Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6

Conflicts:

	Documentation/powerpc/booting-without-of.txt
	drivers/atm/Makefile
	drivers/net/fs_enet/fs_enet-main.c
	drivers/pci/pci-acpi.c
	net/8021q/vlan.c
	net/iucv/iucv.c

1 files changed, 0 insertions, 350 deletions

diff --git a/arch/ppc/platforms/4xx/ocotea.c b/arch/ppc/platforms/4xx/ocotea.c
deleted file mode 100644
index 308386ef6f7..00000000000
--- a/arch/ppc/platforms/4xx/ocotea.c
+++ /dev/null
@@ -1,350 +0,0 @@
-/*
- * Ocotea board specific routines
- *
- * Matt Porter <mporter@kernel.crashing.org>
- *
- * Copyright 2003-2005 MontaVista Software Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/reboot.h>
-#include <linux/pci.h>
-#include <linux/kdev_t.h>
-#include <linux/types.h>
-#include <linux/major.h>
-#include <linux/blkdev.h>
-#include <linux/console.h>
-#include <linux/delay.h>
-#include <linux/initrd.h>
-#include <linux/seq_file.h>
-#include <linux/root_dev.h>
-#include <linux/tty.h>
-#include <linux/serial.h>
-#include <linux/serial_core.h>
-#include <linux/serial_8250.h>
-
-#include <asm/system.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/dma.h>
-#include <asm/io.h>
-#include <asm/machdep.h>
-#include <asm/ocp.h>
-#include <asm/pci-bridge.h>
-#include <asm/time.h>
-#include <asm/todc.h>
-#include <asm/bootinfo.h>
-#include <asm/ppc4xx_pic.h>
-#include <asm/ppcboot.h>
-#include <asm/tlbflush.h>
-
-#include <syslib/gen550.h>
-#include <syslib/ibm440gx_common.h>
-
-extern bd_t __res;
-
-static struct ibm44x_clocks clocks __initdata;
-
-static void __init
-ocotea_calibrate_decr(void)
-{
-	unsigned int freq;
-
-	if (mfspr(SPRN_CCR1) & CCR1_TCS)
-		freq = OCOTEA_TMR_CLK;
-	else
-		freq = clocks.cpu;
-
-	ibm44x_calibrate_decr(freq);
-}
-
-static int
-ocotea_show_cpuinfo(struct seq_file *m)
-{
-	seq_printf(m, "vendor\t\t: IBM\n");
-	seq_printf(m, "machine\t\t: PPC440GX EVB (Ocotea)\n");
-	ibm440gx_show_cpuinfo(m);
-	return 0;
-}
-
-static inline int
-ocotea_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	static char pci_irq_table[][4] =
-	/*
-	 *	PCI IDSEL/INTPIN->INTLINE
-	 * 	   A   B   C   D
-	 */
-	{
-		{ 23, 23, 23, 23 },	/* IDSEL 1 - PCI Slot 0 */
-		{ 24, 24, 24, 24 },	/* IDSEL 2 - PCI Slot 1 */
-		{ 25, 25, 25, 25 },	/* IDSEL 3 - PCI Slot 2 */
-		{ 26, 26, 26, 26 },	/* IDSEL 4 - PCI Slot 3 */
-	};
-
-	const long min_idsel = 1, max_idsel = 4, irqs_per_slot = 4;
-	return PCI_IRQ_TABLE_LOOKUP;
-}
-
-static void __init ocotea_set_emacdata(void)
-{
-	struct ocp_def *def;
-	struct ocp_func_emac_data *emacdata;
-	int i;
-
-	/*
-	 * Note: Current rev. board only operates in Group 4a
-	 * mode, so we always set EMAC0-1 for SMII and EMAC2-3
-	 * for RGMII (though these could run in RTBI just the same).
-	 *
-	 * The FPGA reg 3 information isn't even suitable for
-	 * determining the phy_mode, so if the board becomes
-	 * usable in !4a, it will be necessary to parse an environment
-	 * variable from the firmware or similar to properly configure
-	 * the phy_map/phy_mode.
-	 */
-	/* Set phy_map, phy_mode, and mac_addr for each EMAC */
-	for (i=0; i<4; i++) {
-		def = ocp_get_one_device(OCP_VENDOR_IBM, OCP_FUNC_EMAC, i);
-		emacdata = def->additions;
-		if (i < 2) {
-			emacdata->phy_map = 0x00000001;	/* Skip 0x00 */
-			emacdata->phy_mode = PHY_MODE_SMII;
-		}
-		else {
-			emacdata->phy_map = 0x0000ffff; /* Skip 0x00-0x0f */
-			emacdata->phy_mode = PHY_MODE_RGMII;
-		}
-		if (i == 0)
-			memcpy(emacdata->mac_addr, __res.bi_enetaddr, 6);
-		else if (i == 1)
-			memcpy(emacdata->mac_addr, __res.bi_enet1addr, 6);
-		else if (i == 2)
-			memcpy(emacdata->mac_addr, __res.bi_enet2addr, 6);
-		else if (i == 3)
-			memcpy(emacdata->mac_addr, __res.bi_enet3addr, 6);
-	}
-}
-
-#define PCIX_READW(offset) \
-	(readw(pcix_reg_base+offset))
-
-#define PCIX_WRITEW(value, offset) \
-	(writew(value, pcix_reg_base+offset))
-
-#define PCIX_WRITEL(value, offset) \
-	(writel(value, pcix_reg_base+offset))
-
-/*
- * FIXME: This is only here to "make it work".  This will move
- * to a ibm_pcix.c which will contain a generic IBM PCIX bridge
- * configuration library. -Matt
- */
-static void __init
-ocotea_setup_pcix(void)
-{
-	void *pcix_reg_base;
-
-	pcix_reg_base = ioremap64(PCIX0_REG_BASE, PCIX_REG_SIZE);
-
-	/* Enable PCIX0 I/O, Mem, and Busmaster cycles */
-	PCIX_WRITEW(PCIX_READW(PCIX0_COMMAND) | PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER, PCIX0_COMMAND);
-
-	/* Disable all windows */
-	PCIX_WRITEL(0, PCIX0_POM0SA);
-	PCIX_WRITEL(0, PCIX0_POM1SA);
-	PCIX_WRITEL(0, PCIX0_POM2SA);
-	PCIX_WRITEL(0, PCIX0_PIM0SA);
-	PCIX_WRITEL(0, PCIX0_PIM0SAH);
-	PCIX_WRITEL(0, PCIX0_PIM1SA);
-	PCIX_WRITEL(0, PCIX0_PIM2SA);
-	PCIX_WRITEL(0, PCIX0_PIM2SAH);
-
-	/* Setup 2GB PLB->PCI outbound mem window (3_8000_0000->0_8000_0000) */
-	PCIX_WRITEL(0x00000003, PCIX0_POM0LAH);
-	PCIX_WRITEL(0x80000000, PCIX0_POM0LAL);
-	PCIX_WRITEL(0x00000000, PCIX0_POM0PCIAH);
-	PCIX_WRITEL(0x80000000, PCIX0_POM0PCIAL);
-	PCIX_WRITEL(0x80000001, PCIX0_POM0SA);
-
-	/* Setup 2GB PCI->PLB inbound memory window at 0, enable MSIs */
-	PCIX_WRITEL(0x00000000, PCIX0_PIM0LAH);
-	PCIX_WRITEL(0x00000000, PCIX0_PIM0LAL);
-	PCIX_WRITEL(0x80000007, PCIX0_PIM0SA);
-
-	eieio();
-}
-
-static void __init
-ocotea_setup_hose(void)
-{
-	struct pci_controller *hose;
-
-	/* Configure windows on the PCI-X host bridge */
-	ocotea_setup_pcix();
-
-	hose = pcibios_alloc_controller();
-
-	if (!hose)
-		return;
-
-	hose->first_busno = 0;
-	hose->last_busno = 0xff;
-
-	hose->pci_mem_offset = OCOTEA_PCI_MEM_OFFSET;
-
-	pci_init_resource(&hose->io_resource,
-			OCOTEA_PCI_LOWER_IO,
-			OCOTEA_PCI_UPPER_IO,
-			IORESOURCE_IO,
-			"PCI host bridge");
-
-	pci_init_resource(&hose->mem_resources[0],
-			OCOTEA_PCI_LOWER_MEM,
-			OCOTEA_PCI_UPPER_MEM,
-			IORESOURCE_MEM,
-			"PCI host bridge");
-
-	hose->io_space.start = OCOTEA_PCI_LOWER_IO;
-	hose->io_space.end = OCOTEA_PCI_UPPER_IO;
-	hose->mem_space.start = OCOTEA_PCI_LOWER_MEM;
-	hose->mem_space.end = OCOTEA_PCI_UPPER_MEM;
-	hose->io_base_virt = ioremap64(OCOTEA_PCI_IO_BASE, OCOTEA_PCI_IO_SIZE);
-	isa_io_base = (unsigned long) hose->io_base_virt;
-
-	setup_indirect_pci(hose,
-			OCOTEA_PCI_CFGA_PLB32,
-			OCOTEA_PCI_CFGD_PLB32);
-	hose->set_cfg_type = 1;
-
-	hose->last_busno = pciauto_bus_scan(hose, hose->first_busno);
-
-	ppc_md.pci_swizzle = common_swizzle;
-	ppc_md.pci_map_irq = ocotea_map_irq;
-}
-
-
-TODC_ALLOC();
-
-static void __init
-ocotea_early_serial_map(void)
-{
-	struct uart_port port;
-
-	/* Setup ioremapped serial port access */
-	memset(&port, 0, sizeof(port));
-	port.membase = ioremap64(PPC440GX_UART0_ADDR, 8);
-	port.irq = UART0_INT;
-	port.uartclk = clocks.uart0;
-	port.regshift = 0;
-	port.iotype = UPIO_MEM;
-	port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
-	port.line = 0;
-
-	if (early_serial_setup(&port) != 0) {
-		printk("Early serial init of port 0 failed\n");
-	}
-
-#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
-	/* Configure debug serial access */
-	gen550_init(0, &port);
-
-	/* Purge TLB entry added in head_44x.S for early serial access */
-	_tlbie(UART0_IO_BASE, 0);
-#endif
-
-	port.membase = ioremap64(PPC440GX_UART1_ADDR, 8);
-	port.irq = UART1_INT;
-	port.uartclk = clocks.uart1;
-	port.line = 1;
-
-	if (early_serial_setup(&port) != 0) {
-		printk("Early serial init of port 1 failed\n");
-	}
-
-#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
-	/* Configure debug serial access */
-	gen550_init(1, &port);
-#endif
-}
-
-static void __init
-ocotea_setup_arch(void)
-{
-	ocotea_set_emacdata();
-
-	ibm440gx_tah_enable();
-
-	/*
-	 * Determine various clocks.
-	 * To be completely correct we should get SysClk
-	 * from FPGA, because it can be changed by on-board switches
-	 * --ebs
-	 */
-	ibm440gx_get_clocks(&clocks, 33300000, 6 * 1843200);
-	ocp_sys_info.opb_bus_freq = clocks.opb;
-
-	/* Setup TODC access */
-	TODC_INIT(TODC_TYPE_DS1743,
-			0,
-			0,
-			ioremap64(OCOTEA_RTC_ADDR, OCOTEA_RTC_SIZE),
-			8);
-
-	/* init to some ~sane value until calibrate_delay() runs */
-        loops_per_jiffy = 50000000/HZ;
-
-	/* Setup PCI host bridge */
-	ocotea_setup_hose();
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	if (initrd_start)
-		ROOT_DEV = Root_RAM0;
-	else
-#endif
-#ifdef CONFIG_ROOT_NFS
-		ROOT_DEV = Root_NFS;
-#else
-		ROOT_DEV = Root_HDA1;
-#endif
-
-	ocotea_early_serial_map();
-
-	/* Identify the system */
-	printk("IBM Ocotea port (MontaVista Software, Inc. <source@mvista.com>)\n");
-}
-
-static void __init ocotea_init(void)
-{
-	ibm440gx_l2c_setup(&clocks);
-}
-
-void __init platform_init(unsigned long r3, unsigned long r4,
-		unsigned long r5, unsigned long r6, unsigned long r7)
-{
-	ibm440gx_platform_init(r3, r4, r5, r6, r7);
-
-	ppc_md.setup_arch = ocotea_setup_arch;
-	ppc_md.show_cpuinfo = ocotea_show_cpuinfo;
-	ppc_md.get_irq = NULL;		/* Set in ppc4xx_pic_init() */
-
-	ppc_md.calibrate_decr = ocotea_calibrate_decr;
-	ppc_md.time_init = todc_time_init;
-	ppc_md.set_rtc_time = todc_set_rtc_time;
-	ppc_md.get_rtc_time = todc_get_rtc_time;
-
-	ppc_md.nvram_read_val = todc_direct_read_val;
-	ppc_md.nvram_write_val = todc_direct_write_val;
-#ifdef CONFIG_KGDB
-	ppc_md.early_serial_map = ocotea_early_serial_map;
-#endif
-	ppc_md.init = ocotea_init;
-}