[POWERPC] qe: miscellaneous code improvements and fixes to the QE library

This patch makes numerous miscellaneous code improvements to the QE library.

1. Remove struct ucc_common and merge ucc_init_guemr() into ucc_set_type()
   (every caller of ucc_init_guemr() also calls ucc_set_type()).  Modify all
   callers of ucc_set_type() accordingly.

2. Remove the unused enum ucc_pram_initial_offset.

3. Refactor qe_setbrg(), also implement work-around for errata QE_General4.

4. Several printk() calls were missing the terminating \n.

5. Add __iomem where needed, and change u16 to __be16 and u32 to __be32 where
   appropriate.

6. In ucc_slow_init() the RBASE and TBASE registers in the PRAM were programmed
   with the wrong value.

7. Add the protocol type to struct us_info and updated ucc_slow_init() to
   use it, instead of always programming QE_CR_PROTOCOL_UNSPECIFIED.

8. Rename ucc_slow_restart_x() to ucc_slow_restart_tx()

9. Add several macros in qe.h (mostly for slow UCC support, but also to
   standardize some naming convention) and remove several unused macros.

10. Update ucc_geth.c to use the new macros.

11. Add ucc_slow_info.protocol to specify which QE_CR_PROTOCOL_xxx protcol
    to use when initializing the UCC in ucc_slow_init().

12. Rename ucc_slow_pram.rfcr to rbmr and ucc_slow_pram.tfcr to tbmr, since
    these are the real names of the registers.

13. Use the setbits, clrbits, and clrsetbits where appropriate.

14. Refactor ucc_set_qe_mux_rxtx().

15. Remove all instances of 'volatile'.

16. Simplify get_cmxucr_reg();

17. Replace qe_mux.cmxucrX with qe_mux.cmxucr[].

18. Updated struct ucc_geth because struct ucc_fast is not padded any more.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

1 files changed, 14 insertions, 21 deletions

diff --git a/arch/powerpc/sysdev/qe_lib/qe_io.c b/arch/powerpc/sysdev/qe_lib/qe_io.c
index e32b45bf9ff..a114cb0c572 100644
--- a/arch/powerpc/sysdev/qe_lib/qe_io.c
+++ b/arch/powerpc/sysdev/qe_lib/qe_io.c
@@ -195,29 +195,22 @@ EXPORT_SYMBOL(par_io_of_config);
 #ifdef DEBUG
 static void dump_par_io(void)
 {
-	int i;
+	unsigned int i;
 
-	printk(KERN_INFO "PAR IO registars:\n");
-	printk(KERN_INFO "Base address: 0x%08x\n", (u32) par_io);
+	printk(KERN_INFO "%s: par_io=%p\n", __FUNCTION__, par_io);
 	for (i = 0; i < num_par_io_ports; i++) {
-		printk(KERN_INFO "cpodr[%d] : addr - 0x%08x, val - 0x%08x\n",
-		       i, (u32) & par_io[i].cpodr,
-		       in_be32(&par_io[i].cpodr));
-		printk(KERN_INFO "cpdata[%d]: addr - 0x%08x, val - 0x%08x\n",
-		       i, (u32) & par_io[i].cpdata,
-		       in_be32(&par_io[i].cpdata));
-		printk(KERN_INFO "cpdir1[%d]: addr - 0x%08x, val - 0x%08x\n",
-		       i, (u32) & par_io[i].cpdir1,
-		       in_be32(&par_io[i].cpdir1));
-		printk(KERN_INFO "cpdir2[%d]: addr - 0x%08x, val - 0x%08x\n",
-		       i, (u32) & par_io[i].cpdir2,
-		       in_be32(&par_io[i].cpdir2));
-		printk(KERN_INFO "cppar1[%d]: addr - 0x%08x, val - 0x%08x\n",
-		       i, (u32) & par_io[i].cppar1,
-		       in_be32(&par_io[i].cppar1));
-		printk(KERN_INFO "cppar2[%d]: addr - 0x%08x, val - 0x%08x\n",
-		       i, (u32) & par_io[i].cppar2,
-		       in_be32(&par_io[i].cppar2));
+		printk(KERN_INFO "	cpodr[%u]=%08x\n", i,
+			in_be32(&par_io[i].cpodr));
+		printk(KERN_INFO "	cpdata[%u]=%08x\n", i,
+			in_be32(&par_io[i].cpdata));
+		printk(KERN_INFO "	cpdir1[%u]=%08x\n", i,
+			in_be32(&par_io[i].cpdir1));
+		printk(KERN_INFO "	cpdir2[%u]=%08x\n", i,
+			in_be32(&par_io[i].cpdir2));
+		printk(KERN_INFO "	cppar1[%u]=%08x\n", i,
+			in_be32(&par_io[i].cppar1));
+		printk(KERN_INFO "	cppar2[%u]=%08x\n", i,
+			in_be32(&par_io[i].cppar2));
 	}
 
 }