diff options
| author | Linus Torvalds <torvalds@g5.osdl.org> | 2005-11-04 16:27:50 -0800 |
|---|---|---|
| committer | Linus Torvalds <torvalds@g5.osdl.org> | 2005-11-04 16:27:50 -0800 |
| commit | 602d4a7e2f4b843d1a67375d4d7104073495b758 (patch) | |
| tree | 0b9f184e54fa693c27bd5986c114bdcf6949f788 /arch/powerpc | |
| parent | 0bbacc402e67abca8794a8401c1621dc0c0202e9 (diff) | |
| parent | c51e3a417bb0f295e13a5bad86302b5212eafdf3 (diff) | |
Merge master.kernel.org:/pub/scm/linux/kernel/git/paulus/powerpc-merge
Diffstat (limited to 'arch/powerpc')
80 files changed, 11657 insertions, 530 deletions
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 967ecf92d6a..f4e25c648fb 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -300,6 +300,7 @@ config PPC_PMAC64 bool depends on PPC_PMAC && POWER4 select U3_DART + select GENERIC_TBSYNC default y config PPC_PREP @@ -314,15 +315,17 @@ config PPC_MAPLE bool " Maple 970FX Evaluation Board" select U3_DART select MPIC_BROKEN_U3 + select GENERIC_TBSYNC default n help This option enables support for the Maple 970FX Evaluation Board. For more informations, refer to <http://www.970eval.com> -config PPC_BPA - bool " Broadband Processor Architecture" +config PPC_CELL + bool " Cell Broadband Processor Architecture" depends on PPC_MULTIPLATFORM && PPC64 select PPC_RTAS + select MMIO_NVRAM config PPC_OF bool @@ -353,13 +356,26 @@ config RTAS_ERROR_LOGGING depends on PPC_RTAS default n +config RTAS_PROC + bool "Proc interface to RTAS" + depends on PPC_RTAS + default y + +config RTAS_FLASH + tristate "Firmware flash interface" + depends on PPC64 && RTAS_PROC + +config MMIO_NVRAM + bool + default n + config MPIC_BROKEN_U3 bool depends on PPC_MAPLE default y -config BPA_IIC - depends on PPC_BPA +config CELL_IIC + depends on PPC_CELL bool default y @@ -372,6 +388,11 @@ config PPC_MPC106 bool default n +config GENERIC_TBSYNC + bool + default y if CONFIG_PPC32 && CONFIG_SMP + default n + source "drivers/cpufreq/Kconfig" config CPU_FREQ_PMAC diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile index 2f4cce06a7e..5bc11bd36c1 100644 --- a/arch/powerpc/Makefile +++ b/arch/powerpc/Makefile @@ -12,9 +12,6 @@ # Rewritten by Cort Dougan and Paul Mackerras # -# This must match PAGE_OFFSET in include/asm-powerpc/page.h. -KERNELLOAD := $(CONFIG_KERNEL_START) - HAS_BIARCH := $(call cc-option-yn, -m32) ifeq ($(CONFIG_PPC64),y) @@ -59,7 +56,7 @@ override LD += -m elf$(SZ)ppc override CC += -m$(SZ) endif -LDFLAGS_vmlinux := -Ttext $(KERNELLOAD) -Bstatic -e $(KERNELLOAD) +LDFLAGS_vmlinux := -Bstatic # The -Iarch/$(ARCH)/include is temporary while we are merging CPPFLAGS += -Iarch/$(ARCH) -Iarch/$(ARCH)/include diff --git a/arch/powerpc/configs/cell_defconfig b/arch/powerpc/configs/cell_defconfig new file mode 100644 index 00000000000..67ffecbc05c --- /dev/null +++ b/arch/powerpc/configs/cell_defconfig @@ -0,0 +1,1024 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.14-rc4 +# Thu Oct 20 08:29:10 2005 +# +CONFIG_64BIT=y +CONFIG_MMU=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_ISA_DMA=y +CONFIG_EARLY_PRINTK=y +CONFIG_COMPAT=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_FORCE_MAX_ZONEORDER=13 + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_CLEAN_COMPILE=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +CONFIG_HOTPLUG=y +CONFIG_KOBJECT_UEVENT=y +# CONFIG_IKCONFIG is not set +# CONFIG_CPUSETS is not set +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_EMBEDDED is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_OBSOLETE_MODPARM=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +# CONFIG_KMOD is not set +CONFIG_STOP_MACHINE=y +CONFIG_SYSVIPC_COMPAT=y + +# +# Platform support +# +# CONFIG_PPC_ISERIES is not set +CONFIG_PPC_MULTIPLATFORM=y +# CONFIG_PPC_PSERIES is not set +CONFIG_PPC_BPA=y +# CONFIG_PPC_PMAC is not set +# CONFIG_PPC_MAPLE is not set +CONFIG_PPC=y +CONFIG_PPC64=y +CONFIG_PPC_OF=y +CONFIG_BPA_IIC=y +CONFIG_ALTIVEC=y +CONFIG_KEXEC=y +# CONFIG_U3_DART is not set +# CONFIG_BOOTX_TEXT is not set +# CONFIG_POWER4_ONLY is not set +# CONFIG_IOMMU_VMERGE is not set +CONFIG_SMP=y +CONFIG_NR_CPUS=4 +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_NUMA is not set +CONFIG_SCHED_SMT=y +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_PREEMPT_BKL=y +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_GENERIC_HARDIRQS=y +CONFIG_PPC_RTAS=y +CONFIG_RTAS_PROC=y +CONFIG_RTAS_FLASH=y +CONFIG_SECCOMP=y +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +CONFIG_PROC_DEVICETREE=y +# CONFIG_CMDLINE_BOOL is not set +CONFIG_ISA_DMA_API=y + +# +# Bus Options +# +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +CONFIG_PCI_LEGACY_PROC=y +# CONFIG_PCI_DEBUG is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PCI Hotplug Support +# +# CONFIG_HOTPLUG_PCI is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +CONFIG_NET_IPIP=y +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +CONFIG_INET_TUNNEL=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y + +# +# IP: Virtual Server Configuration +# +# CONFIG_IP_VS is not set +CONFIG_IPV6=y +# CONFIG_IPV6_PRIVACY is not set +CONFIG_INET6_AH=m +CONFIG_INET6_ESP=m +CONFIG_INET6_IPCOMP=m +CONFIG_INET6_TUNNEL=m +CONFIG_IPV6_TUNNEL=m +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +# CONFIG_NETFILTER_NETLINK is not set + +# +# IP: Netfilter Configuration +# +CONFIG_IP_NF_CONNTRACK=y +# CONFIG_IP_NF_CT_ACCT is not set +# CONFIG_IP_NF_CONNTRACK_MARK is not set +# CONFIG_IP_NF_CONNTRACK_EVENTS is not set +CONFIG_IP_NF_CT_PROTO_SCTP=y +CONFIG_IP_NF_FTP=m +CONFIG_IP_NF_IRC=m +# CONFIG_IP_NF_NETBIOS_NS is not set +CONFIG_IP_NF_TFTP=m +CONFIG_IP_NF_AMANDA=m +# CONFIG_IP_NF_PPTP is not set +CONFIG_IP_NF_QUEUE=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_LIMIT=m +CONFIG_IP_NF_MATCH_IPRANGE=m +CONFIG_IP_NF_MATCH_MAC=m +CONFIG_IP_NF_MATCH_PKTTYPE=m +CONFIG_IP_NF_MATCH_MARK=m +CONFIG_IP_NF_MATCH_MULTIPORT=m +CONFIG_IP_NF_MATCH_TOS=m +CONFIG_IP_NF_MATCH_RECENT=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_DSCP=m +CONFIG_IP_NF_MATCH_AH_ESP=m +CONFIG_IP_NF_MATCH_LENGTH=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_MATCH_TCPMSS=m +CONFIG_IP_NF_MATCH_HELPER=m +CONFIG_IP_NF_MATCH_STATE=m +CONFIG_IP_NF_MATCH_CONNTRACK=m +CONFIG_IP_NF_MATCH_OWNER=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m +CONFIG_IP_NF_MATCH_REALM=m +CONFIG_IP_NF_MATCH_SCTP=m +# CONFIG_IP_NF_MATCH_DCCP is not set +CONFIG_IP_NF_MATCH_COMMENT=m +CONFIG_IP_NF_MATCH_HASHLIMIT=m +CONFIG_IP_NF_MATCH_STRING=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_LOG=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_IP_NF_TARGET_TCPMSS=m +CONFIG_IP_NF_TARGET_NFQUEUE=m +CONFIG_IP_NF_NAT=m +CONFIG_IP_NF_NAT_NEEDED=y +CONFIG_IP_NF_TARGET_MASQUERADE=m +CONFIG_IP_NF_TARGET_REDIRECT=m +CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_SAME=m +CONFIG_IP_NF_NAT_SNMP_BASIC=m +CONFIG_IP_NF_NAT_IRC=m +CONFIG_IP_NF_NAT_FTP=m +CONFIG_IP_NF_NAT_TFTP=m +CONFIG_IP_NF_NAT_AMANDA=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_TOS=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_DSCP=m +CONFIG_IP_NF_TARGET_MARK=m +CONFIG_IP_NF_TARGET_CLASSIFY=m +CONFIG_IP_NF_TARGET_TTL=m +CONFIG_IP_NF_RAW=m +CONFIG_IP_NF_TARGET_NOTRACK=m +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m + +# +# IPv6: Netfilter Configuration (EXPERIMENTAL) +# +# CONFIG_IP6_NF_QUEUE is not set +# CONFIG_IP6_NF_IPTABLES is not set +# CONFIG_IP6_NF_TARGET_NFQUEUE is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +CONFIG_NET_CLS_ROUTE=y + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_DEBUG_DRIVER is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +CONFIG_BLK_DEV_NBD=y +# CONFIG_BLK_DEV_SX8 is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=131072 +CONFIG_BLK_DEV_INITRD=y +# CONFIG_CDROM_PKTCDVD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +CONFIG_IDE=y +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=y +CONFIG_IDEDISK_MULTI_MODE=y +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_IDE_TASK_IOCTL is not set + +# +# IDE chipset support/bugfixes +# +CONFIG_IDE_GENERIC=y +CONFIG_BLK_DEV_IDEPCI=y +CONFIG_IDEPCI_SHARE_IRQ=y +# CONFIG_BLK_DEV_OFFBOARD is not set +CONFIG_BLK_DEV_GENERIC=y +# CONFIG_BLK_DEV_OPTI621 is not set +# CONFIG_BLK_DEV_SL82C105 is not set +CONFIG_BLK_DEV_IDEDMA_PCI=y +# CONFIG_BLK_DEV_IDEDMA_FORCED is not set +CONFIG_IDEDMA_PCI_AUTO=y +# CONFIG_IDEDMA_ONLYDISK is not set +CONFIG_BLK_DEV_AEC62XX=y +# CONFIG_BLK_DEV_ALI15X3 is not set +# CONFIG_BLK_DEV_AMD74XX is not set +# CONFIG_BLK_DEV_CMD64X is not set +# CONFIG_BLK_DEV_TRIFLEX is not set +# CONFIG_BLK_DEV_CY82C693 is not set +# CONFIG_BLK_DEV_CS5520 is not set +# CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_HPT34X is not set +# CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_SC1200 is not set +# CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT821X is not set +# CONFIG_BLK_DEV_NS87415 is not set +# CONFIG_BLK_DEV_PDC202XX_OLD is not set +# CONFIG_BLK_DEV_PDC202XX_NEW is not set +# CONFIG_BLK_DEV_SVWKS is not set +CONFIG_BLK_DEV_SIIMAGE=y +# CONFIG_BLK_DEV_SLC90E66 is not set +# CONFIG_BLK_DEV_TRM290 is not set +# CONFIG_BLK_DEV_VIA82CXXX is not set +# CONFIG_IDE_ARM is not set +CONFIG_BLK_DEV_IDEDMA=y +# CONFIG_IDEDMA_IVB is not set +CONFIG_IDEDMA_AUTO=y +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Macintosh device drivers +# + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# PHY device support +# +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set + +# +# Tulip family network device support +# +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +# CONFIG_NET_PCI is not set + +# +# Ethernet (1000 Mbit) +# +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +CONFIG_E1000=m +# CONFIG_E1000_NAPI is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +CONFIG_SKGE=m +# CONFIG_SK98LIN is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +# CONFIG_SPIDER_NET is not set +# CONFIG_MV643XX_ETH is not set + +# +# Ethernet (10000 Mbit) +# +# CONFIG_CHELSIO_T1 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set + +# +# Token Ring devices +# +# CONFIG_TR is not set + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_I8042 is not set +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_PCIPS2 is not set +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +CONFIG_SERIAL_NONSTANDARD=y +# CONFIG_ROCKETPORT is not set +# CONFIG_CYCLADES is not set +# CONFIG_DIGIEPCA is not set +# CONFIG_MOXA_SMARTIO is not set +# CONFIG_ISI is not set +# CONFIG_SYNCLINK is not set +# CONFIG_SYNCLINKMP is not set +# CONFIG_N_HDLC is not set +# CONFIG_SPECIALIX is not set +# CONFIG_SX is not set +# CONFIG_STALDRV is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_WATCHDOG_RTAS=y + +# +# PCI-based Watchdog Cards +# +# CONFIG_PCIPCWATCHDOG is not set +# CONFIG_WDTPCI is not set +# CONFIG_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_AGP is not set +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_HANGCHECK_TIMER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# +# I2C support +# +CONFIG_I2C=y +# CONFIG_I2C_CHARDEV is not set + +# +# I2C Algorithms +# +CONFIG_I2C_ALGOBIT=y +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_SCx200_ACB is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_ISA is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +# CONFIG_HWMON is not set +# CONFIG_HWMON_VID is not set + +# +# Misc devices +# + +# +# Multimedia Capabilities Port drivers +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +# CONFIG_FB is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB is not set + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# SN Devices +# + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=m +CONFIG_JOLIET=y +# CONFIG_ZISOFS is not set +CONFIG_UDF_FS=m +CONFIG_UDF_NLS=y + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +CONFIG_HUGETLBFS=y +CONFIG_HUGETLB_PAGE=y +CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=m +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +CONFIG_NFSD=m +CONFIG_NFSD_V2_ACL=y +CONFIG_NFSD_V3=y +CONFIG_NFSD_V3_ACL=y +# CONFIG_NFSD_V4 is not set +CONFIG_NFSD_TCP=y +CONFIG_LOCKD=m +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=m +CONFIG_NFS_ACL_SUPPORT=m +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=m +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +CONFIG_EFI_PARTITION=y + +# +# Native Language Support +# +CONFIG_NLS=m +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=m +CONFIG_NLS_ISO8859_2=m +CONFIG_NLS_ISO8859_3=m +CONFIG_NLS_ISO8859_4=m +CONFIG_NLS_ISO8859_5=m +CONFIG_NLS_ISO8859_6=m +CONFIG_NLS_ISO8859_7=m +CONFIG_NLS_ISO8859_9=m +CONFIG_NLS_ISO8859_13=m +CONFIG_NLS_ISO8859_14=m +CONFIG_NLS_ISO8859_15=m +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_DEBUG_KERNEL=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_LOG_BUF_SHIFT=15 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_SPINLOCK_SLEEP=y +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_INFO is not set +CONFIG_DEBUG_FS=y +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_KPROBES is not set +# CONFIG_DEBUG_STACK_USAGE is not set +CONFIG_DEBUGGER=y +# CONFIG_XMON is not set +# CONFIG_PPCDBG is not set +CONFIG_IRQSTACKS=y + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +CONFIG_CRYPTO_HMAC=y +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=m +CONFIG_CRYPTO_SHA1=m +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +CONFIG_CRYPTO_DES=m +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +CONFIG_CRYPTO_DEFLATE=m +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Hardware crypto devices +# + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=m +CONFIG_ZLIB_DEFLATE=m +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_TEXTSEARCH_BM=m +CONFIG_TEXTSEARCH_FSM=m diff --git a/arch/powerpc/configs/g5_defconfig b/arch/powerpc/configs/g5_defconfig new file mode 100644 index 00000000000..6323065fbf2 --- /dev/null +++ b/arch/powerpc/configs/g5_defconfig @@ -0,0 +1,1392 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.14-rc4 +# Thu Oct 20 08:30:23 2005 +# +CONFIG_64BIT=y +CONFIG_MMU=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_ISA_DMA=y +CONFIG_EARLY_PRINTK=y +CONFIG_COMPAT=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_FORCE_MAX_ZONEORDER=13 + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_CLEAN_COMPILE=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +CONFIG_HOTPLUG=y +CONFIG_KOBJECT_UEVENT=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +# CONFIG_CPUSETS is not set +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_EMBEDDED is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_OBSOLETE_MODPARM=y +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_KMOD=y +CONFIG_STOP_MACHINE=y +CONFIG_SYSVIPC_COMPAT=y + +# +# Platform support +# +# CONFIG_PPC_ISERIES is not set +CONFIG_PPC_MULTIPLATFORM=y +# CONFIG_PPC_PSERIES is not set +# CONFIG_PPC_BPA is not set +CONFIG_PPC_PMAC=y +# CONFIG_PPC_MAPLE is not set +CONFIG_PPC=y +CONFIG_PPC64=y +CONFIG_PPC_OF=y +CONFIG_MPIC=y +CONFIG_ALTIVEC=y +CONFIG_KEXEC=y +CONFIG_U3_DART=y +CONFIG_PPC_PMAC64=y +CONFIG_BOOTX_TEXT=y +CONFIG_POWER4_ONLY=y +CONFIG_IOMMU_VMERGE=y +CONFIG_SMP=y +CONFIG_NR_CPUS=2 +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_NUMA is not set +# CONFIG_SCHED_SMT is not set +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +# CONFIG_PREEMPT_BKL is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_GENERIC_HARDIRQS=y +CONFIG_SECCOMP=y +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +# CONFIG_HOTPLUG_CPU is not set +CONFIG_PROC_DEVICETREE=y +# CONFIG_CMDLINE_BOOL is not set +CONFIG_ISA_DMA_API=y + +# +# Bus Options +# +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +CONFIG_PCI_LEGACY_PROC=y +# CONFIG_PCI_DEBUG is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PCI Hotplug Support +# +# CONFIG_HOTPLUG_PCI is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +CONFIG_XFRM_USER=m +CONFIG_NET_KEY=m +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +CONFIG_NET_IPIP=y +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +CONFIG_INET_AH=m +CONFIG_INET_ESP=m +CONFIG_INET_IPCOMP=m +CONFIG_INET_TUNNEL=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y + +# +# IP: Virtual Server Configuration +# +# CONFIG_IP_VS is not set +# CONFIG_IPV6 is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +# CONFIG_NETFILTER_NETLINK is not set + +# +# IP: Netfilter Configuration +# +CONFIG_IP_NF_CONNTRACK=m +CONFIG_IP_NF_CT_ACCT=y +CONFIG_IP_NF_CONNTRACK_MARK=y +CONFIG_IP_NF_CONNTRACK_EVENTS=y +CONFIG_IP_NF_CT_PROTO_SCTP=m +CONFIG_IP_NF_FTP=m +CONFIG_IP_NF_IRC=m +# CONFIG_IP_NF_NETBIOS_NS is not set +CONFIG_IP_NF_TFTP=m +CONFIG_IP_NF_AMANDA=m +# CONFIG_IP_NF_PPTP is not set +CONFIG_IP_NF_QUEUE=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_LIMIT=m +CONFIG_IP_NF_MATCH_IPRANGE=m +CONFIG_IP_NF_MATCH_MAC=m +CONFIG_IP_NF_MATCH_PKTTYPE=m +CONFIG_IP_NF_MATCH_MARK=m +CONFIG_IP_NF_MATCH_MULTIPORT=m +CONFIG_IP_NF_MATCH_TOS=m +CONFIG_IP_NF_MATCH_RECENT=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_DSCP=m +CONFIG_IP_NF_MATCH_AH_ESP=m +CONFIG_IP_NF_MATCH_LENGTH=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_MATCH_TCPMSS=m +CONFIG_IP_NF_MATCH_HELPER=m +CONFIG_IP_NF_MATCH_STATE=m +CONFIG_IP_NF_MATCH_CONNTRACK=m +CONFIG_IP_NF_MATCH_OWNER=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m +CONFIG_IP_NF_MATCH_REALM=m +CONFIG_IP_NF_MATCH_SCTP=m +# CONFIG_IP_NF_MATCH_DCCP is not set +CONFIG_IP_NF_MATCH_COMMENT=m +CONFIG_IP_NF_MATCH_CONNMARK=m +CONFIG_IP_NF_MATCH_CONNBYTES=m +CONFIG_IP_NF_MATCH_HASHLIMIT=m +CONFIG_IP_NF_MATCH_STRING=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_LOG=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_IP_NF_TARGET_TCPMSS=m +CONFIG_IP_NF_TARGET_NFQUEUE=m +CONFIG_IP_NF_NAT=m +CONFIG_IP_NF_NAT_NEEDED=y +CONFIG_IP_NF_TARGET_MASQUERADE=m +CONFIG_IP_NF_TARGET_REDIRECT=m +CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_SAME=m +CONFIG_IP_NF_NAT_SNMP_BASIC=m +CONFIG_IP_NF_NAT_IRC=m +CONFIG_IP_NF_NAT_FTP=m +CONFIG_IP_NF_NAT_TFTP=m +CONFIG_IP_NF_NAT_AMANDA=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_TOS=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_DSCP=m +CONFIG_IP_NF_TARGET_MARK=m +CONFIG_IP_NF_TARGET_CLASSIFY=m +CONFIG_IP_NF_TARGET_TTL=m +CONFIG_IP_NF_TARGET_CONNMARK=m +CONFIG_IP_NF_TARGET_CLUSTERIP=m +CONFIG_IP_NF_RAW=m +CONFIG_IP_NF_TARGET_NOTRACK=m +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +CONFIG_LLC=y +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +CONFIG_NET_CLS_ROUTE=y + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_DEBUG_DRIVER is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +CONFIG_BLK_DEV_NBD=m +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=65536 +CONFIG_BLK_DEV_INITRD=y +CONFIG_CDROM_PKTCDVD=m +CONFIG_CDROM_PKTCDVD_BUFFERS=8 +# CONFIG_CDROM_PKTCDVD_WCACHE is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +CONFIG_IDE=y +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=y +# CONFIG_IDEDISK_MULTI_MODE is not set +CONFIG_BLK_DEV_IDECD=y +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_BLK_DEV_IDESCSI is not set +# CONFIG_IDE_TASK_IOCTL is not set + +# +# IDE chipset support/bugfixes +# +CONFIG_IDE_GENERIC=y +CONFIG_BLK_DEV_IDEPCI=y +# CONFIG_IDEPCI_SHARE_IRQ is not set +# CONFIG_BLK_DEV_OFFBOARD is not set +# CONFIG_BLK_DEV_GENERIC is not set +# CONFIG_BLK_DEV_OPTI621 is not set +# CONFIG_BLK_DEV_SL82C105 is not set +CONFIG_BLK_DEV_IDEDMA_PCI=y +# CONFIG_BLK_DEV_IDEDMA_FORCED is not set +CONFIG_IDEDMA_PCI_AUTO=y +# CONFIG_IDEDMA_ONLYDISK is not set +# CONFIG_BLK_DEV_AEC62XX is not set +# CONFIG_BLK_DEV_ALI15X3 is not set +# CONFIG_BLK_DEV_AMD74XX is not set +# CONFIG_BLK_DEV_CMD64X is not set +# CONFIG_BLK_DEV_TRIFLEX is not set +# CONFIG_BLK_DEV_CY82C693 is not set +# CONFIG_BLK_DEV_CS5520 is not set +# CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_HPT34X is not set +# CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_SC1200 is not set +# CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT821X is not set +# CONFIG_BLK_DEV_NS87415 is not set +# CONFIG_BLK_DEV_PDC202XX_OLD is not set +# CONFIG_BLK_DEV_PDC202XX_NEW is not set +# CONFIG_BLK_DEV_SVWKS is not set +# CONFIG_BLK_DEV_SIIMAGE is not set +# CONFIG_BLK_DEV_SLC90E66 is not set +# CONFIG_BLK_DEV_TRM290 is not set +# CONFIG_BLK_DEV_VIA82CXXX is not set +CONFIG_BLK_DEV_IDE_PMAC=y +CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y +CONFIG_BLK_DEV_IDEDMA_PMAC=y +# CONFIG_BLK_DEV_IDE_PMAC_BLINK is not set +# CONFIG_IDE_ARM is not set +CONFIG_BLK_DEV_IDEDMA=y +# CONFIG_IDEDMA_IVB is not set +CONFIG_IDEDMA_AUTO=y +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +CONFIG_CHR_DEV_ST=y +# CONFIG_CHR_DEV_OSST is not set +CONFIG_BLK_DEV_SR=y +CONFIG_BLK_DEV_SR_VENDOR=y +CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +CONFIG_SCSI_MULTI_LUN=y +CONFIG_SCSI_CONSTANTS=y +# CONFIG_SCSI_LOGGING is not set + +# +# SCSI Transport Attributes +# +CONFIG_SCSI_SPI_ATTRS=y +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set + +# +# SCSI low-level drivers +# +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +CONFIG_SCSI_SATA=y +# CONFIG_SCSI_SATA_AHCI is not set +CONFIG_SCSI_SATA_SVW=y +# CONFIG_SCSI_ATA_PIIX is not set +# CONFIG_SCSI_SATA_MV is not set +# CONFIG_SCSI_SATA_NV is not set +# CONFIG_SCSI_SATA_PROMISE is not set +# CONFIG_SCSI_SATA_QSTOR is not set +# CONFIG_SCSI_SATA_SX4 is not set +# CONFIG_SCSI_SATA_SIL is not set +# CONFIG_SCSI_SATA_SIS is not set +# CONFIG_SCSI_SATA_ULI is not set +# CONFIG_SCSI_SATA_VIA is not set +# CONFIG_SCSI_SATA_VITESSE is not set +# CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_EATA is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_GDTH is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_IPR is not set +# CONFIG_SCSI_QLOGIC_FC is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +CONFIG_SCSI_QLA2XXX=y +# CONFIG_SCSI_QLA21XX is not set +# CONFIG_SCSI_QLA22XX is not set +# CONFIG_SCSI_QLA2300 is not set +# CONFIG_SCSI_QLA2322 is not set +# CONFIG_SCSI_QLA6312 is not set +# CONFIG_SCSI_QLA24XX is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_DEBUG is not set + +# +# Multi-device support (RAID and LVM) +# +CONFIG_MD=y +CONFIG_BLK_DEV_MD=y +CONFIG_MD_LINEAR=y +CONFIG_MD_RAID0=y +CONFIG_MD_RAID1=y +CONFIG_MD_RAID10=m +CONFIG_MD_RAID5=y +CONFIG_MD_RAID6=m +CONFIG_MD_MULTIPATH=m +CONFIG_MD_FAULTY=m +CONFIG_BLK_DEV_DM=y +CONFIG_DM_CRYPT=m +CONFIG_DM_SNAPSHOT=m +CONFIG_DM_MIRROR=m +CONFIG_DM_ZERO=m +# CONFIG_DM_MULTIPATH is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set + +# +# IEEE 1394 (FireWire) support +# +CONFIG_IEEE1394=y + +# +# Subsystem Options +# +# CONFIG_IEEE1394_VERBOSEDEBUG is not set +CONFIG_IEEE1394_OUI_DB=y +CONFIG_IEEE1394_EXTRA_CONFIG_ROMS=y +CONFIG_IEEE1394_CONFIG_ROM_IP1394=y +# CONFIG_IEEE1394_EXPORT_FULL_API is not set + +# +# Device Drivers +# +# CONFIG_IEEE1394_PCILYNX is not set +CONFIG_IEEE1394_OHCI1394=y + +# +# Protocol Drivers +# +CONFIG_IEEE1394_VIDEO1394=m +CONFIG_IEEE1394_SBP2=m +# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set +CONFIG_IEEE1394_ETH1394=m +CONFIG_IEEE1394_DV1394=m +CONFIG_IEEE1394_RAWIO=y +# CONFIG_IEEE1394_CMP is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Macintosh device drivers +# +CONFIG_ADB_PMU=y +CONFIG_PMAC_SMU=y +CONFIG_THERM_PM72=y + +# +# Network device support +# +CONFIG_NETDEVICES=y +CONFIG_DUMMY=m +CONFIG_BONDING=m +# CONFIG_EQUALIZER is not set +CONFIG_TUN=m + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# PHY device support +# +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +CONFIG_SUNGEM=y +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set + +# +# Tulip family network device support +# +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +# CONFIG_NET_PCI is not set + +# +# Ethernet (1000 Mbit) +# +CONFIG_ACENIC=y +CONFIG_ACENIC_OMIT_TIGON_I=y +# CONFIG_DL2K is not set +CONFIG_E1000=y +# CONFIG_E1000_NAPI is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SK98LIN is not set +CONFIG_TIGON3=m +# CONFIG_BNX2 is not set +# CONFIG_MV643XX_ETH is not set + +# +# Ethernet (10000 Mbit) +# +# CONFIG_CHELSIO_T1 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set + +# +# Token Ring devices +# +CONFIG_TR=y +CONFIG_IBMOL=y +# CONFIG_3C359 is not set +# CONFIG_TMS380TR is not set + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +CONFIG_PPP=m +# CONFIG_PPP_MULTILINK is not set +# CONFIG_PPP_FILTER is not set +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +CONFIG_PPPOE=m +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +CONFIG_INPUT_JOYDEV=m +# CONFIG_INPUT_TSDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +CONFIG_INPUT_MOUSE=y +# CONFIG_MOUSE_PS2 is not set +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_I8042 is not set +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_PCIPS2 is not set +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_PMACZILOG is not set +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set + +# +# Ftape, the floppy tape device driver +# +CONFIG_AGP=m +CONFIG_AGP_UNINORTH=m +# CONFIG_DRM is not set +CONFIG_RAW_DRIVER=y +CONFIG_MAX_RAW_DEVS=256 +# CONFIG_HANGCHECK_TIMER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# +# I2C support +# +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +CONFIG_I2C_ALGOBIT=y +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set +CONFIG_I2C_KEYWEST=y +CONFIG_I2C_PMAC_SMU=y +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_SCx200_ACB is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_ISA is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +# CONFIG_HWMON is not set +# CONFIG_HWMON_VID is not set + +# +# Misc devices +# + +# +# Multimedia Capabilities Port drivers +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +CONFIG_FB=y +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +CONFIG_FB_SOFT_CURSOR=y +CONFIG_FB_MACMODES=y +CONFIG_FB_MODE_HELPERS=y +CONFIG_FB_TILEBLITTING=y +# CONFIG_FB_CIRRUS is not set +# CONFIG_FB_PM2 is not set +# CONFIG_FB_CYBER2000 is not set +CONFIG_FB_OF=y +# CONFIG_FB_CONTROL is not set +# CONFIG_FB_PLATINUM is not set +# CONFIG_FB_VALKYRIE is not set +# CONFIG_FB_CT65550 is not set +# CONFIG_FB_ASILIANT is not set +# CONFIG_FB_IMSTT is not set +# CONFIG_FB_VGA16 is not set +# CONFIG_FB_NVIDIA is not set +CONFIG_FB_RIVA=y +# CONFIG_FB_RIVA_I2C is not set +# CONFIG_FB_RIVA_DEBUG is not set +# CONFIG_FB_MATROX is not set +# CONFIG_FB_RADEON_OLD is not set +CONFIG_FB_RADEON=y +CONFIG_FB_RADEON_I2C=y +# CONFIG_FB_RADEON_DEBUG is not set +# CONFIG_FB_ATY128 is not set +# CONFIG_FB_ATY is not set +# CONFIG_FB_SAVAGE is not set +# CONFIG_FB_SIS is not set +# CONFIG_FB_NEOMAGIC is not set +# CONFIG_FB_KYRO is not set +# CONFIG_FB_3DFX is not set +# CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_CYBLA is not set +# CONFIG_FB_TRIDENT is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y + +# +# Logo configuration +# +CONFIG_LOGO=y +CONFIG_LOGO_LINUX_MONO=y +CONFIG_LOGO_LINUX_VGA16=y +CONFIG_LOGO_LINUX_CLUT224=y +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_BACKLIGHT_CLASS_DEVICE=m +CONFIG_BACKLIGHT_DEVICE=y +CONFIG_LCD_CLASS_DEVICE=m +CONFIG_LCD_DEVICE=y + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_BANDWIDTH is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +CONFIG_USB_EHCI_HCD=y +# CONFIG_USB_EHCI_SPLIT_ISO is not set +# CONFIG_USB_EHCI_ROOT_HUB_TT is not set +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_BLUETOOTH_TTY is not set +CONFIG_USB_ACM=m +CONFIG_USB_PRINTER=y + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +CONFIG_USB_STORAGE_DATAFAB=y +CONFIG_USB_STORAGE_FREECOM=y +CONFIG_USB_STORAGE_ISD200=y +CONFIG_USB_STORAGE_DPCM=y +# CONFIG_USB_STORAGE_USBAT is not set +CONFIG_USB_STORAGE_SDDR09=y +CONFIG_USB_STORAGE_SDDR55=y +CONFIG_USB_STORAGE_JUMPSHOT=y +# CONFIG_USB_STORAGE_ONETOUCH is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +CONFIG_USB_HIDINPUT=y +CONFIG_HID_FF=y +CONFIG_HID_PID=y +CONFIG_LOGITECH_FF=y +CONFIG_THRUSTMASTER_FF=y +CONFIG_USB_HIDDEV=y +# CONFIG_USB_AIPTEK is not set +# CONFIG_USB_WACOM is not set +# CONFIG_USB_ACECAD is not set +# CONFIG_USB_KBTAB is not set +# CONFIG_USB_POWERMATE is not set +# CONFIG_USB_MTOUCH is not set +# CONFIG_USB_ITMTOUCH is not set +# CONFIG_USB_EGALAX is not set +# CONFIG_USB_YEALINK is not set +# CONFIG_USB_XPAD is not set +# CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_APPLETOUCH is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB Multimedia devices +# +# CONFIG_USB_DABUSB is not set + +# +# Video4Linux support is needed for USB Multimedia device support +# + +# +# USB Network Adapters +# +CONFIG_USB_CATC=m +CONFIG_USB_KAWETH=m +CONFIG_USB_PEGASUS=m +CONFIG_USB_RTL8150=m +CONFIG_USB_USBNET=m +# CONFIG_USB_NET_AX8817X is not set +CONFIG_USB_NET_CDCETHER=m +# CONFIG_USB_NET_GL620A is not set +# CONFIG_USB_NET_NET1080 is not set +# CONFIG_USB_NET_PLUSB is not set +# CONFIG_USB_NET_RNDIS_HOST is not set +# CONFIG_USB_NET_CDC_SUBSET is not set +# CONFIG_USB_NET_ZAURUS is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +CONFIG_USB_SERIAL=m +CONFIG_USB_SERIAL_GENERIC=y +# CONFIG_USB_SERIAL_AIRPRIME is not set +CONFIG_USB_SERIAL_BELKIN=m +CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m +# CONFIG_USB_SERIAL_CP2101 is not set +CONFIG_USB_SERIAL_CYPRESS_M8=m +CONFIG_USB_SERIAL_EMPEG=m +CONFIG_USB_SERIAL_FTDI_SIO=m +CONFIG_USB_SERIAL_VISOR=m +CONFIG_USB_SERIAL_IPAQ=m +CONFIG_USB_SERIAL_IR=m +CONFIG_USB_SERIAL_EDGEPORT=m +CONFIG_USB_SERIAL_EDGEPORT_TI=m +CONFIG_USB_SERIAL_GARMIN=m +CONFIG_USB_SERIAL_IPW=m +CONFIG_USB_SERIAL_KEYSPAN_PDA=m +CONFIG_USB_SERIAL_KEYSPAN=m +CONFIG_USB_SERIAL_KEYSPAN_MPR=y +CONFIG_USB_SERIAL_KEYSPAN_USA28=y +CONFIG_USB_SERIAL_KEYSPAN_USA28X=y +CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y +CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y +CONFIG_USB_SERIAL_KEYSPAN_USA19=y +CONFIG_USB_SERIAL_KEYSPAN_USA18X=y +CONFIG_USB_SERIAL_KEYSPAN_USA19W=y +CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y +CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y +CONFIG_USB_SERIAL_KEYSPAN_USA49W=y +CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y +CONFIG_USB_SERIAL_KLSI=m +CONFIG_USB_SERIAL_KOBIL_SCT=m +CONFIG_USB_SERIAL_MCT_U232=m +CONFIG_USB_SERIAL_PL2303=m +# CONFIG_USB_SERIAL_HP4X is not set +CONFIG_USB_SERIAL_SAFE=m +CONFIG_USB_SERIAL_SAFE_PADDED=y +CONFIG_USB_SERIAL_TI=m +CONFIG_USB_SERIAL_CYBERJACK=m +CONFIG_USB_SERIAL_XIRCOM=m +CONFIG_USB_SERIAL_OMNINET=m +CONFIG_USB_EZUSB=y + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGETKIT is not set +# CONFIG_USB_PHIDGETSERVO is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# SN Devices +# + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +CONFIG_EXT2_FS_SECURITY=y +CONFIG_EXT2_FS_XIP=y +CONFIG_FS_XIP=y +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +CONFIG_EXT3_FS_POSIX_ACL=y +CONFIG_EXT3_FS_SECURITY=y +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +CONFIG_REISERFS_FS=y +# CONFIG_REISERFS_CHECK is not set +# CONFIG_REISERFS_PROC_INFO is not set +CONFIG_REISERFS_FS_XATTR=y +CONFIG_REISERFS_FS_POSIX_ACL=y +CONFIG_REISERFS_FS_SECURITY=y +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +CONFIG_XFS_FS=m +CONFIG_XFS_EXPORT=y +# CONFIG_XFS_QUOTA is not set +CONFIG_XFS_SECURITY=y +CONFIG_XFS_POSIX_ACL=y +# CONFIG_XFS_RT is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +CONFIG_AUTOFS_FS=m +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=y +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_ZISOFS_FS=y +CONFIG_UDF_FS=m +CONFIG_UDF_NLS=y + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +CONFIG_HUGETLBFS=y +CONFIG_HUGETLB_PAGE=y +CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +CONFIG_HFS_FS=m +CONFIG_HFSPLUS_FS=m +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +# CONFIG_NFS_DIRECTIO is not set +CONFIG_NFSD=y +CONFIG_NFSD_V2_ACL=y +CONFIG_NFSD_V3=y +CONFIG_NFSD_V3_ACL=y +CONFIG_NFSD_V4=y +CONFIG_NFSD_TCP=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=y +CONFIG_NFS_ACL_SUPPORT=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +CONFIG_CIFS=m +# CONFIG_CIFS_STATS is not set +# CONFIG_CIFS_XATTR is not set +# CONFIG_CIFS_EXPERIMENTAL is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +CONFIG_MAC_PARTITION=y +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_EFI_PARTITION is not set + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +CONFIG_NLS_CODEPAGE_1250=y +CONFIG_NLS_CODEPAGE_1251=y +CONFIG_NLS_ASCII=y +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +CONFIG_NLS_ISO8859_15=y +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=y + +# +# Profiling support +# +CONFIG_PROFILING=y +CONFIG_OPROFILE=y + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_DEBUG_KERNEL=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_LOG_BUF_SHIFT=17 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_INFO is not set +CONFIG_DEBUG_FS=y +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_KPROBES is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUGGER is not set +# CONFIG_PPCDBG is not set +CONFIG_IRQSTACKS=y + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_SHA1=m +CONFIG_CRYPTO_SHA256=m +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_WP512=m +# CONFIG_CRYPTO_TGR192 is not set +CONFIG_CRYPTO_DES=y +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_AES=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_KHAZAD=m +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_TEST=m + +# +# Hardware crypto devices +# + +# +# Library routines +# +CONFIG_CRC_CCITT=m +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +CONFIG_LIBCRC32C=m +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=m +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_TEXTSEARCH_BM=m +CONFIG_TEXTSEARCH_FSM=m diff --git a/arch/powerpc/configs/iseries_defconfig b/arch/powerpc/configs/iseries_defconfig new file mode 100644 index 00000000000..62e92c7e9e2 --- /dev/null +++ b/arch/powerpc/configs/iseries_defconfig @@ -0,0 +1,998 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.14-rc4 +# Thu Oct 20 08:30:56 2005 +# +CONFIG_64BIT=y +CONFIG_MMU=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_ISA_DMA=y +CONFIG_EARLY_PRINTK=y +CONFIG_COMPAT=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_FORCE_MAX_ZONEORDER=13 + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_CLEAN_COMPILE=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +CONFIG_AUDIT=y +CONFIG_AUDITSYSCALL=y +CONFIG_HOTPLUG=y +CONFIG_KOBJECT_UEVENT=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +# CONFIG_CPUSETS is not set +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_EMBEDDED is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_OBSOLETE_MODPARM=y +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_KMOD=y +CONFIG_STOP_MACHINE=y +CONFIG_SYSVIPC_COMPAT=y + +# +# Platform support +# +CONFIG_PPC_ISERIES=y +# CONFIG_PPC_MULTIPLATFORM is not set +CONFIG_PPC=y +CONFIG_PPC64=y +CONFIG_IBMVIO=y +# CONFIG_POWER4_ONLY is not set +CONFIG_IOMMU_VMERGE=y +CONFIG_SMP=y +CONFIG_NR_CPUS=32 +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_NUMA is not set +# CONFIG_SCHED_SMT is not set +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +# CONFIG_PREEMPT_BKL is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_GENERIC_HARDIRQS=y +CONFIG_LPARCFG=y +CONFIG_SECCOMP=y +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +CONFIG_ISA_DMA_API=y + +# +# Bus Options +# +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +CONFIG_PCI_LEGACY_PROC=y +# CONFIG_PCI_DEBUG is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PCI Hotplug Support +# +# CONFIG_HOTPLUG_PCI is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +CONFIG_XFRM_USER=m +CONFIG_NET_KEY=m +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +CONFIG_NET_IPIP=y +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +CONFIG_INET_AH=m +CONFIG_INET_ESP=m +CONFIG_INET_IPCOMP=m +CONFIG_INET_TUNNEL=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y + +# +# IP: Virtual Server Configuration +# +# CONFIG_IP_VS is not set +# CONFIG_IPV6 is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +# CONFIG_NETFILTER_NETLINK is not set + +# +# IP: Netfilter Configuration +# +CONFIG_IP_NF_CONNTRACK=m +CONFIG_IP_NF_CT_ACCT=y +CONFIG_IP_NF_CONNTRACK_MARK=y +CONFIG_IP_NF_CONNTRACK_EVENTS=y +CONFIG_IP_NF_CT_PROTO_SCTP=m +CONFIG_IP_NF_FTP=m +CONFIG_IP_NF_IRC=m +# CONFIG_IP_NF_NETBIOS_NS is not set +CONFIG_IP_NF_TFTP=m +CONFIG_IP_NF_AMANDA=m +# CONFIG_IP_NF_PPTP is not set +CONFIG_IP_NF_QUEUE=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_LIMIT=m +CONFIG_IP_NF_MATCH_IPRANGE=m +CONFIG_IP_NF_MATCH_MAC=m +CONFIG_IP_NF_MATCH_PKTTYPE=m +CONFIG_IP_NF_MATCH_MARK=m +CONFIG_IP_NF_MATCH_MULTIPORT=m +CONFIG_IP_NF_MATCH_TOS=m +CONFIG_IP_NF_MATCH_RECENT=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_DSCP=m +CONFIG_IP_NF_MATCH_AH_ESP=m +CONFIG_IP_NF_MATCH_LENGTH=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_MATCH_TCPMSS=m +CONFIG_IP_NF_MATCH_HELPER=m +CONFIG_IP_NF_MATCH_STATE=m +CONFIG_IP_NF_MATCH_CONNTRACK=m +CONFIG_IP_NF_MATCH_OWNER=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m +CONFIG_IP_NF_MATCH_REALM=m +CONFIG_IP_NF_MATCH_SCTP=m +# CONFIG_IP_NF_MATCH_DCCP is not set +CONFIG_IP_NF_MATCH_COMMENT=m +CONFIG_IP_NF_MATCH_CONNMARK=m +CONFIG_IP_NF_MATCH_CONNBYTES=m +CONFIG_IP_NF_MATCH_HASHLIMIT=m +CONFIG_IP_NF_MATCH_STRING=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_LOG=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_IP_NF_TARGET_TCPMSS=m +CONFIG_IP_NF_TARGET_NFQUEUE=m +CONFIG_IP_NF_NAT=m +CONFIG_IP_NF_NAT_NEEDED=y +CONFIG_IP_NF_TARGET_MASQUERADE=m +CONFIG_IP_NF_TARGET_REDIRECT=m +CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_SAME=m +CONFIG_IP_NF_NAT_SNMP_BASIC=m +CONFIG_IP_NF_NAT_IRC=m +CONFIG_IP_NF_NAT_FTP=m +CONFIG_IP_NF_NAT_TFTP=m +CONFIG_IP_NF_NAT_AMANDA=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_TOS=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_DSCP=m +CONFIG_IP_NF_TARGET_MARK=m +CONFIG_IP_NF_TARGET_CLASSIFY=m +CONFIG_IP_NF_TARGET_TTL=m +CONFIG_IP_NF_TARGET_CONNMARK=m +CONFIG_IP_NF_TARGET_CLUSTERIP=m +CONFIG_IP_NF_RAW=m +CONFIG_IP_NF_TARGET_NOTRACK=m +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +CONFIG_LLC=y +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +CONFIG_NET_CLS_ROUTE=y + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=m +# CONFIG_DEBUG_DRIVER is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +CONFIG_BLK_DEV_NBD=m +# CONFIG_BLK_DEV_SX8 is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=65536 +CONFIG_BLK_DEV_INITRD=y +# CONFIG_CDROM_PKTCDVD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +CONFIG_CHR_DEV_ST=y +# CONFIG_CHR_DEV_OSST is not set +CONFIG_BLK_DEV_SR=y +CONFIG_BLK_DEV_SR_VENDOR=y +CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +CONFIG_SCSI_MULTI_LUN=y +CONFIG_SCSI_CONSTANTS=y +# CONFIG_SCSI_LOGGING is not set + +# +# SCSI Transport Attributes +# +CONFIG_SCSI_SPI_ATTRS=y +CONFIG_SCSI_FC_ATTRS=y +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set + +# +# SCSI low-level drivers +# +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_SATA is not set +# CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_EATA is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_GDTH is not set +# CONFIG_SCSI_IPS is not set +CONFIG_SCSI_IBMVSCSI=m +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_IPR is not set +# CONFIG_SCSI_QLOGIC_FC is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +CONFIG_SCSI_QLA2XXX=y +# CONFIG_SCSI_QLA21XX is not set +# CONFIG_SCSI_QLA22XX is not set +# CONFIG_SCSI_QLA2300 is not set +# CONFIG_SCSI_QLA2322 is not set +# CONFIG_SCSI_QLA6312 is not set +# CONFIG_SCSI_QLA24XX is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_DEBUG is not set + +# +# Multi-device support (RAID and LVM) +# +CONFIG_MD=y +CONFIG_BLK_DEV_MD=y +CONFIG_MD_LINEAR=y +CONFIG_MD_RAID0=y +CONFIG_MD_RAID1=y +CONFIG_MD_RAID10=m +CONFIG_MD_RAID5=y +CONFIG_MD_RAID6=m +CONFIG_MD_MULTIPATH=m +CONFIG_MD_FAULTY=m +CONFIG_BLK_DEV_DM=y +CONFIG_DM_CRYPT=m +CONFIG_DM_SNAPSHOT=m +CONFIG_DM_MIRROR=m +CONFIG_DM_ZERO=m +# CONFIG_DM_MULTIPATH is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Macintosh device drivers +# + +# +# Network device support +# +CONFIG_NETDEVICES=y +CONFIG_DUMMY=m +CONFIG_BONDING=m +# CONFIG_EQUALIZER is not set +CONFIG_TUN=m + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# PHY device support +# +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set + +# +# Tulip family network device support +# +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +CONFIG_NET_PCI=y +CONFIG_PCNET32=y +# CONFIG_AMD8111_ETH is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_B44 is not set +# CONFIG_FORCEDETH is not set +# CONFIG_DGRS is not set +# CONFIG_EEPRO100 is not set +CONFIG_E100=y +# CONFIG_FEALNX is not set +# CONFIG_NATSEMI is not set +# CONFIG_NE2K_PCI is not set +# CONFIG_8139CP is not set +# CONFIG_8139TOO is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_VIA_RHINE is not set + +# +# Ethernet (1000 Mbit) +# +CONFIG_ACENIC=m +# CONFIG_ACENIC_OMIT_TIGON_I is not set +# CONFIG_DL2K is not set +CONFIG_E1000=m +# CONFIG_E1000_NAPI is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set + +# +# Ethernet (10000 Mbit) +# +# CONFIG_CHELSIO_T1 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set + +# +# Token Ring devices +# +CONFIG_TR=y +CONFIG_IBMOL=y +# CONFIG_3C359 is not set +# CONFIG_TMS380TR is not set + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +CONFIG_ISERIES_VETH=y +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +CONFIG_PPP=m +# CONFIG_PPP_MULTILINK is not set +# CONFIG_PPP_FILTER is not set +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +CONFIG_PPPOE=m +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_SHAPER is not set +CONFIG_NETCONSOLE=y +CONFIG_NETPOLL=y +CONFIG_NETPOLL_RX=y +CONFIG_NETPOLL_TRAP=y +CONFIG_NET_POLL_CONTROLLER=y + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=m +CONFIG_SERIAL_ICOM=m +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_AGP is not set +# CONFIG_DRM is not set +CONFIG_RAW_DRIVER=y +CONFIG_MAX_RAW_DEVS=256 +# CONFIG_HANGCHECK_TIMER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# +# I2C support +# +# CONFIG_I2C is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +# CONFIG_HWMON is not set +# CONFIG_HWMON_VID is not set + +# +# Misc devices +# + +# +# Multimedia Capabilities Port drivers +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +# CONFIG_FB is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB is not set + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# SN Devices +# + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +CONFIG_EXT2_FS_SECURITY=y +CONFIG_EXT2_FS_XIP=y +CONFIG_FS_XIP=y +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +CONFIG_EXT3_FS_POSIX_ACL=y +CONFIG_EXT3_FS_SECURITY=y +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +CONFIG_REISERFS_FS=y +# CONFIG_REISERFS_CHECK is not set +# CONFIG_REISERFS_PROC_INFO is not set +CONFIG_REISERFS_FS_XATTR=y +CONFIG_REISERFS_FS_POSIX_ACL=y +CONFIG_REISERFS_FS_SECURITY=y +CONFIG_JFS_FS=m +CONFIG_JFS_POSIX_ACL=y +CONFIG_JFS_SECURITY=y +# CONFIG_JFS_DEBUG is not set +# CONFIG_JFS_STATISTICS is not set +CONFIG_FS_POSIX_ACL=y +CONFIG_XFS_FS=m +CONFIG_XFS_EXPORT=y +# CONFIG_XFS_QUOTA is not set +CONFIG_XFS_SECURITY=y +CONFIG_XFS_POSIX_ACL=y +# CONFIG_XFS_RT is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +CONFIG_AUTOFS_FS=m +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=y +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_ZISOFS_FS=y +CONFIG_UDF_FS=m +CONFIG_UDF_NLS=y + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_HUGETLBFS is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +# CONFIG_NFS_DIRECTIO is not set +CONFIG_NFSD=m +CONFIG_NFSD_V2_ACL=y +CONFIG_NFSD_V3=y +CONFIG_NFSD_V3_ACL=y +CONFIG_NFSD_V4=y +CONFIG_NFSD_TCP=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=m +CONFIG_NFS_ACL_SUPPORT=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y +CONFIG_RPCSEC_GSS_SPKM3=m +# CONFIG_SMB_FS is not set +CONFIG_CIFS=m +# CONFIG_CIFS_STATS is not set +CONFIG_CIFS_XATTR=y +CONFIG_CIFS_POSIX=y +# CONFIG_CIFS_EXPERIMENTAL is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +CONFIG_NLS_ASCII=y +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# iSeries device drivers +# +CONFIG_VIOCONS=y +CONFIG_VIODASD=y +CONFIG_VIOCD=m +CONFIG_VIOTAPE=m +CONFIG_VIOPATH=y + +# +# Profiling support +# +CONFIG_PROFILING=y +CONFIG_OPROFILE=y + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_DEBUG_KERNEL=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_LOG_BUF_SHIFT=17 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_INFO is not set +CONFIG_DEBUG_FS=y +CONFIG_DEBUG_STACKOVERFLOW=y +# CONFIG_KPROBES is not set +CONFIG_DEBUG_STACK_USAGE=y +# CONFIG_DEBUGGER is not set +# CONFIG_PPCDBG is not set +CONFIG_IRQSTACKS=y + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_SHA1=m +CONFIG_CRYPTO_SHA256=m +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_WP512=m +CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_DES=y +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_AES=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_KHAZAD=m +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_TEST=m + +# +# Hardware crypto devices +# + +# +# Library routines +# +CONFIG_CRC_CCITT=m +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +CONFIG_LIBCRC32C=m +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=m +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_TEXTSEARCH_BM=m +CONFIG_TEXTSEARCH_FSM=m diff --git a/arch/powerpc/configs/maple_defconfig b/arch/powerpc/configs/maple_defconfig new file mode 100644 index 00000000000..7b480f3d140 --- /dev/null +++ b/arch/powerpc/configs/maple_defconfig @@ -0,0 +1,1062 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.14-rc4 +# Thu Oct 20 08:31:24 2005 +# +CONFIG_64BIT=y +CONFIG_MMU=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_ISA_DMA=y +CONFIG_EARLY_PRINTK=y +CONFIG_COMPAT=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_FORCE_MAX_ZONEORDER=13 + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_CLEAN_COMPILE=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +# CONFIG_HOTPLUG is not set +CONFIG_KOBJECT_UEVENT=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +# CONFIG_CPUSETS is not set +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_EMBEDDED is not set +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_OBSOLETE_MODPARM=y +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_KMOD=y +CONFIG_STOP_MACHINE=y +CONFIG_SYSVIPC_COMPAT=y + +# +# Platform support +# +# CONFIG_PPC_ISERIES is not set +CONFIG_PPC_MULTIPLATFORM=y +# CONFIG_PPC_PSERIES is not set +# CONFIG_PPC_BPA is not set +# CONFIG_PPC_PMAC is not set +CONFIG_PPC_MAPLE=y +CONFIG_PPC=y +CONFIG_PPC64=y +CONFIG_PPC_OF=y +CONFIG_MPIC=y +# CONFIG_ALTIVEC is not set +CONFIG_KEXEC=y +CONFIG_U3_DART=y +CONFIG_MPIC_BROKEN_U3=y +CONFIG_BOOTX_TEXT=y +CONFIG_POWER4_ONLY=y +CONFIG_IOMMU_VMERGE=y +CONFIG_SMP=y +CONFIG_NR_CPUS=2 +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_NUMA is not set +# CONFIG_SCHED_SMT is not set +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +# CONFIG_PREEMPT_BKL is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_GENERIC_HARDIRQS=y +CONFIG_SECCOMP=y +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +CONFIG_PROC_DEVICETREE=y +# CONFIG_CMDLINE_BOOL is not set +CONFIG_ISA_DMA_API=y + +# +# Bus Options +# +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +CONFIG_PCI_LEGACY_PROC=y +# CONFIG_PCI_DEBUG is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PCI Hotplug Support +# +# CONFIG_HOTPLUG_PCI is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=8192 +# CONFIG_BLK_DEV_INITRD is not set +# CONFIG_CDROM_PKTCDVD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +CONFIG_IDE=y +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=y +# CONFIG_IDEDISK_MULTI_MODE is not set +CONFIG_BLK_DEV_IDECD=y +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +CONFIG_IDE_TASK_IOCTL=y + +# +# IDE chipset support/bugfixes +# +CONFIG_IDE_GENERIC=y +CONFIG_BLK_DEV_IDEPCI=y +CONFIG_IDEPCI_SHARE_IRQ=y +# CONFIG_BLK_DEV_OFFBOARD is not set +CONFIG_BLK_DEV_GENERIC=y +# CONFIG_BLK_DEV_OPTI621 is not set +# CONFIG_BLK_DEV_SL82C105 is not set +CONFIG_BLK_DEV_IDEDMA_PCI=y +# CONFIG_BLK_DEV_IDEDMA_FORCED is not set +CONFIG_IDEDMA_PCI_AUTO=y +# CONFIG_IDEDMA_ONLYDISK is not set +# CONFIG_BLK_DEV_AEC62XX is not set +# CONFIG_BLK_DEV_ALI15X3 is not set +CONFIG_BLK_DEV_AMD74XX=y +# CONFIG_BLK_DEV_CMD64X is not set +# CONFIG_BLK_DEV_TRIFLEX is not set +# CONFIG_BLK_DEV_CY82C693 is not set +# CONFIG_BLK_DEV_CS5520 is not set +# CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_HPT34X is not set +# CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_SC1200 is not set +# CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT821X is not set +# CONFIG_BLK_DEV_NS87415 is not set +# CONFIG_BLK_DEV_PDC202XX_OLD is not set +# CONFIG_BLK_DEV_PDC202XX_NEW is not set +# CONFIG_BLK_DEV_SVWKS is not set +# CONFIG_BLK_DEV_SIIMAGE is not set +# CONFIG_BLK_DEV_SLC90E66 is not set +# CONFIG_BLK_DEV_TRM290 is not set +# CONFIG_BLK_DEV_VIA82CXXX is not set +# CONFIG_IDE_ARM is not set +CONFIG_BLK_DEV_IDEDMA=y +# CONFIG_IDEDMA_IVB is not set +CONFIG_IDEDMA_AUTO=y +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Macintosh device drivers +# + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# PHY device support +# +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set + +# +# Tulip family network device support +# +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +CONFIG_NET_PCI=y +# CONFIG_PCNET32 is not set +CONFIG_AMD8111_ETH=y +# CONFIG_AMD8111E_NAPI is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_B44 is not set +# CONFIG_FORCEDETH is not set +# CONFIG_DGRS is not set +# CONFIG_EEPRO100 is not set +# CONFIG_E100 is not set +# CONFIG_FEALNX is not set +# CONFIG_NATSEMI is not set +# CONFIG_NE2K_PCI is not set +# CONFIG_8139CP is not set +# CONFIG_8139TOO is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_VIA_RHINE is not set + +# +# Ethernet (1000 Mbit) +# +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +CONFIG_E1000=y +# CONFIG_E1000_NAPI is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +# CONFIG_MV643XX_ETH is not set + +# +# Ethernet (10000 Mbit) +# +# CONFIG_CHELSIO_T1 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set + +# +# Token Ring devices +# +# CONFIG_TR is not set + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1600 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1200 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_AGP is not set +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_HANGCHECK_TIMER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# +# I2C support +# +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +CONFIG_I2C_ALGOBIT=y +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +CONFIG_I2C_AMD8111=y +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_SCx200_ACB is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_ISA is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +# CONFIG_HWMON is not set +# CONFIG_HWMON_VID is not set + +# +# Misc devices +# + +# +# Multimedia Capabilities Port drivers +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +# CONFIG_FB is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_BANDWIDTH is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_SPLIT_ISO=y +CONFIG_USB_EHCI_ROOT_HUB_TT=y +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +CONFIG_USB_UHCI_HCD=y +# CONFIG_USB_SL811_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_BLUETOOTH_TTY is not set +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# +# CONFIG_USB_STORAGE is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +CONFIG_USB_HIDINPUT=y +# CONFIG_HID_FF is not set +# CONFIG_USB_HIDDEV is not set +# CONFIG_USB_AIPTEK is not set +# CONFIG_USB_WACOM is not set +# CONFIG_USB_ACECAD is not set +# CONFIG_USB_KBTAB is not set +# CONFIG_USB_POWERMATE is not set +# CONFIG_USB_MTOUCH is not set +# CONFIG_USB_ITMTOUCH is not set +# CONFIG_USB_EGALAX is not set +# CONFIG_USB_YEALINK is not set +# CONFIG_USB_XPAD is not set +# CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_APPLETOUCH is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set + +# +# USB Multimedia devices +# +# CONFIG_USB_DABUSB is not set + +# +# Video4Linux support is needed for USB Multimedia device support +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +CONFIG_USB_PEGASUS=y +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +CONFIG_USB_SERIAL=y +# CONFIG_USB_SERIAL_CONSOLE is not set +CONFIG_USB_SERIAL_GENERIC=y +# CONFIG_USB_SERIAL_AIRPRIME is not set +# CONFIG_USB_SERIAL_BELKIN is not set +# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set +# CONFIG_USB_SERIAL_CP2101 is not set +CONFIG_USB_SERIAL_CYPRESS_M8=m +# CONFIG_USB_SERIAL_EMPEG is not set +# CONFIG_USB_SERIAL_FTDI_SIO is not set +# CONFIG_USB_SERIAL_VISOR is not set +# CONFIG_USB_SERIAL_IPAQ is not set +# CONFIG_USB_SERIAL_IR is not set +# CONFIG_USB_SERIAL_EDGEPORT is not set +# CONFIG_USB_SERIAL_EDGEPORT_TI is not set +CONFIG_USB_SERIAL_GARMIN=m +CONFIG_USB_SERIAL_IPW=m +# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set +CONFIG_USB_SERIAL_KEYSPAN=y +CONFIG_USB_SERIAL_KEYSPAN_MPR=y +CONFIG_USB_SERIAL_KEYSPAN_USA28=y +CONFIG_USB_SERIAL_KEYSPAN_USA28X=y +CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y +CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y +CONFIG_USB_SERIAL_KEYSPAN_USA19=y +CONFIG_USB_SERIAL_KEYSPAN_USA18X=y +CONFIG_USB_SERIAL_KEYSPAN_USA19W=y +CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y +CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y +CONFIG_USB_SERIAL_KEYSPAN_USA49W=y +CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y +# CONFIG_USB_SERIAL_KLSI is not set +# CONFIG_USB_SERIAL_KOBIL_SCT is not set +# CONFIG_USB_SERIAL_MCT_U232 is not set +# CONFIG_USB_SERIAL_PL2303 is not set +# CONFIG_USB_SERIAL_HP4X is not set +# CONFIG_USB_SERIAL_SAFE is not set +CONFIG_USB_SERIAL_TI=m +# CONFIG_USB_SERIAL_CYBERJACK is not set +# CONFIG_USB_SERIAL_XIRCOM is not set +# CONFIG_USB_SERIAL_OMNINET is not set +CONFIG_USB_EZUSB=y + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGETKIT is not set +# CONFIG_USB_PHIDGETSERVO is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# SN Devices +# + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +CONFIG_EXT2_FS_XIP=y +CONFIG_FS_XIP=y +CONFIG_EXT3_FS=y +# CONFIG_EXT3_FS_XATTR is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +CONFIG_HUGETLBFS=y +CONFIG_HUGETLB_PAGE=y +CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_ACL_SUPPORT=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +CONFIG_MAC_PARTITION=y +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_EFI_PARTITION is not set + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="utf-8" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=y + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_DEBUG_KERNEL=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_LOG_BUF_SHIFT=17 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +CONFIG_DEBUG_SLAB=y +# CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_SPINLOCK_SLEEP=y +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_INFO is not set +CONFIG_DEBUG_FS=y +CONFIG_DEBUG_STACKOVERFLOW=y +# CONFIG_KPROBES is not set +CONFIG_DEBUG_STACK_USAGE=y +CONFIG_DEBUGGER=y +CONFIG_XMON=y +CONFIG_XMON_DEFAULT=y +# CONFIG_PPCDBG is not set +# CONFIG_IRQSTACKS is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Hardware crypto devices +# + +# +# Library routines +# +CONFIG_CRC_CCITT=y +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig new file mode 100644 index 00000000000..9f09dff9e11 --- /dev/null +++ b/arch/powerpc/configs/pseries_defconfig @@ -0,0 +1,1371 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.14-rc4 +# Thu Oct 20 08:32:17 2005 +# +CONFIG_64BIT=y +CONFIG_MMU=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_ISA_DMA=y +CONFIG_EARLY_PRINTK=y +CONFIG_COMPAT=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_FORCE_MAX_ZONEORDER=13 + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_CLEAN_COMPILE=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +CONFIG_AUDIT=y +CONFIG_AUDITSYSCALL=y +CONFIG_HOTPLUG=y +CONFIG_KOBJECT_UEVENT=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_CPUSETS=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_EMBEDDED is not set +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_OBSOLETE_MODPARM=y +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_KMOD=y +CONFIG_STOP_MACHINE=y +CONFIG_SYSVIPC_COMPAT=y + +# +# Platform support +# +# CONFIG_PPC_ISERIES is not set +CONFIG_PPC_MULTIPLATFORM=y +CONFIG_PPC_PSERIES=y +# CONFIG_PPC_BPA is not set +# CONFIG_PPC_PMAC is not set +# CONFIG_PPC_MAPLE is not set +CONFIG_PPC=y +CONFIG_PPC64=y +CONFIG_PPC_OF=y +CONFIG_XICS=y +CONFIG_MPIC=y +CONFIG_ALTIVEC=y +CONFIG_PPC_SPLPAR=y +CONFIG_KEXEC=y +CONFIG_IBMVIO=y +# CONFIG_U3_DART is not set +# CONFIG_BOOTX_TEXT is not set +# CONFIG_POWER4_ONLY is not set +CONFIG_IOMMU_VMERGE=y +CONFIG_SMP=y +CONFIG_NR_CPUS=128 +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_DISCONTIGMEM_ENABLE=y +CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_SELECT_MEMORY_MODEL=y +# CONFIG_FLATMEM_MANUAL is not set +CONFIG_DISCONTIGMEM_MANUAL=y +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_DISCONTIGMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_NEED_MULTIPLE_NODES=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y +CONFIG_NODES_SPAN_OTHER_NODES=y +CONFIG_NUMA=y +CONFIG_SCHED_SMT=y +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +# CONFIG_PREEMPT_BKL is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_EEH=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_PPC_RTAS=y +CONFIG_RTAS_PROC=y +CONFIG_RTAS_FLASH=m +CONFIG_SCANLOG=m +CONFIG_LPARCFG=y +CONFIG_SECCOMP=y +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +CONFIG_HOTPLUG_CPU=y +CONFIG_PROC_DEVICETREE=y +# CONFIG_CMDLINE_BOOL is not set +CONFIG_ISA_DMA_API=y + +# +# Bus Options +# +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +CONFIG_PCI_LEGACY_PROC=y +# CONFIG_PCI_DEBUG is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PCI Hotplug Support +# +CONFIG_HOTPLUG_PCI=m +# CONFIG_HOTPLUG_PCI_FAKE is not set +# CONFIG_HOTPLUG_PCI_CPCI is not set +# CONFIG_HOTPLUG_PCI_SHPC is not set +CONFIG_HOTPLUG_PCI_RPA=m +CONFIG_HOTPLUG_PCI_RPA_DLPAR=m + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +CONFIG_XFRM_USER=m +CONFIG_NET_KEY=m +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +CONFIG_NET_IPIP=y +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +CONFIG_INET_AH=m +CONFIG_INET_ESP=m +CONFIG_INET_IPCOMP=m +CONFIG_INET_TUNNEL=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y + +# +# IP: Virtual Server Configuration +# +# CONFIG_IP_VS is not set +# CONFIG_IPV6 is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_NETLINK=y +CONFIG_NETFILTER_NETLINK_QUEUE=m +CONFIG_NETFILTER_NETLINK_LOG=m + +# +# IP: Netfilter Configuration +# +CONFIG_IP_NF_CONNTRACK=m +CONFIG_IP_NF_CT_ACCT=y +CONFIG_IP_NF_CONNTRACK_MARK=y +CONFIG_IP_NF_CONNTRACK_EVENTS=y +CONFIG_IP_NF_CONNTRACK_NETLINK=m +CONFIG_IP_NF_CT_PROTO_SCTP=m +CONFIG_IP_NF_FTP=m +CONFIG_IP_NF_IRC=m +# CONFIG_IP_NF_NETBIOS_NS is not set +CONFIG_IP_NF_TFTP=m +CONFIG_IP_NF_AMANDA=m +# CONFIG_IP_NF_PPTP is not set +CONFIG_IP_NF_QUEUE=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_LIMIT=m +CONFIG_IP_NF_MATCH_IPRANGE=m +CONFIG_IP_NF_MATCH_MAC=m +CONFIG_IP_NF_MATCH_PKTTYPE=m +CONFIG_IP_NF_MATCH_MARK=m +CONFIG_IP_NF_MATCH_MULTIPORT=m +CONFIG_IP_NF_MATCH_TOS=m +CONFIG_IP_NF_MATCH_RECENT=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_DSCP=m +CONFIG_IP_NF_MATCH_AH_ESP=m +CONFIG_IP_NF_MATCH_LENGTH=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_MATCH_TCPMSS=m +CONFIG_IP_NF_MATCH_HELPER=m +CONFIG_IP_NF_MATCH_STATE=m +CONFIG_IP_NF_MATCH_CONNTRACK=m +CONFIG_IP_NF_MATCH_OWNER=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m +CONFIG_IP_NF_MATCH_REALM=m +CONFIG_IP_NF_MATCH_SCTP=m +# CONFIG_IP_NF_MATCH_DCCP is not set +CONFIG_IP_NF_MATCH_COMMENT=m +CONFIG_IP_NF_MATCH_CONNMARK=m +CONFIG_IP_NF_MATCH_CONNBYTES=m +CONFIG_IP_NF_MATCH_HASHLIMIT=m +CONFIG_IP_NF_MATCH_STRING=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_LOG=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_IP_NF_TARGET_TCPMSS=m +CONFIG_IP_NF_TARGET_NFQUEUE=m +CONFIG_IP_NF_NAT=m +CONFIG_IP_NF_NAT_NEEDED=y +CONFIG_IP_NF_TARGET_MASQUERADE=m +CONFIG_IP_NF_TARGET_REDIRECT=m +CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_SAME=m +CONFIG_IP_NF_NAT_SNMP_BASIC=m +CONFIG_IP_NF_NAT_IRC=m +CONFIG_IP_NF_NAT_FTP=m +CONFIG_IP_NF_NAT_TFTP=m +CONFIG_IP_NF_NAT_AMANDA=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_TOS=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_DSCP=m +CONFIG_IP_NF_TARGET_MARK=m +CONFIG_IP_NF_TARGET_CLASSIFY=m +CONFIG_IP_NF_TARGET_TTL=m +CONFIG_IP_NF_TARGET_CONNMARK=m +CONFIG_IP_NF_TARGET_CLUSTERIP=m +CONFIG_IP_NF_RAW=m +CONFIG_IP_NF_TARGET_NOTRACK=m +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +CONFIG_LLC=y +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +CONFIG_NET_CLS_ROUTE=y + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_DEBUG_DRIVER is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +CONFIG_PARPORT=m +CONFIG_PARPORT_PC=m +# CONFIG_PARPORT_SERIAL is not set +# CONFIG_PARPORT_PC_FIFO is not set +# CONFIG_PARPORT_PC_SUPERIO is not set +# CONFIG_PARPORT_GSC is not set +# CONFIG_PARPORT_1284 is not set + +# +# Plug and Play support +# + +# +# Block devices +# +CONFIG_BLK_DEV_FD=m +# CONFIG_PARIDE is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +CONFIG_BLK_DEV_NBD=m +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=65536 +CONFIG_BLK_DEV_INITRD=y +# CONFIG_CDROM_PKTCDVD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +CONFIG_IDE=y +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=y +# CONFIG_IDEDISK_MULTI_MODE is not set +CONFIG_BLK_DEV_IDECD=y +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_BLK_DEV_IDESCSI is not set +# CONFIG_IDE_TASK_IOCTL is not set + +# +# IDE chipset support/bugfixes +# +CONFIG_IDE_GENERIC=y +CONFIG_BLK_DEV_IDEPCI=y +CONFIG_IDEPCI_SHARE_IRQ=y +# CONFIG_BLK_DEV_OFFBOARD is not set +CONFIG_BLK_DEV_GENERIC=y +# CONFIG_BLK_DEV_OPTI621 is not set +CONFIG_BLK_DEV_SL82C105=y +CONFIG_BLK_DEV_IDEDMA_PCI=y +# CONFIG_BLK_DEV_IDEDMA_FORCED is not set +CONFIG_IDEDMA_PCI_AUTO=y +# CONFIG_IDEDMA_ONLYDISK is not set +# CONFIG_BLK_DEV_AEC62XX is not set +# CONFIG_BLK_DEV_ALI15X3 is not set +CONFIG_BLK_DEV_AMD74XX=y +# CONFIG_BLK_DEV_CMD64X is not set +# CONFIG_BLK_DEV_TRIFLEX is not set +# CONFIG_BLK_DEV_CY82C693 is not set +# CONFIG_BLK_DEV_CS5520 is not set +# CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_HPT34X is not set +# CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_SC1200 is not set +# CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT821X is not set +# CONFIG_BLK_DEV_NS87415 is not set +# CONFIG_BLK_DEV_PDC202XX_OLD is not set +# CONFIG_BLK_DEV_PDC202XX_NEW is not set +# CONFIG_BLK_DEV_SVWKS is not set +# CONFIG_BLK_DEV_SIIMAGE is not set +# CONFIG_BLK_DEV_SLC90E66 is not set +# CONFIG_BLK_DEV_TRM290 is not set +# CONFIG_BLK_DEV_VIA82CXXX is not set +# CONFIG_IDE_ARM is not set +CONFIG_BLK_DEV_IDEDMA=y +# CONFIG_IDEDMA_IVB is not set +CONFIG_IDEDMA_AUTO=y +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +CONFIG_CHR_DEV_ST=y +# CONFIG_CHR_DEV_OSST is not set +CONFIG_BLK_DEV_SR=y +CONFIG_BLK_DEV_SR_VENDOR=y +CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +CONFIG_SCSI_MULTI_LUN=y +CONFIG_SCSI_CONSTANTS=y +# CONFIG_SCSI_LOGGING is not set + +# +# SCSI Transport Attributes +# +CONFIG_SCSI_SPI_ATTRS=y +CONFIG_SCSI_FC_ATTRS=y +CONFIG_SCSI_ISCSI_ATTRS=m +# CONFIG_SCSI_SAS_ATTRS is not set + +# +# SCSI low-level drivers +# +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_SATA is not set +# CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_EATA is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_GDTH is not set +# CONFIG_SCSI_IPS is not set +CONFIG_SCSI_IBMVSCSI=y +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_PPA is not set +# CONFIG_SCSI_IMM is not set +CONFIG_SCSI_SYM53C8XX_2=y +CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0 +CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 +CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 +# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set +CONFIG_SCSI_IPR=y +CONFIG_SCSI_IPR_TRACE=y +CONFIG_SCSI_IPR_DUMP=y +# CONFIG_SCSI_QLOGIC_FC is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +CONFIG_SCSI_QLA2XXX=y +CONFIG_SCSI_QLA21XX=m +CONFIG_SCSI_QLA22XX=m +CONFIG_SCSI_QLA2300=m +CONFIG_SCSI_QLA2322=m +CONFIG_SCSI_QLA6312=m +CONFIG_SCSI_QLA24XX=m +CONFIG_SCSI_LPFC=m +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_DEBUG is not set + +# +# Multi-device support (RAID and LVM) +# +CONFIG_MD=y +CONFIG_BLK_DEV_MD=y +CONFIG_MD_LINEAR=y +CONFIG_MD_RAID0=y +CONFIG_MD_RAID1=y +CONFIG_MD_RAID10=m +CONFIG_MD_RAID5=y +CONFIG_MD_RAID6=m +CONFIG_MD_MULTIPATH=m +CONFIG_MD_FAULTY=m +CONFIG_BLK_DEV_DM=y +CONFIG_DM_CRYPT=m +CONFIG_DM_SNAPSHOT=m +CONFIG_DM_MIRROR=m +CONFIG_DM_ZERO=m +CONFIG_DM_MULTIPATH=m +CONFIG_DM_MULTIPATH_EMC=m + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Macintosh device drivers +# + +# +# Network device support +# +CONFIG_NETDEVICES=y +CONFIG_DUMMY=m +CONFIG_BONDING=m +# CONFIG_EQUALIZER is not set +CONFIG_TUN=m + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# PHY device support +# +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +CONFIG_NET_VENDOR_3COM=y +CONFIG_VORTEX=y +# CONFIG_TYPHOON is not set + +# +# Tulip family network device support +# +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +CONFIG_IBMVETH=y +CONFIG_NET_PCI=y +CONFIG_PCNET32=y +# CONFIG_AMD8111_ETH is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_B44 is not set +# CONFIG_FORCEDETH is not set +# CONFIG_DGRS is not set +# CONFIG_EEPRO100 is not set +CONFIG_E100=y +# CONFIG_FEALNX is not set +# CONFIG_NATSEMI is not set +# CONFIG_NE2K_PCI is not set +# CONFIG_8139CP is not set +# CONFIG_8139TOO is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_VIA_RHINE is not set +# CONFIG_NET_POCKET is not set + +# +# Ethernet (1000 Mbit) +# +CONFIG_ACENIC=y +CONFIG_ACENIC_OMIT_TIGON_I=y +# CONFIG_DL2K is not set +CONFIG_E1000=y +# CONFIG_E1000_NAPI is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set +CONFIG_TIGON3=y +# CONFIG_BNX2 is not set +# CONFIG_MV643XX_ETH is not set + +# +# Ethernet (10000 Mbit) +# +# CONFIG_CHELSIO_T1 is not set +CONFIG_IXGB=m +# CONFIG_IXGB_NAPI is not set +CONFIG_S2IO=m +# CONFIG_S2IO_NAPI is not set +# CONFIG_2BUFF_MODE is not set + +# +# Token Ring devices +# +CONFIG_TR=y +CONFIG_IBMOL=y +# CONFIG_3C359 is not set +# CONFIG_TMS380TR is not set + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PLIP is not set +CONFIG_PPP=m +# CONFIG_PPP_MULTILINK is not set +# CONFIG_PPP_FILTER is not set +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +CONFIG_PPPOE=m +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_SHAPER is not set +CONFIG_NETCONSOLE=y +CONFIG_NETPOLL=y +CONFIG_NETPOLL_RX=y +CONFIG_NETPOLL_TRAP=y +CONFIG_NET_POLL_CONTROLLER=y + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +CONFIG_INPUT_MOUSE=y +CONFIG_MOUSE_PS2=y +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +CONFIG_INPUT_MISC=y +CONFIG_INPUT_PCSPKR=m +# CONFIG_INPUT_UINPUT is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_I8042=y +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_PARKBD is not set +# CONFIG_SERIO_PCIPS2 is not set +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_SERIAL_ICOM=m +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_PRINTER is not set +# CONFIG_PPDEV is not set +# CONFIG_TIPAR is not set +CONFIG_HVC_CONSOLE=y +CONFIG_HVCS=m + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_AGP is not set +# CONFIG_DRM is not set +CONFIG_RAW_DRIVER=y +CONFIG_MAX_RAW_DEVS=1024 +# CONFIG_HANGCHECK_TIMER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# +# I2C support +# +CONFIG_I2C=y +# CONFIG_I2C_CHARDEV is not set + +# +# I2C Algorithms +# +CONFIG_I2C_ALGOBIT=y +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_PARPORT is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_SCx200_ACB is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_ISA is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +# CONFIG_HWMON is not set +# CONFIG_HWMON_VID is not set + +# +# Misc devices +# + +# +# Multimedia Capabilities Port drivers +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +CONFIG_FB=y +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +CONFIG_FB_SOFT_CURSOR=y +CONFIG_FB_MACMODES=y +CONFIG_FB_MODE_HELPERS=y +CONFIG_FB_TILEBLITTING=y +# CONFIG_FB_CIRRUS is not set +# CONFIG_FB_PM2 is not set +# CONFIG_FB_CYBER2000 is not set +CONFIG_FB_OF=y +# CONFIG_FB_CT65550 is not set +# CONFIG_FB_ASILIANT is not set +# CONFIG_FB_IMSTT is not set +# CONFIG_FB_VGA16 is not set +# CONFIG_FB_NVIDIA is not set +# CONFIG_FB_RIVA is not set +CONFIG_FB_MATROX=y +CONFIG_FB_MATROX_MILLENIUM=y +CONFIG_FB_MATROX_MYSTIQUE=y +CONFIG_FB_MATROX_G=y +# CONFIG_FB_MATROX_I2C is not set +CONFIG_FB_MATROX_MULTIHEAD=y +# CONFIG_FB_RADEON_OLD is not set +CONFIG_FB_RADEON=y +CONFIG_FB_RADEON_I2C=y +# CONFIG_FB_RADEON_DEBUG is not set +# CONFIG_FB_ATY128 is not set +# CONFIG_FB_ATY is not set +# CONFIG_FB_SAVAGE is not set +# CONFIG_FB_SIS is not set +# CONFIG_FB_NEOMAGIC is not set +# CONFIG_FB_KYRO is not set +# CONFIG_FB_3DFX is not set +# CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_CYBLA is not set +# CONFIG_FB_TRIDENT is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y + +# +# Logo configuration +# +CONFIG_LOGO=y +CONFIG_LOGO_LINUX_MONO=y +CONFIG_LOGO_LINUX_VGA16=y +CONFIG_LOGO_LINUX_CLUT224=y +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_BACKLIGHT_CLASS_DEVICE=m +CONFIG_BACKLIGHT_DEVICE=y +CONFIG_LCD_CLASS_DEVICE=m +CONFIG_LCD_DEVICE=y + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_BANDWIDTH is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +CONFIG_USB_EHCI_HCD=y +# CONFIG_USB_EHCI_SPLIT_ISO is not set +# CONFIG_USB_EHCI_ROOT_HUB_TT is not set +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_BLUETOOTH_TTY is not set +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +CONFIG_USB_HIDINPUT=y +# CONFIG_HID_FF is not set +CONFIG_USB_HIDDEV=y +# CONFIG_USB_AIPTEK is not set +# CONFIG_USB_WACOM is not set +# CONFIG_USB_ACECAD is not set +# CONFIG_USB_KBTAB is not set +# CONFIG_USB_POWERMATE is not set +# CONFIG_USB_MTOUCH is not set +# CONFIG_USB_ITMTOUCH is not set +# CONFIG_USB_EGALAX is not set +# CONFIG_USB_YEALINK is not set +# CONFIG_USB_XPAD is not set +# CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_APPLETOUCH is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB Multimedia devices +# +# CONFIG_USB_DABUSB is not set + +# +# Video4Linux support is needed for USB Multimedia device support +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# +# CONFIG_USB_USS720 is not set + +# +# USB Serial Converter support +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGETKIT is not set +# CONFIG_USB_PHIDGETSERVO is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# InfiniBand support +# +CONFIG_INFINIBAND=m +# CONFIG_INFINIBAND_USER_MAD is not set +# CONFIG_INFINIBAND_USER_ACCESS is not set +CONFIG_INFINIBAND_MTHCA=m +# CONFIG_INFINIBAND_MTHCA_DEBUG is not set +CONFIG_INFINIBAND_IPOIB=m +# CONFIG_INFINIBAND_IPOIB_DEBUG is not set + +# +# SN Devices +# + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +CONFIG_EXT2_FS_SECURITY=y +CONFIG_EXT2_FS_XIP=y +CONFIG_FS_XIP=y +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +CONFIG_EXT3_FS_POSIX_ACL=y +CONFIG_EXT3_FS_SECURITY=y +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +CONFIG_REISERFS_FS=y +# CONFIG_REISERFS_CHECK is not set +# CONFIG_REISERFS_PROC_INFO is not set +CONFIG_REISERFS_FS_XATTR=y +CONFIG_REISERFS_FS_POSIX_ACL=y +CONFIG_REISERFS_FS_SECURITY=y +CONFIG_JFS_FS=m +CONFIG_JFS_POSIX_ACL=y +CONFIG_JFS_SECURITY=y +# CONFIG_JFS_DEBUG is not set +# CONFIG_JFS_STATISTICS is not set +CONFIG_FS_POSIX_ACL=y +CONFIG_XFS_FS=m +CONFIG_XFS_EXPORT=y +# CONFIG_XFS_QUOTA is not set +CONFIG_XFS_SECURITY=y +CONFIG_XFS_POSIX_ACL=y +# CONFIG_XFS_RT is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +CONFIG_AUTOFS_FS=m +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=y +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_ZISOFS_FS=y +CONFIG_UDF_FS=m +CONFIG_UDF_NLS=y + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +CONFIG_HUGETLBFS=y +CONFIG_HUGETLB_PAGE=y +CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +# CONFIG_NFS_DIRECTIO is not set +CONFIG_NFSD=y +CONFIG_NFSD_V2_ACL=y +CONFIG_NFSD_V3=y +CONFIG_NFSD_V3_ACL=y +CONFIG_NFSD_V4=y +CONFIG_NFSD_TCP=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=y +CONFIG_NFS_ACL_SUPPORT=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y +CONFIG_RPCSEC_GSS_SPKM3=m +# CONFIG_SMB_FS is not set +CONFIG_CIFS=m +# CONFIG_CIFS_STATS is not set +CONFIG_CIFS_XATTR=y +CONFIG_CIFS_POSIX=y +# CONFIG_CIFS_EXPERIMENTAL is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +CONFIG_NLS_ASCII=y +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Profiling support +# +CONFIG_PROFILING=y +CONFIG_OPROFILE=y + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_DEBUG_KERNEL=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_LOG_BUF_SHIFT=17 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_INFO is not set +CONFIG_DEBUG_FS=y +CONFIG_DEBUG_STACKOVERFLOW=y +# CONFIG_KPROBES is not set +CONFIG_DEBUG_STACK_USAGE=y +CONFIG_DEBUGGER=y +CONFIG_XMON=y +CONFIG_XMON_DEFAULT=y +# CONFIG_PPCDBG is not set +CONFIG_IRQSTACKS=y + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_SHA1=m +CONFIG_CRYPTO_SHA256=m +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_WP512=m +CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_DES=y +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_AES=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_KHAZAD=m +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_TEST=m + +# +# Hardware crypto devices +# + +# +# Library routines +# +CONFIG_CRC_CCITT=m +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +CONFIG_LIBCRC32C=m +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=m +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_TEXTSEARCH_BM=m +CONFIG_TEXTSEARCH_FSM=m diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index 572d4f5eaac..b3ae2993efb 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -13,12 +13,15 @@ endif obj-y := semaphore.o cputable.o ptrace.o syscalls.o \ signal_32.o pmc.o obj-$(CONFIG_PPC64) += setup_64.o binfmt_elf32.o sys_ppc32.o \ - ptrace32.o systbl.o + signal_64.o ptrace32.o systbl.o obj-$(CONFIG_ALTIVEC) += vecemu.o vector.o obj-$(CONFIG_POWER4) += idle_power4.o obj-$(CONFIG_PPC_OF) += of_device.o obj-$(CONFIG_PPC_RTAS) += rtas.o +obj-$(CONFIG_RTAS_FLASH) += rtas_flash.o +obj-$(CONFIG_RTAS_PROC) += rtas-proc.o obj-$(CONFIG_IBMVIO) += vio.o +obj-$(CONFIG_GENERIC_TBSYNC) += smp-tbsync.o ifeq ($(CONFIG_PPC_MERGE),y) @@ -38,6 +41,7 @@ obj-$(CONFIG_PPC_OF) += prom_init.o obj-$(CONFIG_MODULES) += ppc_ksyms.o obj-$(CONFIG_BOOTX_TEXT) += btext.o obj-$(CONFIG_6xx) += idle_6xx.o +obj-$(CONFIG_SMP) += smp.o ifeq ($(CONFIG_PPC_ISERIES),y) $(obj)/head_64.o: $(obj)/lparmap.s @@ -46,8 +50,9 @@ endif else # stuff used from here for ARCH=ppc or ARCH=ppc64 +smpobj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_PPC64) += traps.o process.o init_task.o time.o \ - setup-common.o + setup-common.o $(smpobj-y) endif diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c index 330cd783206..bc5a3689cc0 100644 --- a/arch/powerpc/kernel/asm-offsets.c +++ b/arch/powerpc/kernel/asm-offsets.c @@ -40,7 +40,7 @@ #ifdef CONFIG_PPC64 #include <asm/paca.h> #include <asm/lppaca.h> -#include <asm/iSeries/HvLpEvent.h> +#include <asm/iseries/hv_lp_event.h> #include <asm/cache.h> #include <asm/systemcfg.h> #include <asm/compat.h> diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S index 147215a0d6c..45d81976987 100644 --- a/arch/powerpc/kernel/head_64.S +++ b/arch/powerpc/kernel/head_64.S @@ -35,7 +35,7 @@ #include <asm/cputable.h> #include <asm/setup.h> #include <asm/hvcall.h> -#include <asm/iSeries/LparMap.h> +#include <asm/iseries/lpar_map.h> #include <asm/thread_info.h> #ifdef CONFIG_PPC_ISERIES @@ -1914,24 +1914,6 @@ _GLOBAL(hmt_start_secondary) blr #endif -#if defined(CONFIG_KEXEC) || defined(CONFIG_SMP) -_GLOBAL(smp_release_cpus) - /* All secondary cpus are spinning on a common - * spinloop, release them all now so they can start - * to spin on their individual paca spinloops. - * For non SMP kernels, the secondary cpus never - * get out of the common spinloop. - * XXX This does nothing useful on iSeries, secondaries are - * already waiting on their paca. - */ - li r3,1 - LOADADDR(r5,__secondary_hold_spinloop) - std r3,0(r5) - sync - blr -#endif /* CONFIG_SMP */ - - /* * We put a few things here that have to be page-aligned. * This stuff goes at the beginning of the bss, which is page-aligned. diff --git a/arch/powerpc/kernel/lparmap.c b/arch/powerpc/kernel/lparmap.c index b81de286df5..eded971d1bf 100644 --- a/arch/powerpc/kernel/lparmap.c +++ b/arch/powerpc/kernel/lparmap.c @@ -8,7 +8,7 @@ */ #include <asm/mmu.h> #include <asm/page.h> -#include <asm/iSeries/LparMap.h> +#include <asm/iseries/lpar_map.h> const struct LparMap __attribute__((__section__(".text"))) xLparMap = { .xNumberEsids = HvEsidsToMap, diff --git a/arch/powerpc/kernel/ppc32.h b/arch/powerpc/kernel/ppc32.h new file mode 100644 index 00000000000..90e56277179 --- /dev/null +++ b/arch/powerpc/kernel/ppc32.h @@ -0,0 +1,138 @@ +#ifndef _PPC64_PPC32_H +#define _PPC64_PPC32_H + +#include <linux/compat.h> +#include <asm/siginfo.h> +#include <asm/signal.h> + +/* + * Data types and macros for providing 32b PowerPC support. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +/* These are here to support 32-bit syscalls on a 64-bit kernel. */ + +typedef struct compat_siginfo { + int si_signo; + int si_errno; + int si_code; + + union { + int _pad[SI_PAD_SIZE32]; + + /* kill() */ + struct { + compat_pid_t _pid; /* sender's pid */ + compat_uid_t _uid; /* sender's uid */ + } _kill; + + /* POSIX.1b timers */ + struct { + compat_timer_t _tid; /* timer id */ + int _overrun; /* overrun count */ + compat_sigval_t _sigval; /* same as below */ + int _sys_private; /* not to be passed to user */ + } _timer; + + /* POSIX.1b signals */ + struct { + compat_pid_t _pid; /* sender's pid */ + compat_uid_t _uid; /* sender's uid */ + compat_sigval_t _sigval; + } _rt; + + /* SIGCHLD */ + struct { + compat_pid_t _pid; /* which child */ + compat_uid_t _uid; /* sender's uid */ + int _status; /* exit code */ + compat_clock_t _utime; + compat_clock_t _stime; + } _sigchld; + + /* SIGILL, SIGFPE, SIGSEGV, SIGBUS, SIGEMT */ + struct { + unsigned int _addr; /* faulting insn/memory ref. */ + } _sigfault; + + /* SIGPOLL */ + struct { + int _band; /* POLL_IN, POLL_OUT, POLL_MSG */ + int _fd; + } _sigpoll; + } _sifields; +} compat_siginfo_t; + +#define __old_sigaction32 old_sigaction32 + +struct __old_sigaction32 { + compat_uptr_t sa_handler; + compat_old_sigset_t sa_mask; + unsigned int sa_flags; + compat_uptr_t sa_restorer; /* not used by Linux/SPARC yet */ +}; + + + +struct sigaction32 { + compat_uptr_t sa_handler; /* Really a pointer, but need to deal with 32 bits */ + unsigned int sa_flags; + compat_uptr_t sa_restorer; /* Another 32 bit pointer */ + compat_sigset_t sa_mask; /* A 32 bit mask */ +}; + +typedef struct sigaltstack_32 { + unsigned int ss_sp; + int ss_flags; + compat_size_t ss_size; +} stack_32_t; + +struct pt_regs32 { + unsigned int gpr[32]; + unsigned int nip; + unsigned int msr; + unsigned int orig_gpr3; /* Used for restarting system calls */ + unsigned int ctr; + unsigned int link; + unsigned int xer; + unsigned int ccr; + unsigned int mq; /* 601 only (not used at present) */ + unsigned int trap; /* Reason for being here */ + unsigned int dar; /* Fault registers */ + unsigned int dsisr; + unsigned int result; /* Result of a system call */ +}; + +struct sigcontext32 { + unsigned int _unused[4]; + int signal; + compat_uptr_t handler; + unsigned int oldmask; + compat_uptr_t regs; /* 4 byte pointer to the pt_regs32 structure. */ +}; + +struct mcontext32 { + elf_gregset_t32 mc_gregs; + elf_fpregset_t mc_fregs; + unsigned int mc_pad[2]; + elf_vrregset_t32 mc_vregs __attribute__((__aligned__(16))); +}; + +struct ucontext32 { + unsigned int uc_flags; + unsigned int uc_link; + stack_32_t uc_stack; + int uc_pad[7]; + compat_uptr_t uc_regs; /* points to uc_mcontext field */ + compat_sigset_t uc_sigmask; /* mask last for extensibility */ + /* glibc has 1024-bit signal masks, ours are 64-bit */ + int uc_maskext[30]; + int uc_pad2[3]; + struct mcontext32 uc_mcontext; +}; + +#endif /* _PPC64_PPC32_H */ diff --git a/arch/powerpc/kernel/ppc_ksyms.c b/arch/powerpc/kernel/ppc_ksyms.c index 8bc540337ba..47d6f7e2ea9 100644 --- a/arch/powerpc/kernel/ppc_ksyms.c +++ b/arch/powerpc/kernel/ppc_ksyms.c @@ -81,15 +81,6 @@ EXPORT_SYMBOL(_prep_type); EXPORT_SYMBOL(ucSystemType); #endif -#if !defined(__INLINE_BITOPS) -EXPORT_SYMBOL(set_bit); -EXPORT_SYMBOL(clear_bit); -EXPORT_SYMBOL(change_bit); -EXPORT_SYMBOL(test_and_set_bit); -EXPORT_SYMBOL(test_and_clear_bit); -EXPORT_SYMBOL(test_and_change_bit); -#endif /* __INLINE_BITOPS */ - EXPORT_SYMBOL(strcpy); EXPORT_SYMBOL(strncpy); EXPORT_SYMBOL(strcat); diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index 8f85dabe4df..96843211cc5 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -48,8 +48,8 @@ #include <asm/prom.h> #ifdef CONFIG_PPC64 #include <asm/firmware.h> -#include <asm/plpar_wrappers.h> #include <asm/time.h> +#include <asm/machdep.h> #endif extern unsigned long _get_SP(void); @@ -201,27 +201,15 @@ int dump_spe(struct pt_regs *regs, elf_vrregset_t *evrregs) } #endif /* CONFIG_SPE */ -static void set_dabr_spr(unsigned long val) -{ - mtspr(SPRN_DABR, val); -} - int set_dabr(unsigned long dabr) { - int ret = 0; - #ifdef CONFIG_PPC64 - if (firmware_has_feature(FW_FEATURE_XDABR)) { - /* We want to catch accesses from kernel and userspace */ - unsigned long flags = H_DABRX_KERNEL|H_DABRX_USER; - ret = plpar_set_xdabr(dabr, flags); - } else if (firmware_has_feature(FW_FEATURE_DABR)) { - ret = plpar_set_dabr(dabr); - } else + if (ppc_md.set_dabr) + return ppc_md.set_dabr(dabr); #endif - set_dabr_spr(dabr); - return ret; + mtspr(SPRN_DABR, dabr); + return 0; } #ifdef CONFIG_PPC64 diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c index 2eccd0e159e..eec2da69550 100644 --- a/arch/powerpc/kernel/prom.c +++ b/arch/powerpc/kernel/prom.c @@ -1285,7 +1285,7 @@ static int __init early_init_dt_scan_memory(unsigned long node, endp = reg + (l / sizeof(cell_t)); - DBG("memory scan node %s ..., reg size %ld, data: %x %x %x %x, ...\n", + DBG("memory scan node %s, reg size %ld, data: %x %x %x %x,\n", uname, l, reg[0], reg[1], reg[2], reg[3]); while ((endp - reg) >= (dt_root_addr_cells + dt_root_size_cells)) { diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c index 9750b3cd8ec..c758b6624d7 100644 --- a/arch/powerpc/kernel/prom_init.c +++ b/arch/powerpc/kernel/prom_init.c @@ -2000,7 +2000,7 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4, #endif /* - * On pSeries and BPA, copy the CPU hold code + * Copy the CPU hold code */ if (RELOC(of_platform) != PLATFORM_POWERMAC) copy_and_flush(0, KERNELBASE + offset, 0x100, 0); diff --git a/arch/powerpc/kernel/rtas-proc.c b/arch/powerpc/kernel/rtas-proc.c new file mode 100644 index 00000000000..5bdd5b079d9 --- /dev/null +++ b/arch/powerpc/kernel/rtas-proc.c @@ -0,0 +1,808 @@ +/* + * arch/ppc64/kernel/rtas-proc.c + * Copyright (C) 2000 Tilmann Bitterberg + * (tilmann@bitterberg.de) + * + * RTAS (Runtime Abstraction Services) stuff + * Intention is to provide a clean user interface + * to use the RTAS. + * + * TODO: + * Split off a header file and maybe move it to a different + * location. Write Documentation on what the /proc/rtas/ entries + * actually do. + */ + +#include <linux/errno.h> +#include <linux/sched.h> +#include <linux/proc_fs.h> +#include <linux/stat.h> +#include <linux/ctype.h> +#include <linux/time.h> +#include <linux/string.h> +#include <linux/init.h> +#include <linux/seq_file.h> +#include <linux/bitops.h> +#include <linux/rtc.h> + +#include <asm/uaccess.h> +#include <asm/processor.h> +#include <asm/io.h> +#include <asm/prom.h> +#include <asm/rtas.h> +#include <asm/machdep.h> /* for ppc_md */ +#include <asm/time.h> +#include <asm/systemcfg.h> + +/* Token for Sensors */ +#define KEY_SWITCH 0x0001 +#define ENCLOSURE_SWITCH 0x0002 +#define THERMAL_SENSOR 0x0003 +#define LID_STATUS 0x0004 +#define POWER_SOURCE 0x0005 +#define BATTERY_VOLTAGE 0x0006 +#define BATTERY_REMAINING 0x0007 +#define BATTERY_PERCENTAGE 0x0008 +#define EPOW_SENSOR 0x0009 +#define BATTERY_CYCLESTATE 0x000a +#define BATTERY_CHARGING 0x000b + +/* IBM specific sensors */ +#define IBM_SURVEILLANCE 0x2328 /* 9000 */ +#define IBM_FANRPM 0x2329 /* 9001 */ +#define IBM_VOLTAGE 0x232a /* 9002 */ +#define IBM_DRCONNECTOR 0x232b /* 9003 */ +#define IBM_POWERSUPPLY 0x232c /* 9004 */ + +/* Status return values */ +#define SENSOR_CRITICAL_HIGH 13 +#define SENSOR_WARNING_HIGH 12 +#define SENSOR_NORMAL 11 +#define SENSOR_WARNING_LOW 10 +#define SENSOR_CRITICAL_LOW 9 +#define SENSOR_SUCCESS 0 +#define SENSOR_HW_ERROR -1 +#define SENSOR_BUSY -2 +#define SENSOR_NOT_EXIST -3 +#define SENSOR_DR_ENTITY -9000 + +/* Location Codes */ +#define LOC_SCSI_DEV_ADDR 'A' +#define LOC_SCSI_DEV_LOC 'B' +#define LOC_CPU 'C' +#define LOC_DISKETTE 'D' +#define LOC_ETHERNET 'E' +#define LOC_FAN 'F' +#define LOC_GRAPHICS 'G' +/* reserved / not used 'H' */ +#define LOC_IO_ADAPTER 'I' +/* reserved / not used 'J' */ +#define LOC_KEYBOARD 'K' +#define LOC_LCD 'L' +#define LOC_MEMORY 'M' +#define LOC_NV_MEMORY 'N' +#define LOC_MOUSE 'O' +#define LOC_PLANAR 'P' +#define LOC_OTHER_IO 'Q' +#define LOC_PARALLEL 'R' +#define LOC_SERIAL 'S' +#define LOC_DEAD_RING 'T' +#define LOC_RACKMOUNTED 'U' /* for _u_nit is rack mounted */ +#define LOC_VOLTAGE 'V' +#define LOC_SWITCH_ADAPTER 'W' +#define LOC_OTHER 'X' +#define LOC_FIRMWARE 'Y' +#define LOC_SCSI 'Z' + +/* Tokens for indicators */ +#define TONE_FREQUENCY 0x0001 /* 0 - 1000 (HZ)*/ +#define TONE_VOLUME 0x0002 /* 0 - 100 (%) */ +#define SYSTEM_POWER_STATE 0x0003 +#define WARNING_LIGHT 0x0004 +#define DISK_ACTIVITY_LIGHT 0x0005 +#define HEX_DISPLAY_UNIT 0x0006 +#define BATTERY_WARNING_TIME 0x0007 +#define CONDITION_CYCLE_REQUEST 0x0008 +#define SURVEILLANCE_INDICATOR 0x2328 /* 9000 */ +#define DR_ACTION 0x2329 /* 9001 */ +#define DR_INDICATOR 0x232a /* 9002 */ +/* 9003 - 9004: Vendor specific */ +/* 9006 - 9999: Vendor specific */ + +/* other */ +#define MAX_SENSORS 17 /* I only know of 17 sensors */ +#define MAX_LINELENGTH 256 +#define SENSOR_PREFIX "ibm,sensor-" +#define cel_to_fahr(x) ((x*9/5)+32) + + +/* Globals */ +static struct rtas_sensors sensors; +static struct device_node *rtas_node = NULL; +static unsigned long power_on_time = 0; /* Save the time the user set */ +static char progress_led[MAX_LINELENGTH]; + +static unsigned long rtas_tone_frequency = 1000; +static unsigned long rtas_tone_volume = 0; + +/* ****************STRUCTS******************************************* */ +struct individual_sensor { + unsigned int token; + unsigned int quant; +}; + +struct rtas_sensors { + struct individual_sensor sensor[MAX_SENSORS]; + unsigned int quant; +}; + +/* ****************************************************************** */ +/* Declarations */ +static int ppc_rtas_sensors_show(struct seq_file *m, void *v); +static int ppc_rtas_clock_show(struct seq_file *m, void *v); +static ssize_t ppc_rtas_clock_write(struct file *file, + const char __user *buf, size_t count, loff_t *ppos); +static int ppc_rtas_progress_show(struct seq_file *m, void *v); +static ssize_t ppc_rtas_progress_write(struct file *file, + const char __user *buf, size_t count, loff_t *ppos); +static int ppc_rtas_poweron_show(struct seq_file *m, void *v); +static ssize_t ppc_rtas_poweron_write(struct file *file, + const char __user *buf, size_t count, loff_t *ppos); + +static ssize_t ppc_rtas_tone_freq_write(struct file *file, + const char __user *buf, size_t count, loff_t *ppos); +static int ppc_rtas_tone_freq_show(struct seq_file *m, void *v); +static ssize_t ppc_rtas_tone_volume_write(struct file *file, + const char __user *buf, size_t count, loff_t *ppos); +static int ppc_rtas_tone_volume_show(struct seq_file *m, void *v); +static int ppc_rtas_rmo_buf_show(struct seq_file *m, void *v); + +static int sensors_open(struct inode *inode, struct file *file) +{ + return single_open(file, ppc_rtas_sensors_show, NULL); +} + +struct file_operations ppc_rtas_sensors_operations = { + .open = sensors_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static int poweron_open(struct inode *inode, struct file *file) +{ + return single_open(file, ppc_rtas_poweron_show, NULL); +} + +struct file_operations ppc_rtas_poweron_operations = { + .open = poweron_open, + .read = seq_read, + .llseek = seq_lseek, + .write = ppc_rtas_poweron_write, + .release = single_release, +}; + +static int progress_open(struct inode *inode, struct file *file) +{ + return single_open(file, ppc_rtas_progress_show, NULL); +} + +struct file_operations ppc_rtas_progress_operations = { + .open = progress_open, + .read = seq_read, + .llseek = seq_lseek, + .write = ppc_rtas_progress_write, + .release = single_release, +}; + +static int clock_open(struct inode *inode, struct file *file) +{ + return single_open(file, ppc_rtas_clock_show, NULL); +} + +struct file_operations ppc_rtas_clock_operations = { + .open = clock_open, + .read = seq_read, + .llseek = seq_lseek, + .write = ppc_rtas_clock_write, + .release = single_release, +}; + +static int tone_freq_open(struct inode *inode, struct file *file) +{ + return single_open(file, ppc_rtas_tone_freq_show, NULL); +} + +struct file_operations ppc_rtas_tone_freq_operations = { + .open = tone_freq_open, + .read = seq_read, + .llseek = seq_lseek, + .write = ppc_rtas_tone_freq_write, + .release = single_release, +}; + +static int tone_volume_open(struct inode *inode, struct file *file) +{ + return single_open(file, ppc_rtas_tone_volume_show, NULL); +} + +struct file_operations ppc_rtas_tone_volume_operations = { + .open = tone_volume_open, + .read = seq_read, + .llseek = seq_lseek, + .write = ppc_rtas_tone_volume_write, + .release = single_release, +}; + +static int rmo_buf_open(struct inode *inode, struct file *file) +{ + return single_open(file, ppc_rtas_rmo_buf_show, NULL); +} + +struct file_operations ppc_rtas_rmo_buf_ops = { + .open = rmo_buf_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static int ppc_rtas_find_all_sensors(void); +static void ppc_rtas_process_sensor(struct seq_file *m, + struct individual_sensor *s, int state, int error, char *loc); +static char *ppc_rtas_process_error(int error); +static void get_location_code(struct seq_file *m, + struct individual_sensor *s, char *loc); +static void check_location_string(struct seq_file *m, char *c); +static void check_location(struct seq_file *m, char *c); + +static int __init proc_rtas_init(void) +{ + struct proc_dir_entry *entry; + + if (!(systemcfg->platform & PLATFORM_PSERIES)) + return 1; + + rtas_node = of_find_node_by_name(NULL, "rtas"); + if (rtas_node == NULL) + return 1; + + entry = create_proc_entry("ppc64/rtas/progress", S_IRUGO|S_IWUSR, NULL); + if (entry) + entry->proc_fops = &ppc_rtas_progress_operations; + + entry = create_proc_entry("ppc64/rtas/clock", S_IRUGO|S_IWUSR, NULL); + if (entry) + entry->proc_fops = &ppc_rtas_clock_operations; + + entry = create_proc_entry("ppc64/rtas/poweron", S_IWUSR|S_IRUGO, NULL); + if (entry) + entry->proc_fops = &ppc_rtas_poweron_operations; + + entry = create_proc_entry("ppc64/rtas/sensors", S_IRUGO, NULL); + if (entry) + entry->proc_fops = &ppc_rtas_sensors_operations; + + entry = create_proc_entry("ppc64/rtas/frequency", S_IWUSR|S_IRUGO, + NULL); + if (entry) + entry->proc_fops = &ppc_rtas_tone_freq_operations; + + entry = create_proc_entry("ppc64/rtas/volume", S_IWUSR|S_IRUGO, NULL); + if (entry) + entry->proc_fops = &ppc_rtas_tone_volume_operations; + + entry = create_proc_entry("ppc64/rtas/rmo_buffer", S_IRUSR, NULL); + if (entry) + entry->proc_fops = &ppc_rtas_rmo_buf_ops; + + return 0; +} + +__initcall(proc_rtas_init); + +static int parse_number(const char __user *p, size_t count, unsigned long *val) +{ + char buf[40]; + char *end; + + if (count > 39) + return -EINVAL; + + if (copy_from_user(buf, p, count)) + return -EFAULT; + + buf[count] = 0; + + *val = simple_strtoul(buf, &end, 10); + if (*end && *end != '\n') + return -EINVAL; + + return 0; +} + +/* ****************************************************************** */ +/* POWER-ON-TIME */ +/* ****************************************************************** */ +static ssize_t ppc_rtas_poweron_write(struct file *file, + const char __user *buf, size_t count, loff_t *ppos) +{ + struct rtc_time tm; + unsigned long nowtime; + int error = parse_number(buf, count, &nowtime); + if (error) + return error; + + power_on_time = nowtime; /* save the time */ + + to_tm(nowtime, &tm); + + error = rtas_call(rtas_token("set-time-for-power-on"), 7, 1, NULL, + tm.tm_year, tm.tm_mon, tm.tm_mday, + tm.tm_hour, tm.tm_min, tm.tm_sec, 0 /* nano */); + if (error) + printk(KERN_WARNING "error: setting poweron time returned: %s\n", + ppc_rtas_process_error(error)); + return count; +} +/* ****************************************************************** */ +static int ppc_rtas_poweron_show(struct seq_file *m, void *v) +{ + if (power_on_time == 0) + seq_printf(m, "Power on time not set\n"); + else + seq_printf(m, "%lu\n",power_on_time); + return 0; +} + +/* ****************************************************************** */ +/* PROGRESS */ +/* ****************************************************************** */ +static ssize_t ppc_rtas_progress_write(struct file *file, + const char __user *buf, size_t count, loff_t *ppos) +{ + unsigned long hex; + + if (count >= MAX_LINELENGTH) + count = MAX_LINELENGTH -1; + if (copy_from_user(progress_led, buf, count)) { /* save the string */ + return -EFAULT; + } + progress_led[count] = 0; + + /* Lets see if the user passed hexdigits */ + hex = simple_strtoul(progress_led, NULL, 10); + + rtas_progress ((char *)progress_led, hex); + return count; + + /* clear the line */ + /* rtas_progress(" ", 0xffff);*/ +} +/* ****************************************************************** */ +static int ppc_rtas_progress_show(struct seq_file *m, void *v) +{ + if (progress_led) + seq_printf(m, "%s\n", progress_led); + return 0; +} + +/* ****************************************************************** */ +/* CLOCK */ +/* ****************************************************************** */ +static ssize_t ppc_rtas_clock_write(struct file *file, + const char __user *buf, size_t count, loff_t *ppos) +{ + struct rtc_time tm; + unsigned long nowtime; + int error = parse_number(buf, count, &nowtime); + if (error) + return error; + + to_tm(nowtime, &tm); + error = rtas_call(rtas_token("set-time-of-day"), 7, 1, NULL, + tm.tm_year, tm.tm_mon, tm.tm_mday, + tm.tm_hour, tm.tm_min, tm.tm_sec, 0); + if (error) + printk(KERN_WARNING "error: setting the clock returned: %s\n", + ppc_rtas_process_error(error)); + return count; +} +/* ****************************************************************** */ +static int ppc_rtas_clock_show(struct seq_file *m, void *v) +{ + int ret[8]; + int error = rtas_call(rtas_token("get-time-of-day"), 0, 8, ret); + + if (error) { + printk(KERN_WARNING "error: reading the clock returned: %s\n", + ppc_rtas_process_error(error)); + seq_printf(m, "0"); + } else { + unsigned int year, mon, day, hour, min, sec; + year = ret[0]; mon = ret[1]; day = ret[2]; + hour = ret[3]; min = ret[4]; sec = ret[5]; + seq_printf(m, "%lu\n", + mktime(year, mon, day, hour, min, sec)); + } + return 0; +} + +/* ****************************************************************** */ +/* SENSOR STUFF */ +/* ****************************************************************** */ +static int ppc_rtas_sensors_show(struct seq_file *m, void *v) +{ + int i,j; + int state, error; + int get_sensor_state = rtas_token("get-sensor-state"); + + seq_printf(m, "RTAS (RunTime Abstraction Services) Sensor Information\n"); + seq_printf(m, "Sensor\t\tValue\t\tCondition\tLocation\n"); + seq_printf(m, "********************************************************\n"); + + if (ppc_rtas_find_all_sensors() != 0) { + seq_printf(m, "\nNo sensors are available\n"); + return 0; + } + + for (i=0; i<sensors.quant; i++) { + struct individual_sensor *p = &sensors.sensor[i]; + char rstr[64]; + char *loc; + int llen, offs; + + sprintf (rstr, SENSOR_PREFIX"%04d", p->token); + loc = (char *) get_property(rtas_node, rstr, &llen); + + /* A sensor may have multiple instances */ + for (j = 0, offs = 0; j <= p->quant; j++) { + error = rtas_call(get_sensor_state, 2, 2, &state, + p->token, j); + + ppc_rtas_process_sensor(m, p, state, error, loc); + seq_putc(m, '\n'); + if (loc) { + offs += strlen(loc) + 1; + loc += strlen(loc) + 1; + if (offs >= llen) + loc = NULL; + } + } + } + return 0; +} + +/* ****************************************************************** */ + +static int ppc_rtas_find_all_sensors(void) +{ + unsigned int *utmp; + int len, i; + + utmp = (unsigned int *) get_property(rtas_node, "rtas-sensors", &len); + if (utmp == NULL) { + printk (KERN_ERR "error: could not get rtas-sensors\n"); + return 1; + } + + sensors.quant = len / 8; /* int + int */ + + for (i=0; i<sensors.quant; i++) { + sensors.sensor[i].token = *utmp++; + sensors.sensor[i].quant = *utmp++; + } + return 0; +} + +/* ****************************************************************** */ +/* + * Builds a string of what rtas returned + */ +static char *ppc_rtas_process_error(int error) +{ + switch (error) { + case SENSOR_CRITICAL_HIGH: + return "(critical high)"; + case SENSOR_WARNING_HIGH: + return "(warning high)"; + case SENSOR_NORMAL: + return "(normal)"; + case SENSOR_WARNING_LOW: + return "(warning low)"; + case SENSOR_CRITICAL_LOW: + return "(critical low)"; + case SENSOR_SUCCESS: + return "(read ok)"; + case SENSOR_HW_ERROR: + return "(hardware error)"; + case SENSOR_BUSY: + return "(busy)"; + case SENSOR_NOT_EXIST: + return "(non existent)"; + case SENSOR_DR_ENTITY: + return "(dr entity removed)"; + default: + return "(UNKNOWN)"; + } +} + +/* ****************************************************************** */ +/* + * Builds a string out of what the sensor said + */ + +static void ppc_rtas_process_sensor(struct seq_file *m, + struct individual_sensor *s, int state, int error, char *loc) +{ + /* Defined return vales */ + const char * key_switch[] = { "Off\t", "Normal\t", "Secure\t", + "Maintenance" }; + const char * enclosure_switch[] = { "Closed", "Open" }; + const char * lid_status[] = { " ", "Open", "Closed" }; + const char * power_source[] = { "AC\t", "Battery", + "AC & Battery" }; + const char * battery_remaining[] = { "Very Low", "Low", "Mid", "High" }; + const char * epow_sensor[] = { + "EPOW Reset", "Cooling warning", "Power warning", + "System shutdown", "System halt", "EPOW main enclosure", + "EPOW power off" }; + const char * battery_cyclestate[] = { "None", "In progress", + "Requested" }; + const char * battery_charging[] = { "Charging", "Discharching", + "No current flow" }; + const char * ibm_drconnector[] = { "Empty", "Present", "Unusable", + "Exchange" }; + + int have_strings = 0; + int num_states = 0; + int temperature = 0; + int unknown = 0; + + /* What kind of sensor do we have here? */ + + switch (s->token) { + case KEY_SWITCH: + seq_printf(m, "Key switch:\t"); + num_states = sizeof(key_switch) / sizeof(char *); + if (state < num_states) { + seq_printf(m, "%s\t", key_switch[state]); + have_strings = 1; + } + break; + case ENCLOSURE_SWITCH: + seq_printf(m, "Enclosure switch:\t"); + num_states = sizeof(enclosure_switch) / sizeof(char *); + if (state < num_states) { + seq_printf(m, "%s\t", + enclosure_switch[state]); + have_strings = 1; + } + break; + case THERMAL_SENSOR: + seq_printf(m, "Temp. (C/F):\t"); + temperature = 1; + break; + case LID_STATUS: + seq_printf(m, "Lid status:\t"); + num_states = sizeof(lid_status) / sizeof(char *); + if (state < num_states) { + seq_printf(m, "%s\t", lid_status[state]); + have_strings = 1; + } + break; + case POWER_SOURCE: + seq_printf(m, "Power source:\t"); + num_states = sizeof(power_source) / sizeof(char *); + if (state < num_states) { + seq_printf(m, "%s\t", + power_source[state]); + have_strings = 1; + } + break; + case BATTERY_VOLTAGE: + seq_printf(m, "Battery voltage:\t"); + break; + case BATTERY_REMAINING: + seq_printf(m, "Battery remaining:\t"); + num_states = sizeof(battery_remaining) / sizeof(char *); + if (state < num_states) + { + seq_printf(m, "%s\t", + battery_remaining[state]); + have_strings = 1; + } + break; + case BATTERY_PERCENTAGE: + seq_printf(m, "Battery percentage:\t"); + break; + case EPOW_SENSOR: + seq_printf(m, "EPOW Sensor:\t"); + num_states = sizeof(epow_sensor) / sizeof(char *); + if (state < num_states) { + seq_printf(m, "%s\t", epow_sensor[state]); + have_strings = 1; + } + break; + case BATTERY_CYCLESTATE: + seq_printf(m, "Battery cyclestate:\t"); + num_states = sizeof(battery_cyclestate) / + sizeof(char *); + if (state < num_states) { + seq_printf(m, "%s\t", + battery_cyclestate[state]); + have_strings = 1; + } + break; + case BATTERY_CHARGING: + seq_printf(m, "Battery Charging:\t"); + num_states = sizeof(battery_charging) / sizeof(char *); + if (state < num_states) { + seq_printf(m, "%s\t", + battery_charging[state]); + have_strings = 1; + } + break; + case IBM_SURVEILLANCE: + seq_printf(m, "Surveillance:\t"); + break; + case IBM_FANRPM: + seq_printf(m, "Fan (rpm):\t"); + break; + case IBM_VOLTAGE: + seq_printf(m, "Voltage (mv):\t"); + break; + case IBM_DRCONNECTOR: + seq_printf(m, "DR connector:\t"); + num_states = sizeof(ibm_drconnector) / sizeof(char *); + if (state < num_states) { + seq_printf(m, "%s\t", + ibm_drconnector[state]); + have_strings = 1; + } + break; + case IBM_POWERSUPPLY: + seq_printf(m, "Powersupply:\t"); + break; + default: + seq_printf(m, "Unknown sensor (type %d), ignoring it\n", + s->token); + unknown = 1; + have_strings = 1; + break; + } + if (have_strings == 0) { + if (temperature) { + seq_printf(m, "%4d /%4d\t", state, cel_to_fahr(state)); + } else + seq_printf(m, "%10d\t", state); + } + if (unknown == 0) { + seq_printf(m, "%s\t", ppc_rtas_process_error(error)); + get_location_code(m, s, loc); + } +} + +/* ****************************************************************** */ + +static void check_location(struct seq_file *m, char *c) +{ + switch (c[0]) { + case LOC_PLANAR: + seq_printf(m, "Planar #%c", c[1]); + break; + case LOC_CPU: + seq_printf(m, "CPU #%c", c[1]); + break; + case LOC_FAN: + seq_printf(m, "Fan #%c", c[1]); + break; + case LOC_RACKMOUNTED: + seq_printf(m, "Rack #%c", c[1]); + break; + case LOC_VOLTAGE: + seq_printf(m, "Voltage #%c", c[1]); + break; + case LOC_LCD: + seq_printf(m, "LCD #%c", c[1]); + break; + case '.': + seq_printf(m, "- %c", c[1]); + break; + default: + seq_printf(m, "Unknown location"); + break; + } +} + + +/* ****************************************************************** */ +/* + * Format: + * ${LETTER}${NUMBER}[[-/]${LETTER}${NUMBER} [ ... ] ] + * the '.' may be an abbrevation + */ +static void check_location_string(struct seq_file *m, char *c) +{ + while (*c) { + if (isalpha(*c) || *c == '.') + check_location(m, c); + else if (*c == '/' || *c == '-') + seq_printf(m, " at "); + c++; + } +} + + +/* ****************************************************************** */ + +static void get_location_code(struct seq_file *m, struct individual_sensor *s, char *loc) +{ + if (!loc || !*loc) { + seq_printf(m, "---");/* does not have a location */ + } else { + check_location_string(m, loc); + } + seq_putc(m, ' '); +} +/* ****************************************************************** */ +/* INDICATORS - Tone Frequency */ +/* ****************************************************************** */ +static ssize_t ppc_rtas_tone_freq_write(struct file *file, + const char __user *buf, size_t count, loff_t *ppos) +{ + unsigned long freq; + int error = parse_number(buf, count, &freq); + if (error) + return error; + + rtas_tone_frequency = freq; /* save it for later */ + error = rtas_call(rtas_token("set-indicator"), 3, 1, NULL, + TONE_FREQUENCY, 0, freq); + if (error) + printk(KERN_WARNING "error: setting tone frequency returned: %s\n", + ppc_rtas_process_error(error)); + return count; +} +/* ****************************************************************** */ +static int ppc_rtas_tone_freq_show(struct seq_file *m, void *v) +{ + seq_printf(m, "%lu\n", rtas_tone_frequency); + return 0; +} +/* ****************************************************************** */ +/* INDICATORS - Tone Volume */ +/* ****************************************************************** */ +static ssize_t ppc_rtas_tone_volume_write(struct file *file, + const char __user *buf, size_t count, loff_t *ppos) +{ + unsigned long volume; + int error = parse_number(buf, count, &volume); + if (error) + return error; + + if (volume > 100) + volume = 100; + + rtas_tone_volume = volume; /* save it for later */ + error = rtas_call(rtas_token("set-indicator"), 3, 1, NULL, + TONE_VOLUME, 0, volume); + if (error) + printk(KERN_WARNING "error: setting tone volume returned: %s\n", + ppc_rtas_process_error(error)); + return count; +} +/* ****************************************************************** */ +static int ppc_rtas_tone_volume_show(struct seq_file *m, void *v) +{ + seq_printf(m, "%lu\n", rtas_tone_volume); + return 0; +} + +#define RMO_READ_BUF_MAX 30 + +/* RTAS Userspace access */ +static int ppc_rtas_rmo_buf_show(struct seq_file *m, void *v) +{ + seq_printf(m, "%016lx %x\n", rtas_rmo_buf, RTAS_RMOBUF_MAX); + return 0; +} diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c index 4d22eeeeb91..b7fc2d88495 100644 --- a/arch/powerpc/kernel/rtas.c +++ b/arch/powerpc/kernel/rtas.c @@ -43,6 +43,13 @@ char rtas_data_buf[RTAS_DATA_BUF_SIZE] __cacheline_aligned; unsigned long rtas_rmo_buf; /* + * If non-NULL, this gets called when the kernel terminates. + * This is done like this so rtas_flash can be a module. + */ +void (*rtas_flash_term_hook)(int); +EXPORT_SYMBOL(rtas_flash_term_hook); + +/* * call_rtas_display_status and call_rtas_display_status_delay * are designed only for very early low-level debugging, which * is why the token is hard-coded to 10. @@ -206,6 +213,7 @@ void rtas_progress(char *s, unsigned short hex) spin_unlock(&progress_lock); } +EXPORT_SYMBOL(rtas_progress); /* needed by rtas_flash module */ int rtas_token(const char *service) { @@ -492,6 +500,8 @@ int rtas_set_indicator(int indicator, int index, int new_value) void rtas_restart(char *cmd) { + if (rtas_flash_term_hook) + rtas_flash_term_hook(SYS_RESTART); printk("RTAS system-reboot returned %d\n", rtas_call(rtas_token("system-reboot"), 0, 1, NULL)); for (;;); @@ -499,6 +509,8 @@ void rtas_restart(char *cmd) void rtas_power_off(void) { + if (rtas_flash_term_hook) + rtas_flash_term_hook(SYS_POWER_OFF); /* allow power on only with power button press */ printk("RTAS power-off returned %d\n", rtas_call(rtas_token("power-off"), 2, 1, NULL, -1, -1)); @@ -507,7 +519,12 @@ void rtas_power_off(void) void rtas_halt(void) { - rtas_power_off(); + if (rtas_flash_term_hook) + rtas_flash_term_hook(SYS_HALT); + /* allow power on only with power button press */ + printk("RTAS power-off returned %d\n", + rtas_call(rtas_token("power-off"), 2, 1, NULL, -1, -1)); + for (;;); } /* Must be in the RMO region, so we place it here */ diff --git a/arch/powerpc/kernel/rtas_flash.c b/arch/powerpc/kernel/rtas_flash.c new file mode 100644 index 00000000000..50500093c97 --- /dev/null +++ b/arch/powerpc/kernel/rtas_flash.c @@ -0,0 +1,834 @@ +/* + * c 2001 PPC 64 Team, IBM Corp + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * /proc/ppc64/rtas/firmware_flash interface + * + * This file implements a firmware_flash interface to pump a firmware + * image into the kernel. At reboot time rtas_restart() will see the + * firmware image and flash it as it reboots (see rtas.c). + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/proc_fs.h> +#include <asm/delay.h> +#include <asm/uaccess.h> +#include <asm/rtas.h> +#include <asm/abs_addr.h> + +#define MODULE_VERS "1.0" +#define MODULE_NAME "rtas_flash" + +#define FIRMWARE_FLASH_NAME "firmware_flash" +#define FIRMWARE_UPDATE_NAME "firmware_update" +#define MANAGE_FLASH_NAME "manage_flash" +#define VALIDATE_FLASH_NAME "validate_flash" + +/* General RTAS Status Codes */ +#define RTAS_RC_SUCCESS 0 +#define RTAS_RC_HW_ERR -1 +#define RTAS_RC_BUSY -2 + +/* Flash image status values */ +#define FLASH_AUTH -9002 /* RTAS Not Service Authority Partition */ +#define FLASH_NO_OP -1099 /* No operation initiated by user */ +#define FLASH_IMG_SHORT -1005 /* Flash image shorter than expected */ +#define FLASH_IMG_BAD_LEN -1004 /* Bad length value in flash list block */ +#define FLASH_IMG_NULL_DATA -1003 /* Bad data value in flash list block */ +#define FLASH_IMG_READY 0 /* Firmware img ready for flash on reboot */ + +/* Manage image status values */ +#define MANAGE_AUTH -9002 /* RTAS Not Service Authority Partition */ +#define MANAGE_ACTIVE_ERR -9001 /* RTAS Cannot Overwrite Active Img */ +#define MANAGE_NO_OP -1099 /* No operation initiated by user */ +#define MANAGE_PARAM_ERR -3 /* RTAS Parameter Error */ +#define MANAGE_HW_ERR -1 /* RTAS Hardware Error */ + +/* Validate image status values */ +#define VALIDATE_AUTH -9002 /* RTAS Not Service Authority Partition */ +#define VALIDATE_NO_OP -1099 /* No operation initiated by the user */ +#define VALIDATE_INCOMPLETE -1002 /* User copied < VALIDATE_BUF_SIZE */ +#define VALIDATE_READY -1001 /* Firmware image ready for validation */ +#define VALIDATE_PARAM_ERR -3 /* RTAS Parameter Error */ +#define VALIDATE_HW_ERR -1 /* RTAS Hardware Error */ +#define VALIDATE_TMP_UPDATE 0 /* Validate Return Status */ +#define VALIDATE_FLASH_AUTH 1 /* Validate Return Status */ +#define VALIDATE_INVALID_IMG 2 /* Validate Return Status */ +#define VALIDATE_CUR_UNKNOWN 3 /* Validate Return Status */ +#define VALIDATE_TMP_COMMIT_DL 4 /* Validate Return Status */ +#define VALIDATE_TMP_COMMIT 5 /* Validate Return Status */ +#define VALIDATE_TMP_UPDATE_DL 6 /* Validate Return Status */ + +/* ibm,manage-flash-image operation tokens */ +#define RTAS_REJECT_TMP_IMG 0 +#define RTAS_COMMIT_TMP_IMG 1 + +/* Array sizes */ +#define VALIDATE_BUF_SIZE 4096 +#define RTAS_MSG_MAXLEN 64 + +struct flash_block { + char *data; + unsigned long length; +}; + +/* This struct is very similar but not identical to + * that needed by the rtas flash update. + * All we need to do for rtas is rewrite num_blocks + * into a version/length and translate the pointers + * to absolute. + */ +#define FLASH_BLOCKS_PER_NODE ((PAGE_SIZE - 16) / sizeof(struct flash_block)) +struct flash_block_list { + unsigned long num_blocks; + struct flash_block_list *next; + struct flash_block blocks[FLASH_BLOCKS_PER_NODE]; +}; +struct flash_block_list_header { /* just the header of flash_block_list */ + unsigned long num_blocks; + struct flash_block_list *next; +}; + +static struct flash_block_list_header rtas_firmware_flash_list = {0, NULL}; + +#define FLASH_BLOCK_LIST_VERSION (1UL) + +/* Local copy of the flash block list. + * We only allow one open of the flash proc file and create this + * list as we go. This list will be put in the + * rtas_firmware_flash_list var once it is fully read. + * + * For convenience as we build the list we use virtual addrs, + * we do not fill in the version number, and the length field + * is treated as the number of entries currently in the block + * (i.e. not a byte count). This is all fixed on release. + */ + +/* Status int must be first member of struct */ +struct rtas_update_flash_t +{ + int status; /* Flash update status */ + struct flash_block_list *flist; /* Local copy of flash block list */ +}; + +/* Status int must be first member of struct */ +struct rtas_manage_flash_t +{ + int status; /* Returned status */ + unsigned int op; /* Reject or commit image */ +}; + +/* Status int must be first member of struct */ +struct rtas_validate_flash_t +{ + int status; /* Returned status */ + char buf[VALIDATE_BUF_SIZE]; /* Candidate image buffer */ + unsigned int buf_size; /* Size of image buf */ + unsigned int update_results; /* Update results token */ +}; + +static DEFINE_SPINLOCK(flash_file_open_lock); +static struct proc_dir_entry *firmware_flash_pde; +static struct proc_dir_entry *firmware_update_pde; +static struct proc_dir_entry *validate_pde; +static struct proc_dir_entry *manage_pde; + +/* Do simple sanity checks on the flash image. */ +static int flash_list_valid(struct flash_block_list *flist) +{ + struct flash_block_list *f; + int i; + unsigned long block_size, image_size; + + /* Paranoid self test here. We also collect the image size. */ + image_size = 0; + for (f = flist; f; f = f->next) { + for (i = 0; i < f->num_blocks; i++) { + if (f->blocks[i].data == NULL) { + return FLASH_IMG_NULL_DATA; + } + block_size = f->blocks[i].length; + if (block_size <= 0 || block_size > PAGE_SIZE) { + return FLASH_IMG_BAD_LEN; + } + image_size += block_size; + } + } + + if (image_size < (256 << 10)) { + if (image_size < 2) + return FLASH_NO_OP; + } + + printk(KERN_INFO "FLASH: flash image with %ld bytes stored for hardware flash on reboot\n", image_size); + + return FLASH_IMG_READY; +} + +static void free_flash_list(struct flash_block_list *f) +{ + struct flash_block_list *next; + int i; + + while (f) { + for (i = 0; i < f->num_blocks; i++) + free_page((unsigned long)(f->blocks[i].data)); + next = f->next; + free_page((unsigned long)f); + f = next; + } +} + +static int rtas_flash_release(struct inode *inode, struct file *file) +{ + struct proc_dir_entry *dp = PDE(file->f_dentry->d_inode); + struct rtas_update_flash_t *uf; + + uf = (struct rtas_update_flash_t *) dp->data; + if (uf->flist) { + /* File was opened in write mode for a new flash attempt */ + /* Clear saved list */ + if (rtas_firmware_flash_list.next) { + free_flash_list(rtas_firmware_flash_list.next); + rtas_firmware_flash_list.next = NULL; + } + + if (uf->status != FLASH_AUTH) + uf->status = flash_list_valid(uf->flist); + + if (uf->status == FLASH_IMG_READY) + rtas_firmware_flash_list.next = uf->flist; + else + free_flash_list(uf->flist); + + uf->flist = NULL; + } + + atomic_dec(&dp->count); + return 0; +} + +static void get_flash_status_msg(int status, char *buf) +{ + char *msg; + + switch (status) { + case FLASH_AUTH: + msg = "error: this partition does not have service authority\n"; + break; + case FLASH_NO_OP: + msg = "info: no firmware image for flash\n"; + break; + case FLASH_IMG_SHORT: + msg = "error: flash image short\n"; + break; + case FLASH_IMG_BAD_LEN: + msg = "error: internal error bad length\n"; + break; + case FLASH_IMG_NULL_DATA: + msg = "error: internal error null data\n"; + break; + case FLASH_IMG_READY: + msg = "ready: firmware image ready for flash on reboot\n"; + break; + default: + sprintf(buf, "error: unexpected status value %d\n", status); + return; + } + + strcpy(buf, msg); +} + +/* Reading the proc file will show status (not the firmware contents) */ +static ssize_t rtas_flash_read(struct file *file, char __user *buf, + size_t count, loff_t *ppos) +{ + struct proc_dir_entry *dp = PDE(file->f_dentry->d_inode); + struct rtas_update_flash_t *uf; + char msg[RTAS_MSG_MAXLEN]; + int msglen; + + uf = (struct rtas_update_flash_t *) dp->data; + + if (!strcmp(dp->name, FIRMWARE_FLASH_NAME)) { + get_flash_status_msg(uf->status, msg); + } else { /* FIRMWARE_UPDATE_NAME */ + sprintf(msg, "%d\n", uf->status); + } + msglen = strlen(msg); + if (msglen > count) + msglen = count; + + if (ppos && *ppos != 0) + return 0; /* be cheap */ + + if (!access_ok(VERIFY_WRITE, buf, msglen)) + return -EINVAL; + + if (copy_to_user(buf, msg, msglen)) + return -EFAULT; + + if (ppos) + *ppos = msglen; + return msglen; +} + +/* We could be much more efficient here. But to keep this function + * simple we allocate a page to the block list no matter how small the + * count is. If the system is low on memory it will be just as well + * that we fail.... + */ +static ssize_t rtas_flash_write(struct file *file, const char __user *buffer, + size_t count, loff_t *off) +{ + struct proc_dir_entry *dp = PDE(file->f_dentry->d_inode); + struct rtas_update_flash_t *uf; + char *p; + int next_free; + struct flash_block_list *fl; + + uf = (struct rtas_update_flash_t *) dp->data; + + if (uf->status == FLASH_AUTH || count == 0) + return count; /* discard data */ + + /* In the case that the image is not ready for flashing, the memory + * allocated for the block list will be freed upon the release of the + * proc file + */ + if (uf->flist == NULL) { + uf->flist = (struct flash_block_list *) get_zeroed_page(GFP_KERNEL); + if (!uf->flist) + return -ENOMEM; + } + + fl = uf->flist; + while (fl->next) + fl = fl->next; /* seek to last block_list for append */ + next_free = fl->num_blocks; + if (next_free == FLASH_BLOCKS_PER_NODE) { + /* Need to allocate another block_list */ + fl->next = (struct flash_block_list *)get_zeroed_page(GFP_KERNEL); + if (!fl->next) + return -ENOMEM; + fl = fl->next; + next_free = 0; + } + + if (count > PAGE_SIZE) + count = PAGE_SIZE; + p = (char *)get_zeroed_page(GFP_KERNEL); + if (!p) + return -ENOMEM; + + if(copy_from_user(p, buffer, count)) { + free_page((unsigned long)p); + return -EFAULT; + } + fl->blocks[next_free].data = p; + fl->blocks[next_free].length = count; + fl->num_blocks++; + + return count; +} + +static int rtas_excl_open(struct inode *inode, struct file *file) +{ + struct proc_dir_entry *dp = PDE(inode); + + /* Enforce exclusive open with use count of PDE */ + spin_lock(&flash_file_open_lock); + if (atomic_read(&dp->count) > 1) { + spin_unlock(&flash_file_open_lock); + return -EBUSY; + } + + atomic_inc(&dp->count); + spin_unlock(&flash_file_open_lock); + + return 0; +} + +static int rtas_excl_release(struct inode *inode, struct file *file) +{ + struct proc_dir_entry *dp = PDE(inode); + + atomic_dec(&dp->count); + + return 0; +} + +static void manage_flash(struct rtas_manage_flash_t *args_buf) +{ + unsigned int wait_time; + s32 rc; + + while (1) { + rc = rtas_call(rtas_token("ibm,manage-flash-image"), 1, + 1, NULL, args_buf->op); + if (rc == RTAS_RC_BUSY) + udelay(1); + else if (rtas_is_extended_busy(rc)) { + wait_time = rtas_extended_busy_delay_time(rc); + udelay(wait_time * 1000); + } else + break; + } + + args_buf->status = rc; +} + +static ssize_t manage_flash_read(struct file *file, char __user *buf, + size_t count, loff_t *ppos) +{ + struct proc_dir_entry *dp = PDE(file->f_dentry->d_inode); + struct rtas_manage_flash_t *args_buf; + char msg[RTAS_MSG_MAXLEN]; + int msglen; + + args_buf = (struct rtas_manage_flash_t *) dp->data; + if (args_buf == NULL) + return 0; + + msglen = sprintf(msg, "%d\n", args_buf->status); + if (msglen > count) + msglen = count; + + if (ppos && *ppos != 0) + return 0; /* be cheap */ + + if (!access_ok(VERIFY_WRITE, buf, msglen)) + return -EINVAL; + + if (copy_to_user(buf, msg, msglen)) + return -EFAULT; + + if (ppos) + *ppos = msglen; + return msglen; +} + +static ssize_t manage_flash_write(struct file *file, const char __user *buf, + size_t count, loff_t *off) +{ + struct proc_dir_entry *dp = PDE(file->f_dentry->d_inode); + struct rtas_manage_flash_t *args_buf; + const char reject_str[] = "0"; + const char commit_str[] = "1"; + char stkbuf[10]; + int op; + + args_buf = (struct rtas_manage_flash_t *) dp->data; + if ((args_buf->status == MANAGE_AUTH) || (count == 0)) + return count; + + op = -1; + if (buf) { + if (count > 9) count = 9; + if (copy_from_user (stkbuf, buf, count)) { + return -EFAULT; + } + if (strncmp(stkbuf, reject_str, strlen(reject_str)) == 0) + op = RTAS_REJECT_TMP_IMG; + else if (strncmp(stkbuf, commit_str, strlen(commit_str)) == 0) + op = RTAS_COMMIT_TMP_IMG; + } + + if (op == -1) /* buf is empty, or contains invalid string */ + return -EINVAL; + + args_buf->op = op; + manage_flash(args_buf); + + return count; +} + +static void validate_flash(struct rtas_validate_flash_t *args_buf) +{ + int token = rtas_token("ibm,validate-flash-image"); + unsigned int wait_time; + int update_results; + s32 rc; + + rc = 0; + while(1) { + spin_lock(&rtas_data_buf_lock); + memcpy(rtas_data_buf, args_buf->buf, VALIDATE_BUF_SIZE); + rc = rtas_call(token, 2, 2, &update_results, + (u32) __pa(rtas_data_buf), args_buf->buf_size); + memcpy(args_buf->buf, rtas_data_buf, VALIDATE_BUF_SIZE); + spin_unlock(&rtas_data_buf_lock); + + if (rc == RTAS_RC_BUSY) + udelay(1); + else if (rtas_is_extended_busy(rc)) { + wait_time = rtas_extended_busy_delay_time(rc); + udelay(wait_time * 1000); + } else + break; + } + + args_buf->status = rc; + args_buf->update_results = update_results; +} + +static int get_validate_flash_msg(struct rtas_validate_flash_t *args_buf, + char *msg) +{ + int n; + + if (args_buf->status >= VALIDATE_TMP_UPDATE) { + n = sprintf(msg, "%d\n", args_buf->update_results); + if ((args_buf->update_results >= VALIDATE_CUR_UNKNOWN) || + (args_buf->update_results == VALIDATE_TMP_UPDATE)) + n += sprintf(msg + n, "%s\n", args_buf->buf); + } else { + n = sprintf(msg, "%d\n", args_buf->status); + } + return n; +} + +static ssize_t validate_flash_read(struct file *file, char __user *buf, + size_t count, loff_t *ppos) +{ + struct proc_dir_entry *dp = PDE(file->f_dentry->d_inode); + struct rtas_validate_flash_t *args_buf; + char msg[RTAS_MSG_MAXLEN]; + int msglen; + + args_buf = (struct rtas_validate_flash_t *) dp->data; + + if (ppos && *ppos != 0) + return 0; /* be cheap */ + + msglen = get_validate_flash_msg(args_buf, msg); + if (msglen > count) + msglen = count; + + if (!access_ok(VERIFY_WRITE, buf, msglen)) + return -EINVAL; + + if (copy_to_user(buf, msg, msglen)) + return -EFAULT; + + if (ppos) + *ppos = msglen; + return msglen; +} + +static ssize_t validate_flash_write(struct file *file, const char __user *buf, + size_t count, loff_t *off) +{ + struct proc_dir_entry *dp = PDE(file->f_dentry->d_inode); + struct rtas_validate_flash_t *args_buf; + int rc; + + args_buf = (struct rtas_validate_flash_t *) dp->data; + + if (dp->data == NULL) { + dp->data = kmalloc(sizeof(struct rtas_validate_flash_t), + GFP_KERNEL); + if (dp->data == NULL) + return -ENOMEM; + } + + /* We are only interested in the first 4K of the + * candidate image */ + if ((*off >= VALIDATE_BUF_SIZE) || + (args_buf->status == VALIDATE_AUTH)) { + *off += count; + return count; + } + + if (*off + count >= VALIDATE_BUF_SIZE) { + count = VALIDATE_BUF_SIZE - *off; + args_buf->status = VALIDATE_READY; + } else { + args_buf->status = VALIDATE_INCOMPLETE; + } + + if (!access_ok(VERIFY_READ, buf, count)) { + rc = -EFAULT; + goto done; + } + if (copy_from_user(args_buf->buf + *off, buf, count)) { + rc = -EFAULT; + goto done; + } + + *off += count; + rc = count; +done: + if (rc < 0) { + kfree(dp->data); + dp->data = NULL; + } + return rc; +} + +static int validate_flash_release(struct inode *inode, struct file *file) +{ + struct proc_dir_entry *dp = PDE(file->f_dentry->d_inode); + struct rtas_validate_flash_t *args_buf; + + args_buf = (struct rtas_validate_flash_t *) dp->data; + + if (args_buf->status == VALIDATE_READY) { + args_buf->buf_size = VALIDATE_BUF_SIZE; + validate_flash(args_buf); + } + + /* The matching atomic_inc was in rtas_excl_open() */ + atomic_dec(&dp->count); + + return 0; +} + +static void rtas_flash_firmware(int reboot_type) +{ + unsigned long image_size; + struct flash_block_list *f, *next, *flist; + unsigned long rtas_block_list; + int i, status, update_token; + + if (rtas_firmware_flash_list.next == NULL) + return; /* nothing to do */ + + if (reboot_type != SYS_RESTART) { + printk(KERN_ALERT "FLASH: firmware flash requires a reboot\n"); + printk(KERN_ALERT "FLASH: the firmware image will NOT be flashed\n"); + return; + } + + update_token = rtas_token("ibm,update-flash-64-and-reboot"); + if (update_token == RTAS_UNKNOWN_SERVICE) { + printk(KERN_ALERT "FLASH: ibm,update-flash-64-and-reboot " + "is not available -- not a service partition?\n"); + printk(KERN_ALERT "FLASH: firmware will not be flashed\n"); + return; + } + + /* NOTE: the "first" block list is a global var with no data + * blocks in the kernel data segment. We do this because + * we want to ensure this block_list addr is under 4GB. + */ + rtas_firmware_flash_list.num_blocks = 0; + flist = (struct flash_block_list *)&rtas_firmware_flash_list; + rtas_block_list = virt_to_abs(flist); + if (rtas_block_list >= 4UL*1024*1024*1024) { + printk(KERN_ALERT "FLASH: kernel bug...flash list header addr above 4GB\n"); + return; + } + + printk(KERN_ALERT "FLASH: preparing saved firmware image for flash\n"); + /* Update the block_list in place. */ + image_size = 0; + for (f = flist; f; f = next) { + /* Translate data addrs to absolute */ + for (i = 0; i < f->num_blocks; i++) { + f->blocks[i].data = (char *)virt_to_abs(f->blocks[i].data); + image_size += f->blocks[i].length; + } + next = f->next; + /* Don't translate NULL pointer for last entry */ + if (f->next) + f->next = (struct flash_block_list *)virt_to_abs(f->next); + else + f->next = NULL; + /* make num_blocks into the version/length field */ + f->num_blocks = (FLASH_BLOCK_LIST_VERSION << 56) | ((f->num_blocks+1)*16); + } + + printk(KERN_ALERT "FLASH: flash image is %ld bytes\n", image_size); + printk(KERN_ALERT "FLASH: performing flash and reboot\n"); + rtas_progress("Flashing \n", 0x0); + rtas_progress("Please Wait... ", 0x0); + printk(KERN_ALERT "FLASH: this will take several minutes. Do not power off!\n"); + status = rtas_call(update_token, 1, 1, NULL, rtas_block_list); + switch (status) { /* should only get "bad" status */ + case 0: + printk(KERN_ALERT "FLASH: success\n"); + break; + case -1: + printk(KERN_ALERT "FLASH: hardware error. Firmware may not be not flashed\n"); + break; + case -3: + printk(KERN_ALERT "FLASH: image is corrupt or not correct for this platform. Firmware not flashed\n"); + break; + case -4: + printk(KERN_ALERT "FLASH: flash failed when partially complete. System may not reboot\n"); + break; + default: + printk(KERN_ALERT "FLASH: unknown flash return code %d\n", status); + break; + } +} + +static void remove_flash_pde(struct proc_dir_entry *dp) +{ + if (dp) { + if (dp->data != NULL) + kfree(dp->data); + dp->owner = NULL; + remove_proc_entry(dp->name, dp->parent); + } +} + +static int initialize_flash_pde_data(const char *rtas_call_name, + size_t buf_size, + struct proc_dir_entry *dp) +{ + int *status; + int token; + + dp->data = kmalloc(buf_size, GFP_KERNEL); + if (dp->data == NULL) { + remove_flash_pde(dp); + return -ENOMEM; + } + + memset(dp->data, 0, buf_size); + + /* + * This code assumes that the status int is the first member of the + * struct + */ + status = (int *) dp->data; + token = rtas_token(rtas_call_name); + if (token == RTAS_UNKNOWN_SERVICE) + *status = FLASH_AUTH; + else + *status = FLASH_NO_OP; + + return 0; +} + +static struct proc_dir_entry *create_flash_pde(const char *filename, + struct file_operations *fops) +{ + struct proc_dir_entry *ent = NULL; + + ent = create_proc_entry(filename, S_IRUSR | S_IWUSR, NULL); + if (ent != NULL) { + ent->nlink = 1; + ent->proc_fops = fops; + ent->owner = THIS_MODULE; + } + + return ent; +} + +static struct file_operations rtas_flash_operations = { + .read = rtas_flash_read, + .write = rtas_flash_write, + .open = rtas_excl_open, + .release = rtas_flash_release, +}; + +static struct file_operations manage_flash_operations = { + .read = manage_flash_read, + .write = manage_flash_write, + .open = rtas_excl_open, + .release = rtas_excl_release, +}; + +static struct file_operations validate_flash_operations = { + .read = validate_flash_read, + .write = validate_flash_write, + .open = rtas_excl_open, + .release = validate_flash_release, +}; + +int __init rtas_flash_init(void) +{ + int rc; + + if (rtas_token("ibm,update-flash-64-and-reboot") == + RTAS_UNKNOWN_SERVICE) { + printk(KERN_ERR "rtas_flash: no firmware flash support\n"); + return 1; + } + + firmware_flash_pde = create_flash_pde("ppc64/rtas/" + FIRMWARE_FLASH_NAME, + &rtas_flash_operations); + if (firmware_flash_pde == NULL) { + rc = -ENOMEM; + goto cleanup; + } + + rc = initialize_flash_pde_data("ibm,update-flash-64-and-reboot", + sizeof(struct rtas_update_flash_t), + firmware_flash_pde); + if (rc != 0) + goto cleanup; + + firmware_update_pde = create_flash_pde("ppc64/rtas/" + FIRMWARE_UPDATE_NAME, + &rtas_flash_operations); + if (firmware_update_pde == NULL) { + rc = -ENOMEM; + goto cleanup; + } + + rc = initialize_flash_pde_data("ibm,update-flash-64-and-reboot", + sizeof(struct rtas_update_flash_t), + firmware_update_pde); + if (rc != 0) + goto cleanup; + + validate_pde = create_flash_pde("ppc64/rtas/" VALIDATE_FLASH_NAME, + &validate_flash_operations); + if (validate_pde == NULL) { + rc = -ENOMEM; + goto cleanup; + } + + rc = initialize_flash_pde_data("ibm,validate-flash-image", + sizeof(struct rtas_validate_flash_t), + validate_pde); + if (rc != 0) + goto cleanup; + + manage_pde = create_flash_pde("ppc64/rtas/" MANAGE_FLASH_NAME, + &manage_flash_operations); + if (manage_pde == NULL) { + rc = -ENOMEM; + goto cleanup; + } + + rc = initialize_flash_pde_data("ibm,manage-flash-image", + sizeof(struct rtas_manage_flash_t), + manage_pde); + if (rc != 0) + goto cleanup; + + rtas_flash_term_hook = rtas_flash_firmware; + return 0; + +cleanup: + remove_flash_pde(firmware_flash_pde); + remove_flash_pde(firmware_update_pde); + remove_flash_pde(validate_pde); + remove_flash_pde(manage_pde); + + return rc; +} + +void __exit rtas_flash_cleanup(void) +{ + rtas_flash_term_hook = NULL; + remove_flash_pde(firmware_flash_pde); + remove_flash_pde(firmware_update_pde); + remove_flash_pde(validate_pde); + remove_flash_pde(manage_pde); +} + +module_init(rtas_flash_init); +module_exit(rtas_flash_cleanup); +MODULE_LICENSE("GPL"); diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c index 1292460fcde..d43fa8c0e5a 100644 --- a/arch/powerpc/kernel/setup-common.c +++ b/arch/powerpc/kernel/setup-common.c @@ -170,12 +170,8 @@ static int show_cpuinfo(struct seq_file *m, void *v) } #ifdef CONFIG_SMP -#ifdef CONFIG_PPC64 /* XXX for now */ pvr = per_cpu(pvr, cpu_id); #else - pvr = cpu_data[cpu_id].pvr; -#endif -#else pvr = mfspr(SPRN_PVR); #endif maj = (pvr >> 8) & 0xFF; @@ -201,11 +197,11 @@ static int show_cpuinfo(struct seq_file *m, void *v) #ifdef CONFIG_TAU_AVERAGE /* more straightforward, but potentially misleading */ seq_printf(m, "temperature \t: %u C (uncalibrated)\n", - cpu_temp(i)); + cpu_temp(cpu_id)); #else /* show the actual temp sensor range */ u32 temp; - temp = cpu_temp_both(i); + temp = cpu_temp_both(cpu_id); seq_printf(m, "temperature \t: %u-%u C (uncalibrated)\n", temp & 0xff, temp >> 16); #endif @@ -408,3 +404,118 @@ static int __init set_preferred_console(void) } console_initcall(set_preferred_console); #endif /* CONFIG_PPC_MULTIPLATFORM */ + +#ifdef CONFIG_SMP + +/** + * setup_cpu_maps - initialize the following cpu maps: + * cpu_possible_map + * cpu_present_map + * cpu_sibling_map + * + * Having the possible map set up early allows us to restrict allocations + * of things like irqstacks to num_possible_cpus() rather than NR_CPUS. + * + * We do not initialize the online map here; cpus set their own bits in + * cpu_online_map as they come up. + * + * This function is valid only for Open Firmware systems. finish_device_tree + * must be called before using this. + * + * While we're here, we may as well set the "physical" cpu ids in the paca. + */ +void __init smp_setup_cpu_maps(void) +{ + struct device_node *dn = NULL; + int cpu = 0; + int swap_cpuid = 0; + + while ((dn = of_find_node_by_type(dn, "cpu")) && cpu < NR_CPUS) { + int *intserv; + int j, len = sizeof(u32), nthreads = 1; + + intserv = (int *)get_property(dn, "ibm,ppc-interrupt-server#s", + &len); + if (intserv) + nthreads = len / sizeof(int); + else { + intserv = (int *) get_property(dn, "reg", NULL); + if (!intserv) + intserv = &cpu; /* assume logical == phys */ + } + + for (j = 0; j < nthreads && cpu < NR_CPUS; j++) { + cpu_set(cpu, cpu_present_map); + set_hard_smp_processor_id(cpu, intserv[j]); + + if (intserv[j] == boot_cpuid_phys) + swap_cpuid = cpu; + cpu_set(cpu, cpu_possible_map); + cpu++; + } + } + + /* Swap CPU id 0 with boot_cpuid_phys, so we can always assume that + * boot cpu is logical 0. + */ + if (boot_cpuid_phys != get_hard_smp_processor_id(0)) { + u32 tmp; + tmp = get_hard_smp_processor_id(0); + set_hard_smp_processor_id(0, boot_cpuid_phys); + set_hard_smp_processor_id(swap_cpuid, tmp); + } + +#ifdef CONFIG_PPC64 + /* + * On pSeries LPAR, we need to know how many cpus + * could possibly be added to this partition. + */ + if (systemcfg->platform == PLATFORM_PSERIES_LPAR && + (dn = of_find_node_by_path("/rtas"))) { + int num_addr_cell, num_size_cell, maxcpus; + unsigned int *ireg; + + num_addr_cell = prom_n_addr_cells(dn); + num_size_cell = prom_n_size_cells(dn); + + ireg = (unsigned int *) + get_property(dn, "ibm,lrdr-capacity", NULL); + + if (!ireg) + goto out; + + maxcpus = ireg[num_addr_cell + num_size_cell]; + + /* Double maxcpus for processors which have SMT capability */ + if (cpu_has_feature(CPU_FTR_SMT)) + maxcpus *= 2; + + if (maxcpus > NR_CPUS) { + printk(KERN_WARNING + "Partition configured for %d cpus, " + "operating system maximum is %d.\n", + maxcpus, NR_CPUS); + maxcpus = NR_CPUS; + } else + printk(KERN_INFO "Partition configured for %d cpus.\n", + maxcpus); + + for (cpu = 0; cpu < maxcpus; cpu++) + cpu_set(cpu, cpu_possible_map); + out: + of_node_put(dn); + } + + /* + * Do the sibling map; assume only two threads per processor. + */ + for_each_cpu(cpu) { + cpu_set(cpu, cpu_sibling_map[cpu]); + if (cpu_has_feature(CPU_FTR_SMT)) + cpu_set(cpu ^ 0x1, cpu_sibling_map[cpu]); + } + + systemcfg->processorCount = num_present_cpus(); +#endif /* CONFIG_PPC64 */ +} +#endif /* CONFIG_SMP */ diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c index 9680ae99b08..b45eedbb4b3 100644 --- a/arch/powerpc/kernel/setup_32.c +++ b/arch/powerpc/kernel/setup_32.c @@ -288,6 +288,8 @@ void __init setup_arch(char **cmdline_p) unflatten_device_tree(); finish_device_tree(); + smp_setup_cpu_maps(); + #ifdef CONFIG_BOOTX_TEXT init_boot_display(); #endif diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index 40c48100bf1..6b52cce872b 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -56,7 +56,7 @@ #include <asm/page.h> #include <asm/mmu.h> #include <asm/lmb.h> -#include <asm/iSeries/ItLpNaca.h> +#include <asm/iseries/it_lp_naca.h> #include <asm/firmware.h> #include <asm/systemcfg.h> #include <asm/xmon.h> @@ -103,8 +103,6 @@ extern void htab_initialize(void); extern void early_init_devtree(void *flat_dt); extern void unflatten_device_tree(void); -extern void smp_release_cpus(void); - int have_of = 1; int boot_cpuid = 0; int boot_cpuid_phys = 0; @@ -183,120 +181,14 @@ static int __init early_smt_enabled(char *p) } early_param("smt-enabled", early_smt_enabled); -/** - * setup_cpu_maps - initialize the following cpu maps: - * cpu_possible_map - * cpu_present_map - * cpu_sibling_map - * - * Having the possible map set up early allows us to restrict allocations - * of things like irqstacks to num_possible_cpus() rather than NR_CPUS. - * - * We do not initialize the online map here; cpus set their own bits in - * cpu_online_map as they come up. - * - * This function is valid only for Open Firmware systems. finish_device_tree - * must be called before using this. - * - * While we're here, we may as well set the "physical" cpu ids in the paca. - */ -static void __init setup_cpu_maps(void) -{ - struct device_node *dn = NULL; - int cpu = 0; - int swap_cpuid = 0; - - check_smt_enabled(); - - while ((dn = of_find_node_by_type(dn, "cpu")) && cpu < NR_CPUS) { - u32 *intserv; - int j, len = sizeof(u32), nthreads; - - intserv = (u32 *)get_property(dn, "ibm,ppc-interrupt-server#s", - &len); - if (!intserv) - intserv = (u32 *)get_property(dn, "reg", NULL); - - nthreads = len / sizeof(u32); - - for (j = 0; j < nthreads && cpu < NR_CPUS; j++) { - cpu_set(cpu, cpu_present_map); - set_hard_smp_processor_id(cpu, intserv[j]); - - if (intserv[j] == boot_cpuid_phys) - swap_cpuid = cpu; - cpu_set(cpu, cpu_possible_map); - cpu++; - } - } - - /* Swap CPU id 0 with boot_cpuid_phys, so we can always assume that - * boot cpu is logical 0. - */ - if (boot_cpuid_phys != get_hard_smp_processor_id(0)) { - u32 tmp; - tmp = get_hard_smp_processor_id(0); - set_hard_smp_processor_id(0, boot_cpuid_phys); - set_hard_smp_processor_id(swap_cpuid, tmp); - } - - /* - * On pSeries LPAR, we need to know how many cpus - * could possibly be added to this partition. - */ - if (systemcfg->platform == PLATFORM_PSERIES_LPAR && - (dn = of_find_node_by_path("/rtas"))) { - int num_addr_cell, num_size_cell, maxcpus; - unsigned int *ireg; - - num_addr_cell = prom_n_addr_cells(dn); - num_size_cell = prom_n_size_cells(dn); - - ireg = (unsigned int *) - get_property(dn, "ibm,lrdr-capacity", NULL); - - if (!ireg) - goto out; - - maxcpus = ireg[num_addr_cell + num_size_cell]; - - /* Double maxcpus for processors which have SMT capability */ - if (cpu_has_feature(CPU_FTR_SMT)) - maxcpus *= 2; - - if (maxcpus > NR_CPUS) { - printk(KERN_WARNING - "Partition configured for %d cpus, " - "operating system maximum is %d.\n", - maxcpus, NR_CPUS); - maxcpus = NR_CPUS; - } else - printk(KERN_INFO "Partition configured for %d cpus.\n", - maxcpus); - - for (cpu = 0; cpu < maxcpus; cpu++) - cpu_set(cpu, cpu_possible_map); - out: - of_node_put(dn); - } - - /* - * Do the sibling map; assume only two threads per processor. - */ - for_each_cpu(cpu) { - cpu_set(cpu, cpu_sibling_map[cpu]); - if (cpu_has_feature(CPU_FTR_SMT)) - cpu_set(cpu ^ 0x1, cpu_sibling_map[cpu]); - } - - systemcfg->processorCount = num_present_cpus(); -} +#else +#define check_smt_enabled() #endif /* CONFIG_SMP */ extern struct machdep_calls pSeries_md; extern struct machdep_calls pmac_md; extern struct machdep_calls maple_md; -extern struct machdep_calls bpa_md; +extern struct machdep_calls cell_md; extern struct machdep_calls iseries_md; /* Ultimately, stuff them in an elf section like initcalls... */ @@ -310,8 +202,8 @@ static struct machdep_calls __initdata *machines[] = { #ifdef CONFIG_PPC_MAPLE &maple_md, #endif /* CONFIG_PPC_MAPLE */ -#ifdef CONFIG_PPC_BPA - &bpa_md, +#ifdef CONFIG_PPC_CELL + &cell_md, #endif #ifdef CONFIG_PPC_ISERIES &iseries_md, @@ -400,6 +292,29 @@ void __init early_setup(unsigned long dt_ptr) } +#if defined(CONFIG_SMP) || defined(CONFIG_KEXEC) +void smp_release_cpus(void) +{ + extern unsigned long __secondary_hold_spinloop; + + DBG(" -> smp_release_cpus()\n"); + + /* All secondary cpus are spinning on a common spinloop, release them + * all now so they can start to spin on their individual paca + * spinloops. For non SMP kernels, the secondary cpus never get out + * of the common spinloop. + * This is useless but harmless on iSeries, secondaries are already + * waiting on their paca spinloops. */ + + __secondary_hold_spinloop = 1; + mb(); + + DBG(" <- smp_release_cpus()\n"); +} +#else +#define smp_release_cpus() +#endif /* CONFIG_SMP || CONFIG_KEXEC */ + /* * Initialize some remaining members of the ppc64_caches and systemcfg structures * (at least until we get rid of them completely). This is mostly some @@ -589,17 +504,13 @@ void __init setup_system(void) parse_early_param(); -#ifdef CONFIG_SMP - /* - * iSeries has already initialized the cpu maps at this point. - */ - setup_cpu_maps(); + check_smt_enabled(); + smp_setup_cpu_maps(); /* Release secondary cpus out of their spinloops at 0x60 now that * we can map physical -> logical CPU ids */ smp_release_cpus(); -#endif printk("Starting Linux PPC64 %s\n", system_utsname.version); @@ -631,23 +542,6 @@ static int ppc64_panic_event(struct notifier_block *this, return NOTIFY_DONE; } -#ifdef CONFIG_PPC_ISERIES -/* - * On iSeries we just parse the mem=X option from the command line. - * On pSeries it's a bit more complicated, see prom_init_mem() - */ -static int __init early_parsemem(char *p) -{ - if (!p) - return 0; - - memory_limit = ALIGN(memparse(p, &p), PAGE_SIZE); - - return 0; -} -early_param("mem", early_parsemem); -#endif /* CONFIG_PPC_ISERIES */ - #ifdef CONFIG_IRQSTACKS static void __init irqstack_early_init(void) { diff --git a/arch/powerpc/kernel/signal_32.c b/arch/powerpc/kernel/signal_32.c index 444c3e81884..876c57c1136 100644 --- a/arch/powerpc/kernel/signal_32.c +++ b/arch/powerpc/kernel/signal_32.c @@ -43,7 +43,7 @@ #include <asm/uaccess.h> #include <asm/cacheflush.h> #ifdef CONFIG_PPC64 -#include <asm/ppc32.h> +#include "ppc32.h" #include <asm/ppcdebug.h> #include <asm/unistd.h> #include <asm/vdso.h> diff --git a/arch/powerpc/kernel/signal_64.c b/arch/powerpc/kernel/signal_64.c new file mode 100644 index 00000000000..ec9d0984b6a --- /dev/null +++ b/arch/powerpc/kernel/signal_64.c @@ -0,0 +1,581 @@ +/* + * linux/arch/ppc64/kernel/signal.c + * + * PowerPC version + * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) + * + * Derived from "arch/i386/kernel/signal.c" + * Copyright (C) 1991, 1992 Linus Torvalds + * 1997-11-28 Modified for POSIX.1b signals by Richard Henderson + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <linux/config.h> +#include <linux/sched.h> +#include <linux/mm.h> +#include <linux/smp.h> +#include <linux/smp_lock.h> +#include <linux/kernel.h> +#include <linux/signal.h> +#include <linux/errno.h> +#include <linux/wait.h> +#include <linux/unistd.h> +#include <linux/stddef.h> +#include <linux/elf.h> +#include <linux/ptrace.h> +#include <linux/module.h> + +#include <asm/sigcontext.h> +#include <asm/ucontext.h> +#include <asm/uaccess.h> +#include <asm/pgtable.h> +#include <asm/ppcdebug.h> +#include <asm/unistd.h> +#include <asm/cacheflush.h> +#include <asm/vdso.h> + +#define DEBUG_SIG 0 + +#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP))) + +#define GP_REGS_SIZE min(sizeof(elf_gregset_t), sizeof(struct pt_regs)) +#define FP_REGS_SIZE sizeof(elf_fpregset_t) + +#define TRAMP_TRACEBACK 3 +#define TRAMP_SIZE 6 + +/* + * When we have signals to deliver, we set up on the user stack, + * going down from the original stack pointer: + * 1) a rt_sigframe struct which contains the ucontext + * 2) a gap of __SIGNAL_FRAMESIZE bytes which acts as a dummy caller + * frame for the signal handler. + */ + +struct rt_sigframe { + /* sys_rt_sigreturn requires the ucontext be the first field */ + struct ucontext uc; + unsigned long _unused[2]; + unsigned int tramp[TRAMP_SIZE]; + struct siginfo *pinfo; + void *puc; + struct siginfo info; + /* 64 bit ABI allows for 288 bytes below sp before decrementing it. */ + char abigap[288]; +} __attribute__ ((aligned (16))); + + +/* + * Atomically swap in the new signal mask, and wait for a signal. + */ +long sys_rt_sigsuspend(sigset_t __user *unewset, size_t sigsetsize, int p3, int p4, + int p6, int p7, struct pt_regs *regs) +{ + sigset_t saveset, newset; + + /* XXX: Don't preclude handling different sized sigset_t's. */ + if (sigsetsize != sizeof(sigset_t)) + return -EINVAL; + + if (copy_from_user(&newset, unewset, sizeof(newset))) + return -EFAULT; + sigdelsetmask(&newset, ~_BLOCKABLE); + + spin_lock_irq(¤t->sighand->siglock); + saveset = current->blocked; + current->blocked = newset; + recalc_sigpending(); + spin_unlock_irq(¤t->sighand->siglock); + + regs->result = -EINTR; + regs->gpr[3] = EINTR; + regs->ccr |= 0x10000000; + while (1) { + current->state = TASK_INTERRUPTIBLE; + schedule(); + if (do_signal(&saveset, regs)) + return 0; + } +} + +long sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss, unsigned long r5, + unsigned long r6, unsigned long r7, unsigned long r8, + struct pt_regs *regs) +{ + return do_sigaltstack(uss, uoss, regs->gpr[1]); +} + + +/* + * Set up the sigcontext for the signal frame. + */ + +static long setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs, + int signr, sigset_t *set, unsigned long handler) +{ + /* When CONFIG_ALTIVEC is set, we _always_ setup v_regs even if the + * process never used altivec yet (MSR_VEC is zero in pt_regs of + * the context). This is very important because we must ensure we + * don't lose the VRSAVE content that may have been set prior to + * the process doing its first vector operation + * Userland shall check AT_HWCAP to know wether it can rely on the + * v_regs pointer or not + */ +#ifdef CONFIG_ALTIVEC + elf_vrreg_t __user *v_regs = (elf_vrreg_t __user *)(((unsigned long)sc->vmx_reserve + 15) & ~0xful); +#endif + long err = 0; + + flush_fp_to_thread(current); + + /* Make sure signal doesn't get spurrious FP exceptions */ + current->thread.fpscr.val = 0; + +#ifdef CONFIG_ALTIVEC + err |= __put_user(v_regs, &sc->v_regs); + + /* save altivec registers */ + if (current->thread.used_vr) { + flush_altivec_to_thread(current); + /* Copy 33 vec registers (vr0..31 and vscr) to the stack */ + err |= __copy_to_user(v_regs, current->thread.vr, 33 * sizeof(vector128)); + /* set MSR_VEC in the MSR value in the frame to indicate that sc->v_reg) + * contains valid data. + */ + regs->msr |= MSR_VEC; + } + /* We always copy to/from vrsave, it's 0 if we don't have or don't + * use altivec. + */ + err |= __put_user(current->thread.vrsave, (u32 __user *)&v_regs[33]); +#else /* CONFIG_ALTIVEC */ + err |= __put_user(0, &sc->v_regs); +#endif /* CONFIG_ALTIVEC */ + err |= __put_user(&sc->gp_regs, &sc->regs); + err |= __copy_to_user(&sc->gp_regs, regs, GP_REGS_SIZE); + err |= __copy_to_user(&sc->fp_regs, ¤t->thread.fpr, FP_REGS_SIZE); + err |= __put_user(signr, &sc->signal); + err |= __put_user(handler, &sc->handler); + if (set != NULL) + err |= __put_user(set->sig[0], &sc->oldmask); + + return err; +} + +/* + * Restore the sigcontext from the signal frame. + */ + +static long restore_sigcontext(struct pt_regs *regs, sigset_t *set, int sig, + struct sigcontext __user *sc) +{ +#ifdef CONFIG_ALTIVEC + elf_vrreg_t __user *v_regs; +#endif + unsigned long err = 0; + unsigned long save_r13 = 0; + elf_greg_t *gregs = (elf_greg_t *)regs; +#ifdef CONFIG_ALTIVEC + unsigned long msr; +#endif + int i; + + /* If this is not a signal return, we preserve the TLS in r13 */ + if (!sig) + save_r13 = regs->gpr[13]; + + /* copy everything before MSR */ + err |= __copy_from_user(regs, &sc->gp_regs, + PT_MSR*sizeof(unsigned long)); + + /* skip MSR and SOFTE */ + for (i = PT_MSR+1; i <= PT_RESULT; i++) { + if (i == PT_SOFTE) + continue; + err |= __get_user(gregs[i], &sc->gp_regs[i]); + } + + if (!sig) + regs->gpr[13] = save_r13; + err |= __copy_from_user(¤t->thread.fpr, &sc->fp_regs, FP_REGS_SIZE); + if (set != NULL) + err |= __get_user(set->sig[0], &sc->oldmask); + +#ifdef CONFIG_ALTIVEC + err |= __get_user(v_regs, &sc->v_regs); + err |= __get_user(msr, &sc->gp_regs[PT_MSR]); + if (err) + return err; + /* Copy 33 vec registers (vr0..31 and vscr) from the stack */ + if (v_regs != 0 && (msr & MSR_VEC) != 0) + err |= __copy_from_user(current->thread.vr, v_regs, + 33 * sizeof(vector128)); + else if (current->thread.used_vr) + memset(current->thread.vr, 0, 33 * sizeof(vector128)); + /* Always get VRSAVE back */ + if (v_regs != 0) + err |= __get_user(current->thread.vrsave, (u32 __user *)&v_regs[33]); + else + current->thread.vrsave = 0; +#endif /* CONFIG_ALTIVEC */ + +#ifndef CONFIG_SMP + preempt_disable(); + if (last_task_used_math == current) + last_task_used_math = NULL; + if (last_task_used_altivec == current) + last_task_used_altivec = NULL; + preempt_enable(); +#endif + /* Force reload of FP/VEC */ + regs->msr &= ~(MSR_FP | MSR_FE0 | MSR_FE1 | MSR_VEC); + + return err; +} + +/* + * Allocate space for the signal frame + */ +static inline void __user * get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, + size_t frame_size) +{ + unsigned long newsp; + + /* Default to using normal stack */ + newsp = regs->gpr[1]; + + if (ka->sa.sa_flags & SA_ONSTACK) { + if (! on_sig_stack(regs->gpr[1])) + newsp = (current->sas_ss_sp + current->sas_ss_size); + } + + return (void __user *)((newsp - frame_size) & -16ul); +} + +/* + * Setup the trampoline code on the stack + */ +static long setup_trampoline(unsigned int syscall, unsigned int __user *tramp) +{ + int i; + long err = 0; + + /* addi r1, r1, __SIGNAL_FRAMESIZE # Pop the dummy stackframe */ + err |= __put_user(0x38210000UL | (__SIGNAL_FRAMESIZE & 0xffff), &tramp[0]); + /* li r0, __NR_[rt_]sigreturn| */ + err |= __put_user(0x38000000UL | (syscall & 0xffff), &tramp[1]); + /* sc */ + err |= __put_user(0x44000002UL, &tramp[2]); + + /* Minimal traceback info */ + for (i=TRAMP_TRACEBACK; i < TRAMP_SIZE ;i++) + err |= __put_user(0, &tramp[i]); + + if (!err) + flush_icache_range((unsigned long) &tramp[0], + (unsigned long) &tramp[TRAMP_SIZE]); + + return err; +} + +/* + * Restore the user process's signal mask (also used by signal32.c) + */ +void restore_sigmask(sigset_t *set) +{ + sigdelsetmask(set, ~_BLOCKABLE); + spin_lock_irq(¤t->sighand->siglock); + current->blocked = *set; + recalc_sigpending(); + spin_unlock_irq(¤t->sighand->siglock); +} + + +/* + * Handle {get,set,swap}_context operations + */ +int sys_swapcontext(struct ucontext __user *old_ctx, + struct ucontext __user *new_ctx, + long ctx_size, long r6, long r7, long r8, struct pt_regs *regs) +{ + unsigned char tmp; + sigset_t set; + + /* Context size is for future use. Right now, we only make sure + * we are passed something we understand + */ + if (ctx_size < sizeof(struct ucontext)) + return -EINVAL; + + if (old_ctx != NULL) { + if (!access_ok(VERIFY_WRITE, old_ctx, sizeof(*old_ctx)) + || setup_sigcontext(&old_ctx->uc_mcontext, regs, 0, NULL, 0) + || __copy_to_user(&old_ctx->uc_sigmask, + ¤t->blocked, sizeof(sigset_t))) + return -EFAULT; + } + if (new_ctx == NULL) + return 0; + if (!access_ok(VERIFY_READ, new_ctx, sizeof(*new_ctx)) + || __get_user(tmp, (u8 __user *) new_ctx) + || __get_user(tmp, (u8 __user *) (new_ctx + 1) - 1)) + return -EFAULT; + + /* + * If we get a fault copying the context into the kernel's + * image of the user's registers, we can't just return -EFAULT + * because the user's registers will be corrupted. For instance + * the NIP value may have been updated but not some of the + * other registers. Given that we have done the access_ok + * and successfully read the first and last bytes of the region + * above, this should only happen in an out-of-memory situation + * or if another thread unmaps the region containing the context. + * We kill the task with a SIGSEGV in this situation. + */ + + if (__copy_from_user(&set, &new_ctx->uc_sigmask, sizeof(set))) + do_exit(SIGSEGV); + restore_sigmask(&set); + if (restore_sigcontext(regs, NULL, 0, &new_ctx->uc_mcontext)) + do_exit(SIGSEGV); + + /* This returns like rt_sigreturn */ + return 0; +} + + +/* + * Do a signal return; undo the signal stack. + */ + +int sys_rt_sigreturn(unsigned long r3, unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7, unsigned long r8, + struct pt_regs *regs) +{ + struct ucontext __user *uc = (struct ucontext __user *)regs->gpr[1]; + sigset_t set; + + /* Always make any pending restarted system calls return -EINTR */ + current_thread_info()->restart_block.fn = do_no_restart_syscall; + + if (!access_ok(VERIFY_READ, uc, sizeof(*uc))) + goto badframe; + + if (__copy_from_user(&set, &uc->uc_sigmask, sizeof(set))) + goto badframe; + restore_sigmask(&set); + if (restore_sigcontext(regs, NULL, 1, &uc->uc_mcontext)) + goto badframe; + + /* do_sigaltstack expects a __user pointer and won't modify + * what's in there anyway + */ + do_sigaltstack(&uc->uc_stack, NULL, regs->gpr[1]); + + return regs->result; + +badframe: +#if DEBUG_SIG + printk("badframe in sys_rt_sigreturn, regs=%p uc=%p &uc->uc_mcontext=%p\n", + regs, uc, &uc->uc_mcontext); +#endif + force_sig(SIGSEGV, current); + return 0; +} + +static int setup_rt_frame(int signr, struct k_sigaction *ka, siginfo_t *info, + sigset_t *set, struct pt_regs *regs) +{ + /* Handler is *really* a pointer to the function descriptor for + * the signal routine. The first entry in the function + * descriptor is the entry address of signal and the second + * entry is the TOC value we need to use. + */ + func_descr_t __user *funct_desc_ptr; + struct rt_sigframe __user *frame; + unsigned long newsp = 0; + long err = 0; + + frame = get_sigframe(ka, regs, sizeof(*frame)); + + if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame))) + goto badframe; + + err |= __put_user(&frame->info, &frame->pinfo); + err |= __put_user(&frame->uc, &frame->puc); + err |= copy_siginfo_to_user(&frame->info, info); + if (err) + goto badframe; + + /* Create the ucontext. */ + err |= __put_user(0, &frame->uc.uc_flags); + err |= __put_user(0, &frame->uc.uc_link); + err |= __put_user(current->sas_ss_sp, &frame->uc.uc_stack.ss_sp); + err |= __put_user(sas_ss_flags(regs->gpr[1]), + &frame->uc.uc_stack.ss_flags); + err |= __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size); + err |= setup_sigcontext(&frame->uc.uc_mcontext, regs, signr, NULL, + (unsigned long)ka->sa.sa_handler); + err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set)); + if (err) + goto badframe; + + /* Set up to return from userspace. */ + if (vdso64_rt_sigtramp && current->thread.vdso_base) { + regs->link = current->thread.vdso_base + vdso64_rt_sigtramp; + } else { + err |= setup_trampoline(__NR_rt_sigreturn, &frame->tramp[0]); + if (err) + goto badframe; + regs->link = (unsigned long) &frame->tramp[0]; + } + funct_desc_ptr = (func_descr_t __user *) ka->sa.sa_handler; + + /* Allocate a dummy caller frame for the signal handler. */ + newsp = (unsigned long)frame - __SIGNAL_FRAMESIZE; + err |= put_user(regs->gpr[1], (unsigned long __user *)newsp); + + /* Set up "regs" so we "return" to the signal handler. */ + err |= get_user(regs->nip, &funct_desc_ptr->entry); + regs->gpr[1] = newsp; + err |= get_user(regs->gpr[2], &funct_desc_ptr->toc); + regs->gpr[3] = signr; + regs->result = 0; + if (ka->sa.sa_flags & SA_SIGINFO) { + err |= get_user(regs->gpr[4], (unsigned long __user *)&frame->pinfo); + err |= get_user(regs->gpr[5], (unsigned long __user *)&frame->puc); + regs->gpr[6] = (unsigned long) frame; + } else { + regs->gpr[4] = (unsigned long)&frame->uc.uc_mcontext; + } + if (err) + goto badframe; + + if (test_thread_flag(TIF_SINGLESTEP)) + ptrace_notify(SIGTRAP); + + return 1; + +badframe: +#if DEBUG_SIG + printk("badframe in setup_rt_frame, regs=%p frame=%p newsp=%lx\n", + regs, frame, newsp); +#endif + force_sigsegv(signr, current); + return 0; +} + + +/* + * OK, we're invoking a handler + */ +static int handle_signal(unsigned long sig, struct k_sigaction *ka, + siginfo_t *info, sigset_t *oldset, struct pt_regs *regs) +{ + int ret; + + /* Set up Signal Frame */ + ret = setup_rt_frame(sig, ka, info, oldset, regs); + + if (ret) { + spin_lock_irq(¤t->sighand->siglock); + sigorsets(¤t->blocked, ¤t->blocked, &ka->sa.sa_mask); + if (!(ka->sa.sa_flags & SA_NODEFER)) + sigaddset(¤t->blocked,sig); + recalc_sigpending(); + spin_unlock_irq(¤t->sighand->siglock); + } + + return ret; +} + +static inline void syscall_restart(struct pt_regs *regs, struct k_sigaction *ka) +{ + switch ((int)regs->result) { + case -ERESTART_RESTARTBLOCK: + case -ERESTARTNOHAND: + /* ERESTARTNOHAND means that the syscall should only be + * restarted if there was no handler for the signal, and since + * we only get here if there is a handler, we dont restart. + */ + regs->result = -EINTR; + break; + case -ERESTARTSYS: + /* ERESTARTSYS means to restart the syscall if there is no + * handler or the handler was registered with SA_RESTART + */ + if (!(ka->sa.sa_flags & SA_RESTART)) { + regs->result = -EINTR; + break; + } + /* fallthrough */ + case -ERESTARTNOINTR: + /* ERESTARTNOINTR means that the syscall should be + * called again after the signal handler returns. + */ + regs->gpr[3] = regs->orig_gpr3; + regs->nip -= 4; + regs->result = 0; + break; + } +} + +/* + * Note that 'init' is a special process: it doesn't get signals it doesn't + * want to handle. Thus you cannot kill init even with a SIGKILL even by + * mistake. + */ +int do_signal(sigset_t *oldset, struct pt_regs *regs) +{ + siginfo_t info; + int signr; + struct k_sigaction ka; + + /* + * If the current thread is 32 bit - invoke the + * 32 bit signal handling code + */ + if (test_thread_flag(TIF_32BIT)) + return do_signal32(oldset, regs); + + if (!oldset) + oldset = ¤t->blocked; + + signr = get_signal_to_deliver(&info, &ka, regs, NULL); + if (signr > 0) { + /* Whee! Actually deliver the signal. */ + if (TRAP(regs) == 0x0C00) + syscall_restart(regs, &ka); + + /* + * Reenable the DABR before delivering the signal to + * user space. The DABR will have been cleared if it + * triggered inside the kernel. + */ + if (current->thread.dabr) + set_dabr(current->thread.dabr); + + return handle_signal(signr, &ka, &info, oldset, regs); + } + + if (TRAP(regs) == 0x0C00) { /* System Call! */ + if ((int)regs->result == -ERESTARTNOHAND || + (int)regs->result == -ERESTARTSYS || + (int)regs->result == -ERESTARTNOINTR) { + regs->gpr[3] = regs->orig_gpr3; + regs->nip -= 4; /* Back up & retry system call */ + regs->result = 0; + } else if ((int)regs->result == -ERESTART_RESTARTBLOCK) { + regs->gpr[0] = __NR_restart_syscall; + regs->nip -= 4; + regs->result = 0; + } + } + + return 0; +} +EXPORT_SYMBOL(do_signal); diff --git a/arch/powerpc/kernel/smp-tbsync.c b/arch/powerpc/kernel/smp-tbsync.c new file mode 100644 index 00000000000..9adef3bddad --- /dev/null +++ b/arch/powerpc/kernel/smp-tbsync.c @@ -0,0 +1,171 @@ +/* + * Smp timebase synchronization for ppc. + * + * Copyright (C) 2003 Samuel Rydh (samuel@ibrium.se) + * + */ + +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/smp.h> +#include <linux/unistd.h> +#include <linux/init.h> +#include <asm/atomic.h> +#include <asm/smp.h> +#include <asm/time.h> + +#define NUM_ITER 300 + +enum { + kExit=0, kSetAndTest, kTest +}; + +static struct { + volatile u64 tb; + volatile u64 mark; + volatile int cmd; + volatile int handshake; + int filler[2]; + + volatile int ack; + int filler2[7]; + + volatile int race_result; +} *tbsync; + +static volatile int running; + +static void __devinit enter_contest(u64 mark, long add) +{ + while (get_tb() < mark) + tbsync->race_result = add; +} + +void __devinit smp_generic_take_timebase(void) +{ + int cmd; + u64 tb; + + local_irq_disable(); + while (!running) + barrier(); + rmb(); + + for (;;) { + tbsync->ack = 1; + while (!tbsync->handshake) + barrier(); + rmb(); + + cmd = tbsync->cmd; + tb = tbsync->tb; + mb(); + tbsync->ack = 0; + if (cmd == kExit) + break; + + while (tbsync->handshake) + barrier(); + if (cmd == kSetAndTest) + set_tb(tb >> 32, tb & 0xfffffffful); + enter_contest(tbsync->mark, -1); + } + local_irq_enable(); +} + +static int __devinit start_contest(int cmd, long offset, int num) +{ + int i, score=0; + u64 tb; + long mark; + + tbsync->cmd = cmd; + + local_irq_disable(); + for (i = -3; i < num; ) { + tb = get_tb() + 400; + tbsync->tb = tb + offset; + tbsync->mark = mark = tb + 400; + + wmb(); + + tbsync->handshake = 1; + while (tbsync->ack) + barrier(); + + while (get_tb() <= tb) + barrier(); + tbsync->handshake = 0; + enter_contest(mark, 1); + + while (!tbsync->ack) + barrier(); + + if (i++ > 0) + score += tbsync->race_result; + } + local_irq_enable(); + return score; +} + +void __devinit smp_generic_give_timebase(void) +{ + int i, score, score2, old, min=0, max=5000, offset=1000; + + printk("Synchronizing timebase\n"); + + /* if this fails then this kernel won't work anyway... */ + tbsync = kmalloc( sizeof(*tbsync), GFP_KERNEL ); + memset( tbsync, 0, sizeof(*tbsync) ); + mb(); + running = 1; + + while (!tbsync->ack) + barrier(); + + printk("Got ack\n"); + + /* binary search */ + for (old = -1; old != offset ; offset = (min+max) / 2) { + score = start_contest(kSetAndTest, offset, NUM_ITER); + + printk("score %d, offset %d\n", score, offset ); + + if( score > 0 ) + max = offset; + else + min = offset; + old = offset; + } + score = start_contest(kSetAndTest, min, NUM_ITER); + score2 = start_contest(kSetAndTest, max, NUM_ITER); + + printk("Min %d (score %d), Max %d (score %d)\n", + min, score, max, score2); + score = abs(score); + score2 = abs(score2); + offset = (score < score2) ? min : max; + + /* guard against inaccurate mttb */ + for (i = 0; i < 10; i++) { + start_contest(kSetAndTest, offset, NUM_ITER/10); + + if ((score2 = start_contest(kTest, offset, NUM_ITER)) < 0) + score2 = -score2; + if (score2 <= score || score2 < 20) + break; + } + printk("Final offset: %d (%d/%d)\n", offset, score2, NUM_ITER ); + + /* exiting */ + tbsync->cmd = kExit; + wmb(); + tbsync->handshake = 1; + while (tbsync->ack) + barrier(); + tbsync->handshake = 0; + kfree(tbsync); + tbsync = NULL; + running = 0; +} diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c new file mode 100644 index 00000000000..1794a694a92 --- /dev/null +++ b/arch/powerpc/kernel/smp.c @@ -0,0 +1,565 @@ +/* + * SMP support for ppc. + * + * Written by Cort Dougan (cort@cs.nmt.edu) borrowing a great + * deal of code from the sparc and intel versions. + * + * Copyright (C) 1999 Cort Dougan <cort@cs.nmt.edu> + * + * PowerPC-64 Support added by Dave Engebretsen, Peter Bergner, and + * Mike Corrigan {engebret|bergner|mikec}@us.ibm.com + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#undef DEBUG + +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/sched.h> +#include <linux/smp.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/spinlock.h> +#include <linux/cache.h> +#include <linux/err.h> +#include <linux/sysdev.h> +#include <linux/cpu.h> +#include <linux/notifier.h> + +#include <asm/ptrace.h> +#include <asm/atomic.h> +#include <asm/irq.h> +#include <asm/page.h> +#include <asm/pgtable.h> +#include <asm/prom.h> +#include <asm/smp.h> +#include <asm/time.h> +#include <asm/xmon.h> +#include <asm/machdep.h> +#include <asm/cputable.h> +#include <asm/system.h> +#include <asm/mpic.h> +#ifdef CONFIG_PPC64 +#include <asm/paca.h> +#endif + +int smp_hw_index[NR_CPUS]; +struct thread_info *secondary_ti; + +#ifdef DEBUG +#define DBG(fmt...) udbg_printf(fmt) +#else +#define DBG(fmt...) +#endif + +cpumask_t cpu_possible_map = CPU_MASK_NONE; +cpumask_t cpu_online_map = CPU_MASK_NONE; +cpumask_t cpu_sibling_map[NR_CPUS] = { [0 ... NR_CPUS-1] = CPU_MASK_NONE }; + +EXPORT_SYMBOL(cpu_online_map); +EXPORT_SYMBOL(cpu_possible_map); + +/* SMP operations for this machine */ +struct smp_ops_t *smp_ops; + +static volatile unsigned int cpu_callin_map[NR_CPUS]; + +void smp_call_function_interrupt(void); + +int smt_enabled_at_boot = 1; + +#ifdef CONFIG_MPIC +int __init smp_mpic_probe(void) +{ + int nr_cpus; + + DBG("smp_mpic_probe()...\n"); + + nr_cpus = cpus_weight(cpu_possible_map); + + DBG("nr_cpus: %d\n", nr_cpus); + + if (nr_cpus > 1) + mpic_request_ipis(); + + return nr_cpus; +} + +void __devinit smp_mpic_setup_cpu(int cpu) +{ + mpic_setup_this_cpu(); +} +#endif /* CONFIG_MPIC */ + +#ifdef CONFIG_PPC64 +void __devinit smp_generic_kick_cpu(int nr) +{ + BUG_ON(nr < 0 || nr >= NR_CPUS); + + /* + * The processor is currently spinning, waiting for the + * cpu_start field to become non-zero After we set cpu_start, + * the processor will continue on to secondary_start + */ + paca[nr].cpu_start = 1; + smp_mb(); +} +#endif + +void smp_message_recv(int msg, struct pt_regs *regs) +{ + switch(msg) { + case PPC_MSG_CALL_FUNCTION: + smp_call_function_interrupt(); + break; + case PPC_MSG_RESCHEDULE: + /* XXX Do we have to do this? */ + set_need_resched(); + break; +#ifdef CONFIG_DEBUGGER + case PPC_MSG_DEBUGGER_BREAK: + debugger_ipi(regs); + break; +#endif + default: + printk("SMP %d: smp_message_recv(): unknown msg %d\n", + smp_processor_id(), msg); + break; + } +} + +void smp_send_reschedule(int cpu) +{ + smp_ops->message_pass(cpu, PPC_MSG_RESCHEDULE); +} + +#ifdef CONFIG_DEBUGGER +void smp_send_debugger_break(int cpu) +{ + smp_ops->message_pass(cpu, PPC_MSG_DEBUGGER_BREAK); +} +#endif + +static void stop_this_cpu(void *dummy) +{ + local_irq_disable(); + while (1) + ; +} + +void smp_send_stop(void) +{ + smp_call_function(stop_this_cpu, NULL, 1, 0); +} + +/* + * Structure and data for smp_call_function(). This is designed to minimise + * static memory requirements. It also looks cleaner. + * Stolen from the i386 version. + */ +static __cacheline_aligned_in_smp DEFINE_SPINLOCK(call_lock); + +static struct call_data_struct { + void (*func) (void *info); + void *info; + atomic_t started; + atomic_t finished; + int wait; +} *call_data; + +/* delay of at least 8 seconds */ +#define SMP_CALL_TIMEOUT 8 + +/* + * This function sends a 'generic call function' IPI to all other CPUs + * in the system. + * + * [SUMMARY] Run a function on all other CPUs. + * <func> The function to run. This must be fast and non-blocking. + * <info> An arbitrary pointer to pass to the function. + * <nonatomic> currently unused. + * <wait> If true, wait (atomically) until function has completed on other CPUs. + * [RETURNS] 0 on success, else a negative status code. Does not return until + * remote CPUs are nearly ready to execute <<func>> or are or have executed. + * + * You must not call this function with disabled interrupts or from a + * hardware interrupt handler or from a bottom half handler. + */ +int smp_call_function (void (*func) (void *info), void *info, int nonatomic, + int wait) +{ + struct call_data_struct data; + int ret = -1, cpus; + u64 timeout; + + /* Can deadlock when called with interrupts disabled */ + WARN_ON(irqs_disabled()); + + data.func = func; + data.info = info; + atomic_set(&data.started, 0); + data.wait = wait; + if (wait) + atomic_set(&data.finished, 0); + + spin_lock(&call_lock); + /* Must grab online cpu count with preempt disabled, otherwise + * it can change. */ + cpus = num_online_cpus() - 1; + if (!cpus) { + ret = 0; + goto out; + } + + call_data = &data; + smp_wmb(); + /* Send a message to all other CPUs and wait for them to respond */ + smp_ops->message_pass(MSG_ALL_BUT_SELF, PPC_MSG_CALL_FUNCTION); + + timeout = get_tb() + (u64) SMP_CALL_TIMEOUT * tb_ticks_per_sec; + + /* Wait for response */ + while (atomic_read(&data.started) != cpus) { + HMT_low(); + if (get_tb() >= timeout) { + printk("smp_call_function on cpu %d: other cpus not " + "responding (%d)\n", smp_processor_id(), + atomic_read(&data.started)); + debugger(NULL); + goto out; + } + } + + if (wait) { + while (atomic_read(&data.finished) != cpus) { + HMT_low(); + if (get_tb() >= timeout) { + printk("smp_call_function on cpu %d: other " + "cpus not finishing (%d/%d)\n", + smp_processor_id(), + atomic_read(&data.finished), + atomic_read(&data.started)); + debugger(NULL); + goto out; + } + } + } + + ret = 0; + + out: + call_data = NULL; + HMT_medium(); + spin_unlock(&call_lock); + return ret; +} + +EXPORT_SYMBOL(smp_call_function); + +void smp_call_function_interrupt(void) +{ + void (*func) (void *info); + void *info; + int wait; + + /* call_data will be NULL if the sender timed out while + * waiting on us to receive the call. + */ + if (!call_data) + return; + + func = call_data->func; + info = call_data->info; + wait = call_data->wait; + + if (!wait) + smp_mb__before_atomic_inc(); + + /* + * Notify initiating CPU that I've grabbed the data and am + * about to execute the function + */ + atomic_inc(&call_data->started); + /* + * At this point the info structure may be out of scope unless wait==1 + */ + (*func)(info); + if (wait) { + smp_mb__before_atomic_inc(); + atomic_inc(&call_data->finished); + } +} + +extern struct gettimeofday_struct do_gtod; + +struct thread_info *current_set[NR_CPUS]; + +DECLARE_PER_CPU(unsigned int, pvr); + +static void __devinit smp_store_cpu_info(int id) +{ + per_cpu(pvr, id) = mfspr(SPRN_PVR); +} + +static void __init smp_create_idle(unsigned int cpu) +{ + struct task_struct *p; + + /* create a process for the processor */ + p = fork_idle(cpu); + if (IS_ERR(p)) + panic("failed fork for CPU %u: %li", cpu, PTR_ERR(p)); +#ifdef CONFIG_PPC64 + paca[cpu].__current = p; +#endif + current_set[cpu] = p->thread_info; + p->thread_info->cpu = cpu; +} + +void __init smp_prepare_cpus(unsigned int max_cpus) +{ + unsigned int cpu; + + DBG("smp_prepare_cpus\n"); + + /* + * setup_cpu may need to be called on the boot cpu. We havent + * spun any cpus up but lets be paranoid. + */ + BUG_ON(boot_cpuid != smp_processor_id()); + + /* Fixup boot cpu */ + smp_store_cpu_info(boot_cpuid); + cpu_callin_map[boot_cpuid] = 1; + + max_cpus = smp_ops->probe(); + + smp_space_timers(max_cpus); + + for_each_cpu(cpu) + if (cpu != boot_cpuid) + smp_create_idle(cpu); +} + +void __devinit smp_prepare_boot_cpu(void) +{ + BUG_ON(smp_processor_id() != boot_cpuid); + + cpu_set(boot_cpuid, cpu_online_map); +#ifdef CONFIG_PPC64 + paca[boot_cpuid].__current = current; +#endif + current_set[boot_cpuid] = current->thread_info; +} + +#ifdef CONFIG_HOTPLUG_CPU +/* State of each CPU during hotplug phases */ +DEFINE_PER_CPU(int, cpu_state) = { 0 }; + +int generic_cpu_disable(void) +{ + unsigned int cpu = smp_processor_id(); + + if (cpu == boot_cpuid) + return -EBUSY; + + systemcfg->processorCount--; + cpu_clear(cpu, cpu_online_map); + fixup_irqs(cpu_online_map); + return 0; +} + +int generic_cpu_enable(unsigned int cpu) +{ + /* Do the normal bootup if we haven't + * already bootstrapped. */ + if (system_state != SYSTEM_RUNNING) + return -ENOSYS; + + /* get the target out of it's holding state */ + per_cpu(cpu_state, cpu) = CPU_UP_PREPARE; + smp_wmb(); + + while (!cpu_online(cpu)) + cpu_relax(); + + fixup_irqs(cpu_online_map); + /* counter the irq disable in fixup_irqs */ + local_irq_enable(); + return 0; +} + +void generic_cpu_die(unsigned int cpu) +{ + int i; + + for (i = 0; i < 100; i++) { + smp_rmb(); + if (per_cpu(cpu_state, cpu) == CPU_DEAD) + return; + msleep(100); + } + printk(KERN_ERR "CPU%d didn't die...\n", cpu); +} + +void generic_mach_cpu_die(void) +{ + unsigned int cpu; + + local_irq_disable(); + cpu = smp_processor_id(); + printk(KERN_DEBUG "CPU%d offline\n", cpu); + __get_cpu_var(cpu_state) = CPU_DEAD; + smp_wmb(); + while (__get_cpu_var(cpu_state) != CPU_UP_PREPARE) + cpu_relax(); + + flush_tlb_pending(); + cpu_set(cpu, cpu_online_map); + local_irq_enable(); +} +#endif + +static int __devinit cpu_enable(unsigned int cpu) +{ + if (smp_ops->cpu_enable) + return smp_ops->cpu_enable(cpu); + + return -ENOSYS; +} + +int __devinit __cpu_up(unsigned int cpu) +{ + int c; + + secondary_ti = current_set[cpu]; + if (!cpu_enable(cpu)) + return 0; + + if (smp_ops->cpu_bootable && !smp_ops->cpu_bootable(cpu)) + return -EINVAL; + +#ifdef CONFIG_PPC64 + paca[cpu].default_decr = tb_ticks_per_jiffy; +#endif + + /* Make sure callin-map entry is 0 (can be leftover a CPU + * hotplug + */ + cpu_callin_map[cpu] = 0; + + /* The information for processor bringup must + * be written out to main store before we release + * the processor. + */ + smp_mb(); + + /* wake up cpus */ + DBG("smp: kicking cpu %d\n", cpu); + smp_ops->kick_cpu(cpu); + + /* + * wait to see if the cpu made a callin (is actually up). + * use this value that I found through experimentation. + * -- Cort + */ + if (system_state < SYSTEM_RUNNING) + for (c = 5000; c && !cpu_callin_map[cpu]; c--) + udelay(100); +#ifdef CONFIG_HOTPLUG_CPU + else + /* + * CPUs can take much longer to come up in the + * hotplug case. Wait five seconds. + */ + for (c = 25; c && !cpu_callin_map[cpu]; c--) { + msleep(200); + } +#endif + + if (!cpu_callin_map[cpu]) { + printk("Processor %u is stuck.\n", cpu); + return -ENOENT; + } + + printk("Processor %u found.\n", cpu); + + if (smp_ops->give_timebase) + smp_ops->give_timebase(); + + /* Wait until cpu puts itself in the online map */ + while (!cpu_online(cpu)) + cpu_relax(); + + return 0; +} + + +/* Activate a secondary processor. */ +int __devinit start_secondary(void *unused) +{ + unsigned int cpu = smp_processor_id(); + + atomic_inc(&init_mm.mm_count); + current->active_mm = &init_mm; + + smp_store_cpu_info(cpu); + set_dec(tb_ticks_per_jiffy); + cpu_callin_map[cpu] = 1; + + smp_ops->setup_cpu(cpu); + if (smp_ops->take_timebase) + smp_ops->take_timebase(); + + spin_lock(&call_lock); + cpu_set(cpu, cpu_online_map); + spin_unlock(&call_lock); + + local_irq_enable(); + + cpu_idle(); + return 0; +} + +int setup_profiling_timer(unsigned int multiplier) +{ + return 0; +} + +void __init smp_cpus_done(unsigned int max_cpus) +{ + cpumask_t old_mask; + + /* We want the setup_cpu() here to be called from CPU 0, but our + * init thread may have been "borrowed" by another CPU in the meantime + * se we pin us down to CPU 0 for a short while + */ + old_mask = current->cpus_allowed; + set_cpus_allowed(current, cpumask_of_cpu(boot_cpuid)); + + smp_ops->setup_cpu(boot_cpuid); + + set_cpus_allowed(current, old_mask); +} + +#ifdef CONFIG_HOTPLUG_CPU +int __cpu_disable(void) +{ + if (smp_ops->cpu_disable) + return smp_ops->cpu_disable(); + + return -ENOSYS; +} + +void __cpu_die(unsigned int cpu) +{ + if (smp_ops->cpu_die) + smp_ops->cpu_die(cpu); +} +#endif diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c index 23436b6c188..6996a593dcb 100644 --- a/arch/powerpc/kernel/time.c +++ b/arch/powerpc/kernel/time.c @@ -66,8 +66,8 @@ #include <asm/firmware.h> #endif #ifdef CONFIG_PPC_ISERIES -#include <asm/iSeries/ItLpQueue.h> -#include <asm/iSeries/HvCallXm.h> +#include <asm/iseries/it_lp_queue.h> +#include <asm/iseries/hv_call_xm.h> #endif /* keep track of when we need to update the rtc */ diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c index 5d638ecddbd..07e5ee40b87 100644 --- a/arch/powerpc/kernel/traps.c +++ b/arch/powerpc/kernel/traps.c @@ -147,8 +147,8 @@ int die(const char *str, struct pt_regs *regs, long err) printk("POWERMAC "); nl = 1; break; - case PLATFORM_BPA: - printk("BPA "); + case PLATFORM_CELL: + printk("CELL "); nl = 1; break; } @@ -749,22 +749,22 @@ static int check_bug_trap(struct pt_regs *regs) if (bug->line & BUG_WARNING_TRAP) { /* this is a WARN_ON rather than BUG/BUG_ON */ #ifdef CONFIG_XMON - xmon_printf(KERN_ERR "Badness in %s at %s:%d\n", + xmon_printf(KERN_ERR "Badness in %s at %s:%ld\n", bug->function, bug->file, bug->line & ~BUG_WARNING_TRAP); #endif /* CONFIG_XMON */ - printk(KERN_ERR "Badness in %s at %s:%d\n", + printk(KERN_ERR "Badness in %s at %s:%ld\n", bug->function, bug->file, bug->line & ~BUG_WARNING_TRAP); dump_stack(); return 1; } #ifdef CONFIG_XMON - xmon_printf(KERN_CRIT "kernel BUG in %s at %s:%d!\n", + xmon_printf(KERN_CRIT "kernel BUG in %s at %s:%ld!\n", bug->function, bug->file, bug->line); xmon(regs); #endif /* CONFIG_XMON */ - printk(KERN_CRIT "kernel BUG in %s at %s:%d!\n", + printk(KERN_CRIT "kernel BUG in %s at %s:%ld!\n", bug->function, bug->file, bug->line); return 0; diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S index d4dfcfbce27..7fa7b15fd8e 100644 --- a/arch/powerpc/kernel/vmlinux.lds.S +++ b/arch/powerpc/kernel/vmlinux.lds.S @@ -3,9 +3,12 @@ #include <asm/page.h> #else #define PAGE_SIZE 4096 +#define KERNELBASE CONFIG_KERNEL_START #endif #include <asm-generic/vmlinux.lds.h> +ENTRY(_stext) + #ifdef CONFIG_PPC64 OUTPUT_ARCH(powerpc:common64) jiffies = jiffies_64; @@ -21,33 +24,9 @@ SECTIONS *(.exit.data) } + . = KERNELBASE; /* Read-only sections, merged into text segment: */ -#ifdef CONFIG_PPC32 - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } -/* .init : { *(.init) } =0*/ - .plt : { *(.plt) } -#endif .text : { *(.text .text.*) SCHED_TEXT diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile index e6b2be3bcec..34f5c2e074c 100644 --- a/arch/powerpc/lib/Makefile +++ b/arch/powerpc/lib/Makefile @@ -3,13 +3,14 @@ # ifeq ($(CONFIG_PPC_MERGE),y) -obj-y := string.o +obj-y := string.o strcase.o +obj-$(CONFIG_PPC32) += div64.o copy_32.o checksum_32.o endif -obj-y += strcase.o -obj-$(CONFIG_PPC32) += div64.o copy_32.o checksum_32.o +obj-y += bitops.o obj-$(CONFIG_PPC64) += checksum_64.o copypage_64.o copyuser_64.o \ - memcpy_64.o usercopy_64.o mem_64.o + memcpy_64.o usercopy_64.o mem_64.o string.o \ + strcase.o obj-$(CONFIG_PPC_ISERIES) += e2a.o obj-$(CONFIG_XMON) += sstep.o diff --git a/arch/powerpc/lib/bitops.c b/arch/powerpc/lib/bitops.c new file mode 100644 index 00000000000..b67ce3004eb --- /dev/null +++ b/arch/powerpc/lib/bitops.c @@ -0,0 +1,150 @@ +#include <linux/types.h> +#include <linux/module.h> +#include <asm/byteorder.h> +#include <asm/bitops.h> + +/** + * find_next_bit - find the next set bit in a memory region + * @addr: The address to base the search on + * @offset: The bitnumber to start searching at + * @size: The maximum size to search + */ +unsigned long find_next_bit(const unsigned long *addr, unsigned long size, + unsigned long offset) +{ + const unsigned long *p = addr + BITOP_WORD(offset); + unsigned long result = offset & ~(BITS_PER_LONG-1); + unsigned long tmp; + + if (offset >= size) + return size; + size -= result; + offset %= BITS_PER_LONG; + if (offset) { + tmp = *(p++); + tmp &= (~0UL << offset); + if (size < BITS_PER_LONG) + goto found_first; + if (tmp) + goto found_middle; + size -= BITS_PER_LONG; + result += BITS_PER_LONG; + } + while (size & ~(BITS_PER_LONG-1)) { + if ((tmp = *(p++))) + goto found_middle; + result += BITS_PER_LONG; + size -= BITS_PER_LONG; + } + if (!size) + return result; + tmp = *p; + +found_first: + tmp &= (~0UL >> (64 - size)); + if (tmp == 0UL) /* Are any bits set? */ + return result + size; /* Nope. */ +found_middle: + return result + __ffs(tmp); +} +EXPORT_SYMBOL(find_next_bit); + +/* + * This implementation of find_{first,next}_zero_bit was stolen from + * Linus' asm-alpha/bitops.h. + */ +unsigned long find_next_zero_bit(const unsigned long *addr, unsigned long size, + unsigned long offset) +{ + const unsigned long *p = addr + BITOP_WORD(offset); + unsigned long result = offset & ~(BITS_PER_LONG-1); + unsigned long tmp; + + if (offset >= size) + return size; + size -= result; + offset %= BITS_PER_LONG; + if (offset) { + tmp = *(p++); + tmp |= ~0UL >> (BITS_PER_LONG - offset); + if (size < BITS_PER_LONG) + goto found_first; + if (~tmp) + goto found_middle; + size -= BITS_PER_LONG; + result += BITS_PER_LONG; + } + while (size & ~(BITS_PER_LONG-1)) { + if (~(tmp = *(p++))) + goto found_middle; + result += BITS_PER_LONG; + size -= BITS_PER_LONG; + } + if (!size) + return result; + tmp = *p; + +found_first: + tmp |= ~0UL << size; + if (tmp == ~0UL) /* Are any bits zero? */ + return result + size; /* Nope. */ +found_middle: + return result + ffz(tmp); +} +EXPORT_SYMBOL(find_next_zero_bit); + +static inline unsigned int ext2_ilog2(unsigned int x) +{ + int lz; + + asm("cntlzw %0,%1": "=r"(lz):"r"(x)); + return 31 - lz; +} + +static inline unsigned int ext2_ffz(unsigned int x) +{ + u32 rc; + if ((x = ~x) == 0) + return 32; + rc = ext2_ilog2(x & -x); + return rc; +} + +unsigned long find_next_zero_le_bit(const unsigned long *addr, + unsigned long size, unsigned long offset) +{ + const unsigned int *p = ((const unsigned int *)addr) + (offset >> 5); + unsigned int result = offset & ~31; + unsigned int tmp; + + if (offset >= size) + return size; + size -= result; + offset &= 31; + if (offset) { + tmp = cpu_to_le32p(p++); + tmp |= ~0U >> (32 - offset); /* bug or feature ? */ + if (size < 32) + goto found_first; + if (tmp != ~0) + goto found_middle; + size -= 32; + result += 32; + } + while (size >= 32) { + if ((tmp = cpu_to_le32p(p++)) != ~0) + goto found_middle; + result += 32; + size -= 32; + } + if (!size) + return result; + tmp = cpu_to_le32p(p); +found_first: + tmp |= ~0 << size; + if (tmp == ~0) /* Are any bits zero? */ + return result + size; /* Nope. */ +found_middle: + return result + ext2_ffz(tmp); +} +EXPORT_SYMBOL(find_next_zero_le_bit); diff --git a/arch/powerpc/lib/locks.c b/arch/powerpc/lib/locks.c index 3794715b297..2a912f411eb 100644 --- a/arch/powerpc/lib/locks.c +++ b/arch/powerpc/lib/locks.c @@ -22,7 +22,7 @@ /* waiting for a spinlock... */ #if defined(CONFIG_PPC_SPLPAR) || defined(CONFIG_PPC_ISERIES) #include <asm/hvcall.h> -#include <asm/iSeries/HvCall.h> +#include <asm/iseries/hv_call.h> void __spin_yield(raw_spinlock_t *lock) { diff --git a/arch/powerpc/platforms/Makefile b/arch/powerpc/platforms/Makefile index 172c0db6350..8836b3a0066 100644 --- a/arch/powerpc/platforms/Makefile +++ b/arch/powerpc/platforms/Makefile @@ -11,3 +11,4 @@ obj-$(CONFIG_85xx) += 85xx/ obj-$(CONFIG_PPC_PSERIES) += pseries/ obj-$(CONFIG_PPC_ISERIES) += iseries/ obj-$(CONFIG_PPC_MAPLE) += maple/ +obj-$(CONFIG_PPC_CELL) += cell/ diff --git a/arch/powerpc/platforms/cell/Makefile b/arch/powerpc/platforms/cell/Makefile new file mode 100644 index 00000000000..55e094b96bc --- /dev/null +++ b/arch/powerpc/platforms/cell/Makefile @@ -0,0 +1,2 @@ +obj-y += interrupt.o iommu.o setup.o spider-pic.o +obj-$(CONFIG_SMP) += smp.o diff --git a/arch/powerpc/platforms/cell/interrupt.c b/arch/powerpc/platforms/cell/interrupt.c new file mode 100644 index 00000000000..7fbe78a9327 --- /dev/null +++ b/arch/powerpc/platforms/cell/interrupt.c @@ -0,0 +1,284 @@ +/* + * Cell Internal Interrupt Controller + * + * (C) Copyright IBM Deutschland Entwicklung GmbH 2005 + * + * Author: Arnd Bergmann <arndb@de.ibm.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/config.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/percpu.h> +#include <linux/types.h> + +#include <asm/io.h> +#include <asm/pgtable.h> +#include <asm/prom.h> +#include <asm/ptrace.h> + +#include "interrupt.h" + +struct iic_pending_bits { + u32 data; + u8 flags; + u8 class; + u8 source; + u8 prio; +}; + +enum iic_pending_flags { + IIC_VALID = 0x80, + IIC_IPI = 0x40, +}; + +struct iic_regs { + struct iic_pending_bits pending; + struct iic_pending_bits pending_destr; + u64 generate; + u64 prio; +}; + +struct iic { + struct iic_regs __iomem *regs; +}; + +static DEFINE_PER_CPU(struct iic, iic); + +void iic_local_enable(void) +{ + out_be64(&__get_cpu_var(iic).regs->prio, 0xff); +} + +void iic_local_disable(void) +{ + out_be64(&__get_cpu_var(iic).regs->prio, 0x0); +} + +static unsigned int iic_startup(unsigned int irq) +{ + return 0; +} + +static void iic_enable(unsigned int irq) +{ + iic_local_enable(); +} + +static void iic_disable(unsigned int irq) +{ +} + +static void iic_end(unsigned int irq) +{ + iic_local_enable(); +} + +static struct hw_interrupt_type iic_pic = { + .typename = " CELL-IIC ", + .startup = iic_startup, + .enable = iic_enable, + .disable = iic_disable, + .end = iic_end, +}; + +static int iic_external_get_irq(struct iic_pending_bits pending) +{ + int irq; + unsigned char node, unit; + + node = pending.source >> 4; + unit = pending.source & 0xf; + irq = -1; + + /* + * This mapping is specific to the Cell Broadband + * Engine. We might need to get the numbers + * from the device tree to support future CPUs. + */ + switch (unit) { + case 0x00: + case 0x0b: + /* + * One of these units can be connected + * to an external interrupt controller. + */ + if (pending.prio > 0x3f || + pending.class != 2) + break; + irq = IIC_EXT_OFFSET + + spider_get_irq(pending.prio + node * IIC_NODE_STRIDE) + + node * IIC_NODE_STRIDE; + break; + case 0x01 ... 0x04: + case 0x07 ... 0x0a: + /* + * These units are connected to the SPEs + */ + if (pending.class > 2) + break; + irq = IIC_SPE_OFFSET + + pending.class * IIC_CLASS_STRIDE + + node * IIC_NODE_STRIDE + + unit; + break; + } + if (irq == -1) + printk(KERN_WARNING "Unexpected interrupt class %02x, " + "source %02x, prio %02x, cpu %02x\n", pending.class, + pending.source, pending.prio, smp_processor_id()); + return irq; +} + +/* Get an IRQ number from the pending state register of the IIC */ +int iic_get_irq(struct pt_regs *regs) +{ + struct iic *iic; + int irq; + struct iic_pending_bits pending; + + iic = &__get_cpu_var(iic); + *(unsigned long *) &pending = + in_be64((unsigned long __iomem *) &iic->regs->pending_destr); + + irq = -1; + if (pending.flags & IIC_VALID) { + if (pending.flags & IIC_IPI) { + irq = IIC_IPI_OFFSET + (pending.prio >> 4); +/* + if (irq > 0x80) + printk(KERN_WARNING "Unexpected IPI prio %02x" + "on CPU %02x\n", pending.prio, + smp_processor_id()); +*/ + } else { + irq = iic_external_get_irq(pending); + } + } + return irq; +} + +static struct iic_regs __iomem *find_iic(int cpu) +{ + struct device_node *np; + int nodeid = cpu / 2; + unsigned long regs; + struct iic_regs __iomem *iic_regs; + + for (np = of_find_node_by_type(NULL, "cpu"); + np; + np = of_find_node_by_type(np, "cpu")) { + if (nodeid == *(int *)get_property(np, "node-id", NULL)) + break; + } + + if (!np) { + printk(KERN_WARNING "IIC: CPU %d not found\n", cpu); + iic_regs = NULL; + } else { + regs = *(long *)get_property(np, "iic", NULL); + + /* hack until we have decided on the devtree info */ + regs += 0x400; + if (cpu & 1) + regs += 0x20; + + printk(KERN_DEBUG "IIC for CPU %d at %lx\n", cpu, regs); + iic_regs = __ioremap(regs, sizeof(struct iic_regs), + _PAGE_NO_CACHE); + } + return iic_regs; +} + +#ifdef CONFIG_SMP + +/* Use the highest interrupt priorities for IPI */ +static inline int iic_ipi_to_irq(int ipi) +{ + return IIC_IPI_OFFSET + IIC_NUM_IPIS - 1 - ipi; +} + +static inline int iic_irq_to_ipi(int irq) +{ + return IIC_NUM_IPIS - 1 - (irq - IIC_IPI_OFFSET); +} + +void iic_setup_cpu(void) +{ + out_be64(&__get_cpu_var(iic).regs->prio, 0xff); +} + +void iic_cause_IPI(int cpu, int mesg) +{ + out_be64(&per_cpu(iic, cpu).regs->generate, (IIC_NUM_IPIS - 1 - mesg) << 4); +} + +static irqreturn_t iic_ipi_action(int irq, void *dev_id, struct pt_regs *regs) +{ + smp_message_recv(iic_irq_to_ipi(irq), regs); + return IRQ_HANDLED; +} + +static void iic_request_ipi(int ipi, const char *name) +{ + int irq; + + irq = iic_ipi_to_irq(ipi); + /* IPIs are marked SA_INTERRUPT as they must run with irqs + * disabled */ + get_irq_desc(irq)->handler = &iic_pic; + get_irq_desc(irq)->status |= IRQ_PER_CPU; + request_irq(irq, iic_ipi_action, SA_INTERRUPT, name, NULL); +} + +void iic_request_IPIs(void) +{ + iic_request_ipi(PPC_MSG_CALL_FUNCTION, "IPI-call"); + iic_request_ipi(PPC_MSG_RESCHEDULE, "IPI-resched"); +#ifdef CONFIG_DEBUGGER + iic_request_ipi(PPC_MSG_DEBUGGER_BREAK, "IPI-debug"); +#endif /* CONFIG_DEBUGGER */ +} +#endif /* CONFIG_SMP */ + +static void iic_setup_spe_handlers(void) +{ + int be, isrc; + + /* Assume two threads per BE are present */ + for (be=0; be < num_present_cpus() / 2; be++) { + for (isrc = 0; isrc < IIC_CLASS_STRIDE * 3; isrc++) { + int irq = IIC_NODE_STRIDE * be + IIC_SPE_OFFSET + isrc; + get_irq_desc(irq)->handler = &iic_pic; + } + } +} + +void iic_init_IRQ(void) +{ + int cpu, irq_offset; + struct iic *iic; + + irq_offset = 0; + for_each_cpu(cpu) { + iic = &per_cpu(iic, cpu); + iic->regs = find_iic(cpu); + if (iic->regs) + out_be64(&iic->regs->prio, 0xff); + } + iic_setup_spe_handlers(); +} diff --git a/arch/powerpc/platforms/cell/interrupt.h b/arch/powerpc/platforms/cell/interrupt.h new file mode 100644 index 00000000000..37d58e6fd0c --- /dev/null +++ b/arch/powerpc/platforms/cell/interrupt.h @@ -0,0 +1,62 @@ +#ifndef ASM_CELL_PIC_H +#define ASM_CELL_PIC_H +#ifdef __KERNEL__ +/* + * Mapping of IIC pending bits into per-node + * interrupt numbers. + * + * IRQ FF CC SS PP FF CC SS PP Description + * + * 00-3f 80 02 +0 00 - 80 02 +0 3f South Bridge + * 00-3f 80 02 +b 00 - 80 02 +b 3f South Bridge + * 41-4a 80 00 +1 ** - 80 00 +a ** SPU Class 0 + * 51-5a 80 01 +1 ** - 80 01 +a ** SPU Class 1 + * 61-6a 80 02 +1 ** - 80 02 +a ** SPU Class 2 + * 70-7f C0 ** ** 00 - C0 ** ** 0f IPI + * + * F flags + * C class + * S source + * P Priority + * + node number + * * don't care + * + * A node consists of a Cell Broadband Engine and an optional + * south bridge device providing a maximum of 64 IRQs. + * The south bridge may be connected to either IOIF0 + * or IOIF1. + * Each SPE is represented as three IRQ lines, one per + * interrupt class. + * 16 IRQ numbers are reserved for inter processor + * interruptions, although these are only used in the + * range of the first node. + * + * This scheme needs 128 IRQ numbers per BIF node ID, + * which means that with the total of 512 lines + * available, we can have a maximum of four nodes. + */ + +enum { + IIC_EXT_OFFSET = 0x00, /* Start of south bridge IRQs */ + IIC_NUM_EXT = 0x40, /* Number of south bridge IRQs */ + IIC_SPE_OFFSET = 0x40, /* Start of SPE interrupts */ + IIC_CLASS_STRIDE = 0x10, /* SPE IRQs per class */ + IIC_IPI_OFFSET = 0x70, /* Start of IPI IRQs */ + IIC_NUM_IPIS = 0x10, /* IRQs reserved for IPI */ + IIC_NODE_STRIDE = 0x80, /* Total IRQs per node */ +}; + +extern void iic_init_IRQ(void); +extern int iic_get_irq(struct pt_regs *regs); +extern void iic_cause_IPI(int cpu, int mesg); +extern void iic_request_IPIs(void); +extern void iic_setup_cpu(void); +extern void iic_local_enable(void); +extern void iic_local_disable(void); + + +extern void spider_init_IRQ(void); +extern int spider_get_irq(unsigned long int_pending); + +#endif +#endif /* ASM_CELL_PIC_H */ diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c new file mode 100644 index 00000000000..74f999b4ac9 --- /dev/null +++ b/arch/powerpc/platforms/cell/iommu.c @@ -0,0 +1,381 @@ +/* + * IOMMU implementation for Cell Broadband Processor Architecture + * We just establish a linear mapping at boot by setting all the + * IOPT cache entries in the CPU. + * The mapping functions should be identical to pci_direct_iommu, + * except for the handling of the high order bit that is required + * by the Spider bridge. These should be split into a separate + * file at the point where we get a different bridge chip. + * + * Copyright (C) 2005 IBM Deutschland Entwicklung GmbH, + * Arnd Bergmann <arndb@de.ibm.com> + * + * Based on linear mapping + * Copyright (C) 2003 Benjamin Herrenschmidt (benh@kernel.crashing.org) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#undef DEBUG + +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/delay.h> +#include <linux/string.h> +#include <linux/init.h> +#include <linux/bootmem.h> +#include <linux/mm.h> +#include <linux/dma-mapping.h> + +#include <asm/sections.h> +#include <asm/iommu.h> +#include <asm/io.h> +#include <asm/prom.h> +#include <asm/pci-bridge.h> +#include <asm/machdep.h> +#include <asm/pmac_feature.h> +#include <asm/abs_addr.h> +#include <asm/system.h> +#include <asm/ppc-pci.h> + +#include "iommu.h" + +static inline unsigned long +get_iopt_entry(unsigned long real_address, unsigned long ioid, + unsigned long prot) +{ + return (prot & IOPT_PROT_MASK) + | (IOPT_COHERENT) + | (IOPT_ORDER_VC) + | (real_address & IOPT_RPN_MASK) + | (ioid & IOPT_IOID_MASK); +} + +typedef struct { + unsigned long val; +} ioste; + +static inline ioste +mk_ioste(unsigned long val) +{ + ioste ioste = { .val = val, }; + return ioste; +} + +static inline ioste +get_iost_entry(unsigned long iopt_base, unsigned long io_address, unsigned page_size) +{ + unsigned long ps; + unsigned long iostep; + unsigned long nnpt; + unsigned long shift; + + switch (page_size) { + case 0x1000000: + ps = IOST_PS_16M; + nnpt = 0; /* one page per segment */ + shift = 5; /* segment has 16 iopt entries */ + break; + + case 0x100000: + ps = IOST_PS_1M; + nnpt = 0; /* one page per segment */ + shift = 1; /* segment has 256 iopt entries */ + break; + + case 0x10000: + ps = IOST_PS_64K; + nnpt = 0x07; /* 8 pages per io page table */ + shift = 0; /* all entries are used */ + break; + + case 0x1000: + ps = IOST_PS_4K; + nnpt = 0x7f; /* 128 pages per io page table */ + shift = 0; /* all entries are used */ + break; + + default: /* not a known compile time constant */ + { + /* BUILD_BUG_ON() is not usable here */ + extern void __get_iost_entry_bad_page_size(void); + __get_iost_entry_bad_page_size(); + } + break; + } + + iostep = iopt_base + + /* need 8 bytes per iopte */ + (((io_address / page_size * 8) + /* align io page tables on 4k page boundaries */ + << shift) + /* nnpt+1 pages go into each iopt */ + & ~(nnpt << 12)); + + nnpt++; /* this seems to work, but the documentation is not clear + about wether we put nnpt or nnpt-1 into the ioste bits. + In theory, this can't work for 4k pages. */ + return mk_ioste(IOST_VALID_MASK + | (iostep & IOST_PT_BASE_MASK) + | ((nnpt << 5) & IOST_NNPT_MASK) + | (ps & IOST_PS_MASK)); +} + +/* compute the address of an io pte */ +static inline unsigned long +get_ioptep(ioste iost_entry, unsigned long io_address) +{ + unsigned long iopt_base; + unsigned long page_size; + unsigned long page_number; + unsigned long iopt_offset; + + iopt_base = iost_entry.val & IOST_PT_BASE_MASK; + page_size = iost_entry.val & IOST_PS_MASK; + + /* decode page size to compute page number */ + page_number = (io_address & 0x0fffffff) >> (10 + 2 * page_size); + /* page number is an offset into the io page table */ + iopt_offset = (page_number << 3) & 0x7fff8ul; + return iopt_base + iopt_offset; +} + +/* compute the tag field of the iopt cache entry */ +static inline unsigned long +get_ioc_tag(ioste iost_entry, unsigned long io_address) +{ + unsigned long iopte = get_ioptep(iost_entry, io_address); + + return IOPT_VALID_MASK + | ((iopte & 0x00000000000000ff8ul) >> 3) + | ((iopte & 0x0000003fffffc0000ul) >> 9); +} + +/* compute the hashed 6 bit index for the 4-way associative pte cache */ +static inline unsigned long +get_ioc_hash(ioste iost_entry, unsigned long io_address) +{ + unsigned long iopte = get_ioptep(iost_entry, io_address); + + return ((iopte & 0x000000000000001f8ul) >> 3) + ^ ((iopte & 0x00000000000020000ul) >> 17) + ^ ((iopte & 0x00000000000010000ul) >> 15) + ^ ((iopte & 0x00000000000008000ul) >> 13) + ^ ((iopte & 0x00000000000004000ul) >> 11) + ^ ((iopte & 0x00000000000002000ul) >> 9) + ^ ((iopte & 0x00000000000001000ul) >> 7); +} + +/* same as above, but pretend that we have a simpler 1-way associative + pte cache with an 8 bit index */ +static inline unsigned long +get_ioc_hash_1way(ioste iost_entry, unsigned long io_address) +{ + unsigned long iopte = get_ioptep(iost_entry, io_address); + + return ((iopte & 0x000000000000001f8ul) >> 3) + ^ ((iopte & 0x00000000000020000ul) >> 17) + ^ ((iopte & 0x00000000000010000ul) >> 15) + ^ ((iopte & 0x00000000000008000ul) >> 13) + ^ ((iopte & 0x00000000000004000ul) >> 11) + ^ ((iopte & 0x00000000000002000ul) >> 9) + ^ ((iopte & 0x00000000000001000ul) >> 7) + ^ ((iopte & 0x0000000000000c000ul) >> 8); +} + +static inline ioste +get_iost_cache(void __iomem *base, unsigned long index) +{ + unsigned long __iomem *p = (base + IOC_ST_CACHE_DIR); + return mk_ioste(in_be64(&p[index])); +} + +static inline void +set_iost_cache(void __iomem *base, unsigned long index, ioste ste) +{ + unsigned long __iomem *p = (base + IOC_ST_CACHE_DIR); + pr_debug("ioste %02lx was %016lx, store %016lx", index, + get_iost_cache(base, index).val, ste.val); + out_be64(&p[index], ste.val); + pr_debug(" now %016lx\n", get_iost_cache(base, index).val); +} + +static inline unsigned long +get_iopt_cache(void __iomem *base, unsigned long index, unsigned long *tag) +{ + unsigned long __iomem *tags = (void *)(base + IOC_PT_CACHE_DIR); + unsigned long __iomem *p = (void *)(base + IOC_PT_CACHE_REG); + + *tag = tags[index]; + rmb(); + return *p; +} + +static inline void +set_iopt_cache(void __iomem *base, unsigned long index, + unsigned long tag, unsigned long val) +{ + unsigned long __iomem *tags = base + IOC_PT_CACHE_DIR; + unsigned long __iomem *p = base + IOC_PT_CACHE_REG; + pr_debug("iopt %02lx was v%016lx/t%016lx, store v%016lx/t%016lx\n", + index, get_iopt_cache(base, index, &oldtag), oldtag, val, tag); + + out_be64(p, val); + out_be64(&tags[index], tag); +} + +static inline void +set_iost_origin(void __iomem *base) +{ + unsigned long __iomem *p = base + IOC_ST_ORIGIN; + unsigned long origin = IOSTO_ENABLE | IOSTO_SW; + + pr_debug("iost_origin %016lx, now %016lx\n", in_be64(p), origin); + out_be64(p, origin); +} + +static inline void +set_iocmd_config(void __iomem *base) +{ + unsigned long __iomem *p = base + 0xc00; + unsigned long conf; + + conf = in_be64(p); + pr_debug("iost_conf %016lx, now %016lx\n", conf, conf | IOCMD_CONF_TE); + out_be64(p, conf | IOCMD_CONF_TE); +} + +/* FIXME: get these from the device tree */ +#define ioc_base 0x20000511000ull +#define ioc_mmio_base 0x20000510000ull +#define ioid 0x48a +#define iopt_phys_offset (- 0x20000000) /* We have a 512MB offset from the SB */ +#define io_page_size 0x1000000 + +static unsigned long map_iopt_entry(unsigned long address) +{ + switch (address >> 20) { + case 0x600: + address = 0x24020000000ull; /* spider i/o */ + break; + default: + address += iopt_phys_offset; + break; + } + + return get_iopt_entry(address, ioid, IOPT_PROT_RW); +} + +static void iommu_bus_setup_null(struct pci_bus *b) { } +static void iommu_dev_setup_null(struct pci_dev *d) { } + +/* initialize the iommu to support a simple linear mapping + * for each DMA window used by any device. For now, we + * happen to know that there is only one DMA window in use, + * starting at iopt_phys_offset. */ +static void cell_map_iommu(void) +{ + unsigned long address; + void __iomem *base; + ioste ioste; + unsigned long index; + + base = __ioremap(ioc_base, 0x1000, _PAGE_NO_CACHE); + pr_debug("%lx mapped to %p\n", ioc_base, base); + set_iocmd_config(base); + iounmap(base); + + base = __ioremap(ioc_mmio_base, 0x1000, _PAGE_NO_CACHE); + pr_debug("%lx mapped to %p\n", ioc_mmio_base, base); + + set_iost_origin(base); + + for (address = 0; address < 0x100000000ul; address += io_page_size) { + ioste = get_iost_entry(0x10000000000ul, address, io_page_size); + if ((address & 0xfffffff) == 0) /* segment start */ + set_iost_cache(base, address >> 28, ioste); + index = get_ioc_hash_1way(ioste, address); + pr_debug("addr %08lx, index %02lx, ioste %016lx\n", + address, index, ioste.val); + set_iopt_cache(base, + get_ioc_hash_1way(ioste, address), + get_ioc_tag(ioste, address), + map_iopt_entry(address)); + } + iounmap(base); +} + + +static void *cell_alloc_coherent(struct device *hwdev, size_t size, + dma_addr_t *dma_handle, gfp_t flag) +{ + void *ret; + + ret = (void *)__get_free_pages(flag, get_order(size)); + if (ret != NULL) { + memset(ret, 0, size); + *dma_handle = virt_to_abs(ret) | CELL_DMA_VALID; + } + return ret; +} + +static void cell_free_coherent(struct device *hwdev, size_t size, + void *vaddr, dma_addr_t dma_handle) +{ + free_pages((unsigned long)vaddr, get_order(size)); +} + +static dma_addr_t cell_map_single(struct device *hwdev, void *ptr, + size_t size, enum dma_data_direction direction) +{ + return virt_to_abs(ptr) | CELL_DMA_VALID; +} + +static void cell_unmap_single(struct device *hwdev, dma_addr_t dma_addr, + size_t size, enum dma_data_direction direction) +{ +} + +static int cell_map_sg(struct device *hwdev, struct scatterlist *sg, + int nents, enum dma_data_direction direction) +{ + int i; + + for (i = 0; i < nents; i++, sg++) { + sg->dma_address = (page_to_phys(sg->page) + sg->offset) + | CELL_DMA_VALID; + sg->dma_length = sg->length; + } + + return nents; +} + +static void cell_unmap_sg(struct device *hwdev, struct scatterlist *sg, + int nents, enum dma_data_direction direction) +{ +} + +static int cell_dma_supported(struct device *dev, u64 mask) +{ + return mask < 0x100000000ull; +} + +void cell_init_iommu(void) +{ + cell_map_iommu(); + + /* Direct I/O, IOMMU off */ + ppc_md.iommu_dev_setup = iommu_dev_setup_null; + ppc_md.iommu_bus_setup = iommu_bus_setup_null; + + pci_dma_ops.alloc_coherent = cell_alloc_coherent; + pci_dma_ops.free_coherent = cell_free_coherent; + pci_dma_ops.map_single = cell_map_single; + pci_dma_ops.unmap_single = cell_unmap_single; + pci_dma_ops.map_sg = cell_map_sg; + pci_dma_ops.unmap_sg = cell_unmap_sg; + pci_dma_ops.dma_supported = cell_dma_supported; +} diff --git a/arch/powerpc/platforms/cell/iommu.h b/arch/powerpc/platforms/cell/iommu.h new file mode 100644 index 00000000000..490d77abfe8 --- /dev/null +++ b/arch/powerpc/platforms/cell/iommu.h @@ -0,0 +1,65 @@ +#ifndef CELL_IOMMU_H +#define CELL_IOMMU_H + +/* some constants */ +enum { + /* segment table entries */ + IOST_VALID_MASK = 0x8000000000000000ul, + IOST_TAG_MASK = 0x3000000000000000ul, + IOST_PT_BASE_MASK = 0x000003fffffff000ul, + IOST_NNPT_MASK = 0x0000000000000fe0ul, + IOST_PS_MASK = 0x000000000000000ful, + + IOST_PS_4K = 0x1, + IOST_PS_64K = 0x3, + IOST_PS_1M = 0x5, + IOST_PS_16M = 0x7, + + /* iopt tag register */ + IOPT_VALID_MASK = 0x0000000200000000ul, + IOPT_TAG_MASK = 0x00000001fffffffful, + + /* iopt cache register */ + IOPT_PROT_MASK = 0xc000000000000000ul, + IOPT_PROT_NONE = 0x0000000000000000ul, + IOPT_PROT_READ = 0x4000000000000000ul, + IOPT_PROT_WRITE = 0x8000000000000000ul, + IOPT_PROT_RW = 0xc000000000000000ul, + IOPT_COHERENT = 0x2000000000000000ul, + + IOPT_ORDER_MASK = 0x1800000000000000ul, + /* order access to same IOID/VC on same address */ + IOPT_ORDER_ADDR = 0x0800000000000000ul, + /* similar, but only after a write access */ + IOPT_ORDER_WRITES = 0x1000000000000000ul, + /* Order all accesses to same IOID/VC */ + IOPT_ORDER_VC = 0x1800000000000000ul, + + IOPT_RPN_MASK = 0x000003fffffff000ul, + IOPT_HINT_MASK = 0x0000000000000800ul, + IOPT_IOID_MASK = 0x00000000000007fful, + + IOSTO_ENABLE = 0x8000000000000000ul, + IOSTO_ORIGIN = 0x000003fffffff000ul, + IOSTO_HW = 0x0000000000000800ul, + IOSTO_SW = 0x0000000000000400ul, + + IOCMD_CONF_TE = 0x0000800000000000ul, + + /* memory mapped registers */ + IOC_PT_CACHE_DIR = 0x000, + IOC_ST_CACHE_DIR = 0x800, + IOC_PT_CACHE_REG = 0x910, + IOC_ST_ORIGIN = 0x918, + IOC_CONF = 0x930, + + /* The high bit needs to be set on every DMA address, + only 2GB are addressable */ + CELL_DMA_VALID = 0x80000000, + CELL_DMA_MASK = 0x7fffffff, +}; + + +void cell_init_iommu(void); + +#endif diff --git a/arch/powerpc/platforms/cell/setup.c b/arch/powerpc/platforms/cell/setup.c new file mode 100644 index 00000000000..9a495634d0c --- /dev/null +++ b/arch/powerpc/platforms/cell/setup.c @@ -0,0 +1,141 @@ +/* + * linux/arch/powerpc/platforms/cell/cell_setup.c + * + * Copyright (C) 1995 Linus Torvalds + * Adapted from 'alpha' version by Gary Thomas + * Modified by Cort Dougan (cort@cs.nmt.edu) + * Modified by PPC64 Team, IBM Corp + * Modified by Cell Team, IBM Deutschland Entwicklung GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#undef DEBUG + +#include <linux/config.h> +#include <linux/sched.h> +#include <linux/kernel.h> +#include <linux/mm.h> +#include <linux/stddef.h> +#include <linux/unistd.h> +#include <linux/slab.h> +#include <linux/user.h> +#include <linux/reboot.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/irq.h> +#include <linux/seq_file.h> +#include <linux/root_dev.h> +#include <linux/console.h> + +#include <asm/mmu.h> +#include <asm/processor.h> +#include <asm/io.h> +#include <asm/pgtable.h> +#include <asm/prom.h> +#include <asm/rtas.h> +#include <asm/pci-bridge.h> +#include <asm/iommu.h> +#include <asm/dma.h> +#include <asm/machdep.h> +#include <asm/time.h> +#include <asm/nvram.h> +#include <asm/cputable.h> +#include <asm/ppc-pci.h> +#include <asm/irq.h> + +#include "interrupt.h" +#include "iommu.h" + +#ifdef DEBUG +#define DBG(fmt...) udbg_printf(fmt) +#else +#define DBG(fmt...) +#endif + +void cell_show_cpuinfo(struct seq_file *m) +{ + struct device_node *root; + const char *model = ""; + + root = of_find_node_by_path("/"); + if (root) + model = get_property(root, "model", NULL); + seq_printf(m, "machine\t\t: CHRP %s\n", model); + of_node_put(root); +} + +static void cell_progress(char *s, unsigned short hex) +{ + printk("*** %04x : %s\n", hex, s ? s : ""); +} + +static void __init cell_setup_arch(void) +{ + ppc_md.init_IRQ = iic_init_IRQ; + ppc_md.get_irq = iic_get_irq; + +#ifdef CONFIG_SMP + smp_init_cell(); +#endif + + /* init to some ~sane value until calibrate_delay() runs */ + loops_per_jiffy = 50000000; + + if (ROOT_DEV == 0) { + printk("No ramdisk, default root is /dev/hda2\n"); + ROOT_DEV = Root_HDA2; + } + + /* Find and initialize PCI host bridges */ + init_pci_config_tokens(); + find_and_init_phbs(); + spider_init_IRQ(); +#ifdef CONFIG_DUMMY_CONSOLE + conswitchp = &dummy_con; +#endif + + mmio_nvram_init(); +} + +/* + * Early initialization. Relocation is on but do not reference unbolted pages + */ +static void __init cell_init_early(void) +{ + DBG(" -> cell_init_early()\n"); + + hpte_init_native(); + + cell_init_iommu(); + + ppc64_interrupt_controller = IC_CELL_PIC; + + DBG(" <- cell_init_early()\n"); +} + + +static int __init cell_probe(int platform) +{ + if (platform != PLATFORM_CELL) + return 0; + + return 1; +} + +struct machdep_calls __initdata cell_md = { + .probe = cell_probe, + .setup_arch = cell_setup_arch, + .init_early = cell_init_early, + .show_cpuinfo = cell_show_cpuinfo, + .restart = rtas_restart, + .power_off = rtas_power_off, + .halt = rtas_halt, + .get_boot_time = rtas_get_boot_time, + .get_rtc_time = rtas_get_rtc_time, + .set_rtc_time = rtas_set_rtc_time, + .calibrate_decr = generic_calibrate_decr, + .progress = cell_progress, +}; diff --git a/arch/powerpc/platforms/cell/smp.c b/arch/powerpc/platforms/cell/smp.c new file mode 100644 index 00000000000..de96eadf419 --- /dev/null +++ b/arch/powerpc/platforms/cell/smp.c @@ -0,0 +1,230 @@ +/* + * SMP support for BPA machines. + * + * Dave Engebretsen, Peter Bergner, and + * Mike Corrigan {engebret|bergner|mikec}@us.ibm.com + * + * Plus various changes from other IBM teams... + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#undef DEBUG + +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/sched.h> +#include <linux/smp.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/spinlock.h> +#include <linux/cache.h> +#include <linux/err.h> +#include <linux/sysdev.h> +#include <linux/cpu.h> + +#include <asm/ptrace.h> +#include <asm/atomic.h> +#include <asm/irq.h> +#include <asm/page.h> +#include <asm/pgtable.h> +#include <asm/io.h> +#include <asm/prom.h> +#include <asm/smp.h> +#include <asm/paca.h> +#include <asm/time.h> +#include <asm/machdep.h> +#include <asm/cputable.h> +#include <asm/firmware.h> +#include <asm/system.h> +#include <asm/rtas.h> + +#include "interrupt.h" + +#ifdef DEBUG +#define DBG(fmt...) udbg_printf(fmt) +#else +#define DBG(fmt...) +#endif + +/* + * The primary thread of each non-boot processor is recorded here before + * smp init. + */ +static cpumask_t of_spin_map; + +extern void pSeries_secondary_smp_init(unsigned long); + +/** + * smp_startup_cpu() - start the given cpu + * + * At boot time, there is nothing to do for primary threads which were + * started from Open Firmware. For anything else, call RTAS with the + * appropriate start location. + * + * Returns: + * 0 - failure + * 1 - success + */ +static inline int __devinit smp_startup_cpu(unsigned int lcpu) +{ + int status; + unsigned long start_here = __pa((u32)*((unsigned long *) + pSeries_secondary_smp_init)); + unsigned int pcpu; + int start_cpu; + + if (cpu_isset(lcpu, of_spin_map)) + /* Already started by OF and sitting in spin loop */ + return 1; + + pcpu = get_hard_smp_processor_id(lcpu); + + /* Fixup atomic count: it exited inside IRQ handler. */ + paca[lcpu].__current->thread_info->preempt_count = 0; + + /* + * If the RTAS start-cpu token does not exist then presume the + * cpu is already spinning. + */ + start_cpu = rtas_token("start-cpu"); + if (start_cpu == RTAS_UNKNOWN_SERVICE) + return 1; + + status = rtas_call(start_cpu, 3, 1, NULL, pcpu, start_here, lcpu); + if (status != 0) { + printk(KERN_ERR "start-cpu failed: %i\n", status); + return 0; + } + + return 1; +} + +static void smp_iic_message_pass(int target, int msg) +{ + unsigned int i; + + if (target < NR_CPUS) { + iic_cause_IPI(target, msg); + } else { + for_each_online_cpu(i) { + if (target == MSG_ALL_BUT_SELF + && i == smp_processor_id()) + continue; + iic_cause_IPI(i, msg); + } + } +} + +static int __init smp_iic_probe(void) +{ + iic_request_IPIs(); + + return cpus_weight(cpu_possible_map); +} + +static void __devinit smp_iic_setup_cpu(int cpu) +{ + if (cpu != boot_cpuid) + iic_setup_cpu(); +} + +static DEFINE_SPINLOCK(timebase_lock); +static unsigned long timebase = 0; + +static void __devinit cell_give_timebase(void) +{ + spin_lock(&timebase_lock); + rtas_call(rtas_token("freeze-time-base"), 0, 1, NULL); + timebase = get_tb(); + spin_unlock(&timebase_lock); + + while (timebase) + barrier(); + rtas_call(rtas_token("thaw-time-base"), 0, 1, NULL); +} + +static void __devinit cell_take_timebase(void) +{ + while (!timebase) + barrier(); + spin_lock(&timebase_lock); + set_tb(timebase >> 32, timebase & 0xffffffff); + timebase = 0; + spin_unlock(&timebase_lock); +} + +static void __devinit smp_cell_kick_cpu(int nr) +{ + BUG_ON(nr < 0 || nr >= NR_CPUS); + + if (!smp_startup_cpu(nr)) + return; + + /* + * The processor is currently spinning, waiting for the + * cpu_start field to become non-zero After we set cpu_start, + * the processor will continue on to secondary_start + */ + paca[nr].cpu_start = 1; +} + +static int smp_cell_cpu_bootable(unsigned int nr) +{ + /* Special case - we inhibit secondary thread startup + * during boot if the user requests it. Odd-numbered + * cpus are assumed to be secondary threads. + */ + if (system_state < SYSTEM_RUNNING && + cpu_has_feature(CPU_FTR_SMT) && + !smt_enabled_at_boot && nr % 2 != 0) + return 0; + + return 1; +} +static struct smp_ops_t bpa_iic_smp_ops = { + .message_pass = smp_iic_message_pass, + .probe = smp_iic_probe, + .kick_cpu = smp_cell_kick_cpu, + .setup_cpu = smp_iic_setup_cpu, + .cpu_bootable = smp_cell_cpu_bootable, +}; + +/* This is called very early */ +void __init smp_init_cell(void) +{ + int i; + + DBG(" -> smp_init_cell()\n"); + + smp_ops = &bpa_iic_smp_ops; + + /* Mark threads which are still spinning in hold loops. */ + if (cpu_has_feature(CPU_FTR_SMT)) { + for_each_present_cpu(i) { + if (i % 2 == 0) + /* + * Even-numbered logical cpus correspond to + * primary threads. + */ + cpu_set(i, of_spin_map); + } + } else { + of_spin_map = cpu_present_map; + } + + cpu_clear(boot_cpuid, of_spin_map); + + /* Non-lpar has additional take/give timebase */ + if (rtas_token("freeze-time-base") != RTAS_UNKNOWN_SERVICE) { + smp_ops->give_timebase = cell_give_timebase; + smp_ops->take_timebase = cell_take_timebase; + } + + DBG(" <- smp_init_cell()\n"); +} diff --git a/arch/powerpc/platforms/cell/spider-pic.c b/arch/powerpc/platforms/cell/spider-pic.c new file mode 100644 index 00000000000..e74132188bd --- /dev/null +++ b/arch/powerpc/platforms/cell/spider-pic.c @@ -0,0 +1,191 @@ +/* + * External Interrupt Controller on Spider South Bridge + * + * (C) Copyright IBM Deutschland Entwicklung GmbH 2005 + * + * Author: Arnd Bergmann <arndb@de.ibm.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/interrupt.h> +#include <linux/irq.h> + +#include <asm/pgtable.h> +#include <asm/prom.h> +#include <asm/io.h> + +#include "interrupt.h" + +/* register layout taken from Spider spec, table 7.4-4 */ +enum { + TIR_DEN = 0x004, /* Detection Enable Register */ + TIR_MSK = 0x084, /* Mask Level Register */ + TIR_EDC = 0x0c0, /* Edge Detection Clear Register */ + TIR_PNDA = 0x100, /* Pending Register A */ + TIR_PNDB = 0x104, /* Pending Register B */ + TIR_CS = 0x144, /* Current Status Register */ + TIR_LCSA = 0x150, /* Level Current Status Register A */ + TIR_LCSB = 0x154, /* Level Current Status Register B */ + TIR_LCSC = 0x158, /* Level Current Status Register C */ + TIR_LCSD = 0x15c, /* Level Current Status Register D */ + TIR_CFGA = 0x200, /* Setting Register A0 */ + TIR_CFGB = 0x204, /* Setting Register B0 */ + /* 0x208 ... 0x3ff Setting Register An/Bn */ + TIR_PPNDA = 0x400, /* Packet Pending Register A */ + TIR_PPNDB = 0x404, /* Packet Pending Register B */ + TIR_PIERA = 0x408, /* Packet Output Error Register A */ + TIR_PIERB = 0x40c, /* Packet Output Error Register B */ + TIR_PIEN = 0x444, /* Packet Output Enable Register */ + TIR_PIPND = 0x454, /* Packet Output Pending Register */ + TIRDID = 0x484, /* Spider Device ID Register */ + REISTIM = 0x500, /* Reissue Command Timeout Time Setting */ + REISTIMEN = 0x504, /* Reissue Command Timeout Setting */ + REISWAITEN = 0x508, /* Reissue Wait Control*/ +}; + +static void __iomem *spider_pics[4]; + +static void __iomem *spider_get_pic(int irq) +{ + int node = irq / IIC_NODE_STRIDE; + irq %= IIC_NODE_STRIDE; + + if (irq >= IIC_EXT_OFFSET && + irq < IIC_EXT_OFFSET + IIC_NUM_EXT && + spider_pics) + return spider_pics[node]; + return NULL; +} + +static int spider_get_nr(unsigned int irq) +{ + return (irq % IIC_NODE_STRIDE) - IIC_EXT_OFFSET; +} + +static void __iomem *spider_get_irq_config(int irq) +{ + void __iomem *pic; + pic = spider_get_pic(irq); + return pic + TIR_CFGA + 8 * spider_get_nr(irq); +} + +static void spider_enable_irq(unsigned int irq) +{ + void __iomem *cfg = spider_get_irq_config(irq); + irq = spider_get_nr(irq); + + out_be32(cfg, in_be32(cfg) | 0x3107000eu); + out_be32(cfg + 4, in_be32(cfg + 4) | 0x00020000u | irq); +} + +static void spider_disable_irq(unsigned int irq) +{ + void __iomem *cfg = spider_get_irq_config(irq); + irq = spider_get_nr(irq); + + out_be32(cfg, in_be32(cfg) & ~0x30000000u); +} + +static unsigned int spider_startup_irq(unsigned int irq) +{ + spider_enable_irq(irq); + return 0; +} + +static void spider_shutdown_irq(unsigned int irq) +{ + spider_disable_irq(irq); +} + +static void spider_end_irq(unsigned int irq) +{ + spider_enable_irq(irq); +} + +static void spider_ack_irq(unsigned int irq) +{ + spider_disable_irq(irq); + iic_local_enable(); +} + +static struct hw_interrupt_type spider_pic = { + .typename = " SPIDER ", + .startup = spider_startup_irq, + .shutdown = spider_shutdown_irq, + .enable = spider_enable_irq, + .disable = spider_disable_irq, + .ack = spider_ack_irq, + .end = spider_end_irq, +}; + + +int spider_get_irq(unsigned long int_pending) +{ + void __iomem *regs = spider_get_pic(int_pending); + unsigned long cs; + int irq; + + cs = in_be32(regs + TIR_CS); + + irq = cs >> 24; + if (irq != 63) + return irq; + + return -1; +} + +void spider_init_IRQ(void) +{ + int node; + struct device_node *dn; + unsigned int *property; + long spiderpic; + int n; + +/* FIXME: detect multiple PICs as soon as the device tree has them */ + for (node = 0; node < 1; node++) { + dn = of_find_node_by_path("/"); + n = prom_n_addr_cells(dn); + property = (unsigned int *) get_property(dn, + "platform-spider-pic", NULL); + + if (!property) + continue; + for (spiderpic = 0; n > 0; --n) + spiderpic = (spiderpic << 32) + *property++; + printk(KERN_DEBUG "SPIDER addr: %lx\n", spiderpic); + spider_pics[node] = __ioremap(spiderpic, 0x800, _PAGE_NO_CACHE); + for (n = 0; n < IIC_NUM_EXT; n++) { + int irq = n + IIC_EXT_OFFSET + node * IIC_NODE_STRIDE; + get_irq_desc(irq)->handler = &spider_pic; + + /* do not mask any interrupts because of level */ + out_be32(spider_pics[node] + TIR_MSK, 0x0); + + /* disable edge detection clear */ + /* out_be32(spider_pics[node] + TIR_EDC, 0x0); */ + + /* enable interrupt packets to be output */ + out_be32(spider_pics[node] + TIR_PIEN, + in_be32(spider_pics[node] + TIR_PIEN) | 0x1); + + /* Enable the interrupt detection enable bit. Do this last! */ + out_be32(spider_pics[node] + TIR_DEN, + in_be32(spider_pics[node] +TIR_DEN) | 0x1); + + } + } +} diff --git a/arch/powerpc/platforms/chrp/nvram.c b/arch/powerpc/platforms/chrp/nvram.c index 4ac7125aa09..150f67d6f90 100644 --- a/arch/powerpc/platforms/chrp/nvram.c +++ b/arch/powerpc/platforms/chrp/nvram.c @@ -17,6 +17,7 @@ #include <asm/uaccess.h> #include <asm/prom.h> #include <asm/machdep.h> +#include <asm/rtas.h> #include "chrp.h" static unsigned int nvram_size; @@ -25,7 +26,8 @@ static DEFINE_SPINLOCK(nvram_lock); static unsigned char chrp_nvram_read(int addr) { - unsigned long done, flags; + unsigned int done; + unsigned long flags; unsigned char ret; if (addr >= nvram_size) { @@ -34,7 +36,8 @@ static unsigned char chrp_nvram_read(int addr) return 0xff; } spin_lock_irqsave(&nvram_lock, flags); - if ((call_rtas("nvram-fetch", 3, 2, &done, addr, __pa(nvram_buf), 1) != 0) || 1 != done) + if ((rtas_call(rtas_token("nvram-fetch"), 3, 2, &done, addr, + __pa(nvram_buf), 1) != 0) || 1 != done) ret = 0xff; else ret = nvram_buf[0]; @@ -45,7 +48,8 @@ static unsigned char chrp_nvram_read(int addr) static void chrp_nvram_write(int addr, unsigned char val) { - unsigned long done, flags; + unsigned int done; + unsigned long flags; if (addr >= nvram_size) { printk(KERN_DEBUG "%s: write addr %d > nvram_size %u\n", @@ -54,7 +58,8 @@ static void chrp_nvram_write(int addr, unsigned char val) } spin_lock_irqsave(&nvram_lock, flags); nvram_buf[0] = val; - if ((call_rtas("nvram-store", 3, 2, &done, addr, __pa(nvram_buf), 1) != 0) || 1 != done) + if ((rtas_call(rtas_token("nvram-store"), 3, 2, &done, addr, + __pa(nvram_buf), 1) != 0) || 1 != done) printk(KERN_DEBUG "rtas IO error storing 0x%02x at %d", val, addr); spin_unlock_irqrestore(&nvram_lock, flags); } diff --git a/arch/powerpc/platforms/chrp/pegasos_eth.c b/arch/powerpc/platforms/chrp/pegasos_eth.c index a9052305c35..29c86781c49 100644 --- a/arch/powerpc/platforms/chrp/pegasos_eth.c +++ b/arch/powerpc/platforms/chrp/pegasos_eth.c @@ -14,6 +14,7 @@ #include <linux/init.h> #include <linux/ioport.h> #include <linux/device.h> +#include <linux/platform_device.h> #include <linux/mv643xx.h> #include <linux/pci.h> diff --git a/arch/powerpc/platforms/chrp/smp.c b/arch/powerpc/platforms/chrp/smp.c index 31ee49c2501..bb2315997d4 100644 --- a/arch/powerpc/platforms/chrp/smp.c +++ b/arch/powerpc/platforms/chrp/smp.c @@ -35,43 +35,6 @@ #include <asm/smp.h> #include <asm/mpic.h> -extern unsigned long smp_chrp_cpu_nr; - -static int __init smp_chrp_probe(void) -{ - struct device_node *cpus = NULL; - unsigned int *reg; - int reglen; - int ncpus = 0; - int cpuid; - unsigned int phys; - - /* Count CPUs in the device-tree */ - cpuid = 1; /* the boot cpu is logical cpu 0 */ - while ((cpus = of_find_node_by_type(cpus, "cpu")) != NULL) { - phys = ncpus; - reg = (unsigned int *) get_property(cpus, "reg", ®len); - if (reg && reglen >= sizeof(unsigned int)) - /* hmmm, not having a reg property would be bad */ - phys = *reg; - if (phys != boot_cpuid_phys) { - set_hard_smp_processor_id(cpuid, phys); - ++cpuid; - } - ++ncpus; - } - - printk(KERN_INFO "CHRP SMP probe found %d cpus\n", ncpus); - - /* Nothing more to do if less than 2 of them */ - if (ncpus <= 1) - return 1; - - mpic_request_ipis(); - - return ncpus; -} - static void __devinit smp_chrp_kick_cpu(int nr) { *(unsigned long *)KERNELBASE = nr; @@ -114,7 +77,7 @@ void __devinit smp_chrp_take_timebase(void) /* CHRP with openpic */ struct smp_ops_t chrp_smp_ops = { .message_pass = smp_mpic_message_pass, - .probe = smp_chrp_probe, + .probe = smp_mpic_probe, .kick_cpu = smp_chrp_kick_cpu, .setup_cpu = smp_chrp_setup_cpu, .give_timebase = smp_chrp_give_timebase, diff --git a/arch/powerpc/platforms/iseries/call_hpt.h b/arch/powerpc/platforms/iseries/call_hpt.h index 321f3bb7a8f..a843b0f87b7 100644 --- a/arch/powerpc/platforms/iseries/call_hpt.h +++ b/arch/powerpc/platforms/iseries/call_hpt.h @@ -23,8 +23,8 @@ * drive the hypervisor from the OS. */ -#include <asm/iSeries/HvCallSc.h> -#include <asm/iSeries/HvTypes.h> +#include <asm/iseries/hv_call_sc.h> +#include <asm/iseries/hv_types.h> #include <asm/mmu.h> #define HvCallHptGetHptAddress HvCallHpt + 0 diff --git a/arch/powerpc/platforms/iseries/call_pci.h b/arch/powerpc/platforms/iseries/call_pci.h index a86e065b957..59d4e0ad5cf 100644 --- a/arch/powerpc/platforms/iseries/call_pci.h +++ b/arch/powerpc/platforms/iseries/call_pci.h @@ -25,8 +25,8 @@ #ifndef _PLATFORMS_ISERIES_CALL_PCI_H #define _PLATFORMS_ISERIES_CALL_PCI_H -#include <asm/iSeries/HvCallSc.h> -#include <asm/iSeries/HvTypes.h> +#include <asm/iseries/hv_call_sc.h> +#include <asm/iseries/hv_types.h> /* * DSA == Direct Select Address diff --git a/arch/powerpc/platforms/iseries/call_sm.h b/arch/powerpc/platforms/iseries/call_sm.h index ef223166cf2..c7e251619f4 100644 --- a/arch/powerpc/platforms/iseries/call_sm.h +++ b/arch/powerpc/platforms/iseries/call_sm.h @@ -23,8 +23,8 @@ * drive the hypervisor from the OS. */ -#include <asm/iSeries/HvCallSc.h> -#include <asm/iSeries/HvTypes.h> +#include <asm/iseries/hv_call_sc.h> +#include <asm/iseries/hv_types.h> #define HvCallSmGet64BitsOfAccessMap HvCallSm + 11 diff --git a/arch/powerpc/platforms/iseries/hvlog.c b/arch/powerpc/platforms/iseries/hvlog.c index f61e2e9ac9e..62ec7347968 100644 --- a/arch/powerpc/platforms/iseries/hvlog.c +++ b/arch/powerpc/platforms/iseries/hvlog.c @@ -9,9 +9,9 @@ #include <asm/page.h> #include <asm/abs_addr.h> -#include <asm/iSeries/HvCall.h> -#include <asm/iSeries/HvCallSc.h> -#include <asm/iSeries/HvTypes.h> +#include <asm/iseries/hv_call.h> +#include <asm/iseries/hv_call_sc.h> +#include <asm/iseries/hv_types.h> void HvCall_writeLogBuffer(const void *buffer, u64 len) diff --git a/arch/powerpc/platforms/iseries/hvlpconfig.c b/arch/powerpc/platforms/iseries/hvlpconfig.c index dc28621aea0..663a1affb4b 100644 --- a/arch/powerpc/platforms/iseries/hvlpconfig.c +++ b/arch/powerpc/platforms/iseries/hvlpconfig.c @@ -17,7 +17,7 @@ */ #include <linux/module.h> -#include <asm/iSeries/HvLpConfig.h> +#include <asm/iseries/hv_lp_config.h> HvLpIndex HvLpConfig_getLpIndex_outline(void) { diff --git a/arch/powerpc/platforms/iseries/iommu.c b/arch/powerpc/platforms/iseries/iommu.c index 1db26d8be64..1a6845b5c5a 100644 --- a/arch/powerpc/platforms/iseries/iommu.c +++ b/arch/powerpc/platforms/iseries/iommu.c @@ -32,7 +32,7 @@ #include <asm/machdep.h> #include <asm/abs_addr.h> #include <asm/pci-bridge.h> -#include <asm/iSeries/HvCallXm.h> +#include <asm/iseries/hv_call_xm.h> extern struct list_head iSeries_Global_Device_List; diff --git a/arch/powerpc/platforms/iseries/irq.c b/arch/powerpc/platforms/iseries/irq.c index 937ac99b9d3..c1135912cc0 100644 --- a/arch/powerpc/platforms/iseries/irq.c +++ b/arch/powerpc/platforms/iseries/irq.c @@ -36,9 +36,9 @@ #include <linux/spinlock.h> #include <asm/ppcdebug.h> -#include <asm/iSeries/HvTypes.h> -#include <asm/iSeries/HvLpEvent.h> -#include <asm/iSeries/HvCallXm.h> +#include <asm/iseries/hv_types.h> +#include <asm/iseries/hv_lp_event.h> +#include <asm/iseries/hv_call_xm.h> #include "irq.h" #include "call_pci.h" diff --git a/arch/powerpc/platforms/iseries/ksyms.c b/arch/powerpc/platforms/iseries/ksyms.c index f271b353972..a2200842f4e 100644 --- a/arch/powerpc/platforms/iseries/ksyms.c +++ b/arch/powerpc/platforms/iseries/ksyms.c @@ -9,7 +9,7 @@ #include <linux/module.h> #include <asm/hw_irq.h> -#include <asm/iSeries/HvCallSc.h> +#include <asm/iseries/hv_call_sc.h> EXPORT_SYMBOL(HvCall0); EXPORT_SYMBOL(HvCall1); diff --git a/arch/powerpc/platforms/iseries/lpardata.c b/arch/powerpc/platforms/iseries/lpardata.c index ed2ffee6f73..bb8c91537f3 100644 --- a/arch/powerpc/platforms/iseries/lpardata.c +++ b/arch/powerpc/platforms/iseries/lpardata.c @@ -13,16 +13,16 @@ #include <linux/bitops.h> #include <asm/processor.h> #include <asm/ptrace.h> -#include <asm/naca.h> #include <asm/abs_addr.h> -#include <asm/iSeries/ItLpNaca.h> +#include <asm/iseries/it_lp_naca.h> #include <asm/lppaca.h> -#include <asm/iSeries/ItLpRegSave.h> +#include <asm/iseries/it_lp_reg_save.h> #include <asm/paca.h> -#include <asm/iSeries/LparMap.h> -#include <asm/iSeries/ItExtVpdPanel.h> -#include <asm/iSeries/ItLpQueue.h> +#include <asm/iseries/lpar_map.h> +#include <asm/iseries/it_exp_vpd_panel.h> +#include <asm/iseries/it_lp_queue.h> +#include "naca.h" #include "vpd_areas.h" #include "spcomm_area.h" #include "ipl_parms.h" diff --git a/arch/powerpc/platforms/iseries/lpevents.c b/arch/powerpc/platforms/iseries/lpevents.c index 54c7753dbe0..e9fb98bf895 100644 --- a/arch/powerpc/platforms/iseries/lpevents.c +++ b/arch/powerpc/platforms/iseries/lpevents.c @@ -17,10 +17,10 @@ #include <asm/system.h> #include <asm/paca.h> -#include <asm/iSeries/ItLpQueue.h> -#include <asm/iSeries/HvLpEvent.h> -#include <asm/iSeries/HvCallEvent.h> -#include <asm/iSeries/ItLpNaca.h> +#include <asm/iseries/it_lp_queue.h> +#include <asm/iseries/hv_lp_event.h> +#include <asm/iseries/hv_call_event.h> +#include <asm/iseries/it_lp_naca.h> /* * The LpQueue is used to pass event data from the hypervisor to diff --git a/arch/powerpc/platforms/iseries/mf.c b/arch/powerpc/platforms/iseries/mf.c index e5de31aa001..49e7e4b8584 100644 --- a/arch/powerpc/platforms/iseries/mf.c +++ b/arch/powerpc/platforms/iseries/mf.c @@ -38,10 +38,10 @@ #include <asm/uaccess.h> #include <asm/paca.h> #include <asm/abs_addr.h> -#include <asm/iSeries/vio.h> -#include <asm/iSeries/mf.h> -#include <asm/iSeries/HvLpConfig.h> -#include <asm/iSeries/ItLpQueue.h> +#include <asm/iseries/vio.h> +#include <asm/iseries/mf.h> +#include <asm/iseries/hv_lp_config.h> +#include <asm/iseries/it_lp_queue.h> #include "setup.h" diff --git a/arch/powerpc/platforms/iseries/naca.h b/arch/powerpc/platforms/iseries/naca.h new file mode 100644 index 00000000000..ab2372eb8d2 --- /dev/null +++ b/arch/powerpc/platforms/iseries/naca.h @@ -0,0 +1,24 @@ +#ifndef _PLATFORMS_ISERIES_NACA_H +#define _PLATFORMS_ISERIES_NACA_H + +/* + * c 2001 PPC 64 Team, IBM Corp + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <asm/types.h> + +struct naca_struct { + /* Kernel only data - undefined for user space */ + void *xItVpdAreas; /* VPD Data 0x00 */ + void *xRamDisk; /* iSeries ramdisk 0x08 */ + u64 xRamDiskSize; /* In pages 0x10 */ +}; + +extern struct naca_struct naca; + +#endif /* _PLATFORMS_ISERIES_NACA_H */ diff --git a/arch/powerpc/platforms/iseries/pci.c b/arch/powerpc/platforms/iseries/pci.c index 959e59fd9c1..7d7d5884343 100644 --- a/arch/powerpc/platforms/iseries/pci.c +++ b/arch/powerpc/platforms/iseries/pci.c @@ -36,8 +36,8 @@ #include <asm/iommu.h> #include <asm/abs_addr.h> -#include <asm/iSeries/HvCallXm.h> -#include <asm/iSeries/mf.h> +#include <asm/iseries/hv_call_xm.h> +#include <asm/iseries/mf.h> #include <asm/ppc-pci.h> diff --git a/arch/powerpc/platforms/iseries/proc.c b/arch/powerpc/platforms/iseries/proc.c index 6f1929cac66..e68b6b5fa89 100644 --- a/arch/powerpc/platforms/iseries/proc.c +++ b/arch/powerpc/platforms/iseries/proc.c @@ -24,8 +24,8 @@ #include <asm/processor.h> #include <asm/time.h> #include <asm/lppaca.h> -#include <asm/iSeries/ItLpQueue.h> -#include <asm/iSeries/HvCallXm.h> +#include <asm/iseries/it_lp_queue.h> +#include <asm/iseries/hv_call_xm.h> #include "processor_vpd.h" #include "main_store.h" diff --git a/arch/powerpc/platforms/iseries/release_data.h b/arch/powerpc/platforms/iseries/release_data.h index c68b9c3e5ca..66189fd2e32 100644 --- a/arch/powerpc/platforms/iseries/release_data.h +++ b/arch/powerpc/platforms/iseries/release_data.h @@ -24,7 +24,7 @@ * address of the OS's NACA). */ #include <asm/types.h> -#include <asm/naca.h> +#include "naca.h" /* * When we IPL a secondary partition, we will check if if the diff --git a/arch/powerpc/platforms/iseries/setup.c b/arch/powerpc/platforms/iseries/setup.c index 1544c6f10a3..fda712b4216 100644 --- a/arch/powerpc/platforms/iseries/setup.c +++ b/arch/powerpc/platforms/iseries/setup.c @@ -27,6 +27,7 @@ #include <linux/kdev_t.h> #include <linux/major.h> #include <linux/root_dev.h> +#include <linux/kernel.h> #include <asm/processor.h> #include <asm/machdep.h> @@ -40,19 +41,19 @@ #include <asm/firmware.h> #include <asm/time.h> -#include <asm/naca.h> #include <asm/paca.h> #include <asm/cache.h> #include <asm/sections.h> #include <asm/abs_addr.h> -#include <asm/iSeries/HvLpConfig.h> -#include <asm/iSeries/HvCallEvent.h> -#include <asm/iSeries/HvCallXm.h> -#include <asm/iSeries/ItLpQueue.h> -#include <asm/iSeries/mf.h> -#include <asm/iSeries/HvLpEvent.h> -#include <asm/iSeries/LparMap.h> - +#include <asm/iseries/hv_lp_config.h> +#include <asm/iseries/hv_call_event.h> +#include <asm/iseries/hv_call_xm.h> +#include <asm/iseries/it_lp_queue.h> +#include <asm/iseries/mf.h> +#include <asm/iseries/hv_lp_event.h> +#include <asm/iseries/lpar_map.h> + +#include "naca.h" #include "setup.h" #include "irq.h" #include "vpd_areas.h" @@ -94,6 +95,8 @@ extern unsigned long iSeries_recal_titan; static int mf_initialized; +static unsigned long cmd_mem_limit; + struct MemoryBlock { unsigned long absStart; unsigned long absEnd; @@ -341,23 +344,6 @@ static void __init iSeries_init_early(void) */ iommu_init_early_iSeries(); - iSeries_get_cmdline(); - - /* Save unparsed command line copy for /proc/cmdline */ - strlcpy(saved_command_line, cmd_line, COMMAND_LINE_SIZE); - - /* Parse early parameters, in particular mem=x */ - parse_early_param(); - - if (memory_limit) { - if (memory_limit < systemcfg->physicalMemorySize) - systemcfg->physicalMemorySize = memory_limit; - else { - printk("Ignoring mem=%lu >= ram_top.\n", memory_limit); - memory_limit = 0; - } - } - /* Initialize machine-dependency vectors */ #ifdef CONFIG_SMP smp_init_iSeries(); @@ -971,6 +957,8 @@ void build_flat_dt(struct iseries_flat_dt *dt) /* /chosen */ dt_start_node(dt, "chosen"); dt_prop_u32(dt, "linux,platform", PLATFORM_ISERIES_LPAR); + if (cmd_mem_limit) + dt_prop_u64(dt, "linux,memory-limit", cmd_mem_limit); dt_end_node(dt); dt_cpus(dt); @@ -990,7 +978,27 @@ void * __init iSeries_early_setup(void) */ build_iSeries_Memory_Map(); + iSeries_get_cmdline(); + + /* Save unparsed command line copy for /proc/cmdline */ + strlcpy(saved_command_line, cmd_line, COMMAND_LINE_SIZE); + + /* Parse early parameters, in particular mem=x */ + parse_early_param(); + build_flat_dt(&iseries_dt); return (void *) __pa(&iseries_dt); } + +/* + * On iSeries we just parse the mem=X option from the command line. + * On pSeries it's a bit more complicated, see prom_init_mem() + */ +static int __init early_parsemem(char *p) +{ + if (p) + cmd_mem_limit = ALIGN(memparse(p, &p), PAGE_SIZE); + return 0; +} +early_param("mem", early_parsemem); diff --git a/arch/powerpc/platforms/iseries/smp.c b/arch/powerpc/platforms/iseries/smp.c index f720916682f..3336bad6772 100644 --- a/arch/powerpc/platforms/iseries/smp.c +++ b/arch/powerpc/platforms/iseries/smp.c @@ -38,7 +38,7 @@ #include <asm/io.h> #include <asm/smp.h> #include <asm/paca.h> -#include <asm/iSeries/HvCall.h> +#include <asm/iseries/hv_call.h> #include <asm/time.h> #include <asm/ppcdebug.h> #include <asm/machdep.h> diff --git a/arch/powerpc/platforms/iseries/vio.c b/arch/powerpc/platforms/iseries/vio.c index c0f7d2e9153..c27a66876c2 100644 --- a/arch/powerpc/platforms/iseries/vio.c +++ b/arch/powerpc/platforms/iseries/vio.c @@ -17,10 +17,10 @@ #include <asm/tce.h> #include <asm/abs_addr.h> #include <asm/page.h> -#include <asm/iSeries/vio.h> -#include <asm/iSeries/HvTypes.h> -#include <asm/iSeries/HvLpConfig.h> -#include <asm/iSeries/HvCallXm.h> +#include <asm/iseries/vio.h> +#include <asm/iseries/hv_types.h> +#include <asm/iseries/hv_lp_config.h> +#include <asm/iseries/hv_call_xm.h> struct device *iSeries_vio_dev = &vio_bus_device.dev; EXPORT_SYMBOL(iSeries_vio_dev); diff --git a/arch/powerpc/platforms/iseries/viopath.c b/arch/powerpc/platforms/iseries/viopath.c index c0c767bd37f..fe97bfbf746 100644 --- a/arch/powerpc/platforms/iseries/viopath.c +++ b/arch/powerpc/platforms/iseries/viopath.c @@ -41,12 +41,12 @@ #include <asm/system.h> #include <asm/uaccess.h> -#include <asm/iSeries/HvTypes.h> -#include <asm/iSeries/ItExtVpdPanel.h> -#include <asm/iSeries/HvLpEvent.h> -#include <asm/iSeries/HvLpConfig.h> -#include <asm/iSeries/mf.h> -#include <asm/iSeries/vio.h> +#include <asm/iseries/hv_types.h> +#include <asm/iseries/it_exp_vpd_panel.h> +#include <asm/iseries/hv_lp_event.h> +#include <asm/iseries/hv_lp_config.h> +#include <asm/iseries/mf.h> +#include <asm/iseries/vio.h> /* Status of the path to each other partition in the system. * This is overkill, since we will only ever establish connections diff --git a/arch/powerpc/platforms/iseries/vpdinfo.c b/arch/powerpc/platforms/iseries/vpdinfo.c index 9c318849dee..23a6d1e5b42 100644 --- a/arch/powerpc/platforms/iseries/vpdinfo.c +++ b/arch/powerpc/platforms/iseries/vpdinfo.c @@ -32,7 +32,7 @@ #include <asm/resource.h> #include <asm/abs_addr.h> #include <asm/pci-bridge.h> -#include <asm/iSeries/HvTypes.h> +#include <asm/iseries/hv_types.h> #include "pci.h" #include "call_pci.h" diff --git a/arch/powerpc/platforms/powermac/pic.c b/arch/powerpc/platforms/powermac/pic.c index 0037a8c8c81..83a49e80ac2 100644 --- a/arch/powerpc/platforms/powermac/pic.c +++ b/arch/powerpc/platforms/powermac/pic.c @@ -576,7 +576,7 @@ void __init pmac_pic_init(void) #endif /* CONFIG_PPC32 */ } -#ifdef CONFIG_PM +#if defined(CONFIG_PM) && defined(CONFIG_PPC32) /* * These procedures are used in implementing sleep on the powerbooks. * sleep_save_intrs() saves the states of all interrupt enables @@ -643,7 +643,7 @@ static int pmacpic_resume(struct sys_device *sysdev) return 0; } -#endif /* CONFIG_PM */ +#endif /* CONFIG_PM && CONFIG_PPC32 */ static struct sysdev_class pmacpic_sysclass = { set_kset_name("pmac_pic"), @@ -655,10 +655,10 @@ static struct sys_device device_pmacpic = { }; static struct sysdev_driver driver_pmacpic = { -#ifdef CONFIG_PM +#if defined(CONFIG_PM) && defined(CONFIG_PPC32) .suspend = &pmacpic_suspend, .resume = &pmacpic_resume, -#endif /* CONFIG_PM */ +#endif /* CONFIG_PM && CONFIG_PPC32 */ }; static int __init init_pmacpic_sysfs(void) diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c index 6f62af59729..80b58c1ec41 100644 --- a/arch/powerpc/platforms/powermac/setup.c +++ b/arch/powerpc/platforms/powermac/setup.c @@ -75,6 +75,7 @@ #include <asm/smu.h> #include <asm/pmc.h> #include <asm/mpic.h> +#include <asm/lmb.h> #include "pmac.h" @@ -350,7 +351,7 @@ void __init pmac_setup_arch(void) find_via_pmu(); smu_init(); -#ifdef CONFIG_NVRAM +#if defined(CONFIG_NVRAM) || defined(CONFIG_PPC64) pmac_nvram_init(); #endif diff --git a/arch/powerpc/platforms/pseries/Kconfig b/arch/powerpc/platforms/pseries/Kconfig index 2d57f588151..e3fc3407bb1 100644 --- a/arch/powerpc/platforms/pseries/Kconfig +++ b/arch/powerpc/platforms/pseries/Kconfig @@ -21,15 +21,6 @@ config EEH depends on PPC_PSERIES default y if !EMBEDDED -config RTAS_PROC - bool "Proc interface to RTAS" - depends on PPC_RTAS - default y - -config RTAS_FLASH - tristate "Firmware flash interface" - depends on PPC64 && RTAS_PROC - config SCANLOG tristate "Scanlog dump interface" depends on RTAS_PROC && PPC_PSERIES diff --git a/arch/powerpc/platforms/pseries/Makefile b/arch/powerpc/platforms/pseries/Makefile index 5ef494e3a70..b9938fece78 100644 --- a/arch/powerpc/platforms/pseries/Makefile +++ b/arch/powerpc/platforms/pseries/Makefile @@ -1,5 +1,5 @@ obj-y := pci.o lpar.o hvCall.o nvram.o reconfig.o \ - setup.o iommu.o rtas-fw.o ras.o + setup.o iommu.o ras.o rtasd.o obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_IBMVIO) += vio.o obj-$(CONFIG_XICS) += xics.o diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c index 9e90d41131d..513e2723149 100644 --- a/arch/powerpc/platforms/pseries/iommu.c +++ b/arch/powerpc/platforms/pseries/iommu.c @@ -42,13 +42,14 @@ #include <asm/pci-bridge.h> #include <asm/machdep.h> #include <asm/abs_addr.h> -#include <asm/plpar_wrappers.h> #include <asm/pSeries_reconfig.h> #include <asm/systemcfg.h> #include <asm/firmware.h> #include <asm/tce.h> #include <asm/ppc-pci.h> +#include "plpar_wrappers.h" + #define DBG(fmt...) extern int is_python(struct device_node *); @@ -498,7 +499,7 @@ static int iommu_reconfig_notifier(struct notifier_block *nb, unsigned long acti switch (action) { case PSERIES_RECONFIG_REMOVE: - if (pci->iommu_table && + if (pci && pci->iommu_table && get_property(np, "ibm,dma-window", NULL)) iommu_free_table(np); break; diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c index 268d8362dde..e384a5a9179 100644 --- a/arch/powerpc/platforms/pseries/lpar.c +++ b/arch/powerpc/platforms/pseries/lpar.c @@ -38,7 +38,8 @@ #include <asm/prom.h> #include <asm/abs_addr.h> #include <asm/cputable.h> -#include <asm/plpar_wrappers.h> + +#include "plpar_wrappers.h" #ifdef DEBUG #define DBG(fmt...) udbg_printf(fmt) @@ -260,22 +261,18 @@ out: void vpa_init(int cpu) { int hwcpu = get_hard_smp_processor_id(cpu); - unsigned long vpa = (unsigned long)&(paca[cpu].lppaca); + unsigned long vpa = __pa(&paca[cpu].lppaca); long ret; - unsigned long flags; - - /* Register the Virtual Processor Area (VPA) */ - flags = 1UL << (63 - 18); if (cpu_has_feature(CPU_FTR_ALTIVEC)) paca[cpu].lppaca.vmxregs_in_use = 1; - ret = register_vpa(flags, hwcpu, __pa(vpa)); + ret = register_vpa(hwcpu, vpa); if (ret) printk(KERN_ERR "WARNING: vpa_init: VPA registration for " "cpu %d (hw %d) of area %lx returns %ld\n", - cpu, hwcpu, __pa(vpa), ret); + cpu, hwcpu, vpa, ret); } long pSeries_lpar_hpte_insert(unsigned long hpte_group, diff --git a/arch/powerpc/platforms/pseries/plpar_wrappers.h b/arch/powerpc/platforms/pseries/plpar_wrappers.h new file mode 100644 index 00000000000..382f8c5b0e7 --- /dev/null +++ b/arch/powerpc/platforms/pseries/plpar_wrappers.h @@ -0,0 +1,120 @@ +#ifndef _PSERIES_PLPAR_WRAPPERS_H +#define _PSERIES_PLPAR_WRAPPERS_H + +#include <asm/hvcall.h> + +static inline long poll_pending(void) +{ + unsigned long dummy; + return plpar_hcall(H_POLL_PENDING, 0, 0, 0, 0, &dummy, &dummy, &dummy); +} + +static inline long prod_processor(void) +{ + plpar_hcall_norets(H_PROD); + return 0; +} + +static inline long cede_processor(void) +{ + plpar_hcall_norets(H_CEDE); + return 0; +} + +static inline long vpa_call(unsigned long flags, unsigned long cpu, + unsigned long vpa) +{ + /* flags are in bits 16-18 (counting from most significant bit) */ + flags = flags << (63 - 18); + + return plpar_hcall_norets(H_REGISTER_VPA, flags, cpu, vpa); +} + +static inline long unregister_vpa(unsigned long cpu, unsigned long vpa) +{ + return vpa_call(0x5, cpu, vpa); +} + +static inline long register_vpa(unsigned long cpu, unsigned long vpa) +{ + return vpa_call(0x1, cpu, vpa); +} + +extern void vpa_init(int cpu); + +static inline long plpar_pte_remove(unsigned long flags, unsigned long ptex, + unsigned long avpn, unsigned long *old_pteh_ret, + unsigned long *old_ptel_ret) +{ + unsigned long dummy; + return plpar_hcall(H_REMOVE, flags, ptex, avpn, 0, old_pteh_ret, + old_ptel_ret, &dummy); +} + +static inline long plpar_pte_read(unsigned long flags, unsigned long ptex, + unsigned long *old_pteh_ret, unsigned long *old_ptel_ret) +{ + unsigned long dummy; + return plpar_hcall(H_READ, flags, ptex, 0, 0, old_pteh_ret, + old_ptel_ret, &dummy); +} + +static inline long plpar_pte_protect(unsigned long flags, unsigned long ptex, + unsigned long avpn) +{ + return plpar_hcall_norets(H_PROTECT, flags, ptex, avpn); +} + +static inline long plpar_tce_get(unsigned long liobn, unsigned long ioba, + unsigned long *tce_ret) +{ + unsigned long dummy; + return plpar_hcall(H_GET_TCE, liobn, ioba, 0, 0, tce_ret, &dummy, + &dummy); +} + +static inline long plpar_tce_put(unsigned long liobn, unsigned long ioba, + unsigned long tceval) +{ + return plpar_hcall_norets(H_PUT_TCE, liobn, ioba, tceval); +} + +static inline long plpar_tce_put_indirect(unsigned long liobn, + unsigned long ioba, unsigned long page, unsigned long count) +{ + return plpar_hcall_norets(H_PUT_TCE_INDIRECT, liobn, ioba, page, count); +} + +static inline long plpar_tce_stuff(unsigned long liobn, unsigned long ioba, + unsigned long tceval, unsigned long count) +{ + return plpar_hcall_norets(H_STUFF_TCE, liobn, ioba, tceval, count); +} + +static inline long plpar_get_term_char(unsigned long termno, + unsigned long *len_ret, char *buf_ret) +{ + unsigned long *lbuf = (unsigned long *)buf_ret; /* TODO: alignment? */ + return plpar_hcall(H_GET_TERM_CHAR, termno, 0, 0, 0, len_ret, + lbuf + 0, lbuf + 1); +} + +static inline long plpar_put_term_char(unsigned long termno, unsigned long len, + const char *buffer) +{ + unsigned long *lbuf = (unsigned long *)buffer; /* TODO: alignment? */ + return plpar_hcall_norets(H_PUT_TERM_CHAR, termno, len, lbuf[0], + lbuf[1]); +} + +static inline long plpar_set_xdabr(unsigned long address, unsigned long flags) +{ + return plpar_hcall_norets(H_SET_XDABR, address, flags); +} + +static inline long plpar_set_dabr(unsigned long val) +{ + return plpar_hcall_norets(H_SET_DABR, val); +} + +#endif /* _PSERIES_PLPAR_WRAPPERS_H */ diff --git a/arch/powerpc/platforms/pseries/rtas-fw.c b/arch/powerpc/platforms/pseries/rtas-fw.c deleted file mode 100644 index 15d81d758ca..00000000000 --- a/arch/powerpc/platforms/pseries/rtas-fw.c +++ /dev/null @@ -1,138 +0,0 @@ -/* - * - * Procedures for firmware flash updates on pSeries systems. - * - * Peter Bergner, IBM March 2001. - * Copyright (C) 2001 IBM. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <stdarg.h> -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/spinlock.h> -#include <linux/module.h> -#include <linux/init.h> - -#include <asm/prom.h> -#include <asm/rtas.h> -#include <asm/semaphore.h> -#include <asm/machdep.h> -#include <asm/page.h> -#include <asm/param.h> -#include <asm/system.h> -#include <asm/abs_addr.h> -#include <asm/udbg.h> -#include <asm/delay.h> -#include <asm/uaccess.h> -#include <asm/systemcfg.h> - -#include "rtas-fw.h" - -struct flash_block_list_header rtas_firmware_flash_list = {0, NULL}; - -#define FLASH_BLOCK_LIST_VERSION (1UL) - -static void rtas_flash_firmware(void) -{ - unsigned long image_size; - struct flash_block_list *f, *next, *flist; - unsigned long rtas_block_list; - int i, status, update_token; - - update_token = rtas_token("ibm,update-flash-64-and-reboot"); - if (update_token == RTAS_UNKNOWN_SERVICE) { - printk(KERN_ALERT "FLASH: ibm,update-flash-64-and-reboot is not available -- not a service partition?\n"); - printk(KERN_ALERT "FLASH: firmware will not be flashed\n"); - return; - } - - /* NOTE: the "first" block list is a global var with no data - * blocks in the kernel data segment. We do this because - * we want to ensure this block_list addr is under 4GB. - */ - rtas_firmware_flash_list.num_blocks = 0; - flist = (struct flash_block_list *)&rtas_firmware_flash_list; - rtas_block_list = virt_to_abs(flist); - if (rtas_block_list >= 4UL*1024*1024*1024) { - printk(KERN_ALERT "FLASH: kernel bug...flash list header addr above 4GB\n"); - return; - } - - printk(KERN_ALERT "FLASH: preparing saved firmware image for flash\n"); - /* Update the block_list in place. */ - image_size = 0; - for (f = flist; f; f = next) { - /* Translate data addrs to absolute */ - for (i = 0; i < f->num_blocks; i++) { - f->blocks[i].data = (char *)virt_to_abs(f->blocks[i].data); - image_size += f->blocks[i].length; - } - next = f->next; - /* Don't translate NULL pointer for last entry */ - if (f->next) - f->next = (struct flash_block_list *)virt_to_abs(f->next); - else - f->next = NULL; - /* make num_blocks into the version/length field */ - f->num_blocks = (FLASH_BLOCK_LIST_VERSION << 56) | ((f->num_blocks+1)*16); - } - - printk(KERN_ALERT "FLASH: flash image is %ld bytes\n", image_size); - printk(KERN_ALERT "FLASH: performing flash and reboot\n"); - rtas_progress("Flashing \n", 0x0); - rtas_progress("Please Wait... ", 0x0); - printk(KERN_ALERT "FLASH: this will take several minutes. Do not power off!\n"); - status = rtas_call(update_token, 1, 1, NULL, rtas_block_list); - switch (status) { /* should only get "bad" status */ - case 0: - printk(KERN_ALERT "FLASH: success\n"); - break; - case -1: - printk(KERN_ALERT "FLASH: hardware error. Firmware may not be not flashed\n"); - break; - case -3: - printk(KERN_ALERT "FLASH: image is corrupt or not correct for this platform. Firmware not flashed\n"); - break; - case -4: - printk(KERN_ALERT "FLASH: flash failed when partially complete. System may not reboot\n"); - break; - default: - printk(KERN_ALERT "FLASH: unknown flash return code %d\n", status); - break; - } -} - -void rtas_flash_bypass_warning(void) -{ - printk(KERN_ALERT "FLASH: firmware flash requires a reboot\n"); - printk(KERN_ALERT "FLASH: the firmware image will NOT be flashed\n"); -} - - -void rtas_fw_restart(char *cmd) -{ - if (rtas_firmware_flash_list.next) - rtas_flash_firmware(); - rtas_restart(cmd); -} - -void rtas_fw_power_off(void) -{ - if (rtas_firmware_flash_list.next) - rtas_flash_bypass_warning(); - rtas_power_off(); -} - -void rtas_fw_halt(void) -{ - if (rtas_firmware_flash_list.next) - rtas_flash_bypass_warning(); - rtas_halt(); -} - -EXPORT_SYMBOL(rtas_firmware_flash_list); diff --git a/arch/powerpc/platforms/pseries/rtas-fw.h b/arch/powerpc/platforms/pseries/rtas-fw.h deleted file mode 100644 index e70fa69974a..00000000000 --- a/arch/powerpc/platforms/pseries/rtas-fw.h +++ /dev/null @@ -1,3 +0,0 @@ -void rtas_fw_restart(char *cmd); -void rtas_fw_power_off(void); -void rtas_fw_halt(void); diff --git a/arch/powerpc/platforms/pseries/rtasd.c b/arch/powerpc/platforms/pseries/rtasd.c new file mode 100644 index 00000000000..e26b0420b6d --- /dev/null +++ b/arch/powerpc/platforms/pseries/rtasd.c @@ -0,0 +1,527 @@ +/* + * Copyright (C) 2001 Anton Blanchard <anton@au.ibm.com>, IBM + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * Communication to userspace based on kernel/printk.c + */ + +#include <linux/types.h> +#include <linux/errno.h> +#include <linux/sched.h> +#include <linux/kernel.h> +#include <linux/poll.h> +#include <linux/proc_fs.h> +#include <linux/init.h> +#include <linux/vmalloc.h> +#include <linux/spinlock.h> +#include <linux/cpu.h> +#include <linux/delay.h> + +#include <asm/uaccess.h> +#include <asm/io.h> +#include <asm/rtas.h> +#include <asm/prom.h> +#include <asm/nvram.h> +#include <asm/atomic.h> +#include <asm/systemcfg.h> + +#if 0 +#define DEBUG(A...) printk(KERN_ERR A) +#else +#define DEBUG(A...) +#endif + +static DEFINE_SPINLOCK(rtasd_log_lock); + +DECLARE_WAIT_QUEUE_HEAD(rtas_log_wait); + +static char *rtas_log_buf; +static unsigned long rtas_log_start; +static unsigned long rtas_log_size; + +static int surveillance_timeout = -1; +static unsigned int rtas_event_scan_rate; +static unsigned int rtas_error_log_max; +static unsigned int rtas_error_log_buffer_max; + +static int full_rtas_msgs = 0; + +extern int no_logging; + +volatile int error_log_cnt = 0; + +/* + * Since we use 32 bit RTAS, the physical address of this must be below + * 4G or else bad things happen. Allocate this in the kernel data and + * make it big enough. + */ +static unsigned char logdata[RTAS_ERROR_LOG_MAX]; + +static int get_eventscan_parms(void); + +static char *rtas_type[] = { + "Unknown", "Retry", "TCE Error", "Internal Device Failure", + "Timeout", "Data Parity", "Address Parity", "Cache Parity", + "Address Invalid", "ECC Uncorrected", "ECC Corrupted", +}; + +static char *rtas_event_type(int type) +{ + if ((type > 0) && (type < 11)) + return rtas_type[type]; + + switch (type) { + case RTAS_TYPE_EPOW: + return "EPOW"; + case RTAS_TYPE_PLATFORM: + return "Platform Error"; + case RTAS_TYPE_IO: + return "I/O Event"; + case RTAS_TYPE_INFO: + return "Platform Information Event"; + case RTAS_TYPE_DEALLOC: + return "Resource Deallocation Event"; + case RTAS_TYPE_DUMP: + return "Dump Notification Event"; + } + + return rtas_type[0]; +} + +/* To see this info, grep RTAS /var/log/messages and each entry + * will be collected together with obvious begin/end. + * There will be a unique identifier on the begin and end lines. + * This will persist across reboots. + * + * format of error logs returned from RTAS: + * bytes (size) : contents + * -------------------------------------------------------- + * 0-7 (8) : rtas_error_log + * 8-47 (40) : extended info + * 48-51 (4) : vendor id + * 52-1023 (vendor specific) : location code and debug data + */ +static void printk_log_rtas(char *buf, int len) +{ + + int i,j,n = 0; + int perline = 16; + char buffer[64]; + char * str = "RTAS event"; + + if (full_rtas_msgs) { + printk(RTAS_DEBUG "%d -------- %s begin --------\n", + error_log_cnt, str); + + /* + * Print perline bytes on each line, each line will start + * with RTAS and a changing number, so syslogd will + * print lines that are otherwise the same. Separate every + * 4 bytes with a space. + */ + for (i = 0; i < len; i++) { + j = i % perline; + if (j == 0) { + memset(buffer, 0, sizeof(buffer)); + n = sprintf(buffer, "RTAS %d:", i/perline); + } + + if ((i % 4) == 0) + n += sprintf(buffer+n, " "); + + n += sprintf(buffer+n, "%02x", (unsigned char)buf[i]); + + if (j == (perline-1)) + printk(KERN_DEBUG "%s\n", buffer); + } + if ((i % perline) != 0) + printk(KERN_DEBUG "%s\n", buffer); + + printk(RTAS_DEBUG "%d -------- %s end ----------\n", + error_log_cnt, str); + } else { + struct rtas_error_log *errlog = (struct rtas_error_log *)buf; + + printk(RTAS_DEBUG "event: %d, Type: %s, Severity: %d\n", + error_log_cnt, rtas_event_type(errlog->type), + errlog->severity); + } +} + +static int log_rtas_len(char * buf) +{ + int len; + struct rtas_error_log *err; + + /* rtas fixed header */ + len = 8; + err = (struct rtas_error_log *)buf; + if (err->extended_log_length) { + + /* extended header */ + len += err->extended_log_length; + } + + if (rtas_error_log_max == 0) { + get_eventscan_parms(); + } + if (len > rtas_error_log_max) + len = rtas_error_log_max; + + return len; +} + +/* + * First write to nvram, if fatal error, that is the only + * place we log the info. The error will be picked up + * on the next reboot by rtasd. If not fatal, run the + * method for the type of error. Currently, only RTAS + * errors have methods implemented, but in the future + * there might be a need to store data in nvram before a + * call to panic(). + * + * XXX We write to nvram periodically, to indicate error has + * been written and sync'd, but there is a possibility + * that if we don't shutdown correctly, a duplicate error + * record will be created on next reboot. + */ +void pSeries_log_error(char *buf, unsigned int err_type, int fatal) +{ + unsigned long offset; + unsigned long s; + int len = 0; + + DEBUG("logging event\n"); + if (buf == NULL) + return; + + spin_lock_irqsave(&rtasd_log_lock, s); + + /* get length and increase count */ + switch (err_type & ERR_TYPE_MASK) { + case ERR_TYPE_RTAS_LOG: + len = log_rtas_len(buf); + if (!(err_type & ERR_FLAG_BOOT)) + error_log_cnt++; + break; + case ERR_TYPE_KERNEL_PANIC: + default: + spin_unlock_irqrestore(&rtasd_log_lock, s); + return; + } + + /* Write error to NVRAM */ + if (!no_logging && !(err_type & ERR_FLAG_BOOT)) + nvram_write_error_log(buf, len, err_type); + + /* + * rtas errors can occur during boot, and we do want to capture + * those somewhere, even if nvram isn't ready (why not?), and even + * if rtasd isn't ready. Put them into the boot log, at least. + */ + if ((err_type & ERR_TYPE_MASK) == ERR_TYPE_RTAS_LOG) + printk_log_rtas(buf, len); + + /* Check to see if we need to or have stopped logging */ + if (fatal || no_logging) { + no_logging = 1; + spin_unlock_irqrestore(&rtasd_log_lock, s); + return; + } + + /* call type specific method for error */ + switch (err_type & ERR_TYPE_MASK) { + case ERR_TYPE_RTAS_LOG: + offset = rtas_error_log_buffer_max * + ((rtas_log_start+rtas_log_size) & LOG_NUMBER_MASK); + + /* First copy over sequence number */ + memcpy(&rtas_log_buf[offset], (void *) &error_log_cnt, sizeof(int)); + + /* Second copy over error log data */ + offset += sizeof(int); + memcpy(&rtas_log_buf[offset], buf, len); + + if (rtas_log_size < LOG_NUMBER) + rtas_log_size += 1; + else + rtas_log_start += 1; + + spin_unlock_irqrestore(&rtasd_log_lock, s); + wake_up_interruptible(&rtas_log_wait); + break; + case ERR_TYPE_KERNEL_PANIC: + default: + spin_unlock_irqrestore(&rtasd_log_lock, s); + return; + } + +} + + +static int rtas_log_open(struct inode * inode, struct file * file) +{ + return 0; +} + +static int rtas_log_release(struct inode * inode, struct file * file) +{ + return 0; +} + +/* This will check if all events are logged, if they are then, we + * know that we can safely clear the events in NVRAM. + * Next we'll sit and wait for something else to log. + */ +static ssize_t rtas_log_read(struct file * file, char __user * buf, + size_t count, loff_t *ppos) +{ + int error; + char *tmp; + unsigned long s; + unsigned long offset; + + if (!buf || count < rtas_error_log_buffer_max) + return -EINVAL; + + count = rtas_error_log_buffer_max; + + if (!access_ok(VERIFY_WRITE, buf, count)) + return -EFAULT; + + tmp = kmalloc(count, GFP_KERNEL); + if (!tmp) + return -ENOMEM; + + + spin_lock_irqsave(&rtasd_log_lock, s); + /* if it's 0, then we know we got the last one (the one in NVRAM) */ + if (rtas_log_size == 0 && !no_logging) + nvram_clear_error_log(); + spin_unlock_irqrestore(&rtasd_log_lock, s); + + + error = wait_event_interruptible(rtas_log_wait, rtas_log_size); + if (error) + goto out; + + spin_lock_irqsave(&rtasd_log_lock, s); + offset = rtas_error_log_buffer_max * (rtas_log_start & LOG_NUMBER_MASK); + memcpy(tmp, &rtas_log_buf[offset], count); + + rtas_log_start += 1; + rtas_log_size -= 1; + spin_unlock_irqrestore(&rtasd_log_lock, s); + + error = copy_to_user(buf, tmp, count) ? -EFAULT : count; +out: + kfree(tmp); + return error; +} + +static unsigned int rtas_log_poll(struct file *file, poll_table * wait) +{ + poll_wait(file, &rtas_log_wait, wait); + if (rtas_log_size) + return POLLIN | POLLRDNORM; + return 0; +} + +struct file_operations proc_rtas_log_operations = { + .read = rtas_log_read, + .poll = rtas_log_poll, + .open = rtas_log_open, + .release = rtas_log_release, +}; + +static int enable_surveillance(int timeout) +{ + int error; + + error = rtas_set_indicator(SURVEILLANCE_TOKEN, 0, timeout); + + if (error == 0) + return 0; + + if (error == -EINVAL) { + printk(KERN_INFO "rtasd: surveillance not supported\n"); + return 0; + } + + printk(KERN_ERR "rtasd: could not update surveillance\n"); + return -1; +} + +static int get_eventscan_parms(void) +{ + struct device_node *node; + int *ip; + + node = of_find_node_by_path("/rtas"); + + ip = (int *)get_property(node, "rtas-event-scan-rate", NULL); + if (ip == NULL) { + printk(KERN_ERR "rtasd: no rtas-event-scan-rate\n"); + of_node_put(node); + return -1; + } + rtas_event_scan_rate = *ip; + DEBUG("rtas-event-scan-rate %d\n", rtas_event_scan_rate); + + /* Make room for the sequence number */ + rtas_error_log_max = rtas_get_error_log_max(); + rtas_error_log_buffer_max = rtas_error_log_max + sizeof(int); + + of_node_put(node); + + return 0; +} + +static void do_event_scan(int event_scan) +{ + int error; + do { + memset(logdata, 0, rtas_error_log_max); + error = rtas_call(event_scan, 4, 1, NULL, + RTAS_EVENT_SCAN_ALL_EVENTS, 0, + __pa(logdata), rtas_error_log_max); + if (error == -1) { + printk(KERN_ERR "event-scan failed\n"); + break; + } + + if (error == 0) + pSeries_log_error(logdata, ERR_TYPE_RTAS_LOG, 0); + + } while(error == 0); +} + +static void do_event_scan_all_cpus(long delay) +{ + int cpu; + + lock_cpu_hotplug(); + cpu = first_cpu(cpu_online_map); + for (;;) { + set_cpus_allowed(current, cpumask_of_cpu(cpu)); + do_event_scan(rtas_token("event-scan")); + set_cpus_allowed(current, CPU_MASK_ALL); + + /* Drop hotplug lock, and sleep for the specified delay */ + unlock_cpu_hotplug(); + msleep_interruptible(delay); + lock_cpu_hotplug(); + + cpu = next_cpu(cpu, cpu_online_map); + if (cpu == NR_CPUS) + break; + } + unlock_cpu_hotplug(); +} + +static int rtasd(void *unused) +{ + unsigned int err_type; + int event_scan = rtas_token("event-scan"); + int rc; + + daemonize("rtasd"); + + if (event_scan == RTAS_UNKNOWN_SERVICE || get_eventscan_parms() == -1) + goto error; + + rtas_log_buf = vmalloc(rtas_error_log_buffer_max*LOG_NUMBER); + if (!rtas_log_buf) { + printk(KERN_ERR "rtasd: no memory\n"); + goto error; + } + + printk(KERN_INFO "RTAS daemon started\n"); + + DEBUG("will sleep for %d milliseconds\n", (30000/rtas_event_scan_rate)); + + /* See if we have any error stored in NVRAM */ + memset(logdata, 0, rtas_error_log_max); + + rc = nvram_read_error_log(logdata, rtas_error_log_max, &err_type); + + /* We can use rtas_log_buf now */ + no_logging = 0; + + if (!rc) { + if (err_type != ERR_FLAG_ALREADY_LOGGED) { + pSeries_log_error(logdata, err_type | ERR_FLAG_BOOT, 0); + } + } + + /* First pass. */ + do_event_scan_all_cpus(1000); + + if (surveillance_timeout != -1) { + DEBUG("enabling surveillance\n"); + enable_surveillance(surveillance_timeout); + DEBUG("surveillance enabled\n"); + } + + /* Delay should be at least one second since some + * machines have problems if we call event-scan too + * quickly. */ + for (;;) + do_event_scan_all_cpus(30000/rtas_event_scan_rate); + +error: + /* Should delete proc entries */ + return -EINVAL; +} + +static int __init rtas_init(void) +{ + struct proc_dir_entry *entry; + + /* No RTAS, only warn if we are on a pSeries box */ + if (rtas_token("event-scan") == RTAS_UNKNOWN_SERVICE) { + if (systemcfg->platform & PLATFORM_PSERIES) + printk(KERN_INFO "rtasd: no event-scan on system\n"); + return 1; + } + + entry = create_proc_entry("ppc64/rtas/error_log", S_IRUSR, NULL); + if (entry) + entry->proc_fops = &proc_rtas_log_operations; + else + printk(KERN_ERR "Failed to create error_log proc entry\n"); + + if (kernel_thread(rtasd, NULL, CLONE_FS) < 0) + printk(KERN_ERR "Failed to start RTAS daemon\n"); + + return 0; +} + +static int __init surveillance_setup(char *str) +{ + int i; + + if (get_option(&str,&i)) { + if (i >= 0 && i <= 255) + surveillance_timeout = i; + } + + return 1; +} + +static int __init rtasmsgs_setup(char *str) +{ + if (strcmp(str, "on") == 0) + full_rtas_msgs = 1; + else if (strcmp(str, "off") == 0) + full_rtas_msgs = 0; + + return 1; +} +__initcall(rtas_init); +__setup("surveillance=", surveillance_setup); +__setup("rtasmsgs=", rtasmsgs_setup); diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c index 10cb0f2d9b5..65bee939eec 100644 --- a/arch/powerpc/platforms/pseries/setup.c +++ b/arch/powerpc/platforms/pseries/setup.c @@ -58,7 +58,6 @@ #include <asm/irq.h> #include <asm/time.h> #include <asm/nvram.h> -#include <asm/plpar_wrappers.h> #include "xics.h" #include <asm/firmware.h> #include <asm/pmc.h> @@ -67,7 +66,7 @@ #include <asm/i8259.h> #include <asm/udbg.h> -#include "rtas-fw.h" +#include "plpar_wrappers.h" #ifdef DEBUG #define DBG(fmt...) udbg_printf(fmt) @@ -352,6 +351,16 @@ static void pSeries_mach_cpu_die(void) for(;;); } +static int pseries_set_dabr(unsigned long dabr) +{ + if (firmware_has_feature(FW_FEATURE_XDABR)) { + /* We want to catch accesses from kernel and userspace */ + return plpar_set_xdabr(dabr, H_DABRX_KERNEL | H_DABRX_USER); + } + + return plpar_set_dabr(dabr); +} + /* * Early initialization. Relocation is on but do not reference unbolted pages @@ -387,6 +396,8 @@ static void __init pSeries_init_early(void) DBG("Hello World !\n"); } + if (firmware_has_feature(FW_FEATURE_XDABR | FW_FEATURE_DABR)) + ppc_md.set_dabr = pseries_set_dabr; iommu_init_early_pSeries(); @@ -591,9 +602,9 @@ struct machdep_calls __initdata pSeries_md = { .pcibios_fixup = pSeries_final_fixup, .pci_probe_mode = pSeries_pci_probe_mode, .irq_bus_setup = pSeries_irq_bus_setup, - .restart = rtas_fw_restart, - .power_off = rtas_fw_power_off, - .halt = rtas_fw_halt, + .restart = rtas_restart, + .power_off = rtas_power_off, + .halt = rtas_halt, .panic = rtas_os_term, .cpu_die = pSeries_mach_cpu_die, .get_boot_time = rtas_get_boot_time, diff --git a/arch/powerpc/platforms/pseries/smp.c b/arch/powerpc/platforms/pseries/smp.c index 9c9458ddfc2..7a243e8ccd7 100644 --- a/arch/powerpc/platforms/pseries/smp.c +++ b/arch/powerpc/platforms/pseries/smp.c @@ -44,10 +44,11 @@ #include <asm/firmware.h> #include <asm/system.h> #include <asm/rtas.h> -#include <asm/plpar_wrappers.h> #include <asm/pSeries_reconfig.h> #include <asm/mpic.h> +#include "plpar_wrappers.h" + #ifdef DEBUG #define DBG(fmt...) udbg_printf(fmt) #else diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile index 8acd21dee05..6b7efcfc352 100644 --- a/arch/powerpc/sysdev/Makefile +++ b/arch/powerpc/sysdev/Makefile @@ -5,3 +5,4 @@ obj-$(CONFIG_PPC_MPC106) += grackle.o obj-$(CONFIG_BOOKE) += dcr.o obj-$(CONFIG_40x) += dcr.o obj-$(CONFIG_U3_DART) += u3_iommu.o +obj-$(CONFIG_MMIO_NVRAM) += mmio_nvram.o diff --git a/arch/powerpc/sysdev/dart.h b/arch/powerpc/sysdev/dart.h new file mode 100644 index 00000000000..ea8f0d9eed8 --- /dev/null +++ b/arch/powerpc/sysdev/dart.h @@ -0,0 +1,59 @@ +/* + * Copyright (C) 2004 Olof Johansson <olof@austin.ibm.com>, IBM Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef _POWERPC_SYSDEV_DART_H +#define _POWERPC_SYSDEV_DART_H + + +/* physical base of DART registers */ +#define DART_BASE 0xf8033000UL + +/* Offset from base to control register */ +#define DARTCNTL 0 +/* Offset from base to exception register */ +#define DARTEXCP 0x10 +/* Offset from base to TLB tag registers */ +#define DARTTAG 0x1000 + + +/* Control Register fields */ + +/* base address of table (pfn) */ +#define DARTCNTL_BASE_MASK 0xfffff +#define DARTCNTL_BASE_SHIFT 12 + +#define DARTCNTL_FLUSHTLB 0x400 +#define DARTCNTL_ENABLE 0x200 + +/* size of table in pages */ +#define DARTCNTL_SIZE_MASK 0x1ff +#define DARTCNTL_SIZE_SHIFT 0 + + +/* DART table fields */ + +#define DARTMAP_VALID 0x80000000 +#define DARTMAP_RPNMASK 0x00ffffff + + +#define DART_PAGE_SHIFT 12 +#define DART_PAGE_SIZE (1 << DART_PAGE_SHIFT) +#define DART_PAGE_FACTOR (PAGE_SHIFT - DART_PAGE_SHIFT) + + +#endif /* _POWERPC_SYSDEV_DART_H */ diff --git a/arch/powerpc/sysdev/mmio_nvram.c b/arch/powerpc/sysdev/mmio_nvram.c new file mode 100644 index 00000000000..74e0d31a355 --- /dev/null +++ b/arch/powerpc/sysdev/mmio_nvram.c @@ -0,0 +1,118 @@ +/* + * memory mapped NVRAM + * + * (C) Copyright IBM Corp. 2005 + * + * Authors : Utz Bacher <utz.bacher@de.ibm.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/fs.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/spinlock.h> +#include <linux/types.h> + +#include <asm/machdep.h> +#include <asm/nvram.h> +#include <asm/prom.h> + +static void __iomem *mmio_nvram_start; +static long mmio_nvram_len; +static spinlock_t mmio_nvram_lock = SPIN_LOCK_UNLOCKED; + +static ssize_t mmio_nvram_read(char *buf, size_t count, loff_t *index) +{ + unsigned long flags; + + if (*index >= mmio_nvram_len) + return 0; + if (*index + count > mmio_nvram_len) + count = mmio_nvram_len - *index; + + spin_lock_irqsave(&mmio_nvram_lock, flags); + + memcpy_fromio(buf, mmio_nvram_start + *index, count); + + spin_unlock_irqrestore(&mmio_nvram_lock, flags); + + *index += count; + return count; +} + +static ssize_t mmio_nvram_write(char *buf, size_t count, loff_t *index) +{ + unsigned long flags; + + if (*index >= mmio_nvram_len) + return 0; + if (*index + count > mmio_nvram_len) + count = mmio_nvram_len - *index; + + spin_lock_irqsave(&mmio_nvram_lock, flags); + + memcpy_toio(mmio_nvram_start + *index, buf, count); + + spin_unlock_irqrestore(&mmio_nvram_lock, flags); + + *index += count; + return count; +} + +static ssize_t mmio_nvram_get_size(void) +{ + return mmio_nvram_len; +} + +int __init mmio_nvram_init(void) +{ + struct device_node *nvram_node; + unsigned long *buffer; + int proplen; + unsigned long nvram_addr; + int ret; + + ret = -ENODEV; + nvram_node = of_find_node_by_type(NULL, "nvram"); + if (!nvram_node) + goto out; + + ret = -EIO; + buffer = (unsigned long *)get_property(nvram_node, "reg", &proplen); + if (proplen != 2*sizeof(unsigned long)) + goto out; + + ret = -ENODEV; + nvram_addr = buffer[0]; + mmio_nvram_len = buffer[1]; + if ( (!mmio_nvram_len) || (!nvram_addr) ) + goto out; + + mmio_nvram_start = ioremap(nvram_addr, mmio_nvram_len); + if (!mmio_nvram_start) + goto out; + + printk(KERN_INFO "mmio NVRAM, %luk mapped to %p\n", + mmio_nvram_len >> 10, mmio_nvram_start); + + ppc_md.nvram_read = mmio_nvram_read; + ppc_md.nvram_write = mmio_nvram_write; + ppc_md.nvram_size = mmio_nvram_get_size; + +out: + of_node_put(nvram_node); + return ret; +} diff --git a/arch/powerpc/sysdev/u3_iommu.c b/arch/powerpc/sysdev/u3_iommu.c index fba871a1bda..607722178c1 100644 --- a/arch/powerpc/sysdev/u3_iommu.c +++ b/arch/powerpc/sysdev/u3_iommu.c @@ -1,5 +1,5 @@ /* - * arch/ppc64/kernel/u3_iommu.c + * arch/powerpc/sysdev/u3_iommu.c * * Copyright (C) 2004 Olof Johansson <olof@austin.ibm.com>, IBM Corporation * @@ -44,9 +44,10 @@ #include <asm/abs_addr.h> #include <asm/cacheflush.h> #include <asm/lmb.h> -#include <asm/dart.h> #include <asm/ppc-pci.h> +#include "dart.h" + extern int iommu_force_on; /* Physical base address and size of the DART table */ |