initcall(xes_mpc8548, mpc85xx_common_publish_devices);
+machine_device_initcall(xes_mpc8540, mpc85xx_common_publish_devices);
 
 /*
  * Called very early, device-tree isn't unflattened
diff --git a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
index b11c3535f35..569262ca499 100644
--- a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
+++ b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
@@ -161,7 +161,7 @@ mpc86xx_time_init(void)
 
 static __initdata struct of_device_id of_bus_ids[] = {
 	{ .compatible = "simple-bus", },
-	{ .compatible = "fsl,rapidio-delta", },
+	{ .compatible = "fsl,srio", },
 	{ .compatible = "gianfar", },
 	{},
 };
diff --git a/arch/powerpc/platforms/86xx/pic.c b/arch/powerpc/platforms/86xx/pic.c
index 8ef8960abda..52bbfa03153 100644
--- a/arch/powerpc/platforms/86xx/pic.c
+++ b/arch/powerpc/platforms/86xx/pic.c
@@ -31,26 +31,16 @@ static void mpc86xx_8259_cascade(unsigned int irq, struct irq_desc *desc)
 
 void __init mpc86xx_init_irq(void)
 {
-	struct mpic *mpic;
-	struct device_node *np;
-	struct resource res;
 #ifdef CONFIG_PPC_I8259
+	struct device_node *np;
 	struct device_node *cascade_node = NULL;
 	int cascade_irq;
 #endif
 
-	/* Determine PIC address. */
-	np = of_find_node_by_type(NULL, "open-pic");
-	if (np == NULL)
-		return;
-	of_address_to_resource(np, 0, &res);
-
-	mpic = mpic_alloc(np, res.start,
-			MPIC_PRIMARY | MPIC_WANTS_RESET |
-			MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS |
-			MPIC_SINGLE_DEST_CPU,
+	struct mpic *mpic = mpic_alloc(NULL, 0,
+			MPIC_WANTS_RESET | MPIC_BIG_ENDIAN |
+			MPIC_BROKEN_FRR_NIRQS | MPIC_SINGLE_DEST_CPU,
 			0, 256, " MPIC     ");
-	of_node_put(np);
 	BUG_ON(mpic == NULL);
 
 	mpic_init(mpic);
diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
index 3fe6d927ad7..31e1adeaa92 100644
--- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig
@@ -211,6 +211,12 @@ config PPC_PASEMI_CPUFREQ
 
 endmenu
 
+menu "CPUIdle driver"
+
+source "drivers/cpuidle/Kconfig"
+
+endmenu
+
 config PPC601_SYNC_FIX
 	bool "Workarounds for PPC601 bugs"
 	depends on 6xx && (PPC_PREP || PPC_PMAC)
diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype
index fbecae0fbb4..425db18580a 100644
--- a/arch/powerpc/platforms/Kconfig.cputype
+++ b/arch/powerpc/platforms/Kconfig.cputype
@@ -174,7 +174,6 @@ config BOOKE
 config FSL_BOOKE
 	bool
 	depends on (E200 || E500) && PPC32
-	select SYS_SUPPORTS_HUGETLBFS if PHYS_64BIT
 	default y
 
 # this is for common code between PPC32 & PPC64 FSL BOOKE
@@ -182,6 +181,7 @@ config PPC_FSL_BOOK3E
 	bool
 	select FSL_EMB_PERFMON
 	select PPC_SMP_MUXED_IPI
+	select SYS_SUPPORTS_HUGETLBFS if PHYS_64BIT || PPC64
 	default y if FSL_BOOKE
 
 config PTE_64BIT
@@ -236,7 +236,7 @@ config VSX
 
 config PPC_ICSWX
 	bool "Support for PowerPC icswx coprocessor instruction"
-	depends on POWER4
+	depends on POWER4 || PPC_A2
 	default n
 	---help---
 
@@ -252,6 +252,25 @@ config PPC_ICSWX
 
 	  If in doubt, say N here.
 
+config PPC_ICSWX_PID
+	bool "icswx requires direct PID management"
+	depends on PPC_ICSWX && POWER4
+	default y
+	---help---
+	  The PID register in server is used explicitly for ICSWX.  In
+	  embedded systems PID managment is done by the system.
+
+config PPC_ICSWX_USE_SIGILL
+	bool "Should a bad CT cause a SIGILL?"
+	depends on PPC_ICSWX
+	default n
+	---help---
+	  Should a bad CT used for "non-record form ICSWX" cause an
+	  illegal intruction signal or should it be silent as
+	  architected.
+
+	  If in doubt, say N here.
+
 config SPE
 	bool "SPE Support"
 	depends on E200 || (E500 && !PPC_E500MC)
@@ -290,7 +309,7 @@ config PPC_BOOK3E_MMU
 
 config PPC_MM_SLICES
 	bool
-	default y if (PPC64 && HUGETLB_PAGE) || (PPC_STD_MMU_64 && PPC_64K_PAGES)
+	default y if (!PPC_FSL_BOOK3E && PPC64 && HUGETLB_PAGE) || (PPC_STD_MMU_64 && PPC_64K_PAGES)
 	default n
 
 config VIRT_CPU_ACCOUNTING
diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c
index 592c3d51b81..ae9fc7bc17d 100644
--- a/arch/powerpc/platforms/cell/iommu.c
+++ b/arch/powerpc/platforms/cell/iommu.c
@@ -1037,6 +1037,8 @@ static int __init cell_iommu_fixed_mapping_init(void)
 
 	/* The fixed mapping is only supported on axon machines */
 	np = of_find_node_by_name(NULL, "axon");
+	of_node_put(np);
+
 	if (!np) {
 		pr_debug("iommu: fixed mapping disabled, no axons found\n");
 		return -1;
diff --git a/arch/powerpc/platforms/cell/setup.c b/arch/powerpc/platforms/cell/setup.c
index 0fc9b725612..62002a7edfe 100644
--- a/arch/powerpc/platforms/cell/setup.c
+++ b/arch/powerpc/platforms/cell/setup.c
@@ -184,24 +184,10 @@ static int __init cell_publish_devices(void)
 }
 machine_subsys_initcall(cell, cell_publish_devices);
 
-static void cell_mpic_cascade(unsigned int irq, struct irq_desc *desc)
-{
-	struct irq_chip *chip = irq_desc_get_chip(desc);
-	struct mpic *mpic = irq_desc_get_handler_data(desc);
-	unsigned int virq;
-
-	virq = mpic_get_one_irq(mpic);
-	if (virq != NO_IRQ)
-		generic_handle_irq(virq);
-
-	chip->irq_eoi(&desc->irq_data);
-}
-
 static void __init mpic_init_IRQ(void)
 {
 	struct device_node *dn;
 	struct mpic *mpic;
-	unsigned int virq;
 
 	for (dn = NULL;
 	     (dn = of_find_node_by_name(dn, "interrupt-controller"));) {
@@ -211,19 +197,10 @@ static void __init mpic_init_IRQ(void)
 		/* The MPIC driver will get everything it needs from the
 		 * device-tree, just pass 0 to all arguments
 		 */
-		mpic = mpic_alloc(dn, 0, 0, 0, 0, " MPIC     ");
+		mpic = mpic_alloc(dn, 0, MPIC_SECONDARY, 0, 0, " MPIC     ");
 		if (mpic == NULL)
 			continue;
 		mpic_init(mpic);
-
-		virq = irq_of_parse_and_map(dn, 0);
-		if (virq == NO_IRQ)
-			continue;
-
-		printk(KERN_INFO "%s : hooking up to IRQ %d\n",
-		       dn->full_name, virq);
-		irq_set_handler_data(virq, mpic);
-		irq_set_chained_handler(virq, cell_mpic_cascade);
 	}
 }
 
diff --git a/arch/powerpc/platforms/chrp/setup.c b/arch/powerpc/platforms/chrp/setup.c
index 12278649841..f1f17bb2c33 100644
--- a/arch/powerpc/platforms/chrp/setup.c
+++ b/arch/powerpc/platforms/chrp/setup.c
@@ -435,8 +435,7 @@ static void __init chrp_find_openpic(void)
 	if (len > 1)
 		isu_size = iranges[3];
 
-	chrp_mpic = mpic_alloc(np, opaddr, MPIC_PRIMARY,
-			       isu_size, 0, " MPIC    ");
+	chrp_mpic = mpic_alloc(np, opaddr, 0, isu_size, 0, " MPIC    ");
 	if (chrp_mpic == NULL) {
 		printk(KERN_ERR "Failed to allocate MPIC structure\n");
 		goto bail;
diff --git a/arch/powerpc/platforms/embedded6xx/holly.c b/arch/powerpc/platforms/embedded6xx/holly.c
index 2e9bcf6444c..9cfcf20c056 100644
--- a/arch/powerpc/platforms/embedded6xx/holly.c
+++ b/arch/powerpc/platforms/embedded6xx/holly.c
@@ -148,30 +148,14 @@ static void __init holly_setup_arch(void)
 static void __init holly_init_IRQ(void)
 {
 	struct mpic *mpic;
-	phys_addr_t mpic_paddr = 0;
-	struct device_node *tsi_pic;
 #ifdef CONFIG_PCI
 	unsigned int cascade_pci_irq;
 	struct device_node *tsi_pci;
 	struct device_node *cascade_node = NULL;
 #endif
 
-	tsi_pic = of_find_node_by_type(NULL, "open-pic");
-	if (tsi_pic) {
-		unsigned int size;
-		const void *prop = of_get_property(tsi_pic, "reg", &size);
-		mpic_paddr = of_translate_address(tsi_pic, prop);
-	}
-
-	if (mpic_paddr == 0) {
-		printk(KERN_ERR "%s: No tsi108 PIC found !\n", __func__);
-		return;
-	}
-
-	pr_debug("%s: tsi108 pic phys_addr = 0x%x\n", __func__, (u32) mpic_paddr);
-
-	mpic = mpic_alloc(tsi_pic, mpic_paddr,
-			MPIC_PRIMARY | MPIC_BIG_ENDIAN | MPIC_WANTS_RESET |
+	mpic = mpic_alloc(NULL, 0,
+			MPIC_BIG_ENDIAN | MPIC_WANTS_RESET |
 			MPIC_SPV_EOI | MPIC_NO_PTHROU_DIS | MPIC_REGSET_TSI108,
 			24,
 			NR_IRQS-4, /* num_sources used */
@@ -179,7 +163,7 @@ static void __init holly_init_IRQ(void)
 
 	BUG_ON(mpic == NULL);
 
-	mpic_assign_isu(mpic, 0, mpic_paddr + 0x100);
+	mpic_assign_isu(mpic, 0, mpic->paddr + 0x100);
 
 	mpic_init(mpic);
 
@@ -204,7 +188,6 @@ static void __init holly_init_IRQ(void)
 #endif
 	/* Configure MPIC outputs to CPU0 */
 	tsi108_write_reg(TSI108_MPIC_OFFSET + 0x30c, 0);
-	of_node_put(tsi_pic);
 }
 
 void holly_show_cpuinfo(struct seq_file *m)
diff --git a/arch/powerpc/platforms/embedded6xx/linkstation.c b/arch/powerpc/platforms/embedded6xx/linkstation.c
index 244f997de79..bcfad92c9ce 100644
--- a/arch/powerpc/platforms/embedded6xx/linkstation.c
+++ b/arch/powerpc/platforms/embedded6xx/linkstation.c
@@ -81,29 +81,19 @@ static void __init linkstation_setup_arch(void)
 static void __init linkstation_init_IRQ(void)
 {
 	struct mpic *mpic;
-	struct device_node *dnp;
-	const u32 *prop;
-	int size;
-	phys_addr_t paddr;
 
-	dnp = of_find_node_by_type(NULL, "open-pic");
-	if (dnp == NULL)
-		return;
-
-	prop = of_get_property(dnp, "reg", &size);
-	paddr = (phys_addr_t)of_translate_address(dnp, prop);
-
-	mpic = mpic_alloc(dnp, paddr, MPIC_PRIMARY | MPIC_WANTS_RESET, 4, 32, " EPIC     ");
+	mpic = mpic_alloc(NULL, 0, MPIC_WANTS_RESET,
+			4, 32, " EPIC     ");
 	BUG_ON(mpic == NULL);
 
 	/* PCI IRQs */
-	mpic_assign_isu(mpic, 0, paddr + 0x10200);
+	mpic_assign_isu(mpic, 0, mpic->paddr + 0x10200);
 
 	/* I2C */
-	mpic_assign_isu(mpic, 1, paddr + 0x11000);
+	mpic_assign_isu(mpic, 1, mpic->paddr + 0x11000);
 
 	/* ttyS0, ttyS1 */
-	mpic_assign_isu(mpic, 2, paddr + 0x11100);
+	mpic_assign_isu(mpic, 2, mpic->paddr + 0x11100);
 
 	mpic_init(mpic);
 }
diff --git a/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c
index f8f33e16c6b..f3350d786f5 100644
--- a/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c
+++ b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c
@@ -102,31 +102,14 @@ static void __init mpc7448_hpc2_setup_arch(void)
 static void __init mpc7448_hpc2_init_IRQ(void)
 {
 	struct mpic *mpic;
-	phys_addr_t mpic_paddr = 0;
-	struct device_node *tsi_pic;
 #ifdef CONFIG_PCI
 	unsigned int cascade_pci_irq;
 	struct device_node *tsi_pci;
 	struct device_node *cascade_node = NULL;
 #endif
 
-	tsi_pic = of_find_node_by_type(NULL, "open-pic");
-	if (tsi_pic) {
-		unsigned int size;
-		const void *prop = of_get_property(tsi_pic, "reg", &size);
-		mpic_paddr = of_translate_address(tsi_pic, prop);
-	}
-
-	if (mpic_paddr == 0) {
-		printk("%s: No tsi108 PIC found !\n", __func__);
-		return;
-	}
-
-	DBG("%s: tsi108 pic phys_addr = 0x%x\n", __func__,
-	    (u32) mpic_paddr);
-
-	mpic = mpic_alloc(tsi_pic, mpic_paddr,
-			MPIC_PRIMARY | MPIC_BIG_ENDIAN | MPIC_WANTS_RESET |
+	mpic = mpic_alloc(NULL, 0,
+			MPIC_BIG_ENDIAN | MPIC_WANTS_RESET |
 			MPIC_SPV_EOI | MPIC_NO_PTHROU_DIS | MPIC_REGSET_TSI108,
 			24,
 			NR_IRQS-4, /* num_sources used */
@@ -134,7 +117,7 @@ static void __init mpc7448_hpc2_init_IRQ(void)
 
 	BUG_ON(mpic == NULL);
 
-	mpic_assign_isu(mpic, 0, mpic_paddr + 0x100);
+	mpic_assign_isu(mpic, 0, mpic->paddr + 0x100);
 
 	mpic_init(mpic);
 
@@ -159,7 +142,6 @@ static void __init mpc7448_hpc2_init_IRQ(void)
 #endif
 	/* Configure MPIC outputs to CPU0 */
 	tsi108_write_reg(TSI108_MPIC_OFFSET + 0x30c, 0);
-	of_node_put(tsi_pic);
 }
 
 void mpc7448_hpc2_show_cpuinfo(struct seq_file *m)
diff --git a/arch/powerpc/platforms/embedded6xx/storcenter.c b/arch/powerpc/platforms/embedded6xx/storcenter.c
index f1eebcae9bf..afa63883496 100644
--- a/arch/powerpc/platforms/embedded6xx/storcenter.c
+++ b/arch/powerpc/platforms/embedded6xx/storcenter.c
@@ -83,35 +83,17 @@ static void __init storcenter_setup_arch(void)
 static void __init storcenter_init_IRQ(void)
 {
 	struct mpic *mpic;
-	struct device_node *dnp;
-	const void *prop;
-	int size;
-	phys_addr_t paddr;
-
-	dnp = of_find_node_by_type(NULL, "open-pic");
-	if (dnp == NULL)
-		return;
-
-	prop = of_get_property(dnp, "reg", &size);
-	if (prop == NULL) {
-		of_node_put(dnp);
-		return;
-	}
-
-	paddr = (phys_addr_t)of_translate_address(dnp, prop);
-	mpic = mpic_alloc(dnp, paddr, MPIC_PRIMARY | MPIC_WANTS_RESET,
-			16, 32, " OpenPIC  ");
-
-	of_node_put(dnp);
 
+	mpic = mpic_alloc(NULL, 0, MPIC_WANTS_RESET,
+			16, 32, " OpenPIC  ");
 	BUG_ON(mpic == NULL);
 
 	/*
 	 * 16 Serial Interrupts followed by 16 Internal Interrupts.
 	 * I2C is the second internal, so it is at 17, 0x11020.
 	 */
-	mpic_assign_isu(mpic, 0, paddr + 0x10200);
-	mpic_assign_isu(mpic, 1, paddr + 0x11000);
+	mpic_assign_isu(mpic, 0, mpic->paddr + 0x10200);
+	mpic_assign_isu(mpic, 1, mpic->paddr + 0x11000);
 
 	mpic_init(mpic);
 }
diff --git a/arch/powerpc/platforms/maple/pci.c b/arch/powerpc/platforms/maple/pci.c
index dd2e48b2850..401e3f3f74c 100644
--- a/arch/powerpc/platforms/maple/pci.c
+++ b/arch/powerpc/platforms/maple/pci.c
@@ -207,6 +207,54 @@ static volatile void __iomem *u3_ht_cfg_access(struct pci_controller* hose,
 		return hose->cfg_data + u3_ht_cfa1(bus, devfn, offset);
 }
 
+static int u3_ht_root_read_config(struct pci_controller *hose, u8 offset,
+				  int len, u32 *val)
+{
+	volatile void __iomem *addr;
+
+	addr = hose->cfg_addr;
+	addr += ((offset & ~3) << 2) + (4 - len - (offset & 3));
+
+	switch (len) {
+	case 1:
+		*val = in_8(addr);
+		break;
+	case 2:
+		*val = in_be16(addr);
+		break;
+	default:
+		*val = in_be32(addr);
+		break;
+	}
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int u3_ht_root_write_config(struct pci_controller *hose, u8 offset,
+				  int len, u32 val)
+{
+	volatile void __iomem *addr;
+
+	addr = hose->cfg_addr + ((offset & ~3) << 2) + (4 - len - (offset & 3));
+
+	if (offset >= PCI_BASE_ADDRESS_0 && offset < PCI_CAPABILITY_LIST)
+		return PCIBIOS_SUCCESSFUL;
+
+	switch (len) {
+	case 1:
+		out_8(addr, val);
+		break;
+	case 2:
+		out_be16(addr, val);
+		break;
+	default:
+		out_be32(addr, val);
+		break;
+	}
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
 static int u3_ht_read_config(struct pci_bus *bus, unsigned int devfn,
 			     int offset, int len, u32 *val)
 {
@@ -217,6 +265,9 @@ static int u3_ht_read_config(struct pci_bus *bus, unsigned int devfn,
 	if (hose == NULL)
 		return PCIBIOS_DEVICE_NOT_FOUND;
 
+	if (bus->number == hose->first_busno && devfn == PCI_DEVFN(0, 0))
+		return u3_ht_root_read_config(hose, offset, len, val);
+
 	if (offset > 0xff)
 		return PCIBIOS_BAD_REGISTER_NUMBER;
 
@@ -252,6 +303,9 @@ static int u3_ht_write_config(struct pci_bus *bus, unsigned int devfn,
 	if (hose == NULL)
 		return PCIBIOS_DEVICE_NOT_FOUND;
 
+	if (bus->number == hose->first_busno && devfn == PCI_DEVFN(0, 0))
+		return u3_ht_root_write_config(hose, offset, len, val);
+
 	if (offset > 0xff)
 		return PCIBIOS_BAD_REGISTER_NUMBER;
 
@@ -428,6 +482,7 @@ static void __init setup_u3_ht(struct pci_controller* hose)
 	 * reg_property and using some accessor functions instead
 	 */
 	hose->cfg_data = ioremap(0xf2000000, 0x02000000);
+	hose->cfg_addr = ioremap(0xf8070000, 0x1000);
 
 	hose->first_busno = 0;
 	hose->last_busno = 0xef;
diff --git a/arch/powerpc/platforms/maple/setup.c b/arch/powerpc/platforms/maple/setup.c
index 4c372047c94..0bcbfe7b2c5 100644
--- a/arch/powerpc/platforms/maple/setup.c
+++ b/arch/powerpc/platforms/maple/setup.c
@@ -221,7 +221,7 @@ static void __init maple_init_IRQ(void)
 	unsigned long openpic_addr = 0;
 	int naddr, n, i, opplen, has_isus = 0;
 	struct mpic *mpic;
-	unsigned int flags = MPIC_PRIMARY;
+	unsigned int flags = 0;
 
 	/* Locate MPIC in the device-tree. Note that there is a bug
 	 * in Maple device-tree where the type of the controller is
diff --git a/arch/powerpc/platforms/pasemi/setup.c b/arch/powerpc/platforms/pasemi/setup.c
index 6f355821055..98b7a7c1317 100644
--- a/arch/powerpc/platforms/pasemi/setup.c
+++ b/arch/powerpc/platforms/pasemi/setup.c
@@ -224,7 +224,7 @@ static __init void pas_init_IRQ(void)
 	openpic_addr = of_read_number(opprop, naddr);
 	printk(KERN_DEBUG "OpenPIC addr: %lx\n", openpic_addr);
 
-	mpic_flags = MPIC_PRIMARY | MPIC_LARGE_VECTORS | MPIC_NO_BIAS;
+	mpic_flags = MPIC_LARGE_VECTORS | MPIC_NO_BIAS;
 
 	nmiprop = of_get_property(mpic_node, "nmi-source", NULL);
 	if (nmiprop)
@@ -234,7 +234,7 @@ static __init void pas_init_IRQ(void)
 			  mpic_flags, 0, 0, "PASEMI-OPIC");
 	BUG_ON(!mpic);
 
-	mpic_assign_isu(mpic, 0, openpic_addr + 0x10000);
+	mpic_assign_isu(mpic, 0, mpic->paddr + 0x10000);
 	mpic_init(mpic);
 	/* The NMI/MCK source needs to be prio 15 */
 	if (nmiprop) {
diff --git a/arch/powerpc/platforms/powermac/pic.c b/arch/powerpc/platforms/powermac/pic.c
index 901bfbddc3d..7761aabfc29 100644
--- a/arch/powerpc/platforms/powermac/pic.c
+++ b/arch/powerpc/platforms/powermac/pic.c
@@ -52,13 +52,8 @@ struct device_node *of_irq_dflt_pic;
 /* Default addresses */
 static volatile struct pmac_irq_hw __iomem *pmac_irq_hw[4];
 
-#define GC_LEVEL_MASK		0x3ff00000
-#define OHARE_LEVEL_MASK	0x1ff00000
-#define HEATHROW_LEVEL_MASK	0x1ff00000
-
 static int max_irqs;
 static int max_real_irqs;
-static u32 level_mask[4];
 
 static DEFINE_RAW_SPINLOCK(pmac_pic_lock);
 
@@ -217,8 +212,7 @@ static irqreturn_t gatwick_action(int cpl, void *dev_id)
 	for (irq = max_irqs; (irq -= 32) >= max_real_irqs; ) {
 		int i = irq >> 5;
 		bits = in_le32(&pmac_irq_hw[i]->event) | ppc_lost_interrupts[i];
-		/* We must read level interrupts from the level register */
-		bits |= (in_le32(&pmac_irq_hw[i]->level) & level_mask[i]);
+		bits |= in_le32(&pmac_irq_hw[i]->level);
 		bits &= ppc_cached_irq_mask[i];
 		if (bits == 0)
 			continue;
@@ -248,8 +242,7 @@ static unsigned int pmac_pic_get_irq(void)
 	for (irq = max_real_irqs; (irq -= 32) >= 0; ) {
 		int i = irq >> 5;
 		bits = in_le32(&pmac_irq_hw[i]->event) | ppc_lost_interrupts[i];
-		/* We must read level interrupts from the level register */
-		bits |= (in_le32(&pmac_irq_hw[i]->level) & level_mask[i]);
+		bits |= in_le32(&pmac_irq_hw[i]->level);
 		bits &= ppc_cached_irq_mask[i];
 		if (bits == 0)
 			continue;
@@ -284,19 +277,14 @@ static int pmac_pic_host_match(struct irq_host *h, struct device_node *node)
 static int pmac_pic_host_map(struct irq_host *h, unsigned int virq,
 			     irq_hw_number_t hw)
 {
-	int level;
-
 	if (hw >= max_irqs)
 		return -EINVAL;
 
 	/* Mark level interrupts, set delayed disable for edge ones and set
 	 * handlers
 	 */
-	level = !!(level_mask[hw >> 5] & (1UL << (hw & 0x1f)));
-	if (level)
-		irq_set_status_flags(virq, IRQ_LEVEL);
-	irq_set_chip_and_handler(virq, &pmac_pic,
-				 level ? handle_level_irq : handle_edge_irq);
+	irq_set_status_flags(virq, IRQ_LEVEL);
+	irq_set_chip_and_handler(virq, &pmac_pic, handle_level_irq);
 	return 0;
 }
 
@@ -334,21 +322,14 @@ static void __init pmac_pic_probe_oldstyle(void)
 
 	if ((master = of_find_node_by_name(NULL, "gc")) != NULL) {
 		max_irqs = max_real_irqs = 32;
-		level_mask[0] = GC_LEVEL_MASK;
 	} else if ((master = of_find_node_by_name(NULL, "ohare")) != NULL) {
 		max_irqs = max_real_irqs = 32;
-		level_mask[0] = OHARE_LEVEL_MASK;
-
 		/* We might have a second cascaded ohare */
 		slave = of_find_node_by_name(NULL, "pci106b,7");
-		if (slave) {
+		if (slave)
 			max_irqs = 64;
-			level_mask[1] = OHARE_LEVEL_MASK;
-		}
 	} else if ((master = of_find_node_by_name(NULL, "mac-io")) != NULL) {
 		max_irqs = max_real_irqs = 64;
-		level_mask[0] = HEATHROW_LEVEL_MASK;
-		level_mask[1] = 0;
 
 		/* We might have a second cascaded heathrow */
 		slave = of_find_node_by_name(master, "mac-io");
@@ -363,11 +344,8 @@ static void __init pmac_pic_probe_oldstyle(void)
 		}
 
 		/* We found a slave */
-		if (slave) {
+		if (slave)
 			max_irqs = 128;
-			level_mask[2] = HEATHROW_LEVEL_MASK;
-			level_mask[3] = 0;
-		}
 	}
 	BUG_ON(master == NULL);
 
@@ -464,18 +442,6 @@ int of_irq_map_oldworld(struct device_node *device, int index,
 }
 #endif /* CONFIG_PPC32 */
 
-static void pmac_u3_cascade(unsigned int irq, struct irq_desc *desc)
-{
-	struct irq_chip *chip = irq_desc_get_chip(desc);
-	struct mpic *mpic = irq_desc_get_handler_data(desc);
-	unsigned int cascade_irq = mpic_get_one_irq(mpic);
-
-	if (cascade_irq != NO_IRQ)
-		generic_handle_irq(cascade_irq);
-
-	chip->irq_eoi(&desc->irq_data);
-}
-
 static void __init pmac_pic_setup_mpic_nmi(struct mpic *mpic)
 {
 #if defined(CONFIG_XMON) && defined(CONFIG_PPC32)
@@ -498,14 +464,8 @@ static struct mpic * __init pmac_setup_one_mpic(struct device_node *np,
 						int master)
 {
 	const char *name = master ? " MPIC 1   " : " MPIC 2   ";
-	struct resource r;
 	struct mpic *mpic;
-	unsigned int flags = master ? MPIC_PRIMARY : 0;
-	int rc;
-
-	rc = of_address_to_resource(np, 0, &r);
-	if (rc)
-		return NULL;
+	unsigned int flags = master ? 0 : MPIC_SECONDARY;
 
 	pmac_call_feature(PMAC_FTR_ENABLE_MPIC, np, 0, 0);
 
@@ -519,7 +479,7 @@ static struct mpic * __init pmac_setup_one_mpic(struct device_node *np,
 	if (master && (flags & MPIC_BIG_ENDIAN))
 		flags |= MPIC_U3_HT_IRQS;
 
-	mpic = mpic_alloc(np, r.start, flags, 0, 0, name);
+	mpic = mpic_alloc(np, 0, flags, 0, 0, name);
 	if (mpic == NULL)
 		return NULL;
 
@@ -532,7 +492,6 @@ static int __init pmac_pic_probe_mpic(void)
 {
 	struct mpic *mpic1, *mpic2;
 	struct device_node *np, *master = NULL, *slave = NULL;
-	unsigned int cascade;
 
 	/* We can have up to 2 MPICs cascaded */
 	for (np = NULL; (np = of_find_node_by_type(np, "open-pic"))
@@ -568,27 +527,14 @@ static int __init pmac_pic_probe_mpic(void)
 
 	of_node_put(master);
 
-	/* No slave, let's go out */
-	if (slave == NULL)
-		return 0;
-
-	/* Get/Map slave interrupt */
-	cascade = irq_of_parse_and_map(slave, 0);
-	if (cascade == NO_IRQ) {
-		printk(KERN_ERR "Failed to map cascade IRQ\n");
-		return 0;
-	}
-
-	mpic2 = pmac_setup_one_mpic(slave, 0);
-	if (mpic2 == NULL) {
-		printk(KERN_ERR "Failed to setup slave MPIC\n");
+	/* Set up a cascaded controller, if present */
+	if (slave) {
+		mpic2 = pmac_setup_one_mpic(slave, 0);
+		if (mpic2 == NULL)
+			printk(KERN_ERR "Failed to setup slave MPIC\n");
 		of_node_put(slave);
-		return 0;
 	}
-	irq_set_handler_data(cascade, mpic2);
-	irq_set_chained_handler(cascade, pmac_u3_cascade);
 
-	of_node_put(slave);
 	return 0;
 }
 
diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c
index 96580b189ec..970ea1de429 100644
--- a/arch/powerpc/platforms/powermac/setup.c
+++ b/arch/powerpc/platforms/powermac/setup.c
@@ -494,11 +494,15 @@ static int __init pmac_declare_of_platform_devices(void)
 		return -1;
 
 	np = of_find_node_by_name(NULL, "valkyrie");
-	if (np)
+	if (np) {
 		of_platform_device_create(np, "valkyrie", NULL);
+		of_node_put(np);
+	}
 	np = of_find_node_by_name(NULL, "platinum");
-	if (np)
+	if (np) {
 		of_platform_device_create(np, "platinum", NULL);
+		of_node_put(np);
+	}
         np = of_find_node_by_type(NULL, "smu");
         if (np) {
 		of_platform_device_create(np, "smu", NULL);
diff --git a/arch/powerpc/platforms/powermac/smp.c b/arch/powerpc/platforms/powermac/smp.c
index 9b6a820bdd7..44d769258eb 100644
--- a/arch/powerpc/platforms/powermac/smp.c
+++ b/arch/powerpc/platforms/powermac/smp.c
@@ -200,7 +200,7 @@ static int psurge_secondary_ipi_init(void)
 
 	if (psurge_secondary_virq)
 		rc = request_irq(psurge_secondary_virq, psurge_ipi_intr,
-			IRQF_PERCPU, "IPI", NULL);
+			IRQF_PERCPU | IRQF_NO_THREAD, "IPI", NULL);
 
 	if (rc)
 		pr_err("Failed to setup secondary cpu IPI\n");
@@ -408,13 +408,13 @@ static int __init smp_psurge_kick_cpu(int nr)
 
 static struct irqaction psurge_irqaction = {
 	.handler = psurge_ipi_intr,
-	.flags = IRQF_PERCPU,
+	.flags = IRQF_PERCPU | IRQF_NO_THREAD,
 	.name = "primary IPI",
 };
 
 static void __init smp_psurge_setup_cpu(int cpu_nr)
 {
-	if (cpu_nr != 0)
+	if (cpu_nr != 0 || !psurge_start)
 		return;
 
 	/* reset the entry point so if we get another intr we won't
diff --git a/arch/powerpc/platforms/powernv/Makefile b/arch/powerpc/platforms/powernv/Makefile
index 31853008b41..bcc3cb48a44 100644
--- a/arch/powerpc/platforms/powernv/Makefile
+++ b/arch/powerpc/platforms/powernv/Makefile
@@ -2,4 +2,4 @@ obj-y			+= setup.o opal-takeover.o opal-wrappers.o opal.o
 obj-y			+= opal-rtc.o opal-nvram.o
 
 obj-$(CONFIG_SMP)	+= smp.o
-obj-$(CONFIG_PCI)	+= pci.o pci-p5ioc2.o
+obj-$(CONFIG_PCI)	+= pci.o pci-p5ioc2.o pci-ioda.o
diff --git a/arch/powerpc/platforms/powernv/opal-wrappers.S b/arch/powerpc/platforms/powernv/opal-wrappers.S
index 4a3f46d8533..3bb07e5e43c 100644
--- a/arch/powerpc/platforms/powernv/opal-wrappers.S
+++ b/arch/powerpc/platforms/powernv/opal-wrappers.S
@@ -99,3 +99,11 @@ OPAL_CALL(opal_write_oppanel,			OPAL_WRITE_OPPANEL);
 OPAL_CALL(opal_pci_map_pe_dma_window,		OPAL_PCI_MAP_PE_DMA_WINDOW);
 OPAL_CALL(opal_pci_map_pe_dma_window_real,	OPAL_PCI_MAP_PE_DMA_WINDOW_REAL);
 OPAL_CALL(opal_pci_reset,			OPAL_PCI_RESET);
+OPAL_CALL(opal_pci_get_hub_diag_data,		OPAL_PCI_GET_HUB_DIAG_DATA);
+OPAL_CALL(opal_pci_get_phb_diag_data,		OPAL_PCI_GET_PHB_DIAG_DATA);
+OPAL_CALL(opal_pci_fence_phb,			OPAL_PCI_FENCE_PHB);
+OPAL_CALL(opal_pci_reinit,			OPAL_PCI_REINIT);
+OPAL_CALL(opal_pci_mask_pe_error,		OPAL_PCI_MASK_PE_ERROR);
+OPAL_CALL(opal_set_slot_led_status,		OPAL_SET_SLOT_LED_STATUS);
+OPAL_CALL(opal_get_epow_status,			OPAL_GET_EPOW_STATUS);
+OPAL_CALL(opal_set_system_attention_led,	OPAL_SET_SYSTEM_ATTENTION_LED);
diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
new file mode 100644
index 00000000000..f31162cfdaa
--- /dev/null
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -0,0 +1,1330 @@
+/*
+ * Support PCI/PCIe on PowerNV platforms
+ *
+ * Copyright 2011 Benjamin Herrenschmidt, IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#undef DEBUG
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/bootmem.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/msi.h>
+
+#include <asm/sections.h>
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/pci-bridge.h>
+#include <asm/machdep.h>
+#include <asm/ppc-pci.h>
+#include <asm/opal.h>
+#include <asm/iommu.h>
+#include <asm/tce.h>
+#include <asm/abs_addr.h>
+
+#include "powernv.h"
+#include "pci.h"
+
+struct resource_wrap {
+	struct list_head	link;
+	resource_size_t		size;
+	resource_size_t		align;
+	struct pci_dev		*dev;	/* Set if it's a device */
+	struct pci_bus		*bus;	/* Set if it's a bridge */
+};
+
+static int __pe_printk(const char *level, const struct pnv_ioda_pe *pe,
+		       struct va_format *vaf)
+{
+	char pfix[32];
+
+	if (pe->pdev)
+		strlcpy(pfix, dev_name(&pe->pdev->dev), sizeof(pfix));
+	else
+		sprintf(pfix, "%04x:%02x     ",
+			pci_domain_nr(pe->pbus), pe->pbus->number);
+	return printk("pci %s%s: [PE# %.3d] %pV", level, pfix, pe->pe_number, vaf);
+}
+
+#define define_pe_printk_level(func, kern_level)		\
+static int func(const struct pnv_ioda_pe *pe, const char *fmt, ...)	\
+{								\
+	struct va_format vaf;					\
+	va_list args;						\
+	int r;							\
+								\
+	va_start(args, fmt);					\
+								\
+	vaf.fmt = fmt;						\
+	vaf.va = &args;						\
+								\
+	r = __pe_printk(kern_level, pe, &vaf);			\
+	va_end(args);						\
+								\
+	return r;						\
+}								\
+
+define_pe_printk_level(pe_err, KERN_ERR);
+define_pe_printk_level(pe_warn, KERN_WARNING);
+define_pe_printk_level(pe_info, KERN_INFO);
+
+
+/* Calculate resource usage & alignment requirement of a single
+ * device. This will also assign all resources within the device
+ * for a given type starting at 0 for the biggest one and then
+ * assigning in decreasing order of size.
+ */
+static void __devinit pnv_ioda_calc_dev(struct pci_dev *dev, unsigned int flags,
+					resource_size_t *size,
+					resource_size_t *align)
+{
+	resource_size_t start;
+	struct resource *r;
+	int i;
+
+	pr_devel("  -> CDR %s\n", pci_name(dev));
+
+	*size = *align = 0;
+
+	/* Clear the resources out and mark them all unset */
+	for (i = 0; i <= PCI_ROM_RESOURCE; i++) {
+		r = &dev->resource[i];
+		if (!(r->flags & flags))
+		    continue;
+		if (r->start) {
+			r->end -= r->start;
+			r->start = 0;
+		}
+		r->flags |= IORESOURCE_UNSET;
+	}
+
+	/* We currently keep all memory resources together, we
+	 * will handle prefetch & 64-bit separately in the future
+	 * but for now we stick everybody in M32
+	 */
+	start = 0;
+	for (;;) {
+		resource_size_t max_size = 0;
+		int max_no = -1;
+
+		/* Find next biggest resource */
+		for (i = 0; i <= PCI_ROM_RESOURCE; i++) {
+			r = &dev->resource[i];
+			if (!(r->flags & IORESOURCE_UNSET) ||
+			    !(r->flags & flags))
+				continue;
+			if (resource_size(r) > max_size) {
+				max_size = resource_size(r);
+				max_no = i;
+			}
+		}
+		if (max_no < 0)
+			break;
+		r = &dev->resource[max_no];
+		if (max_size > *align)
+			*align = max_size;
+		*size += max_size;
+		r->start = start;
+		start += max_size;
+		r->end = r->start + max_size - 1;
+		r->flags &= ~IORESOURCE_UNSET;
+		pr_devel("  ->     R%d %016llx..%016llx\n",
+			 max_no, r->start, r->end);
+	}
+	pr_devel("  <- CDR %s size=%llx align=%llx\n",
+		 pci_name(dev), *size, *align);
+}
+
+/* Allocate a resource "wrap" for a given device or bridge and
+ * insert it at the right position in the sorted list
+ */
+static void __devinit pnv_ioda_add_wrap(struct list_head *list,
+					struct pci_bus *bus,
+					struct pci_dev *dev,
+					resource_size_t size,
+					resource_size_t align)
+{
+	struct resource_wrap *w1, *w = kzalloc(sizeof(*w), GFP_KERNEL);
+
+	w->size = size;
+	w->align = align;
+	w->dev = dev;
+	w->bus = bus;
+
+	list_for_each_entry(w1, list, link) {
+		if (w1->align < align) {
+			list_add_tail(&w->link, &w1->link);
+			return;
+		}
+	}
+	list_add_tail(&w->link, list);
+}
+
+/* Offset device resources of a given type */
+static void __devinit pnv_ioda_offset_dev(struct pci_dev *dev,
+					  unsigned int flags,
+					  resource_size_t offset)
+{
+	struct resource *r;
+	int i;
+
+	pr_devel("  -> ODR %s [%x] +%016llx\n", pci_name(dev), flags, offset);
+
+	for (i = 0; i <= PCI_ROM_RESOURCE; i++) {
+		r = &dev->resource[i];
+		if (r->flags & flags) {
+			dev->resource[i].start += offset;
+			dev->resource[i].end += offset;
+		}
+	}
+
+	pr_devel("  <- ODR %s [%x] +%016llx\n", pci_name(dev), flags, offset);
+}
+
+/* Offset bus resources (& all children) of a given type */
+static void __devinit pnv_ioda_offset_bus(struct pci_bus *bus,
+					  unsigned int flags,
+					  resource_size_t offset)
+{
+	struct resource *r;
+	struct pci_dev *dev;
+	struct pci_bus *cbus;
+	int i;
+
+	pr_devel("  -> OBR %s [%x] +%016llx\n",
+		 bus->self ? pci_name(bus->self) : "root", flags, offset);
+
+	for (i = 0; i < 2; i++) {
+		r = bus->resource[i];
+		if (r && (r->flags & flags)) {
+			bus->resource[i]->start += offset;
+			bus->resource[i]->end += offset;
+		}
+	}
+	list_for_each_entry(dev, &bus->devices, bus_list)
+		pnv_ioda_offset_dev(dev, flags, offset);
+	list_for_each_entry(cbus, &bus->children, node)
+		pnv_ioda_offset_bus(cbus, flags, offset);
+
+	pr_devel("  <- OBR %s [%x]\n",
+		 bus->self ? pci_name(bus->self) : "root", flags);
+}
+
+/* This is the guts of our IODA resource allocation. This is called
+ * recursively for each bus in the system. It calculates all the
+ * necessary size and requirements for children and assign them
+ * resources such that:
+ *
+ *   - Each function fits in it's own contiguous set of IO/M32
+ *     segment
+ *
+ *   - All segments behind a P2P bridge are contiguous and obey
+ *     alignment constraints of those bridges
+ */
+static void __devinit pnv_ioda_calc_bus(struct pci_bus *bus, unsigned int flags,
+					resource_size_t *size,
+					resource_size_t *align)
+{
+	struct pci_controller *hose = pci_bus_to_host(bus);
+	struct pnv_phb *phb = hose->private_data;
+	resource_size_t dev_size, dev_align, start;
+	resource_size_t min_align, min_balign;
+	struct pci_dev *cdev;
+	struct pci_bus *cbus;
+	struct list_head head;
+	struct resource_wrap *w;
+	unsigned int bres;
+
+	*size = *align = 0;
+
+	pr_devel("-> CBR %s [%x]\n",
+		 bus->self ? pci_name(bus->self) : "root", flags);
+
+	/* Calculate alignment requirements based on the type
+	 * of resource we are working on
+	 */
+	if (flags & IORESOURCE_IO) {
+		bres = 0;
+		min_align = phb->ioda.io_segsize;
+		min_balign = 0x1000;
+	} else {
+		bres = 1;
+		min_align = phb->ioda.m32_segsize;
+		min_balign = 0x100000;
+	}
+
+	/* Gather all our children resources ordered by alignment */
+	INIT_LIST_HEAD(&head);
+
+	/*   - Busses */
+	list_for_each_entry(cbus, &bus->children, node) {
+		pnv_ioda_calc_bus(cbus, flags, &dev_size, &dev_align);
+		pnv_ioda_add_wrap(&head, cbus, NULL, dev_size, dev_align);
+	}
+
+	/*   - Devices */
+	list_for_each_entry(cdev, &bus->devices, bus_list) {
+		pnv_ioda_calc_dev(cdev, flags, &dev_size, &dev_align);
+		/* Align them to segment size */
+		if (dev_align < min_align)
+			dev_align = min_align;
+		pnv_ioda_add_wrap(&head, NULL, cdev, dev_size, dev_align);
+	}
+	if (list_empty(&head))
+		goto empty;
+
+	/* Now we can do two things: assign offsets to them within that
+	 * level and get our total alignment & size requirements. The
+	 * assignment algorithm is going to be uber-trivial for now, we
+	 * can try to be smarter later at filling out holes.
+	 */
+	start = bus->self ? 0 : bus->resource[bres]->start;
+
+	/* Don't hand out IO 0 */
+	if ((flags & IORESOURCE_IO) && !bus->self)
+		start += 0x1000;
+
+	while(!list_empty(&head)) {
+		w = list_first_entry(&head, struct resource_wrap, link);
+		list_del(&w->link);
+		if (w->size) {
+			if (start) {
+				start = ALIGN(start, w->align);
+				if (w->dev)
+					pnv_ioda_offset_dev(w->dev,flags,start);
+				else if (w->bus)
+					pnv_ioda_offset_bus(w->bus,flags,start);
+			}
+			if (w->align > *align)
+				*align = w->align;
+		}
+		start += w->size;
+		kfree(w);
+	}
+	*size = start;
+
+	/* Align and setup bridge resources */
+	*align = max_t(resource_size_t, *align,
+		       max_t(resource_size_t, min_align, min_balign));
+	*size = ALIGN(*size,
+		      max_t(resource_size_t, min_align, min_balign));
+ empty:
+	/* Only setup P2P's, not the PHB itself */
+	if (bus->self) {
+		WARN_ON(bus->resource[bres] == NULL);
+		bus->resource[bres]->start = 0;
+		bus->resource[bres]->flags = (*size) ? flags : 0;
+		bus->resource[bres]->end = (*size) ? (*size - 1) : 0;
+
+		/* Clear prefetch bus resources for now */
+		bus->resource[2]->flags = 0;
+	}
+
+	pr_devel("<- CBR %s [%x] *size=%016llx *align=%016llx\n",
+		 bus->self ? pci_name(bus->self) : "root", flags,*size,*align);
+}
+
+static struct pci_dn *pnv_ioda_get_pdn(struct pci_dev *dev)
+{
+	struct device_node *np;
+
+	np = pci_device_to_OF_node(dev);
+	if (!np)
+		return NULL;
+	return PCI_DN(np);
+}
+
+static void __devinit pnv_ioda_setup_pe_segments(struct pci_dev *dev)
+{
+	struct pci_controller *hose = pci_bus_to_host(dev->bus);
+	struct pnv_phb *phb = hose->private_data;
+	struct pci_dn *pdn = pnv_ioda_get_pdn(dev);
+	unsigned int pe, i;
+	resource_size_t pos;
+	struct resource io_res;
+	struct resource m32_res;
+	struct pci_bus_region region;
+	int rc;
+
+	/* Anything not referenced in the device-tree gets PE#0 */
+	pe = pdn ? pdn->pe_number : 0;
+
+	/* Calculate the device min/max */
+	io_res.start = m32_res.start = (resource_size_t)-1;
+	io_res.end = m32_res.end = 0;
+	io_res.flags = IORESOURCE_IO;
+	m32_res.flags = IORESOURCE_MEM;
+
+	for (i = 0; i <= PCI_ROM_RESOURCE; i++) {
+		struct resource *r = NULL;
+		if (dev->resource[i].flags & IORESOURCE_IO)
+			r = &io_res;
+		if (dev->resource[i].flags & IORESOURCE_MEM)
+			r = &m32_res;
+		if (!r)
+			continue;
+		if (dev->resource[i].start < r->start)
+			r->start = dev->resource[i].start;
+		if (dev->resource[i].end > r->end)
+			r->end = dev->resource[i].end;
+	}
+
+	/* Setup IO segments */
+	if (io_res.start < io_res.end) {
+		pcibios_resource_to_bus(dev, &region, &io_res);
+		pos = region.start;
+		i = pos / phb->ioda.io_segsize;
+		while(i < phb->ioda.total_pe && pos <= region.end) {
+			if (phb->ioda.io_segmap[i]) {
+				pr_err("%s: Trying to use IO seg #%d which is"
+				       " already used by PE# %d\n",
+				       pci_name(dev), i,
+				       phb->ioda.io_segmap[i]);
+				/* XXX DO SOMETHING TO DISABLE DEVICE ? */
+				break;
+			}
+			phb->ioda.io_segmap[i] = pe;
+			rc = opal_pci_map_pe_mmio_window(phb->opal_id, pe,
+							 OPAL_IO_WINDOW_TYPE,
+							 0, i);
+			if (rc != OPAL_SUCCESS) {
+				pr_err("%s: OPAL error %d setting up mapping"
+				       " for IO seg# %d\n",
+				       pci_name(dev), rc, i);
+				/* XXX DO SOMETHING TO DISABLE DEVICE ? */
+				break;
+			}
+			pos += phb->ioda.io_segsize;
+			i++;
+		};
+	}
+
+	/* Setup M32 segments */
+	if (m32_res.start < m32_res.end) {
+		pcibios_resource_to_bus(dev, &region, &m32_res);
+		pos = region.start;
+		i = pos / phb->ioda.m32_segsize;
+		while(i < phb->ioda.total_pe && pos <= region.end) {
+			if (phb->ioda.m32_segmap[i]) {
+				pr_err("%s: Trying to use M32 seg #%d which is"
+				       " already used by PE# %d\n",
+				       pci_name(dev), i,
+				       phb->ioda.m32_segmap[i]);
+				/* XXX DO SOMETHING TO DISABLE DEVICE ? */
+				break;
+			}
+			phb->ioda.m32_segmap[i] = pe;
+			rc = opal_pci_map_pe_mmio_window(phb->opal_id, pe,
+							 OPAL_M32_WINDOW_TYPE,
+							 0, i);
+			if (rc != OPAL_SUCCESS) {
+				pr_err("%s: OPAL error %d setting up mapping"
+				       " for M32 seg# %d\n",
+				       pci_name(dev), rc, i);
+				/* XXX DO SOMETHING TO DISABLE DEVICE ? */
+				break;
+			}
+			pos += phb->ioda.m32_segsize;
+			i++;
+		}
+	}
+}
+
+/* Check if a resource still fits in the total IO or M32 range
+ * for a given PHB
+ */
+static int __devinit pnv_ioda_resource_fit(struct pci_controller *hose,
+					   struct resource *r)
+{
+	struct resource *bounds;
+
+	if (r->flags & IORESOURCE_IO)
+		bounds = &hose->io_resource;
+	else if (r->flags & IORESOURCE_MEM)
+		bounds = &hose->mem_resources[0];
+	else
+		return 1;
+
+	if (r->start >= bounds->start && r->end <= bounds->end)
+		return 1;
+	r->flags = 0;
+	return 0;
+}
+
+static void __devinit pnv_ioda_update_resources(struct pci_bus *bus)
+{
+	struct pci_controller *hose = pci_bus_to_host(bus);
+	struct pci_bus *cbus;
+	struct pci_dev *cdev;
+	unsigned int i;
+
+	/* We used to clear all device enables here. However it looks like
+	 * clearing MEM enable causes Obsidian (IPR SCS) to go bonkers,
+	 * and shoot fatal errors to the PHB which in turns fences itself
+	 * and we can't recover from that ... yet. So for now, let's leave
+	 * the enables as-is and hope for the best.
+	 */
+
+	/* Check if bus resources fit in our IO or M32 range */
+	for (i = 0; bus->self && (i < 2); i++) {
+		struct resource *r = bus->resource[i];
+		if (r && !pnv_ioda_resource_fit(hose, r))
+			pr_err("%s: Bus %d resource %d disabled, no room\n",
+			       pci_name(bus->self), bus->number, i);
+	}
+
+	/* Update self if it's not a PHB */
+	if (bus->self)
+		pci_setup_bridge(bus);
+
+	/* Update child devices */
+	list_for_each_entry(cdev, &bus->devices, bus_list) {
+		/* Check if resource fits, if not, disabled it */
+		for (i = 0; i <= PCI_ROM_RESOURCE; i++) {
+			struct resource *r = &cdev->resource[i];
+			if (!pnv_ioda_resource_fit(hose, r))
+				pr_err("%s: Resource %d disabled, no room\n",
+				       pci_name(cdev), i);
+		}
+
+		/* Assign segments */
+		pnv_ioda_setup_pe_segments(cdev);
+
+		/* Update HW BARs */
+		for (i = 0; i <= PCI_ROM_RESOURCE; i++)
+			pci_update_resource(cdev, i);
+	}
+
+	/* Update child busses */
+	list_for_each_entry(cbus, &bus->children, node)
+		pnv_ioda_update_resources(cbus);
+}
+
+static int __devinit pnv_ioda_alloc_pe(struct pnv_phb *phb)
+{
+	unsigned long pe;
+
+	do {
+		pe = find_next_zero_bit(phb->ioda.pe_alloc,
+					phb->ioda.total_pe, 0);
+		if (pe >= phb->ioda.total_pe)
+			return IODA_INVALID_PE;
+	} while(test_and_set_bit(pe, phb->ioda.pe_alloc));
+
+	phb->ioda.pe_array[pe].pe_number = pe;
+	return pe;
+}
+
+static void __devinit pnv_ioda_free_pe(struct pnv_phb *phb, int pe)
+{
+	WARN_ON(phb->ioda.pe_array[pe].pdev);
+
+	memset(&phb->ioda.pe_array[pe], 0, sizeof(struct pnv_ioda_pe));
+	clear_bit(pe, phb->ioda.pe_alloc);
+}
+
+/* Currently those 2 are only used when MSIs are enabled, this will change
+ * but in the meantime, we need to protect them to avoid warnings
+ */
+#ifdef CONFIG_PCI_MSI
+static struct pnv_ioda_pe * __devinit __pnv_ioda_get_one_pe(struct pci_dev *dev)
+{
+	struct pci_controller *hose = pci_bus_to_host(dev->bus);
+	struct pnv_phb *phb = hose->private_data;
+	struct pci_dn *pdn = pnv_ioda_get_pdn(dev);
+
+	if (!pdn)
+		return NULL;
+	if (pdn->pe_number == IODA_INVALID_PE)
+		return NULL;
+	return &phb->ioda.pe_array[pdn->pe_number];
+}
+
+static struct pnv_ioda_pe * __devinit pnv_ioda_get_pe(struct pci_dev *dev)
+{
+	struct pnv_ioda_pe *pe = __pnv_ioda_get_one_pe(dev);
+
+	while (!pe && dev->bus->self) {
+		dev = dev->bus->self;
+		pe = __pnv_ioda_get_one_pe(dev);
+		if (pe)
+			pe = pe->bus_pe;
+	}
+	return pe;
+}
+#endif /* CONFIG_PCI_MSI */
+
+static int __devinit pnv_ioda_configure_pe(struct pnv_phb *phb,
+					   struct pnv_ioda_pe *pe)
+{
+	struct pci_dev *parent;
+	uint8_t bcomp, dcomp, fcomp;
+	long rc, rid_end, rid;
+
+	/* Bus validation ? */
+	if (pe->pbus) {
+		int count;
+
+		dcomp = OPAL_IGNORE_RID_DEVICE_NUMBER;
+		fcomp = OPAL_IGNORE_RID_FUNCTION_NUMBER;
+		parent = pe->pbus->self;
+		count = pe->pbus->subordinate - pe->pbus->secondary + 1;
+		switch(count) {
+		case  1: bcomp = OpalPciBusAll;		break;
+		case  2: bcomp = OpalPciBus7Bits;	break;
+		case  4: bcomp = OpalPciBus6Bits;	break;
+		case  8: bcomp = OpalPciBus5Bits;	break;
+		case 16: bcomp = OpalPciBus4Bits;	break;
+		case 32: bcomp = OpalPciBus3Bits;	break;
+		default:
+			pr_err("%s: Number of subordinate busses %d"
+			       " unsupported\n",
+			       pci_name(pe->pbus->self), count);
+			/* Do an exact match only */
+			bcomp = OpalPciBusAll;
+		}
+		rid_end = pe->rid + (count << 8);
+	} else {
+		parent = pe->pdev->bus->self;
+		bcomp = OpalPciBusAll;
+		dcomp = OPAL_COMPARE_RID_DEVICE_NUMBER;
+		fcomp = OPAL_COMPARE_RID_FUNCTION_NUMBER;
+		rid_end = pe->rid + 1;
+	}
+
+	/* Associate PE in PELT */
+	rc = opal_pci_set_pe(phb->opal_id, pe->pe_number, pe->rid,
+			     bcomp, dcomp, fcomp, OPAL_MAP_PE);
+	if (rc) {
+		pe_err(pe, "OPAL error %ld trying to setup PELT table\n", rc);
+		return -ENXIO;
+	}
+	opal_pci_eeh_freeze_clear(phb->opal_id, pe->pe_number,
+				  OPAL_EEH_ACTION_CLEAR_FREEZE_ALL);
+
+	/* Add to all parents PELT-V */
+	while (parent) {
+		struct pci_dn *pdn = pnv_ioda_get_pdn(parent);
+		if (pdn && pdn->pe_number != IODA_INVALID_PE) {
+			rc = opal_pci_set_peltv(phb->opal_id, pdn->pe_number,
+						pe->pe_number, OPAL_ADD_PE_TO_DOMAIN);
+			/* XXX What to do in case of error ? */
+		}
+		parent = parent->bus->self;
+	}
+	/* Setup reverse map */
+	for (rid = pe->rid; rid < rid_end; rid++)
+		phb->ioda.pe_rmap[rid] = pe->pe_number;
+
+	/* Setup one MVTs on IODA1 */
+	if (phb->type == PNV_PHB_IODA1) {
+		pe->mve_number = pe->pe_number;
+		rc = opal_pci_set_mve(phb->opal_id, pe->mve_number,
+				      pe->pe_number);
+		if (rc) {
+			pe_err(pe, "OPAL error %ld setting up MVE %d\n",
+			       rc, pe->mve_number);
+			pe->mve_number = -1;
+		} else {
+			rc = opal_pci_set_mve_enable(phb->opal_id,
+						     pe->mve_number, OPAL_ENABLE_MVE);
+			if (rc) {
+				pe_err(pe, "OPAL error %ld enabling MVE %d\n",
+				       rc, pe->mve_number);
+				pe->mve_number = -1;
+			}
+		}
+	} else if (phb->type == PNV_PHB_IODA2)
+		pe->mve_number = 0;
+
+	return 0;
+}
+
+static void __devinit pnv_ioda_link_pe_by_weight(struct pnv_phb *phb,
+						 struct pnv_ioda_pe *pe)
+{
+	struct pnv_ioda_pe *lpe;
+
+	list_for_each_entry(lpe, &phb->ioda.pe_list, link) {
+		if (lpe->dma_weight < pe->dma_weight) {
+			list_add_tail(&pe->link, &lpe->link);
+			return;
+		}
+	}
+	list_add_tail(&pe->link, &phb->ioda.pe_list);
+}
+
+static unsigned int pnv_ioda_dma_weight(struct pci_dev *dev)
+{
+	/* This is quite simplistic. The "base" weight of a device
+	 * is 10. 0 means no DMA is to be accounted for it.
+	 */
+
+	/* If it's a bridge, no DMA */
+	if (dev->hdr_type != PCI_HEADER_TYPE_NORMAL)
+		return 0;
+
+	/* Reduce the weight of slow USB controllers */
+	if (dev->class == PCI_CLASS_SERIAL_USB_UHCI ||
+	    dev->class == PCI_CLASS_SERIAL_USB_OHCI ||
+	    dev->class == PCI_CLASS_SERIAL_USB_EHCI)
+		return 3;
+
+	/* Increase the weight of RAID (includes Obsidian) */
+	if ((dev->class >> 8) == PCI_CLASS_STORAGE_RAID)
+		return 15;
+
+	/* Default */
+	return 10;
+}
+
+static struct pnv_ioda_pe * __devinit pnv_ioda_setup_dev_PE(struct pci_dev *dev)
+{
+	struct pci_controller *hose = pci_bus_to_host(dev->bus);
+	struct pnv_phb *phb = hose->private_data;
+	struct pci_dn *pdn = pnv_ioda_get_pdn(dev);
+	struct pnv_ioda_pe *pe;
+	int pe_num;
+
+	if (!pdn) {
+		pr_err("%s: Device tree node not associated properly\n",
+			   pci_name(dev));
+		return NULL;
+	}
+	if (pdn->pe_number != IODA_INVALID_PE)
+		return NULL;
+
+	/* PE#0 has been pre-set */
+	if (dev->bus->number == 0)
+		pe_num = 0;
+	else
+		pe_num = pnv_ioda_alloc_pe(phb);
+	if (pe_num == IODA_INVALID_PE) {
+		pr_warning("%s: Not enough PE# available, disabling device\n",
+			   pci_name(dev));
+		return NULL;
+	}
+
+	/* NOTE: We get only one ref to the pci_dev for the pdn, not for the
+	 * pointer in the PE data structure, both should be destroyed at the
+	 * same time. However, this needs to be looked at more closely again
+	 * once we actually start removing things (Hotplug, SR-IOV, ...)
+	 *
+	 * At some point we want to remove the PDN completely anyways
+	 */
+	pe = &phb->ioda.pe_array[pe_num];
+	pci_dev_get(dev);
+	pdn->pcidev = dev;
+	pdn->pe_number = pe_num;
+	pe->pdev = dev;
+	pe->pbus = NULL;
+	pe->tce32_seg = -1;
+	pe->mve_number = -1;
+	pe->rid = dev->bus->number << 8 | pdn->devfn;
+
+	pe_info(pe, "Associated device to PE\n");
+
+	if (pnv_ioda_configure_pe(phb, pe)) {
+		/* XXX What do we do here ? */
+		if (pe_num)
+			pnv_ioda_free_pe(phb, pe_num);
+		pdn->pe_number = IODA_INVALID_PE;
+		pe->pdev = NULL;
+		pci_dev_put(dev);
+		return NULL;
+	}
+
+	/* Assign a DMA weight to the device */
+	pe->dma_weight = pnv_ioda_dma_weight(dev);
+	if (pe->dma_weight != 0) {
+		phb->ioda.dma_weight += pe->dma_weight;
+		phb->ioda.dma_pe_count++;
+	}
+
+	/* Link the PE */
+	pnv_ioda_link_pe_by_weight(phb, pe);
+
+	return pe;
+}
+
+static void pnv_ioda_setup_same_PE(struct pci_bus *bus, struct pnv_ioda_pe *pe)
+{
+	struct pci_dev *dev;
+
+	list_for_each_entry(dev, &bus->devices, bus_list) {
+		struct pci_dn *pdn = pnv_ioda_get_pdn(dev);
+
+		if (pdn == NULL) {
+			pr_warn("%s: No device node associated with device !\n",
+				pci_name(dev));
+			continue;
+		}
+		pci_dev_get(dev);
+		pdn->pcidev = dev;
+		pdn->pe_number = pe->pe_number;
+		pe->dma_weight += pnv_ioda_dma_weight(dev);
+		if (dev->subordinate)
+			pnv_ioda_setup_same_PE(dev->subordinate, pe);
+	}
+}
+
+static void __devinit pnv_ioda_setup_bus_PE(struct pci_dev *dev,
+					    struct pnv_ioda_pe *ppe)
+{
+	struct pci_controller *hose = pci_bus_to_host(dev->bus);
+	struct pnv_phb *phb = hose->private_data;
+	struct pci_bus *bus = dev->subordinate;
+	struct pnv_ioda_pe *pe;
+	int pe_num;
+
+	if (!bus) {
+		pr_warning("%s: Bridge without a subordinate bus !\n",
+			   pci_name(dev));
+		return;
+	}
+	pe_num = pnv_ioda_alloc_pe(phb);
+	if (pe_num == IODA_INVALID_PE) {
+		pr_warning("%s: Not enough PE# available, disabling bus\n",
+			   pci_name(dev));
+		return;
+	}
+
+	pe = &phb->ioda.pe_array[pe_num];
+	ppe->bus_pe = pe;
+	pe->pbus = bus;
+	pe->pdev = NULL;
+	pe->tce32_seg = -1;
+	pe->mve_number = -1;
+	pe->rid = bus->secondary << 8;
+	pe->dma_weight = 0;
+
+	pe_info(pe, "Secondary busses %d..%d associated with PE\n",
+		bus->secondary, bus->subordinate);
+
+	if (pnv_ioda_configure_pe(phb, pe)) {
+		/* XXX What do we do here ? */
+		if (pe_num)
+			pnv_ioda_free_pe(phb, pe_num);
+		pe->pbus = NULL;
+		return;
+	}
+
+	/* Associate it with all child devices */
+	pnv_ioda_setup_same_PE(bus, pe);
+
+	/* Account for one DMA PE if at least one DMA capable device exist
+	 * below the bridge
+	 */
+	if (pe->dma_weight != 0) {
+		phb->ioda.dma_weight += pe->dma_weight;
+		phb->ioda.dma_pe_count++;
+	}
+
+	/* Link the PE */
+	pnv_ioda_link_pe_by_weight(phb, pe);
+}
+
+static void __devinit pnv_ioda_setup_PEs(struct pci_bus *bus)
+{
+	struct pci_dev *dev;
+	struct pnv_ioda_pe *pe;
+
+	list_for_each_entry(dev, &bus->devices, bus_list) {
+		pe = pnv_ioda_setup_dev_PE(dev);
+		if (pe == NULL)
+			continue;
+		/* Leaving the PCIe domain ... single PE# */
+		if (dev->pcie_type == PCI_EXP_TYPE_PCI_BRIDGE)
+			pnv_ioda_setup_bus_PE(dev, pe);
+		else if (dev->subordinate)
+			pnv_ioda_setup_PEs(dev->subordinate);
+	}
+}
+
+static void __devinit pnv_pci_ioda_dma_dev_setup(struct pnv_phb *phb,
+						 struct pci_dev *dev)
+{
+	/* We delay DMA setup after we have assigned all PE# */
+}
+
+static void __devinit pnv_ioda_setup_bus_dma(struct pnv_ioda_pe *pe,
+					     struct pci_bus *bus)
+{
+	struct pci_dev *dev;
+
+	list_for_each_entry(dev, &bus->devices, bus_list) {
+		set_iommu_table_base(&dev->dev, &pe->tce32_table);
+		if (dev->subordinate)
+			pnv_ioda_setup_bus_dma(pe, dev->subordinate);
+	}
+}
+
+static void __devinit pnv_pci_ioda_setup_dma_pe(struct pnv_phb *phb,
+						struct pnv_ioda_pe *pe,
+						unsigned int base,
+						unsigned int segs)
+{
+
+	struct page *tce_mem = NULL;
+	const __be64 *swinvp;
+	struct iommu_table *tbl;
+	unsigned int i;
+	int64_t rc;
+	void *addr;
+
+	/* 256M DMA window, 4K TCE pages, 8 bytes TCE */
+#define TCE32_TABLE_SIZE	((0x10000000 / 0x1000) * 8)
+
+	/* XXX FIXME: Handle 64-bit only DMA devices */
+	/* XXX FIXME: Provide 64-bit DMA facilities & non-4K TCE tables etc.. */
+	/* XXX FIXME: Allocate multi-level tables on PHB3 */
+
+	/* We shouldn't already have a 32-bit DMA associated */
+	if (WARN_ON(pe->tce32_seg >= 0))
+		return;
+
+	/* Grab a 32-bit TCE table */
+	pe->tce32_seg = base;
+	pe_info(pe, " Setting up 32-bit TCE table at %08x..%08x\n",
+		(base << 28), ((base + segs) << 28) - 1);
+
+	/* XXX Currently, we allocate one big contiguous table for the
+	 * TCEs. We only really need one chunk per 256M of TCE space
+	 * (ie per segment) but that's an optimization for later, it
+	 * requires some added smarts with our get/put_tce implementation
+	 */
+	tce_mem = alloc_pages_node(phb->hose->node, GFP_KERNEL,
+				   get_order(TCE32_TABLE_SIZE * segs));
+	if (!tce_mem) {
+		pe_err(pe, " Failed to allocate a 32-bit TCE memory\n");
+		goto fail;
+	}
+	addr = page_address(tce_mem);
+	memset(addr, 0, TCE32_TABLE_SIZE * segs);
+
+	/* Configure HW */
+	for (i = 0; i < segs; i++) {
+		rc = opal_pci_map_pe_dma_window(phb->opal_id,
+					      pe->pe_number,
+					      base + i, 1,
+					      __pa(addr) + TCE32_TABLE_SIZE * i,
+					      TCE32_TABLE_SIZE, 0x1000);
+		if (rc) {
+			pe_err(pe, " Failed to configure 32-bit TCE table,"
+			       " err %ld\n", rc);
+			goto fail;
+		}
+	}
+
+	/* Setup linux iommu table */
+	tbl = &pe->tce32_table;
+	pnv_pci_setup_iommu_table(tbl, addr, TCE32_TABLE_SIZE * segs,
+				  base << 28);
+
+	/* OPAL variant of P7IOC SW invalidated TCEs */
+	swinvp = of_get_property(phb->hose->dn, "ibm,opal-tce-kill", NULL);
+	if (swinvp) {
+		/* We need a couple more fields -- an address and a data
+		 * to or.  Since the bus is only printed out on table free
+		 * errors, and on the first pass the data will be a relative
+		 * bus number, print that out instead.
+		 */
+		tbl->it_busno = 0;
+		tbl->it_index = (unsigned long)ioremap(be64_to_cpup(swinvp), 8);
+		tbl->it_type = TCE_PCI_SWINV_CREATE | TCE_PCI_SWINV_FREE
+			| TCE_PCI_SWINV_PAIR;
+	}
+	iommu_init_table(tbl, phb->hose->node);
+
+	if (pe->pdev)
+		set_iommu_table_base(&pe->pdev->dev, tbl);
+	else
+		pnv_ioda_setup_bus_dma(pe, pe->pbus);
+
+	return;
+ fail:
+	/* XXX Failure: Try to fallback to 64-bit only ? */
+	if (pe->tce32_seg >= 0)
+		pe->tce32_seg = -1;
+	if (tce_mem)
+		__free_pages(tce_mem, get_order(TCE32_TABLE_SIZE * segs));
+}
+
+static void __devinit pnv_ioda_setup_dma(struct pnv_phb *phb)
+{
+	struct pci_controller *hose = phb->hose;
+	unsigned int residual, remaining, segs, tw, base;
+	struct pnv_ioda_pe *pe;
+
+	/* If we have more PE# than segments available, hand out one
+	 * per PE until we run out and let the rest fail. If not,
+	 * then we assign at least one segment per PE, plus more based
+	 * on the amount of devices under that PE
+	 */
+	if (phb->ioda.dma_pe_count > phb->ioda.tce32_count)
+		residual = 0;
+	else
+		residual = phb->ioda.tce32_count -
+			phb->ioda.dma_pe_count;
+
+	pr_info("PCI: Domain %04x has %ld available 32-bit DMA segments\n",
+		hose->global_number, phb->ioda.tce32_count);
+	pr_info("PCI: %d PE# for a total weight of %d\n",
+		phb->ioda.dma_pe_count, phb->ioda.dma_weight);
+
+	/* Walk our PE list and configure their DMA segments, hand them
+	 * out one base segment plus any residual segments based on
+	 * weight
+	 */
+	remaining = phb->ioda.tce32_count;
+	tw = phb->ioda.dma_weight;
+	base = 0;
+	list_for_each_entry(pe, &phb->ioda.pe_list, link) {
+		if (!pe->dma_weight)
+			continue;
+		if (!remaining) {
+			pe_warn(pe, "No DMA32 resources available\n");
+			continue;
+		}
+		segs = 1;
+		if (residual) {
+			segs += ((pe->dma_weight * residual)  + (tw / 2)) / tw;
+			if (segs > remaining)
+				segs = remaining;
+		}
+		pe_info(pe, "DMA weight %d, assigned %d DMA32 segments\n",
+			pe->dma_weight, segs);
+		pnv_pci_ioda_setup_dma_pe(phb, pe, base, segs);
+		remaining -= segs;
+		base += segs;
+	}
+}
+
+#ifdef CONFIG_PCI_MSI
+static int pnv_pci_ioda_msi_setup(struct pnv_phb *phb, struct pci_dev *dev,
+				  unsigned int hwirq, unsigned int is_64,
+				  struct msi_msg *msg)
+{
+	struct pnv_ioda_pe *pe = pnv_ioda_get_pe(dev);
+	unsigned int xive_num = hwirq - phb->msi_base;
+	uint64_t addr64;
+	uint32_t addr32, data;
+	int rc;
+
+	/* No PE assigned ? bail out ... no MSI for you ! */
+	if (pe == NULL)
+		return -ENXIO;
+
+	/* Check if we have an MVE */
+	if (pe->mve_number < 0)
+		return -ENXIO;
+
+	/* Assign XIVE to PE */
+	rc = opal_pci_set_xive_pe(phb->opal_id, pe->pe_number, xive_num);
+	if (rc) {
+		pr_warn("%s: OPAL error %d setting XIVE %d PE\n",
+			pci_name(dev), rc, xive_num);
+		return -EIO;
+	}
+
+	if (is_64) {
+		rc = opal_get_msi_64(phb->opal_id, pe->mve_number, xive_num, 1,
+				     &addr64, &data);
+		if (rc) {
+			pr_warn("%s: OPAL error %d getting 64-bit MSI data\n",
+				pci_name(dev), rc);
+			return -EIO;
+		}
+		msg->address_hi = addr64 >> 32;
+		msg->address_lo = addr64 & 0xfffffffful;
+	} else {
+		rc = opal_get_msi_32(phb->opal_id, pe->mve_number, xive_num, 1,
+				     &addr32, &data);
+		if (rc) {
+			pr_warn("%s: OPAL error %d getting 32-bit MSI data\n",
+				pci_name(dev), rc);
+			return -EIO;
+		}
+		msg->address_hi = 0;
+		msg->address_lo = addr32;
+	}
+	msg->data = data;
+
+	pr_devel("%s: %s-bit MSI on hwirq %x (xive #%d),"
+		 " address=%x_%08x data=%x PE# %d\n",
+		 pci_name(dev), is_64 ? "64" : "32", hwirq, xive_num,
+		 msg->address_hi, msg->address_lo, data, pe->pe_number);
+
+	return 0;
+}
+
+static void pnv_pci_init_ioda_msis(struct pnv_phb *phb)
+{
+	unsigned int bmap_size;
+	const __be32 *prop = of_get_property(phb->hose->dn,
+					     "ibm,opal-msi-ranges", NULL);
+	if (!prop) {
+		/* BML Fallback */
+		prop = of_get_property(phb->hose->dn, "msi-ranges", NULL);
+	}
+	if (!prop)
+		return;
+
+	phb->msi_base = be32_to_cpup(prop);
+	phb->msi_count = be32_to_cpup(prop + 1);
+	bmap_size = BITS_TO_LONGS(phb->msi_count) * sizeof(unsigned long);
+	phb->msi_map = zalloc_maybe_bootmem(bmap_size, GFP_KERNEL);
+	if (!phb->msi_map) {
+		pr_err("PCI %d: Failed to allocate MSI bitmap !\n",
+		       phb->hose->global_number);
+		return;
+	}
+	phb->msi_setup = pnv_pci_ioda_msi_setup;
+	phb->msi32_support = 1;
+	pr_info("  Allocated bitmap for %d MSIs (base IRQ 0x%x)\n",
+		phb->msi_count, phb->msi_base);
+}
+#else
+static void pnv_pci_init_ioda_msis(struct pnv_phb *phb) { }
+#endif /* CONFIG_PCI_MSI */
+
+/* This is the starting point of our IODA specific resource
+ * allocation process
+ */
+static void __devinit pnv_pci_ioda_fixup_phb(struct pci_controller *hose)
+{
+	resource_size_t size, align;
+	struct pci_bus *child;
+
+	/* Associate PEs per functions */
+	pnv_ioda_setup_PEs(hose->bus);
+
+	/* Calculate all resources */
+	pnv_ioda_calc_bus(hose->bus, IORESOURCE_IO, &size, &align);
+	pnv_ioda_calc_bus(hose->bus, IORESOURCE_MEM, &size, &align);
+
+	/* Apply then to HW */
+	pnv_ioda_update_resources(hose->bus);
+
+	/* Setup DMA */
+	pnv_ioda_setup_dma(hose->private_data);
+
+	/* Configure PCI Express settings */
+	list_for_each_entry(child, &hose->bus->children, node) {
+		struct pci_dev *self = child->self;
+		if (!self)
+			continue;
+		pcie_bus_configure_settings(child, self->pcie_mpss);
+	}
+}
+
+/* Prevent enabling devices for which we couldn't properly
+ * assign a PE
+ */
+static int __devinit pnv_pci_enable_device_hook(struct pci_dev *dev)
+{
+	struct pci_dn *pdn = pnv_ioda_get_pdn(dev);
+
+	if (!pdn || pdn->pe_number == IODA_INVALID_PE)
+		return -EINVAL;
+	return 0;
+}
+
+static u32 pnv_ioda_bdfn_to_pe(struct pnv_phb *phb, struct pci_bus *bus,
+			       u32 devfn)
+{
+	return phb->ioda.pe_rmap[(bus->number << 8) | devfn];
+}
+
+void __init pnv_pci_init_ioda1_phb(struct device_node *np)
+{
+	struct pci_controller *hose;
+	static int primary = 1;
+	struct pnv_phb *phb;
+	unsigned long size, m32map_off, iomap_off, pemap_off;
+	const u64 *prop64;
+	u64 phb_id;
+	void *aux;
+	long rc;
+
+	pr_info(" Initializing IODA OPAL PHB %s\n", np->full_name);
+
+	prop64 = of_get_property(np, "ibm,opal-phbid", NULL);
+	if (!prop64) {
+		pr_err("  Missing \"ibm,opal-phbid\" property !\n");
+		return;
+	}
+	phb_id = be64_to_cpup(prop64);
+	pr_debug("  PHB-ID  : 0x%016llx\n", phb_id);
+
+	phb = alloc_bootmem(sizeof(struct pnv_phb));
+	if (phb) {
+		memset(phb, 0, sizeof(struct pnv_phb));
+		phb->hose = hose = pcibios_alloc_controller(np);
+	}
+	if (!phb || !phb->hose) {
+		pr_err("PCI: Failed to allocate PCI controller for %s\n",
+		       np->full_name);
+		return;
+	}
+
+	spin_lock_init(&phb->lock);
+	/* XXX Use device-tree */
+	hose->first_busno = 0;
+	hose->last_busno = 0xff;
+	hose->private_data = phb;
+	phb->opal_id = phb_id;
+	phb->type = PNV_PHB_IODA1;
+
+	/* Detect specific models for error handling */
+	if (of_device_is_compatible(np, "ibm,p7ioc-pciex"))
+		phb->model = PNV_PHB_MODEL_P7IOC;
+	else
+		phb->model = PNV_PHB_MODEL_UNKNOWN;
+
+	/* We parse "ranges" now since we need to deduce the register base
+	 * from the IO base
+	 */
+	pci_process_bridge_OF_ranges(phb->hose, np, primary);
+	primary = 0;
+
+	/* Magic formula from Milton */
+	phb->regs = of_iomap(np, 0);
+	if (phb->regs == NULL)
+		pr_err("  Failed to map registers !\n");
+
+
+	/* XXX This is hack-a-thon. This needs to be changed so that:
+	 *  - we obtain stuff like PE# etc... from device-tree
+	 *  - we properly re-allocate M32 ourselves
+	 *    (the OFW one isn't very good)
+	 */
+
+	/* Initialize more IODA stuff */
+	phb->ioda.total_pe = 128;
+
+	phb->ioda.m32_size = resource_size(&hose->mem_resources[0]);
+	/* OFW Has already off top 64k of M32 space (MSI space) */
+	phb->ioda.m32_size += 0x10000;
+
+	phb->ioda.m32_segsize = phb->ioda.m32_size / phb->ioda.total_pe;
+	phb->ioda.m32_pci_base = hose->mem_resources[0].start -
+		hose->pci_mem_offset;
+	phb->ioda.io_size = hose->pci_io_size;
+	phb->ioda.io_segsize = phb->ioda.io_size / phb->ioda.total_pe;
+	phb->ioda.io_pci_base = 0; /* XXX calculate this ? */
+
+	/* Allocate aux data & arrays */
+	size = _ALIGN_UP(phb->ioda.total_pe / 8, sizeof(unsigned long));
+	m32map_off = size;
+	size += phb->ioda.total_pe;
+	iomap_off = size;
+	size += phb->ioda.total_pe;
+	pemap_off = size;
+	size += phb->ioda.total_pe * sizeof(struct pnv_ioda_pe);
+	aux = alloc_bootmem(size);
+	memset(aux, 0, size);
+	phb->ioda.pe_alloc = aux;
+	phb->ioda.m32_segmap = aux + m32map_off;
+	phb->ioda.io_segmap = aux + iomap_off;
+	phb->ioda.pe_array = aux + pemap_off;
+	set_bit(0, phb->ioda.pe_alloc);
+
+	INIT_LIST_HEAD(&phb->ioda.pe_list);
+
+	/* Calculate how many 32-bit TCE segments we have */
+	phb->ioda.tce32_count = phb->ioda.m32_pci_base >> 28;
+
+	/* Clear unusable m64 */
+	hose->mem_resources[1].flags = 0;
+	hose->mem_resources[1].start = 0;
+	hose->mem_resources[1].end = 0;
+	hose->mem_resources[2].flags = 0;
+	hose->mem_resources[2].start = 0;
+	hose->mem_resources[2].end = 0;
+
+#if 0
+	rc = opal_pci_set_phb_mem_window(opal->phb_id,
+					 window_type,
+					 window_num,
+					 starting_real_address,
+					 starting_pci_address,
+					 segment_size);
+#endif
+
+	pr_info("  %d PE's M32: 0x%x [segment=0x%x] IO: 0x%x [segment=0x%x]\n",
+		phb->ioda.total_pe,
+		phb->ioda.m32_size, phb->ioda.m32_segsize,
+		phb->ioda.io_size, phb->ioda.io_segsize);
+
+	if (phb->regs)  {
+		pr_devel(" BUID     = 0x%016llx\n", in_be64(phb->regs + 0x100));
+		pr_devel(" PHB2_CR  = 0x%016llx\n", in_be64(phb->regs + 0x160));
+		pr_devel(" IO_BAR   = 0x%016llx\n", in_be64(phb->regs + 0x170));
+		pr_devel(" IO_BAMR  = 0x%016llx\n", in_be64(phb->regs + 0x178));
+		pr_devel(" IO_SAR   = 0x%016llx\n", in_be64(phb->regs + 0x180));
+		pr_devel(" M32_BAR  = 0x%016llx\n", in_be64(phb->regs + 0x190));
+		pr_devel(" M32_BAMR = 0x%016llx\n", in_be64(phb->regs + 0x198));
+		pr_devel(" M32_SAR  = 0x%016llx\n", in_be64(phb->regs + 0x1a0));
+	}
+	phb->hose->ops = &pnv_pci_ops;
+
+	/* Setup RID -> PE mapping function */
+	phb->bdfn_to_pe = pnv_ioda_bdfn_to_pe;
+
+	/* Setup TCEs */
+	phb->dma_dev_setup = pnv_pci_ioda_dma_dev_setup;
+
+	/* Setup MSI support */
+	pnv_pci_init_ioda_msis(phb);
+
+	/* We set both probe_only and PCI_REASSIGN_ALL_RSRC. This is an
+	 * odd combination which essentially means that we skip all resource
+	 * fixups and assignments in the generic code, and do it all
+	 * ourselves here
+	 */
+	pci_probe_only = 1;
+	ppc_md.pcibios_fixup_phb = pnv_pci_ioda_fixup_phb;
+	ppc_md.pcibios_enable_device_hook = pnv_pci_enable_device_hook;
+	pci_add_flags(PCI_REASSIGN_ALL_RSRC);
+
+	/* Reset IODA tables to a clean state */
+	rc = opal_pci_reset(phb_id, OPAL_PCI_IODA_TABLE_RESET, OPAL_ASSERT_RESET);
+	if (rc)
+		pr_warning("  OPAL Error %ld performing IODA table reset !\n", rc);
+	opal_pci_set_pe(phb_id, 0, 0, 7, 1, 1 , OPAL_MAP_PE);
+}
+
+void __init pnv_pci_init_ioda_hub(struct device_node *np)
+{
+	struct device_node *phbn;
+	const u64 *prop64;
+	u64 hub_id;
+
+	pr_info("Probing IODA IO-Hub %s\n", np->full_name);
+
+	prop64 = of_get_property(np, "ibm,opal-hubid", NULL);
+	if (!prop64) {
+		pr_err(" Missing \"ibm,opal-hubid\" property !\n");
+		return;
+	}
+	hub_id = be64_to_cpup(prop64);
+	pr_devel(" HUB-ID : 0x%016llx\n", hub_id);
+
+	/* Count child PHBs */
+	for_each_child_of_node(np, phbn) {
+		/* Look for IODA1 PHBs */
+		if (of_device_is_compatible(phbn, "ibm,ioda-phb"))
+			pnv_pci_init_ioda1_phb(phbn);
+	}
+}
diff --git a/arch/powerpc/platforms/powernv/pci-p5ioc2.c b/arch/powerpc/platforms/powernv/pci-p5ioc2.c
index 4c80f7c77d5..264967770c3 100644
--- a/arch/powerpc/platforms/powernv/pci-p5ioc2.c
+++ b/arch/powerpc/platforms/powernv/pci-p5ioc2.c
@@ -137,6 +137,7 @@ static void __init pnv_pci_init_p5ioc2_phb(struct device_node *np,
 	phb->hose->private_data = phb;
 	phb->opal_id = phb_id;
 	phb->type = PNV_PHB_P5IOC2;
+	phb->model = PNV_PHB_MODEL_P5IOC2;
 
 	phb->regs = of_iomap(np, 0);
 
diff --git a/arch/powerpc/platforms/powernv/pci.c b/arch/powerpc/platforms/powernv/pci.c
index 85bb66d7f93..a70bc1e385e 100644
--- a/arch/powerpc/platforms/powernv/pci.c
+++ b/arch/powerpc/platforms/powernv/pci.c
@@ -144,6 +144,112 @@ static void pnv_teardown_msi_irqs(struct pci_dev *pdev)
 }
 #endif /* CONFIG_PCI_MSI */
 
+static void pnv_pci_dump_p7ioc_diag_data(struct pnv_phb *phb)
+{
+	struct OpalIoP7IOCPhbErrorData *data = &phb->diag.p7ioc;
+	int i;
+
+	pr_info("PHB %d diagnostic data:\n", phb->hose->global_number);
+
+	pr_info("  brdgCtl              = 0x%08x\n", data->brdgCtl);
+
+	pr_info("  portStatusReg        = 0x%08x\n", data->portStatusReg);
+	pr_info("  rootCmplxStatus      = 0x%08x\n", data->rootCmplxStatus);
+	pr_info("  busAgentStatus       = 0x%08x\n", data->busAgentStatus);
+
+	pr_info("  deviceStatus         = 0x%08x\n", data->deviceStatus);
+	pr_info("  slotStatus           = 0x%08x\n", data->slotStatus);
+	pr_info("  linkStatus           = 0x%08x\n", data->linkStatus);
+	pr_info("  devCmdStatus         = 0x%08x\n", data->devCmdStatus);
+	pr_info("  devSecStatus         = 0x%08x\n", data->devSecStatus);
+
+	pr_info("  rootErrorStatus      = 0x%08x\n", data->rootErrorStatus);
+	pr_info("  uncorrErrorStatus    = 0x%08x\n", data->uncorrErrorStatus);
+	pr_info("  corrErrorStatus      = 0x%08x\n", data->corrErrorStatus);
+	pr_info("  tlpHdr1              = 0x%08x\n", data->tlpHdr1);
+	pr_info("  tlpHdr2              = 0x%08x\n", data->tlpHdr2);
+	pr_info("  tlpHdr3              = 0x%08x\n", data->tlpHdr3);
+	pr_info("  tlpHdr4              = 0x%08x\n", data->tlpHdr4);
+	pr_info("  sourceId             = 0x%08x\n", data->sourceId);
+
+	pr_info("  errorClass           = 0x%016llx\n", data->errorClass);
+	pr_info("  correlator           = 0x%016llx\n", data->correlator);
+
+	pr_info("  p7iocPlssr           = 0x%016llx\n", data->p7iocPlssr);
+	pr_info("  p7iocCsr             = 0x%016llx\n", data->p7iocCsr);
+	pr_info("  lemFir               = 0x%016llx\n", data->lemFir);
+	pr_info("  lemErrorMask         = 0x%016llx\n", data->lemErrorMask);
+	pr_info("  lemWOF               = 0x%016llx\n", data->lemWOF);
+	pr_info("  phbErrorStatus       = 0x%016llx\n", data->phbErrorStatus);
+	pr_info("  phbFirstErrorStatus  = 0x%016llx\n", data->phbFirstErrorStatus);
+	pr_info("  phbErrorLog0         = 0x%016llx\n", data->phbErrorLog0);
+	pr_info("  phbErrorLog1         = 0x%016llx\n", data->phbErrorLog1);
+	pr_info("  mmioErrorStatus      = 0x%016llx\n", data->mmioErrorStatus);
+	pr_info("  mmioFirstErrorStatus = 0x%016llx\n", data->mmioFirstErrorStatus);
+	pr_info("  mmioErrorLog0        = 0x%016llx\n", data->mmioErrorLog0);
+	pr_info("  mmioErrorLog1        = 0x%016llx\n", data->mmioErrorLog1);
+	pr_info("  dma0ErrorStatus      = 0x%016llx\n", data->dma0ErrorStatus);
+	pr_info("  dma0FirstErrorStatus = 0x%016llx\n", data->dma0FirstErrorStatus);
+	pr_info("  dma0ErrorLog0        = 0x%016llx\n", data->dma0ErrorLog0);
+	pr_info("  dma0ErrorLog1        = 0x%016llx\n", data->dma0ErrorLog1);
+	pr_info("  dma1ErrorStatus      = 0x%016llx\n", data->dma1ErrorStatus);
+	pr_info("  dma1FirstErrorStatus = 0x%016llx\n", data->dma1FirstErrorStatus);
+	pr_info("  dma1ErrorLog0        = 0x%016llx\n", data->dma1ErrorLog0);
+	pr_info("  dma1ErrorLog1        = 0x%016llx\n", data->dma1ErrorLog1);
+
+	for (i = 0; i < OPAL_P7IOC_NUM_PEST_REGS; i++) {
+		if ((data->pestA[i] >> 63) == 0 &&
+		    (data->pestB[i] >> 63) == 0)
+			continue;
+		pr_info("  PE[%3d] PESTA        = 0x%016llx\n", i, data->pestA[i]);
+		pr_info("          PESTB        = 0x%016llx\n", data->pestB[i]);
+	}
+}
+
+static void pnv_pci_dump_phb_diag_data(struct pnv_phb *phb)
+{
+	switch(phb->model) {
+	case PNV_PHB_MODEL_P7IOC:
+		pnv_pci_dump_p7ioc_diag_data(phb);
+		break;
+	default:
+		pr_warning("PCI %d: Can't decode this PHB diag data\n",
+			   phb->hose->global_number);
+	}
+}
+
+static void pnv_pci_handle_eeh_config(struct pnv_phb *phb, u32 pe_no)
+{
+	unsigned long flags, rc;
+	int has_diag;
+
+	spin_lock_irqsave(&phb->lock, flags);
+
+	rc = opal_pci_get_phb_diag_data(phb->opal_id, phb->diag.blob, PNV_PCI_DIAG_BUF_SIZE);
+	has_diag = (rc == OPAL_SUCCESS);
+
+	rc = opal_pci_eeh_freeze_clear(phb->opal_id, pe_no,
+				       OPAL_EEH_ACTION_CLEAR_FREEZE_ALL);
+	if (rc) {
+		pr_warning("PCI %d: Failed to clear EEH freeze state"
+			   " for PE#%d, err %ld\n",
+			   phb->hose->global_number, pe_no, rc);
+
+		/* For now, let's only display the diag buffer when we fail to clear
+		 * the EEH status. We'll do more sensible things later when we have
+		 * proper EEH support. We need to make sure we don't pollute ourselves
+		 * with the normal errors generated when probing empty slots
+		 */
+		if (has_diag)
+			pnv_pci_dump_phb_diag_data(phb);
+		else
+			pr_warning("PCI %d: No diag data available\n",
+				   phb->hose->global_number);
+	}
+
+	spin_unlock_irqrestore(&phb->lock, flags);
+}
+
 static void pnv_pci_config_check_eeh(struct pnv_phb *phb, struct pci_bus *bus,
 				     u32 bdfn)
 {
@@ -165,15 +271,8 @@ static void pnv_pci_config_check_eeh(struct pnv_phb *phb, struct pci_bus *bus,
 	}
 	cfg_dbg(" -> EEH check, bdfn=%04x PE%d fstate=%x\n",
 		bdfn, pe_no, fstate);
-	if (fstate != 0) {
-		rc = opal_pci_eeh_freeze_clear(phb->opal_id, pe_no,
-					      OPAL_EEH_ACTION_CLEAR_FREEZE_ALL);
-		if (rc) {
-			pr_warning("PCI %d: Failed to clear EEH freeze state"
-				   " for PE#%d, err %lld\n",
-				   phb->hose->global_number, pe_no, rc);
-		}
-	}
+	if (fstate != 0)
+		pnv_pci_handle_eeh_config(phb, pe_no);
 }
 
 static int pnv_pci_read_config(struct pci_bus *bus,
@@ -257,12 +356,54 @@ struct pci_ops pnv_pci_ops = {
 	.write = pnv_pci_write_config,
 };
 
+
+static void pnv_tce_invalidate(struct iommu_table *tbl,
+			       u64 *startp, u64 *endp)
+{
+	u64 __iomem *invalidate = (u64 __iomem *)tbl->it_index;
+	unsigned long start, end, inc;
+
+	start = __pa(startp);
+	end = __pa(endp);
+
+
+	/* BML uses this case for p6/p7/galaxy2: Shift addr and put in node */
+	if (tbl->it_busno) {
+		start <<= 12;
+		end <<= 12;
+		inc = 128 << 12;
+		start |= tbl->it_busno;
+		end |= tbl->it_busno;
+	}
+	/* p7ioc-style invalidation, 2 TCEs per write */
+	else if (tbl->it_type & TCE_PCI_SWINV_PAIR) {
+		start |= (1ull << 63);
+		end |= (1ull << 63);
+		inc = 16;
+	}
+	/* Default (older HW) */
+	else
+		inc = 128;
+
+	end |= inc - 1;		/* round up end to be different than start */
+
+	mb(); /* Ensure above stores are visible */
+	while (start <= end) {
+		__raw_writeq(start, invalidate);
+		start += inc;
+	}
+	/* The iommu layer will do another mb() for us on build() and
+	 * we don't care on free()
+	 */
+}
+
+
 static int pnv_tce_build(struct iommu_table *tbl, long index, long npages,
 			 unsigned long uaddr, enum dma_data_direction direction,
 			 struct dma_attrs *attrs)
 {
 	u64 proto_tce;
-	u64 *tcep;
+	u64 *tcep, *tces;
 	u64 rpn;
 
 	proto_tce = TCE_PCI_READ; // Read allowed
@@ -270,25 +411,33 @@ static int pnv_tce_build(struct iommu_table *tbl, long index, long npages,
 	if (direction != DMA_TO_DEVICE)
 		proto_tce |= TCE_PCI_WRITE;
 
-	tcep = ((u64 *)tbl->it_base) + index;
+	tces = tcep = ((u64 *)tbl->it_base) + index - tbl->it_offset;
+	rpn = __pa(uaddr) >> TCE_SHIFT;
 
-	while (npages--) {
-		/* can't move this out since we might cross LMB boundary */
-		rpn = (virt_to_abs(uaddr)) >> TCE_SHIFT;
-		*tcep = proto_tce | (rpn & TCE_RPN_MASK) << TCE_RPN_SHIFT;
+	while (npages--)
+		*(tcep++) = proto_tce | (rpn++ << TCE_RPN_SHIFT);
+
+	/* Some implementations won't cache invalid TCEs and thus may not
+	 * need that flush. We'll probably turn it_type into a bit mask
+	 * of flags if that becomes the case
+	 */
+	if (tbl->it_type & TCE_PCI_SWINV_CREATE)
+		pnv_tce_invalidate(tbl, tces, tcep - 1);
 
-		uaddr += TCE_PAGE_SIZE;
-		tcep++;
-	}
 	return 0;
 }
 
 static void pnv_tce_free(struct iommu_table *tbl, long index, long npages)
 {
-	u64 *tcep = ((u64 *)tbl->it_base) + index;
+	u64 *tcep, *tces;
+
+	tces = tcep = ((u64 *)tbl->it_base) + index - tbl->it_offset;
 
 	while (npages--)
 		*(tcep++) = 0;
+
+	if (tbl->it_type & TCE_PCI_SWINV_FREE)
+		pnv_tce_invalidate(tbl, tces, tcep - 1);
 }
 
 void pnv_pci_setup_iommu_table(struct iommu_table *tbl,
@@ -308,13 +457,14 @@ static struct iommu_table * __devinit
 pnv_pci_setup_bml_iommu(struct pci_controller *hose)
 {
 	struct iommu_table *tbl;
-	const __be64 *basep;
+	const __be64 *basep, *swinvp;
 	const __be32 *sizep;
 
 	basep = of_get_property(hose->dn, "linux,tce-base", NULL);
 	sizep = of_get_property(hose->dn, "linux,tce-size", NULL);
 	if (basep == NULL || sizep == NULL) {
-		pr_err("PCI: %s has missing tce entries !\n", hose->dn->full_name);
+		pr_err("PCI: %s has missing tce entries !\n",
+		       hose->dn->full_name);
 		return NULL;
 	}
 	tbl = kzalloc_node(sizeof(struct iommu_table), GFP_KERNEL, hose->node);
@@ -323,6 +473,15 @@ pnv_pci_setup_bml_iommu(struct pci_controller *hose)
 	pnv_pci_setup_iommu_table(tbl, __va(be64_to_cpup(basep)),
 				  be32_to_cpup(sizep), 0);
 	iommu_init_table(tbl, hose->node);
+
+	/* Deal with SW invalidated TCEs when needed (BML way) */
+	swinvp = of_get_property(hose->dn, "linux,tce-sw-invalidate-info",
+				 NULL);
+	if (swinvp) {
+		tbl->it_busno = swinvp[1];
+		tbl->it_index = (unsigned long)ioremap(swinvp[0], 8);
+		tbl->it_type = TCE_PCI_SWINV_CREATE | TCE_PCI_SWINV_FREE;
+	}
 	return tbl;
 }
 
@@ -356,6 +515,13 @@ static void __devinit pnv_pci_dma_dev_setup(struct pci_dev *pdev)
 		pnv_pci_dma_fallback_setup(hose, pdev);
 }
 
+/* Fixup wrong class code in p7ioc root complex */
+static void __devinit pnv_p7ioc_rc_quirk(struct pci_dev *dev)
+{
+	dev->class = PCI_CLASS_BRIDGE_PCI << 8;
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_IBM, 0x3b9, pnv_p7ioc_rc_quirk);
+
 static int pnv_pci_probe_mode(struct pci_bus *bus)
 {
 	struct pci_controller *hose = pci_bus_to_host(bus);
@@ -400,12 +566,24 @@ void __init pnv_pci_init(void)
 		init_pci_config_tokens();
 		find_and_init_phbs();
 #endif /* CONFIG_PPC_POWERNV_RTAS */
-	} else {
-		/* OPAL is here, do our normal stuff */
+	}
+	/* OPAL is here, do our normal stuff */
+	else {
+		int found_ioda = 0;
+
+		/* Look for IODA IO-Hubs. We don't support mixing IODA
+		 * and p5ioc2 due to the need to change some global
+		 * probing flags
+		 */
+		for_each_compatible_node(np, NULL, "ibm,ioda-hub") {
+			pnv_pci_init_ioda_hub(np);
+			found_ioda = 1;
+		}
 
 		/* Look for p5ioc2 IO-Hubs */
-		for_each_compatible_node(np, NULL, "ibm,p5ioc2")
-			pnv_pci_init_p5ioc2_hub(np);
+		if (!found_ioda)
+			for_each_compatible_node(np, NULL, "ibm,p5ioc2")
+				pnv_pci_init_p5ioc2_hub(np);
 	}
 
 	/* Setup the linkage between OF nodes and PHBs */
diff --git a/arch/powerpc/platforms/powernv/pci.h b/arch/powerpc/platforms/powernv/pci.h
index d4dbc495093..8bc47963464 100644
--- a/arch/powerpc/platforms/powernv/pci.h
+++ b/arch/powerpc/platforms/powernv/pci.h
@@ -9,9 +9,63 @@ enum pnv_phb_type {
 	PNV_PHB_IODA2,
 };
 
+/* Precise PHB model for error management */
+enum pnv_phb_model {
+	PNV_PHB_MODEL_UNKNOWN,
+	PNV_PHB_MODEL_P5IOC2,
+	PNV_PHB_MODEL_P7IOC,
+};
+
+#define PNV_PCI_DIAG_BUF_SIZE	4096
+
+/* Data associated with a PE, including IOMMU tracking etc.. */
+struct pnv_ioda_pe {
+	/* A PE can be associated with a single device or an
+	 * entire bus (& children). In the former case, pdev
+	 * is populated, in the later case, pbus is.
+	 */
+	struct pci_dev		*pdev;
+	struct pci_bus		*pbus;
+
+	/* Effective RID (device RID for a device PE and base bus
+	 * RID with devfn 0 for a bus PE)
+	 */
+	unsigned int		rid;
+
+	/* PE number */
+	unsigned int		pe_number;
+
+	/* "Weight" assigned to the PE for the sake of DMA resource
+	 * allocations
+	 */
+	unsigned int		dma_weight;
+
+	/* This is a PCI-E -> PCI-X bridge, this points to the
+	 * corresponding bus PE
+	 */
+	struct pnv_ioda_pe	*bus_pe;
+
+	/* "Base" iommu table, ie, 4K TCEs, 32-bit DMA */
+	int			tce32_seg;
+	int			tce32_segcount;
+	struct iommu_table	tce32_table;
+
+	/* XXX TODO: Add support for additional 64-bit iommus */
+
+	/* MSIs. MVE index is identical for for 32 and 64 bit MSI
+	 * and -1 if not supported. (It's actually identical to the
+	 * PE number)
+	 */
+	int			mve_number;
+
+	/* Link in list of PE#s */
+	struct list_head	link;
+};
+
 struct pnv_phb {
 	struct pci_controller	*hose;
 	enum pnv_phb_type	type;
+	enum pnv_phb_model	model;
 	u64			opal_id;
 	void __iomem		*regs;
 	spinlock_t		lock;
@@ -34,7 +88,52 @@ struct pnv_phb {
 		struct {
 			struct iommu_table iommu_table;
 		} p5ioc2;
+
+		struct {
+			/* Global bridge info */
+			unsigned int		total_pe;
+			unsigned int		m32_size;
+			unsigned int		m32_segsize;
+			unsigned int		m32_pci_base;
+			unsigned int		io_size;
+			unsigned int		io_segsize;
+			unsigned int		io_pci_base;
+
+			/* PE allocation bitmap */
+			unsigned long		*pe_alloc;
+
+			/* M32 & IO segment maps */
+			unsigned int		*m32_segmap;
+			unsigned int		*io_segmap;
+			struct pnv_ioda_pe	*pe_array;
+
+			/* Reverse map of PEs, will have to extend if
+			 * we are to support more than 256 PEs, indexed
+			 * bus { bus, devfn }
+			 */
+			unsigned char		pe_rmap[0x10000];
+
+			/* 32-bit TCE tables allocation */
+			unsigned long		tce32_count;
+
+			/* Total "weight" for the sake of DMA resources
+			 * allocation
+			 */
+			unsigned int		dma_weight;
+			unsigned int		dma_pe_count;
+
+			/* Sorted list of used PE's, sorted at
+			 * boot for resource allocation purposes
+			 */
+			struct list_head	pe_list;
+		} ioda;
 	};
+
+	/* PHB status structure */
+	union {
+		unsigned char			blob[PNV_PCI_DIAG_BUF_SIZE];
+		struct OpalIoP7IOCPhbErrorData	p7ioc;
+	} diag;
 };
 
 extern struct pci_ops pnv_pci_ops;
@@ -43,6 +142,7 @@ extern void pnv_pci_setup_iommu_table(struct iommu_table *tbl,
 				      void *tce_mem, u64 tce_size,
 				      u64 dma_offset);
 extern void pnv_pci_init_p5ioc2_hub(struct device_node *np);
+extern void pnv_pci_init_ioda_hub(struct device_node *np);
 
 
 #endif /* __POWERNV_PCI_H */
diff --git a/arch/powerpc/platforms/powernv/smp.c b/arch/powerpc/platforms/powernv/smp.c
index e8773668524..17210c526c5 100644
--- a/arch/powerpc/platforms/powernv/smp.c
+++ b/arch/powerpc/platforms/powernv/smp.c
@@ -75,7 +75,7 @@ int __devinit pnv_smp_kick_cpu(int nr)
 	/* On OPAL v2 the CPU are still spinning inside OPAL itself,
 	 * get them back now
 	 */
-	if (firmware_has_feature(FW_FEATURE_OPALv2)) {
+	if (!paca[nr].cpu_start && firmware_has_feature(FW_FEATURE_OPALv2)) {
 		pr_devel("OPAL: Starting CPU %d (HW 0x%x)...\n", nr, pcpu);
 		rc = opal_start_cpu(pcpu, start_here);
 		if (rc != OPAL_SUCCESS)
diff --git a/arch/powerpc/platforms/ps3/interrupt.c b/arch/powerpc/platforms/ps3/interrupt.c
index 1d6f4f478fe..617efa12a3a 100644
--- a/arch/powerpc/platforms/ps3/interrupt.c
+++ b/arch/powerpc/platforms/ps3/interrupt.c
@@ -31,18 +31,18 @@
 
 #if defined(DEBUG)
 #define DBG udbg_printf
+#define FAIL udbg_printf
 #else
-#define DBG pr_debug
+#define DBG pr_devel
+#define FAIL pr_debug
 #endif
 
 /**
  * struct ps3_bmp - a per cpu irq status and mask bitmap structure
  * @status: 256 bit status bitmap indexed by plug
- * @unused_1:
+ * @unused_1: Alignment
  * @mask: 256 bit mask bitmap indexed by plug
- * @unused_2:
- * @lock:
- * @ipi_debug_brk_mask:
+ * @unused_2: Alignment
  *
  * The HV maintains per SMT thread mappings of HV outlet to HV plug on
  * behalf of the guest.  These mappings are implemented as 256 bit guest
@@ -73,21 +73,24 @@ struct ps3_bmp {
 		unsigned long mask;
 		u64 unused_2[3];
 	};
-	u64 ipi_debug_brk_mask;
-	spinlock_t lock;
 };
 
 /**
  * struct ps3_private - a per cpu data structure
  * @bmp: ps3_bmp structure
+ * @bmp_lock: Syncronize access to bmp.
+ * @ipi_debug_brk_mask: Mask for debug break IPIs
  * @ppe_id: HV logical_ppe_id
  * @thread_id: HV thread_id
+ * @ipi_mask: Mask of IPI virqs
  */
 
 struct ps3_private {
 	struct ps3_bmp bmp __attribute__ ((aligned (PS3_BMP_MINALIGN)));
+	spinlock_t bmp_lock;
 	u64 ppe_id;
 	u64 thread_id;
+	unsigned long ipi_debug_brk_mask;
 	unsigned long ipi_mask;
 };
 
@@ -105,7 +108,7 @@ static void ps3_chip_mask(struct irq_data *d)
 	struct ps3_private *pd = irq_data_get_irq_chip_data(d);
 	unsigned long flags;
 
-	pr_debug("%s:%d: thread_id %llu, virq %d\n", __func__, __LINE__,
+	DBG("%s:%d: thread_id %llu, virq %d\n", __func__, __LINE__,
 		pd->thread_id, d->irq);
 
 	local_irq_save(flags);
@@ -126,7 +129,7 @@ static void ps3_chip_unmask(struct irq_data *d)
 	struct ps3_private *pd = irq_data_get_irq_chip_data(d);
 	unsigned long flags;
 
-	pr_debug("%s:%d: thread_id %llu, virq %d\n", __func__, __LINE__,
+	DBG("%s:%d: thread_id %llu, virq %d\n", __func__, __LINE__,
 		pd->thread_id, d->irq);
 
 	local_irq_save(flags);
@@ -190,19 +193,19 @@ static int ps3_virq_setup(enum ps3_cpu_binding cpu, unsigned long outlet,
 	*virq = irq_create_mapping(NULL, outlet);
 
 	if (*virq == NO_IRQ) {
-		pr_debug("%s:%d: irq_create_mapping failed: outlet %lu\n",
+		FAIL("%s:%d: irq_create_mapping failed: outlet %lu\n",
 			__func__, __LINE__, outlet);
 		result = -ENOMEM;
 		goto fail_create;
 	}
 
-	pr_debug("%s:%d: outlet %lu => cpu %u, virq %u\n", __func__, __LINE__,
+	DBG("%s:%d: outlet %lu => cpu %u, virq %u\n", __func__, __LINE__,
 		outlet, cpu, *virq);
 
 	result = irq_set_chip_data(*virq, pd);
 
 	if (result) {
-		pr_debug("%s:%d: irq_set_chip_data failed\n",
+		FAIL("%s:%d: irq_set_chip_data failed\n",
 			__func__, __LINE__);
 		goto fail_set;
 	}
@@ -228,13 +231,13 @@ static int ps3_virq_destroy(unsigned int virq)
 {
 	const struct ps3_private *pd = irq_get_chip_data(virq);
 
-	pr_debug("%s:%d: ppe_id %llu, thread_id %llu, virq %u\n", __func__,
+	DBG("%s:%d: ppe_id %llu, thread_id %llu, virq %u\n", __func__,
 		__LINE__, pd->ppe_id, pd->thread_id, virq);
 
 	irq_set_chip_data(virq, NULL);
 	irq_dispose_mapping(virq);
 
-	pr_debug("%s:%d <-\n", __func__, __LINE__);
+	DBG("%s:%d <-\n", __func__, __LINE__);
 	return 0;
 }
 
@@ -257,7 +260,7 @@ int ps3_irq_plug_setup(enum ps3_cpu_binding cpu, unsigned long outlet,
 	result = ps3_virq_setup(cpu, outlet, virq);
 
 	if (result) {
-		pr_debug("%s:%d: ps3_virq_setup failed\n", __func__, __LINE__);
+		FAIL("%s:%d: ps3_virq_setup failed\n", __func__, __LINE__);
 		goto fail_setup;
 	}
 
@@ -269,7 +272,7 @@ int ps3_irq_plug_setup(enum ps3_cpu_binding cpu, unsigned long outlet,
 		outlet, 0);
 
 	if (result) {
-		pr_info("%s:%d: lv1_connect_irq_plug_ext failed: %s\n",
+		FAIL("%s:%d: lv1_connect_irq_plug_ext failed: %s\n",
 		__func__, __LINE__, ps3_result(result));
 		result = -EPERM;
 		goto fail_connect;
@@ -298,7 +301,7 @@ int ps3_irq_plug_destroy(unsigned int virq)
 	int result;
 	const struct ps3_private *pd = irq_get_chip_data(virq);
 
-	pr_debug("%s:%d: ppe_id %llu, thread_id %llu, virq %u\n", __func__,
+	DBG("%s:%d: ppe_id %llu, thread_id %llu, virq %u\n", __func__,
 		__LINE__, pd->ppe_id, pd->thread_id, virq);
 
 	ps3_chip_mask(irq_get_irq_data(virq));
@@ -306,7 +309,7 @@ int ps3_irq_plug_destroy(unsigned int virq)
 	result = lv1_disconnect_irq_plug_ext(pd->ppe_id, pd->thread_id, virq);
 
 	if (result)
-		pr_info("%s:%d: lv1_disconnect_irq_plug_ext failed: %s\n",
+		FAIL("%s:%d: lv1_disconnect_irq_plug_ext failed: %s\n",
 		__func__, __LINE__, ps3_result(result));
 
 	ps3_virq_destroy(virq);
@@ -334,7 +337,7 @@ int ps3_event_receive_port_setup(enum ps3_cpu_binding cpu, unsigned int *virq)
 	result = lv1_construct_event_receive_port(&outlet);
 
 	if (result) {
-		pr_debug("%s:%d: lv1_construct_event_receive_port failed: %s\n",
+		FAIL("%s:%d: lv1_construct_event_receive_port failed: %s\n",
 			__func__, __LINE__, ps3_result(result));
 		*virq = NO_IRQ;
 		return result;
@@ -360,14 +363,14 @@ int ps3_event_receive_port_destroy(unsigned int virq)
 {
 	int result;
 
-	pr_debug(" -> %s:%d virq %u\n", __func__, __LINE__, virq);
+	DBG(" -> %s:%d virq %u\n", __func__, __LINE__, virq);
 
 	ps3_chip_mask(irq_get_irq_data(virq));
 
 	result = lv1_destruct_event_receive_port(virq_to_hw(virq));
 
 	if (result)
-		pr_debug("%s:%d: lv1_destruct_event_receive_port failed: %s\n",
+		FAIL("%s:%d: lv1_destruct_event_receive_port failed: %s\n",
 			__func__, __LINE__, ps3_result(result));
 
 	/*
@@ -375,7 +378,7 @@ int ps3_event_receive_port_destroy(unsigned int virq)
 	 * calls from interrupt context (smp_call_function) when kexecing.
 	 */
 
-	pr_debug(" <- %s:%d\n", __func__, __LINE__);
+	DBG(" <- %s:%d\n", __func__, __LINE__);
 	return result;
 }
 
@@ -411,7 +414,7 @@ int ps3_sb_event_receive_port_setup(struct ps3_system_bus_device *dev,
 		dev->dev_id, virq_to_hw(*virq), dev->interrupt_id);
 
 	if (result) {
-		pr_debug("%s:%d: lv1_connect_interrupt_event_receive_port"
+		FAIL("%s:%d: lv1_connect_interrupt_event_receive_port"
 			" failed: %s\n", __func__, __LINE__,
 			ps3_result(result));
 		ps3_event_receive_port_destroy(*virq);
@@ -419,7 +422,7 @@ int ps3_sb_event_receive_port_setup(struct ps3_system_bus_device *dev,
 		return result;
 	}
 
-	pr_debug("%s:%d: interrupt_id %u, virq %u\n", __func__, __LINE__,
+	DBG("%s:%d: interrupt_id %u, virq %u\n", __func__, __LINE__,
 		dev->interrupt_id, *virq);
 
 	return 0;
@@ -433,14 +436,14 @@ int ps3_sb_event_receive_port_destroy(struct ps3_system_bus_device *dev,
 
 	int result;
 
-	pr_debug(" -> %s:%d: interrupt_id %u, virq %u\n", __func__, __LINE__,
+	DBG(" -> %s:%d: interrupt_id %u, virq %u\n", __func__, __LINE__,
 		dev->interrupt_id, virq);
 
 	result = lv1_disconnect_interrupt_event_receive_port(dev->bus_id,
 		dev->dev_id, virq_to_hw(virq), dev->interrupt_id);
 
 	if (result)
-		pr_debug("%s:%d: lv1_disconnect_interrupt_event_receive_port"
+		FAIL("%s:%d: lv1_disconnect_interrupt_event_receive_port"
 			" failed: %s\n", __func__, __LINE__,
 			ps3_result(result));
 
@@ -455,7 +458,7 @@ int ps3_sb_event_receive_port_destroy(struct ps3_system_bus_device *dev,
 	result = ps3_virq_destroy(virq);
 	BUG_ON(result);
 
-	pr_debug(" <- %s:%d\n", __func__, __LINE__);
+	DBG(" <- %s:%d\n", __func__, __LINE__);
 	return result;
 }
 EXPORT_SYMBOL(ps3_sb_event_receive_port_destroy);
@@ -480,7 +483,7 @@ int ps3_io_irq_setup(enum ps3_cpu_binding cpu, unsigned int interrupt_id,
 	result = lv1_construct_io_irq_outlet(interrupt_id, &outlet);
 
 	if (result) {
-		pr_debug("%s:%d: lv1_construct_io_irq_outlet failed: %s\n",
+		FAIL("%s:%d: lv1_construct_io_irq_outlet failed: %s\n",
 			__func__, __LINE__, ps3_result(result));
 		return result;
 	}
@@ -510,7 +513,7 @@ int ps3_io_irq_destroy(unsigned int virq)
 	result = lv1_destruct_io_irq_outlet(outlet);
 
 	if (result)
-		pr_debug("%s:%d: lv1_destruct_io_irq_outlet failed: %s\n",
+		FAIL("%s:%d: lv1_destruct_io_irq_outlet failed: %s\n",
 			__func__, __LINE__, ps3_result(result));
 
 	return result;
@@ -542,7 +545,7 @@ int ps3_vuart_irq_setup(enum ps3_cpu_binding cpu, void* virt_addr_bmp,
 	result = lv1_configure_virtual_uart_irq(lpar_addr, &outlet);
 
 	if (result) {
-		pr_debug("%s:%d: lv1_configure_virtual_uart_irq failed: %s\n",
+		FAIL("%s:%d: lv1_configure_virtual_uart_irq failed: %s\n",
 			__func__, __LINE__, ps3_result(result));
 		return result;
 	}
@@ -562,7 +565,7 @@ int ps3_vuart_irq_destroy(unsigned int virq)
 	result = lv1_deconfigure_virtual_uart_irq();
 
 	if (result) {
-		pr_debug("%s:%d: lv1_configure_virtual_uart_irq failed: %s\n",
+		FAIL("%s:%d: lv1_configure_virtual_uart_irq failed: %s\n",
 			__func__, __LINE__, ps3_result(result));
 		return result;
 	}
@@ -595,7 +598,7 @@ int ps3_spe_irq_setup(enum ps3_cpu_binding cpu, unsigned long spe_id,
 	result = lv1_get_spe_irq_outlet(spe_id, class, &outlet);
 
 	if (result) {
-		pr_debug("%s:%d: lv1_get_spe_irq_outlet failed: %s\n",
+		FAIL("%s:%d: lv1_get_spe_irq_outlet failed: %s\n",
 			__func__, __LINE__, ps3_result(result));
 		return result;
 	}
@@ -626,7 +629,7 @@ int ps3_spe_irq_destroy(unsigned int virq)
 static void _dump_64_bmp(const char *header, const u64 *p, unsigned cpu,
 	const char* func, int line)
 {
-	pr_debug("%s:%d: %s %u {%04lx_%04lx_%04lx_%04lx}\n",
+	pr_debug("%s:%d: %s %u {%04llx_%04llx_%04llx_%04llx}\n",
 		func, line, header, cpu,
 		*p >> 48, (*p >> 32) & 0xffff, (*p >> 16) & 0xffff,
 		*p & 0xffff);
@@ -635,7 +638,7 @@ static void _dump_64_bmp(const char *header, const u64 *p, unsigned cpu,
 static void __maybe_unused _dump_256_bmp(const char *header,
 	const u64 *p, unsigned cpu, const char* func, int line)
 {
-	pr_debug("%s:%d: %s %u {%016lx:%016lx:%016lx:%016lx}\n",
+	pr_debug("%s:%d: %s %u {%016llx:%016llx:%016llx:%016llx}\n",
 		func, line, header, cpu, p[0], p[1], p[2], p[3]);
 }
 
@@ -644,10 +647,10 @@ static void _dump_bmp(struct ps3_private* pd, const char* func, int line)
 {
 	unsigned long flags;
 
-	spin_lock_irqsave(&pd->bmp.lock, flags);
+	spin_lock_irqsave(&pd->bmp_lock, flags);
 	_dump_64_bmp("stat", &pd->bmp.status, pd->thread_id, func, line);
-	_dump_64_bmp("mask", &pd->bmp.mask, pd->thread_id, func, line);
-	spin_unlock_irqrestore(&pd->bmp.lock, flags);
+	_dump_64_bmp("mask", (u64*)&pd->bmp.mask, pd->thread_id, func, line);
+	spin_unlock_irqrestore(&pd->bmp_lock, flags);
 }
 
 #define dump_mask(_x) _dump_mask(_x, __func__, __LINE__)
@@ -656,9 +659,9 @@ static void __maybe_unused _dump_mask(struct ps3_private *pd,
 {
 	unsigned long flags;
 
-	spin_lock_irqsave(&pd->bmp.lock, flags);
-	_dump_64_bmp("mask", &pd->bmp.mask, pd->thread_id, func, line);
-	spin_unlock_irqrestore(&pd->bmp.lock, flags);
+	spin_lock_irqsave(&pd->bmp_lock, flags);
+	_dump_64_bmp("mask", (u64*)&pd->bmp.mask, pd->thread_id, func, line);
+	spin_unlock_irqrestore(&pd->bmp_lock, flags);
 }
 #else
 static void dump_bmp(struct ps3_private* pd) {};
@@ -667,7 +670,7 @@ static void dump_bmp(struct ps3_private* pd) {};
 static int ps3_host_map(struct irq_host *h, unsigned int virq,
 	irq_hw_number_t hwirq)
 {
-	pr_debug("%s:%d: hwirq %lu, virq %u\n", __func__, __LINE__, hwirq,
+	DBG("%s:%d: hwirq %lu, virq %u\n", __func__, __LINE__, hwirq,
 		virq);
 
 	irq_set_chip_and_handler(virq, &ps3_irq_chip, handle_fasteoi_irq);
@@ -690,10 +693,10 @@ void __init ps3_register_ipi_debug_brk(unsigned int cpu, unsigned int virq)
 {
 	struct ps3_private *pd = &per_cpu(ps3_private, cpu);
 
-	pd->bmp.ipi_debug_brk_mask = 0x8000000000000000UL >> virq;
+	set_bit(63 - virq, &pd->ipi_debug_brk_mask);
 
-	pr_debug("%s:%d: cpu %u, virq %u, mask %llxh\n", __func__, __LINE__,
-		cpu, virq, pd->bmp.ipi_debug_brk_mask);
+	DBG("%s:%d: cpu %u, virq %u, mask %lxh\n", __func__, __LINE__,
+		cpu, virq, pd->ipi_debug_brk_mask);
 }
 
 void __init ps3_register_ipi_irq(unsigned int cpu, unsigned int virq)
@@ -714,14 +717,14 @@ static unsigned int ps3_get_irq(void)
 
 	/* check for ipi break first to stop this cpu ASAP */
 
-	if (x & pd->bmp.ipi_debug_brk_mask)
-		x &= pd->bmp.ipi_debug_brk_mask;
+	if (x & pd->ipi_debug_brk_mask)
+		x &= pd->ipi_debug_brk_mask;
 
 	asm volatile("cntlzd %0,%1" : "=r" (plug) : "r" (x));
 	plug &= 0x3f;
 
 	if (unlikely(plug == NO_IRQ)) {
-		pr_debug("%s:%d: no plug found: thread_id %llu\n", __func__,
+		DBG("%s:%d: no plug found: thread_id %llu\n", __func__,
 			__LINE__, pd->thread_id);
 		dump_bmp(&per_cpu(ps3_private, 0));
 		dump_bmp(&per_cpu(ps3_private, 1));
@@ -760,9 +763,9 @@ void __init ps3_init_IRQ(void)
 
 		lv1_get_logical_ppe_id(&pd->ppe_id);
 		pd->thread_id = get_hard_smp_processor_id(cpu);
-		spin_lock_init(&pd->bmp.lock);
+		spin_lock_init(&pd->bmp_lock);
 
-		pr_debug("%s:%d: ppe_id %llu, thread_id %llu, bmp %lxh\n",
+		DBG("%s:%d: ppe_id %llu, thread_id %llu, bmp %lxh\n",
 			__func__, __LINE__, pd->ppe_id, pd->thread_id,
 			ps3_mm_phys_to_lpar(__pa(&pd->bmp)));
 
@@ -770,7 +773,7 @@ void __init ps3_init_IRQ(void)
 			pd->thread_id, ps3_mm_phys_to_lpar(__pa(&pd->bmp)));
 
 		if (result)
-			pr_debug("%s:%d: lv1_configure_irq_state_bitmap failed:"
+			FAIL("%s:%d: lv1_configure_irq_state_bitmap failed:"
 				" %s\n", __func__, __LINE__,
 				ps3_result(result));
 	}
diff --git a/arch/powerpc/platforms/ps3/repository.c b/arch/powerpc/platforms/ps3/repository.c
index ca40f6afd35..7bdfea336f5 100644
--- a/arch/powerpc/platforms/ps3/repository.c
+++ b/arch/powerpc/platforms/ps3/repository.c
@@ -44,7 +44,7 @@ static void _dump_field(const char *hdr, u64 n, const char *func, int line)
 		s[i] = (in[i] <= 126 && in[i] >= 32) ? in[i] : '.';
 	s[i] = 0;
 
-	pr_debug("%s:%d: %s%016llx : %s\n", func, line, hdr, n, s);
+	pr_devel("%s:%d: %s%016llx : %s\n", func, line, hdr, n, s);
 #endif
 }
 
@@ -53,7 +53,7 @@ static void _dump_field(const char *hdr, u64 n, const char *func, int line)
 static void _dump_node_name(unsigned int lpar_id, u64 n1, u64 n2, u64 n3,
 	u64 n4, const char *func, int line)
 {
-	pr_debug("%s:%d: lpar: %u\n", func, line, lpar_id);
+	pr_devel("%s:%d: lpar: %u\n", func, line, lpar_id);
 	_dump_field("n1: ", n1, func, line);
 	_dump_field("n2: ", n2, func, line);
 	_dump_field("n3: ", n3, func, line);
@@ -65,13 +65,13 @@ static void _dump_node_name(unsigned int lpar_id, u64 n1, u64 n2, u64 n3,
 static void _dump_node(unsigned int lpar_id, u64 n1, u64 n2, u64 n3, u64 n4,
 	u64 v1, u64 v2, const char *func, int line)
 {
-	pr_debug("%s:%d: lpar: %u\n", func, line, lpar_id);
+	pr_devel("%s:%d: lpar: %u\n", func, line, lpar_id);
 	_dump_field("n1: ", n1, func, line);
 	_dump_field("n2: ", n2, func, line);
 	_dump_field("n3: ", n3, func, line);
 	_dump_field("n4: ", n4, func, line);
-	pr_debug("%s:%d: v1: %016llx\n", func, line, v1);
-	pr_debug("%s:%d: v2: %016llx\n", func, line, v2);
+	pr_devel("%s:%d: v1: %016llx\n", func, line, v1);
+	pr_devel("%s:%d: v2: %016llx\n", func, line, v2);
 }
 
 /**
@@ -131,11 +131,11 @@ static int read_node(unsigned int lpar_id, u64 n1, u64 n2, u64 n3, u64 n4,
 		lpar_id = id;
 	}
 
-	result = lv1_get_repository_node_value(lpar_id, n1, n2, n3, n4, &v1,
+	result = lv1_read_repository_node(lpar_id, n1, n2, n3, n4, &v1,
 		&v2);
 
 	if (result) {
-		pr_debug("%s:%d: lv1_get_repository_node_value failed: %s\n",
+		pr_warn("%s:%d: lv1_read_repository_node failed: %s\n",
 			__func__, __LINE__, ps3_result(result));
 		dump_node_name(lpar_id, n1, n2, n3, n4);
 		return -ENOENT;
@@ -149,10 +149,10 @@ static int read_node(unsigned int lpar_id, u64 n1, u64 n2, u64 n3, u64 n4,
 		*_v2 = v2;
 
 	if (v1 && !_v1)
-		pr_debug("%s:%d: warning: discarding non-zero v1: %016llx\n",
+		pr_devel("%s:%d: warning: discarding non-zero v1: %016llx\n",
 			__func__, __LINE__, v1);
 	if (v2 && !_v2)
-		pr_debug("%s:%d: warning: discarding non-zero v2: %016llx\n",
+		pr_devel("%s:%d: warning: discarding non-zero v2: %016llx\n",
 			__func__, __LINE__, v2);
 
 	return 0;
@@ -323,16 +323,16 @@ int ps3_repository_find_device(struct ps3_repository_device *repo)
 	result = ps3_repository_read_bus_num_dev(tmp.bus_index, &num_dev);
 
 	if (result) {
-		pr_debug("%s:%d read_bus_num_dev failed\n", __func__, __LINE__);
+		pr_devel("%s:%d read_bus_num_dev failed\n", __func__, __LINE__);
 		return result;
 	}
 
-	pr_debug("%s:%d: bus_type %u, bus_index %u, bus_id %llu, num_dev %u\n",
+	pr_devel("%s:%d: bus_type %u, bus_index %u, bus_id %llu, num_dev %u\n",
 		__func__, __LINE__, tmp.bus_type, tmp.bus_index, tmp.bus_id,
 		num_dev);
 
 	if (tmp.dev_index >= num_dev) {
-		pr_debug("%s:%d: no device found\n", __func__, __LINE__);
+		pr_devel("%s:%d: no device found\n", __func__, __LINE__);
 		return -ENODEV;
 	}
 
@@ -340,7 +340,7 @@ int ps3_repository_find_device(struct ps3_repository_device *repo)
 		&tmp.dev_type);
 
 	if (result) {
-		pr_debug("%s:%d read_dev_type failed\n", __func__, __LINE__);
+		pr_devel("%s:%d read_dev_type failed\n", __func__, __LINE__);
 		return result;
 	}
 
@@ -348,12 +348,12 @@ int ps3_repository_find_device(struct ps3_repository_device *repo)
 		&tmp.dev_id);
 
 	if (result) {
-		pr_debug("%s:%d ps3_repository_read_dev_id failed\n", __func__,
+		pr_devel("%s:%d ps3_repository_read_dev_id failed\n", __func__,
 		__LINE__);
 		return result;
 	}
 
-	pr_debug("%s:%d: found: dev_type %u, dev_index %u, dev_id %llu\n",
+	pr_devel("%s:%d: found: dev_type %u, dev_index %u, dev_id %llu\n",
 		__func__, __LINE__, tmp.dev_type, tmp.dev_index, tmp.dev_id);
 
 	*repo = tmp;
@@ -367,14 +367,14 @@ int ps3_repository_find_device_by_id(struct ps3_repository_device *repo,
 	struct ps3_repository_device tmp;
 	unsigned int num_dev;
 
-	pr_debug(" -> %s:%u: find device by id %llu:%llu\n", __func__, __LINE__,
+	pr_devel(" -> %s:%u: find device by id %llu:%llu\n", __func__, __LINE__,
 		 bus_id, dev_id);
 
 	for (tmp.bus_index = 0; tmp.bus_index < 10; tmp.bus_index++) {
 		result = ps3_repository_read_bus_id(tmp.bus_index,
 						    &tmp.bus_id);
 		if (result) {
-			pr_debug("%s:%u read_bus_id(%u) failed\n", __func__,
+			pr_devel("%s:%u read_bus_id(%u) failed\n", __func__,
 				 __LINE__, tmp.bus_index);
 			return result;
 		}
@@ -382,23 +382,23 @@ int ps3_repository_find_device_by_id(struct ps3_repository_device *repo,
 		if (tmp.bus_id == bus_id)
 			goto found_bus;
 
-		pr_debug("%s:%u: skip, bus_id %llu\n", __func__, __LINE__,
+		pr_devel("%s:%u: skip, bus_id %llu\n", __func__, __LINE__,
 			 tmp.bus_id);
 	}
-	pr_debug(" <- %s:%u: bus not found\n", __func__, __LINE__);
+	pr_devel(" <- %s:%u: bus not found\n", __func__, __LINE__);
 	return result;
 
 found_bus:
 	result = ps3_repository_read_bus_type(tmp.bus_index, &tmp.bus_type);
 	if (result) {
-		pr_debug("%s:%u read_bus_type(%u) failed\n", __func__,
+		pr_devel("%s:%u read_bus_type(%u) failed\n", __func__,
 			 __LINE__, tmp.bus_index);
 		return result;
 	}
 
 	result = ps3_repository_read_bus_num_dev(tmp.bus_index, &num_dev);
 	if (result) {
-		pr_debug("%s:%u read_bus_num_dev failed\n", __func__,
+		pr_devel("%s:%u read_bus_num_dev failed\n", __func__,
 			 __LINE__);
 		return result;
 	}
@@ -408,7 +408,7 @@ found_bus:
 						    tmp.dev_index,
 						    &tmp.dev_id);
 		if (result) {
-			pr_debug("%s:%u read_dev_id(%u:%u) failed\n", __func__,
+			pr_devel("%s:%u read_dev_id(%u:%u) failed\n", __func__,
 				 __LINE__, tmp.bus_index, tmp.dev_index);
 			return result;
 		}
@@ -416,21 +416,21 @@ found_bus:
 		if (tmp.dev_id == dev_id)
 			goto found_dev;
 
-		pr_debug("%s:%u: skip, dev_id %llu\n", __func__, __LINE__,
+		pr_devel("%s:%u: skip, dev_id %llu\n", __func__, __LINE__,
 			 tmp.dev_id);
 	}
-	pr_debug(" <- %s:%u: dev not found\n", __func__, __LINE__);
+	pr_devel(" <- %s:%u: dev not found\n", __func__, __LINE__);
 	return result;
 
 found_dev:
 	result = ps3_repository_read_dev_type(tmp.bus_index, tmp.dev_index,
 					      &tmp.dev_type);
 	if (result) {
-		pr_debug("%s:%u read_dev_type failed\n", __func__, __LINE__);
+		pr_devel("%s:%u read_dev_type failed\n", __func__, __LINE__);
 		return result;
 	}
 
-	pr_debug(" <- %s:%u: found: type (%u:%u) index (%u:%u) id (%llu:%llu)\n",
+	pr_devel(" <- %s:%u: found: type (%u:%u) index (%u:%u) id (%llu:%llu)\n",
 		 __func__, __LINE__, tmp.bus_type, tmp.dev_type, tmp.bus_index,
 		 tmp.dev_index, tmp.bus_id, tmp.dev_id);
 	*repo = tmp;
@@ -443,18 +443,18 @@ int __devinit ps3_repository_find_devices(enum ps3_bus_type bus_type,
 	int result = 0;
 	struct ps3_repository_device repo;
 
-	pr_debug(" -> %s:%d: find bus_type %u\n", __func__, __LINE__, bus_type);
+	pr_devel(" -> %s:%d: find bus_type %u\n", __func__, __LINE__, bus_type);
 
 	repo.bus_type = bus_type;
 	result = ps3_repository_find_bus(repo.bus_type, 0, &repo.bus_index);
 	if (result) {
-		pr_debug(" <- %s:%u: bus not found\n", __func__, __LINE__);
+		pr_devel(" <- %s:%u: bus not found\n", __func__, __LINE__);
 		return result;
 	}
 
 	result = ps3_repository_read_bus_id(repo.bus_index, &repo.bus_id);
 	if (result) {
-		pr_debug("%s:%d read_bus_id(%u) failed\n", __func__, __LINE__,
+		pr_devel("%s:%d read_bus_id(%u) failed\n", __func__, __LINE__,
 			 repo.bus_index);
 		return result;
 	}
@@ -469,13 +469,13 @@ int __devinit ps3_repository_find_devices(enum ps3_bus_type bus_type,
 
 		result = callback(&repo);
 		if (result) {
-			pr_debug("%s:%d: abort at callback\n", __func__,
+			pr_devel("%s:%d: abort at callback\n", __func__,
 				__LINE__);
 			break;
 		}
 	}
 
-	pr_debug(" <- %s:%d\n", __func__, __LINE__);
+	pr_devel(" <- %s:%d\n", __func__, __LINE__);
 	return result;
 }
 
@@ -489,7 +489,7 @@ int ps3_repository_find_bus(enum ps3_bus_type bus_type, unsigned int from,
 	for (i = from; i < 10; i++) {
 		error = ps3_repository_read_bus_type(i, &type);
 		if (error) {
-			pr_debug("%s:%d read_bus_type failed\n",
+			pr_devel("%s:%d read_bus_type failed\n",
 				__func__, __LINE__);
 			*bus_index = UINT_MAX;
 			return error;
@@ -509,7 +509,7 @@ int ps3_repository_find_interrupt(const struct ps3_repository_device *repo,
 	int result = 0;
 	unsigned int res_index;
 
-	pr_debug("%s:%d: find intr_type %u\n", __func__, __LINE__, intr_type);
+	pr_devel("%s:%d: find intr_type %u\n", __func__, __LINE__, intr_type);
 
 	*interrupt_id = UINT_MAX;
 
@@ -521,7 +521,7 @@ int ps3_repository_find_interrupt(const struct ps3_repository_device *repo,
 			repo->dev_index, res_index, &t, &id);
 
 		if (result) {
-			pr_debug("%s:%d read_dev_intr failed\n",
+			pr_devel("%s:%d read_dev_intr failed\n",
 				__func__, __LINE__);
 			return result;
 		}
@@ -535,7 +535,7 @@ int ps3_repository_find_interrupt(const struct ps3_repository_device *repo,
 	if (res_index == 10)
 		return -ENODEV;
 
-	pr_debug("%s:%d: found intr_type %u at res_index %u\n",
+	pr_devel("%s:%d: found intr_type %u at res_index %u\n",
 		__func__, __LINE__, intr_type, res_index);
 
 	return result;
@@ -547,7 +547,7 @@ int ps3_repository_find_reg(const struct ps3_repository_device *repo,
 	int result = 0;
 	unsigned int res_index;
 
-	pr_debug("%s:%d: find reg_type %u\n", __func__, __LINE__, reg_type);
+	pr_devel("%s:%d: find reg_type %u\n", __func__, __LINE__, reg_type);
 
 	*bus_addr = *len = 0;
 
@@ -560,7 +560,7 @@ int ps3_repository_find_reg(const struct ps3_repository_device *repo,
 			repo->dev_index, res_index, &t, &a, &l);
 
 		if (result) {
-			pr_debug("%s:%d read_dev_reg failed\n",
+			pr_devel("%s:%d read_dev_reg failed\n",
 				__func__, __LINE__);
 			return result;
 		}
@@ -575,7 +575,7 @@ int ps3_repository_find_reg(const struct ps3_repository_device *repo,
 	if (res_index == 10)
 		return -ENODEV;
 
-	pr_debug("%s:%d: found reg_type %u at res_index %u\n",
+	pr_devel("%s:%d: found reg_type %u at res_index %u\n",
 		__func__, __LINE__, reg_type, res_index);
 
 	return result;
@@ -1009,7 +1009,7 @@ int ps3_repository_dump_resource_info(const struct ps3_repository_device *repo)
 	int result = 0;
 	unsigned int res_index;
 
-	pr_debug(" -> %s:%d: (%u:%u)\n", __func__, __LINE__,
+	pr_devel(" -> %s:%d: (%u:%u)\n", __func__, __LINE__,
 		repo->bus_index, repo->dev_index);
 
 	for (res_index = 0; res_index < 10; res_index++) {
@@ -1021,13 +1021,13 @@ int ps3_repository_dump_resource_info(const struct ps3_repository_device *repo)
 
 		if (result) {
 			if (result !=  LV1_NO_ENTRY)
-				pr_debug("%s:%d ps3_repository_read_dev_intr"
+				pr_devel("%s:%d ps3_repository_read_dev_intr"
 					" (%u:%u) failed\n", __func__, __LINE__,
 					repo->bus_index, repo->dev_index);
 			break;
 		}
 
-		pr_debug("%s:%d (%u:%u) intr_type %u, interrupt_id %u\n",
+		pr_devel("%s:%d (%u:%u) intr_type %u, interrupt_id %u\n",
 			__func__, __LINE__, repo->bus_index, repo->dev_index,
 			intr_type, interrupt_id);
 	}
@@ -1042,18 +1042,18 @@ int ps3_repository_dump_resource_info(const struct ps3_repository_device *repo)
 
 		if (result) {
 			if (result !=  LV1_NO_ENTRY)
-				pr_debug("%s:%d ps3_repository_read_dev_reg"
+				pr_devel("%s:%d ps3_repository_read_dev_reg"
 					" (%u:%u) failed\n", __func__, __LINE__,
 					repo->bus_index, repo->dev_index);
 			break;
 		}
 
-		pr_debug("%s:%d (%u:%u) reg_type %u, bus_addr %lxh, len %lxh\n",
+		pr_devel("%s:%d (%u:%u) reg_type %u, bus_addr %llxh, len %llxh\n",
 			__func__, __LINE__, repo->bus_index, repo->dev_index,
 			reg_type, bus_addr, len);
 	}
 
-	pr_debug(" <- %s:%d\n", __func__, __LINE__);
+	pr_devel(" <- %s:%d\n", __func__, __LINE__);
 	return result;
 }
 
@@ -1063,22 +1063,22 @@ static int dump_stor_dev_info(struct ps3_repository_device *repo)
 	unsigned int num_regions, region_index;
 	u64 port, blk_size, num_blocks;
 
-	pr_debug(" -> %s:%d: (%u:%u)\n", __func__, __LINE__,
+	pr_devel(" -> %s:%d: (%u:%u)\n", __func__, __LINE__,
 		repo->bus_index, repo->dev_index);
 
 	result = ps3_repository_read_stor_dev_info(repo->bus_index,
 		repo->dev_index, &port, &blk_size, &num_blocks, &num_regions);
 	if (result) {
-		pr_debug("%s:%d ps3_repository_read_stor_dev_info"
+		pr_devel("%s:%d ps3_repository_read_stor_dev_info"
 			" (%u:%u) failed\n", __func__, __LINE__,
 			repo->bus_index, repo->dev_index);
 		goto out;
 	}
 
-	pr_debug("%s:%d  (%u:%u): port %lu, blk_size %lu, num_blocks "
-		 "%lu, num_regions %u\n",
-		 __func__, __LINE__, repo->bus_index, repo->dev_index, port,
-		 blk_size, num_blocks, num_regions);
+	pr_devel("%s:%d  (%u:%u): port %llu, blk_size %llu, num_blocks "
+		 "%llu, num_regions %u\n",
+		 __func__, __LINE__, repo->bus_index, repo->dev_index,
+		port, blk_size, num_blocks, num_regions);
 
 	for (region_index = 0; region_index < num_regions; region_index++) {
 		unsigned int region_id;
@@ -1088,19 +1088,20 @@ static int dump_stor_dev_info(struct ps3_repository_device *repo)
 			repo->dev_index, region_index, &region_id,
 			&region_start, &region_size);
 		if (result) {
-			 pr_debug("%s:%d ps3_repository_read_stor_dev_region"
+			 pr_devel("%s:%d ps3_repository_read_stor_dev_region"
 				  " (%u:%u) failed\n", __func__, __LINE__,
 				  repo->bus_index, repo->dev_index);
 			break;
 		}
 
-		pr_debug("%s:%d (%u:%u) region_id %u, start %lxh, size %lxh\n",
+		pr_devel("%s:%d (%u:%u) region_id %u, start %lxh, size %lxh\n",
 			__func__, __LINE__, repo->bus_index, repo->dev_index,
-			region_id, region_start, region_size);
+			region_id, (unsigned long)region_start,
+			(unsigned long)region_size);
 	}
 
 out:
-	pr_debug(" <- %s:%d\n", __func__, __LINE__);
+	pr_devel(" <- %s:%d\n", __func__, __LINE__);
 	return result;
 }
 
@@ -1109,7 +1110,7 @@ static int dump_device_info(struct ps3_repository_device *repo,
 {
 	int result = 0;
 
-	pr_debug(" -> %s:%d: bus_%u\n", __func__, __LINE__, repo->bus_index);
+	pr_devel(" -> %s:%d: bus_%u\n", __func__, __LINE__, repo->bus_index);
 
 	for (repo->dev_index = 0; repo->dev_index < num_dev;
 		repo->dev_index++) {
@@ -1118,7 +1119,7 @@ static int dump_device_info(struct ps3_repository_device *repo,
 			repo->dev_index, &repo->dev_type);
 
 		if (result) {
-			pr_debug("%s:%d ps3_repository_read_dev_type"
+			pr_devel("%s:%d ps3_repository_read_dev_type"
 				" (%u:%u) failed\n", __func__, __LINE__,
 				repo->bus_index, repo->dev_index);
 			break;
@@ -1128,15 +1129,15 @@ static int dump_device_info(struct ps3_repository_device *repo,
 			repo->dev_index, &repo->dev_id);
 
 		if (result) {
-			pr_debug("%s:%d ps3_repository_read_dev_id"
+			pr_devel("%s:%d ps3_repository_read_dev_id"
 				" (%u:%u) failed\n", __func__, __LINE__,
 				repo->bus_index, repo->dev_index);
 			continue;
 		}
 
-		pr_debug("%s:%d  (%u:%u): dev_type %u, dev_id %lu\n", __func__,
+		pr_devel("%s:%d  (%u:%u): dev_type %u, dev_id %lu\n", __func__,
 			__LINE__, repo->bus_index, repo->dev_index,
-			repo->dev_type, repo->dev_id);
+			repo->dev_type, (unsigned long)repo->dev_id);
 
 		ps3_repository_dump_resource_info(repo);
 
@@ -1144,7 +1145,7 @@ static int dump_device_info(struct ps3_repository_device *repo,
 			dump_stor_dev_info(repo);
 	}
 
-	pr_debug(" <- %s:%d\n", __func__, __LINE__);
+	pr_devel(" <- %s:%d\n", __func__, __LINE__);
 	return result;
 }
 
@@ -1153,7 +1154,7 @@ int ps3_repository_dump_bus_info(void)
 	int result = 0;
 	struct ps3_repository_device repo;
 
-	pr_debug(" -> %s:%d\n", __func__, __LINE__);
+	pr_devel(" -> %s:%d\n", __func__, __LINE__);
 
 	memset(&repo, 0, sizeof(repo));
 
@@ -1164,7 +1165,7 @@ int ps3_repository_dump_bus_info(void)
 			&repo.bus_type);
 
 		if (result) {
-			pr_debug("%s:%d read_bus_type(%u) failed\n",
+			pr_devel("%s:%d read_bus_type(%u) failed\n",
 				__func__, __LINE__, repo.bus_index);
 			break;
 		}
@@ -1173,32 +1174,32 @@ int ps3_repository_dump_bus_info(void)
 			&repo.bus_id);
 
 		if (result) {
-			pr_debug("%s:%d read_bus_id(%u) failed\n",
+			pr_devel("%s:%d read_bus_id(%u) failed\n",
 				__func__, __LINE__, repo.bus_index);
 			continue;
 		}
 
 		if (repo.bus_index != repo.bus_id)
-			pr_debug("%s:%d bus_index != bus_id\n",
+			pr_devel("%s:%d bus_index != bus_id\n",
 				__func__, __LINE__);
 
 		result = ps3_repository_read_bus_num_dev(repo.bus_index,
 			&num_dev);
 
 		if (result) {
-			pr_debug("%s:%d read_bus_num_dev(%u) failed\n",
+			pr_devel("%s:%d read_bus_num_dev(%u) failed\n",
 				__func__, __LINE__, repo.bus_index);
 			continue;
 		}
 
-		pr_debug("%s:%d bus_%u: bus_type %u, bus_id %lu, num_dev %u\n",
+		pr_devel("%s:%d bus_%u: bus_type %u, bus_id %lu, num_dev %u\n",
 			__func__, __LINE__, repo.bus_index, repo.bus_type,
-			repo.bus_id, num_dev);
+			(unsigned long)repo.bus_id, num_dev);
 
 		dump_device_info(&repo, num_dev);
 	}
 
-	pr_debug(" <- %s:%d\n", __func__, __LINE__);
+	pr_devel(" <- %s:%d\n", __func__, __LINE__);
 	return result;
 }
 
diff --git a/arch/powerpc/platforms/ps3/setup.c b/arch/powerpc/platforms/ps3/setup.c
index e8ec1b2bfff..2d664c5a83b 100644
--- a/arch/powerpc/platforms/ps3/setup.c
+++ b/arch/powerpc/platforms/ps3/setup.c
@@ -193,10 +193,12 @@ static int ps3_set_dabr(unsigned long dabr)
 
 static void __init ps3_setup_arch(void)
 {
+	u64 tmp;
 
 	DBG(" -> %s:%d\n", __func__, __LINE__);
 
-	lv1_get_version_info(&ps3_firmware_version.raw);
+	lv1_get_version_info(&ps3_firmware_version.raw, &tmp);
+
 	printk(KERN_INFO "PS3 firmware version %u.%u.%u\n",
 	       ps3_firmware_version.major, ps3_firmware_version.minor,
 	       ps3_firmware_version.rev);
diff --git a/arch/powerpc/platforms/ps3/smp.c b/arch/powerpc/platforms/ps3/smp.c
index efc1cd8c034..4b35166229f 100644
--- a/arch/powerpc/platforms/ps3/smp.c
+++ b/arch/powerpc/platforms/ps3/smp.c
@@ -57,7 +57,7 @@ static void ps3_smp_message_pass(int cpu, int msg)
 			" (%d)\n", __func__, __LINE__, cpu, msg, result);
 }
 
-static int ps3_smp_probe(void)
+static int __init ps3_smp_probe(void)
 {
 	int cpu;
 
diff --git a/arch/powerpc/platforms/ps3/spu.c b/arch/powerpc/platforms/ps3/spu.c
index 451fad1c92a..e17fa1432d8 100644
--- a/arch/powerpc/platforms/ps3/spu.c
+++ b/arch/powerpc/platforms/ps3/spu.c
@@ -154,7 +154,7 @@ static unsigned long get_vas_id(void)
 	u64 id;
 
 	lv1_get_logical_ppe_id(&id);
-	lv1_get_virtual_address_space_id_of_ppe(id, &id);
+	lv1_get_virtual_address_space_id_of_ppe(&id);
 
 	return id;
 }
diff --git a/arch/powerpc/platforms/pseries/Kconfig b/arch/powerpc/platforms/pseries/Kconfig
index c81f6bb9c10..ae7b6d41fed 100644
--- a/arch/powerpc/platforms/pseries/Kconfig
+++ b/arch/powerpc/platforms/pseries/Kconfig
@@ -120,3 +120,12 @@ config DTL
 	  which are accessible through a debugfs file.
 
 	  Say N if you are unsure.
+
+config PSERIES_IDLE
+	tristate "Cpuidle driver for pSeries platforms"
+	depends on CPU_IDLE
+	depends on PPC_PSERIES
+	default y
+	help
+	  Select this option to enable processor idle state management
+	  through cpuidle subsystem.
diff --git a/arch/powerpc/platforms/pseries/Makefile b/arch/powerpc/platforms/pseries/Makefile
index 3556e402cbf..236db46b407 100644
--- a/arch/powerpc/platforms/pseries/Makefile
+++ b/arch/powerpc/platforms/pseries/Makefile
@@ -22,6 +22,7 @@ obj-$(CONFIG_PHYP_DUMP)		+= phyp_dump.o
 obj-$(CONFIG_CMM)		+= cmm.o
 obj-$(CONFIG_DTL)		+= dtl.o
 obj-$(CONFIG_IO_EVENT_IRQ)	+= io_event_irq.o
+obj-$(CONFIG_PSERIES_IDLE)	+= processor_idle.o
 
 ifeq ($(CONFIG_PPC_PSERIES),y)
 obj-$(CONFIG_SUSPEND)		+= suspend.o
diff --git a/arch/powerpc/platforms/pseries/hvCall_inst.c b/arch/powerpc/platforms/pseries/hvCall_inst.c
index f106662f438..c9311cfdfca 100644
--- a/arch/powerpc/platforms/pseries/hvCall_inst.c
+++ b/arch/powerpc/platforms/pseries/hvCall_inst.c
@@ -109,7 +109,7 @@ static void probe_hcall_entry(void *ignored, unsigned long opcode, unsigned long
 	if (opcode > MAX_HCALL_OPCODE)
 		return;
 
-	h = &get_cpu_var(hcall_stats)[opcode / 4];
+	h = &__get_cpu_var(hcall_stats)[opcode / 4];
 	h->tb_start = mftb();
 	h->purr_start = mfspr(SPRN_PURR);
 }
@@ -126,8 +126,6 @@ static void probe_hcall_exit(void *ignored, unsigned long opcode, unsigned long
 	h->num_calls++;
 	h->tb_total += mftb() - h->tb_start;
 	h->purr_total += mfspr(SPRN_PURR) - h->purr_start;
-
-	put_cpu_var(hcall_stats);
 }
 
 static int __init hcall_inst_init(void)
diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c
index b719d970973..c442f2b1980 100644
--- a/arch/powerpc/platforms/pseries/iommu.c
+++ b/arch/powerpc/platforms/pseries/iommu.c
@@ -52,13 +52,42 @@
 #include "plpar_wrappers.h"
 
 
+static void tce_invalidate_pSeries_sw(struct iommu_table *tbl,
+				      u64 *startp, u64 *endp)
+{
+	u64 __iomem *invalidate = (u64 __iomem *)tbl->it_index;
+	unsigned long start, end, inc;
+
+	start = __pa(startp);
+	end = __pa(endp);
+	inc = L1_CACHE_BYTES; /* invalidate a cacheline of TCEs at a time */
+
+	/* If this is non-zero, change the format.  We shift the
+	 * address and or in the magic from the device tree. */
+	if (tbl->it_busno) {
+		start <<= 12;
+		end <<= 12;
+		inc <<= 12;
+		start |= tbl->it_busno;
+		end |= tbl->it_busno;
+	}
+
+	end |= inc - 1; /* round up end to be different than start */
+
+	mb(); /* Make sure TCEs in memory are written */
+	while (start <= end) {
+		out_be64(invalidate, start);
+		start += inc;
+	}
+}
+
 static int tce_build_pSeries(struct iommu_table *tbl, long index,
 			      long npages, unsigned long uaddr,
 			      enum dma_data_direction direction,
 			      struct dma_attrs *attrs)
 {
 	u64 proto_tce;
-	u64 *tcep;
+	u64 *tcep, *tces;
 	u64 rpn;
 
 	proto_tce = TCE_PCI_READ; // Read allowed
@@ -66,7 +95,7 @@ static int tce_build_pSeries(struct iommu_table *tbl, long index,
 	if (direction != DMA_TO_DEVICE)
 		proto_tce |= TCE_PCI_WRITE;
 
-	tcep = ((u64 *)tbl->it_base) + index;
+	tces = tcep = ((u64 *)tbl->it_base) + index;
 
 	while (npages--) {
 		/* can't move this out since we might cross MEMBLOCK boundary */
@@ -76,18 +105,24 @@ static int tce_build_pSeries(struct iommu_table *tbl, long index,
 		uaddr += TCE_PAGE_SIZE;
 		tcep++;
 	}
+
+	if (tbl->it_type == TCE_PCI_SWINV_CREATE)
+		tce_invalidate_pSeries_sw(tbl, tces, tcep - 1);
 	return 0;
 }
 
 
 static void tce_free_pSeries(struct iommu_table *tbl, long index, long npages)
 {
-	u64 *tcep;
+	u64 *tcep, *tces;
 
-	tcep = ((u64 *)tbl->it_base) + index;
+	tces = tcep = ((u64 *)tbl->it_base) + index;
 
 	while (npages--)
 		*(tcep++) = 0;
+
+	if (tbl->it_type == TCE_PCI_SWINV_FREE)
+		tce_invalidate_pSeries_sw(tbl, tces, tcep - 1);
 }
 
 static unsigned long tce_get_pseries(struct iommu_table *tbl, long index)
@@ -425,7 +460,7 @@ static void iommu_table_setparms(struct pci_controller *phb,
 				 struct iommu_table *tbl)
 {
 	struct device_node *node;
-	const unsigned long *basep;
+	const unsigned long *basep, *sw_inval;
 	const u32 *sizep;
 
 	node = phb->dn;
@@ -462,6 +497,22 @@ static void iommu_table_setparms(struct pci_controller *phb,
 	tbl->it_index = 0;
 	tbl->it_blocksize = 16;
 	tbl->it_type = TCE_PCI;
+
+	sw_inval = of_get_property(node, "linux,tce-sw-invalidate-info", NULL);
+	if (sw_inval) {
+		/*
+		 * This property contains information on how to
+		 * invalidate the TCE entry.  The first property is
+		 * the base MMIO address used to invalidate entries.
+		 * The second property tells us the format of the TCE
+		 * invalidate (whether it needs to be shifted) and
+		 * some magic routing info to add to our invalidate
+		 * command.
+		 */
+		tbl->it_index = (unsigned long) ioremap(sw_inval[0], 8);
+		tbl->it_busno = sw_inval[1]; /* overload this with magic */
+		tbl->it_type = TCE_PCI_SWINV_CREATE | TCE_PCI_SWINV_FREE;
+	}
 }
 
 /*
diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c
index 52d429be6c7..948e0e3b354 100644
--- a/arch/powerpc/platforms/pseries/lpar.c
+++ b/arch/powerpc/platforms/pseries/lpar.c
@@ -554,6 +554,7 @@ void __trace_hcall_entry(unsigned long opcode, unsigned long *args)
 		goto out;
 
 	(*depth)++;
+	preempt_disable();
 	trace_hcall_entry(opcode, args);
 	if (opcode == H_CEDE)
 		rcu_idle_enter();
@@ -580,6 +581,7 @@ void __trace_hcall_exit(long opcode, unsigned long retval,
 	if (opcode == H_CEDE)
 		rcu_idle_exit();
 	trace_hcall_exit(opcode, retval, retbuf);
+	preempt_enable();
 	(*depth)--;
 
 out:
diff --git a/arch/powerpc/platforms/pseries/nvram.c b/arch/powerpc/platforms/pseries/nvram.c
index a76b22844d1..330a57b7c17 100644
--- a/arch/powerpc/platforms/pseries/nvram.c
+++ b/arch/powerpc/platforms/pseries/nvram.c
@@ -625,6 +625,8 @@ static void oops_to_nvram(struct kmsg_dumper *dumper,
 {
 	static unsigned int oops_count = 0;
 	static bool panicking = false;
+	static DEFINE_SPINLOCK(lock);
+	unsigned long flags;
 	size_t text_len;
 	unsigned int err_type = ERR_TYPE_KERNEL_PANIC_GZ;
 	int rc = -1;
@@ -655,6 +657,9 @@ static void oops_to_nvram(struct kmsg_dumper *dumper,
 	if (clobbering_unread_rtas_event())
 		return;
 
+	if (!spin_trylock_irqsave(&lock, flags))
+		return;
+
 	if (big_oops_buf) {
 		text_len = capture_last_msgs(old_msgs, old_len,
 			new_msgs, new_len, big_oops_buf, big_oops_buf_sz);
@@ -670,4 +675,6 @@ static void oops_to_nvram(struct kmsg_dumper *dumper,
 
 	(void) nvram_write_os_partition(&oops_log_partition, oops_buf,
 		(int) (sizeof(*oops_len) + *oops_len), err_type, ++oops_count);
+
+	spin_unlock_irqrestore(&lock, flags);
 }
diff --git a/arch/powerpc/platforms/pseries/processor_idle.c b/arch/powerpc/platforms/pseries/processor_idle.c
new file mode 100644
index 00000000000..085fd3f45ad
--- /dev/null
+++ b/arch/powerpc/platforms/pseries/processor_idle.c
@@ -0,0 +1,329 @@
+/*
+ *  processor_idle - idle state cpuidle driver.
+ *  Adapted from drivers/idle/intel_idle.c and
+ *  drivers/acpi/processor_idle.c
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/moduleparam.h>
+#include <linux/cpuidle.h>
+#include <linux/cpu.h>
+
+#include <asm/paca.h>
+#include <asm/reg.h>
+#include <asm/system.h>
+#include <asm/machdep.h>
+#include <asm/firmware.h>
+
+#include "plpar_wrappers.h"
+#include "pseries.h"
+
+struct cpuidle_driver pseries_idle_driver = {
+	.name =		"pseries_idle",
+	.owner =	THIS_MODULE,
+};
+
+#define MAX_IDLE_STATE_COUNT	2
+
+static int max_idle_state = MAX_IDLE_STATE_COUNT - 1;
+static struct cpuidle_device __percpu *pseries_cpuidle_devices;
+static struct cpuidle_state *cpuidle_state_table;
+
+void update_smt_snooze_delay(int snooze)
+{
+	struct cpuidle_driver *drv = cpuidle_get_driver();
+	if (drv)
+		drv->states[0].target_residency = snooze;
+}
+
+static inline void idle_loop_prolog(unsigned long *in_purr, ktime_t *kt_before)
+{
+
+	*kt_before = ktime_get_real();
+	*in_purr = mfspr(SPRN_PURR);
+	/*
+	 * Indicate to the HV that we are idle. Now would be
+	 * a good time to find other work to dispatch.
+	 */
+	get_lppaca()->idle = 1;
+}
+
+static inline  s64 idle_loop_epilog(unsigned long in_purr, ktime_t kt_before)
+{
+	get_lppaca()->wait_state_cycles += mfspr(SPRN_PURR) - in_purr;
+	get_lppaca()->idle = 0;
+
+	return ktime_to_us(ktime_sub(ktime_get_real(), kt_before));
+}
+
+static int snooze_loop(struct cpuidle_device *dev,
+			struct cpuidle_driver *drv,
+			int index)
+{
+	unsigned long in_purr;
+	ktime_t kt_before;
+	unsigned long start_snooze;
+	long snooze = drv->states[0].target_residency;
+
+	idle_loop_prolog(&in_purr, &kt_before);
+
+	if (snooze) {
+		start_snooze = get_tb() + snooze * tb_ticks_per_usec;
+		local_irq_enable();
+		set_thread_flag(TIF_POLLING_NRFLAG);
+
+		while ((snooze < 0) || (get_tb() < start_snooze)) {
+			if (need_resched() || cpu_is_offline(dev->cpu))
+				goto out;
+			ppc64_runlatch_off();
+			HMT_low();
+			HMT_very_low();
+		}
+
+		HMT_medium();
+		clear_thread_flag(TIF_POLLING_NRFLAG);
+		smp_mb();
+		local_irq_disable();
+	}
+
+out:
+	HMT_medium();
+	dev->last_residency =
+		(int)idle_loop_epilog(in_purr, kt_before);
+	return index;
+}
+
+static int dedicated_cede_loop(struct cpuidle_device *dev,
+				struct cpuidle_driver *drv,
+				int index)
+{
+	unsigned long in_purr;
+	ktime_t kt_before;
+
+	idle_loop_prolog(&in_purr, &kt_before);
+	get_lppaca()->donate_dedicated_cpu = 1;
+
+	ppc64_runlatch_off();
+	HMT_medium();
+	cede_processor();
+
+	get_lppaca()->donate_dedicated_cpu = 0;
+	dev->last_residency =
+		(int)idle_loop_epilog(in_purr, kt_before);
+	return index;
+}
+
+static int shared_cede_loop(struct cpuidle_device *dev,
+			struct cpuidle_driver *drv,
+			int index)
+{
+	unsigned long in_purr;
+	ktime_t kt_before;
+
+	idle_loop_prolog(&in_purr, &kt_before);
+
+	/*
+	 * Yield the processor to the hypervisor.  We return if
+	 * an external interrupt occurs (which are driven prior
+	 * to returning here) or if a prod occurs from another
+	 * processor. When returning here, external interrupts
+	 * are enabled.
+	 */
+	cede_processor();
+
+	dev->last_residency =
+		(int)idle_loop_epilog(in_purr, kt_before);
+	return index;
+}
+
+/*
+ * States for dedicated partition case.
+ */
+static struct cpuidle_state dedicated_states[MAX_IDLE_STATE_COUNT] = {
+	{ /* Snooze */
+		.name = "snooze",
+		.desc = "snooze",
+		.flags = CPUIDLE_FLAG_TIME_VALID,
+		.exit_latency = 0,
+		.target_residency = 0,
+		.enter = &snooze_loop },
+	{ /* CEDE */
+		.name = "CEDE",
+		.desc = "CEDE",
+		.flags = CPUIDLE_FLAG_TIME_VALID,
+		.exit_latency = 1,
+		.target_residency = 10,
+		.enter = &dedicated_cede_loop },
+};
+
+/*
+ * States for shared partition case.
+ */
+static struct cpuidle_state shared_states[MAX_IDLE_STATE_COUNT] = {
+	{ /* Shared Cede */
+		.name = "Shared Cede",
+		.desc = "Shared Cede",
+		.flags = CPUIDLE_FLAG_TIME_VALID,
+		.exit_latency = 0,
+		.target_residency = 0,
+		.enter = &shared_cede_loop },
+};
+
+int pseries_notify_cpuidle_add_cpu(int cpu)
+{
+	struct cpuidle_device *dev =
+			per_cpu_ptr(pseries_cpuidle_devices, cpu);
+	if (dev && cpuidle_get_driver()) {
+		cpuidle_disable_device(dev);
+		cpuidle_enable_device(dev);
+	}
+	return 0;
+}
+
+/*
+ * pseries_cpuidle_driver_init()
+ */
+static int pseries_cpuidle_driver_init(void)
+{
+	int idle_state;
+	struct cpuidle_driver *drv = &pseries_idle_driver;
+
+	drv->state_count = 0;
+
+	for (idle_state = 0; idle_state < MAX_IDLE_STATE_COUNT; ++idle_state) {
+
+		if (idle_state > max_idle_state)
+			break;
+
+		/* is the state not enabled? */
+		if (cpuidle_state_table[idle_state].enter == NULL)
+			continue;
+
+		drv->states[drv->state_count] =	/* structure copy */
+			cpuidle_state_table[idle_state];
+
+		if (cpuidle_state_table == dedicated_states)
+			drv->states[drv->state_count].target_residency =
+				__get_cpu_var(smt_snooze_delay);
+
+		drv->state_count += 1;
+	}
+
+	return 0;
+}
+
+/* pseries_idle_devices_uninit(void)
+ * unregister cpuidle devices and de-allocate memory
+ */
+static void pseries_idle_devices_uninit(void)
+{
+	int i;
+	struct cpuidle_device *dev;
+
+	for_each_possible_cpu(i) {
+		dev = per_cpu_ptr(pseries_cpuidle_devices, i);
+		cpuidle_unregister_device(dev);
+	}
+
+	free_percpu(pseries_cpuidle_devices);
+	return;
+}
+
+/* pseries_idle_devices_init()
+ * allocate, initialize and register cpuidle device
+ */
+static int pseries_idle_devices_init(void)
+{
+	int i;
+	struct cpuidle_driver *drv = &pseries_idle_driver;
+	struct cpuidle_device *dev;
+
+	pseries_cpuidle_devices = alloc_percpu(struct cpuidle_device);
+	if (pseries_cpuidle_devices == NULL)
+		return -ENOMEM;
+
+	for_each_possible_cpu(i) {
+		dev = per_cpu_ptr(pseries_cpuidle_devices, i);
+		dev->state_count = drv->state_count;
+		dev->cpu = i;
+		if (cpuidle_register_device(dev)) {
+			printk(KERN_DEBUG \
+				"cpuidle_register_device %d failed!\n", i);
+			return -EIO;
+		}
+	}
+
+	return 0;
+}
+
+/*
+ * pseries_idle_probe()
+ * Choose state table for shared versus dedicated partition
+ */
+static int pseries_idle_probe(void)
+{
+
+	if (!firmware_has_feature(FW_FEATURE_SPLPAR))
+		return -ENODEV;
+
+	if (cpuidle_disable != IDLE_NO_OVERRIDE)
+		return -ENODEV;
+
+	if (max_idle_state == 0) {
+		printk(KERN_DEBUG "pseries processor idle disabled.\n");
+		return -EPERM;
+	}
+
+	if (get_lppaca()->shared_proc)
+		cpuidle_state_table = shared_states;
+	else
+		cpuidle_state_table = dedicated_states;
+
+	return 0;
+}
+
+static int __init pseries_processor_idle_init(void)
+{
+	int retval;
+
+	retval = pseries_idle_probe();
+	if (retval)
+		return retval;
+
+	pseries_cpuidle_driver_init();
+	retval = cpuidle_register_driver(&pseries_idle_driver);
+	if (retval) {
+		printk(KERN_DEBUG "Registration of pseries driver failed.\n");
+		return retval;
+	}
+
+	retval = pseries_idle_devices_init();
+	if (retval) {
+		pseries_idle_devices_uninit();
+		cpuidle_unregister_driver(&pseries_idle_driver);
+		return retval;
+	}
+
+	printk(KERN_DEBUG "pseries_idle_driver registered\n");
+
+	return 0;
+}
+
+static void __exit pseries_processor_idle_exit(void)
+{
+
+	pseries_idle_devices_uninit();
+	cpuidle_unregister_driver(&pseries_idle_driver);
+
+	return;
+}
+
+module_init(pseries_processor_idle_init);
+module_exit(pseries_processor_idle_exit);
+
+MODULE_AUTHOR("Deepthi Dharwar <deepthi@linux.vnet.ibm.com>");
+MODULE_DESCRIPTION("Cpuidle driver for POWER");
+MODULE_LICENSE("GPL");
diff --git a/arch/powerpc/platforms/pseries/pseries.h b/arch/powerpc/platforms/pseries/pseries.h
index 24c7162f11d..9a3dda07566 100644
--- a/arch/powerpc/platforms/pseries/pseries.h
+++ b/arch/powerpc/platforms/pseries/pseries.h
@@ -57,4 +57,7 @@ extern struct device_node *dlpar_configure_connector(u32);
 extern int dlpar_attach_node(struct device_node *);
 extern int dlpar_detach_node(struct device_node *);
 
+/* Snooze Delay, pseries_idle */
+DECLARE_PER_CPU(long, smt_snooze_delay);
+
 #endif /* _PSERIES_PSERIES_H */
diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index c3408ca8855..f79f1278dfc 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -39,6 +39,7 @@
 #include <linux/irq.h>
 #include <linux/seq_file.h>
 #include <linux/root_dev.h>
+#include <linux/cpuidle.h>
 
 #include <asm/mmu.h>
 #include <asm/processor.h>
@@ -74,9 +75,6 @@ EXPORT_SYMBOL(CMO_PageSize);
 
 int fwnmi_active;  /* TRUE if an FWNMI handler is present */
 
-static void pseries_shared_idle_sleep(void);
-static void pseries_dedicated_idle_sleep(void);
-
 static struct device_node *pSeries_mpic_node;
 
 static void pSeries_show_cpuinfo(struct seq_file *m)
@@ -192,8 +190,7 @@ static void __init pseries_mpic_init_IRQ(void)
 	BUG_ON(openpic_addr == 0);
 
 	/* Setup the openpic driver */
-	mpic = mpic_alloc(pSeries_mpic_node, openpic_addr,
-			  MPIC_PRIMARY,
+	mpic = mpic_alloc(pSeries_mpic_node, openpic_addr, 0,
 			  16, 250, /* isu size, irq count */
 			  " MPIC     ");
 	BUG_ON(mpic == NULL);
@@ -352,8 +349,25 @@ static int alloc_dispatch_log_kmem_cache(void)
 }
 early_initcall(alloc_dispatch_log_kmem_cache);
 
+static void pSeries_idle(void)
+{
+	/* This would call on the cpuidle framework, and the back-end pseries
+	 * driver to  go to idle states
+	 */
+	if (cpuidle_idle_call()) {
+		/* On error, execute default handler
+		 * to go into low thread priority and possibly
+		 * low power mode.
+		 */
+		HMT_low();
+		HMT_very_low();
+	}
+}
+
 static void __init pSeries_setup_arch(void)
 {
+	panic_timeout = 10;
+
 	/* Discover PIC type and setup ppc_md accordingly */
 	pseries_discover_pic();
 
@@ -374,18 +388,9 @@ static void __init pSeries_setup_arch(void)
 
 	pSeries_nvram_init();
 
-	/* Choose an idle loop */
 	if (firmware_has_feature(FW_FEATURE_SPLPAR)) {
 		vpa_init(boot_cpuid);
-		if (get_lppaca()->shared_proc) {
-			printk(KERN_DEBUG "Using shared processor idle loop\n");
-			ppc_md.power_save = pseries_shared_idle_sleep;
-		} else {
-			printk(KERN_DEBUG "Using dedicated idle loop\n");
-			ppc_md.power_save = pseries_dedicated_idle_sleep;
-		}
-	} else {
-		printk(KERN_DEBUG "Using default idle loop\n");
+		ppc_md.power_save = pSeries_idle;
 	}
 
 	if (firmware_has_feature(FW_FEATURE_LPAR))
@@ -586,80 +591,6 @@ static int __init pSeries_probe(void)
 	return 1;
 }
 
-
-DECLARE_PER_CPU(long, smt_snooze_delay);
-
-static void pseries_dedicated_idle_sleep(void)
-{ 
-	unsigned int cpu = smp_processor_id();
-	unsigned long start_snooze;
-	unsigned long in_purr, out_purr;
-	long snooze = __get_cpu_var(smt_snooze_delay);
-
-	/*
-	 * Indicate to the HV that we are idle. Now would be
-	 * a good time to find other work to dispatch.
-	 */
-	get_lppaca()->idle = 1;
-	get_lppaca()->donate_dedicated_cpu = 1;
-	in_purr = mfspr(SPRN_PURR);
-
-	/*
-	 * We come in with interrupts disabled, and need_resched()
-	 * has been checked recently.  If we should poll for a little
-	 * while, do so.
-	 */
-	if (snooze) {
-		start_snooze = get_tb() + snooze * tb_ticks_per_usec;
-		local_irq_enable();
-		set_thread_flag(TIF_POLLING_NRFLAG);
-
-		while ((snooze < 0) || (get_tb() < start_snooze)) {
-			if (need_resched() || cpu_is_offline(cpu))
-				goto out;
-			ppc64_runlatch_off();
-			HMT_low();
-			HMT_very_low();
-		}
-
-		HMT_medium();
-		clear_thread_flag(TIF_POLLING_NRFLAG);
-		smp_mb();
-		local_irq_disable();
-		if (need_resched() || cpu_is_offline(cpu))
-			goto out;
-	}
-
-	cede_processor();
-
-out:
-	HMT_medium();
-	out_purr = mfspr(SPRN_PURR);
-	get_lppaca()->wait_state_cycles += out_purr - in_purr;
-	get_lppaca()->donate_dedicated_cpu = 0;
-	get_lppaca()->idle = 0;
-}
-
-static void pseries_shared_idle_sleep(void)
-{
-	/*
-	 * Indicate to the HV that we are idle. Now would be
-	 * a good time to find other work to dispatch.
-	 */
-	get_lppaca()->idle = 1;
-
-	/*
-	 * Yield the processor to the hypervisor.  We return if
-	 * an external interrupt occurs (which are driven prior
-	 * to returning here) or if a prod occurs from another
-	 * processor. When returning here, external interrupts
-	 * are enabled.
-	 */
-	cede_processor();
-
-	get_lppaca()->idle = 0;
-}
-
 static int pSeries_pci_probe_mode(struct pci_bus *bus)
 {
 	if (firmware_has_feature(FW_FEATURE_LPAR))
diff --git a/arch/powerpc/platforms/pseries/smp.c b/arch/powerpc/platforms/pseries/smp.c
index 26e93fd4c62..bbc3c42f673 100644
--- a/arch/powerpc/platforms/pseries/smp.c
+++ b/arch/powerpc/platforms/pseries/smp.c
@@ -148,6 +148,7 @@ static void __devinit smp_xics_setup_cpu(int cpu)
 	set_cpu_current_state(cpu, CPU_STATE_ONLINE);
 	set_default_offline_state(cpu);
 #endif
+	pseries_notify_cpuidle_add_cpu(cpu);
 }
 
 static int __devinit smp_pSeries_kick_cpu(int nr)
diff --git a/arch/powerpc/platforms/wsp/Kconfig b/arch/powerpc/platforms/wsp/Kconfig
index bd560c786ed..57d22a2f4ba 100644
--- a/arch/powerpc/platforms/wsp/Kconfig
+++ b/arch/powerpc/platforms/wsp/Kconfig
@@ -1,20 +1,28 @@
 config PPC_WSP
 	bool
 	select PPC_A2
+	select GENERIC_TBSYNC
+	select PPC_ICSWX
 	select PPC_SCOM
 	select PPC_XICS
 	select PPC_ICP_NATIVE
 	select PCI
 	select PPC_IO_WORKAROUNDS if PCI
 	select PPC_INDIRECT_PIO if PCI
+	select PPC_WSP_COPRO
 	default n
 
 menu "WSP platform selection"
 	depends on PPC_BOOK3E_64
 
 config PPC_PSR2
-	bool "PSR-2 platform"
-	select GENERIC_TBSYNC
+	bool "PowerEN System Reference Platform 2"
+	select EPAPR_BOOT
+	select PPC_WSP
+	default y
+
+config PPC_CHROMA
+	bool "PowerEN PCIe Chroma Card"
 	select EPAPR_BOOT
 	select PPC_WSP
 	default y
diff --git a/arch/powerpc/platforms/wsp/Makefile b/arch/powerpc/platforms/wsp/Makefile
index a1486b436f0..56817ac98fc 100644
--- a/arch/powerpc/platforms/wsp/Makefile
+++ b/arch/powerpc/platforms/wsp/Makefile
@@ -1,8 +1,10 @@
 ccflags-y			+= -mno-minimal-toc
 
-obj-y				+= setup.o ics.o
-obj-$(CONFIG_PPC_PSR2)		+= psr2.o opb_pic.o
+obj-y				+= setup.o ics.o wsp.o
+obj-$(CONFIG_PPC_PSR2)		+= psr2.o
+obj-$(CONFIG_PPC_CHROMA)	+= chroma.o h8.o
+obj-$(CONFIG_PPC_WSP)		+= opb_pic.o
 obj-$(CONFIG_PPC_WSP)		+= scom_wsp.o
 obj-$(CONFIG_SMP)		+= smp.o scom_smp.o
 obj-$(CONFIG_PCI)		+= wsp_pci.o
-obj-$(CONFIG_PCI_MSI)		+= msi.o
\ No newline at end of file
+obj-$(CONFIG_PCI_MSI)		+= msi.o
diff --git a/arch/powerpc/platforms/wsp/chroma.c b/arch/powerpc/platforms/wsp/chroma.c
new file mode 100644
index 00000000000..ca6fa26f6e6
--- /dev/null
+++ b/arch/powerpc/platforms/wsp/chroma.c
@@ -0,0 +1,56 @@
+/*
+ * Copyright 2008-2011, IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/of.h>
+#include <linux/smp.h>
+#include <linux/time.h>
+
+#include <asm/machdep.h>
+#include <asm/system.h>
+#include <asm/udbg.h>
+
+#include "ics.h"
+#include "wsp.h"
+
+void __init chroma_setup_arch(void)
+{
+	wsp_setup_arch();
+	wsp_setup_h8();
+
+}
+
+static int __init chroma_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+
+	if (!of_flat_dt_is_compatible(root, "ibm,wsp-chroma"))
+		return 0;
+
+	return 1;
+}
+
+define_machine(chroma_md) {
+	.name			= "Chroma PCIe",
+	.probe			= chroma_probe,
+	.setup_arch		= chroma_setup_arch,
+	.restart		= wsp_h8_restart,
+	.power_off		= wsp_h8_power_off,
+	.halt			= wsp_halt,
+	.calibrate_decr		= generic_calibrate_decr,
+	.init_IRQ		= wsp_setup_irq,
+	.progress		= udbg_progress,
+	.power_save		= book3e_idle,
+};
+
+machine_arch_initcall(chroma_md, wsp_probe_devices);
diff --git a/arch/powerpc/platforms/wsp/h8.c b/arch/powerpc/platforms/wsp/h8.c
new file mode 100644
index 00000000000..d18e6cc19df
--- /dev/null
+++ b/arch/powerpc/platforms/wsp/h8.c
@@ -0,0 +1,134 @@
+/*
+ * Copyright 2008-2011, IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/io.h>
+
+#include "wsp.h"
+
+/*
+ * The UART connection to the H8 is over ttyS1 which is just a 16550.
+ * We assume that FW has it setup right and no one messes with it.
+ */
+
+
+static u8 __iomem *h8;
+
+#define RBR 0		/* Receiver Buffer Register */
+#define THR 0		/* Transmitter Holding Register */
+#define LSR 5		/* Line Status Register */
+#define LSR_DR 0x01	/* LSR value for Data-Ready */
+#define LSR_THRE 0x20	/* LSR value for Transmitter-Holding-Register-Empty */
+static void wsp_h8_putc(int c)
+{
+	u8 lsr;
+
+	do {
+		lsr = readb(h8 + LSR);
+	} while ((lsr & LSR_THRE) != LSR_THRE);
+	writeb(c, h8 + THR);
+}
+
+static int wsp_h8_getc(void)
+{
+	u8 lsr;
+
+	do {
+		lsr = readb(h8 + LSR);
+	} while ((lsr & LSR_DR) != LSR_DR);
+
+	return readb(h8 + RBR);
+}
+
+static void wsp_h8_puts(const char *s, int sz)
+{
+	int i;
+
+	for (i = 0; i < sz; i++) {
+		wsp_h8_putc(s[i]);
+
+		/* no flow control so wait for echo */
+		wsp_h8_getc();
+	}
+	wsp_h8_putc('\r');
+	wsp_h8_putc('\n');
+}
+
+static void wsp_h8_terminal_cmd(const char *cmd, int sz)
+{
+	hard_irq_disable();
+	wsp_h8_puts(cmd, sz);
+	/* should never return, but just in case */
+	for (;;)
+		continue;
+}
+
+
+void wsp_h8_restart(char *cmd)
+{
+	static const char restart[] = "warm-reset";
+
+	(void)cmd;
+	wsp_h8_terminal_cmd(restart, sizeof(restart) - 1);
+}
+
+void wsp_h8_power_off(void)
+{
+	static const char off[] = "power-off";
+
+	wsp_h8_terminal_cmd(off, sizeof(off) - 1);
+}
+
+static void __iomem *wsp_h8_getaddr(void)
+{
+	struct device_node *aliases;
+	struct device_node *uart;
+	struct property *path;
+	void __iomem *va = NULL;
+
+	/*
+	 * there is nothing in the devtree to tell us which is mapped
+	 * to the H8, but se know it is the second serial port.
+	 */
+
+	aliases = of_find_node_by_path("/aliases");
+	if (aliases == NULL)
+		return NULL;
+
+	path = of_find_property(aliases, "serial1", NULL);
+	if (path == NULL)
+		goto out;
+
+	uart = of_find_node_by_path(path->value);
+	if (uart == NULL)
+		goto out;
+
+	va = of_iomap(uart, 0);
+
+	/* remove it so no one messes with it */
+	of_detach_node(uart);
+	of_node_put(uart);
+
+out:
+	of_node_put(aliases);
+
+	return va;
+}
+
+void __init wsp_setup_h8(void)
+{
+	h8 = wsp_h8_getaddr();
+
+	/* Devtree change? lets hard map it anyway */
+	if (h8 == NULL) {
+		pr_warn("UART to H8 could not be found");
+		h8 = ioremap(0xffc0008000ULL, 0x100);
+	}
+}
diff --git a/arch/powerpc/platforms/wsp/opb_pic.c b/arch/powerpc/platforms/wsp/opb_pic.c
index be05631a3c1..19f353dfcd0 100644
--- a/arch/powerpc/platforms/wsp/opb_pic.c
+++ b/arch/powerpc/platforms/wsp/opb_pic.c
@@ -320,7 +320,8 @@ void __init opb_pic_init(void)
 		}
 
 		/* Attach opb interrupt handler to new virtual IRQ */
-		rc = request_irq(virq, opb_irq_handler, 0, "OPB LS Cascade", opb);
+		rc = request_irq(virq, opb_irq_handler, IRQF_NO_THREAD,
+				 "OPB LS Cascade", opb);
 		if (rc) {
 			printk("opb: request_irq failed: %d\n", rc);
 			continue;
diff --git a/arch/powerpc/platforms/wsp/psr2.c b/arch/powerpc/platforms/wsp/psr2.c
index 166f2e4b4be..0c1ae06d0be 100644
--- a/arch/powerpc/platforms/wsp/psr2.c
+++ b/arch/powerpc/platforms/wsp/psr2.c
@@ -14,10 +14,10 @@
 #include <linux/mm.h>
 #include <linux/of.h>
 #include <linux/smp.h>
+#include <linux/time.h>
 
 #include <asm/machdep.h>
 #include <asm/system.h>
-#include <asm/time.h>
 #include <asm/udbg.h>
 
 #include "ics.h"
@@ -27,7 +27,8 @@
 static void psr2_spin(void)
 {
 	hard_irq_disable();
-	for (;;) ;
+	for (;;)
+		continue;
 }
 
 static void psr2_restart(char *cmd)
@@ -35,65 +36,32 @@ static void psr2_restart(char *cmd)
 	psr2_spin();
 }
 
-static int psr2_probe_devices(void)
-{
-	struct device_node *np;
-
-	/* Our RTC is a ds1500. It seems to be programatically compatible
-	 * with the ds1511 for which we have a driver so let's use that
-	 */
-	np = of_find_compatible_node(NULL, NULL, "dallas,ds1500");
-	if (np != NULL) {
-		struct resource res;
-		if (of_address_to_resource(np, 0, &res) == 0)
-			platform_device_register_simple("ds1511", 0, &res, 1);
-	}
-	return 0;
-}
-machine_arch_initcall(psr2_md, psr2_probe_devices);
-
-static void __init psr2_setup_arch(void)
-{
-	/* init to some ~sane value until calibrate_delay() runs */
-	loops_per_jiffy = 50000000;
-
-	scom_init_wsp();
-
-	/* Setup SMP callback */
-#ifdef CONFIG_SMP
-	a2_setup_smp();
-#endif
-#ifdef CONFIG_PCI
-	wsp_setup_pci();
-#endif
-
-}
-
 static int __init psr2_probe(void)
 {
 	unsigned long root = of_get_flat_dt_root();
 
+	if (of_flat_dt_is_compatible(root, "ibm,wsp-chroma")) {
+		/* chroma systems also claim they are psr2s */
+		return 0;
+	}
+
 	if (!of_flat_dt_is_compatible(root, "ibm,psr2"))
 		return 0;
 
 	return 1;
 }
 
-static void __init psr2_init_irq(void)
-{
-	wsp_init_irq();
-	opb_pic_init();
-}
-
 define_machine(psr2_md) {
 	.name			= "PSR2 A2",
 	.probe			= psr2_probe,
-	.setup_arch		= psr2_setup_arch,
+	.setup_arch		= wsp_setup_arch,
 	.restart		= psr2_restart,
 	.power_off		= psr2_spin,
 	.halt			= psr2_spin,
 	.calibrate_decr		= generic_calibrate_decr,
-	.init_IRQ		= psr2_init_irq,
+	.init_IRQ		= wsp_setup_irq,
 	.progress		= udbg_progress,
 	.power_save		= book3e_idle,
 };
+
+machine_arch_initcall(psr2_md, wsp_probe_devices);
diff --git a/arch/powerpc/platforms/wsp/wsp.c b/arch/powerpc/platforms/wsp/wsp.c
new file mode 100644
index 00000000000..d25cc96c21b
--- /dev/null
+++ b/arch/powerpc/platforms/wsp/wsp.c
@@ -0,0 +1,115 @@
+/*
+ * Copyright 2008-2011, IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/smp.h>
+#include <linux/delay.h>
+#include <linux/time.h>
+
+#include <asm/scom.h>
+
+#include "wsp.h"
+#include "ics.h"
+
+#define WSP_SOC_COMPATIBLE	"ibm,wsp-soc"
+#define PBIC_COMPATIBLE		"ibm,wsp-pbic"
+#define COPRO_COMPATIBLE	"ibm,wsp-coprocessor"
+
+static int __init wsp_probe_buses(void)
+{
+	static __initdata struct of_device_id bus_ids[] = {
+		/*
+		 * every node in between needs to be here or you won't
+		 * find it
+		 */
+		{ .compatible = WSP_SOC_COMPATIBLE, },
+		{ .compatible = PBIC_COMPATIBLE, },
+		{ .compatible = COPRO_COMPATIBLE, },
+		{},
+	};
+	of_platform_bus_probe(NULL, bus_ids, NULL);
+
+	return 0;
+}
+
+void __init wsp_setup_arch(void)
+{
+	/* init to some ~sane value until calibrate_delay() runs */
+	loops_per_jiffy = 50000000;
+
+	scom_init_wsp();
+
+	/* Setup SMP callback */
+#ifdef CONFIG_SMP
+	a2_setup_smp();
+#endif
+#ifdef CONFIG_PCI
+	wsp_setup_pci();
+#endif
+}
+
+void __init wsp_setup_irq(void)
+{
+	wsp_init_irq();
+	opb_pic_init();
+}
+
+
+int __init wsp_probe_devices(void)
+{
+	struct device_node *np;
+
+	/* Our RTC is a ds1500. It seems to be programatically compatible
+	 * with the ds1511 for which we have a driver so let's use that
+	 */
+	np = of_find_compatible_node(NULL, NULL, "dallas,ds1500");
+	if (np != NULL) {
+		struct resource res;
+		if (of_address_to_resource(np, 0, &res) == 0)
+			platform_device_register_simple("ds1511", 0, &res, 1);
+	}
+
+	wsp_probe_buses();
+
+	return 0;
+}
+
+void wsp_halt(void)
+{
+	u64 val;
+	scom_map_t m;
+	struct device_node *dn;
+	struct device_node *mine;
+	struct device_node *me;
+
+	me = of_get_cpu_node(smp_processor_id(), NULL);
+	mine = scom_find_parent(me);
+
+	/* This will halt all the A2s but not power off the chip */
+	for_each_node_with_property(dn, "scom-controller") {
+		if (dn == mine)
+			continue;
+		m = scom_map(dn, 0, 1);
+
+		/* read-modify-write it so the HW probe does not get
+		 * confused */
+		val = scom_read(m, 0);
+		val |= 1;
+		scom_write(m, 0, val);
+		scom_unmap(m);
+	}
+	m = scom_map(mine, 0, 1);
+	val = scom_read(m, 0);
+	val |= 1;
+	scom_write(m, 0, val);
+	/* should never return */
+	scom_unmap(m);
+}
diff --git a/arch/powerpc/platforms/wsp/wsp.h b/arch/powerpc/platforms/wsp/wsp.h
index 33479818f62..10c1d1fff36 100644
--- a/arch/powerpc/platforms/wsp/wsp.h
+++ b/arch/powerpc/platforms/wsp/wsp.h
@@ -6,15 +6,25 @@
 /* Devtree compatible strings for major devices */
 #define PCIE_COMPATIBLE     "ibm,wsp-pciex"
 
+extern void wsp_setup_arch(void);
+extern void wsp_setup_irq(void);
+extern int wsp_probe_devices(void);
+extern void wsp_halt(void);
+
 extern void wsp_setup_pci(void);
 extern void scom_init_wsp(void);
 
 extern void a2_setup_smp(void);
 extern int a2_scom_startup_cpu(unsigned int lcpu, int thr_idx,
 			       struct device_node *np);
-int smp_a2_cpu_bootable(unsigned int nr);
-int __devinit smp_a2_kick_cpu(int nr);
+extern int smp_a2_cpu_bootable(unsigned int nr);
+extern int __devinit smp_a2_kick_cpu(int nr);
+
+extern void opb_pic_init(void);
 
-void opb_pic_init(void);
+/* chroma specific managment */
+extern void wsp_h8_restart(char *cmd);
+extern void wsp_h8_power_off(void);
+extern void __init wsp_setup_h8(void);
 
 #endif /*  __WSP_H */