Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6

Conflicts:

	Documentation/powerpc/booting-without-of.txt
	drivers/atm/Makefile
	drivers/net/fs_enet/fs_enet-main.c
	drivers/pci/pci-acpi.c
	net/8021q/vlan.c
	net/iucv/iucv.c

13 files changed, 0 insertions, 3131 deletions

diff --git a/arch/ppc/mm/44x_mmu.c b/arch/ppc/mm/44x_mmu.c
deleted file mode 100644
index fbb577a0d16..00000000000
--- a/arch/ppc/mm/44x_mmu.c
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
- * Modifications by Matt Porter (mporter@mvista.com) to support
- * PPC44x Book E processors.
- *
- * This file contains the routines for initializing the MMU
- * on the 4xx series of chips.
- *  -- paulus
- *
- *  Derived from arch/ppc/mm/init.c:
- *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *
- *  Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au)
- *  and Cort Dougan (PReP) (cort@cs.nmt.edu)
- *    Copyright (C) 1996 Paul Mackerras
- *  Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk).
- *
- *  Derived from "arch/i386/mm/init.c"
- *    Copyright (C) 1991, 1992, 1993, 1994  Linus Torvalds
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- *
- */
-
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/types.h>
-#include <linux/ptrace.h>
-#include <linux/mman.h>
-#include <linux/mm.h>
-#include <linux/swap.h>
-#include <linux/stddef.h>
-#include <linux/vmalloc.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/highmem.h>
-
-#include <asm/pgalloc.h>
-#include <asm/prom.h>
-#include <asm/io.h>
-#include <asm/mmu_context.h>
-#include <asm/pgtable.h>
-#include <asm/mmu.h>
-#include <asm/uaccess.h>
-#include <asm/smp.h>
-#include <asm/bootx.h>
-#include <asm/machdep.h>
-#include <asm/setup.h>
-
-#include "mmu_decl.h"
-
-extern char etext[], _stext[];
-
-/* Used by the 44x TLB replacement exception handler.
- * Just needed it declared someplace.
- */
-unsigned int tlb_44x_index = 0;
-unsigned int tlb_44x_hwater = PPC4XX_TLB_SIZE - 1 - PPC44x_EARLY_TLBS;
-int icache_44x_need_flush;
-
-/*
- * "Pins" a 256MB TLB entry in AS0 for kernel lowmem
- */
-static void __init ppc44x_pin_tlb(unsigned int virt, unsigned int phys)
-{
-	__asm__ __volatile__(
-		"tlbwe	%2,%3,%4\n"
-		"tlbwe	%1,%3,%5\n"
-		"tlbwe	%0,%3,%6\n"
-	:
-	: "r" (PPC44x_TLB_SW | PPC44x_TLB_SR | PPC44x_TLB_SX | PPC44x_TLB_G),
-	  "r" (phys),
-	  "r" (virt | PPC44x_TLB_VALID | PPC44x_TLB_256M),
-	  "r" (tlb_44x_hwater--), /* slot for this TLB entry */
-	  "i" (PPC44x_TLB_PAGEID),
-	  "i" (PPC44x_TLB_XLAT),
-	  "i" (PPC44x_TLB_ATTRIB));
-}
-
-void __init MMU_init_hw(void)
-{
-	flush_instruction_cache();
-}
-
-unsigned long __init mmu_mapin_ram(void)
-{
-	unsigned long addr;
-
-	/* Pin in enough TLBs to cover any lowmem not covered by the
-	 * initial 256M mapping established in head_44x.S */
-	for (addr = PPC_PIN_SIZE; addr < total_lowmem;
-	     addr += PPC_PIN_SIZE)
-		ppc44x_pin_tlb(addr + PAGE_OFFSET, addr);
-
-	return total_lowmem;
-}
diff --git a/arch/ppc/mm/4xx_mmu.c b/arch/ppc/mm/4xx_mmu.c
deleted file mode 100644
index ea785dbaac7..00000000000
--- a/arch/ppc/mm/4xx_mmu.c
+++ /dev/null
@@ -1,135 +0,0 @@
-/*
- * This file contains the routines for initializing the MMU
- * on the 4xx series of chips.
- *  -- paulus
- *
- *  Derived from arch/ppc/mm/init.c:
- *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *
- *  Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au)
- *  and Cort Dougan (PReP) (cort@cs.nmt.edu)
- *    Copyright (C) 1996 Paul Mackerras
- *  Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk).
- *
- *  Derived from "arch/i386/mm/init.c"
- *    Copyright (C) 1991, 1992, 1993, 1994  Linus Torvalds
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- *
- */
-
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/types.h>
-#include <linux/ptrace.h>
-#include <linux/mman.h>
-#include <linux/mm.h>
-#include <linux/swap.h>
-#include <linux/stddef.h>
-#include <linux/vmalloc.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/highmem.h>
-
-#include <asm/pgalloc.h>
-#include <asm/prom.h>
-#include <asm/io.h>
-#include <asm/mmu_context.h>
-#include <asm/pgtable.h>
-#include <asm/mmu.h>
-#include <asm/uaccess.h>
-#include <asm/smp.h>
-#include <asm/bootx.h>
-#include <asm/machdep.h>
-#include <asm/setup.h>
-#include "mmu_decl.h"
-
-extern int __map_without_ltlbs;
-/*
- * MMU_init_hw does the chip-specific initialization of the MMU hardware.
- */
-void __init MMU_init_hw(void)
-{
-	/*
-	 * The Zone Protection Register (ZPR) defines how protection will
-	 * be applied to every page which is a member of a given zone. At
-	 * present, we utilize only two of the 4xx's zones.
-	 * The zone index bits (of ZSEL) in the PTE are used for software
-	 * indicators, except the LSB.  For user access, zone 1 is used,
-	 * for kernel access, zone 0 is used.  We set all but zone 1
-	 * to zero, allowing only kernel access as indicated in the PTE.
-	 * For zone 1, we set a 01 binary (a value of 10 will not work)
-	 * to allow user access as indicated in the PTE.  This also allows
-	 * kernel access as indicated in the PTE.
-	 */
-
-        mtspr(SPRN_ZPR, 0x10000000);
-
-	flush_instruction_cache();
-
-	/*
-	 * Set up the real-mode cache parameters for the exception vector
-	 * handlers (which are run in real-mode).
-	 */
-
-        mtspr(SPRN_DCWR, 0x00000000);	/* All caching is write-back */
-
-        /*
-	 * Cache instruction and data space where the exception
-	 * vectors and the kernel live in real-mode.
-	 */
-
-        mtspr(SPRN_DCCR, 0xF0000000);	/* 512 MB of data space at 0x0. */
-        mtspr(SPRN_ICCR, 0xF0000000);	/* 512 MB of instr. space at 0x0. */
-}
-
-#define LARGE_PAGE_SIZE_16M	(1<<24)
-#define LARGE_PAGE_SIZE_4M	(1<<22)
-
-unsigned long __init mmu_mapin_ram(void)
-{
-	unsigned long v, s;
-	phys_addr_t p;
-
-	v = KERNELBASE;
-	p = PPC_MEMSTART;
-	s = total_lowmem;
-
-	if (__map_without_ltlbs)
-		return 0;
-
-	while (s >= LARGE_PAGE_SIZE_16M) {
-		pmd_t *pmdp;
-		unsigned long val = p | _PMD_SIZE_16M | _PAGE_HWEXEC | _PAGE_HWWRITE;
-
-		pmdp = pmd_offset(pgd_offset_k(v), v);
-		pmd_val(*pmdp++) = val;
-		pmd_val(*pmdp++) = val;
-		pmd_val(*pmdp++) = val;
-		pmd_val(*pmdp++) = val;
-
-		v += LARGE_PAGE_SIZE_16M;
-		p += LARGE_PAGE_SIZE_16M;
-		s -= LARGE_PAGE_SIZE_16M;
-	}
-
-	while (s >= LARGE_PAGE_SIZE_4M) {
-		pmd_t *pmdp;
-		unsigned long val = p | _PMD_SIZE_4M | _PAGE_HWEXEC | _PAGE_HWWRITE;
-
-		pmdp = pmd_offset(pgd_offset_k(v), v);
-		pmd_val(*pmdp) = val;
-
-		v += LARGE_PAGE_SIZE_4M;
-		p += LARGE_PAGE_SIZE_4M;
-		s -= LARGE_PAGE_SIZE_4M;
-	}
-
-	return total_lowmem - s;
-}
diff --git a/arch/ppc/mm/Makefile b/arch/ppc/mm/Makefile
deleted file mode 100644
index 691ba2bae05..00000000000
--- a/arch/ppc/mm/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-#
-# Makefile for the linux ppc-specific parts of the memory manager.
-#
-
-obj-y				:= fault.o init.o mem_pieces.o \
-					mmu_context.o pgtable.o
-
-obj-$(CONFIG_PPC_STD_MMU)	+= hashtable.o ppc_mmu.o tlb.o
-obj-$(CONFIG_40x)		+= 4xx_mmu.o
-obj-$(CONFIG_44x)		+= 44x_mmu.o
diff --git a/arch/ppc/mm/fault.c b/arch/ppc/mm/fault.c
deleted file mode 100644
index 36c0e7529ed..00000000000
--- a/arch/ppc/mm/fault.c
+++ /dev/null
@@ -1,436 +0,0 @@
-/*
- *  PowerPC version
- *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *
- *  Derived from "arch/i386/mm/fault.c"
- *    Copyright (C) 1991, 1992, 1993, 1994  Linus Torvalds
- *
- *  Modified by Cort Dougan and Paul Mackerras.
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- */
-
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/types.h>
-#include <linux/ptrace.h>
-#include <linux/mman.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/highmem.h>
-#include <linux/module.h>
-
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/mmu.h>
-#include <asm/mmu_context.h>
-#include <asm/system.h>
-#include <asm/uaccess.h>
-#include <asm/tlbflush.h>
-
-#if defined(CONFIG_XMON) || defined(CONFIG_KGDB)
-extern void (*debugger)(struct pt_regs *);
-extern void (*debugger_fault_handler)(struct pt_regs *);
-extern int (*debugger_dabr_match)(struct pt_regs *);
-int debugger_kernel_faults = 1;
-#endif
-
-unsigned long htab_reloads;	/* updated by hashtable.S:hash_page() */
-unsigned long htab_evicts; 	/* updated by hashtable.S:hash_page() */
-unsigned long htab_preloads;	/* updated by hashtable.S:add_hash_page() */
-unsigned long pte_misses;	/* updated by do_page_fault() */
-unsigned long pte_errors;	/* updated by do_page_fault() */
-unsigned int probingmem;
-
-/*
- * Check whether the instruction at regs->nip is a store using
- * an update addressing form which will update r1.
- */
-static int store_updates_sp(struct pt_regs *regs)
-{
-	unsigned int inst;
-
-	if (get_user(inst, (unsigned int __user *)regs->nip))
-		return 0;
-	/* check for 1 in the rA field */
-	if (((inst >> 16) & 0x1f) != 1)
-		return 0;
-	/* check major opcode */
-	switch (inst >> 26) {
-	case 37:	/* stwu */
-	case 39:	/* stbu */
-	case 45:	/* sthu */
-	case 53:	/* stfsu */
-	case 55:	/* stfdu */
-		return 1;
-	case 31:
-		/* check minor opcode */
-		switch ((inst >> 1) & 0x3ff) {
-		case 183:	/* stwux */
-		case 247:	/* stbux */
-		case 439:	/* sthux */
-		case 695:	/* stfsux */
-		case 759:	/* stfdux */
-			return 1;
-		}
-	}
-	return 0;
-}
-
-/*
- * For 600- and 800-family processors, the error_code parameter is DSISR
- * for a data fault, SRR1 for an instruction fault. For 400-family processors
- * the error_code parameter is ESR for a data fault, 0 for an instruction
- * fault.
- */
-int do_page_fault(struct pt_regs *regs, unsigned long address,
-		  unsigned long error_code)
-{
-	struct vm_area_struct * vma;
-	struct mm_struct *mm = current->mm;
-	siginfo_t info;
-	int code = SEGV_MAPERR;
-	int fault;
-#if defined(CONFIG_4xx) || defined (CONFIG_BOOKE)
-	int is_write = error_code & ESR_DST;
-#else
-	int is_write = 0;
-
-	/*
-	 * Fortunately the bit assignments in SRR1 for an instruction
-	 * fault and DSISR for a data fault are mostly the same for the
-	 * bits we are interested in.  But there are some bits which
-	 * indicate errors in DSISR but can validly be set in SRR1.
-	 */
-	if (TRAP(regs) == 0x400)
-		error_code &= 0x48200000;
-	else
-		is_write = error_code & 0x02000000;
-#endif /* CONFIG_4xx || CONFIG_BOOKE */
-
-#if defined(CONFIG_XMON) || defined(CONFIG_KGDB)
-	if (debugger_fault_handler && TRAP(regs) == 0x300) {
-		debugger_fault_handler(regs);
-		return 0;
-	}
-#if !(defined(CONFIG_4xx) || defined(CONFIG_BOOKE))
-	if (error_code & 0x00400000) {
-		/* DABR match */
-		if (debugger_dabr_match(regs))
-			return 0;
-	}
-#endif /* !(CONFIG_4xx || CONFIG_BOOKE)*/
-#endif /* CONFIG_XMON || CONFIG_KGDB */
-
-	if (in_atomic() || mm == NULL)
-		return SIGSEGV;
-
-	down_read(&mm->mmap_sem);
-	vma = find_vma(mm, address);
-	if (!vma)
-		goto bad_area;
-	if (vma->vm_start <= address)
-		goto good_area;
-	if (!(vma->vm_flags & VM_GROWSDOWN))
-		goto bad_area;
-	if (!is_write)
-                goto bad_area;
-
-	/*
-	 * N.B. The rs6000/xcoff ABI allows programs to access up to
-	 * a few hundred bytes below the stack pointer.
-	 * The kernel signal delivery code writes up to about 1.5kB
-	 * below the stack pointer (r1) before decrementing it.
-	 * The exec code can write slightly over 640kB to the stack
-	 * before setting the user r1.  Thus we allow the stack to
-	 * expand to 1MB without further checks.
-	 */
-	if (address + 0x100000 < vma->vm_end) {
-		/* get user regs even if this fault is in kernel mode */
-		struct pt_regs *uregs = current->thread.regs;
-		if (uregs == NULL)
-			goto bad_area;
-
-		/*
-		 * A user-mode access to an address a long way below
-		 * the stack pointer is only valid if the instruction
-		 * is one which would update the stack pointer to the
-		 * address accessed if the instruction completed,
-		 * i.e. either stwu rs,n(r1) or stwux rs,r1,rb
-		 * (or the byte, halfword, float or double forms).
-		 *
-		 * If we don't check this then any write to the area
-		 * between the last mapped region and the stack will
-		 * expand the stack rather than segfaulting.
-		 */
-		if (address + 2048 < uregs->gpr[1]
-		    && (!user_mode(regs) || !store_updates_sp(regs)))
-			goto bad_area;
-	}
-	if (expand_stack(vma, address))
-		goto bad_area;
-
-good_area:
-	code = SEGV_ACCERR;
-#if defined(CONFIG_6xx)
-	if (error_code & 0x95700000)
-		/* an error such as lwarx to I/O controller space,
-		   address matching DABR, eciwx, etc. */
-		goto bad_area;
-#endif /* CONFIG_6xx */
-#if defined(CONFIG_8xx)
-        /* The MPC8xx seems to always set 0x80000000, which is
-         * "undefined".  Of those that can be set, this is the only
-         * one which seems bad.
-         */
-	if (error_code & 0x10000000)
-                /* Guarded storage error. */
-		goto bad_area;
-#endif /* CONFIG_8xx */
-
-	/* a write */
-	if (is_write) {
-		if (!(vma->vm_flags & VM_WRITE))
-			goto bad_area;
-#if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
-	/* an exec  - 4xx/Book-E allows for per-page execute permission */
-	} else if (TRAP(regs) == 0x400) {
-		pte_t *ptep;
-		pmd_t *pmdp;
-
-#if 0
-		/* It would be nice to actually enforce the VM execute
-		   permission on CPUs which can do so, but far too
-		   much stuff in userspace doesn't get the permissions
-		   right, so we let any page be executed for now. */
-		if (! (vma->vm_flags & VM_EXEC))
-			goto bad_area;
-#endif
-
-		/* Since 4xx/Book-E supports per-page execute permission,
-		 * we lazily flush dcache to icache. */
-		ptep = NULL;
-		if (get_pteptr(mm, address, &ptep, &pmdp)) {
-			spinlock_t *ptl = pte_lockptr(mm, pmdp);
-			spin_lock(ptl);
-			if (pte_present(*ptep)) {
-				struct page *page = pte_page(*ptep);
-
-				if (!test_bit(PG_arch_1, &page->flags)) {
-					flush_dcache_icache_page(page);
-					set_bit(PG_arch_1, &page->flags);
-				}
-				pte_update(ptep, 0, _PAGE_HWEXEC);
-				_tlbie(address, mm->context.id);
-				pte_unmap_unlock(ptep, ptl);
-				up_read(&mm->mmap_sem);
-				return 0;
-			}
-			pte_unmap_unlock(ptep, ptl);
-		}
-#endif
-	/* a read */
-	} else {
-		/* protection fault */
-		if (error_code & 0x08000000)
-			goto bad_area;
-		if (!(vma->vm_flags & (VM_READ | VM_EXEC | VM_WRITE)))
-			goto bad_area;
-	}
-
-	/*
-	 * If for any reason at all we couldn't handle the fault,
-	 * make sure we exit gracefully rather than endlessly redo
-	 * the fault.
-	 */
- survive:
-	fault = handle_mm_fault(mm, vma, address, is_write);
-	if (unlikely(fault & VM_FAULT_ERROR)) {
-		if (fault & VM_FAULT_OOM)
-			goto out_of_memory;
-		else if (fault & VM_FAULT_SIGBUS)
-			goto do_sigbus;
-		BUG();
-	}
-	if (fault & VM_FAULT_MAJOR)
-		current->maj_flt++;
-	else
-		current->min_flt++;
-
-	up_read(&mm->mmap_sem);
-	/*
-	 * keep track of tlb+htab misses that are good addrs but
-	 * just need pte's created via handle_mm_fault()
-	 * -- Cort
-	 */
-	pte_misses++;
-	return 0;
-
-bad_area:
-	up_read(&mm->mmap_sem);
-	pte_errors++;
-
-	/* User mode accesses cause a SIGSEGV */
-	if (user_mode(regs)) {
-		_exception(SIGSEGV, regs, code, address);
-		return 0;
-	}
-
-	return SIGSEGV;
-
-/*
- * We ran out of memory, or some other thing happened to us that made
- * us unable to handle the page fault gracefully.
- */
-out_of_memory:
-	up_read(&mm->mmap_sem);
-	if (is_global_init(current)) {
-		yield();
-		down_read(&mm->mmap_sem);
-		goto survive;
-	}
-	printk("VM: killing process %s\n", current->comm);
-	if (user_mode(regs))
-		do_group_exit(SIGKILL);
-	return SIGKILL;
-
-do_sigbus:
-	up_read(&mm->mmap_sem);
-	info.si_signo = SIGBUS;
-	info.si_errno = 0;
-	info.si_code = BUS_ADRERR;
-	info.si_addr = (void __user *)address;
-	force_sig_info (SIGBUS, &info, current);
-	if (!user_mode(regs))
-		return SIGBUS;
-	return 0;
-}
-
-/*
- * bad_page_fault is called when we have a bad access from the kernel.
- * It is called from the DSI and ISI handlers in head.S and from some
- * of the procedures in traps.c.
- */
-void
-bad_page_fault(struct pt_regs *regs, unsigned long address, int sig)
-{
-	const struct exception_table_entry *entry;
-
-	/* Are we prepared to handle this fault?  */
-	if ((entry = search_exception_tables(regs->nip)) != NULL) {
-		regs->nip = entry->fixup;
-		return;
-	}
-
-	/* kernel has accessed a bad area */
-#if defined(CONFIG_XMON) || defined(CONFIG_KGDB)
-	if (debugger_kernel_faults)
-		debugger(regs);
-#endif
-	die("kernel access of bad area", regs, sig);
-}
-
-#ifdef CONFIG_8xx
-
-/* The pgtable.h claims some functions generically exist, but I
- * can't find them......
- */
-pte_t *va_to_pte(unsigned long address)
-{
-	pgd_t *dir;
-	pmd_t *pmd;
-	pte_t *pte;
-
-	if (address < TASK_SIZE)
-		return NULL;
-
-	dir = pgd_offset(&init_mm, address);
-	if (dir) {
-		pmd = pmd_offset(dir, address & PAGE_MASK);
-		if (pmd && pmd_present(*pmd)) {
-			pte = pte_offset_kernel(pmd, address & PAGE_MASK);
-			if (pte && pte_present(*pte))
-				return(pte);
-		}
-	}
-	return NULL;
-}
-
-unsigned long va_to_phys(unsigned long address)
-{
-	pte_t *pte;
-
-	pte = va_to_pte(address);
-	if (pte)
-		return(((unsigned long)(pte_val(*pte)) & PAGE_MASK) | (address & ~(PAGE_MASK)));
-	return (0);
-}
-
-void
-print_8xx_pte(struct mm_struct *mm, unsigned long addr)
-{
-        pgd_t * pgd;
-        pmd_t * pmd;
-        pte_t * pte;
-
-        printk(" pte @ 0x%8lx: ", addr);
-        pgd = pgd_offset(mm, addr & PAGE_MASK);
-        if (pgd) {
-                pmd = pmd_offset(pgd, addr & PAGE_MASK);
-                if (pmd && pmd_present(*pmd)) {
-                        pte = pte_offset_kernel(pmd, addr & PAGE_MASK);
-                        if (pte) {
-                                printk(" (0x%08lx)->(0x%08lx)->0x%08lx\n",
-                                        (long)pgd, (long)pte, (long)pte_val(*pte));
-#define pp ((long)pte_val(*pte))			
-				printk(" RPN: %05lx PP: %lx SPS: %lx SH: %lx "
-				       "CI: %lx v: %lx\n",
-				       pp>>12,    /* rpn */
-				       (pp>>10)&3, /* pp */
-				       (pp>>3)&1, /* small */
-				       (pp>>2)&1, /* shared */
-				       (pp>>1)&1, /* cache inhibit */
-				       pp&1       /* valid */
-				       );
-#undef pp			
-                        }
-                        else {
-                                printk("no pte\n");
-                        }
-                }
-                else {
-                        printk("no pmd\n");
-                }
-        }
-        else {
-                printk("no pgd\n");
-        }
-}
-
-int
-get_8xx_pte(struct mm_struct *mm, unsigned long addr)
-{
-        pgd_t * pgd;
-        pmd_t * pmd;
-        pte_t * pte;
-        int     retval = 0;
-
-        pgd = pgd_offset(mm, addr & PAGE_MASK);
-        if (pgd) {
-                pmd = pmd_offset(pgd, addr & PAGE_MASK);
-                if (pmd && pmd_present(*pmd)) {
-                        pte = pte_offset_kernel(pmd, addr & PAGE_MASK);
-                        if (pte) {
-				retval = (int)pte_val(*pte);
-                        }
-                }
-        }
-        return(retval);
-}
-#endif /* CONFIG_8xx */
diff --git a/arch/ppc/mm/hashtable.S b/arch/ppc/mm/hashtable.S
deleted file mode 100644
index 5f364dc5015..00000000000
--- a/arch/ppc/mm/hashtable.S
+++ /dev/null
@@ -1,617 +0,0 @@
-/*
- *  $Id: hashtable.S,v 1.6 1999/10/08 01:56:15 paulus Exp $
- *
- *  PowerPC version
- *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *  Rewritten by Cort Dougan (cort@cs.nmt.edu) for PReP
- *    Copyright (C) 1996 Cort Dougan <cort@cs.nmt.edu>
- *  Adapted for Power Macintosh by Paul Mackerras.
- *  Low-level exception handlers and MMU support
- *  rewritten by Paul Mackerras.
- *    Copyright (C) 1996 Paul Mackerras.
- *
- *  This file contains low-level assembler routines for managing
- *  the PowerPC MMU hash table.  (PPC 8xx processors don't use a
- *  hash table, so this file is not used on them.)
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- *
- */
-
-#include <asm/processor.h>
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/cputable.h>
-#include <asm/ppc_asm.h>
-#include <asm/thread_info.h>
-#include <asm/asm-offsets.h>
-
-#ifdef CONFIG_SMP
-	.section .bss
-	.align	2
-	.globl mmu_hash_lock
-mmu_hash_lock:
-	.space	4
-#endif /* CONFIG_SMP */
-
-/*
- * Sync CPUs with hash_page taking & releasing the hash
- * table lock
- */
-#ifdef CONFIG_SMP
-	.text
-_GLOBAL(hash_page_sync)
-	lis	r8,mmu_hash_lock@h
-	ori	r8,r8,mmu_hash_lock@l
-	lis	r0,0x0fff
-	b	10f
-11:	lwz	r6,0(r8)
-	cmpwi	0,r6,0
-	bne	11b
-10:	lwarx	r6,0,r8
-	cmpwi	0,r6,0
-	bne-	11b
-	stwcx.	r0,0,r8
-	bne-	10b
-	isync
-	eieio
-	li	r0,0
-	stw	r0,0(r8)
-	blr	
-#endif
-
-/*
- * Load a PTE into the hash table, if possible.
- * The address is in r4, and r3 contains an access flag:
- * _PAGE_RW (0x400) if a write.
- * r9 contains the SRR1 value, from which we use the MSR_PR bit.
- * SPRG3 contains the physical address of the current task's thread.
- *
- * Returns to the caller if the access is illegal or there is no
- * mapping for the address.  Otherwise it places an appropriate PTE
- * in the hash table and returns from the exception.
- * Uses r0, r3 - r8, ctr, lr.
- */
-	.text
-_GLOBAL(hash_page)
-	tophys(r7,0)			/* gets -KERNELBASE into r7 */
-#ifdef CONFIG_SMP
-	addis	r8,r7,mmu_hash_lock@h
-	ori	r8,r8,mmu_hash_lock@l
-	lis	r0,0x0fff
-	b	10f
-11:	lwz	r6,0(r8)
-	cmpwi	0,r6,0
-	bne	11b
-10:	lwarx	r6,0,r8
-	cmpwi	0,r6,0
-	bne-	11b
-	stwcx.	r0,0,r8
-	bne-	10b
-	isync
-#endif
-	/* Get PTE (linux-style) and check access */
-	lis	r0,KERNELBASE@h		/* check if kernel address */
-	cmplw	0,r4,r0
-	mfspr	r8,SPRN_SPRG3		/* current task's THREAD (phys) */
-	ori	r3,r3,_PAGE_USER|_PAGE_PRESENT /* test low addresses as user */
-	lwz	r5,PGDIR(r8)		/* virt page-table root */
-	blt+	112f			/* assume user more likely */
-	lis	r5,swapper_pg_dir@ha	/* if kernel address, use */
-	addi	r5,r5,swapper_pg_dir@l	/* kernel page table */
-	rlwimi	r3,r9,32-12,29,29	/* MSR_PR -> _PAGE_USER */
-112:	add	r5,r5,r7		/* convert to phys addr */
-	rlwimi	r5,r4,12,20,29		/* insert top 10 bits of address */
-	lwz	r8,0(r5)		/* get pmd entry */
-	rlwinm.	r8,r8,0,0,19		/* extract address of pte page */
-#ifdef CONFIG_SMP
-	beq-	hash_page_out		/* return if no mapping */
-#else
-	/* XXX it seems like the 601 will give a machine fault on the
-	   rfi if its alignment is wrong (bottom 4 bits of address are
-	   8 or 0xc) and we have had a not-taken conditional branch
-	   to the address following the rfi. */
-	beqlr-
-#endif
-	rlwimi	r8,r4,22,20,29		/* insert next 10 bits of address */
-	rlwinm	r0,r3,32-3,24,24	/* _PAGE_RW access -> _PAGE_DIRTY */
-	ori	r0,r0,_PAGE_ACCESSED|_PAGE_HASHPTE
-
-	/*
-	 * Update the linux PTE atomically.  We do the lwarx up-front
-	 * because almost always, there won't be a permission violation
-	 * and there won't already be an HPTE, and thus we will have
-	 * to update the PTE to set _PAGE_HASHPTE.  -- paulus.
-	 */
-retry:
-	lwarx	r6,0,r8			/* get linux-style pte */
-	andc.	r5,r3,r6		/* check access & ~permission */
-#ifdef CONFIG_SMP
-	bne-	hash_page_out		/* return if access not permitted */
-#else
-	bnelr-
-#endif
-	or	r5,r0,r6		/* set accessed/dirty bits */
-	stwcx.	r5,0,r8			/* attempt to update PTE */
-	bne-	retry			/* retry if someone got there first */
-
-	mfsrin	r3,r4			/* get segment reg for segment */
-	mfctr	r0
-	stw	r0,_CTR(r11)
-	bl	create_hpte		/* add the hash table entry */
-
-/*
- * htab_reloads counts the number of times we have to fault an
- * HPTE into the hash table.  This should only happen after a
- * fork (because fork does a flush_tlb_mm) or a vmalloc or ioremap.
- * Where a page is faulted into a process's address space,
- * update_mmu_cache gets called to put the HPTE into the hash table
- * and those are counted as preloads rather than reloads.
- */
-	addis	r8,r7,htab_reloads@ha
-	lwz	r3,htab_reloads@l(r8)
-	addi	r3,r3,1
-	stw	r3,htab_reloads@l(r8)
-
-#ifdef CONFIG_SMP
-	eieio
-	addis	r8,r7,mmu_hash_lock@ha
-	li	r0,0
-	stw	r0,mmu_hash_lock@l(r8)
-#endif
-
-	/* Return from the exception */
-	lwz	r5,_CTR(r11)
-	mtctr	r5
-	lwz	r0,GPR0(r11)
-	lwz	r7,GPR7(r11)
-	lwz	r8,GPR8(r11)
-	b	fast_exception_return
-
-#ifdef CONFIG_SMP
-hash_page_out:
-	eieio
-	addis	r8,r7,mmu_hash_lock@ha
-	li	r0,0
-	stw	r0,mmu_hash_lock@l(r8)
-	blr
-#endif /* CONFIG_SMP */
-
-/*
- * Add an entry for a particular page to the hash table.
- *
- * add_hash_page(unsigned context, unsigned long va, unsigned long pmdval)
- *
- * We assume any necessary modifications to the pte (e.g. setting
- * the accessed bit) have already been done and that there is actually
- * a hash table in use (i.e. we're not on a 603).
- */
-_GLOBAL(add_hash_page)
-	mflr	r0
-	stw	r0,4(r1)
-
-	/* Convert context and va to VSID */
-	mulli	r3,r3,897*16		/* multiply context by context skew */
-	rlwinm	r0,r4,4,28,31		/* get ESID (top 4 bits of va) */
-	mulli	r0,r0,0x111		/* multiply by ESID skew */
-	add	r3,r3,r0		/* note create_hpte trims to 24 bits */
-
-#ifdef CONFIG_SMP
-	rlwinm	r8,r1,0,0,18		/* use cpu number to make tag */
-	lwz	r8,TI_CPU(r8)		/* to go in mmu_hash_lock */
-	oris	r8,r8,12
-#endif /* CONFIG_SMP */
-
-	/*
-	 * We disable interrupts here, even on UP, because we don't
-	 * want to race with hash_page, and because we want the
-	 * _PAGE_HASHPTE bit to be a reliable indication of whether
-	 * the HPTE exists (or at least whether one did once).
-	 * We also turn off the MMU for data accesses so that we
-	 * we can't take a hash table miss (assuming the code is
-	 * covered by a BAT).  -- paulus
-	 */
-	mfmsr	r10
-	SYNC
-	rlwinm	r0,r10,0,17,15		/* clear bit 16 (MSR_EE) */
-	rlwinm	r0,r0,0,28,26		/* clear MSR_DR */
-	mtmsr	r0
-	SYNC_601
-	isync
-
-	tophys(r7,0)
-
-#ifdef CONFIG_SMP
-	addis	r9,r7,mmu_hash_lock@ha
-	addi	r9,r9,mmu_hash_lock@l
-10:	lwarx	r0,0,r9			/* take the mmu_hash_lock */
-	cmpi	0,r0,0
-	bne-	11f
-	stwcx.	r8,0,r9
-	beq+	12f
-11:	lwz	r0,0(r9)
-	cmpi	0,r0,0
-	beq	10b
-	b	11b
-12:	isync
-#endif
-
-	/*
-	 * Fetch the linux pte and test and set _PAGE_HASHPTE atomically.
-	 * If _PAGE_HASHPTE was already set, we don't replace the existing
-	 * HPTE, so we just unlock and return.
-	 */
-	mr	r8,r5
-	rlwimi	r8,r4,22,20,29
-1:	lwarx	r6,0,r8
-	andi.	r0,r6,_PAGE_HASHPTE
-	bne	9f			/* if HASHPTE already set, done */
-	ori	r5,r6,_PAGE_HASHPTE
-	stwcx.	r5,0,r8
-	bne-	1b
-
-	bl	create_hpte
-
-	addis	r8,r7,htab_preloads@ha
-	lwz	r3,htab_preloads@l(r8)
-	addi	r3,r3,1
-	stw	r3,htab_preloads@l(r8)
-
-9:
-#ifdef CONFIG_SMP
-	eieio
-	li	r0,0
-	stw	r0,0(r9)		/* clear mmu_hash_lock */
-#endif
-
-	/* reenable interrupts and DR */
-	mtmsr	r10
-	SYNC_601
-	isync
-
-	lwz	r0,4(r1)
-	mtlr	r0
-	blr
-
-/*
- * This routine adds a hardware PTE to the hash table.
- * It is designed to be called with the MMU either on or off.
- * r3 contains the VSID, r4 contains the virtual address,
- * r5 contains the linux PTE, r6 contains the old value of the
- * linux PTE (before setting _PAGE_HASHPTE) and r7 contains the
- * offset to be added to addresses (0 if the MMU is on,
- * -KERNELBASE if it is off).
- * On SMP, the caller should have the mmu_hash_lock held.
- * We assume that the caller has (or will) set the _PAGE_HASHPTE
- * bit in the linux PTE in memory.  The value passed in r6 should
- * be the old linux PTE value; if it doesn't have _PAGE_HASHPTE set
- * this routine will skip the search for an existing HPTE.
- * This procedure modifies r0, r3 - r6, r8, cr0.
- *  -- paulus.
- *
- * For speed, 4 of the instructions get patched once the size and
- * physical address of the hash table are known.  These definitions
- * of Hash_base and Hash_bits below are just an example.
- */
-Hash_base = 0xc0180000
-Hash_bits = 12				/* e.g. 256kB hash table */
-Hash_msk = (((1 << Hash_bits) - 1) * 64)
-
-/* defines for the PTE format for 32-bit PPCs */
-#define PTE_SIZE	8
-#define PTEG_SIZE	64
-#define LG_PTEG_SIZE	6
-#define LDPTEu		lwzu
-#define STPTE		stw
-#define CMPPTE		cmpw
-#define PTE_H		0x40
-#define PTE_V		0x80000000
-#define TST_V(r)	rlwinm. r,r,0,0,0
-#define SET_V(r)	oris r,r,PTE_V@h
-#define CLR_V(r,t)	rlwinm r,r,0,1,31
-
-#define HASH_LEFT	31-(LG_PTEG_SIZE+Hash_bits-1)
-#define HASH_RIGHT	31-LG_PTEG_SIZE
-
-_GLOBAL(create_hpte)
-	/* Convert linux-style PTE (r5) to low word of PPC-style PTE (r8) */
-	rlwinm	r8,r5,32-10,31,31	/* _PAGE_RW -> PP lsb */
-	rlwinm	r0,r5,32-7,31,31	/* _PAGE_DIRTY -> PP lsb */
-	and	r8,r8,r0		/* writable if _RW & _DIRTY */
-	rlwimi	r5,r5,32-1,30,30	/* _PAGE_USER -> PP msb */
-	rlwimi	r5,r5,32-2,31,31	/* _PAGE_USER -> PP lsb */
-	ori	r8,r8,0xe14		/* clear out reserved bits and M */
-	andc	r8,r5,r8		/* PP = user? (rw&dirty? 2: 3): 0 */
-BEGIN_FTR_SECTION
-	ori	r8,r8,_PAGE_COHERENT	/* set M (coherence required) */
-END_FTR_SECTION_IFSET(CPU_FTR_NEED_COHERENT)
-
-	/* Construct the high word of the PPC-style PTE (r5) */
-	rlwinm	r5,r3,7,1,24		/* put VSID in 0x7fffff80 bits */
-	rlwimi	r5,r4,10,26,31		/* put in API (abbrev page index) */
-	SET_V(r5)			/* set V (valid) bit */
-
-	/* Get the address of the primary PTE group in the hash table (r3) */
-_GLOBAL(hash_page_patch_A)
-	addis	r0,r7,Hash_base@h	/* base address of hash table */
-	rlwimi	r0,r3,LG_PTEG_SIZE,HASH_LEFT,HASH_RIGHT    /* VSID -> hash */
-	rlwinm	r3,r4,20+LG_PTEG_SIZE,HASH_LEFT,HASH_RIGHT /* PI -> hash */
-	xor	r3,r3,r0		/* make primary hash */
-	li	r0,8			/* PTEs/group */
-
-	/*
-	 * Test the _PAGE_HASHPTE bit in the old linux PTE, and skip the search
-	 * if it is clear, meaning that the HPTE isn't there already...
-	 */
-	andi.	r6,r6,_PAGE_HASHPTE
-	beq+	10f			/* no PTE: go look for an empty slot */
-	tlbie	r4
-
-	addis	r4,r7,htab_hash_searches@ha
-	lwz	r6,htab_hash_searches@l(r4)
-	addi	r6,r6,1			/* count how many searches we do */
-	stw	r6,htab_hash_searches@l(r4)
-
-	/* Search the primary PTEG for a PTE whose 1st (d)word matches r5 */
-	mtctr	r0
-	addi	r4,r3,-PTE_SIZE
-1:	LDPTEu	r6,PTE_SIZE(r4)		/* get next PTE */
-	CMPPTE	0,r6,r5
-	bdnzf	2,1b			/* loop while ctr != 0 && !cr0.eq */
-	beq+	found_slot
-
-	/* Search the secondary PTEG for a matching PTE */
-	ori	r5,r5,PTE_H		/* set H (secondary hash) bit */
-_GLOBAL(hash_page_patch_B)
-	xoris	r4,r3,Hash_msk>>16	/* compute secondary hash */
-	xori	r4,r4,(-PTEG_SIZE & 0xffff)
-	addi	r4,r4,-PTE_SIZE
-	mtctr	r0
-2:	LDPTEu	r6,PTE_SIZE(r4)
-	CMPPTE	0,r6,r5
-	bdnzf	2,2b
-	beq+	found_slot
-	xori	r5,r5,PTE_H		/* clear H bit again */
-
-	/* Search the primary PTEG for an empty slot */
-10:	mtctr	r0
-	addi	r4,r3,-PTE_SIZE		/* search primary PTEG */
-1:	LDPTEu	r6,PTE_SIZE(r4)		/* get next PTE */
-	TST_V(r6)			/* test valid bit */
-	bdnzf	2,1b			/* loop while ctr != 0 && !cr0.eq */
-	beq+	found_empty
-
-	/* update counter of times that the primary PTEG is full */
-	addis	r4,r7,primary_pteg_full@ha
-	lwz	r6,primary_pteg_full@l(r4)
-	addi	r6,r6,1
-	stw	r6,primary_pteg_full@l(r4)
-
-	/* Search the secondary PTEG for an empty slot */
-	ori	r5,r5,PTE_H		/* set H (secondary hash) bit */
-_GLOBAL(hash_page_patch_C)
-	xoris	r4,r3,Hash_msk>>16	/* compute secondary hash */
-	xori	r4,r4,(-PTEG_SIZE & 0xffff)
-	addi	r4,r4,-PTE_SIZE
-	mtctr	r0
-2:	LDPTEu	r6,PTE_SIZE(r4)
-	TST_V(r6)
-	bdnzf	2,2b
-	beq+	found_empty
-	xori	r5,r5,PTE_H		/* clear H bit again */
-
-	/*
-	 * Choose an arbitrary slot in the primary PTEG to overwrite.
-	 * Since both the primary and secondary PTEGs are full, and we
-	 * have no information that the PTEs in the primary PTEG are
-	 * more important or useful than those in the secondary PTEG,
-	 * and we know there is a definite (although small) speed
-	 * advantage to putting the PTE in the primary PTEG, we always
-	 * put the PTE in the primary PTEG.
-	 */
-	addis	r4,r7,next_slot@ha
-	lwz	r6,next_slot@l(r4)
-	addi	r6,r6,PTE_SIZE
-	andi.	r6,r6,7*PTE_SIZE
-	stw	r6,next_slot@l(r4)
-	add	r4,r3,r6
-
-	/* update counter of evicted pages */
-	addis	r6,r7,htab_evicts@ha
-	lwz	r3,htab_evicts@l(r6)
-	addi	r3,r3,1
-	stw	r3,htab_evicts@l(r6)
-
-#ifndef CONFIG_SMP
-	/* Store PTE in PTEG */
-found_empty:
-	STPTE	r5,0(r4)
-found_slot:
-	STPTE	r8,PTE_SIZE/2(r4)
-
-#else /* CONFIG_SMP */
-/*
- * Between the tlbie above and updating the hash table entry below,
- * another CPU could read the hash table entry and put it in its TLB.
- * There are 3 cases:
- * 1. using an empty slot
- * 2. updating an earlier entry to change permissions (i.e. enable write)
- * 3. taking over the PTE for an unrelated address
- *
- * In each case it doesn't really matter if the other CPUs have the old
- * PTE in their TLB.  So we don't need to bother with another tlbie here,
- * which is convenient as we've overwritten the register that had the
- * address. :-)  The tlbie above is mainly to make sure that this CPU comes
- * and gets the new PTE from the hash table.
- *
- * We do however have to make sure that the PTE is never in an invalid
- * state with the V bit set.
- */
-found_empty:
-found_slot:
-	CLR_V(r5,r0)		/* clear V (valid) bit in PTE */
-	STPTE	r5,0(r4)
-	sync
-	TLBSYNC
-	STPTE	r8,PTE_SIZE/2(r4) /* put in correct RPN, WIMG, PP bits */
-	sync
-	SET_V(r5)
-	STPTE	r5,0(r4)	/* finally set V bit in PTE */
-#endif /* CONFIG_SMP */
-
-	sync		/* make sure pte updates get to memory */
-	blr
-
-	.section .bss
-	.align	2
-next_slot:
-	.space	4
-	.globl primary_pteg_full
-primary_pteg_full:
-	.space	4
-	.globl htab_hash_searches
-htab_hash_searches:
-	.space	4
-	.previous
-
-/*
- * Flush the entry for a particular page from the hash table.
- *
- * flush_hash_pages(unsigned context, unsigned long va, unsigned long pmdval,
- *		    int count)
- *
- * We assume that there is a hash table in use (Hash != 0).
- */
-_GLOBAL(flush_hash_pages)
-	tophys(r7,0)
-
-	/*
-	 * We disable interrupts here, even on UP, because we want
-	 * the _PAGE_HASHPTE bit to be a reliable indication of
-	 * whether the HPTE exists (or at least whether one did once).
-	 * We also turn off the MMU for data accesses so that we
-	 * we can't take a hash table miss (assuming the code is
-	 * covered by a BAT).  -- paulus
-	 */
-	mfmsr	r10
-	SYNC
-	rlwinm	r0,r10,0,17,15		/* clear bit 16 (MSR_EE) */
-	rlwinm	r0,r0,0,28,26		/* clear MSR_DR */
-	mtmsr	r0
-	SYNC_601
-	isync
-
-	/* First find a PTE in the range that has _PAGE_HASHPTE set */
-	rlwimi	r5,r4,22,20,29
-1:	lwz	r0,0(r5)
-	cmpwi	cr1,r6,1
-	andi.	r0,r0,_PAGE_HASHPTE
-	bne	2f
-	ble	cr1,19f
-	addi	r4,r4,0x1000
-	addi	r5,r5,4
-	addi	r6,r6,-1
-	b	1b
-
-	/* Convert context and va to VSID */
-2:	mulli	r3,r3,897*16		/* multiply context by context skew */
-	rlwinm	r0,r4,4,28,31		/* get ESID (top 4 bits of va) */
-	mulli	r0,r0,0x111		/* multiply by ESID skew */
-	add	r3,r3,r0		/* note code below trims to 24 bits */
-
-	/* Construct the high word of the PPC-style PTE (r11) */
-	rlwinm	r11,r3,7,1,24		/* put VSID in 0x7fffff80 bits */
-	rlwimi	r11,r4,10,26,31		/* put in API (abbrev page index) */
-	SET_V(r11)			/* set V (valid) bit */
-
-#ifdef CONFIG_SMP
-	addis	r9,r7,mmu_hash_lock@ha
-	addi	r9,r9,mmu_hash_lock@l
-	rlwinm	r8,r1,0,0,18
-	add	r8,r8,r7
-	lwz	r8,TI_CPU(r8)
-	oris	r8,r8,9
-10:	lwarx	r0,0,r9
-	cmpi	0,r0,0
-	bne-	11f
-	stwcx.	r8,0,r9
-	beq+	12f
-11:	lwz	r0,0(r9)
-	cmpi	0,r0,0
-	beq	10b
-	b	11b
-12:	isync
-#endif
-
-	/*
-	 * Check the _PAGE_HASHPTE bit in the linux PTE.  If it is
-	 * already clear, we're done (for this pte).  If not,
-	 * clear it (atomically) and proceed.  -- paulus.
-	 */
-33:	lwarx	r8,0,r5			/* fetch the pte */
-	andi.	r0,r8,_PAGE_HASHPTE
-	beq	8f			/* done if HASHPTE is already clear */
-	rlwinm	r8,r8,0,31,29		/* clear HASHPTE bit */
-	stwcx.	r8,0,r5			/* update the pte */
-	bne-	33b
-
-	/* Get the address of the primary PTE group in the hash table (r3) */
-_GLOBAL(flush_hash_patch_A)
-	addis	r8,r7,Hash_base@h	/* base address of hash table */
-	rlwimi	r8,r3,LG_PTEG_SIZE,HASH_LEFT,HASH_RIGHT    /* VSID -> hash */
-	rlwinm	r0,r4,20+LG_PTEG_SIZE,HASH_LEFT,HASH_RIGHT /* PI -> hash */
-	xor	r8,r0,r8		/* make primary hash */
-
-	/* Search the primary PTEG for a PTE whose 1st (d)word matches r5 */
-	li	r0,8			/* PTEs/group */
-	mtctr	r0
-	addi	r12,r8,-PTE_SIZE
-1:	LDPTEu	r0,PTE_SIZE(r12)	/* get next PTE */
-	CMPPTE	0,r0,r11
-	bdnzf	2,1b			/* loop while ctr != 0 && !cr0.eq */
-	beq+	3f
-
-	/* Search the secondary PTEG for a matching PTE */
-	ori	r11,r11,PTE_H		/* set H (secondary hash) bit */
-	li	r0,8			/* PTEs/group */
-_GLOBAL(flush_hash_patch_B)
-	xoris	r12,r8,Hash_msk>>16	/* compute secondary hash */
-	xori	r12,r12,(-PTEG_SIZE & 0xffff)
-	addi	r12,r12,-PTE_SIZE
-	mtctr	r0
-2:	LDPTEu	r0,PTE_SIZE(r12)
-	CMPPTE	0,r0,r11
-	bdnzf	2,2b
-	xori	r11,r11,PTE_H		/* clear H again */
-	bne-	4f			/* should rarely fail to find it */
-
-3:	li	r0,0
-	STPTE	r0,0(r12)		/* invalidate entry */
-4:	sync
-	tlbie	r4			/* in hw tlb too */
-	sync
-
-8:	ble	cr1,9f			/* if all ptes checked */
-81:	addi	r6,r6,-1
-	addi	r5,r5,4			/* advance to next pte */
-	addi	r4,r4,0x1000
-	lwz	r0,0(r5)		/* check next pte */
-	cmpwi	cr1,r6,1
-	andi.	r0,r0,_PAGE_HASHPTE
-	bne	33b
-	bgt	cr1,81b
-
-9:
-#ifdef CONFIG_SMP
-	TLBSYNC
-	li	r0,0
-	stw	r0,0(r9)		/* clear mmu_hash_lock */
-#endif
-
-19:	mtmsr	r10
-	SYNC_601
-	isync
-	blr
diff --git a/arch/ppc/mm/init.c b/arch/ppc/mm/init.c
deleted file mode 100644
index 1a63711081b..00000000000
--- a/arch/ppc/mm/init.c
+++ /dev/null
@@ -1,603 +0,0 @@
-/*
- *  PowerPC version
- *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *
- *  Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au)
- *  and Cort Dougan (PReP) (cort@cs.nmt.edu)
- *    Copyright (C) 1996 Paul Mackerras
- *  Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk).
- *  PPC44x/36-bit changes by Matt Porter (mporter@mvista.com)
- *
- *  Derived from "arch/i386/mm/init.c"
- *    Copyright (C) 1991, 1992, 1993, 1994  Linus Torvalds
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- *
- */
-
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/stddef.h>
-#include <linux/init.h>
-#include <linux/bootmem.h>
-#include <linux/highmem.h>
-#include <linux/initrd.h>
-#include <linux/pagemap.h>
-
-#include <asm/pgalloc.h>
-#include <asm/prom.h>
-#include <asm/io.h>
-#include <asm/mmu_context.h>
-#include <asm/pgtable.h>
-#include <asm/mmu.h>
-#include <asm/smp.h>
-#include <asm/machdep.h>
-#include <asm/btext.h>
-#include <asm/tlb.h>
-#include <asm/bootinfo.h>
-
-#include "mem_pieces.h"
-#include "mmu_decl.h"
-
-#if defined(CONFIG_KERNEL_START_BOOL) || defined(CONFIG_LOWMEM_SIZE_BOOL)
-/* The amount of lowmem must be within 0xF0000000 - KERNELBASE. */
-#if (CONFIG_LOWMEM_SIZE > (0xF0000000 - KERNELBASE))
-#error "You must adjust CONFIG_LOWMEM_SIZE or CONFIG_START_KERNEL"
-#endif
-#endif
-#define MAX_LOW_MEM	CONFIG_LOWMEM_SIZE
-
-DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
-
-unsigned long total_memory;
-unsigned long total_lowmem;
-
-unsigned long ppc_memstart;
-unsigned long ppc_memoffset = PAGE_OFFSET;
-
-int mem_init_done;
-int init_bootmem_done;
-int boot_mapsize;
-
-extern char _end[];
-extern char etext[], _stext[];
-extern char __init_begin, __init_end;
-
-#ifdef CONFIG_HIGHMEM
-pte_t *kmap_pte;
-pgprot_t kmap_prot;
-
-EXPORT_SYMBOL(kmap_prot);
-EXPORT_SYMBOL(kmap_pte);
-#endif
-
-void MMU_init(void);
-void set_phys_avail(unsigned long total_ram);
-
-/* XXX should be in current.h  -- paulus */
-extern struct task_struct *current_set[NR_CPUS];
-
-char *klimit = _end;
-struct mem_pieces phys_avail;
-
-/*
- * this tells the system to map all of ram with the segregs
- * (i.e. page tables) instead of the bats.
- * -- Cort
- */
-int __map_without_bats;
-int __map_without_ltlbs;
-
-/* max amount of RAM to use */
-unsigned long __max_memory;
-/* max amount of low RAM to map in */
-unsigned long __max_low_memory = MAX_LOW_MEM;
-
-void show_mem(void)
-{
-	int i,free = 0,total = 0,reserved = 0;
-	int shared = 0, cached = 0;
-	int highmem = 0;
-
-	printk("Mem-info:\n");
-	show_free_areas();
-	i = max_mapnr;
-	while (i-- > 0) {
-		total++;
-		if (PageHighMem(mem_map+i))
-			highmem++;
-		if (PageReserved(mem_map+i))
-			reserved++;
-		else if (PageSwapCache(mem_map+i))
-			cached++;
-		else if (!page_count(mem_map+i))
-			free++;
-		else
-			shared += page_count(mem_map+i) - 1;
-	}
-	printk("%d pages of RAM\n",total);
-	printk("%d pages of HIGHMEM\n", highmem);
-	printk("%d free pages\n",free);
-	printk("%d reserved pages\n",reserved);
-	printk("%d pages shared\n",shared);
-	printk("%d pages swap cached\n",cached);
-}
-
-/* Free up now-unused memory */
-static void free_sec(unsigned long start, unsigned long end, const char *name)
-{
-	unsigned long cnt = 0;
-
-	while (start < end) {
-		ClearPageReserved(virt_to_page(start));
-		init_page_count(virt_to_page(start));
-		free_page(start);
-		cnt++;
-		start += PAGE_SIZE;
- 	}
-	if (cnt) {
-		printk(" %ldk %s", cnt << (PAGE_SHIFT - 10), name);
-		totalram_pages += cnt;
-	}
-}
-
-void free_initmem(void)
-{
-#define FREESEC(TYPE) \
-	free_sec((unsigned long)(&__ ## TYPE ## _begin), \
-		 (unsigned long)(&__ ## TYPE ## _end), \
-		 #TYPE);
-
-	printk ("Freeing unused kernel memory:");
-	FREESEC(init);
- 	printk("\n");
-	ppc_md.progress = NULL;
-#undef FREESEC
-}
-
-#ifdef CONFIG_BLK_DEV_INITRD
-void free_initrd_mem(unsigned long start, unsigned long end)
-{
-	printk ("Freeing initrd memory: %ldk freed\n", (end - start) >> 10);
-
-	for (; start < end; start += PAGE_SIZE) {
-		ClearPageReserved(virt_to_page(start));
-		init_page_count(virt_to_page(start));
-		free_page(start);
-		totalram_pages++;
-	}
-}
-#endif
-
-/*
- * Check for command-line options that affect what MMU_init will do.
- */
-void MMU_setup(void)
-{
-	/* Check for nobats option (used in mapin_ram). */
-	if (strstr(cmd_line, "nobats")) {
-		__map_without_bats = 1;
-	}
-
-	if (strstr(cmd_line, "noltlbs")) {
-		__map_without_ltlbs = 1;
-	}
-
-	/* Look for mem= option on command line */
-	if (strstr(cmd_line, "mem=")) {
-		char *p, *q;
-		unsigned long maxmem = 0;
-
-		for (q = cmd_line; (p = strstr(q, "mem=")) != 0; ) {
-			q = p + 4;
-			if (p > cmd_line && p[-1] != ' ')
-				continue;
-			maxmem = simple_strtoul(q, &q, 0);
-			if (*q == 'k' || *q == 'K') {
-				maxmem <<= 10;
-				++q;
-			} else if (*q == 'm' || *q == 'M') {
-				maxmem <<= 20;
-				++q;
-			}
-		}
-		__max_memory = maxmem;
-	}
-}
-
-/*
- * MMU_init sets up the basic memory mappings for the kernel,
- * including both RAM and possibly some I/O regions,
- * and sets up the page tables and the MMU hardware ready to go.
- */
-void __init MMU_init(void)
-{
-	if (ppc_md.progress)
-		ppc_md.progress("MMU:enter", 0x111);
-
-	/* parse args from command line */
-	MMU_setup();
-
-	/*
-	 * Figure out how much memory we have, how much
-	 * is lowmem, and how much is highmem.  If we were
-	 * passed the total memory size from the bootloader,
-	 * just use it.
-	 */
-	if (boot_mem_size)
-		total_memory = boot_mem_size;
-	else
-		total_memory = ppc_md.find_end_of_memory();
-
-	if (__max_memory && total_memory > __max_memory)
-		total_memory = __max_memory;
-	total_lowmem = total_memory;
-	if (total_lowmem > __max_low_memory) {
-		total_lowmem = __max_low_memory;
-#ifndef CONFIG_HIGHMEM
-		total_memory = total_lowmem;
-#endif /* CONFIG_HIGHMEM */
-	}
-	set_phys_avail(total_lowmem);
-
-	/* Initialize the MMU hardware */
-	if (ppc_md.progress)
-		ppc_md.progress("MMU:hw init", 0x300);
-	MMU_init_hw();
-
-	/* Map in all of RAM starting at KERNELBASE */
-	if (ppc_md.progress)
-		ppc_md.progress("MMU:mapin", 0x301);
-	mapin_ram();
-
-#ifdef CONFIG_HIGHMEM
-	ioremap_base = PKMAP_BASE;
-#else
-	ioremap_base = 0xfe000000UL;	/* for now, could be 0xfffff000 */
-#endif /* CONFIG_HIGHMEM */
-	ioremap_bot = ioremap_base;
-
-	/* Map in I/O resources */
-	if (ppc_md.progress)
-		ppc_md.progress("MMU:setio", 0x302);
-	if (ppc_md.setup_io_mappings)
-		ppc_md.setup_io_mappings();
-
-	/* Initialize the context management stuff */
-	mmu_context_init();
-
-	if (ppc_md.progress)
-		ppc_md.progress("MMU:exit", 0x211);
-
-#ifdef CONFIG_BOOTX_TEXT
-	/* By default, we are no longer mapped */
-       	boot_text_mapped = 0;
-	/* Must be done last, or ppc_md.progress will die. */
-	map_boot_text();
-#endif
-}
-
-/* This is only called until mem_init is done. */
-void __init *early_get_page(void)
-{
-	void *p;
-
-	if (init_bootmem_done) {
-		p = alloc_bootmem_pages(PAGE_SIZE);
-	} else {
-		p = mem_pieces_find(PAGE_SIZE, PAGE_SIZE);
-	}
-	return p;
-}
-
-/*
- * Initialize the bootmem system and give it all the memory we
- * have available.
- */
-void __init do_init_bootmem(void)
-{
-	unsigned long start, size;
-	int i;
-
-	/*
-	 * Find an area to use for the bootmem bitmap.
-	 * We look for the first area which is at least
-	 * 128kB in length (128kB is enough for a bitmap
-	 * for 4GB of memory, using 4kB pages), plus 1 page
-	 * (in case the address isn't page-aligned).
-	 */
-	start = 0;
-	size = 0;
-	for (i = 0; i < phys_avail.n_regions; ++i) {
-		unsigned long a = phys_avail.regions[i].address;
-		unsigned long s = phys_avail.regions[i].size;
-		if (s <= size)
-			continue;
-		start = a;
-		size = s;
-		if (s >= 33 * PAGE_SIZE)
-			break;
-	}
-	start = PAGE_ALIGN(start);
-
-	min_low_pfn = start >> PAGE_SHIFT;
-	max_low_pfn = (PPC_MEMSTART + total_lowmem) >> PAGE_SHIFT;
-	max_pfn = (PPC_MEMSTART + total_memory) >> PAGE_SHIFT;
-	boot_mapsize = init_bootmem_node(&contig_page_data, min_low_pfn,
-					 PPC_MEMSTART >> PAGE_SHIFT,
-					 max_low_pfn);
-
-	/* remove the bootmem bitmap from the available memory */
-	mem_pieces_remove(&phys_avail, start, boot_mapsize, 1);
-
-	/* add everything in phys_avail into the bootmem map */
-	for (i = 0; i < phys_avail.n_regions; ++i)
-		free_bootmem(phys_avail.regions[i].address,
-			     phys_avail.regions[i].size);
-
-	init_bootmem_done = 1;
-}
-
-/*
- * paging_init() sets up the page tables - in fact we've already done this.
- */
-void __init paging_init(void)
-{
-	unsigned long start_pfn, end_pfn;
-	unsigned long max_zone_pfns[MAX_NR_ZONES];
-#ifdef CONFIG_HIGHMEM
-	map_page(PKMAP_BASE, 0, 0);	/* XXX gross */
-	pkmap_page_table = pte_offset_kernel(pmd_offset(pgd_offset_k
-			(PKMAP_BASE), PKMAP_BASE), PKMAP_BASE);
-	map_page(KMAP_FIX_BEGIN, 0, 0);	/* XXX gross */
-	kmap_pte = pte_offset_kernel(pmd_offset(pgd_offset_k
-			(KMAP_FIX_BEGIN), KMAP_FIX_BEGIN), KMAP_FIX_BEGIN);
-	kmap_prot = PAGE_KERNEL;
-#endif /* CONFIG_HIGHMEM */
-	/* All pages are DMA-able so we put them all in the DMA zone. */
-	start_pfn = __pa(PAGE_OFFSET) >> PAGE_SHIFT;
-	end_pfn = start_pfn + (total_memory >> PAGE_SHIFT);
-	add_active_range(0, start_pfn, end_pfn);
-
-	memset(max_zone_pfns, 0, sizeof(max_zone_pfns));
-#ifdef CONFIG_HIGHMEM
-	max_zone_pfns[ZONE_DMA] = total_lowmem >> PAGE_SHIFT;
-	max_zone_pfns[ZONE_HIGHMEM] = total_memory >> PAGE_SHIFT;
-#else
-	max_zone_pfns[ZONE_DMA] = total_memory >> PAGE_SHIFT;
-#endif /* CONFIG_HIGHMEM */
-	free_area_init_nodes(max_zone_pfns);
-}
-
-void __init mem_init(void)
-{
-	unsigned long addr;
-	int codepages = 0;
-	int datapages = 0;
-	int initpages = 0;
-#ifdef CONFIG_HIGHMEM
-	unsigned long highmem_mapnr;
-
-	highmem_mapnr = total_lowmem >> PAGE_SHIFT;
-#endif /* CONFIG_HIGHMEM */
-	max_mapnr = total_memory >> PAGE_SHIFT;
-
-	high_memory = (void *) __va(PPC_MEMSTART + total_lowmem);
-	num_physpages = max_mapnr;	/* RAM is assumed contiguous */
-
-	totalram_pages += free_all_bootmem();
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	/* if we are booted from BootX with an initial ramdisk,
-	   make sure the ramdisk pages aren't reserved. */
-	if (initrd_start) {
-		for (addr = initrd_start; addr < initrd_end; addr += PAGE_SIZE)
-			ClearPageReserved(virt_to_page(addr));
-	}
-#endif /* CONFIG_BLK_DEV_INITRD */
-
-	for (addr = PAGE_OFFSET; addr < (unsigned long)high_memory;
-	     addr += PAGE_SIZE) {
-		if (!PageReserved(virt_to_page(addr)))
-			continue;
-		if (addr < (ulong) etext)
-			codepages++;
-		else if (addr >= (unsigned long)&__init_begin
-			 && addr < (unsigned long)&__init_end)
-			initpages++;
-		else if (addr < (ulong) klimit)
-			datapages++;
-	}
-
-#ifdef CONFIG_HIGHMEM
-	{
-		unsigned long pfn;
-
-		for (pfn = highmem_mapnr; pfn < max_mapnr; ++pfn) {
-			struct page *page = mem_map + pfn;
-
-			ClearPageReserved(page);
-			init_page_count(page);
-			__free_page(page);
-			totalhigh_pages++;
-		}
-		totalram_pages += totalhigh_pages;
-	}
-#endif /* CONFIG_HIGHMEM */
-
-        printk("Memory: %luk available (%dk kernel code, %dk data, %dk init, %ldk highmem)\n",
-	       (unsigned long)nr_free_pages()<< (PAGE_SHIFT-10),
-	       codepages<< (PAGE_SHIFT-10), datapages<< (PAGE_SHIFT-10),
-	       initpages<< (PAGE_SHIFT-10),
-	       (unsigned long) (totalhigh_pages << (PAGE_SHIFT-10)));
-
-	mem_init_done = 1;
-}
-
-/*
- * Set phys_avail to the amount of physical memory,
- * less the kernel text/data/bss.
- */
-void __init
-set_phys_avail(unsigned long total_memory)
-{
-	unsigned long kstart, ksize;
-
-	/*
-	 * Initially, available physical memory is equivalent to all
-	 * physical memory.
-	 */
-
-	phys_avail.regions[0].address = PPC_MEMSTART;
-	phys_avail.regions[0].size = total_memory;
-	phys_avail.n_regions = 1;
-
-	/*
-	 * Map out the kernel text/data/bss from the available physical
-	 * memory.
-	 */
-
-	kstart = __pa(_stext);	/* should be 0 */
-	ksize = PAGE_ALIGN(klimit - _stext);
-
-	mem_pieces_remove(&phys_avail, kstart, ksize, 0);
-	mem_pieces_remove(&phys_avail, 0, 0x4000, 0);
-
-#if defined(CONFIG_BLK_DEV_INITRD)
-	/* Remove the init RAM disk from the available memory. */
-	if (initrd_start) {
-		mem_pieces_remove(&phys_avail, __pa(initrd_start),
-				  initrd_end - initrd_start, 1);
-	}
-#endif /* CONFIG_BLK_DEV_INITRD */
-}
-
-/* Mark some memory as reserved by removing it from phys_avail. */
-void __init reserve_phys_mem(unsigned long start, unsigned long size)
-{
-	mem_pieces_remove(&phys_avail, start, size, 1);
-}
-
-/*
- * This is called when a page has been modified by the kernel.
- * It just marks the page as not i-cache clean.  We do the i-cache
- * flush later when the page is given to a user process, if necessary.
- */
-void flush_dcache_page(struct page *page)
-{
-	clear_bit(PG_arch_1, &page->flags);
-}
-
-void flush_dcache_icache_page(struct page *page)
-{
-#ifdef CONFIG_BOOKE
-	void *start = kmap_atomic(page, KM_PPC_SYNC_ICACHE);
-	__flush_dcache_icache(start);
-	kunmap_atomic(start, KM_PPC_SYNC_ICACHE);
-#elif defined(CONFIG_8xx)
-	/* On 8xx there is no need to kmap since highmem is not supported */
-	__flush_dcache_icache(page_address(page)); 
-#else
-	__flush_dcache_icache_phys(page_to_pfn(page) << PAGE_SHIFT);
-#endif
-
-}
-void clear_user_page(void *page, unsigned long vaddr, struct page *pg)
-{
-	clear_page(page);
-	clear_bit(PG_arch_1, &pg->flags);
-}
-
-void copy_user_page(void *vto, void *vfrom, unsigned long vaddr,
-		    struct page *pg)
-{
-	copy_page(vto, vfrom);
-	clear_bit(PG_arch_1, &pg->flags);
-}
-
-void flush_icache_user_range(struct vm_area_struct *vma, struct page *page,
-			     unsigned long addr, int len)
-{
-	unsigned long maddr;
-
-	maddr = (unsigned long) kmap(page) + (addr & ~PAGE_MASK);
-	flush_icache_range(maddr, maddr + len);
-	kunmap(page);
-}
-
-/*
- * This is called at the end of handling a user page fault, when the
- * fault has been handled by updating a PTE in the linux page tables.
- * We use it to preload an HPTE into the hash table corresponding to
- * the updated linux PTE.
- */
-void update_mmu_cache(struct vm_area_struct *vma, unsigned long address,
-		      pte_t pte)
-{
-	/* handle i-cache coherency */
-	unsigned long pfn = pte_pfn(pte);
-
-	if (pfn_valid(pfn)) {
-		struct page *page = pfn_to_page(pfn);
-#ifdef CONFIG_8xx
-		/* On 8xx, the TLB handlers work in 2 stages:
-	 	 * First, a zeroed entry is loaded by TLBMiss handler,
-		 * which causes the TLBError handler to be triggered.
-		 * That means the zeroed TLB has to be invalidated
-		 * whenever a page miss occurs.
-		 */
-		_tlbie(address, 0 /* 8xx doesn't care about PID */);
-#endif
-		if (!PageReserved(page)
-		    && !test_bit(PG_arch_1, &page->flags)) {
-			if (vma->vm_mm == current->active_mm)
-				__flush_dcache_icache((void *) address);
-			else
-				flush_dcache_icache_page(page);
-			set_bit(PG_arch_1, &page->flags);
-		}
-	}
-
-#ifdef CONFIG_PPC_STD_MMU
-	/* We only want HPTEs for linux PTEs that have _PAGE_ACCESSED set */
-	if (Hash != 0 && pte_young(pte)) {
-		struct mm_struct *mm;
-		pmd_t *pmd;
-
-		mm = (address < TASK_SIZE)? vma->vm_mm: &init_mm;
-		pmd = pmd_offset(pgd_offset(mm, address), address);
-		if (!pmd_none(*pmd))
-			add_hash_page(mm->context.id, address, pmd_val(*pmd));
-	}
-#endif
-}
-
-/*
- * This is called by /dev/mem to know if a given address has to
- * be mapped non-cacheable or not
- */
-int page_is_ram(unsigned long pfn)
-{
-	return pfn < max_pfn;
-}
-
-pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
-			      unsigned long size, pgprot_t vma_prot)
-{
-	if (ppc_md.phys_mem_access_prot)
-		return ppc_md.phys_mem_access_prot(file, pfn, size, vma_prot);
-
-	if (!page_is_ram(pfn))
-		vma_prot = __pgprot(pgprot_val(vma_prot)
-				    | _PAGE_GUARDED | _PAGE_NO_CACHE);
-	return vma_prot;
-}
-EXPORT_SYMBOL(phys_mem_access_prot);
diff --git a/arch/ppc/mm/mem_pieces.c b/arch/ppc/mm/mem_pieces.c
deleted file mode 100644
index 6030a0ddfbb..00000000000
--- a/arch/ppc/mm/mem_pieces.c
+++ /dev/null
@@ -1,162 +0,0 @@
-/*
- *    Copyright (c) 1996 Paul Mackerras <paulus@cs.anu.edu.au>
- *      Changes to accommodate Power Macintoshes.
- *    Cort Dougan <cort@cs.nmt.edu>
- *      Rewrites.
- *    Grant Erickson <grant@lcse.umn.edu>
- *      General rework and split from mm/init.c.
- *
- *    Module name: mem_pieces.c
- *
- *    Description:
- *      Routines and data structures for manipulating and representing
- *      phyiscal memory extents (i.e. address/length pairs).
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/stddef.h>
-#include <linux/init.h>
-#include <asm/page.h>
-
-#include "mem_pieces.h"
-
-extern struct mem_pieces phys_avail;
-
-static void mem_pieces_print(struct mem_pieces *);
-
-/*
- * Scan a region for a piece of a given size with the required alignment.
- */
-void __init *
-mem_pieces_find(unsigned int size, unsigned int align)
-{
-	int i;
-	unsigned a, e;
-	struct mem_pieces *mp = &phys_avail;
-
-	for (i = 0; i < mp->n_regions; ++i) {
-		a = mp->regions[i].address;
-		e = a + mp->regions[i].size;
-		a = (a + align - 1) & -align;
-		if (a + size <= e) {
-			mem_pieces_remove(mp, a, size, 1);
-			return (void *) __va(a);
-		}
-	}
-	panic("Couldn't find %u bytes at %u alignment\n", size, align);
-
-	return NULL;
-}
-
-/*
- * Remove some memory from an array of pieces
- */
-void __init
-mem_pieces_remove(struct mem_pieces *mp, unsigned int start, unsigned int size,
-		  int must_exist)
-{
-	int i, j;
-	unsigned int end, rs, re;
-	struct reg_property *rp;
-
-	end = start + size;
-	for (i = 0, rp = mp->regions; i < mp->n_regions; ++i, ++rp) {
-		if (end > rp->address && start < rp->address + rp->size)
-			break;
-	}
-	if (i >= mp->n_regions) {
-		if (must_exist)
-			printk("mem_pieces_remove: [%x,%x) not in any region\n",
-			       start, end);
-		return;
-	}
-	for (; i < mp->n_regions && end > rp->address; ++i, ++rp) {
-		rs = rp->address;
-		re = rs + rp->size;
-		if (must_exist && (start < rs || end > re)) {
-			printk("mem_pieces_remove: bad overlap [%x,%x) with",
-			       start, end);
-			mem_pieces_print(mp);
-			must_exist = 0;
-		}
-		if (start > rs) {
-			rp->size = start - rs;
-			if (end < re) {
-				/* need to split this entry */
-				if (mp->n_regions >= MEM_PIECES_MAX)
-					panic("eek... mem_pieces overflow");
-				for (j = mp->n_regions; j > i + 1; --j)
-					mp->regions[j] = mp->regions[j-1];
-				++mp->n_regions;
-				rp[1].address = end;
-				rp[1].size = re - end;
-			}
-		} else {
-			if (end < re) {
-				rp->address = end;
-				rp->size = re - end;
-			} else {
-				/* need to delete this entry */
-				for (j = i; j < mp->n_regions - 1; ++j)
-					mp->regions[j] = mp->regions[j+1];
-				--mp->n_regions;
-				--i;
-				--rp;
-			}
-		}
-	}
-}
-
-static void __init
-mem_pieces_print(struct mem_pieces *mp)
-{
-	int i;
-
-	for (i = 0; i < mp->n_regions; ++i)
-		printk(" [%x, %x)", mp->regions[i].address,
-		       mp->regions[i].address + mp->regions[i].size);
-	printk("\n");
-}
-
-void __init
-mem_pieces_sort(struct mem_pieces *mp)
-{
-	unsigned long a, s;
-	int i, j;
-
-	for (i = 1; i < mp->n_regions; ++i) {
-		a = mp->regions[i].address;
-		s = mp->regions[i].size;
-		for (j = i - 1; j >= 0; --j) {
-			if (a >= mp->regions[j].address)
-				break;
-			mp->regions[j+1] = mp->regions[j];
-		}
-		mp->regions[j+1].address = a;
-		mp->regions[j+1].size = s;
-	}
-}
-
-void __init
-mem_pieces_coalesce(struct mem_pieces *mp)
-{
-	unsigned long a, s, ns;
-	int i, j, d;
-
-	d = 0;
-	for (i = 0; i < mp->n_regions; i = j) {
-		a = mp->regions[i].address;
-		s = mp->regions[i].size;
-		for (j = i + 1; j < mp->n_regions
-			     && mp->regions[j].address - a <= s; ++j) {
-			ns = mp->regions[j].address + mp->regions[j].size - a;
-			if (ns > s)
-				s = ns;
-		}
-		mp->regions[d].address = a;
-		mp->regions[d].size = s;
-		++d;
-	}
-	mp->n_regions = d;
-}
diff --git a/arch/ppc/mm/mem_pieces.h b/arch/ppc/mm/mem_pieces.h
deleted file mode 100644
index e2b700dc7f1..00000000000
--- a/arch/ppc/mm/mem_pieces.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- *    Copyright (c) 1996 Paul Mackerras <paulus@cs.anu.edu.au>
- *      Changes to accommodate Power Macintoshes.
- *    Cort Dougan <cort@cs.nmt.edu>
- *      Rewrites.
- *    Grant Erickson <grant@lcse.umn.edu>
- *      General rework and split from mm/init.c.
- *
- *    Module name: mem_pieces.h
- *
- *    Description:
- *      Routines and data structures for manipulating and representing
- *      phyiscal memory extents (i.e. address/length pairs).
- *
- */
-
-#ifndef __MEM_PIECES_H__
-#define	__MEM_PIECES_H__
-
-#include <asm/prom.h>
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-
-/* Type Definitions */
-
-#define	MEM_PIECES_MAX	32
-
-struct mem_pieces {
-    int n_regions;
-    struct reg_property regions[MEM_PIECES_MAX];
-};
-
-/* Function Prototypes */
-
-extern void	*mem_pieces_find(unsigned int size, unsigned int align);
-extern void	 mem_pieces_remove(struct mem_pieces *mp, unsigned int start,
-				   unsigned int size, int must_exist);
-extern void	 mem_pieces_coalesce(struct mem_pieces *mp);
-extern void	 mem_pieces_sort(struct mem_pieces *mp);
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __MEM_PIECES_H__ */
diff --git a/arch/ppc/mm/mmu_context.c b/arch/ppc/mm/mmu_context.c
deleted file mode 100644
index dacf45ced47..00000000000
--- a/arch/ppc/mm/mmu_context.c
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- * This file contains the routines for handling the MMU on those
- * PowerPC implementations where the MMU substantially follows the
- * architecture specification.  This includes the 6xx, 7xx, 7xxx,
- * and 8260 implementations but excludes the 8xx and 4xx.
- *  -- paulus
- *
- *  Derived from arch/ppc/mm/init.c:
- *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *
- *  Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au)
- *  and Cort Dougan (PReP) (cort@cs.nmt.edu)
- *    Copyright (C) 1996 Paul Mackerras
- *  Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk).
- *
- *  Derived from "arch/i386/mm/init.c"
- *    Copyright (C) 1991, 1992, 1993, 1994  Linus Torvalds
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- *
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-
-#include <asm/mmu_context.h>
-#include <asm/tlbflush.h>
-
-unsigned long next_mmu_context;
-unsigned long context_map[LAST_CONTEXT / BITS_PER_LONG + 1];
-#ifdef FEW_CONTEXTS
-atomic_t nr_free_contexts;
-struct mm_struct *context_mm[LAST_CONTEXT+1];
-void steal_context(void);
-#endif /* FEW_CONTEXTS */
-
-/*
- * Initialize the context management stuff.
- */
-void __init
-mmu_context_init(void)
-{
-	/*
-	 * Some processors have too few contexts to reserve one for
-	 * init_mm, and require using context 0 for a normal task.
-	 * Other processors reserve the use of context zero for the kernel.
-	 * This code assumes FIRST_CONTEXT < 32.
-	 */
-	context_map[0] = (1 << FIRST_CONTEXT) - 1;
-	next_mmu_context = FIRST_CONTEXT;
-#ifdef FEW_CONTEXTS
-	atomic_set(&nr_free_contexts, LAST_CONTEXT - FIRST_CONTEXT + 1);
-#endif /* FEW_CONTEXTS */
-}
-
-#ifdef FEW_CONTEXTS
-/*
- * Steal a context from a task that has one at the moment.
- * This is only used on 8xx and 4xx and we presently assume that
- * they don't do SMP.  If they do then this will have to check
- * whether the MM we steal is in use.
- * We also assume that this is only used on systems that don't
- * use an MMU hash table - this is true for 8xx and 4xx.
- * This isn't an LRU system, it just frees up each context in
- * turn (sort-of pseudo-random replacement :).  This would be the
- * place to implement an LRU scheme if anyone was motivated to do it.
- *  -- paulus
- */
-void
-steal_context(void)
-{
-	struct mm_struct *mm;
-
-	/* free up context `next_mmu_context' */
-	/* if we shouldn't free context 0, don't... */
-	if (next_mmu_context < FIRST_CONTEXT)
-		next_mmu_context = FIRST_CONTEXT;
-	mm = context_mm[next_mmu_context];
-	flush_tlb_mm(mm);
-	destroy_context(mm);
-}
-#endif /* FEW_CONTEXTS */
diff --git a/arch/ppc/mm/mmu_decl.h b/arch/ppc/mm/mmu_decl.h
deleted file mode 100644
index 5f813e386b8..00000000000
--- a/arch/ppc/mm/mmu_decl.h
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- * Declarations of procedures and variables shared between files
- * in arch/ppc/mm/.
- *
- *  Derived from arch/ppc/mm/init.c:
- *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *
- *  Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au)
- *  and Cort Dougan (PReP) (cort@cs.nmt.edu)
- *    Copyright (C) 1996 Paul Mackerras
- *  Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk).
- *
- *  Derived from "arch/i386/mm/init.c"
- *    Copyright (C) 1991, 1992, 1993, 1994  Linus Torvalds
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- *
- */
-#include <asm/tlbflush.h>
-#include <asm/mmu.h>
-
-extern void mapin_ram(void);
-extern int map_page(unsigned long va, phys_addr_t pa, int flags);
-extern void setbat(int index, unsigned long virt, unsigned long phys,
-		   unsigned int size, int flags);
-extern void reserve_phys_mem(unsigned long start, unsigned long size);
-extern void settlbcam(int index, unsigned long virt, phys_addr_t phys,
-		      unsigned int size, int flags, unsigned int pid);
-extern void invalidate_tlbcam_entry(int index);
-
-extern int __map_without_bats;
-extern unsigned long ioremap_base;
-extern unsigned long ioremap_bot;
-extern unsigned int rtas_data, rtas_size;
-
-extern unsigned long total_memory;
-extern unsigned long total_lowmem;
-extern int mem_init_done;
-
-extern PTE *Hash, *Hash_end;
-extern unsigned long Hash_size, Hash_mask;
-
-extern unsigned int num_tlbcam_entries;
-
-/* ...and now those things that may be slightly different between processor
- * architectures.  -- Dan
- */
-#if defined(CONFIG_8xx)
-#define flush_HPTE(X, va, pg)	_tlbie(va, 0 /* 8xx doesn't care about PID */)
-#define MMU_init_hw()		do { } while(0)
-#define mmu_mapin_ram()		(0UL)
-
-#elif defined(CONFIG_4xx)
-#define flush_HPTE(pid, va, pg)	_tlbie(va, pid)
-extern void MMU_init_hw(void);
-extern unsigned long mmu_mapin_ram(void);
-
-#else
-/* anything except 4xx or 8xx */
-extern void MMU_init_hw(void);
-extern unsigned long mmu_mapin_ram(void);
-
-/* Be careful....this needs to be updated if we ever encounter 603 SMPs,
- * which includes all new 82xx processors.  We need tlbie/tlbsync here
- * in that case (I think). -- Dan.
- */
-static inline void flush_HPTE(unsigned context, unsigned long va,
-			      unsigned long pdval)
-{
-	if ((Hash != 0) &&
-	    cpu_has_feature(CPU_FTR_HPTE_TABLE))
-		flush_hash_pages(0, va, pdval, 1);
-	else
-		_tlbie(va);
-}
-#endif
diff --git a/arch/ppc/mm/pgtable.c b/arch/ppc/mm/pgtable.c
deleted file mode 100644
index 03a79bff127..00000000000
--- a/arch/ppc/mm/pgtable.c
+++ /dev/null
@@ -1,403 +0,0 @@
-/*
- * This file contains the routines setting up the linux page tables.
- *  -- paulus
- *
- *  Derived from arch/ppc/mm/init.c:
- *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *
- *  Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au)
- *  and Cort Dougan (PReP) (cort@cs.nmt.edu)
- *    Copyright (C) 1996 Paul Mackerras
- *  Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk).
- *
- *  Derived from "arch/i386/mm/init.c"
- *    Copyright (C) 1991, 1992, 1993, 1994  Linus Torvalds
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/vmalloc.h>
-#include <linux/init.h>
-#include <linux/highmem.h>
-
-#include <asm/pgtable.h>
-#include <asm/pgalloc.h>
-#include <asm/io.h>
-
-#include "mmu_decl.h"
-
-unsigned long ioremap_base;
-unsigned long ioremap_bot;
-int io_bat_index;
-
-#if defined(CONFIG_6xx)
-#define HAVE_BATS	1
-#endif
-
-extern char etext[], _stext[];
-
-#ifdef CONFIG_SMP
-extern void hash_page_sync(void);
-#endif
-
-#ifdef HAVE_BATS
-extern unsigned long v_mapped_by_bats(unsigned long va);
-extern unsigned long p_mapped_by_bats(unsigned long pa);
-void setbat(int index, unsigned long virt, unsigned long phys,
-	    unsigned int size, int flags);
-
-#else /* !HAVE_BATS */
-#define v_mapped_by_bats(x)	(0UL)
-#define p_mapped_by_bats(x)	(0UL)
-#endif /* HAVE_BATS */
-
-#ifdef CONFIG_PTE_64BIT
-/* 44x uses an 8kB pgdir because it has 8-byte Linux PTEs. */
-#define PGDIR_ORDER	1
-#else
-#define PGDIR_ORDER	0
-#endif
-
-pgd_t *pgd_alloc(struct mm_struct *mm)
-{
-	pgd_t *ret;
-
-	ret = (pgd_t *)__get_free_pages(GFP_KERNEL|__GFP_ZERO, PGDIR_ORDER);
-	return ret;
-}
-
-void pgd_free(struct mm_struct *mm, pgd_t *pgd)
-{
-	free_pages((unsigned long)pgd, PGDIR_ORDER);
-}
-
-__init_refok pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long address)
-{
-	pte_t *pte;
-	extern int mem_init_done;
-	extern void *early_get_page(void);
-
-	if (mem_init_done) {
-		pte = (pte_t *)__get_free_page(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO);
-	} else {
-		pte = (pte_t *)early_get_page();
-		if (pte)
-			clear_page(pte);
-	}
-	return pte;
-}
-
-pgtable_t pte_alloc_one(struct mm_struct *mm, unsigned long address)
-{
-	struct page *ptepage;
-
-#ifdef CONFIG_HIGHPTE
-	gfp_t flags = GFP_KERNEL | __GFP_HIGHMEM | __GFP_REPEAT;
-#else
-	gfp_t flags = GFP_KERNEL | __GFP_REPEAT;
-#endif
-
-	ptepage = alloc_pages(flags, 0);
-	if (ptepage) {
-		clear_highpage(ptepage);
-		pgtable_page_ctor(ptepage);
-	}
-	return ptepage;
-}
-
-void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
-{
-#ifdef CONFIG_SMP
-	hash_page_sync();
-#endif
-	free_page((unsigned long)pte);
-}
-
-void pte_free(struct mm_struct *mm, pgtable_t ptepage)
-{
-#ifdef CONFIG_SMP
-	hash_page_sync();
-#endif
-	pgtable_page_dtor(ptepage);
-	__free_page(ptepage);
-}
-
-#ifndef CONFIG_PHYS_64BIT
-void __iomem *
-ioremap(phys_addr_t addr, unsigned long size)
-{
-	return __ioremap(addr, size, _PAGE_NO_CACHE);
-}
-#else /* CONFIG_PHYS_64BIT */
-void __iomem *
-ioremap64(unsigned long long addr, unsigned long size)
-{
-	return __ioremap(addr, size, _PAGE_NO_CACHE);
-}
-
-void __iomem *
-ioremap(phys_addr_t addr, unsigned long size)
-{
-	phys_addr_t addr64 = fixup_bigphys_addr(addr, size);
-
-	return ioremap64(addr64, size);
-}
-#endif /* CONFIG_PHYS_64BIT */
-
-void __iomem *
-__ioremap(phys_addr_t addr, unsigned long size, unsigned long flags)
-{
-	unsigned long v, i;
-	phys_addr_t p;
-	int err;
-
-	/*
-	 * Choose an address to map it to.
-	 * Once the vmalloc system is running, we use it.
-	 * Before then, we use space going down from ioremap_base
-	 * (ioremap_bot records where we're up to).
-	 */
-	p = addr & PAGE_MASK;
-	size = PAGE_ALIGN(addr + size) - p;
-
-	/*
-	 * If the address lies within the first 16 MB, assume it's in ISA
-	 * memory space
-	 */
-	if (p < 16*1024*1024)
-		p += _ISA_MEM_BASE;
-
-	/*
-	 * Don't allow anybody to remap normal RAM that we're using.
-	 * mem_init() sets high_memory so only do the check after that.
-	 */
-	if ( mem_init_done && (p < virt_to_phys(high_memory)) )
-	{
-		printk("__ioremap(): phys addr "PHYS_FMT" is RAM lr %p\n", p,
-		       __builtin_return_address(0));
-		return NULL;
-	}
-
-	if (size == 0)
-		return NULL;
-
-	/*
-	 * Is it already mapped?  Perhaps overlapped by a previous
-	 * BAT mapping.  If the whole area is mapped then we're done,
-	 * otherwise remap it since we want to keep the virt addrs for
-	 * each request contiguous.
-	 *
-	 * We make the assumption here that if the bottom and top
-	 * of the range we want are mapped then it's mapped to the
-	 * same virt address (and this is contiguous).
-	 *  -- Cort
-	 */
-	if ((v = p_mapped_by_bats(p)) /*&& p_mapped_by_bats(p+size-1)*/ )
-		goto out;
-
-	if (mem_init_done) {
-		struct vm_struct *area;
-		area = get_vm_area(size, VM_IOREMAP);
-		if (area == 0)
-			return NULL;
-		v = (unsigned long) area->addr;
-	} else {
-		v = (ioremap_bot -= size);
-	}
-
-	if ((flags & _PAGE_PRESENT) == 0)
-		flags |= _PAGE_KERNEL;
-	if (flags & _PAGE_NO_CACHE)
-		flags |= _PAGE_GUARDED;
-
-	/*
-	 * Should check if it is a candidate for a BAT mapping
-	 */
-
-	err = 0;
-	for (i = 0; i < size && err == 0; i += PAGE_SIZE)
-		err = map_page(v+i, p+i, flags);
-	if (err) {
-		if (mem_init_done)
-			vunmap((void *)v);
-		return NULL;
-	}
-
-out:
-	return (void __iomem *) (v + ((unsigned long)addr & ~PAGE_MASK));
-}
-
-void iounmap(volatile void __iomem *addr)
-{
-	/*
-	 * If mapped by BATs then there is nothing to do.
-	 * Calling vfree() generates a benign warning.
-	 */
-	if (v_mapped_by_bats((unsigned long)addr)) return;
-
-	if (addr > high_memory && (unsigned long) addr < ioremap_bot)
-		vunmap((void *) (PAGE_MASK & (unsigned long)addr));
-}
-
-void __iomem *ioport_map(unsigned long port, unsigned int len)
-{
-	return (void __iomem *) (port + _IO_BASE);
-}
-
-void ioport_unmap(void __iomem *addr)
-{
-	/* Nothing to do */
-}
-EXPORT_SYMBOL(ioport_map);
-EXPORT_SYMBOL(ioport_unmap);
-
-int
-map_page(unsigned long va, phys_addr_t pa, int flags)
-{
-	pmd_t *pd;
-	pte_t *pg;
-	int err = -ENOMEM;
-
-	/* Use upper 10 bits of VA to index the first level map */
-	pd = pmd_offset(pgd_offset_k(va), va);
-	/* Use middle 10 bits of VA to index the second-level map */
-	pg = pte_alloc_kernel(pd, va);
-	if (pg != 0) {
-		err = 0;
-		set_pte_at(&init_mm, va, pg, pfn_pte(pa >> PAGE_SHIFT, __pgprot(flags)));
-		if (mem_init_done)
-			flush_HPTE(0, va, pmd_val(*pd));
-	}
-	return err;
-}
-
-/*
- * Map in all of physical memory starting at KERNELBASE.
- */
-void __init mapin_ram(void)
-{
-	unsigned long v, p, s, f;
-
-	s = mmu_mapin_ram();
-	v = KERNELBASE + s;
-	p = PPC_MEMSTART + s;
-	for (; s < total_lowmem; s += PAGE_SIZE) {
-		if ((char *) v >= _stext && (char *) v < etext)
-			f = _PAGE_RAM_TEXT;
-		else
-			f = _PAGE_RAM;
-		map_page(v, p, f);
-		v += PAGE_SIZE;
-		p += PAGE_SIZE;
-	}
-}
-
-/* is x a power of 4? */
-#define is_power_of_4(x)	is_power_of_2(x) && (ffs(x) & 1)
-
-/*
- * Set up a mapping for a block of I/O.
- * virt, phys, size must all be page-aligned.
- * This should only be called before ioremap is called.
- */
-void __init io_block_mapping(unsigned long virt, phys_addr_t phys,
-			     unsigned int size, int flags)
-{
-	int i;
-
-	if (virt > KERNELBASE && virt < ioremap_bot)
-		ioremap_bot = ioremap_base = virt;
-
-#ifdef HAVE_BATS
-	/*
-	 * Use a BAT for this if possible...
-	 */
-	if (io_bat_index < 2 && is_power_of_2(size)
-	    && (virt & (size - 1)) == 0 && (phys & (size - 1)) == 0) {
-		setbat(io_bat_index, virt, phys, size, flags);
-		++io_bat_index;
-		return;
-	}
-#endif /* HAVE_BATS */
-
-	/* No BATs available, put it in the page tables. */
-	for (i = 0; i < size; i += PAGE_SIZE)
-		map_page(virt + i, phys + i, flags);
-}
-
-/* Scan the real Linux page tables and return a PTE pointer for
- * a virtual address in a context.
- * Returns true (1) if PTE was found, zero otherwise.  The pointer to
- * the PTE pointer is unmodified if PTE is not found.
- */
-int
-get_pteptr(struct mm_struct *mm, unsigned long addr, pte_t **ptep, pmd_t **pmdp)
-{
-        pgd_t	*pgd;
-        pmd_t	*pmd;
-        pte_t	*pte;
-        int     retval = 0;
-
-        pgd = pgd_offset(mm, addr & PAGE_MASK);
-        if (pgd) {
-                pmd = pmd_offset(pgd, addr & PAGE_MASK);
-                if (pmd_present(*pmd)) {
-                        pte = pte_offset_map(pmd, addr & PAGE_MASK);
-                        if (pte) {
-				retval = 1;
-				*ptep = pte;
-				if (pmdp)
-					*pmdp = pmd;
-				/* XXX caller needs to do pte_unmap, yuck */
-                        }
-                }
-        }
-        return(retval);
-}
-
-/* Find physical address for this virtual address.  Normally used by
- * I/O functions, but anyone can call it.
- */
-unsigned long iopa(unsigned long addr)
-{
-	unsigned long pa;
-
-	/* I don't know why this won't work on PMacs or CHRP.  It
-	 * appears there is some bug, or there is some implicit
-	 * mapping done not properly represented by BATs or in page
-	 * tables.......I am actively working on resolving this, but
-	 * can't hold up other stuff.  -- Dan
-	 */
-	pte_t *pte;
-	struct mm_struct *mm;
-
-	/* Check the BATs */
-	pa = v_mapped_by_bats(addr);
-	if (pa)
-		return pa;
-
-	/* Allow mapping of user addresses (within the thread)
-	 * for DMA if necessary.
-	 */
-	if (addr < TASK_SIZE)
-		mm = current->mm;
-	else
-		mm = &init_mm;
-
-	pa = 0;
-	if (get_pteptr(mm, addr, &pte, NULL)) {
-		pa = (pte_val(*pte) & PAGE_MASK) | (addr & ~PAGE_MASK);
-		pte_unmap(pte);
-	}
-
-	return(pa);
-}
-
diff --git a/arch/ppc/mm/ppc_mmu.c b/arch/ppc/mm/ppc_mmu.c
deleted file mode 100644
index 0c1dc155996..00000000000
--- a/arch/ppc/mm/ppc_mmu.c
+++ /dev/null
@@ -1,269 +0,0 @@
-/*
- * This file contains the routines for handling the MMU on those
- * PowerPC implementations where the MMU substantially follows the
- * architecture specification.  This includes the 6xx, 7xx, 7xxx,
- * and 8260 implementations but excludes the 8xx and 4xx.
- *  -- paulus
- *
- *  Derived from arch/ppc/mm/init.c:
- *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *
- *  Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au)
- *  and Cort Dougan (PReP) (cort@cs.nmt.edu)
- *    Copyright (C) 1996 Paul Mackerras
- *  Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk).
- *
- *  Derived from "arch/i386/mm/init.c"
- *    Copyright (C) 1991, 1992, 1993, 1994  Linus Torvalds
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/highmem.h>
-
-#include <asm/prom.h>
-#include <asm/mmu.h>
-#include <asm/machdep.h>
-
-#include "mmu_decl.h"
-#include "mem_pieces.h"
-
-PTE *Hash, *Hash_end;
-unsigned long Hash_size, Hash_mask;
-unsigned long _SDR1;
-
-union ubat {			/* BAT register values to be loaded */
-	BAT	bat;
-	u32	word[2];
-} BATS[4][2];			/* 4 pairs of IBAT, DBAT */
-
-struct batrange {		/* stores address ranges mapped by BATs */
-	unsigned long start;
-	unsigned long limit;
-	unsigned long phys;
-} bat_addrs[4];
-
-/*
- * Return PA for this VA if it is mapped by a BAT, or 0
- */
-unsigned long v_mapped_by_bats(unsigned long va)
-{
-	int b;
-	for (b = 0; b < 4; ++b)
-		if (va >= bat_addrs[b].start && va < bat_addrs[b].limit)
-			return bat_addrs[b].phys + (va - bat_addrs[b].start);
-	return 0;
-}
-
-/*
- * Return VA for a given PA or 0 if not mapped
- */
-unsigned long p_mapped_by_bats(unsigned long pa)
-{
-	int b;
-	for (b = 0; b < 4; ++b)
-		if (pa >= bat_addrs[b].phys
-	    	    && pa < (bat_addrs[b].limit-bat_addrs[b].start)
-		              +bat_addrs[b].phys)
-			return bat_addrs[b].start+(pa-bat_addrs[b].phys);
-	return 0;
-}
-
-unsigned long __init mmu_mapin_ram(void)
-{
-	unsigned long tot, bl, done;
-	unsigned long max_size = (256<<20);
-	unsigned long align;
-
-	if (__map_without_bats)
-		return 0;
-
-	/* Set up BAT2 and if necessary BAT3 to cover RAM. */
-
-	/* Make sure we don't map a block larger than the
-	   smallest alignment of the physical address. */
-	/* alignment of PPC_MEMSTART */
-	align = ~(PPC_MEMSTART-1) & PPC_MEMSTART;
-	/* set BAT block size to MIN(max_size, align) */
-	if (align && align < max_size)
-		max_size = align;
-
-	tot = total_lowmem;
-	for (bl = 128<<10; bl < max_size; bl <<= 1) {
-		if (bl * 2 > tot)
-			break;
-	}
-
-	setbat(2, KERNELBASE, PPC_MEMSTART, bl, _PAGE_RAM);
-	done = (unsigned long)bat_addrs[2].limit - KERNELBASE + 1;
-	if ((done < tot) && !bat_addrs[3].limit) {
-		/* use BAT3 to cover a bit more */
-		tot -= done;
-		for (bl = 128<<10; bl < max_size; bl <<= 1)
-			if (bl * 2 > tot)
-				break;
-		setbat(3, KERNELBASE+done, PPC_MEMSTART+done, bl, _PAGE_RAM);
-		done = (unsigned long)bat_addrs[3].limit - KERNELBASE + 1;
-	}
-
-	return done;
-}
-
-/*
- * Set up one of the I/D BAT (block address translation) register pairs.
- * The parameters are not checked; in particular size must be a power
- * of 2 between 128k and 256M.
- */
-void __init setbat(int index, unsigned long virt, unsigned long phys,
-		   unsigned int size, int flags)
-{
-	unsigned int bl;
-	int wimgxpp;
-	union ubat *bat = BATS[index];
-
-	if (((flags & _PAGE_NO_CACHE) == 0) &&
-	    cpu_has_feature(CPU_FTR_NEED_COHERENT))
-		flags |= _PAGE_COHERENT;
-
-	bl = (size >> 17) - 1;
-	if (PVR_VER(mfspr(SPRN_PVR)) != 1) {
-		/* 603, 604, etc. */
-		/* Do DBAT first */
-		wimgxpp = flags & (_PAGE_WRITETHRU | _PAGE_NO_CACHE
-				   | _PAGE_COHERENT | _PAGE_GUARDED);
-		wimgxpp |= (flags & _PAGE_RW)? BPP_RW: BPP_RX;
-		bat[1].word[0] = virt | (bl << 2) | 2; /* Vs=1, Vp=0 */
-		bat[1].word[1] = phys | wimgxpp;
-#ifndef CONFIG_KGDB /* want user access for breakpoints */
-		if (flags & _PAGE_USER)
-#endif
-			bat[1].bat.batu.vp = 1;
-		if (flags & _PAGE_GUARDED) {
-			/* G bit must be zero in IBATs */
-			bat[0].word[0] = bat[0].word[1] = 0;
-		} else {
-			/* make IBAT same as DBAT */
-			bat[0] = bat[1];
-		}
-	} else {
-		/* 601 cpu */
-		if (bl > BL_8M)
-			bl = BL_8M;
-		wimgxpp = flags & (_PAGE_WRITETHRU | _PAGE_NO_CACHE
-				   | _PAGE_COHERENT);
-		wimgxpp |= (flags & _PAGE_RW)?
-			((flags & _PAGE_USER)? PP_RWRW: PP_RWXX): PP_RXRX;
-		bat->word[0] = virt | wimgxpp | 4;	/* Ks=0, Ku=1 */
-		bat->word[1] = phys | bl | 0x40;	/* V=1 */
-	}
-
-	bat_addrs[index].start = virt;
-	bat_addrs[index].limit = virt + ((bl + 1) << 17) - 1;
-	bat_addrs[index].phys = phys;
-}
-
-/*
- * Initialize the hash table and patch the instructions in hashtable.S.
- */
-void __init MMU_init_hw(void)
-{
-	unsigned int hmask, mb, mb2;
-	unsigned int n_hpteg, lg_n_hpteg;
-
-	extern unsigned int hash_page_patch_A[];
-	extern unsigned int hash_page_patch_B[], hash_page_patch_C[];
-	extern unsigned int hash_page[];
-	extern unsigned int flush_hash_patch_A[], flush_hash_patch_B[];
-
-	if (!cpu_has_feature(CPU_FTR_HPTE_TABLE)) {
-		/*
-		 * Put a blr (procedure return) instruction at the
-		 * start of hash_page, since we can still get DSI
-		 * exceptions on a 603.
-		 */
-		hash_page[0] = 0x4e800020;
-		flush_icache_range((unsigned long) &hash_page[0],
-				   (unsigned long) &hash_page[1]);
-		return;
-	}
-
-	if ( ppc_md.progress ) ppc_md.progress("hash:enter", 0x105);
-
-#define LG_HPTEG_SIZE	6		/* 64 bytes per HPTEG */
-#define SDR1_LOW_BITS	((n_hpteg - 1) >> 10)
-#define MIN_N_HPTEG	1024		/* min 64kB hash table */
-
-	/*
-	 * Allow 1 HPTE (1/8 HPTEG) for each page of memory.
-	 * This is less than the recommended amount, but then
-	 * Linux ain't AIX.
-	 */
-	n_hpteg = total_memory / (PAGE_SIZE * 8);
-	if (n_hpteg < MIN_N_HPTEG)
-		n_hpteg = MIN_N_HPTEG;
-	lg_n_hpteg = __ilog2(n_hpteg);
-	if (n_hpteg & (n_hpteg - 1)) {
-		++lg_n_hpteg;		/* round up if not power of 2 */
-		n_hpteg = 1 << lg_n_hpteg;
-	}
-	Hash_size = n_hpteg << LG_HPTEG_SIZE;
-
-	/*
-	 * Find some memory for the hash table.
-	 */
-	if ( ppc_md.progress ) ppc_md.progress("hash:find piece", 0x322);
-	Hash = mem_pieces_find(Hash_size, Hash_size);
-	cacheable_memzero(Hash, Hash_size);
-	_SDR1 = __pa(Hash) | SDR1_LOW_BITS;
-
-	Hash_end = (PTE *) ((unsigned long)Hash + Hash_size);
-
-	printk("Total memory = %ldMB; using %ldkB for hash table (at %p)\n",
-	       total_memory >> 20, Hash_size >> 10, Hash);
-
-
-	/*
-	 * Patch up the instructions in hashtable.S:create_hpte
-	 */
-	if ( ppc_md.progress ) ppc_md.progress("hash:patch", 0x345);
-	Hash_mask = n_hpteg - 1;
-	hmask = Hash_mask >> (16 - LG_HPTEG_SIZE);
-	mb2 = mb = 32 - LG_HPTEG_SIZE - lg_n_hpteg;
-	if (lg_n_hpteg > 16)
-		mb2 = 16 - LG_HPTEG_SIZE;
-
-	hash_page_patch_A[0] = (hash_page_patch_A[0] & ~0xffff)
-		| ((unsigned int)(Hash) >> 16);
-	hash_page_patch_A[1] = (hash_page_patch_A[1] & ~0x7c0) | (mb << 6);
-	hash_page_patch_A[2] = (hash_page_patch_A[2] & ~0x7c0) | (mb2 << 6);
-	hash_page_patch_B[0] = (hash_page_patch_B[0] & ~0xffff) | hmask;
-	hash_page_patch_C[0] = (hash_page_patch_C[0] & ~0xffff) | hmask;
-
-	/*
-	 * Ensure that the locations we've patched have been written
-	 * out from the data cache and invalidated in the instruction
-	 * cache, on those machines with split caches.
-	 */
-	flush_icache_range((unsigned long) &hash_page_patch_A[0],
-			   (unsigned long) &hash_page_patch_C[1]);
-
-	/*
-	 * Patch up the instructions in hashtable.S:flush_hash_page
-	 */
-	flush_hash_patch_A[0] = (flush_hash_patch_A[0] & ~0xffff)
-		| ((unsigned int)(Hash) >> 16);
-	flush_hash_patch_A[1] = (flush_hash_patch_A[1] & ~0x7c0) | (mb << 6);
-	flush_hash_patch_A[2] = (flush_hash_patch_A[2] & ~0x7c0) | (mb2 << 6);
-	flush_hash_patch_B[0] = (flush_hash_patch_B[0] & ~0xffff) | hmask;
-	flush_icache_range((unsigned long) &flush_hash_patch_A[0],
-			   (unsigned long) &flush_hash_patch_B[1]);
-
-	if ( ppc_md.progress ) ppc_md.progress("hash:done", 0x205);
-}
diff --git a/arch/ppc/mm/tlb.c b/arch/ppc/mm/tlb.c
deleted file mode 100644
index 4ff260bc9dd..00000000000
--- a/arch/ppc/mm/tlb.c
+++ /dev/null
@@ -1,183 +0,0 @@
-/*
- * This file contains the routines for TLB flushing.
- * On machines where the MMU uses a hash table to store virtual to
- * physical translations, these routines flush entries from the
- * hash table also.
- *  -- paulus
- *
- *  Derived from arch/ppc/mm/init.c:
- *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *
- *  Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au)
- *  and Cort Dougan (PReP) (cort@cs.nmt.edu)
- *    Copyright (C) 1996 Paul Mackerras
- *  Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk).
- *
- *  Derived from "arch/i386/mm/init.c"
- *    Copyright (C) 1991, 1992, 1993, 1994  Linus Torvalds
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/highmem.h>
-#include <linux/pagemap.h>
-#include <asm/tlbflush.h>
-#include <asm/tlb.h>
-
-#include "mmu_decl.h"
-
-/*
- * Called when unmapping pages to flush entries from the TLB/hash table.
- */
-void flush_hash_entry(struct mm_struct *mm, pte_t *ptep, unsigned long addr)
-{
-	unsigned long ptephys;
-
-	if (Hash != 0) {
-		ptephys = __pa(ptep) & PAGE_MASK;
-		flush_hash_pages(mm->context.id, addr, ptephys, 1);
-	}
-}
-
-/*
- * Called by ptep_set_access_flags, must flush on CPUs for which the
- * DSI handler can't just "fixup" the TLB on a write fault
- */
-void flush_tlb_page_nohash(struct vm_area_struct *vma, unsigned long addr)
-{
-	if (Hash != 0)
-		return;
-	_tlbie(addr);
-}
-
-/*
- * Called at the end of a mmu_gather operation to make sure the
- * TLB flush is completely done.
- */
-void tlb_flush(struct mmu_gather *tlb)
-{
-	if (Hash == 0) {
-		/*
-		 * 603 needs to flush the whole TLB here since
-		 * it doesn't use a hash table.
-		 */
-		_tlbia();
-	}
-}
-
-/*
- * TLB flushing:
- *
- *  - flush_tlb_mm(mm) flushes the specified mm context TLB's
- *  - flush_tlb_page(vma, vmaddr) flushes one page
- *  - flush_tlb_range(vma, start, end) flushes a range of pages
- *  - flush_tlb_kernel_range(start, end) flushes kernel pages
- *
- * since the hardware hash table functions as an extension of the
- * tlb as far as the linux tables are concerned, flush it too.
- *    -- Cort
- */
-
-/*
- * 750 SMP is a Bad Idea because the 750 doesn't broadcast all
- * the cache operations on the bus.  Hence we need to use an IPI
- * to get the other CPU(s) to invalidate their TLBs.
- */
-#ifdef CONFIG_SMP_750
-#define FINISH_FLUSH	smp_send_tlb_invalidate(0)
-#else
-#define FINISH_FLUSH	do { } while (0)
-#endif
-
-static void flush_range(struct mm_struct *mm, unsigned long start,
-			unsigned long end)
-{
-	pmd_t *pmd;
-	unsigned long pmd_end;
-	int count;
-	unsigned int ctx = mm->context.id;
-
-	if (Hash == 0) {
-		_tlbia();
-		return;
-	}
-	start &= PAGE_MASK;
-	if (start >= end)
-		return;
-	end = (end - 1) | ~PAGE_MASK;
-	pmd = pmd_offset(pgd_offset(mm, start), start);
-	for (;;) {
-		pmd_end = ((start + PGDIR_SIZE) & PGDIR_MASK) - 1;
-		if (pmd_end > end)
-			pmd_end = end;
-		if (!pmd_none(*pmd)) {
-			count = ((pmd_end - start) >> PAGE_SHIFT) + 1;
-			flush_hash_pages(ctx, start, pmd_val(*pmd), count);
-		}
-		if (pmd_end == end)
-			break;
-		start = pmd_end + 1;
-		++pmd;
-	}
-}
-
-/*
- * Flush kernel TLB entries in the given range
- */
-void flush_tlb_kernel_range(unsigned long start, unsigned long end)
-{
-	flush_range(&init_mm, start, end);
-	FINISH_FLUSH;
-}
-
-/*
- * Flush all the (user) entries for the address space described by mm.
- */
-void flush_tlb_mm(struct mm_struct *mm)
-{
-	struct vm_area_struct *mp;
-
-	if (Hash == 0) {
-		_tlbia();
-		return;
-	}
-
-	for (mp = mm->mmap; mp != NULL; mp = mp->vm_next)
-		flush_range(mp->vm_mm, mp->vm_start, mp->vm_end);
-	FINISH_FLUSH;
-}
-
-void flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr)
-{
-	struct mm_struct *mm;
-	pmd_t *pmd;
-
-	if (Hash == 0) {
-		_tlbie(vmaddr);
-		return;
-	}
-	mm = (vmaddr < TASK_SIZE)? vma->vm_mm: &init_mm;
-	pmd = pmd_offset(pgd_offset(mm, vmaddr), vmaddr);
-	if (!pmd_none(*pmd))
-		flush_hash_pages(mm->context.id, vmaddr, pmd_val(*pmd), 1);
-	FINISH_FLUSH;
-}
-
-/*
- * For each address in the range, find the pte for the address
- * and check _PAGE_HASHPTE bit; if it is set, find and destroy
- * the corresponding HPTE.
- */
-void flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
-		     unsigned long end)
-{
-	flush_range(vma->vm_mm, start, end);
-	FINISH_FLUSH;
-}