Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 216 insertions, 0 deletions

diff --git a/arch/ppc/boot/simple/relocate.S b/arch/ppc/boot/simple/relocate.S
new file mode 100644
index 00000000000..555a216ccc4
--- /dev/null
+++ b/arch/ppc/boot/simple/relocate.S
@@ -0,0 +1,216 @@
+/*
+ * arch/ppc/boot/simple/relocate.S
+ *
+ * This is the common part of the loader relocation and initialization
+ * process.  All of the board/processor specific initialization is
+ * done before we get here.
+ *
+ * Author: Tom Rini
+ *	   trini@mvista.com
+ * Derived from arch/ppc/boot/prep/head.S (Cort Dougan, many others).
+ *
+ * 2001-2004 (c) MontaVista, Software, Inc.  This file is licensed under
+ * the terms of the GNU General Public License version 2.  This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#include <linux/config.h>
+#include <asm/cache.h>
+#include <asm/ppc_asm.h>
+
+#define GETSYM(reg, sym)	\
+	lis	reg, sym@h; ori	reg, reg, sym@l
+
+	.text
+	/* We get called from the early initialization code.
+	 * Register 3 has the address where we were loaded,
+	 * Register 4 contains any residual data passed from the
+	 * boot rom.
+	 */
+	.globl	relocate
+relocate:
+	/* Save r3, r4 for later.
+	 * The r8/r11 are legacy registers so I don't have to
+	 * rewrite the code below :-).
+	 */
+	mr	r8, r3
+	mr	r11, r4
+
+	/* compute the size of the whole image in words. */
+	GETSYM(r4,start)
+	GETSYM(r5,end)
+
+	addi	r5,r5,3		/* round up */
+	sub	r5,r5,r4	/* end - start */
+	srwi	r5,r5,2
+	mr	r7,r5		/* Save for later use. */
+
+	/*
+	 * Check if we need to relocate ourselves to the link addr or were
+	 * we loaded there to begin with.
+	 */
+	cmpw	cr0,r3,r4
+	beq	start_ldr	/* If 0, we don't need to relocate */
+
+	/* Move this code somewhere safe.  This is max(load + size, end)
+	 * r8 == load address
+	 */
+	GETSYM(r4, start)
+	GETSYM(r5, end)
+
+	sub	r6,r5,r4
+	add	r6,r8,r6	/* r6 == phys(load + size) */
+
+	cmpw	r5,r6
+	bgt	1f
+	b	2f
+1:
+	mr	r6, r5
+2:
+	/* dest is in r6 */
+	/* Ensure alignment --- this code is precautionary */
+	addi	r6,r6,4
+	li	r5,0x0003
+	andc	r6,r6,r5
+
+	/* Find physical address and size of do_relocate */
+	GETSYM(r5, __relocate_start)
+	GETSYM(r4, __relocate_end)
+	GETSYM(r3, start)
+
+	/* Size to copy */
+	sub	r4,r4,r5
+	srwi	r4,r4,2
+
+	/* Src addr to copy (= __relocate_start - start + where_loaded) */
+	sub	r3,r5,r3
+	add	r5,r8,r3
+
+	/* Save dest */
+	mr	r3, r6
+
+	/* Do the copy */
+	mtctr	r4
+3:	lwz	r4,0(r5)
+	stw	r4,0(r3)
+	addi	r3,r3,4
+	addi	r5,r5,4
+	bdnz	3b
+
+	GETSYM(r4, __relocate_start)
+	GETSYM(r5, do_relocate)
+
+	sub	r4,r5,r4	/* Get entry point for do_relocate in */
+	add	r6,r6,r4	/* relocated section */
+
+	/* This will return to the relocated do_relocate */
+	mtlr	r6
+	b	flush_instruction_cache
+
+	.section ".relocate_code","xa"
+	
+do_relocate:
+	/* We have 2 cases --- start < load, or start > load
+	 * This determines whether we copy from the end, or the start.
+	 * Its easier to have 2 loops than to have paramaterised
+	 * loops.  Sigh.
+	 */
+	li	r6,0		/* Clear checksum */
+	mtctr	r7		/* Setup for a loop */
+	
+	GETSYM(r4, start)
+	mr	r3,r8		/* Get the load addr */
+
+	cmpw	cr0,r4,r3	/* If we need to copy from the end, do so */
+	bgt	do_relocate_from_end
+
+do_relocate_from_start:
+1:	lwz	r5,0(r3)	/* Load and decrement */
+	stw	r5,0(r4)	/* Store and decrement */
+	addi	r3,r3,4
+	addi	r4,r4,4
+	xor	r6,r6,r5	/* Update checksum */
+	bdnz	1b		/* Are we done? */
+	b	do_relocate_out	/* Finished */
+
+do_relocate_from_end:
+	GETSYM(r3, end)
+	slwi	r4,r7,2
+	add	r4,r8,r4	/* Get the physical end */
+1:	lwzu	r5,-4(r4)
+	stwu	r5, -4(r3)
+	xor	r6,r6,r5
+	bdnz	1b
+
+do_relocate_out:
+	GETSYM(r3,start_ldr)
+	mtlr	r3		/* Easiest way to do an absolute jump */
+/* Some boards don't boot up with the I-cache enabled.  Do that
+ * now because the decompress runs much faster that way.
+ * As a side effect, we have to ensure the data cache is not enabled
+ * so we can access the serial I/O without trouble.
+ */
+	b	flush_instruction_cache
+
+	.previous
+
+start_ldr:
+/* Clear all of BSS and set up stack for C calls */
+	lis	r3,edata@h
+	ori	r3,r3,edata@l
+	lis	r4,end@h
+	ori	r4,r4,end@l
+	subi	r3,r3,4
+	subi	r4,r4,4
+	li	r0,0
+50:	stwu	r0,4(r3)
+	cmpw	cr0,r3,r4
+	bne	50b
+90:	mr	r9,r1		/* Save old stack pointer (in case it matters) */
+	lis	r1,.stack@h
+	ori	r1,r1,.stack@l
+	addi	r1,r1,4096*2
+	subi	r1,r1,256
+	li	r2,0x000F	/* Mask pointer to 16-byte boundary */
+	andc	r1,r1,r2
+
+	/*
+	 * Exec kernel loader
+	 */
+	mr	r3,r8		/* Load point */
+	mr	r4,r7		/* Program length */
+	mr	r5,r6		/* Checksum */
+	mr	r6,r11		/* Residual data */
+	mr	r7,r25		/* Validated OFW interface */
+	bl	load_kernel
+
+	/*
+	 * Make sure the kernel knows we don't have things set in
+	 * registers.  -- Tom
+	 */
+	li	r4,0
+	li	r5,0
+	li	r6,0
+
+	/*
+	 * Start at the begining.
+	 */
+#ifdef CONFIG_PPC_MULTIPLATFORM
+	li	r9,0xc
+	mtlr	r9
+	/* tell kernel we're prep, by putting 0xdeadc0de at KERNELLOAD,
+	 * and tell the kernel to start on the 4th instruction since we
+	 * overwrite the first 3 sometimes (which are 'nop').
+	 */
+	lis	r10,0xdeadc0de@h
+	ori	r10,r10,0xdeadc0de@l
+	li	r9,0
+	stw	r10,0(r9)
+#else
+	li	r9,0
+	mtlr	r9
+#endif
+	blr
+
+	.comm	.stack,4096*2,4