Merge git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc

* git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (36 commits)
  [POWERPC] Generic BUG for powerpc
  [PPC] Fix compile failure do to introduction of PHY_POLL
  [POWERPC] Only export __mtdcr/__mfdcr if CONFIG_PPC_DCR is set
  [POWERPC] Remove old dcr.S
  [POWERPC] Fix SPU coredump code for max_fdset removal
  [POWERPC] Fix irq routing on some 32-bit PowerMacs
  [POWERPC] ps3: Add vuart support
  [POWERPC] Support ibm,dynamic-reconfiguration-memory nodes
  [POWERPC] dont allow pSeries_probe to succeed without initialising MMU
  [POWERPC] micro optimise pSeries_probe
  [POWERPC] Add SPURR SPR to sysfs
  [POWERPC] Add DSCR SPR to sysfs
  [POWERPC] Fix 440SPe CPU table entry
  [POWERPC] Add support for FP emulation for the e300c2 core
  [POWERPC] of_device_register: propagate device_create_file return code
  [POWERPC] Fix mmap of PCI resource with hack for X
  [POWERPC] iSeries: head_64.o needs to depend on lparmap.s
  [POWERPC] cbe_thermal: Fix initialization of sysfs attribute_group
  [POWERPC] Remove QE header files from lite5200.c
  [POWERPC] of_platform_make_bus_id(): make `magic' int
  ...

13 files changed, 326 insertions, 231 deletions

diff --git a/arch/powerpc/platforms/52xx/lite5200.c b/arch/powerpc/platforms/52xx/lite5200.c
index a375c15b431..eaff71e74fb 100644
--- a/arch/powerpc/platforms/52xx/lite5200.c
+++ b/arch/powerpc/platforms/52xx/lite5200.c
@@ -40,8 +40,6 @@
 #include <asm/prom.h>
 #include <asm/udbg.h>
 #include <sysdev/fsl_soc.h>
-#include <asm/qe.h>
-#include <asm/qe_ic.h>
 #include <asm/of_platform.h>
 
 #include <asm/mpc52xx.h>
diff --git a/arch/powerpc/platforms/cell/cbe_thermal.c b/arch/powerpc/platforms/cell/cbe_thermal.c
index 616a0a3fd0e..70e0d968d30 100644
--- a/arch/powerpc/platforms/cell/cbe_thermal.c
+++ b/arch/powerpc/platforms/cell/cbe_thermal.c
@@ -115,6 +115,7 @@ static struct sysdev_attribute attr_spu_temperature = {
 
 static struct attribute *spu_attributes[] = {
 	&attr_spu_temperature.attr,
+	NULL,
 };
 
 static struct attribute_group spu_attribute_group = {
@@ -135,6 +136,7 @@ static struct sysdev_attribute attr_ppe_temperature1 = {
 static struct attribute *ppe_attributes[] = {
 	&attr_ppe_temperature0.attr,
 	&attr_ppe_temperature1.attr,
+	NULL,
 };
 
 static struct attribute_group ppe_attribute_group = {
diff --git a/arch/powerpc/platforms/cell/pmu.c b/arch/powerpc/platforms/cell/pmu.c
index 99c612025e8..d04ae1671e6 100644
--- a/arch/powerpc/platforms/cell/pmu.c
+++ b/arch/powerpc/platforms/cell/pmu.c
@@ -382,11 +382,14 @@ static irqreturn_t cbe_pm_irq(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-int __init cbe_init_pm_irq(void)
+static int __init cbe_init_pm_irq(void)
 {
 	unsigned int irq;
 	int rc, node;
 
+	if (!machine_is(cell))
+		return 0;
+
 	for_each_node(node) {
 		irq = irq_create_mapping(NULL, IIC_IRQ_IOEX_PMI |
 					       (node << IIC_IRQ_NODE_SHIFT));
diff --git a/arch/powerpc/platforms/cell/spufs/coredump.c b/arch/powerpc/platforms/cell/spufs/coredump.c
index 26945c491f6..725e1956115 100644
--- a/arch/powerpc/platforms/cell/spufs/coredump.c
+++ b/arch/powerpc/platforms/cell/spufs/coredump.c
@@ -147,7 +147,7 @@ static int spufs_arch_notes_size(void)
 	struct fdtable *fdt = files_fdtable(current->files);
 	int size = 0, fd;
 
-	for (fd = 0; fd < fdt->max_fdset && fd < fdt->max_fds; fd++) {
+	for (fd = 0; fd < fdt->max_fds; fd++) {
 		if (FD_ISSET(fd, fdt->open_fds)) {
 			struct file *file = fcheck(fd);
 
diff --git a/arch/powerpc/platforms/maple/pci.c b/arch/powerpc/platforms/maple/pci.c
index 3a32deda765..3f6a69f6719 100644
--- a/arch/powerpc/platforms/maple/pci.c
+++ b/arch/powerpc/platforms/maple/pci.c
@@ -562,7 +562,7 @@ void __init maple_pci_init(void)
 	for (np = NULL; (np = of_get_next_child(root, np)) != NULL;) {
 		if (np->name == NULL)
 			continue;
-		if (strcmp(np->name, "pci") == 0) {
+		if (!strcmp(np->name, "pci") || !strcmp(np->name, "pcie")) {
 			if (add_bridge(np) == 0)
 				of_node_get(np);
 		}
diff --git a/arch/powerpc/platforms/maple/setup.c b/arch/powerpc/platforms/maple/setup.c
index 094989d50ba..f12d5c69e74 100644
--- a/arch/powerpc/platforms/maple/setup.c
+++ b/arch/powerpc/platforms/maple/setup.c
@@ -60,6 +60,7 @@
 #include <asm/of_device.h>
 #include <asm/lmb.h>
 #include <asm/mpic.h>
+#include <asm/rtas.h>
 #include <asm/udbg.h>
 
 #include "maple.h"
@@ -166,6 +167,16 @@ struct smp_ops_t maple_smp_ops = {
 };
 #endif /* CONFIG_SMP */
 
+static void __init maple_use_rtas_reboot_and_halt_if_present(void)
+{
+	if (rtas_service_present("system-reboot") &&
+	    rtas_service_present("power-off")) {
+		ppc_md.restart = rtas_restart;
+		ppc_md.power_off = rtas_power_off;
+		ppc_md.halt = rtas_halt;
+	}
+}
+
 void __init maple_setup_arch(void)
 {
 	/* init to some ~sane value until calibrate_delay() runs */
@@ -181,6 +192,7 @@ void __init maple_setup_arch(void)
 #ifdef CONFIG_DUMMY_CONSOLE
 	conswitchp = &dummy_con;
 #endif
+	maple_use_rtas_reboot_and_halt_if_present();
 
 	printk(KERN_DEBUG "Using native/NAP idle loop\n");
 }
diff --git a/arch/powerpc/platforms/ps3/Kconfig b/arch/powerpc/platforms/ps3/Kconfig
index 451bfcd5502..de52ec4e9e5 100644
--- a/arch/powerpc/platforms/ps3/Kconfig
+++ b/arch/powerpc/platforms/ps3/Kconfig
@@ -40,4 +40,15 @@ config PS3_USE_LPAR_ADDR
 
 	  If you have any doubt, choose the default y.
 
+config PS3_VUART
+	depends on PPC_PS3
+	bool "PS3 Virtual UART support"
+	default y
+	help
+	  Include support for the PS3 Virtual UART.
+
+	  This support is required for several system services
+	  including the System Manager and AV Settings.  In
+	  general, all users will say Y.
+
 endmenu
diff --git a/arch/powerpc/platforms/pseries/Makefile b/arch/powerpc/platforms/pseries/Makefile
index 997243a91be..69590fbf83d 100644
--- a/arch/powerpc/platforms/pseries/Makefile
+++ b/arch/powerpc/platforms/pseries/Makefile
@@ -10,6 +10,8 @@ obj-$(CONFIG_XICS)	+= xics.o
 obj-$(CONFIG_SCANLOG)	+= scanlog.o
 obj-$(CONFIG_EEH)	+= eeh.o eeh_cache.o eeh_driver.o eeh_event.o
 
+obj-$(CONFIG_HOTPLUG_CPU)	+= hotplug-cpu.o
+
 obj-$(CONFIG_HVC_CONSOLE)	+= hvconsole.o
 obj-$(CONFIG_HVCS)		+= hvcserver.o
 obj-$(CONFIG_HCALL_STATS)	+= hvCall_inst.o
diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c
index 3c2d63ebf78..da6e5362e7c 100644
--- a/arch/powerpc/platforms/pseries/eeh.c
+++ b/arch/powerpc/platforms/pseries/eeh.c
@@ -337,6 +337,7 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev)
 			printk (KERN_ERR "EEH: Device driver ignored %d bad reads, panicing\n",
 			        pdn->eeh_check_count);
 			dump_stack();
+			msleep(5000);
 			
 			/* re-read the slot reset state */
 			if (read_slot_reset_state(pdn, rets) != 0)
diff --git a/arch/powerpc/platforms/pseries/eeh_driver.c b/arch/powerpc/platforms/pseries/eeh_driver.c
index c2bc9904f1c..cbd6b0711ab 100644
--- a/arch/powerpc/platforms/pseries/eeh_driver.c
+++ b/arch/powerpc/platforms/pseries/eeh_driver.c
@@ -170,14 +170,19 @@ static void eeh_report_reset(struct pci_dev *dev, void *userdata)
 static void eeh_report_resume(struct pci_dev *dev, void *userdata)
 {
 	struct pci_driver *driver = dev->driver;
+	struct device_node *dn = pci_device_to_OF_node(dev);
 
 	dev->error_state = pci_channel_io_normal;
 
 	if (!driver)
 		return;
-	if (!driver->err_handler)
-		return;
-	if (!driver->err_handler->resume)
+
+	if ((PCI_DN(dn)->eeh_mode) & EEH_MODE_IRQ_DISABLED) {
+		PCI_DN(dn)->eeh_mode &= ~EEH_MODE_IRQ_DISABLED;
+		enable_irq(dev->irq);
+	}
+	if (!driver->err_handler ||
+	    !driver->err_handler->resume)
 		return;
 
 	driver->err_handler->resume(dev);
@@ -407,6 +412,8 @@ struct pci_dn * handle_eeh_events (struct eeh_event *event)
 
 		if (rc)
 			result = PCI_ERS_RESULT_NEED_RESET;
+		else
+			result = PCI_ERS_RESULT_RECOVERED;
 	}
 
 	/* If any device has a hard failure, then shut off everything. */
diff --git a/arch/powerpc/platforms/pseries/hotplug-cpu.c b/arch/powerpc/platforms/pseries/hotplug-cpu.c
new file mode 100644
index 00000000000..f460b9cbfd4
--- /dev/null
+++ b/arch/powerpc/platforms/pseries/hotplug-cpu.c
@@ -0,0 +1,275 @@
+/*
+ * pseries CPU Hotplug infrastructure.
+ *
+ * Split out from arch/powerpc/platforms/pseries/setup.c
+ *  arch/powerpc/kernel/rtas.c, and arch/powerpc/platforms/pseries/smp.c
+ *
+ * Peter Bergner, IBM	March 2001.
+ * Copyright (C) 2001 IBM.
+ * Dave Engebretsen, Peter Bergner, and
+ * Mike Corrigan {engebret|bergner|mikec}@us.ibm.com
+ * Plus various changes from other IBM teams...
+ *
+ * Copyright (C) 2006 Michael Ellerman, IBM Corporation
+ *
+ *      This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License
+ *      as published by the Free Software Foundation; either version
+ *      2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/cpu.h>
+#include <asm/system.h>
+#include <asm/prom.h>
+#include <asm/rtas.h>
+#include <asm/firmware.h>
+#include <asm/machdep.h>
+#include <asm/vdso_datapage.h>
+#include <asm/pSeries_reconfig.h>
+#include "xics.h"
+
+/* This version can't take the spinlock, because it never returns */
+static struct rtas_args rtas_stop_self_args = {
+	.token = RTAS_UNKNOWN_SERVICE,
+	.nargs = 0,
+	.nret = 1,
+	.rets = &rtas_stop_self_args.args[0],
+};
+
+static void rtas_stop_self(void)
+{
+	struct rtas_args *args = &rtas_stop_self_args;
+
+	local_irq_disable();
+
+	BUG_ON(args->token == RTAS_UNKNOWN_SERVICE);
+
+	printk("cpu %u (hwid %u) Ready to die...\n",
+	       smp_processor_id(), hard_smp_processor_id());
+	enter_rtas(__pa(args));
+
+	panic("Alas, I survived.\n");
+}
+
+static void pseries_mach_cpu_die(void)
+{
+	local_irq_disable();
+	idle_task_exit();
+	xics_teardown_cpu(0);
+	rtas_stop_self();
+	/* Should never get here... */
+	BUG();
+	for(;;);
+}
+
+static int qcss_tok;	/* query-cpu-stopped-state token */
+
+/* Get state of physical CPU.
+ * Return codes:
+ *	0	- The processor is in the RTAS stopped state
+ *	1	- stop-self is in progress
+ *	2	- The processor is not in the RTAS stopped state
+ *	-1	- Hardware Error
+ *	-2	- Hardware Busy, Try again later.
+ */
+static int query_cpu_stopped(unsigned int pcpu)
+{
+	int cpu_status, status;
+
+	status = rtas_call(qcss_tok, 1, 2, &cpu_status, pcpu);
+	if (status != 0) {
+		printk(KERN_ERR
+		       "RTAS query-cpu-stopped-state failed: %i\n", status);
+		return status;
+	}
+
+	return cpu_status;
+}
+
+static int pseries_cpu_disable(void)
+{
+	int cpu = smp_processor_id();
+
+	cpu_clear(cpu, cpu_online_map);
+	vdso_data->processorCount--;
+
+	/*fix boot_cpuid here*/
+	if (cpu == boot_cpuid)
+		boot_cpuid = any_online_cpu(cpu_online_map);
+
+	/* FIXME: abstract this to not be platform specific later on */
+	xics_migrate_irqs_away();
+	return 0;
+}
+
+static void pseries_cpu_die(unsigned int cpu)
+{
+	int tries;
+	int cpu_status;
+	unsigned int pcpu = get_hard_smp_processor_id(cpu);
+
+	for (tries = 0; tries < 25; tries++) {
+		cpu_status = query_cpu_stopped(pcpu);
+		if (cpu_status == 0 || cpu_status == -1)
+			break;
+		msleep(200);
+	}
+	if (cpu_status != 0) {
+		printk("Querying DEAD? cpu %i (%i) shows %i\n",
+		       cpu, pcpu, cpu_status);
+	}
+
+	/* Isolation and deallocation are definatly done by
+	 * drslot_chrp_cpu.  If they were not they would be
+	 * done here.  Change isolate state to Isolate and
+	 * change allocation-state to Unusable.
+	 */
+	paca[cpu].cpu_start = 0;
+}
+
+/*
+ * Update cpu_present_map and paca(s) for a new cpu node.  The wrinkle
+ * here is that a cpu device node may represent up to two logical cpus
+ * in the SMT case.  We must honor the assumption in other code that
+ * the logical ids for sibling SMT threads x and y are adjacent, such
+ * that x^1 == y and y^1 == x.
+ */
+static int pseries_add_processor(struct device_node *np)
+{
+	unsigned int cpu;
+	cpumask_t candidate_map, tmp = CPU_MASK_NONE;
+	int err = -ENOSPC, len, nthreads, i;
+	const u32 *intserv;
+
+	intserv = get_property(np, "ibm,ppc-interrupt-server#s", &len);
+	if (!intserv)
+		return 0;
+
+	nthreads = len / sizeof(u32);
+	for (i = 0; i < nthreads; i++)
+		cpu_set(i, tmp);
+
+	lock_cpu_hotplug();
+
+	BUG_ON(!cpus_subset(cpu_present_map, cpu_possible_map));
+
+	/* Get a bitmap of unoccupied slots. */
+	cpus_xor(candidate_map, cpu_possible_map, cpu_present_map);
+	if (cpus_empty(candidate_map)) {
+		/* If we get here, it most likely means that NR_CPUS is
+		 * less than the partition's max processors setting.
+		 */
+		printk(KERN_ERR "Cannot add cpu %s; this system configuration"
+		       " supports %d logical cpus.\n", np->full_name,
+		       cpus_weight(cpu_possible_map));
+		goto out_unlock;
+	}
+
+	while (!cpus_empty(tmp))
+		if (cpus_subset(tmp, candidate_map))
+			/* Found a range where we can insert the new cpu(s) */
+			break;
+		else
+			cpus_shift_left(tmp, tmp, nthreads);
+
+	if (cpus_empty(tmp)) {
+		printk(KERN_ERR "Unable to find space in cpu_present_map for"
+		       " processor %s with %d thread(s)\n", np->name,
+		       nthreads);
+		goto out_unlock;
+	}
+
+	for_each_cpu_mask(cpu, tmp) {
+		BUG_ON(cpu_isset(cpu, cpu_present_map));
+		cpu_set(cpu, cpu_present_map);
+		set_hard_smp_processor_id(cpu, *intserv++);
+	}
+	err = 0;
+out_unlock:
+	unlock_cpu_hotplug();
+	return err;
+}
+
+/*
+ * Update the present map for a cpu node which is going away, and set
+ * the hard id in the paca(s) to -1 to be consistent with boot time
+ * convention for non-present cpus.
+ */
+static void pseries_remove_processor(struct device_node *np)
+{
+	unsigned int cpu;
+	int len, nthreads, i;
+	const u32 *intserv;
+
+	intserv = get_property(np, "ibm,ppc-interrupt-server#s", &len);
+	if (!intserv)
+		return;
+
+	nthreads = len / sizeof(u32);
+
+	lock_cpu_hotplug();
+	for (i = 0; i < nthreads; i++) {
+		for_each_present_cpu(cpu) {
+			if (get_hard_smp_processor_id(cpu) != intserv[i])
+				continue;
+			BUG_ON(cpu_online(cpu));
+			cpu_clear(cpu, cpu_present_map);
+			set_hard_smp_processor_id(cpu, -1);
+			break;
+		}
+		if (cpu == NR_CPUS)
+			printk(KERN_WARNING "Could not find cpu to remove "
+			       "with physical id 0x%x\n", intserv[i]);
+	}
+	unlock_cpu_hotplug();
+}
+
+static int pseries_smp_notifier(struct notifier_block *nb,
+				unsigned long action, void *node)
+{
+	int err = NOTIFY_OK;
+
+	switch (action) {
+	case PSERIES_RECONFIG_ADD:
+		if (pseries_add_processor(node))
+			err = NOTIFY_BAD;
+		break;
+	case PSERIES_RECONFIG_REMOVE:
+		pseries_remove_processor(node);
+		break;
+	default:
+		err = NOTIFY_DONE;
+		break;
+	}
+	return err;
+}
+
+static struct notifier_block pseries_smp_nb = {
+	.notifier_call = pseries_smp_notifier,
+};
+
+static int __init pseries_cpu_hotplug_init(void)
+{
+	rtas_stop_self_args.token = rtas_token("stop-self");
+	qcss_tok = rtas_token("query-cpu-stopped-state");
+
+	if (rtas_stop_self_args.token == RTAS_UNKNOWN_SERVICE ||
+			qcss_tok == RTAS_UNKNOWN_SERVICE) {
+		printk(KERN_INFO "CPU Hotplug not supported by firmware "
+				"- disabling.\n");
+		return 0;
+	}
+
+	ppc_md.cpu_die = pseries_mach_cpu_die;
+	smp_ops->cpu_disable = pseries_cpu_disable;
+	smp_ops->cpu_die = pseries_cpu_die;
+
+	/* Processors can be added/removed only on LPAR */
+	if (firmware_has_feature(FW_FEATURE_LPAR))
+		pSeries_reconfig_notifier_register(&pseries_smp_nb);
+
+	return 0;
+}
+arch_initcall(pseries_cpu_hotplug_init);
diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index 0dc2548ca9b..042ecae107a 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -347,21 +347,6 @@ static int __init pSeries_init_panel(void)
 }
 arch_initcall(pSeries_init_panel);
 
-#ifdef CONFIG_HOTPLUG_CPU
-static void pSeries_mach_cpu_die(void)
-{
-	local_irq_disable();
-	idle_task_exit();
-	xics_teardown_cpu(0);
-	rtas_stop_self();
-	/* Should never get here... */
-	BUG();
-	for(;;);
-}
-#else
-#define pSeries_mach_cpu_die NULL
-#endif
-
 static int pseries_set_dabr(unsigned long dabr)
 {
 	return plpar_hcall_norets(H_SET_DABR, dabr);
@@ -437,19 +422,14 @@ static int __init pSeries_probe_hypertas(unsigned long node,
 	if (of_get_flat_dt_prop(node, "ibm,hypertas-functions", NULL) != NULL)
  		powerpc_firmware_features |= FW_FEATURE_LPAR;
 
-	if (firmware_has_feature(FW_FEATURE_LPAR))
-		hpte_init_lpar();
-	else
-		hpte_init_native();
-
  	return 1;
 }
 
 static int __init pSeries_probe(void)
 {
 	unsigned long root = of_get_flat_dt_root();
- 	char *dtype = of_get_flat_dt_prop(of_get_flat_dt_root(),
- 					  "device_type", NULL);
+ 	char *dtype = of_get_flat_dt_prop(root, "device_type", NULL);
+
  	if (dtype == NULL)
  		return 0;
  	if (strcmp(dtype, "chrp"))
@@ -467,6 +447,11 @@ static int __init pSeries_probe(void)
 	/* Now try to figure out if we are running on LPAR */
 	of_scan_flat_dt(pSeries_probe_hypertas, NULL);
 
+	if (firmware_has_feature(FW_FEATURE_LPAR))
+		hpte_init_lpar();
+	else
+		hpte_init_native();
+
 	DBG("Machine is%s LPAR !\n",
 	    (powerpc_firmware_features & FW_FEATURE_LPAR) ? "" : " not");
 
@@ -561,7 +546,6 @@ define_machine(pseries) {
 	.power_off		= rtas_power_off,
 	.halt			= rtas_halt,
 	.panic			= rtas_os_term,
-	.cpu_die		= pSeries_mach_cpu_die,
 	.get_boot_time		= rtas_get_boot_time,
 	.get_rtc_time		= rtas_get_rtc_time,
 	.set_rtc_time		= rtas_set_rtc_time,
diff --git a/arch/powerpc/platforms/pseries/smp.c b/arch/powerpc/platforms/pseries/smp.c
index c6624b8a0e7..4408518eaeb 100644
--- a/arch/powerpc/platforms/pseries/smp.c
+++ b/arch/powerpc/platforms/pseries/smp.c
@@ -64,197 +64,6 @@ static cpumask_t of_spin_map;
 
 extern void generic_secondary_smp_init(unsigned long);
 
-#ifdef CONFIG_HOTPLUG_CPU
-
-/* Get state of physical CPU.
- * Return codes:
- *	0	- The processor is in the RTAS stopped state
- *	1	- stop-self is in progress
- *	2	- The processor is not in the RTAS stopped state
- *	-1	- Hardware Error
- *	-2	- Hardware Busy, Try again later.
- */
-static int query_cpu_stopped(unsigned int pcpu)
-{
-	int cpu_status;
-	int status, qcss_tok;
-
-	qcss_tok = rtas_token("query-cpu-stopped-state");
-	if (qcss_tok == RTAS_UNKNOWN_SERVICE)
-		return -1;
-	status = rtas_call(qcss_tok, 1, 2, &cpu_status, pcpu);
-	if (status != 0) {
-		printk(KERN_ERR
-		       "RTAS query-cpu-stopped-state failed: %i\n", status);
-		return status;
-	}
-
-	return cpu_status;
-}
-
-static int pSeries_cpu_disable(void)
-{
-	int cpu = smp_processor_id();
-
-	cpu_clear(cpu, cpu_online_map);
-	vdso_data->processorCount--;
-
-	/*fix boot_cpuid here*/
-	if (cpu == boot_cpuid)
-		boot_cpuid = any_online_cpu(cpu_online_map);
-
-	/* FIXME: abstract this to not be platform specific later on */
-	xics_migrate_irqs_away();
-	return 0;
-}
-
-static void pSeries_cpu_die(unsigned int cpu)
-{
-	int tries;
-	int cpu_status;
-	unsigned int pcpu = get_hard_smp_processor_id(cpu);
-
-	for (tries = 0; tries < 25; tries++) {
-		cpu_status = query_cpu_stopped(pcpu);
-		if (cpu_status == 0 || cpu_status == -1)
-			break;
-		msleep(200);
-	}
-	if (cpu_status != 0) {
-		printk("Querying DEAD? cpu %i (%i) shows %i\n",
-		       cpu, pcpu, cpu_status);
-	}
-
-	/* Isolation and deallocation are definatly done by
-	 * drslot_chrp_cpu.  If they were not they would be
-	 * done here.  Change isolate state to Isolate and
-	 * change allocation-state to Unusable.
-	 */
-	paca[cpu].cpu_start = 0;
-}
-
-/*
- * Update cpu_present_map and paca(s) for a new cpu node.  The wrinkle
- * here is that a cpu device node may represent up to two logical cpus
- * in the SMT case.  We must honor the assumption in other code that
- * the logical ids for sibling SMT threads x and y are adjacent, such
- * that x^1 == y and y^1 == x.
- */
-static int pSeries_add_processor(struct device_node *np)
-{
-	unsigned int cpu;
-	cpumask_t candidate_map, tmp = CPU_MASK_NONE;
-	int err = -ENOSPC, len, nthreads, i;
-	const u32 *intserv;
-
-	intserv = get_property(np, "ibm,ppc-interrupt-server#s", &len);
-	if (!intserv)
-		return 0;
-
-	nthreads = len / sizeof(u32);
-	for (i = 0; i < nthreads; i++)
-		cpu_set(i, tmp);
-
-	lock_cpu_hotplug();
-
-	BUG_ON(!cpus_subset(cpu_present_map, cpu_possible_map));
-
-	/* Get a bitmap of unoccupied slots. */
-	cpus_xor(candidate_map, cpu_possible_map, cpu_present_map);
-	if (cpus_empty(candidate_map)) {
-		/* If we get here, it most likely means that NR_CPUS is
-		 * less than the partition's max processors setting.
-		 */
-		printk(KERN_ERR "Cannot add cpu %s; this system configuration"
-		       " supports %d logical cpus.\n", np->full_name,
-		       cpus_weight(cpu_possible_map));
-		goto out_unlock;
-	}
-
-	while (!cpus_empty(tmp))
-		if (cpus_subset(tmp, candidate_map))
-			/* Found a range where we can insert the new cpu(s) */
-			break;
-		else
-			cpus_shift_left(tmp, tmp, nthreads);
-
-	if (cpus_empty(tmp)) {
-		printk(KERN_ERR "Unable to find space in cpu_present_map for"
-		       " processor %s with %d thread(s)\n", np->name,
-		       nthreads);
-		goto out_unlock;
-	}
-
-	for_each_cpu_mask(cpu, tmp) {
-		BUG_ON(cpu_isset(cpu, cpu_present_map));
-		cpu_set(cpu, cpu_present_map);
-		set_hard_smp_processor_id(cpu, *intserv++);
-	}
-	err = 0;
-out_unlock:
-	unlock_cpu_hotplug();
-	return err;
-}
-
-/*
- * Update the present map for a cpu node which is going away, and set
- * the hard id in the paca(s) to -1 to be consistent with boot time
- * convention for non-present cpus.
- */
-static void pSeries_remove_processor(struct device_node *np)
-{
-	unsigned int cpu;
-	int len, nthreads, i;
-	const u32 *intserv;
-
-	intserv = get_property(np, "ibm,ppc-interrupt-server#s", &len);
-	if (!intserv)
-		return;
-
-	nthreads = len / sizeof(u32);
-
-	lock_cpu_hotplug();
-	for (i = 0; i < nthreads; i++) {
-		for_each_present_cpu(cpu) {
-			if (get_hard_smp_processor_id(cpu) != intserv[i])
-				continue;
-			BUG_ON(cpu_online(cpu));
-			cpu_clear(cpu, cpu_present_map);
-			set_hard_smp_processor_id(cpu, -1);
-			break;
-		}
-		if (cpu == NR_CPUS)
-			printk(KERN_WARNING "Could not find cpu to remove "
-			       "with physical id 0x%x\n", intserv[i]);
-	}
-	unlock_cpu_hotplug();
-}
-
-static int pSeries_smp_notifier(struct notifier_block *nb, unsigned long action, void *node)
-{
-	int err = NOTIFY_OK;
-
-	switch (action) {
-	case PSERIES_RECONFIG_ADD:
-		if (pSeries_add_processor(node))
-			err = NOTIFY_BAD;
-		break;
-	case PSERIES_RECONFIG_REMOVE:
-		pSeries_remove_processor(node);
-		break;
-	default:
-		err = NOTIFY_DONE;
-		break;
-	}
-	return err;
-}
-
-static struct notifier_block pSeries_smp_nb = {
-	.notifier_call = pSeries_smp_notifier,
-};
-
-#endif /* CONFIG_HOTPLUG_CPU */
-
 /**
  * smp_startup_cpu() - start the given cpu
  *
@@ -422,15 +231,6 @@ static void __init smp_init_pseries(void)
 
 	DBG(" -> smp_init_pSeries()\n");
 
-#ifdef CONFIG_HOTPLUG_CPU
-	smp_ops->cpu_disable = pSeries_cpu_disable;
-	smp_ops->cpu_die = pSeries_cpu_die;
-
-	/* Processors can be added/removed only on LPAR */
-	if (firmware_has_feature(FW_FEATURE_LPAR))
-		pSeries_reconfig_notifier_register(&pSeries_smp_nb);
-#endif
-
 	/* Mark threads which are still spinning in hold loops. */
 	if (cpu_has_feature(CPU_FTR_SMT)) {
 		for_each_present_cpu(i) {